User`s Manual - General Digital
Contents
1. reliability screening quality conformance qualifications or any combination thereof These provisions supersede any part of the other clauses relating to the same project A Delivery dates are best estimates only and are subject to 1 Receipt by Seller of order and negotiated specifications containing where applicable all quoted waivers and or exceptions 2 successful first time passage of products submitted to electrical performance test to environmental and or life test processing required by applicable specifications B Seller assumes no responsibility for refund or replacement of products shipped at the Buyer s request prior to successful completion of acceptance and or qualification test performed by Seller except those subject only to Buyer s incoming visual inspection 5 PATENTS Seller shall defend any suit or proceeding which is based on a claim that any products or part thereof furnished under this contract constitutes an infringement of any valid United States patent if notified promptly in writing and given authority information and assistance for the defense or settlement of same In case said product or part thereof is in such suit held to constitute infringement and the use of said product or part is enjoined then Seller shall at its own RGB Industrial User s Manual expense and at its option either procure for the Buyer the right to continue using said product or part or replace same with n2. VGA Input Connector 15 pin High Density Enclosure Mating Connector GD Part No 30 238 30 239 Manufacturer Amphenol or equivalent Amphenol or equivalent Manufacturer Part No 17HDO15SAA000 17HDO15PAA000 Red 1 2 Green 3 Blue 4 5 Ground 6 Red Return 7 Green Return 8 Blue Return 9 10 Ground 11 12 ee 13 H Sync 14 V Sync 15 Serial Touch Connector 9 pin D Sub Enclosure Mating Connector GD Part No 30 045 30 026 Manufacturer Amphenol Amphenol Manufacturer Part No DE 9S DE 9P 2 RX 30 045 3 TX T 4 DTR 5 Ground 30 026 DSR 7 RTS 8 CTS 9 RI GENERAL RGB Industrial User s Manual Ca DIGITAL The Innovators of Flat Panel Technology gt The Innovators of Flat Panel Technology FAILURE POSSIBLE CAUSE SOLUTION i No Image No Power If the Green LED on the front bezel is illuminated it indicates that the power supply is functional and connected properly If the LED does not function properly continue with the next set of instructions No Image Defective AC Cable Verify that the power supply is properly connected to the Connection LCD monitor and an AC power source i e wall outlet Inspect cable for physical damage No Image Defective Power Supply Verify that external power supply is functional No Image No Signal Incorrect Verify that a video signal of compatible resolution and Graphi
3. but not limited to any right to cancellation and bill back charges If Seller continues to make shipments after Buyer default action shall not constitute a waiver nor affect Seller s legal remedies B Cancellation Standard Products Buyer is responsible for one hundred percent 100 payment if any order scheduled for delivery within thirty 30 days is canceled Upon written notice to Seller Buyer may cancel any order for standard products scheduled for shipment beyond thirty 30 days after Seller receives Buyer s cancellation notice Buyer shall be liable for any applicable bill back charges resulting from such cancellation Buyer shall also pay as a rescheduling restocking charge twenty five percent 25 of the price specified on order sheet for each canceled product unless Buyer reschedules the order for delivery within one hundred twenty days 120 days C Cancellation Custom Products If Buyer cancels orders or products containing d esign markings packaging or other specifications unique to Buyer Buyer shall pay the following cancellation charges in addition to any applicable bill back charges Percentage of Purchase Price to be Paid Upon Cancellation Notice Number of Days Before Scheduled Delivery that Written Cancellation is Received 100 0 30 75 31 60 50 61 90 20 91 120 10 SEVERABILITY In case any one or more of the provisions or parts of a provision contained in th
4. price charged shall include no consideration for such property unless specifically so stated on the face of Seller s Standard Terms and Conditions of Sale Listing as a separate line item and separately billing for Non Recurring Engineering Engineering Services does not accrue to Buyer rights in any of the aforementioned property of Seller unless specifically stated on the face of Seller s Standard Terms and Conditions of Sale B Buyer acknowledges that propriety property of Seller is a valuable business asset of Seller and that unauthorized use or disclosure of such would result in irreparable damage to Seller Buyer agrees that it will use proprietary information of Seller only for the purposes intended and necessitated by this order not otherwise use or disclose any proprietary information of Seller without Seller s express informed written consent take all reasonable precautions to insure protection against use or disclosure and return at Seller s request all proprietary property of Seller which is in the possession or control of Buyer C Any data information specifications processes drawings designs plans know how etc of Buyer supplied to Seller in conjunction with this order must be considered free from proprietary restrictions unless expressly agreed otherwise in writing signed by and authorized by an officer of General Digital Corporation RGB Industrial User s Manual Contact Informatio
5. prior to such delivery The duration of the Warranty shall be one 1 year from the date of delivery as set forth above This Warranty shall be effective only if Seller receives notice of such defects in materials and workmanship during the period of the Warranty stated above After Seller receives such notice Buyer shall obtain a Return Material Authorization hereafter RMA number To obtain an RMA number Buyer shall contact Seller s Customer Service Department with the model number s serial number s and original purchase order number s of the product or products Buyer shall include a brief description of the problem or failure mode experienced Buyer shall mark the outside of the package containing the product or products conspicuously with the etters RMA and the number assigned by Seller Any packaged returned without RMA and the RMA number clearly visible will be rejected at Seller s receiving dock After Buyer has provided notice and obtained the appropriate RMA number Buyer shall return the product upon request to General Digital Corporation 8 Nutmeg Road South South Windsor CT 06074 not later than thirty 80 days after Seller s receipt of notice of the alleged problem or failure mode Buyer shall prepay all transportation charges for return of the product s to Seller Seller shall pay for the cost of sending the product s back to Buyer Transportation charges to Buyer shall be deemed Best Way and any other transp
6. the temperature rises to a normal operating level If a still picture is displayed for a long time a residual image may appear for a while The residual image will eventually disappear The LCD panel becomes warm during operation This is not a malfunction Important Notes on the LCD Screen Characteristics Please be aware that although the LCD screen is made with high precision technology the manufacturer s specifications allow for slight optical anomalies If your LCD screen exhibits any minor anomalies it is not an indication of a malfunction General Digital inspects each screen to even more rigid specifications than the manufacturer s and will not ship any product found to be substandard Also optimal performance is achieved after the monitor has reached a stable internal operating temperature At ambient room temperature 72 F 22 C this may require as long as 30 60 minutes Ci GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Precautions ninen 5 Replacement of the Fluorescent Tube A specially designed fluorescent tube is installed as the lighting apparatus for this mon itor If the screen becomes dark unstable or does not turn on replace the fluorescent tube with a new one Consult General Digital when replacing the fluorescent tube Maintenance e Be sure to unplug the power cord from the power outlet before cleaning your monitor e Clean the LCD screen wit
7. IM INOS MOS peot sumisa pun stopdeicy pruwa rja fo ssormaouus syg BOUWON LNOHLIM JONVHO 1 vi I 9 l gc gt Ol LO3 ENS SNOW VOISIDSdS IWUANAD ATNO INIMLNO WOINWHO3IN JHVH HOLOANNOOD 7600 56 10 00 PP 00Z A0L GD AMVIGYdOYd SNIVINOD LNZANOOD SIHL RGB Industrial User s Manual GDES DIGITAL The Innovators of Flat Panel Technology i D F wi n ntin JO UOW j uOd 30 4 VOXS L OZ lom snpu 89 woo Biguag mama Qo6z z8 2090 LO OSPUIM YNOS NOS Pedy SaunnN 8 sums Ag pun sdopdeacy young pg fo xeoronvouuy ayy RARE IWaANjAD SIW a330 wD OY SATOH ONLLNNOW tvah maaan eee a mw nom OL LOFANS SNOW VOIsIOadS 309 HIVI SI t 2930 LEO x OZ S7IOH ONUNNON 30S O000O RGB Industrial User s Manual vOVI L0 L0 00 62 708 M0Z2 d5 G3ONGOUdSY G3SO1NSIO 38 OL ION S ONY WU9IO WHINID JO NOUVNYOJINI AMWIZINdONd SNIVINOD ANGWNDOG SHL GDES DIGITAL The Innovators of Flat Panel Technology Warran GENERAL DIGITAL CORPORATION hereinafter Seller STANDARD TERMS AND CONDITIONS OF SALES 1 Acknowledgment and acceptance of any order by seller is expressly limited to and made conditional upon the terms and conditions contained herein Any of the buyer s terms and conditions which are in addition to or different from those contained herein and which are not separately agreed to in writing excep
8. User s Manual RGB Industrial Standalone Mountable LCD Monitor GD 10V Series GD 20W Series es as Ml A E h i Mss ee a gt a i WA 7 T Ixa Mi i UN lea pA sia mnnc TS ela R Wy 899 N Q Sey A Manual P N 01 550 Revision 1 0 GENERAL GITAL DI The Innovators of Flat Panel Technology Please take a moment to record the following information in the space provided below Should the need arise to contact General Digital regarding your LCD monitor this information will help us to better serve you You will find the model number serial number label affixed to the rear of your monitor Model Number Serial Number Date Received Trademarks All trademarks in this publication are the property of their respective companies Copyright Information in this document is subject to change without notice 2004 General Digital Corporation All rights reserved Reproduction in any manner whatsoever without the written permission of General Digital Corporation is strictly forbidden Disclaimer General Digital Corporation shall not be liable for errors contained herein or for inci dental or consequential damages in connection with the furnishing performance or use of this material Appropriate Usage Policy General Digital Corporation components should not be used in medical devices with life support functions safety equipment or similar applicat
9. c Card Settings refresh rate is being provided to the monitor No Image Defective Display Contact General Digital Service Department for a Return Backlight Inverter or Material Authorization RMA Internal Connection Dim Display OSD Settings Check Brightness and Contrast settings If either setting is too low the display will appear dim Dim Display Half life of Backlights Determine how many hours your monitor has been running Reached Backlights will be reduced to 50 original brightness after approximately 30 000 hours Contact General Digital Service Department for a Return Material Authorization RMA Flickering Pixels Uneven Screen Intensity Lack of Non OSD Brightness Control Defective LCD Panel or Internal Cable Improper Pinout If adjusting brightness control has no effect the VR rating or method of adjusting brightness is not compatible or correctly connected to the inverter Contact General Digital Service Department for a Return Material Authorization RMA Vertical Bars Video Cable Be sure that you are using a quality video cable General Flickering Pixels Digital recommends a shielded three wire coax R G B with twisted pair for Hsync and Vsync Replace the video cable Ensure that your video source supports VESA standards Vertical Bars OSD Settings Activate the OSD menu Select the Auto Setup function Flickering Pixels GENERAL DIGITAL If this does not correct the problem continu
10. e Display a 50 gray pattern on the LCD display If vertical bands are evident activate the OSD menu Adjust the Image Size function until the vertical bands vanish Use the Tuning function to fine tune the image RGB Industrial User s Manual Specifications 12 Display Size Diagonal 10 4 20 1 Resolution Pixels 640 x 480 1280 x 1024 Colors 262 144 16 7 Million Luminance Minimum 300 Nits 250 Nits Contrast 100 1 300 1 Hor Viewing Angle Min 70 85 Vert Viewing Angle Min 40 70 85 Operating Temperature Typ 10 60 C 0 50 C Dimensions H x W x D 10 00 x 12 00 x 3 50 16 3 x 19 50 x 4 00 Weight Operating 10 lbs 20 Ibs Power Consumption Max 17 Watts lt 75 Watts Input Voltage 12 VDC 85 132 amp 170 264 VAC 47 63Hz Contrast values listed reflect ideal conditions A variety of factors could result in reduced contrast Specifications subject to change without notice or obligation Values listed are for typical configurations For complete specifications please download the data sheet from our web site at http www GeneralDigital com or inquire with a Sales Engineer ca GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Options amp Accessories 13 Though the most popular options and accessories are listed here we have many others from which to choose Please visit our web site at http www Gen
11. eralDigital com or inquire with a Sales Engineer for details 01 Clear Float Glass Antiglare One Side 02 Clear Float Glass Antiglare Two Sides 03 Clear Float Glass Antireflective One Side 04 Clear Float Glass Antireflective Two Sides 21 Lexan Vandal Shield 31 Capacitive Touch Screen M A Antireflective Coating 32 Capacitive Touch Screen Industrial Antireflective Etch 51 Resistive Touch Screen 60 62 Solar Gray 72 Gloss Etch Antireflective Coating One Side Bonded 61 75 Solar Gray 72 Gloss Etch Antireflective Coating One Side Unbonded 62 62 Solar Gray 72 Gloss Etch Antireflective Coating One Side Unbonded 63 75 Solar Gray 72 Gloss Etch Antireflective Coating One Side Bonded Most common display overlays listed Inquire with a Sales Engineer for other configurations TYPE INPUT INPUT OUTPUT LINE ENTRY POWER FACTOR VOLTAGE FREQUENCY POWER MODULE FILTER CORRECTION Internal 85 264 VAC 47 63 Hz 100 Watts 12 VDC Yes 0 95 Rear Mount 90 132 amp 47 63 Hz 300 Watts 12 VDC Yes 180 264 VAC Separate 85 264 VAC 47 63 Hz 66 Watts 12 VDC Yes 0 95 None 12 VDC Filtering and regulation supplied by customer Ci GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology I Drawin SNIMVYO BIWOS LON OC ra oe YOLINON T3NVd LV1d VOA 7 OL TWINLSNGNI 894 woo Byqueg Ma o06z zaz togo 4090 15 OSPU
12. h a soft cloth If you use a glass cleaning liquid refrain from using any type of cleaner containing an antistatic solution or similar additive as this may scratch the LCD s screen coating e Clean the cabinet panel and controls with a soft cloth lightly moistened with a mild detergent solution Do not use any type of abrasive pad scouring powder or solvent such as alcohol or benzine A scratched LCD surface may result if the screen surface is rubbed touched or tapped with sharp or abrasive items such as ballpoint pens or screwdrivers e Note that material deterioration or LCD screen coating degradation may occur if the monitor is exposed to volatile solvents such as insecticide or if prolonged contact is maintained with rubber or vinyl materials Transportation e Disconnect all cables from the monitor and grasp the support and base sections of the display stand firmly with both hands when transporting If you drop the monitor you may be injured or the monitor may be damaged e When you transport this monitor for repair or shipment use the original carton and packing materials Failure to do so may void the warranty Usage Recommendations e When unused for extended periods of time set your PC to DPMS If using a screen saver set it to the active screen mode e For each hour of looking at the monitor let your eyes rest for 5 minutes This will reduce eye fatigue Disposal of the Monitor The fluorescent tube used in thi
13. he Innovators of Flat Panel Technology Precautions 4 Installation General Digital recommends that you install or leave the monitor In a place free of extreme temperatures i e away from radiators heating vents direct sunlight In a place free of mechanical vibration and shock In a place far from any equipment that generates a strong magnetic field In a place free of inordinate amounts of dust dirt or sand i e an open window or outdoor exit If setting up temporarily in an outdoor environment be sure to take adequate precautions against airborne dust and dirt On a stable surface where the monitor will be safe from tipping over Ensure that vents are kept free of obstruction and airflow remains unrestricted at all times If the unit is equipped with a grounded AC line input connector ensure that a reliable grounding path is maintained Units so equipped are intended to be connected to ground Ensure that the unit is located where the temperature remains within the recom mended ambient temperature range listed in the Specifications Characteristics of the LCD Screen Keep the LCD from facing direct sunlight for extended periods as this can damage the screen The LCD screen may lose uniformity or otherwise malfunction if pushed scratched or has a heavy object set upon it If the monitor is used in a cold place a residual image may appear on the screen This is not a malfunction The screen returns to normal as
14. ions where component failure would result in loss of life or physical harm aerospace equipment telecom munication equipment trunk lines or nuclear power control equipment Contact a General Digital representative before using General Digital devices for any applica tions other than those recommended by General Digital General Digital assumes no responsibility for any damage resulting from the use of a General Digital device which does not comply with the instructions and precautions specified in this manual GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Table of Content Precautions 528 ccsdcnnessntnieesutisctecisencapsesee seca cadsoseseseatecsstnentiden 4 Package 0 0 03 1 Be ene eer rr 6 Installation sess da raiivsavetsnccsticvecses tesa setesetintavasielaversntaveciseoien 7 RoI CUNO S sheds en sitcnd on usce errare esetre ssrin ai 8 Troubleshooting wai sidos ed cccessduaccccctescstonscessivinsenuscnasstedesentccs 11 Specifications sseeeeeeeeseesseeeeesssseesetessssssseeeessssseseeessssse 12 Options amp Accessories saicicscessisicocesscinseassiosndaveasecsetessessonns 13 Mechanical Drawings seeeeeessseeeressssesecessssssseeeeeeessseeee 14 WAGE AREY sic sala sesceseoces dated cece buse sisud Evari sdiaunuessaceteseszanse 16 Contact Information esseseeeseseeeeeeeeessssssssssssssessseseeeeeee 18 GENERAL RGB Industrial User s Manual DIGITAL T
15. is agreement shall for any reason be held to be invalid illegal or unenforceable in any respect such invalidity illegality or unenforceability shall not affect ay other provision or part of a provision of this agreement but this agreement shall be construed as if such invalid illegal or unenforceable provision or part of a provision had never been contained herein GENERAL DIGITAL The Innovators of Flat Panel Technology Warranty onines t 11 ARBITRATION Any controversy or claim arising out of or relating to this agreement shall at the option of either party be settled by arbitration in accordance with the rules of American Arbitration Association Provided however that in the event of a violation of the provisions of paragraph 13 General Digital shall be entitled to injunctive or other relief to enforce its rights under this agreement without prejudice to its rights under this paragraph Such injunctive or equitable relief shall not preclude the award of monetary damages if appropriate The parties acknowledge that by agreeing to this provision each waives its right to a jury trial in exchange for a quicker and less expensive method of resolving any dispute concerning this agreement or anything relating thereto 12 CONTROLLING LAW This Agreement shall be governed by subject to and construed according to the laws of the State of Connecticut For purposes of applying to Connecticut law this Agreement shall be deemed t
16. k station or composite NTSC PAL video source to the video connector s located on the rear of the LCD monitor 3 A If your monitor came supplied with an attached or internal power supply plug one end of the supplied line cord into the AC socket located on the rear of the LCD monitor and the other end into a grounded 110 220V AC outlet B If your monitor came supplied with a separate power supply first attach the DC power supply to the unit Then plug one end of the supplied line cord into the AC socket located on the rear of the DC power supply and the other end into a grounded 110 220V AC outlet 4 Place the AC line switch in the ON or position 5 Activate the LCD monitor by pressing the On Off button located on the membrane keypad Note The yellow red LED STANDBY located on the front bezel will illuminate if the video cable is not attached or an invalid video source is connected to the monitor The green LED POWER will illuminate if proper power and a valid video source have been applied to the system 6 Although factory calibrated for optimal image quality from time to time you may need to override the factory default settings of your monitor To adjust the monitor settings please refer to the LCD Monitor Calibration amp Setup Guide for your unit The Documentation CD packaged with your monitor will explain how to determine the appropriate document GENERAL RGB Industrial User s Manual DIGITAL The Inn
17. n 18 We want you to be completely satisfied with your product Please feel welcome to contact us should you require any of our services General Digital Corporation 8 Nutmeg Road South South Windsor CT 06074 Phone 860 282 2900 Toll Free 800 952 2535 Fax 860 282 2244 Hours Monday Friday 9 00 a m 5 00 p m EST Web http www GeneralDigital com Sales Phone 860 282 2900 Option 1 Fax 860 282 2244 E mail gd_mn GeneralDigital com Service Phone 860 282 2900 Option 4 Fax 860 282 0198 E mail service GeneralDigital com In your correspondence with the Service Department please provide the following information e Company name Company address e Contact name Contact phone and fax numbers You can expect to receive a reply within one business day GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology
18. o have entered into and wholly performed in Connecticut Buyer warrants and it is a condition of this acknowledgment that Buyer has complied and will continue to comply with applicable laws regulations and order of the United States Government and of any state or political subdivision thereof including all statutes regulations and directives that are applicable to Buyer s purchase thereunder Without limiting the foregoing Buyer further warrants that they have complied with all applicable provisions of the Fair Labor Standards Act of 1938 as amended and all regulations and orders issued by the US Department of Labor as well as US export regulations including but not limited to the International Trafficking and Arms Regulations ITAR Buyer further agrees to defend indemnify and hold Seller harmless from and against claims losses damages costs and expenses that may be sustained by reason of Buyer s failure to meet any of the above requirements 13 PROPRIETARY RIGHTS AND CONFIDENTIALITY A Rights in any and all of Seller s information know how trademarks data trade secrets inventions patents plans drawings specifications processes designs etc whether or not acquired or reduced to practice during the course or as a result of this order shall remain the property of Seller and Seller shall not be obligated to provide any of such property to Buyer Buyer shall obtain no rights in any of such property and the
19. of the product s shall not change or enhance this warranty in any way Buyer s reliance on Seller s skill or judgment to select or furnish suitable goods shall be at Buyer s risk Seller shall not be liable for any direct indirect special incidental or consequential damages including but not limited to loss of profits and or destruction of other property caused by any application of the product s and or its integration with other components Seller s liability shall be limited to the amount paid by the Buyer for the product s The aforementioned remedies are in lieu of and exclude all others Buyer assumes all other risks and liabilities for loss damages or injury whether or not caused by Seller s negligence to persons or property and arising out of connected with or resulting from the use of Seller s products or services either alone or in combination with other products or services Seller specifically excludes any and all other warranties written or oral including but not limited to implied warranties of merchantability and fitness for a particular purpose 4 SPECIAL PRODUCTS The following provisions are to be considered a part of all Special Product Acknowledgments and Orders Special Product orders are those calling for products not contained in Seller s current catalog and price list or those requiring modifications to catalog products or those requiring sample environmental mechanical or life testing 100
20. on infringing comparable products or modify it so it becomes non infringing or refund the purchase price thereof The forgoing states the entire liability of Seller for patent infringement by said product or part thereof 6 TERMS OF PAYMENT Payment terms for sales within the USA are Net Thirty 30 days from date of shipment International sales require a Letter of Credit on a US Bank prior to shipment from Seller 7 TITLE AND DELIVERY All shipments within the 48 contiguous United States by Seller shall be EO B point of shipment Title to hardware products and risk of loss pass to Buyer upon delivery to carrier at shipping point Buyer shall pay all transportation and storage charges Seller will select the carrier if Buyer does not Claims for shortages must be made with Ten 10 days after receipt of the order 8 CONTINGENCIES Seller shall not be responsible for any failure to perform due to unforeseen circumstances or to causes beyond its control Examples of such causes are acts of God War Riot Embargoes Acts of Civil or Military Authorities Fire Floods Accidents Strikes or Shortages of Transportation Facilities Fuel Energy Labor or Materials Seller may defer delivery for a period equal to the delay caused by such contingency 9 CANCELLATION A Default If Buyer defaults Seller may decline to make further shipments and or may terminate Buyer s order without affecting Seller s rights and remedies including
21. ortation charges shall be at the Buyer s cost All costs of customs clearance shipping and any other related charges for transportation outside of the contiguous 48 United States shall be at the Buyer s expense After Buyer s compliance Seller shall at Seller s option repair or replace the product s Excluded from this Warranty are all problems or failures resulting from e Improper or inadequate maintenance of the product by the Buyer GENERAL DIGITAL The Innovators of Flat Panel Technology e Unauthorized modification of the product by any means Operation of the product outside its environmental specifications e Neglect misuse or abuse of the product e Modification or integration with other components not covered by a Seller warranty when such integration increases the likelihood of problems failures or damage Further this warranty is between seller and buyer only and does not extend to buyer s customers or users of buyer s products In addition and in the event that buyer integrates seller s product with components manufactured or supplied by any other company this warranty shall only relate to defects in materials and workmanship of seller s product and not to problems with or failures of seller s product caused by other components integrated with it Seller s rendering of technical advise and or assistance or Seller s performance of service work in connection with Buyer s order
22. ovators of Flat Panel Technology Connections 8 General Digital s LCD monitors are equipped with several types of connectors to suit a variety of purposes To reference the information about the connectors on your unit simply match the connectors on your unit with the photos on these pages AC Power Connector Line Entry Filter IEC type GD Part No 16 011 16 020 Manufacturer Corcom Corcom Manufacturer Part No PSOSSSS30 PSOSSSS6B 16 011 16 020 DC Power Input Connector 6 pin Circular Enclosure Mating Connector GD Part No 30 356 30 357 Manufacturer Hirose Hirose Manufacturer Part No RM12BRD 6S RM12BPG 6PH 1 12 VDC 2 12 VDC 3 Ground 4 Ground 5 Bae 6 30 357 ca GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Connections ninen 9 DC Power Input Connector 3 pin 3W3 Enclosure Mating Connector GD Part No 30 425 30 364 30 382 Manufacturer Cinch ITT Cannon Cinch Manufacturer Part No 008 0328 3 DAMC3H3PJK87 008 00334 4 O 1 Al 12 VDC 30 425 2 A2 3 A3 Ground g F 30 364 30 382 DC Power Input Connector 3 pin Kycon Enclosure Mating Connector GD Part No 30 482 30 332 Manufacturer Kycon Kycon Manufacturer Part No KPJ 3S KPP 3P 12 VDC 2 Return 3 ca GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Connections ninen 10
23. s monitor contains mercury Disposal of this monitor must be carried out in accordance with the regulations of your local sanitation authority Do not dispose of this monitor with general household waste GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Package Contents 6 Please take a moment to ensure that you have received the following items Report any discrepancies immediately One 1 RGB Industrial model from one of the following LCD monitor families GD 10V Series GD 20W Series One 1 Documentation CD with User s Manuals and LCD Monitor Calibration amp Setup Guides in PDF format and Adobe Acrobat Reader software which is used for viewing the documentation One 1 AC Line Cord 6 7 unless a custom length is ordered One 1 Shipping Container Also included will be any options and or accessories you ordered with your monitor Please refer to the packing slip for a complete listing of items shipped IMPORTANT Please save your custom designed shipping container for warranty returns as needed Shipping in an unauthorized container may void the warranty GENERAL RGB Industrial User s Manual DIGITAL The Innovators of Flat Panel Technology Installation Standalone Mountable 1 Place your monitor on a stable desktop surface or affix it to a pedestal articu lating arm etc 2 Attach a shielded video cable connected at one end to your computer wor
24. t additional provisions specifying quality character of the products ordered and shipping instructions are hereby objected to and shall be of no effect The buyer shall be deemed to have assented to all terms and conditions contained herein if any part of the products described herein is accepted 2 ENTIRE AGREEMENT This instrument contains the entire and only agreement between the parties hereto relating to the subject matter hereof and any representation affirmation of fact and course of prior dealings promise or condition in connection therewith or usage of the trade not incorporated herein shall not be binding on either party The rights and obligations contained herein shall inure to and be bind upon the parties their legal representatives successors and permitted assigns 3 WARRANTY Seller warrants that upon delivery to the Buyer the product sold thereunder shall be free of defects in materials and workmanship and that such product shall substantially conform to the specifications provided by Seller This Warranty commences on the date of delivery to the Buyer unless another time for commencement has been negotiated between Seller and Buyer prior to such delivery Should the product be delivered through a third party UPS USPS Federal Express etc the warranty period shall commence on the date that such third party receives the product unless another time for commencement has been negotiated between Seller and Buyer
Download Pdf Manuals
Related Search