Quick Start Guide
Contents
1. D Pressing the TEST button while the unit is on initiates a comprehensive system self test When the unit passes all internal checks the message PASS is displayed Refer to the user s manual for more information on testing the GHD2. Genesis Handheld Directional GHD electronics Certified ISO 9001 This Quick Start guide explains how to set up your Genesis Handheld Directional and use its key features Once you re set up you can learn more about Decatur Radar at www DecaturElectronics com Connecting the GHD to Power 1 Plug the radar s power cord into your vehicle s cigarette lighter receptacle If you are using a separate battery pack as a power source plug the radar s power cord into the battery pack s receptacle Powering on the GHD The operation of the Genesis Handheld Directional GHD is controlled by the 5 button keypad and the trigger 2 Press the PWR button on the keypad to turn the radar on or off The display should briefly display all of the segments and icons as shown in Figure 1 Only the POWER and HOLD icons should remain on Figure 1 GHD display amp keypad Menu Selections There are several menu selections available Refer to the user s manual for detailed information on all the selections Only Directionality and Faster are covered in the quick start Choosing Directionality 3 By default the GHD is set to pick up traffic both coming towards and going away from the radar If you want to change the setting to read speeds only coming toward the radar t or only going away from the radar A then press the menu button until dir is displayed in the window QUICK START GUIDE Rev 6 30 2011 Onc
3. e dir is displayed press the SEL button to choose toward t away A or both directions tA Once the setting has been chosen that setting will be retained in memory Choosing Faster Mode 4 By default the GHD operates in Strongest signal mode You can active faster mode by pushing the FAST button Taking a Speed Reading 5 To measure the speed of target vehicles pull and hold the trigger When you pull the trigger the HOLD icon will be replaced with the XMIIT icon indicating that the radar is now transmitting and the speed of the target vehicle will show in the display Locking a Speed Reading 6 When you want to lock a speed release the trigger then quickly pull it in again within 1 2 second The radar will take the speed from the left side of the display and move it to the right side of the display and lock it in At the same time the GHD will continue to track speeds and display speeds in the left side of the display as long as you continue to hold the trigger in The locked speed will then flash alternately between the locked speed and the directional indicator t means it is moving towards from you and A means it is moving away from you Releasing a Locked Speed 7 To release a locked speed pull and release the trigger without any targets present Powering Off the GHD 8 To power the GHD off press the PWR button on the keypad The word OFF will be displayed and the radar will power down Testing the GH
Download Pdf Manuals
Related Search