Installation Guide
Contents
1. NETGEAR Connect with Innovation Powerline AV 200 Nano Dual Port XAV2602 Installation Guide O 2011 NETGEAR Inc All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means without the written permission of NETGEAR Inc DO NOT stack equipment or place equipment in tight spaces or in drawers Be sure your equipment is surrounded by at least 2 in of air space Technical Support Thank you for choosing NETGEAR To register your product get the latest product updates or get support online visit us at http support netgear com Phone US amp Canada only 1 888 NETGEAR Phone Other Countries See http support netgear com app answers detail a_id 984 Trademarks NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice Other brand and product names are registered trademarks or trademarks of their respective holders O 2011 NETGEAR Inc All rights reserved Statement of Conditions In the interest of improving internal design operational function and or reliability NETGEAR reserves the right to make changes to the products described in this document without notice NETGEAR does not assume any liability that may occur2. socket or into an attached power strip The device is not intended to be used with home appliances such as air conditioners power tools space heaters fans hair dryers ovens or refrigerators Check the electrical current for any appliance used with the device and do not exceed home and product outlet ratings and electrical requirements 14 Compliance This symbol was placed in accordance with the European Union Directive 2002 96 on the Waste Electrical and Electronic Equipment the WEEE Directive If disposed of within the European Union this product should be treated and a recycled in accordance with the laws of your jurisdiction implementing the WEEE Directive NETGEAR Inc 350 East Plumeria Drive San Jose CA 95134 USA MM ce sms 201 13402 01
3. Powerline Devices To create a Powerline network you need at least two compatible Powerline devices Your Powerline adapter can share a Powerline network with these compatible NETGEAR devices XAV101 XAV1004 XAV2001 XAV2101 XAV1101 XAV1301 XAV1601 XAV2501 XAV5001 XAV5501 XAV5601 XAV5004 and XAVN2001 For a complete list of HomePlug AV certified devices go to www homeplug org certified producis Install Your Powerline Adapter The filtered AC socket removes some electrical noise Plugging a nearby device into the filtered AC socket improves performance The ports use Quality of Service QoS to prioritize traffic Port 1 on the left is the high priority video port You can plug a power strip into the filtered outlet but do not plug your Powerline adapter into a power strip You can set up a new Powerline network with your XAV2602 and a compatible Powerline device or you can add your XAV2602 to an existing Powerline network Set up a new Powerline network 1 Obtain at least one more Powerline device that is compatible with the XAV2602 Plug the Powerline AV 200 compatible adapter into an electrical outlet and plug the XAV2602 adapter into another electrical outlet e The Power LED O on the XAV2602 lights up e If both of the devices you connected are powered on and establish communication the Powerline LED on the XAV 2602 lights up If you have mor
4. due to the use or application of the product s or circuit layout s described herein Package Contents Products sold in some locations include a Resource CD Ethernet cable Powerline AV 200 North America Your adapter might look like one of these UK France Germany Europe Australia Switzerland 3 Hardware Features Filtered AC _ gt socket Factory Reset Power LED io button Powerline LED ee GE Security Ethernet LED NE button Ethernet Port 1 Ethernet Port 2 for for higher lower priority data priority traffic traffic LEDs The LEDs indicate the status of your Powerline adapter When you plug in the adapter the Power LED O lights up and turns green The adapter is not active when no Ethernet link has occurred for more than 10 minutes The adapter enters power saving mode and the Power LED turns amber The Ethernet LED lights up when you connect a powered on Ethernet device to at least one Ethernet port The Powerline LED turns on when the adapter detects at least one other compatible Powerline device The Pick A Plug feature lets you pick the electrical outlet with the strongest link rate indicated by the color displayed by the Powerline LED 8 Green Link rate gt 80 Mbps Best 5 Amber Link rate gt 50 and lt 80 Mbps Better amp Red Link rate lt 50 Mbps Good Compatible NETGEAR
5. U Declarations of Conformity website at http support netgear com app answers detail a_id 11621 For GNU General Public License GPL related information please visit the NETGEAR support site at http support netgear com app answers detail a_id 2649 12 Safety Information AC input 100 125V 0 2A max in North America and 200 250V 0 2A max in other regions for the XAV2602 Operating temperature OC to 40C The socket outlet shall be installed near the equipment and be easily accessible Powerline adapter ratings maximum load EU 16A 250V FR 16A 250V UK 13A 250V AU 10A 250V NA 15A 125V Swiss 10A 250V Only power cords are allowed to be inserted into the filtered AC outlet no other equipment with a direct plug in is allowed The power cord needs to be a maximum of 1m long and a minimum of 0 75 mm square of cross sectional area Do not plug devices into the Powerline adapter filtered AC outlet that exceed the product ratings The output voltage of the filtered AC outlet is the same as the power outlet that the Powerline adapter is plugged into To help avoid damaging your system be sure that the attached devices are electrically rated to operate with the power available in your location 13 If the input AC voltage is less than 125Vac the device plugged into the filtered AC socket of the Powerline adapter might not perform as well as expected DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC
6. ch adapter has powered up and its Power LED is solid green Pressing this button too soon can temporarily disable Powerline communication If this occurs use the Factory Reset button to return the Powerline adapter to its factory default settings To secure your Powerline network 1 Make sure the Power LED is solid green If it is amber connect a device to one of the Ethernet ports so the adapter exits power saving mode 2 On the first Powerline adapter press its Security button for 2 seconds and release the button The Power LED blinks green while the adapter is setting up security 3 Within 2 minutes go to the next Powerline adapter and press its Security button for 2 seconds and release the button After security is set the Power LED turns solid green The adapter can communicate over the network The Powerline LED is blinking or solid 11 Technical Support Thank you for selecting NETGEAR producis After installing your device locate the serial number on the label of your product and use it to register your product at https my netgear com Registration is required before you can use the telephone support service Registration through the NETGEAR website is strongly recommended Go to http support netgear com for product updates and web support For additional information about setting up configuring and using your Powerline AV 200 Adapter see the User Manual For complete DoC please visit the NETGEAR E
7. e than one compatible adapter plug them into other electrical outlets User Ethernet cables one is included in the package to connect your equipment to the Ethernet ports on the adapter e Port 1 is for high priority traffic used by devices such as gaming consoles e Port 2 is for devices with lower priority traffic You can use both ports or only one port 8 The Powerline LED turns on for each Powerline adapter when they detect each other The devices automatically form a Powerline network Add the adapter to a secure Powerline network Your Powerline network is already secured if you used the Security button or the Powerline Utility to set up security 1 Make sure that the Powerline devices you already use are compatible to the XAV2602 Plug the XAV2602 into another electrical outlet Press the Security button on one of your existing Powerline adapters for 2 seconds and release the button Then within 2 minutes press the Security button on the XAV2602 for 2 seconds and release the button The Power LED on the XAV2602 starts to blink as security is setting up The Powerline LED turns on for each Powerline adapter when they detect each other They automatically form a Powerline network Use Ethernet cables one is included in the package to connect your equipment to the Ethernet ports on the adapter e Port 1 is for high priority traffic used by devices such as gaming consoles e Port 2 is for devices with lower
8. priority traffic You can use both ports or only one port 9 Add the adapter to a Powerline network that has not been secured 1 Check to make sure that the Powerline devices you already use are compatible 2 Plug the XAV2602 adapter into another electrical outlet The XAV2602 will start to communicate with other Powerline devices indicated by the linking Powerline LED 3 Use Ethernet cables one is included in the package to connect your equipment to the Ethernet ports on the adapter e Port 1 is for high priority traffic used by devices such as gaming consoles e Port 2 is for devices with lower priority traffic You can use both ports or only one port 4 NETGEAR recommends that you secure your Powerline network to protect your personal information and media from unwanted access If you do not set up security on your network anyone nearby with a Powerline network can potentially use his or her connection to gain access to your network and to information you send over the Internet This is especially relevant in settings such as apartment buildings office buildings dorm rooms and other densely populated areas 10 Secure Your Powerline Network A Powerline network forms when at least two compatible Powerline devices communicate After the Powerline network is up and running you can use the Security buttons on the adapters to add encryption to your Powerline network CAUTION Do not press the Security button until ea
Download Pdf Manuals
Related Search