Home

User`s Manual - Security Alarm Shop

1. 47 TROUBLESHOOTING 48 APPENDIX 1 INSTALL Lo Sr SL SL ST 49 APPENDIX 2 PIN CONFIGURATION 54 APPENDIX 3 RS232 PROTOCOL 52 APPENDIX 4 RECORDING TIME TABLE 2 0 LL Lr er Lr Lr Lr Lo LL LT T 53 APPENDIX 5 COMPATIBLE USB FLASH DRIVE BRAND 55 APPENDIX 6 COMPATIBLE HDD BRAND cernere nnne nennen nnn nennt nnnnn 56 PARTS AND FEATURES 1 1 FEATURES MPEG4 DVR Technology Compression format providing crystal clear images with real time performance Multiplex Allow live display record playback backup and network at the same time Long Recording Hours Model 1 amp 2 500GB can record more than 18 days 4CH Frame Best Quality 30IPS Model 3 amp 4 500GB
2. Alarm control for Monitor Sensor PTZ 10 BASIC OPERATION The DVR offers three recording modes manual record event record and timer record If power is off accidentally recorded video files will still be still stored in the HDD DVR will return to the original recording status after power is on again 1 MANUAL RECORDING continuous recording Recording is initiated by manually pressing the REC button indicated by the sign on the screen 2 EVENT RECORDING triggered by motion and external alarm When this function is activated the recording is triggered by motion or external alarms indicated by the sign motion E external alarm on the screen 3 TIMER RECORDING scheduled time Recording is scheduled by Timer indicated by the sign TIMER RECORD There must be at least 8192 images of recorded data for playback to work properly If not your DVR will stop the playback For example if the IPS is set to 30 the recording time should be at least 2 3 seconds 8192 images 30 IPS for the playback to work properly When the recording function is activated please DO NOT change the date or time on your DVR The recorded data will be disordered and you will not be able to find the recorded file to backup by time search NOTE If users change the date or time accidentally when the recording function is activated it s recommended to clear all HDD data and start recording again
3. Overwriting View If you activate overwriting mode you will also see OW under the recording mode except the system time available HDD capacity recording icon and channel title When the HDD is full under OW recording mode the previous recorded files may be overwritten without further warning notice Under OW mode your DVR will clear 8GB data from the oldest for overwriting once the HDD is full Available Capacity of System Time Internal HDD Under HDD Overwriting Mode E Pb n9 Under Recording i NS mi T wu Channel Title PLAYBACK Press gt or PLAY button and the DVR will display the last recorded video 1 2 3 4 5 FAST FORWARD F F amp FAST REWIND REW You can increase the speed for fast forward and rewind on the DVR In the playback mode Press gt P once to get 4X speed forward and press twice to get 8X speed etc and the maximum speed is 32X Press 4 once to get 4X speed rewind and press twice to get 8X speed etc and the maximum speed is 32X The type of the recording image size Frame or CIF will also be shown on the screen PAUSE IMAGE Press I button to pause the current image displayed on the screen In the Pause mode Press gt P once to get one frame forward Press lt q 4 once to get one frame rewind STOP Pressing
4. button under all circumstances will return DVR to live monitoring mode CHANNEL SHIFT Display mode Press MODE FH button to 4 channels display Full Screen Switch Press 1 2 3 4 buttons to show the full screen channels x Channel display switch Press SET to change the the position of the channel display Press A V 4 P to select the channel you would like to change Press or to select the channel you would like show Press ENTER button to confirm the setting SLOW PLAYBACK Model 1 2 Press SLOW button to get 1 4X speed playback and press twice to get 1 8X Model 3 Press SLOW button to get 1 4X speed playback AUDIO SLOW ZOOM Press y AUDIO _ Laupio to select either audio channel from the following 4 options AUDIO 1 L audio channel 1 live audio AUDIO 1 P audio channel 1 playback audio AUDIO 2 L audio channel 2 live audio AUDIO 2 P audio channel 2 playback audio 12 DETAILED MENU CONFIGURATION 4 1 MENU TREE DATE DATE DATE YEAR MONTH DAY TITLE ADVANCE CAMERA _ RECORD MANUAL RECORD ENABLE EVENT RECORD ENABLE o gt 5 TIME HOUR MIN SEC START HH MM OVERWRITE RECORD IMG SIZE DISPLAY RECORD QUALITY COV FORMAT Y M D DETECTION DAYLIGHT SAVING TIMER RECORD ENABLE m TITLE DET
5. m o TITLE DISPLAY EXT ALERT MANUAL RECORD DATE DISPLAY IPS o fern REMOTE z C N N m EVENT RECORD IPS LOSSSCREEN KEY BUZZER ALARM _ PLAYBACK VLOSS BUZZER TIMER RECORD INFO IPS DETECTION TIMER MOTION BUZZER SYSTEM ALARM BUZZER SERIAL TYPE HDD BUZZER BAUD RATE HDD NEARLY FULL DWELL TOTAL IPS SHARE SEC TITLE INTERLACE DEVICE ALARM DURATION PASSWORD SEC MONITOR OUT RESET DEFAULT PRE ALARM PROTOCOL CLEAR HDD UPGRADE WATERMARK NETWORK AUTO KEYLOCK The USB backup function is only BACKUP for Model 1 Model 2 and Model 4 The disk backup function is only for Model 1 LANGUAGE VERSION EVENT LOG VIDEO FORMAT n OO MAIN MENU OPTIONS RECORD Press MENU button to enter the main menu list The default admin password is 0000 Enter the default password and press ENTER Users could alter the password later Please refer to Section 4 11 ADVANCE MENU SYSTEM Move the cursor to RECORD and press ENTER The screen will show the following options RECORD MANUAL RECORD ENABLE EVENT RECORD ENABLE MENU TIMER RECORD ENABLE RECORD OVERWRITE TIMER RECORD IMG SIZE DATE RECORD QUALITY MANUAL RECORD IPS EVENT RECORD IPS TIMER RECORD IPS TOTAL IPS SHARE ADVANCE Use the following buttons for men
6. 3 e FRI fe HU admin Ree Quality High Online 5 Hod Same as the AP operation Please refer to Section 6 6 Licensed Software Set the display position of the image LT Upper Left LD Lower Left RT Upper Right Lower Right 47 TROUBLESHOOTING Please refer to the FAQ table below for easy troubleshooting The table below describes some typical problems and also their solutions Please check them before calling your DVR dealer PROBLEM _______ No power Check power cord connection Confirm that there is power from the outlet Not working when pressing any button Press any key and then enter the password to exit Key Lock mode Timer record is not working Check if the RECORD ENABLE is set to YES DVR keeps rebooting Make sure the power connector and HDD are connected closely or change another suitable HDD Detect HDD fail Change another HDD for testing Change another HDD cable for testing Make sure HDD Master Slave mode is correctly set Can t detect your USB flash drive Change another USB flash drive to test Can t view the DVR images over the Update the JAVA program network with IE web browser Update the firmware of the software AP Can t play the recorded file on my DVR There must be at least 8192 images of recorded data for playback to work properly If not your DVR will stop the playback For example if
7. 37 MAIL mrt M 37 38 DVR CAMERA SETTING aae cccs cce ccr Lee cco eet eee 39 DEVICE 39 DETECTION I 40 NETWORK BACKUP amp PLAYBACK 41 SEARCH LIST I I I 43 TIMER RECORD e eee nonne nnne nnn nnn nn 2 7 44 DATE uuu u LLTLLTTTTLT 44 RECORD SETTING eee ooo nee ooo n nnn nnn nnn nnnn 44 ALARM p M 45 215 4 7 45 ACCOUNT TL 46 ONLINE USER INFO 46 FILE PATH I 46 5 6 OPERATION VIA IE BROWSER
8. 950 flash drive Support USB 1 1 2 0 Support USB 1 1 2 0 flash drive and Network remote flash drive and network remote backup network remote backup backup HDD Quick Cleaning Support USB 1 1 2 0 flash drive CD R W and network remote backup Backup Device Specification Continued Model 4 Web Transmitting Compression Format Motion JPEG Ethernet 10 100 Base T Support remote control and live view via Ethernet Web Interface Support licensed software AP and IE browser Remote Alarm Notification E mail images and upload images to FTP site s specific account Network Connection Support TCP IP PPPoE DHCP and DDNS functions PTZ control Support PELCO D protocol IR Transmitter N A YES Channel Switch Programmable with adjustable dwell time Alarm I O 4 inputs 1 output Digital Zoom 2X digital zoom live mode Key Lock Yes lt D o Video Loss Detection Camera Title Support up to 6 letters Video Adjustable Hue Color Contrast Brightness Date Display Format YY MM DD DD MM YY MM DD YY and Off Power Source DC 19V Power Consumption 42 W Operating Temperature 10 C 40 50 104 3 5mm W x 61mm H x 281mm D 343mm W x 59mm H x 223mm D 345mm W x 68 3mm H Dimensions mm x 225mm D System Recovery System auto recovery after power reconnected Optional Peripheral VGA converter Q The specifications of the actual products are subject to chang
9. USB ERROR message will be shown on the screen 5 5 LICENSED SOFTWARE AP 1 Install the Software Place the attached CD into one CD ROM drive and install application programs into PC Including AP and JAVA program 2 After setup users will see icon on the desktop ideo Server E NOTE For the latest version of the software AP please refer to your distributor or refer to Section 5 6 OPERATION VIA IE BROWSER 30 2 AP Basic Operation Connect your DVR to PC via RJ45 network line LAN Setting The default DVR IP is 192 168 1 10 and default username and password are both admin Users should set PC s IP address as IP 192 168 1 XXX 1 255 except 10 in order to make the PC and DVR under the same domain Double click to enter the login page Key in IP 192 168 1 10 your username admin password admin and port 80 in the login page After connecting to the DVR with local LAN users could modify the network settings in the DVR or in SYSTEM CONFIG menu of the licensed software AP Network Type Static IP oet the network information in the DVR menu Section 4 12 or in SYSTEM CONFIG menu of the licensed software AP P 35 Network Type Dynamic IP DHCP and PPPoE Set the Network information in SYSTEM CONFIG menu of the licensed software AP For detailed DHCP and PPPoE settings please refer to P 35 and P 36 After setting up
10. please refer to Section 1 5 Rear Panel or refer to Appendix 2 PIN Configuration Control Mode Refer to the front panel description in Section 1 4 FRONT PANEL at P 4 and 5 For detailed PTZ operation please refer to PTZ manuals 22 11ADVANCE MENU SYSTEM Move the cursor to SYSTEM and press ENTER The screen will show the following options 11 SYSTEM SERIAL TYPE RS 485 BAUD RATE 02400 HOST ID 003 PASSWORD SETUP RESET DEFAULT RESET CLEAR HDD MASTER UPGRADE NO For Model 1 2 amp 4 AUTO KEYLOCK NEVER LANGUAGE ENGLISH VERSION 1069 10 J6 04 AA 1 1 VIDEO FORMAT NTSC SERIAL TYPE Press ENTER or or button to set the control serial type RS 485 RS 232 of DVR BAUD RATE Press ENTER or or button to set the BAUD RATE of DVR 2400 9600 19200 5 600 HOST ID Press ENTER or or button to set the ID of DVR 0 255 PASSWORD Press ENTER to set the password for accessing DVR admin password or guest password Users who use guest password to access the DVR will only allow to view the live streaming video and sequence display shift the channel display and lock keys RESET DEFAULT Press ENTER to reset all settings as default and select YES to confirm or NO to cancel CLEAR HDD Press ENTER and select YES to confirm to clear HDD or to cancel UPGRADE This function is only for Model 1
11. 2 and 4 Press ENTER and select YES to confirm upgrade or to cancel Model 3 only supports upgrade from AP remote side Please refer to P 31 AUTO KEYLOCK Set the time out after which the key lock function is activated Never 10 secs 30 secs 60 secs LANGUAGE Only Model 1 2 and 4 support multi language Press ENTER or to select the language for the OSD VERSION The firmware version information VIDEO FORMAT The information of the DVR s video format 23 12 ADVANCE MENU NETWORK Move the cursor to NETWORK and press ENTER The screen will show the following options NOTE NETWORK NETWORK TYPE DNS PORT NETWORK TYPE STATIC select NETWORK TYPE press or button to set the network type as STATIC and then press ENTER to go to the submenu of the network In the submenu of network type use or button to set all the information needed in the DVR See the illustration below STATIC IP GATEWAY NETMASK NETWORK TYPE DHCP The DHCP function needs to be supported by a router or a cable modem network with DHCP services For detailed DHCP settings please follow the AP Licensed software AP setup and then refer to P36 and P37 NETWORK TYPE PPPoE This PPPoE function needs to have one username and one password subscribed from one ISP supplier For detailed PPPoE settings please follow the AP Licensed
12. Enter the password to exit Key Lock mode 3 Password For the password setting please refer 4 PASSWORD in Section 4 11 ADVANCE MENU SYSTEM at P 23 5 3 SWITCH THE N P SYSTEM 1 Press 1 or Power button on the DVR front panel to shutdown Then press and hold first and press 1 Power to switch to PAL system Press the buttons until the monitor shows video images 2 Press I or Power button on the DVR front panel to shutdown Then press and hold lt first and press b or Power to switch to NTSC system Press the buttons until the monitor shows video images 29 5 4 USB UPGRADE This USB upgrade function is only for Model 1 2 amp 4 Model 3 only supports upgrade from AP side Please refer to P 31 Users can use USB to upgrade Please format the USB memory device as FAT 32 format first 1 Get the upgrade files from your distributor 2 Save the upgrade files in your USB device Do not change the file name 3 Goto MAIN MENU SYSTEM UPGRADE and press ENTER 4 Select YES and press ENTER again to confirm upgrade UPGRADE PLEASE WAIT PLEASE WAIT ARE YOU SURE UPGRADE KERNEL UPGRADE BOOT PLEASE WAIT UPGRADE SUCCESS SHUTDOWN UPGRADE HTML REBOOT PLEASE WAIT OK OK OK NOTE D Please use PC to format the USB flash drive as FAT 32 Ifthe USB flash drive can t be detected by the DVR the
13. Section 1 5 Rear Panel for connection and Appendix 2 for pin configurations of the external I O port NOTE Be sure the cameras are connected and power supplied before the DVR is powered on Otherwise the DVR will not be able to detect N P system automatically 3 Connect the AC power cord to power adapter and plug into an electrical outlet The l or Power LED will be on as red Press the ly or Power button The Cl or Power LED will be on as green It takes approximately 10 to 15 seconds to boot the system 4 set the date and time on your DVR Please DO NOT change the date or time on your DVR after the recording function is activated The recorded data will be disordered and you will not be able to find the recorded file to backup by time search NOTE If users change the date or time accidentally when the recording function is activated it s recommended to clear all HDD data and start recording again For the connection application please see the illustration below for an example Take Model 1 as an example Camera 1 Camera 4 USB KM OK MON ON i 3 Main Monitor Call Monitor Speaker Drive 7 A TN f INPUT MONITOR CALL J N 2 AN JOB wc Ss OS X NI 2 N 4 coconoooo 5 LINK U Lo ACT EXI ERNAL I O 4 gi DE Audio in Adapter
14. ac e NN P a 09000 7 X m NN M m VE O H oy LINK SOc 7 M e D V EXTERNAL LAN pc 8 SEA Q 9 0 dU 1 750 HI IMPEDANCE When using Loop function please switch to HI IMPEDANCE When you don t use Loop function please switch to 750 2 VIDEO INPUT CHANNEL 1 4 Connect to video sources such as cameras LOOP CHANNEL 1 4 Video output 3 MONITOR Connect to Main monitor 4 CALL MONITOR Connect to CALL monitor Show the channel switch display When the alarm is triggered the call monitor will show the image of the triggered channel for a period of time 5 AUDIO IN 2 audio in Connect to audio sources such as cameras equipped with the audio function When users start the recording function the audio input will be recorded 6 AUDIO OUT Connect to a monitor or speaker With 1 mono audio output from the same source 7 D V PORT Digital Video Port Connect to a VGA converter 8 EXTERNAL PORT Insert the supplied 15PIN DSUB to this port for connecting external devices alarm input external alarm PTZ camera For detailed port PIN configuration please refer to Appendix 2 9 LAN Connect to Internet by LAN cable 10 LINK ACT LED light When the Internet is activated the LED light will be on 11 POWER Connect to the
15. lt gt lt gt lt gt lt gt lt gt lt gt Best Normal Basic O ow N D APPENDIX 5 APPENDIX 5 COMPATIBLE USB FLASH DRIVE BRAND Please upgrade the firmware of the DVR to the latest version to ensure the accuracy of the following table If the USB flash drive is not supported by the DVR the USB ERROR message will be shown on the screen NOTE Please use PC to format the USB flash drive as FAT 32 Manufacturer Mode capacity _ cwbweuss MB Pa cwpweumo 99 APPENDIX 6 APPENDIX 6 COMPATIBLE HDD BRAND Please upgrade the firmware of the DVR to the latest version to ensure the accuracy of the following table munem m HITACH DeskstarHDS728080PLAT20 DiamondMax 536DX 60GB 4W060H4 06
16. 12 TIMER RECORD IPS Recording is activated by timer schedules Select the images per second for TIMER RECORD The options are as following NTSC FRAME 30 15 7 3 PAL FRAME 25 12 6 3 CIF 120 60 30 15 CIF 100 50 25 12 TOTAL IPS SHARE There are two IPS settings FIX IPS per channel RECORD IPS 4 channels GROUP Suitable for Frame mode IPS per channel RECORD IPS number of channels under recording NOTE For Model 3 amp 4 the total IPS share is always FIX MAIN MENU OPTIONS TIMER MENU RECORD TIMER DATE ADVANCE Move the cursor to TIMER and press ENTER The screen will show the following options RECORD SIART 1 DATE Select scheduled record days SUN MON TUE WED THU FRI SAT MON FRI SAT SUN DAILY OFF to set up timer record schedules NOTE 1 Specific days could be changed by or button NOTE 2 If you plan to set the timer recording across the midnight there two ways for setting the timer recording schedule Please follow the instructions below Example 1 If you only want to set the recording timer schedule from every Sunday 23 30 to Monday 23 30 then you could set the recording timer schedule as Sunday from 23 30 to 23 30 Example 2 If you plan to set the timer recording from Sunday 08 00 to Monday 15 00 then you could set the recording timer schedule as Sunday from 08 00 to 24 00 and Monday 24 00 to 15 00 Note Please
17. 4 Connect to video sources such as cameras LOOP CHANNEL 1 4 Video output 3 MONITOR Connect to Main monitor 4 CALL MONITOR Connect to CALL monitor Show the channel switch display When the alarm is triggered the call monitor will show the image of the triggered channel for a period of time 5 AUDIO IN 1 audio in Connect to audio sources such as cameras equipped with the audio function When users start the recording function the audio input will be recorded 6 AUDIO OUT Connect to a monitor or speaker With 1 mono audio output from the same source T D V PORT Digital Video Port Connect to a VGA converter 8 EXTERNAL PORT Insert the supplied 15PIN DSUB to this port for connecting external devices alarm input external alarm PTZ camera For detailed port PIN configuration please refer to Appendix 2 9 LAN Connect to Internet by LAN cable 10 LINK ACT LED light When the Internet is activated the LED light will be on 11 POWER Connect to the supplied adapter FAN 6 REAR PANEL continued Model 4 e iB LOOP INPUT Loop INPUT INPUT LO INPUT MONITOR CALL IN OUT AUDIO 9t ry ous O 0 00 17 1 750 HI IMPEDANCE When using Loop function please switch to HI IMPEDANCE When you don t use Loop function please switch to 750 2 VIDEO INPUT CHANNEL 1 4 Connect to video sourc
18. ALL 2006 07 17 11 00 00 SYSTEM ALL 2006 07 17 10 19 44 SYSTEM ALL 2006 07 17 10 00 00 gt b system setting Network DVR Timer Record DATE START END 1 SUN 08 06 17 06 2 17 06 17 06 3 OFF 17 06 17 06 4 OFF 00 06 00 66 5 OFF 00 00 00 00 ao 6 OFF 00 00 00 00 General 7 OFF 00 00 00 00 Account Onlme User Info File Path 7 Press APPLY if the settings are correct press EXIT to quit without saving 43 Date In this menu you can set the date for your DVR Please DO NOT change the date or time when the recording function is activated See 2 1 GETTING STARTED at P 10 for details DATE Choose the current date from DATE drop down menu and enter the current time When you click the drop down menu a calendar as shown below shows for you to set the current date FORMAT 2006 July 18 gt 14 26 26 zd FORMAT v M D DAYLIGHT SAVING CON 2ND SUN 00 00 2ND SUN oo 00 ADJUST 01 00 DATE Network Backup Search List Timer Record START Record Setting END Alarm General Choose format for date display from three options Y M D D M Y and M D Y DAYLIGHT SAVING Specify whether to use daylight saving time ON O
19. Max 5 Lo RICH USERS accounts password life time and wisi authority level 5 users on line at the same time a User s level _ General SUPERVISOR mm Control all the functions File Path b e and Mn Control only b and System setting functions but cannot P function NORMAL um HIGH USER INFINITY Control only d and e functions A but cannot control b and f functions o GUEST _ Raro Seting Usemame normal _ Watch the image only Only function EM s can be used Onin Uer Life time According to different authority levels different accounts can stay online for different time periods 1 Min 5 Min 10 Min 1 Hour 1 Day INFINITY Online User Info Get all the current online users information list Name IP Address Authority Level Resolution and Image Quality File Path Snapshot Path Assign the route for saving the snapshot picture Record Path Assign the route for saving the manually recorded file APPLY Online User Info Online user information pr Network Backup Search List Timer Record Snapshot Path Modify CADocuments and Settmgs Rickyl Desktop Network Backup Record E CADocuments and Settings Rickyl De
20. Select Select MAIN when the video output device is CRT monitor Select VGA when the video output device is LCD monitor Note If the connected video output device is LCD monitor but the setting here is MAIN motion detection area setting will be disabled OSD Set the customized OSD oolor WATERMARK In the playback mode of the software AP users could proof the authenticity of the BACKUP VIDEO If the BACKUP VIDEO had been modified the video image will turn to light red and the playback will be paused Please refer to P 35 for detailed instructions Note This function is always on and non switchable 20 Move the cursor to ALERT and press ENTER The screen will show the following options 10 EXT ALERT INT BUZZER KEY BUZZER VLOSS BUZZER MOTION BUZZER ALARM BUZZER HDD BUZZER HDD NEARLY FULL GB ALARM DURATION SEC PRE ALARM EXT ALERT set the sound on off when the external alarm is triggered INT BUZZER the sound of KEY VLOSS MOTION ALARM HDD FULL on or off KEY BUZZER oet the sound on off when pressing the button VLOSS BUZZER Set the sound on off when any video loss happened MOTION BUZZER set the sound on off when the motion alarm is triggered ALARM BUZZER oet the sound on off when the internal alarm is triggered HDD BUZZER Set the sound on off when the HDD is full HDD NEARLYFULL GB If HDD buzzer is on you could choose to have a bu
21. TTMM 22 4 11 ADVANCE MENU SYSTEM TTLL 23 4 12 ADVANCE MENU NETWORK LLMMM 24 4 13 ADVANCE MENU BACKUP LLMMee ye y 25 4 14 ADVANCE MENU HDD INFO 27 4 15 ADVANCE MENU EVENT LOG 27 ADDITIONAL OPERATION 5 1 SEARCH rrr 28 5 2 KEY LOCK 29 5 3 SWITCH THE N P SYSTEM I I I 29 5 4 USB UPGRADE 30 5 5 LICENSED SOFTWARE AP I I 30 INSTALL THE SOFTWARE AP 30 AP BASIC OPERATION I 31 AP ADVANCED SETTING I 36 Network 36 sc c
22. can record more than 5 days 4CH Frame Best Quality 30IPS Backup Function For model 1 support CD R W USB flash drives and network remote recording amp backup For model 2 and 4 support image backup with USB flash drives and net work remote recording amp backup For model 3 support network remote recording amp backup Remote Surveillance Support remote surveillance with licensed software AP and IE browser Web surveillance up to 5 users simultaneously Intelligent Motion Trigger Recording With advanced motion detection function scheduled motion detection recording 4 different adjustable factors for motion detection sensitivity and convenient search function customized security environments are achieved Alarm trigger recording will send alerts with images to designated e mails and the FTP address Support pre alarm recording 8MB Covert Recording Amask replaces the live image with a blank screen amp the monitor shows nothing but recording is still on Support Support 2 audio in 1 audio out to record sounds Model 1 and Model 2 Support 1 audio in 1 audio out to record sounds Model 3 and Model 4 Support VGA output to monitor optional General Model 1 2 and 4 support multi language OSD System auto recovery after power reconnected Support daylight saving function Support manual timer motion alarm network remote recording functions Watermark function ensures authentication o
23. choose the 4 icon will be shown on the motion area to be detected The screen And the software AP will under detected area is transparent start recording automatically while the undetected area is in pink color Click Select to activate the detection area as the full area Click Clear to clean the previously selected detection area After setting press OK and then press APPLY to confirm 40 Network Backup You can backup the recorded data from the DVR directly to your PC and CD via the network The backup file can be played directly in your PC via the supplied licensed AP or via other media players Ex Windows Media Player or RealPlayer after the file is converted to AVI format NOTE For CD backup please install NERO CD burning program to your PC first 1 Enter the backup information If you want to make a backup to a CD Start Backup Time T gt 44 please check Copy to opes Detection Backup Information If you want to view the backup image while Backup Sie U the backup is processing please check A Channel I Dynamic Download Dynamic Download Praia HDDNwn MASTER z jm File Path 00064 1 2 Press Start button to proceed the backup process DVR Network Backup Making backup to your PC After pressing Start
24. the IPS is set to 30 the recording time should be at least 273 seconds 8192 images 30 IPS for the playback to work properly Error Code in SYSTEM LOG Meaning 1 SYS ERR 01 YYY define SYS ERR AV087 ERR 1 Compression error YYY 000 Audio chip error YYY 001 AVO87 Chip for CH1 4 error 002 AV087 Chip for CH5 8 error YYY 004 087 Chip for CH9 12 error YYY 008 AV087 Chip for CH13 16 error YYY 003 001 002 Chips for CH1 4 amp CH5 8 error etc 2 SYS ERR 02 XXX define SYS ERR AV087 BUF FULL Buffer is full 3 SYS ERR 03 XXX define SYS ERR AV087 BUF Buffer is empty 4 SYS ERR 04 XXX define SYS ERR IDE ERR IDE interface error 5 6 7 SYS ERR 05 XXX define SYS ERR SCAN DISK Disk scanning error SYS ERR 06 XXX define SYS ERR TOP FAT ERR File system error SYS ERR 07 including 08 09 etc XXX define HDD error APPENDIX 1 APPENDIX 1 INSTALL HDD Carefully follow the steps to ensure correct installation Model 1 Note Please set the HDD to Master Mode or Single Mode 1 Open the upper cover of the DVR Loosen the two screws respectively on the two sides of the upper cover Loosen the four screws on the back side of the upper cover Screw out the HDD bracket For the positions of the HDD bracket screws please refer to the right figure Screw HDD onto the HDD bracket two screws for each side There are three screw holes per side on the bracket and you can ch
25. the magnetic contact is opened the alarm will be triggered and the recording is on At the same time COM connects with NO and the siren with strobe starts wailing and flashing Solder Side E of DSUB ACT20V 12V 500mA NOTE Please go to MENU gt ADVANCE gt DETECTION DETECTION SETUP and set ALARM to LOW on the local machine DC12V GND PIN Connection Application 51 APPENDIX 3 APPENDIX 3 RS 232 PROTOCOL 1 Use PC keyboards to simulate DVR keypads 2 Data REMOTE PROTOCOL use 8 bit data 1 start bit 1 stop bit Function As escort eso x wmer dR ____ 2 _ rene domed reve see 52 APPENDIX 4 APPENDIX 4 RECORDING TIME TABLE Q For Model 1 and 2 1 Recording time varies depending on the following factors Different camera quality Different picture composition such as frequency of the object movement Record day time hour T Record mode Quality Frame Best Normal Basic 3 lt gt lt gt lt gt lt gt lt gt lt gt CIF Best Normal Basic C1 OO Q For Model 3 and 4 1 Recording time varies depending on the following factors Different camera quality Different picture composition such as frequency of the object movement Record day time hour T Quality Frame Best Normal Basic 3
26. 205 User s Manual Please read instructions thoroughly before operation and retain it for future reference The image shown above may differ from the actual product appearance ENGLISH 782 781 760 761 502 501 560 561 V1 0 IPORTANT SAFEGUARD CAUTION RISK OF ELECTRIC SHOCK CAUTION To reduce the risk of electric shock do not expose this apparatus to rain or moisture Only operate this apparatus from the type of power source indicated on the label The company shall not be liable for any damages arising out of any improper use even if we have been advised of the possibility of such damages The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance CE Mark This apparatus is manufactured to comply with the radio interference requirements The company does not warrant that this manual will be uninterrupted or error free We reserve the right to revise or remove any content in this manual at any time THIS PRODUCT IS LICENSED UNDER THE MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR TH
27. 8400 57600 115200 After setting press OK and then press APPLY to confirm 39 Detection Select the desired channel and press Edit to enter the motion detection sensitivity and area setting box im Motion Detection Sensitivity SearhList Set the detection sensitivity in 4 D different adjustable factors LS The sensitivity of comparing two different images The smaller the value the higher sensitivity for the motion detection SS The sensitivity towards the z size of the triggered object on the NO DETECT AREA 18 SS TS RE ALARM screen the number of motion o s 2 Mii detection grids The smaller the E E ME LS value the higher sensitivity for the motion detection TS The sensitivity towards how long the object stays in the detection area to get triggered The smaller the value the higher sensitivity for the motion detection RE The value of RE is a reference for the detection The bigger the value the higher sensitivity for the motion detection f amp WEB SERVER Alarm Select LOW HIGH for the alarm polarity I 5 2 S Ww bo bo bo bo bo bo bo Lo Lo 3 b Date Record Setting larm Motion Detection Area Note Enable the motion detection function By clicking the area with your When the motion is triggered mouse one can
28. CKUP HDD INFO EVENT LOG Move the cursor to CAMERA and press ENTER The screen will show the following options CAMERA 1 TITLE Move the cursor to the camera title you want to change and press ENTER to access the setting screen Assign each channel a title up to six characters letters or symbols The default title is the channel number 2 BRIG CONT SATU HUE Adjust the Brightness Contrast Saturation Hue of each channel The level is from to 255 The default value of BRIG is 110 Others are 128 3 COVERT select YES to mask the selected channel which is under recording When this function is activated the COV word will be shown on the screen 4 REC RECORD Select YES to enable the record function Select NO to disable recording at all time 5 PREV NEXT Select PREV to go to the previous page Select NEXT to go the next page 17 4 7 ADVANCE MENU _ DETECTION Move the cursor to DETECTION and press ENTER The screen will show the following DETECTION options DETECTION SETUP DETECTION TIMER 1 DETECTION SETUP DETECTION 55 03 03 03 03 a TITLE Show the camera title of each channel b DET Select to activate the motion detection function of the selected channel Select OFF to inactivate the motion detect function of the selected channel c AREA Press the ENTER button to set the
29. D Display the OSD of the AP playback window AVI conversion Convert the entire recorded file to the AVI format Config Setting Enter the AP config setting box and set the file path text color and text color of progress status Mute Play back the video only without audio AV Sync Play back with the audio and video synchronously Watermark Proof the authenticity of the backup video Open Previous File Open the previous backup video Open Next File Open the next backup video Note When users pause the playback picture press D Playback Control Buttons button to go to the previous frame or press Play Stop Pause Fast Rewind button to go to next frame Fast Forward In the playback mode of the software AP users could press button to check the authenticity of the Snapsnot BACKUP VIDEO If the BACKUP VIDEO had been Press this button to take a snapshot of the current image which will be saved in the designated destination altered the video image will turn to light red and the playback will be paused Note F Close the Player When users use remote AP recording the watermark function is not supported 35 3 AP Advanced Setting FR 234fps 314 kbps HU admin L Press System Config lt button to enter the system setting page Network The network configuration allows the DVR to connect to an Ethernet dai Network
30. E PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR i ENCODING VIDEO IN COMPLIANCE WITH THE MPEG 4 VISUAL STANDARD MPEG 4 VIDEO AND OR ii DECODING MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON COMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG 4 VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA LLC SEE HTTPZ ANWW MPEGLA COM Note Firmware Version 1069 10 J6 04 AA 1 1 AP Version 1049 Note For any changes of AP please refer to your distributor Note Any changes of this manual are subject to the actual product without further notification PARTS AND FEATURES 1 1 FEATURES L T 1 1 2 PACKAGE CONTENTS IT M 1 1 3 SPECIFICATION 2 1 4 FRONT PANEL I T T 4 1 5 REAR PANEL Model 1 rrr er LLL 6 1 5 REAR PANEL Model 2
31. FF and time period START END and adjust the daylight saving time in hour ADJUST Record Setting In this menu you can set DVR record settings MANUAL RECORD Specify whether to use manual recording YES ON and set IPS number EVENT RECORD Specify whether to user event recording YES ON and set IPS number RECORD opecify whether to use timer recording YES ON and set IPS number OVER WRITE Specify whether to overwrite the HDD capacity when the HDD is full YES NO RECORD IMG SIZE Choose FRAME or CIF This selection will affect the available IPS options in the 3 recording modes described above System setting Network DDNS Mail MANUAL RECORD FTP C YES CNO IPS 120 EVENT RECORD YES NO IS 120 TIMER RECORD search List Timer Record YES C NO IPS 120 T Date OVER WRITE noci IMG SIZE Record settme v VES C NO CIF ia vel RECORD T IPS Account BEST v GROUP APPLY RECORD QUALITY 4 options are available from the drop down menu BEST HIGH NORMAL and BASIC TOTAL IPS SHARE Choose the IPS share as FIX or GROUP NOTE For Model 3 amp 4 the total IPS share is always FIX Selecting GROUP here is useless 44 Alarm System setting E N rk Alarm Alarm Trigger Enable Disable Alarm Trigger SDR Alarm Met
32. NISH will prompt on the screen Press to take out the CD from CD Writer Put CD into the CD ROM drive of PC O S system Windows XP and Windows2000 And then double click the file gt Convert the file Play the backup file at PC Side The maximum number of backup files in the CD is 41 The backup file can be played directly in your PC via the supplied licensed AP or via other media players Ex Windows Media Player or RealPlayer after the file is converted to AVI format 26 14 ADVANCE MENU HDD INFO You can get the capacity information for the connected HDD HDD NUM MASTER 1 MASTER 2 EXTOO1 EXT003 5 EXTOO 7 9 EXTO11 HDD SIZE 400 000 NO HDD NO HDD NO HDD NO HDD NO HDD NO HDD NO HDD HDD SIZE NO HDD NO HDD NO HDD NO HDD NO HDD NO HDD NO HDD NO HDD You can get all the information event type time and channel on the event list including video loss list net list and other lists such as power on off key unlock reset to default Select the event list you want to see and press ENTER VLOSS LIST Show the information of the video loss time NET LIST Show the information of the net login time SYSTEM LOG Show the error code for system errors For the meaning of each error code please see 6 1 FAQ at P 48 OTHERS Show the information of power on off unlock and reset to default time CLEAR ALL Clear all event lo
33. Software AP setup and then refer to P36 and P37 DHCP and PPPoE network types need to apply DDNS services to get Hostname to correspond to the dynamic IP address For detailed DDNS settings please refer to 24 13 ADVANCE MENU __ BACKUP This USB backup function is only for Model 1 2 amp 4 Move the cursor to BACKUP and press ENTER The screen will show the following options BACKUP USB BACKUP select USB BACKUP and then press Enter USB BACKUP START TIME 2006 MAY 12 16 30 00 END TIME 2006 MAY 12 16 40 00 AVAILABLE SIZE 0512 MB CHANNEL e 01 X 02 X 03 X 04 HDD NUM MASTER BACKUP TO USB START START TIME Select the start time of the backup END TIME Select the end time of the backup AVAILABLE SIZE Display the available capacity in the inserted USB flash drive CHANNEL select channels by pressing ENTER button to change the symbol in front of the channel number oymbol X means that this channel is not selected to backup Symbol means that this channel is selected to backup HDD NUM Show the current HDD as Master HDD BACKUP TO USB Press ENTER to start copying the chosen file to the USB flash drive Audio Backup For audio 1 backup please choose CH1 For audio 2 backup please choose CH2 Please use PC to format the USB flash drive as FAT 32 If the USB flash drive is not supported by the DVR the USB ERROR message will be shown o
34. destination you set in SYSTEM CONFIG File Path Snapshot Path 32 RB pee x dg Record press this button to start recording and press this button again to stop recording The recorded files will be saved to the designated path on the PC Each recorded file can be up to 18 000 frames When the recorded file is full the new recorded file will be saved as the second file If the HDD space is less than 200MB the program will stop recording oystem Config press this button to enter the setting page of the software AP Number of Online Users CH1 4 4 Channel Display Record search Stop Fast Rewind Fast Forward Pause Slow Playback Play for changing system settings and switching channels for changing system settings and switching channels Digital Zoom digital Zoom in out Set Press this button to change the position of the channel display Press AW 4 P gt to select the channel that you would like to change Press or to select the channel that you would like to show Press Enter button to confirm the setting Sequence Press this button to enter the call monitor function and press again to exit from the call monitor mode When any motion is detected the monitor will switch to the channel which is motion triggered Enter for confirming the system settings or entering your selection PTZ Control On Off When the PTZ control is turned on users could select the PTZ dev
35. detection area Pink blocks represent the area that is not being detected while the transparent blocks are the areas under detection Press ENTER to confirm the Press 4 or gt to choose the Press lt or gt to choose the start area width of the area height of the area and press ENTER again to confirm LI E D D li E m YY OO OO E EE ES E a Multi detection areas Press to set the whole Press to set the whole area under detection undetected 18 AV lt P Navigate between targets d LS The sensitivity of comparing two different images The smaller the value is the higher sensitivity for motion detection The highest sensitivity setting is OO and the lowest sensitivity setting is 15 The default value is 07 55 The sensitivity regarding the size of the triggered object on the screen the number of motion detection grids The smaller the value the higher sensitivity for motion detection The highest sensitivity setting is 00 and the lowest sensitivity setting is 15 The default setting is 03 Note The default setting of Spatial Sensitivity is 03 which means once a object is detected more than 3 grids the system will get triggered So the value of Spatial Sensitivity must be less than the number of grids that you set up for the motion detection area TS The sensitivity regarding how long the object gets triggered The smaller the value the higher motion detect
36. e of the button up down left right one mouse click will function as clicking 3 times 34 Playback Operation One click to activate AP Playback Window AP Config SS Box ve ms Bytes Resolution 720x 480 Date 2005 07 17 15 57 54 ion 1 0 5 2 U e xs eee 4 M ER ER ee eS llli GN RN RN TIN EN AE 15 68 05 _ 720 x 480 00 01 01 Y LM 179 E ISBEERRRERRRRR PTT Lk X 1 e dh d i ji m im m dm e m RA Hm jm nm Gm m m Um A Playback Information Display information such as Date Time Resolution Rewind Forward Speed Status and Functions etc B Time Progress Bar Show the playback progress status Clear all To snap a video clip right click the mouse to make a starting point red and click one more time to make a ending point Then right click to convert to the AVI format C Functions De interlace Reduce the vibration of the paused picture De blocking Reduce the video mosaic phenomenon OS
37. e without further notification FRONT PANEL LED LIGHT HDD HDD is reading or recording HDD Full HDD is full ALARM Once the alarm is triggered TIMER When timer recording is turned on PLAY Under playing status REC Under recording status Press MENU button to enter the main menu ENTER SET Press ENTER button to confirm the setting Press SET to change the position of the channel display Press A V 4 to select the channel which you would like to change Press or to select the channel which You would like to show SEARCH Press SEARCH button to enter the search menu SLOW Under the playback mode press SLOW button to show slow playback ZOOM Press ZOOM button to enlarge the picture of selected channel under the live mode TE Dur Press FH button to show the 4 channel display mode Press button to change the setting the menu SEQ 1 7J Press SEQ button to activate the call monitor function and press SEQ button again to escape the call monitor mode Press 4 button to change the setting in the menu 1 or Power Press this button to turn on off the DVR Under the recording mode please stop recording before turning off the DVR 10 11 12 13 14 15 16 17 18 19 CH1 7 CH2 7 CH3 7
38. es such as cameras LOOP CHANNEL 1 4 Video output 3 MONITOR Connect to Main monitor 4 CALL MONITOR Connect to CALL monitor Show the channel switch display When the alarm is triggered the call monitor will show the image of the triggered channel for a period of time 5 AUDIO IN 1 audio in Connect to audio sources such as cameras equipped with the audio function When users start the recording function the audio input will be recorded 6 AUDIO OUT Connect to a monitor or speaker With 1 mono audio output from the same source 7 D V PORT Digital Video Port Connect to a VGA converter 8 EXTERNAL I O PORT Insert the supplied 15PIN DSUB to this port for connecting external devices alarm input external alarm PTZ camera For detailed I O port PIN configuration please refer to Appendix 2 9 LAN Connect to Internet by LAN cable 10 LINK ACT LED light When the Internet is activated the LED light will be on 11 POWER Connect to the supplied adapter 12 USB Support USB flash drive firmware update and file backup 13 IR PORT Connect the IR receiver for remote control 9 GETTING STARTED 2 1 GETTING STARTED Connect all the devices to construct a surveillance system 1 Install HDD The HDD must be installed before the DVR is turned on Please refer to Appendix 1 for HDD installation instructions 2 Connect cameras monitors and external devices Please refer to
39. f recorded images Support TCP IP PPPoE DHCP and DDNS network connection 2 PACKAGE CONTENTS Digital Video Recorder Licensed Software AP V External I O Port Pin Connector Power and Data Bus IR Receiver amp Transmitter Manual amp Quick Start V Model 4 LY NN Y NOTE Please check the package contents to make sure that you receive all accessories shown above 1 1 3 SPECIFICATION Video System NTSC PAL switchable LEE Frame MPEG 4 CIF MPEG4 Frame MJPEG CIF MPEG4 Video Input 4 Channels Composite video signal 1 Vp p 750 BNC Video Loop Out 4 Channels Composite video signal 1 Vp p 750 BNC Main Monitor Output Composite video signal 1 Vp p 759 BNC Video Output A Call Monitor Output Composite video signal 1 Vp p 750 BNC Maximum Recording Rate Frame 720 x 480 pixels with 30 IPS NTSC 720 x 576 pixels with 25 IPS PAL CIF 352x240 pixels with 120 IPS NTSC 352 x 288 pixels with 100 IPS Adjustable Recording Frame 30 15 7 IPS lt NTSC gt 25 12 6 3 IPS PAL Speed CIF 120 60 30 15 IPS lt NTSC gt 100 50 25 12 IPS PAL Image Quality Setting Best High Normal and Basic Hard Disk Storage IDE type ATA66 supported HDD 1 support HDD capacity over 400GB Quick clean up the index system of the recorded files 250GB under 2 seconds Pre alarm Recording Yes 8MB USB Interface Support USB 1 1 2 0 flash drive N A
40. g lists 27 ADDI TIONAL OPERATION SEARCH Press SEARCH button on the front panel of the DVR to enter the search mode Then the screen will show the following options SEARCH HDD MASTER 1 SEARCH 1 HDD HDD Master 1 2 FULL LIST Show the time list for all types of the recorded files The capital letters stand for the following R RECORD S SYSTEM A ALARM MS MOTION T TIMER 3 RECORD LIST List the time of manual recorded files 4 SYSTEM LIST List the time of system recorded files Under the manual recording mode the DVR system will save one recorded file every one hour 5 ALARM LIST List the time of alarm trigger recorded files 6 MOTION LIST List the time of motion trigger recorded files 7 EVENT SEARCH Search the recorded files by the specific time period YEAR MONTH DAY HOUR MIN channel HDD and event type motion alarm triggered recording When you playback the recorded videos they will be played with the fast speed 8 TIME SEARCH Search the recorded files by the specific time period YEAR MONTH DAY HOUR MIN NOTE Move the cursor to the specific recorded file and press ENTER to play the video Press stop button to return to the live display 28 KEY LOCK 1 Key Lock On Press MENU ENTER buttons on the DVR front panel to lock keys Auto key lock refer to Section 4 11 ADVANCE MENU SYSTEM 2 Key Lock Off
41. hod Email FIP Enable or disable Email and FTP Denon Penes notification function Search List Alarm Duration SEC s Timer Record Da 2 Method ER Two notification methods Refiech Email and FTP EE ERE File Path Post Numbers Set MJPEG pictures 1 10 pictures 4 Alarm Duration Note Set the duration time of motion trigger recording 5 SEC 10 SEC 20 SEC 40 SEC Alarm Refresh Clean the alarm message which is shown on the screen Email Notification MJPEG pictures will be made at your designated space set in File Path plus an e mail contained with the MJPEG pictures 1 10 pictures to be sent to the address which is set under Mail FTP Notification MJPEG pictures will be made at your designated space set in File Path plus a FTP file contained with the MJPEG pictures 1 10 pictures to be sent to the address which is set under FTP General eS EST Get the information of DVR firmware Firmware Version 1066 version in this window 5 x Select Turbo Step 1 10 Backup address 00 00 00 00 00 00 To speed up menu selection or the iiie control of the PTZ camera under video __Serverleg MAKLOOLIST prc Web servers users can activate Turbo Tite DOR function by clicking this button Users are allowed to change the turbo steps from 1 to 10 Ex If the val
42. ice and press OK button to enter the PTZ control AP screen Press ESC to exit from the PTZ control AP screen and return to the DVR control AP screen Menu Up Down Left Right Turbo ON OFF speed up menu selection or the control of the PTZ camera under software AP users could activate Turbo function by clicking this button Users are allowed to change the turbo steps from 1 to 10 Ex If users activate the TURBO function and set the value of the turbo step as 3 then when users press one of the button up down left right one mouse click will function as clicking 3 times 33 Digital Device Control Panel PTZ P Weo SERVER FR 2 34 fps DR 314 Kops HU admin 16 30 16 Preset 1 16 AUTO Zoom Tele Zoom Wide Focus Near Focus Far Max Zoom 8 Max Zoom Out Enter PTZ Control On Off When the PTZ control mode is turned on users could select the PTZ device and press OK button to enter the PTZ control AP screen Press ESC to exit from the PTZ control AP screen and return to the DVR control AP screen Menu Up Down Left Right Turbo To speed up menu selection or the control of the PTZ camera under the software AP users could activate Turbo function by clicking this button Users are allowed to change the turbo steps from 1 to 10 Ex If users activate the TURBO function and set the value of the turbo step as 3 then when users press on
43. ion sensitivity will be The highest sensitivity setting is OO and the lowest sensitivity setting is 15 The default setting is 02 RE The value of RE is a reference for detection The default value is 10 which means DVR will compare 10 continuous images at one time according to the sensitivity of LS SS TS simultaneously The bigger the value the higher sensitivity for motion detection The highest sensitivity is 61 ALARM Select LOW HIGH for the alarm polarity The default alarm value is OFF DETECTION TIMER Set the date start time and end time for the detection function DETECTION TIMER START Move the cursor to DISPLAY and press ENTER The screen will show the following options TITLE DISPLAY DATE DISPLAY HDD INFO LOSS SCREEN PLAYBACK INFO NORMAL DWELL DURATION SEC 2 DE INTERLACE ON MONITOR OUT MAIN OSD SETUP WATERMARK ON TITLE DISPLAY Turn the channel title display on off DATE DISPLAY Turn the date display on off HDD INFO Turn the information display of internal HDD on off LOSS SCREEN oet the color of the video loss screen Blue or Black PLAYBACK INFO Set the position where playback information will be indicated center or normal on the button of the left hand side of the screen DWELL DURATION SEC oet the duration time of each channel for CALL MONITOR 2 4 8 16 secs DE INTERLACE Set the DE INTERLACE function on off MONITOR OUT
44. iy D After setting press APPLY to confirm 38 DVR Camera Setting Each camera channel can be adjusted independently Q Select the desired camera channel HO nne LER CT AT REC Press Edit to enter the setting box Title ur E Enter the camera channel name up to De 6 characters 0 General 4 Adjustment goo WM Adjust the BR brightness CT MTM contrast SU saturation HU hue REC recording of the camera Edit After setting press OK and then NO DEVICE 0 PROTOCOL RATE press APPLY to confirm 7 pz sj s 2400 s Device Select the desired channel of the installed external device 7 ME Press Edit to enter the setting box ETP ro mee e BORN DeviceT EL DVR 2 CAMERA 0 NORMAL 2400 Device Type NEN EA Choose either general camera or Seah List 5 O OMUL 2 PTZ camera n LO e Record Setting 9 CAMERA 0 NORMAL 2400 gt 0 255 ofthe 1 2 er Account 1 CAMFRA n NORMAT 2 installed external PTZ device Rh Protocol Type Choose NORMAL protocol for our vn ane NO DEVICE ID PROTOCOL RATE Choose P D protocol for PELCO D buius edis 1 0 Norma 2400 Baud Rate Set the baud rate of each channel 2400 4800 9600 19200 3
45. j CHA 7 Press 1 2 3 4 buttons to select the channel to display Press REC button to activate the manual recording gt or PLAY Press this button to playback the recorded data UP PAUSE DOWN STOP LEFT FAST REWIND RIGHT FAST FORWARD Press A W M move the cursor up down left right Under the playback mode press button to pause playback Under the playback mode press lll button to stop playback Under the playback mode press gt gt button to fast rewind Under the playback mode press lt 4 button to fast forward SLOW ZOOM L AUDIO L AUDIO Press these two buttons to select live or playback sounds of the 2 audio channels SEQ KA 2 AZ L P T Z set Press these two buttons at the same time to enter exit the PTZ control mode In the PTZ control mode Zoom Press button Zoom out Press button Adjust PTZ angle Press UP DOWN LEFT RIGHT buttons Press I or Power button on the DVR front panel to shutdown Then press and hold first and press 1 or Power to switch to PAL system Press the buttons until the monitor shows video images Press Power button on the DVR front panel to shutdown Then press and hold first and press CO or Po
46. m is triggered the call monitor will show the image of the triggered channel for a period of time AUDIO IN 2 audio in Connect to audio sources such as cameras equipped with the audio function When users start the recording function the audio input will be recorded AUDIO OUT Connect to a monitor or speaker With 1 mono audio output from the same source D V PORT Digital Video Port Connect to a VGA converter EXTERNAL 1 0 PORT Insert the supplied 15PIN DSUB to this port for connecting external devices alarm input external alarm PTZ camera For detailed I O port PIN configuration please refer to Appendix 2 LAN Connect to Internet by LAN cable LINK ACT LED light When the Internet is activated the LED light will be on POWER Connect to the supplied adapter USB Support USB flash drive firmware update and file backup 6 5 REAR PANEL continued Model 2 R 9 T 1 INPUT LOOP INPUT LOOP INPUT LOOP INPUT MONITOR CAL m rr 2 p J E E 27 7 a ON P ON ff JT E Va IN s m oN m N J z f N La ENS 7 gt Y N JAN y qA p S lt TN 52 N e EN VU NS ns 7 Qe CAE Neu Nest Sates VIN 2 XOUT USB UUU
47. n the screen We recommend to clear all the files in the USB flash drive before you backup files in your USB flash drive The backup file can be played directly in your PC via the supplied licensed AP or via other media players Ex Windows Media Player or RealPlayer after the file is converted to AVI format For detailed AP playback please refer to P 35 25 Q For Model 1 Move the cursor to the BACKUP and press ENTER then the screen will show the following options BACKUP USB BACKUP DISK BACKUP Select DISK BACKUP and then press Enter NOTE 1 2 DISK BACKUP SIART TIME 2006 05 12 16 00 00 END TIME 2006 05 12 21 00 00 AVAILABLE SIZE 4083 MB CHANNEL e 01 e 02 X 03 X 05 X 06 X 07 X 09 X 10 X 11 X 13 X 14 X 15 HDD NUM MASTER BACKUP TO DISK SIART Press buttons to open the CD Writer Put the CD into the CD Writer and press Ah buttons again to close Go to DISK BACKUP menu and set the start time end time channels and HDD number Note Select channels by pressing ENTER button to change the symbol in front of the channel number oymbol X means that this channel is not selected Symbol means that this channel is selected After setting up the backup information move the cursor to START and press ENTER While the files are backup to CD users will see the backup completed percentage on the screen After backup files to CD DISK BURN FI
48. oose two of them to secure the HDD And then screw the HDD bracket back to the DVR base Connect the HDD to the power connector and IDE BUS make sure to align the HDD precisely for pin connection And then close the upper cover of the DVR and fasten all the screws you loosened in the step 1 49 Model 2 3 amp 4 Carefully follow the steps to ensure correct installation Note Please set the HDD to Master Mode or Single Mode Fig 1 Fig 2 Fig 3 Fig 4 Fig 5 Note The images shown above may differ from the actual product appearances 1 Open the upper cover of the DVR and screw out the bracket 2 ocrew HDD onto the HDD bracket Refer to Fig 1 amp 2 3 Connect the HDD to the power connector and IDE BUS make sure to align the HDD precisely for pin connection And then screw the HDD bracket onto the DVR base Refer to Fig 3 4 Close the upper cover of the DVR Refer to Fig 4 amp 5 50 APPENDIX 2 PENDIX 2 PIN CONFIGURATION FUNCTION DESCRIPTION RS232 TX DVR can be controlled remotely by the keyboard of PC by using RS 232 serial communication signals RS232 RX DVR can be controlled remotely by the keyboard of PC by using RS 232 serial communication signals 3 6 ALARM INPUT To connect the wire from ALARM INPUT 6 to GND PIN 9 connector DVR will start recording and the buzzer will be on When MENU gt CAMERA gt ALARM is set to Low When the alarm inpu
49. or dial up network Server IP 50 120 45 235 0 Static IP TN Enter the IP atewa Jaleway 590 120 45 225 Enter SEINE Ms E Poss X25 25 net mask and web port and EL WebPot then press APPLY to confirm Dat IP TYPE i Record Setting Static IP PPPoE Alem C PPPOE C DHCP Enter the username and ice password provided by your ISP cui Internet Service Provider Then oT EXIT APPLY set DDNS settings see P 37 DHCP This DHCP function needs to be supported by a router or a cable modem network with DHCP services Choose the DHCP IP Network Backu 259 2 im S set DDNS settings Shit WebPot E see 37 Dae _ IP TYPE Note X Setting Static IP User Name a PPPOE PPPoE and DHCP network Muret mit Online User Info connection types are required to File Path apply DDNS services FIRST to get a Hostname to correspond to the APPLY dynamic IP address Please refer to P 37 for details Note some router brands may need to restart the DVR to get the IP address Detection Wet 355 735 Network Backup Web Port Search List WebPot UEN The DVR can be viewed over the kan hid network with the software AP or a D Cicer web browser Typically the TCP Onlin User nf File Path port used b
50. pop up window will show the message Download process is finished Press PLAY button to directly convert E Network DVR Network Backup _ Mail Start Backup Time FTP 2006 08 18 15 47 29 A D R Device Detection Netwouk Backup Backup Search List Backup Sze 10 MB 7 Copy to CD Timer Record Date Channel 1 Dynamic Download o AG HDDNum MASTER General File Path 0005 Account De Online User Info File Path DVR Network Backup and play the file or Exit to quit Writing cd For AP playback details please see Playback Operation at P 35 2 X 1 A Playback Information B Time Progress Bar C Functions 1 De interlace 2 De blocking 3 OSD 4 AVI Conversion 5 Config Setting 6 Watermark 7 Open Previous 8 Open Next File 7 eS Se 00 01 06 a 0 D Playback Control Buttons Play Stop Pause Fast Rewind Fast Forward E Snapshot F Close the Player NOTE 1 During the file backup process users can still see 2 42 the live image at the same time If Model 3 and Model 4 is under CIF mode the network backup function will save quad images no matter which channel is selected for backup The maximum size per file fo
51. r erue LT LLLT M 7 1 5 REAR PANEL Model 3 erre eL L LLTT T M 8 1 5 REAR PANEL Model 4 rure e T LLLL M 9 GETTING STARTED 2 1 GETTING STARTED 10 BASIC OPERATION 3 1 RECORDING eee r 11 3 2 PLAYBACK M 12 DETAILED MENU CONFIGURATION 4 1 MENU TREE I II f 13 42 MAIN MENU OPTIONS RECORD 14 4 3 MAIN MENU OPTIONS TIMER 15 4 4 MAIN MENU OPTIONS DATE 16 4 5 MAIN MENU OPTIONS ADVANCE 17 4 6 ADVANCE MENU CAMERA 17 4 7 ADVANCE MENU DETECTION 18 4 8 ADVANCE MENU DISPLAY 20 4 9 ADVANCE MENU ALERT nn 21 4 10 ADVANCE MENU REMOTE
52. r Network Backup is 500MB Search List HDD Number select one HDD Master List Type Select one list type All Manual system Alarm Motion List Number Maximum number of the list 128 Download HDD List Press this button to start downloading the list Timer Record In this menu you can schedule different sets of time for recording DATE Choose a day from DATE drop down menu The options are OFF SUN MON TUE WED THU FRI SAT MON FRI SAT SUN and DAILY START Enter the start time of timer recording END Enter the end time of timer recording El Network DVR Search List DDNS Mail FTP HDD Number MASTER l D R Device Detection List Type ALL Network Backup search List Timer Record Max List Number i29 Date Record Setting Gea Download HDD List Account Online User Info File Path EIS e Full Record List EVENT CHANNEL 1 SYSTEM ALL 2006 07 17 18 00 00 MANUAL 2 SYSTEM ALL 2006 07 17 17 39 16 7 SYSTEM 3 SYSTEM ALL 2006 07 17 17 00 00 4 SYSTEM ALL 2006 07 17 16 00 00 7 ALARM 5 SYSTEM ALL 2006 07 17 15 53 41 6 SYSTEM ALL 2006 07 17 15 00 00 V MOTION 7 SYSTEM ALL 2006 07 17 14 29 35 8 SYSTEM ALL 2006 07 17 14 00 00 9 SYSTEM ALL 2006 07 17 13 48 56 10 SYSTEM ALL 2006 07 17 13 03 32 11 SYSTEM ALL 2006 07 17 13 00 00 12 SYSTEM ALL 2006 07 17 12 00 00 13 SYSTEM ALL 2006 07 17 11 41 12 14 SYSTEM
53. s within 48 hours to complete the registration If the confirmation e mail was not received within an hour request password reset http www dyndns org account resetpass Use the DDNS username and password to login the DynDNS Create Hostname Login Account My Service Add Host Services Add Dynamic DNS Host Enter and choose the hostname Click on Add Host DDNS Hostname created E DynDN Add Host Services Microsoft Internet Explorer 1 8 xl RED IAD HAW LL 2 2 1 uzir Gee 4 A 29 dyndns org account services hosts add html CRE gt Logged In User YourHostName Dyn D N 6 Services Settings Log Out Add Host Services A My Senices 2 Account Upgrades MailHop Outbound Recursive DNS SLA My Zones Add Zone Services My Hosts Dynamic DNS Static DNS WebHop MyvebHop Network Monitoring Dynamic DNS 2 Add Dynamic DN yest C4452 NMC PN APS T New Dynamic DNS M Host Hostname lYourHostName dyndns org IP Address 211 75 84 96 dyndns orc Enable Wildcard Mail Exchanger optional game server cc Add Host Reset Form Account Settings ey Copyright 1999 2005 Dynami 3 Mail When the recording is triggered by an alarm or a motion a video copy Mail m file can be captured The DVR
54. sktop Date Record Setting Alarm General Account Online User Info File Path OPERATION VIA IE BROWSER The DVR can be viewed over the network with IE web browser Please install the licensed software AP first This function is suitable in both Windows 2000 and Windows Step 1 Type one IP address into the URL address box and press Enter Then you ll see the following page If the TCP port number is not 80 see the example below IP address 60 121 46 236 Port number 888 gt Key in http 60 121 46 236 888 into the URL address box and press Enter Download JAVA Program 1 Press Download Java button to go to IP Surveillance New Generation JAVA website 2 Select Java Runtime Environment JRE 5 0 Update 8 and press Download 2 Usemame 3 Press Accept License Agreement M Omm 4 Choose Windows offline installation or Windows online installation 5 Take Windows offline installation for an example After downloading the setup file DownloadJava ee run the setup file on the PC NOTE Users can download the latest AP version and update the JAVA program from the website The latest version of JAVA program is JRE 5 0 Update 8 at the time this manual goes to press Step 2 Key in the username and password to login gt Change Resolution Change Image Quality LEE i ERE E res Tm ET I N 0 4 Gee
55. supplied adapter 12 USB Support USB flash drive firmware update and file backup 7 9 REAR PANEL continued Model 3 e 6 GN 1 T PERS m E 9 M of EN 7 LL E SS AN 2 LOOP INPUT LOOP INPUT LOOP INPUT L e irum MONI a LL P AW pe ZU ZEN FERES EE ZET EM OS gt EN S ffi GN ff SX 2 7 S E 3 CN f im f ez NN f REN TA M fff NN Jd PA n i _ C VW C O vA Jj OVE NOVA JJ Qu v Jj j J 7 4 ff ESTO 1B BA DAI NRA BBA AHA 72 EL A JL SS a A N Li lf U a BE AMAA r I gt X PON I J y NUS jj N Je f Y a p f AN Li ON P 4 pmi 7 T eos E E Ag 1 n H 4 LL C e x NEN A Y Ke E 2 ho P di alo io Ne a NOES Mee D V EXTERNAL DC 19V eS e H re F Q 9 00 an 1 750 HI IMPEDANCE When using Loop function please switch to HI IMPEDANCE When you don t use Loop function please switch to 750 2 VIDEO INPUT CHANNEL 1
56. t signal is Low the unit starts to record and buzzer When MENU gt CAMERA gt ALARM is set to High When the alarm input signal is High the unit starts to record and buzzer EXTERNAL Under the normal operation COM connects with NC and disconnects from NO ALARM NC But when any alarm is triggered COM disconnects with NC and connects with NO Attention The voltage restriction is under AV DC 30V EXTERNAL Under the normal operation COM disconnects with NO But when any alarm is ALARM NO triggered COM connects with NO Attention The voltage restriction is under AV DC 30V RS485 B DVR can be controlled remotely by the keyboard of PC by using RS 485 serial communication signals RS485 A DVR can be controlled remotely by the keyboard of PC by using RS 485 serial communication 12 13 PIN OFF ALARM RESET the wire from ALARM RESET PIN 14 to GND PIN 9 connector will disable alarms An external signal to ALARM RESET PIN 14 can be used to reset both ALARM OUTPUT signal and DVR s internal buzzer When any alarm has been triggered the signal becomes Low and all alarm activities will be stopped Under the normal operation the signal remains High EXTERNAL Under the normal operation COM disconnects with NO But when any alarm is ALARM COM triggered COM connects with NO Attention The voltage restriction is under AV DC 30V DC12V E When
57. the backup will be Download process is finished proceeded and a status bar will be displayed DVR Network Backup pop up window will show the message Download process is finished when the backup is succeeded Convert File Press PLAY button to directly convert and play the file or Exit to quit To convert the backup file later please find the file in the designated file path and double click it twice for AVI conversion and file playback You will see the player and video window as shown on the right side For AP playback details please see Playback Operation at P 35 Making backup to a CD After pressing Start Write CD Setting pop up window will show e Choose Close Disc when you don t want to write any more data to this CD after this burning Write CD Setting SOURCE FILE e CHO1_0005 dvr Close Disc Append Player FILE NAME 0005 dvr Available Device LITE ON DVDRW SHW 1635S CANCEL WRITING CD Choose Append Player when you don t have any available player on your PC to open the backup file Press to start making a CD backup or press CANCEL WRITING to only make a backup file to your PC When CD writing is processing DVR Network Backup window will show the message Writing and a status bar will show the writing status When CD writing is completed the CD will be ejected and DVR Network Backup
58. the network information double click to enter the login page Key in Username Password IP Static IP or Host name Dynamic IP as well as Port And then click the green button to connect LOGIN AP Icon Explanation Address Book Press this Es Copy Press this button to button to add a new IP into copy all the software the IP Address Book installation files so users could or choose any preset IP keep all the settings of the address to access the video web server for next software AP software installation on other PCs Search Search available Upgrade Firmware Press this DVR IP addresses in the local me button to upgrade DVR area network and modify the firmware or OSD language files network setting of the DVR The provided firmware and OSD files should be saved at PC first Player Press this button to access and play the recorded files that are saved in your PC NOTE The version of the licensed software will be shown on the login page 31 7 AP Control Panel Digital Device Control Panel 4 CH DVR cde fgh 3 Vipco SERVER m n p q s t v W a Image Transfer Rate Per Second b Data Transfer Rate C Connect Disconnect d Resolution NTSC 320x228 640 x 456 PAL 320x 276 E 640x 552 e Image Quality High Medium Low f Snapshot Press this button to take a snapshot of the image that will be saved in the designated
59. turn on TIMER RECORD ENABLE in RECORD menu see P 14 2 START Select the start time for the recording 3 END Select the finish time for the recording MAIN MENU OPTIONS DATE MENU RECORD TIMER DATE ADVANCE Move the cursor to DATE and press ENTER The screen will show the following options Please DO NOT change the date or time when the recording function is activated See 2 1 GETTING STARTED at 10 for details DATE 2006 MAY 12 16 30 00 FORMAT Y M D DAYLIGHT SAVING ON 1 DATE oet the correct time of the DVR YEAR MONTH DAY HOUR MIN SEC 2 FORMAT There are three formats Y M D M D Y D M Y 3 DAYLIGHT SAVING opecify whether to use daylight saving time and time period START END Daylight saving time can be adjusted manually Enter the daylight saving menu mode to set the start time and the end time and adjust hours of the daylight saving DAYLIGHT SAVING START 4TH SUN MAR 01 00 00 END 4TH SUN OCT 01 00 00 ADJUST 01 00 NOTE The illustrated setting means During the daylight saving time period start from the 4 Sunday of March end on the 4 Sunday of October the DVR system time will plus one hour 16 9 MAIN MENU OPTIONS ADVANCE Move the cursor to ADVANCE and press ENTER The screen will show the following options ADVANCE CAMERA MENU DETECTION DISPLAY RECORD ALERT TIMER REMOTE DATE SYSTEM gt ADVANCE NETWORK BA
60. u settings AW lt P to move the cursor wate to choose the numbers selections ENTER to go to the submenu to confirm the selection MENU to go to the menu OSD to confirm the change to exit the menu OSD 1 MANUAL RECORD ENABLE otart stop the manual recording function 2 EVENT RECORD ENABLE otart stop the event recording function When this function is activated the recording will be triggered by the motion or external alarm 3 TIMER RECORD ENABLE otart stop the timer recording function 4 OVERWRITE Select to overwrite previous recorded videos in HDD When the HDD is full under O W recording mode previous recorded files will be overwritten without further warning notices o RECORD IMG SIZE There are two recording options FRAME and CIF When changing the record image size users need to stop recording first 6 RECORD QUALITY There are four quality settings BEST HIGH NORMAL amp BASIC 7 MANUAL RECORD IPS Recording is activated by pressing the REC button Select the images per second of MANUAL RECORD The options are as following NTSC FRAME 30 15 7 3 PAL FRAME 25 12 6 3 CIF 120 60 30 15 CIF 100 50 25 12 14 EVENT RECORD IPS Recording is activated by events alarm and motion trigger Select the images per second for EVENT RECORD The options are as following NTSC FRAME 30 15 7 3 PAL FRAME 25 12 6 3 CIF 120 60 30 15 CIF 100 50 25
61. ue of the turbo step is 5 it means that when users press one of the button up down left right one click is as clicking 5 times Online User Info File Path 1 REMOTE LOGIN 06 03 24 15 44 34 NO VIDEO LOSS 2 REMOTE LOGIN a 06 03 24 15 43 54 NO REMOTE LOGIN MAX LOG LIST 3 REMOTELOGIN a 06 03 24 15 43 00 NO I7 HDD FULL 4 REMOTELOGIN a 06 03 24 15 42 02 NO Set the maximum number of log list 5 REMOTE LOGIN a 06 03 24 15 41 52 NO M KEY LOCK 6 REMOTE LOGIN 06 03 24 15 41 37 NO KEY UNLOCK 7 REMOTELOGIN a 06 03 24 15 41 27 NO gt Server Log 8 REMOTE LOGIN 06 03 24 15 40 41 NO 5 Press Server Log button to enter the 9 REMOTELOGIN a 06 03 24 15 40 22 NO 10 REMOTE LOGIN c 06 03 24 15 22 06 NO iv FTP FAILED server log list window 11 REMOTE LOGIN 06 03 24 15 16 53 NO 2 HDD ERROR 12 REMOTELOGIN a 06 03 24 15 16 41 NO I DDNS Title 13 REMOTELOGIN c 06 03 24 15 16 25 NO Lh i 14 REMOTE LOGIN a 06 03 24 15 16 09 NO PPPOE Name the title which will be shown on the 15 REMOTE LOGIN 06 03 24 15 15 16 NO DHCP 16 REMOTE LOGIN 06 03 24 15 14 58 NO top of the AP live viewer up to 15 17 REMOTE LOGIN 06 03 24 14 56 05 NO REMOTE LOGIN 06 03 24 14 32 07 NO characters iv POWER ON Account System setting DDNS Mail Set up the user s account
62. wer to switch to NTSC system Press the buttons until the monitor shows video images Press MENU ENTER buttons on the DVR front panel to lock keys and to log in another username For Model 1 press 4 buttons at the same time to open close the CD WRITER REAR PANEL Model 1 oO o 0m __ _ KEA 1 A D d d as 5 N y PS il LOOP INPUT LOOP INPUT LOOP INPUT Loop INPUT MONITOR CALL v 5 x S 74 N PA N A N PA N N 72 N j i Jh N 4 N NC P N A NC 7 4 N N im N J Tox uod NL Mu ieu A RE raris oH USB 2 VERSA D O 6606 ej O ee i oj LINK amp gt M a SR 2 ACT gt D V EXTERNAL I O 6 LAN DC 19V D 9 10 dU 10 11 12 75 HI IMPEDANCE When using Loop function please switch to HI IMPEDANCE When you don t use Loop function please switch to 75Q VIDEO INPUT CHANNEL 1 4 Connect to video sources such as cameras LOOP CHANNEL 1 4 Video output MONITOR Connect to Main monitor CALL MONITOR Connect to CALL monitor Show the channel switch display When the alar
63. will T oo BEE Verity Yes No send an e mail notification to the ae OE Cv mmm assigned recipients up to 5 Network Backup DELETE Fere nn recipients Timer Record Mel comt ote Record Setting catherine lee Q ya com Alarm To activate the e mail notification ode ta _ function please enable the function nel of e mail notification in the Alarm setting first page 43 Add the recipients email accounts in Mail Account column For detailed information SMTP server username and password please get from your e mail system supplier Please type the entire email address in the Mail from column to ensure emails will not be blocked by SMTP n some cases mail servers require to verify password Please enter the user name and password After finishing the settings press APPLY to confirm FTP When the recording is triggered by an alarm or a motion a video copy file can be captured And the DVR will upload the captured images to the System setting UserName catherine lee Password cce assigned FIP site Network Backup oe p Enter the detailed FTP information Tne Recor Note Directory icatherine slarm notification _________________ To activate the FTP notification function please enable the function of FTP notification in the Alarm setting first
64. y HTTP is 80 However in some cases it is better to change this port number for added flexibility or security The valid number ranges from 1 to 9999 36 DDNS DDNS is a service for transforming the EEE dynamic IP corresponding to a specific Hostname DDNS Apply Go to a website which provides free DNs 168 95 1 DDNS v Enable Disable 5 Network Backup User Name hostname DDNS services and apply a Hostname Search List See the example below D rem coU s P Setting Domain hostnam dyndnsorg Enable the DDNS function System Account Enter your DDNS user name into User Par ENS Name column File Path Enter your DDNS password into Password column Enter your host name into Domain column Choose one DDNS system name from System Name column After setting press APPLY to confirm Auto When using DHCP network connection the AUTO check box will appear on this window The system will automatically get DNS information from the Internet if this check box is selected DDNS APPLY EXAMPLE LJ Goto a website which provide free DDNS services For example http www dyndns org Create an account in DynDNS LJ After creating one account users will receive an confirmation e mail within a few minutes To complete the registration please follow the instructions received Users must complete these step
65. zzer notification when the HDD available capacity is only xxx GB left ALARM DURATION SEC Press ENTER or or button to set the duration time of alarm recording 5 10 20 40 secs PRE ALARM oet the pre alarm function on 8MB off When pre alarm and event record functions are both activated the DVR will record a 8MB file before any alarm motion is triggered 21 10 ADVANCE MENU _ REMOTE Move the cursor to REMOTE and press ENTER The screen will show the following options REMOTE DEVICE PROTOCOL PTZ P D CAMERA NORMAL CAMERA NORMAL CAMERA NORMAL 1 TITLE Title of each camera 2 DEVICE Select to control normal cameras or PTZ cameras for each channel 3 ID set the ID number 0 255 of PTZ camera Note After connecting to PTZ correctly the default ID of PTZ will be shown on the screen Note Please refer to the below instruction PTZ Connection and Control 4 PROTOCOL oelect NORMAL our protocol or PELCO D protocol 5 RATE set the baud rate of each channel 2400 4800 9600 19200 57600 For the connected cameras such as PTZ and speed dome cameras etc please make sure the baud rate setting is the same as the setting here PTZ Connection and Control Device Our own brand PTZ Pelco D protocol PTZ Connection For detailed connection and instructions please refer to PTZ manuals Note As for RS485A and RS485B Port

User`s Manual - Security Alarm Shop

Contents

Download Pdf Manuals

Related Search

Related Contents