RFID READER RFID-IDR-232N USER`S MANUAL
Contents
1. read address of a 125 KHz passive tag Move the tag slowly towards RFID IDR 232N top at approximately 2cm from the casing the buzzer will sound LED will turn to green when the tag move slowly towards RFID IDR 232N and HyperTerminal will show the tag s ID in ASCII Created by Cytron Technologies Sdn Bhd All Right Reserved 6 Cytr on 5 ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N RFID Hyper Terminal File Edit View Call Transfer Help 000007974470 Connected 0 00 23 4uto detect 9600 8 N 1 Figure above show the protocol of the RFID Reader The extra byte of data at the first and the last of tag ID s If the protocol users have is different from the protocol above please contact us at sales cytron com my immediately Created by Cytron Technologies Sdn Bhd All Right Reserved 7 Cytr on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 5 PIN CONFIGURATION If RFID IDR 232N is require on embedded system where no PC is available hardware modification and interface is necessary USB will provide 5V and ground to RFID IDR 232N while female DB9 is communication line to PC Below show the pin configuration of USB RJ11 and DB9 of RFID IDR 232 VCC USB female Connector N PIN No Function NA Tx NA Female DB9 pin Configuration Created by Cytron Technologies Sdn Bhd All Right Reserved 8 Cytr on gt ROBOT HEAD to TOE2. Cytron Technologie RFID READER RFID IDR 232N USER S MANUAL V1 2 September 2010 Information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates It is your responsibility to ensure that your application meets with your specifications No representation or warranty is given and no liability is assumed by Cytron Technologies Incorporated with respect to the accuracy or use of such information or infringement of patents or other intellectual property rights arising from such use or otherwise Use of Cytron Technologies s products as critical components in life support systems is not authorized except with express written approval by Cytron Technologies No licenses are conveyed implicitly or otherwise under any intellectual property rights ROBOT HEAD to TOE Cytron 5 Technologie Product User s Manual RFID IDR 232N Index 1 Introduction and Overview 2 Packing List 3 Power Supply 4 Using RFID IDR 232N 5 Pin Configuration 6 RFID IDR 232N Protocol 7 Warranty Created by Cytron Technologies Sdn Bhd All Right Reserved 10 11 Cytr on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 1 INTRODUCTION AND OVERVIEW RFID IDR 232N is plug and use RFID reader It has been designed with capabilities and features of e Low cost solution for reading passive RFID transponder
3. Technologie Product User s Manual RFID IDR 232N PIN No Function 5V NA NA X RJ11 female socket Configuration RJ11 male pin Configuration Created by Cytron Technologies Sdn Bhd All Right Reserved Cytr on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 6 RFID IDR 232N Protocol High level language which can access to serial port can be used to develop program for RFID IDR 232N on desktop PC or laptop Some examples of high level language are Visual Basic Labview and Visual C If RFID IDR 232N is connected to microcontroller Assembly language or C compiler depending on microcontroller type can be used to write program RFID IDR 232N will read the ID from RFID tag if the tag is near enough to RFID Reader The ID is normally 10 digit of number RFID IDR 232N will automatically send this ID with 1 byte of Start of heading 0x01 followed by 10 byte of ASCII character ID and 1 byte of Start of text 0x02 1 byte 1 byte Start of Heading Start of Text The 1 byte will be read is Start of heading followed with 10 bytes of RFID Identification number The last 1 byte is Start of Text Created by Cytron Technologies Sdn Bhd All Right Reserved 10 Cytr on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 7 WARRANTY gt Product warranty is valid for 6 months gt Warranty only applies to manufact
4. UPPLY RFID IDR 232N power source is from USB connection There is no communication through USB connector only 5V is taken from this connector The communication line is RS232 cable serial port with female DB9 e Connect the USB to the USB port of PC or laptop After providing power to RFID IDR 232N the LED will light ON with the RED color and buzzer will beep Created by Cytron Technologies Sdn Bhd All Right Reserved G yer on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 4 USING RFID IDR 232N The hardware connection must be setup before RFID IDR 232N can be used Connect RJ11 cable connector into RFID Reader as shown in figure The communication line has to be connected to serial port of PC Created by Cytron Technologies Sdn Bhd All Right Reserved 5 Cytr on gt ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N After both power and communication line are connected the HyperTerminal software need to be configured a Open HyperTerminal b Choose COM1 if you connect to COM1 c Configure the properties of COM to i Baud rate Bits per second 9600 ii Data bits 8 iii Parity None iv Stop bits 1 v Flow control None COMI Properties Port Settings Bits per second 2400 Data bits x Parity None vy Stop bits 1 x Flow control Hardware E a Now RFID IDR 232N is ready to
5. tags e Industrial grade casing for better outlook and protection e Every reader has been tested before is being shipped e 9600 baud RS232 serial interface output only to PC e Fully operation with 5VDC power supply from USB port e Buzzer as sound indication of activity e Red and green color LED for visual indication of activity e Standard RS232 serial cable female ready to plug to desktop PC e USB as power source from desktop PC e 2cm reading range e 0 1s response time e 12 bytes of data received include start of heading RFID ID and start of text RFID IDR 232N is fully working RFID tags reader and can be applied in e Security system e Car parking e Office e Hypermarket for item pricing e Student projects RFID IDR 232N can be connected to PC or microcontroller as part of embedded system This document elaborates the method in using RFID IDR 23 Created by Cytron Technologies Sdn Bhd All Right Reserved 2 Cytr on 5 ROBOT HEAD to TOE Technologie Product User s Manual RFID IDR 232N 2 PACKING LIST Please check the parts and components according to the packing list If there are any parts missing please contact us at sales cytron com my immediately 1 1 x RFID IDR 232N with e Female RS232 cable with USB and RJ11 Created by Cytron Technologies Sdn Bhd All Right Reserved 3 Product User s Manual RFID IDR 232N Cytr on gt ROBOT HEAD to TOE Technologie 3 POWER S
6. uring defect gt Damage caused by mis use is not covered under warranty gt Warranty does not cover freight cost for both ways Prepared by Cytron Technologies Sdn Bhd 19 Jalan Kebudayaan 1A Taman Universiti 81300 Skudai Johor Malaysia Tel 607 521 3178 Fax 607 521 1861 URL www cytron com my Email support cytron com my sales cytron com my Created by Cytron Technologies Sdn Bhd All Right Reserved 11
Download Pdf Manuals
Related Search