3684视像门铃中性标准英文版1.4 DEL.cdr
Contents
1. 1 IQIQIoloIoIolo oO 2 Z Fornormal open lock DC Power Outdoor Station The maximum output current can be 1A Connection Mode 2 9 12V For normal close lock WOO 9 12VE GND LJDC Power Afia Outdoor Station ae a DC Power The maximum output current can be 1A H Operations Turning On Off To turn the indoor phone on press and hold Eea a To turn the indoor phone off press and hold Register First press O beneath Menu on the Receiver then select the Register menu Second press the Call button of the Outdoor station then hold the Register key on the back of the Outdoor station until the LED light blinks Once a prompt tone is heard the Outdoor station has been registered to the Receiver successfully If twice prompts tones is heard the registration was unsuccessful turn off the Receiver and remove the batteries from the Outdoor station before you hold the Register key Then turn on the Receiver again re install the Outdoor station s batteries and try again Register Button with name tag on it E Operations Register Continued The Receiver can support up to 4 Outdoor stations 1 When you have registered one Outdoor station the register interface will display as follow Register 2 2 When you have registered 4 Ou2. lt Jor Right gt to select the volume that you like Each time you press Left lt or Right gt the receiver sounds with the selected volume 4 Press beneath Back to save the settings and return to the previous menu Note e Also you can use Left lt or Right gt key to adjust the volume in the standby mode m Menu Description continued Chapter3 Brightness This function allows you to adjust the light level 9 levels are adjustable 1 Press beneath Menu to display the main menu items 2 Press Up A or Down V to choose H gt then press beneath Select 3 Press Left lt or Right gt to select the light level that you like Each time you press Left lt or Right gt the receiver displays with the selected light level 4 Press beneath Back to save the settings and return to the previous menu Note e Also you can use Up A or Down vy key to adjust the light level in the standby mode H Menu Description continued Chapter 4 Key Tone Every time you press a key your receiver acknowledges it with a key tone You can disable the key tones for a silent use In certain error conditions a warning tone will sound when an incorrect key is pressed 1 Press beneath Menu to display the main menu items 2 Press Up A or Down V to choose then press O beneath Select 3 Press Up A or Down V to choose On or Off to enable or disab
3. 5 Microphone and speakerphone Brightness and talk volume are adjustable Crystal sound quality Transmitting distance with up to 200m range out of doors Transmitting distance with up to 50m range indoors Remote door opening Optional DIY installation to save high labor cost m Unpacking Once you have unpacked your product make sure that all the parts shown below are available If any pieces are missing or broken please promptly call your dealer i Antenna Outdoor station Optional 3 AAA Ni MH Adapter batteries 7 5V 300mA Wireless Digital Video Doorbell CL 3684 USER S MANUAL Outdoor station rear cover m Layout Outdoor Station Speaker Sensor light LED light Call button with name tag on it Microphone Receiver Left Soft key Accept key Charger LCD display Navigation key Speaker Right Soft key Manual Snap Power End key Battery Unlock key compartment cover Microphone Charging pins Antenna Antenna Locking Switch Charge pins E Installing Batteries Receiver The rechargeable Ni MH batteries AAA size 1 2V 800mAh come with your receiver Install the batteries before use Insert new batteries as indicated matching correct polarity To replace the battery cover slide the cover up until it snaps in place Notes e Reversing the orientation may damage the handset e The batteries need to be repla
4. Mbps Data Rate Transmitting Power 19dBm TYP Modulation Type GFSK FSK Transmitting Distance Outdoor 200m Indoor 50m Image Sensor Type 1 4 Color CMOS Image Sensor Effective Pixels H 320 V 240 Image Processing Motion JPEG mage Resolution Frame Rate H 320 V 240 25fps White Balance Auto Lens 4 9mm F2 8 Viewing Angle Diagonal 1 LUX without LED illumination E 6 LEDs Power Requirement 9 12V DC 5 2 LR14 C 1 5V batterie 500mA Max cells Power Consumption 400mA Max 12V DC Operating Temperature 30 C 40 C Operating Humidity 0 85 RH Weight Size WXHXD 185 68 50mm Hm Technical Specification Item Detail Power Consumption 450mA Max Operating Temperature 10 C 40 C Operating Humidity 0 85 RH Receiver 165 50 27mm Size WXHXD Charger 79 77 42mm No of outdoor stations supported Design and specifications are subject to change without notice
5. Wireless Digital Video Doorbell CL 3684 USER S MANUAL E Prior To Use Congratulations on purchasing our high quality product Please read the manual carefully before installing your system and follow all of the directions to ensure proper installation Safety Precautions To reduce the risk of electrical shock and injury please follow these basic safety precautions before using the product 1 Carefully read and observe the instructions in this manual 2 Follow all warnings marked on the unit 3 Must set the time and the date when replace batteries 4 Unplug this product from the wall outlet before cleaning then use a damp cloth to wipe Do not use liquid or aerosol cleaners 5 Do not place objects on the line cord that may cause damage 6 Do not place the Outdoor station near the metal 7 Pay attention to the polarity of the batteries insert the rechargeable batteries in accordance with polarity symbols this instruction is found in the installing batteries section 8 Keep out of the reach of children 9 Use only in the described manner 10 Stop using if it becomes damaged vvvvy gt gt gt gt gt gt gt gt Introduction Supports up to 4 outdoor units 2 4 320x240 QVGA LCD display Video resolution 320 x 240 with 25pics per second Wide angle lens and LED for night vision Long standby doorbell battery up to 2 years or connect with DC 9 12V Water proof outdoor station Ip5
6. ced if they do not recover their full storage capacities after recharging e When replacing the batteries always use good quality Ni MH re chargeable batteries Never use other batteries or conventional alkaline batteries Outdoor station 1 Install two C size batteries not supplied into the battery compartment 2 Drill four screws to fix the battery cover up E Charging Receiver Important Note Before initial operation YOU SHOULD FULLY CHARGE THE RECEIVER for about 15 hours To charge the receiver you should place it on the charger E Installation Instruction Receiver Connect the modular end of the AC power adapter to the power jack of the charger then plug the AC adapter into a standard AC wall outlet To AC wall outlet Outdoor station 1 Choose a proper location for the outdoor station Be sure to consider the average height of visitors 2 Align the rain cover and screws with the holes in the wall 3 Install the outdoor station into the rain cover Please refer to the picture 3 below 4 Drill a screw to fix and finish the installation Away from electrical In a HIGH and CENTRAL Slide the appliances such as a TV location with no antenna locking personal computer or obstructions such as walls switch to NN another cordless phone Microwave oven and WIFI unlocking position the receiver antenna will pop up to receive better signal er ye CLEO E Diagram Connection Mode
7. ep the LCD shows the next photo 5 Press beneath Back to return to the previous menu Chapter 7 Default Setting This function allows you to reset the receiver settings to the factory default 1 Press beneath Menu to display the main menu items 2 Press Up A or Down v to choose amp then press beneath Select 3 Press Up A or Down v to choose YES or NO to enable or disable the function 4 Press Oo beneath Select to save the settings Result After resetting the receiver will return to standby mode Note e If you reset the receiver to the factory default all of the settings will return to the factory default E Engineering Mode Delete the Registered Outdoor Station 1 Press and hold the and beneath Menu at the same time about 5 seconds in standby mode then the display will show as follow 2 After 5 seconds it will exit automatically Change the Unlock Time 1 press and hold the and at the same time about 5 seconds in standby mode then the display will show as follow 2 Press Left lt or Right gt to select the Outdoor station 3 Press Up A or Down v to select the unlock time 1 25 are selectable then press the Right soft key to confirm the display will show SAVE OK 4 After 5 seconds it will exit automatically Hm Technical Specification Detail Outdoor station Transmit Frequency Range 2 400GHz 2 4835GHz 2 0
8. le the function 4 Press beneath Select to save the settings and return to the previous menu E Menu Description continued Chapter 5 Snap Setting The unique Snap Shot function records up to 50 photos of whoever visit your home whether you are there or not To get this Auto Snap please set it up in the receiver as follow 1 Press beneath Menu to display the main menu items 2 Press Up A or Down to choose e then press beneath Select 3 Press Up or Down to choose On or Off to enable or disable the function 4 Press beneath Select to save the settings and return to the previous menu With this Auto Snap On the camera will take a photo of visitor automatically when visitors press the Call button on the Outdoor station You then can pick up this photo easily in the receiver H Menu Description continued Chapter 6 Snap Show You can save or delete the recorded photos under this menu The outdoor station s number will also be displayed on the upper left of photo correspondingly 1 Press 2 beneath Menu to display the main menu items 2 Press Up A or Down V to choose then press beneath Select 3 Press Left lt or Right gt to browse pictures 4 lf you want to delete the photo use Left lt or Right gt to choose the photo you want to then press the beneath Del The display will show Delete Press O beneath Yes to confirm After a be
9. nversation to unlock the door press re on the Receiver Light Sensor When someone presses the Call button on the Outdoor station all the LED lights will light on if the ambient environment gets too dim m Menu Description Chapter 1 Date amp Time 1 Press beneath Menu to display the main menu items 2 Press Up A or Down v to choose O then press beneath Select 3 If you want to set the time you can press Left lt or Right gt to choose the Hour or the Minute and press the Up A or Down to adjust 4 lf you want to select the date you can press Left lt or Right gt to choose the Year or the Month or the Date and press the Up A or Down y to adjust 5 Press beneath Back to return to the previous menu Notes e The time format is 24 hour format and the date format is YY MM DD e The Date amp Time must be set beforehand to ensure that the time displayed on the monitoring pictures are correct e When you replace batteries you must set the time and the date again e The Date amp Time setting order is Hour gt Minute gt Year gt Month gt Date m Menu Description continued Chapter2 Volume This function allows you to adjust the volume 9 levels are adjustable during a call 1 Press beneath Menu to display the main menu items 2 Press Up A or Down w to choose aj then press beneath Select 3 Press Left
10. tdoor stations the register interface will display as follow Register Full E Operations Monitor About the monitor function the LCD will automatically display the corresponding menu according to the registered Outdoor stations 1 In the standby mode press beneath Mon 2 When registers one Outdoor station the LCD will display 1 Monitor 3 When registers two or more Outdoor stations the LCD will display 1 2 Monitor Pictures below and you can press Up A or Down V to choose the monitor which you need then press beneath Select Select Monitor Select Monitor Select Monitor H 1 Monitor H 1 Monitor H 1 Monitor H 2 Monitor H 2 Monitor 2 Monitor H 3 Monitor H 3 Monitor H 4 Monitor Select Select Select Back H Operations Calling Receiver In standby mode press the Call button on the Outdoor station The corresponding receiver rings and the image of the visitor appears on the LCD of the receiver 1 If the master does not want to answer press T to cancel the ringer and the video 2 After the master press the receiver will stop ringing Then the conversation starts 3 Press S to end the conversation Notes e The conversation can be up to 2 minutes After 2 minutes the line will be disconnected automatically e The monitor process can be up to 5 minutes After 5 minutes the receiver will exit monitor mode automatically Unlocking During a co
Download Pdf Manuals
Related Search