Elation Professional™ 6122 S. Eastern Ave. Los Angeles, CA
Contents
1. Elation Professional Los Angeles Ca PAi www ElationLighting com ELAR DW BRICK TM 12 2 YEAR LIMITED WARRANTY A Elation Professionale hereby warrants to the original purchaser Elation Professionale products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professionale will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professionale shall have no liability what so ever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professionale concludes after inspection affects the reliability o2. 7 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice Elation Professional Los Angeles Ca 34 www ElationLighting com Rev 01 06 2011 Elation Professional 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www ElationLighting com Info ElationLighitng com Version 1 3
3. ELATION Keen ET SE SS ELAR DW BRICK Elation Professional M 6122 S Eastern Ave Los Angeles CA 90040 www elationlighting com Rev 01 06 2011 Version 1 3 e S AL oe ZS 10 11 12 13 14 15 16 17 Elation Professional Los Angeles Ca 1 www ElationLighting com ELAR DW BRICK TM TABLE OF CONTENS CONTENTS General Information 2 As Hino eo EE 2 s plo AC d a e A SN a sasata 2 EE EE 2 d Warranty REGISWANOM BEE 3 Sale vli If U Dn EN 4 SS 6 General Guide IME EEN 7 O enee 8 MOUNTING and Installation 10 Understanding TK 12 as BMXCOMEeCIONS Eesen 12 D DMX We Un te EE 13 SE la e Ee Ee EE 14 d Understanding DMX Addressing 14 Display LED AOI u uu u uu u u Eno kawsakapuq 16 DISPLAY MENU eebe 17 AS PPP A 24 Cleaning and Mamtenance cece eee e ee eec esse eeeeeeeeeeeaeeeaeegeecaeeaeenenas 27 VV IL E 28 mia Gli DAU 72 u PR E O 30 Dimensional Drawings 31 Change lens to get different beam angles 32 ei EE 33 Technical Gpecifcaions ccc cce eee e cece eee eee eee esas eaeeeee eee eateaeeeeaeeeeaes 34 ELAR DW BRICK TM 1 GENERAL INFORMATION INTRODUCTIO
4. 0 255 Cool White group4 Channel 8 Warm White 0 255 Warm White group4 Channel 9 Strobe Strobe effect slow to fast 96 127 No function shutter open 128 159 Pulse effect in sequences 160 191 No function shutter open 192 223 Random strobe effect slow to fast 224 255 No function shutter open Channel 10 dimming 0 255 Dimming 0 Black 255 100 Elation Professional Los Angeles Ca 26 www ElationLighting com ELAR DW BRICK TM 11 CLEANING AND MAINTENANCE The consider the following point during normal service and inspection 1 Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall 2 Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed CAUTION Disconnect from mains before starting maintenance operation We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use alcohol or solvents There are no user serviceable parts inside this please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local dealer
5. Angeles Ca 9 www ElationLighting com ELAR DW BRICK TM 6 MOUNTING AND INSTALLATION Mounting points Overhead mounting requires extensive experience including amongst others calculating working load limits a fine knowledge of the installation material being used and periodic safety inspection of all installation material and the fixture If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet Mounting The ELAR DW BRICK is fully operational in three different mounting positions hanging upside down from a ceiling side mounted or set on a flat level surface Be sure this fixture is kept at least 0 5m away from any flammable materials decoration etc When clamp mounting always use and install the supplied safety cable as an added safety measure to prevent accidental damage in the event of a clamp failure See the image below TAZA ADA lt y AE RAS dra g ze EA AS S 2 x S S aO O 2 AY 7 S Va xZ AN ETA Pe assis AS s s S d er zen e WC e e Y Elation Professional Los Angeles Ca 10 www ElationLighting com ELAR DW BRICK TM CAUTION Be sure all electrical connections are performed by a qualified electr
6. Software version Manual adjust intensity Life time of machine running Password of clear time 038 Clear machine running time Select steps of program Aug Sue Senge C XXX 000 255 W XXX 000 255 Edit the internal scenes T XXX 000 255 S XXX 000 255 D XXX 000 255 XXX XXX X 000 1s 999 9s ON OFF Edit program via controller 1 If the fixture does not receive a DMX signal the menu display will flash repeatedly 2 TIME Adjust the hold time for each scene in built in chase programs 3 FADE Aqjust the fade time between each scene in the built in programs Elation Professional Los Angeles Ca 17 www ElationLighting com ELAR DW BRICK TM 9 1 MODE Function Mode 9 1 1 lt ADDR gt DMX address setting This function is used to set or adjust the fixture s starting DMX address Every device controlled by DMX has to have a unique starting address The addressing feature is what allows DMX to function properly The DMX address of a fixture is what allows it to communicate with a controller properly The DMX addressing also allows the fixture to ignore any DMX information coming from the controller that is not meant specifically for the fixture Because each fixture is connected in a daisy chain fashion it is imperative to assign a proper and unique starting DMX address to each and every fixture The DMX address is non destructive and will remain in the fixture s memory even when the powe
7. scenes either automatically i e with the adjusted Step Time 9 1 3 lt DISP gt Menu Display Settings This function allows the internal programs to run in either stand alone or master salve DMX chain In Alone mode VALU Display the DMX 512 value of each channel This function will electronically display the current DMX value for any channel that is currently being adjusted The display will automatically detail the changing DMX values as they are received from the controller This function is off by default FLIP This function will flip the display readout by a 180 allowing for better visualization when the fixture is mounted in an inverted position D ON The display is designed to turn off during normal operation to avoid excessive light in situations that require an extremely dark environment This function will adjust the time delay the fixture will remain on before it turns off This function is disabled as default LOCK This function allows you to lock the keys With this function you can activate the automatic keylock status If this function is activated the keys will be automatically locked in 15 seconds from the last press In order to deactivate the keylock status press the Mode Esc button for 3 seconds 1 Access the main menu 2 Tap the UP button until DISP is displayed 3 Press ENTER the display will show VALU 4 Tap the UP button until LOCK is displ
8. tuned off lt VER gt Software Version This function will display the current firmware version 9 3 MANL Manual Fixture Settings This function allows the each of the ten DMX channels to be controlled manually This will allow the fixture to be preset to a specific color or built in program without the use of a DMX console Elation Professional Los Angeles Ca 20 www ElationLighting com ELAR DW BRICK TM 9 4 TIME Operating Hours These functions will detail different time functions associated with the fixture lt LIFE gt 0000 9999 Hours This function tracks the running time of the fixture from the point it was last cleared Where XXXX represents the total number of running hours This time is none destructive and will remain in the fixtures memory indefinitely Use this time to track rentals or show durations lt CODE gt Clear run time access code This lock out code prevents the current run time from being erased accidently The access code is 038 lt CLFE gt Clear Fixture Run Time This function resets the run time to zero 9 5 Edit Internal Program Settings The fixture comes equipped with a built in DMX recorder that allows custom programs to be installed and recalled directly from the fixture s control board Programs can be created and stored using the fixture s control board or by using an external DMX controller 9 5 1 Select program This function allows the
9. 25 Intensity LUX 5450 1159 560 2 oooh N i E ei el 17 e a I i s Distance m 17 Diameter m 33 4 Diameter m Elation Professional Los Angeles Ca 30 www ElationLighting com 14 DIMENSIONAL DRAWINGS ELAR DW BRICK TM 178 Nin NTT is ji d oq ig 117 08 Mi UI I PTE Elation Professional Los Angeles Ca 31 www ElationLighting com ELAR DW BRICK TM 15 CHANGE LENS TO GET DIFFERENT BEAM ANGLES Elation Professional Los Angeles Ca 32 www ElationLighting com ELAR DW BRICK TM 16 CIRCUIT SCHEMATIC POWER OUTPUT SUPPLY LJB0060B B0094A LJB0035A JB0035A LJB0035A www ElationLighting com 33 Elation Professional Los Angeles Ca ELAR DW BRICK TM 17 TECHNICAL SPECIFICATIONS Input voltage Power consumption LED Configuration IP Rating Weight DMX Channels Drive Color Mixing Beam Angle Field Angle Dimmer Strobe Lamp Life Dimensions AC 100V 240V 50Hz 60Hz MAX 40W 12 3Watt Units 4 x Cool white 8 x Warm white IP66 4 Kgs 8 8Lbs 5 10 DMX Channel modes Standard DMX 512 3 pole XLR Pin 3 Pin 2 Ground Pin 1 or Standard DMX 512 5 pole XLR n a Pin 5 n a Pin 4 Pin 3 Pin 2 Ground Pin Cool white and Warm white Color Additive Mixing 17 33 4 Continuous Dimming 0 100 Electronic Strobe 0 18 Fps 100 000 Hours Rated Life 350 x 110 x 178 mm 13 8 x 4 3
10. N Congratulations you have just purchased one of the most innovative and reliable LED fixtures on the market today The ELAR DW BRICK M has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the ELAR DW BRICK by Elation Professional Every ELAR DW BRICK has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your fixture for damage and be sure all accessories necessary to operate the fixture have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Inside the box you should find the fixture Two DMX XLR waterproof connection cables One waterproof power cables a safety cable and this manual Please contact customer support at the number listed below if any of the above items are missing CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up h
11. Professionale in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professionale Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published Elation Professional Los Angeles Ca 29 www ElationLighting com ELAR DW BRICK TM 13 PHOTOMETRIC DATA ELAR DW BRICK Photometric Data Beam angle 17 Beam angle 17 Field angle 33 4 of Cool white LEDS LENS25 3 Field angle 33 4 of Warm white LEDS LENS5 25 Intensity LUX 1779 522 244 Intensity LUX 2350 687 326 2 2 gt parta SS _ E 8 El el a al a 17 133 4 17 133 4 o l gt i g E I ER i ZA i m i D I i d SH Distance m Distance m 0 3 0 6 0 9 17 Diameter m 0 3 0 6 0 9 17 Diameter m 0 6 1 2 1 8 33 4 Diameter m 0 6 1 2 1 8 33 4 Diameter m Beam angle 17 Field angle 33 4 of Full LEDS LENS
12. and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as the Elation Opto Branch 4 or DMX Branch 4 EE ek A AE ERA ERRE ENE pa LLL e Z a a E Z d AmE Ts WA T 555 120 Ohms j DMX512 DM X controller Please note to ensure maximal stability when the input voltage is 100 120V only 8 devices may be connected together in this manner From the 9th devices please connect to power supply to get power for the second link when the input voltage is 220 240V only 15 devices may be connected together in this manner From the 16th devi ces please connect to power supply to get power for the second link DMX 512 connection with DMX terminator When longer runs of cable are used you may need to use a terminator on the last fixture to avoid erratic behavior A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a cable terminator Elation part number Z DMX T will decrease the possibilities of erratic behavior Elation Professional Los Angeles Ca 13 www ElationLighting com ELAR DW BRICK TM Termination reduces signal errors and avoids signal transmission problems and interference It is always advisable to conne
13. ayed and tap the ENTER button 5 Press the UP button to select ON to activate this function or OFF to deactivate this function 6 Press ENTER to confirm 7 Press MENU to return to the main menu Elation Professional Los Angeles Ca 19 www ElationLighting com ELAR DW BRICK TM 9 2 SET Fixture Personality Settings These functions set specific running modes and operating parameters lt CHAN gt DMX Mode settings This function allows the fixture to run in different DMX channel modes Two modes are available 5 channel 10 channel See DMX Traits beginning on page 28 for a detailed explanation of the different DMX modes lt FAIL gt DMX Fault Protection This function dictates how the fixture will operate in the event DMX signal is suddenly lost while operating in DMX mode The three fail safe modes are 1 OFF which will blackout all light output 2 HOLD which will hold the last DMX command or 3 AUTO which will put the fixture in sound active mode lt DFSE gt Restore Default This function is used to restore the factory settings of the device All settings will be set back to the default values shaded Any edited scenes will be lost lt POHO gt Power on to preserve the MANL settings This function will preserve all the manual setting that are made in the MANL menu section If this function is not activated all manual settings will be lost once the fixture is
14. ct a DMX terminal Resistance 120 Ohm 1 4 W between PIN 2 DMX PN3 and PIN 3 DMX of the last fixture PIN 2 1200 ON 2 1 5 Pin XLR DMX Connectors Some manufactures use 5 pin XLR connectors for DATA transmission in place of 3 pin 5 pin XLR fixtures may be implemented in a 3 pin XLR DMX line When inserting standard 5 pin XLR connectors in to a 3 pin line a cable adaptor must be used these adaptors are readily available at most electric stores The chart on the next page details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion 3 Pin XLR Female Out 5 Pin XLR Male In Understanding Fixture DMX addressing All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by combining various dipswitches located on the rear of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all you fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each
15. e expected effect for this channel 7 Press ENTER to enter the editing of the other channels of the scene 8 Repeat steps 5 8 until you finish setting all the DMX values for all the channels of this scene each scene can have 16 channels maximum Once all the channels are completed the display will begin to flash TIME this indicates the time needed to run this scene 10 Press ENTER to edit the time needed the display shows TXXX XXX represents the time needed to run this scene For example T002 means scene 1 needs 0 4 seconds to run T 15 means this scene needs 3 0 seconds to run Note XX is always 0 2 seconds not one second 11 Adjust the time needed by tapping the UP button 12 Press ENTER to save the settings for the scene you are editing the display will change to the next scene automatically 13 Repeat steps 3 12 to edit other scenes you can edit and save 48 scenes maximum Elation Professional Los Angeles Ca 22 www ElationLighting com ELAR DW BRICK TM 14 Press MODE ESC to exit and save your edited scene into the fixtures internal memory The number of steps can be defined under EDIT and the scenes can be called up under Run To run the scenes see page 30 Editing procedure 2 Using an external controller 1 S A Db YA Set D 10 11 12 Call up the first scene in your controller now Select SC01 by pressing the UP or DOWN butto
16. elp and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professionale Service Hours are Monday through Friday 9 00 a m to 5 00 p m Pacific Standard Time Voice 323 582 3322 Fax 323 582 3108 E mail support elationlighting com Forum www ElationLighting com forum Warning To prevent or reduce the risk of electrical shock or fire do not expose this unit to Elation Professional Los Angeles Ca 2 www ElationLighting com ELAR DW BRICK TM rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself Doing so will void your manufactures warranty Please do not discard the shipping carton in the trash Please recycle whenever possible WARRANTY REGISTRATION The ELAR DW BRICK carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must prov
17. f the product if the product has been repaired or serviced by anyone other than the Elation Professionale factory unless prior written authorization was issued to purchaser by Elation Professionale if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Professionale will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professionale under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professionale All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that Elation Professional Los Angeles Ca 28 www ElationLighting com ELAR DW BRICK TM effect E Elation Professionale reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation
18. factures warranty and may Increase the risk of damage and or personal injury To reduce the risk of fire or shock do not expose this fixture to rain or moisture Do not attempt to operate this fixture if the power cord has become damaged or frayed Never open this fixture while in use 10 This device falls under protection class Therefore it is essential that the device be grounded properly 11 All electrical connections must performed by qualified personal 12 Be sure the available voltage matches the voltage requirements of the unit Be sure the power cord is never crimped or damaged If the power cord is damaged Elation Professional Los Angeles Ca 4 www ElationLighting com ELAR DW BRICK TM replace it immediately with a new one of similar power rating 13 Always disconnect from main power before performing any type of service or any cleaning procedure 14 Only handle the power cord by the plug Never pull out the plug by tugging the wire portion of the cord 15 If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard 16 Please be aware that damages caused by modifications to the device are not subject to warranty Important Notice Damages resulting from the disregard of safety and general user Instructions found in this user manual are not subject to any war
19. fixture to a different DMK address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each Elation Professional Los Angeles Ca 14 www ElationLighting com ELAR DW BRICK TM fixture That means changing the settings of one channel will only affect the selected fixture In the case of the ELAR DW BRICK which is a 5 channel fixture default you should set the starting DMX address of the first unit to 1 the second unit to 6 5 1 the third unit to 11 6 5 and so on Note During start up the ELAR DW BRICK will automatically detect whether a DMX data signal is being received or not lf a DMX data signal is being received the display will show A XXX XXX representing the actual DMX address If the fixture is not receiving a DMX signal the display will flash A XXX XXX representing the actual DMX address If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following The 3 pin or 5 pin XLR plug cable with DMX signal from controller may not be connected or is not inserted completely into the DMX input jack The DMX controller is switched off or defective The DMX cable from the controller merging with included IP Rated Cable adapter is not connected securely The DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in
20. ician before attempting any operation Clamp Mounting The ELAR DW BRICK provides a unique mounting bracket assembly that allows the unit to stand on flat surface hang on truss via a clamp or be used in cluster allow multiple units to rigged together see the illustration below Regardless of the mounting option you choose please refer to the safety guidelines in this manual to avoid damage to the unit and or injury to persons When mounting this fixture to truss be sure to secure an appropriately rated clamp to the hanging yoke using a M10 screw fitted through the center hole of the hanging yoke As an added safety measure be sure to attach at least one properly rated safety cable to the fixture See illustration below Elation Professional Los Angeles Ca 11 www ElationLighting com ELAR DW BRICK TM Securing the ELAR DW BRICK Always secure your fixture with a safety cable when suspend ing the unit from truss or other means The fixture provides a built in rigging point for a safety cable as illustrated above Be sure to only use the designated rigging point for a safety cable Never secure a safety cable to the hanging bracket 7 UNDERSTANDING DMX Data Cable DMX Cable Requirements For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3 pin XLR connector for data input and data output see figure below Be sure to only use properly rated DMX cables for DMX operat
21. ide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customers expense You may obtain a R A number by contacting customer support at 823 582 3322 Elation Professional Los Angeles Ca 3 www ElationLighting com ELAR DW BRICK TM 2 SAFETY INSTRUCTIONS To guarantee proper and consistent operation it is important to follow the guidelines in this manual Elation Professional will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this 9 manual Always be sure that the fan and the air inlets remain clean and are never blocked Allow about 6 15cm between this fixture and other devices or a wall to allow for proper cooling Never touch the fixture during normal operation Never look directly into the lamp beam You risk injury to your retina which may induce blindness For safe operation follow the Installation guide described in chapter two of this manual Operating the ELAR DW BRICK M without suited safety aids such as safety cables or clamps can increase the risk of damage and or personal injury Installation should only be performed by qualified and certified personal When mounting this fixture use only the original rigging points included with this fixture Any structural modification will void the original manu
22. ion and not standrd audio cables If you are constructing your own cables be sure to use two conductor shielded digital cable rated at a 120 ohms this cable can be purchased at almost all professional sound and lighting stores Your cables should be made with a male and female 3 pin XLR connector on either end of the cable DMX512 OUT 3 PIN XLR Please note This is not the same as audio microphone cable Audio cable has a COMMON DMX512 IN 3 PIN XLR different resistance rating Be sure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR s outer casing Grounding the shield could cause a short circuit and erratic behavior DMX output DMX input XLR mounting sockat XLR mounting sockat 1 Ground 1 Ground 2 Signal 2 Signal 3 Signal 3 Signal Elation Professional Los Angeles Ca 12 www ElationLighting com ELAR DW BRICK TM DMX 512 control connection Connect the provided DMX XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the moving head Please refer to the diagram below You can chain multiple moving heads together through serial linking The cable needed should be two conductor shielded cable with XLR input and output connectors Always be sure daisy chain your in
23. ns Press MODE ESC the display shows SCO Press MODE ESC the display shows C 01 Select CEDT by pressing the UP or DOWN buttons Press MODE ESC the display shows OFF Press UP the display will read ON Press MODE ESC the display shows SC02 You successfully downloaded the first scene Adjust the Step time as described above Call up the second scene in your controller now Repeat steps 5 11 until all desired scenes are downloaded Press MODE ESC to exit The number of steps can be defined under STEP and the scenes can be called up under RUN Elation Professional Los Angeles Ca 23 www ElationLighting com ELAR DW BRICK TM 10 DMX CHANNEL TRAITS DMX Operation Notes The fixture will function in DMX mode whenever the unit is receiving a DMX signal Please note that this will override all manual settings regardless of dipswitch positions This unit will keep and retain the last DMX command in the event of DMX signal failure DMX CHANNEL TRAITS The charts below outline the different DMX traits for the 2 different DMX modes 5 Channel mode In this mode channel 1 controls all the cool white LEDs channel 2 controls all the warm white LEDs channel 3 controls the color_temperature channel 4 controls the strobe and channels 5 controls the dimming CHANNEL 1 Cool white CHANNEL 2 Warm white CHANNEL 3 Color_temperature CHANNEL 4 Strobe CHANNEL 5 Dimming 5 Channel Mode This cha
24. r to the unit is switched off Memory is backed up and retain by an internal power source that should last about five years VALU Display the DMX 512 value of each channel With this function you can display the DMX 512 value of each channel The display will automatically detail the changing DMX values as they are received from the controller SLAV Slave setting for Master Slave Operation With this function you can define the device as slave for operation in Master Slave mode Each slave setting will have a different function for a dynamic lightshow without a controller RDMX Address via DMX This function allows the DMX address to remotely be adjusted from a DMX console This setting requires special settings for both the controller and the fixture RDMX is on by default 9 1 2 lt RUN gt Internal Program Settings This function allows the internal programs to run in either stand alone or master salve mode In Master mode the fixture will send DMX data to other fixtures connect via the DMX chain In Alone mode the fixture will operate as a single fixture The program for this mode is selected in the Select program section of the control menu You can set Elation Professional Los Angeles Ca 18 www ElationLighting com ELAR DW BRICK TM the number of steps under Edit program You can edit the individual scenes under Edit scenes With this function you can run the individual
25. ranty claims CAUTION N ever touch the device during operation The housing may heat up CAUTION N ever look directly into the light source as sensitive persons may suffer an epileptic shock Elation Professional Los Angeles Ca 5 www ElationLighting com ELAR DW BRICK TM FEATURES Low power consumption e Minimal heat emission e Maintenance free operation e Equipped with 12 three watt LEDS 4 cool white 8 warm white e 100 000 hours rated LED life Seamless white and warm color changing e USITT DMX 512 complaint 5 pin and 3 pin Male and Female XLR Data Connectors Preprogrammed colored macros Strobe effect with a maximum flash rate of 18fps e DMXc controlled operation or stand alone operation with Master Slave function e Individual control over each LED e Electronic Switching power supply AC 100V 240V 50 Hz 60Hz e Two DMX Modes 5 DMX channels 10 DMX channels e Flicker free operation for television and film e Compact design fits in 12 box truss e Brilliant light output e Linkable power supply in and out power connectors up to 8 units e Firmware upgradeable via Elation E Loader Elation Professional Los Angeles Ca 6 www ElationLighting com ELAR DW BRICK TM 4 GENERAL GUIDELINES This fixture is a professional lighting effect designed for use on stage in nightclubs in theatres and other types of architectural installations Do not attempt operation or installation wi
26. rt details a simple layout of the DMX channel assignment in DMX channel s functions and their values 5 Channel Mode Channel 1 Cool White 0 255 Cool White O Black 255 100 Channel 2 Warm White 0 255 Warm White 0 Black 255 100 Channel 3 Color_temperature Color_temperature 3200K Color_temperature 4300K Elation Professional Los Angeles Ca 24 www ElationLighting com ELAR DW BRICK TM SS Channel 4 Strobe E 96 127 128 169 160 191 No function shutter open 192 293 Random strobe effect slow to fast 094 255 No function shutter open Channel 5 dimming 0 255 Dimming 0 Black 255 100 10 Channel Mode This chart details a simple layout of the DMX channel assignment in CHANNEL 1 Cool white CHANNEL 2 Warm white CHANNEL 3 Cool white CHANNEL 4 Warm white CHANNEL 5 Cool white CHANNEL 6 Warm white CHANNEL 7 Cool white CHANNEL 8 Warm white CHANNEL 9 Strobe CHANNEL 10 Dimmer Speed DMX channel s functions and their values 10 Channel Mode Channel 1 Cool White 0 255 Cool White group1 Channel 2 Warm White 0 255 Warm White group1 Channel 3 Cool White Elation Professional Los Angeles Ca 25 www ElationLighting com ELAR DW BRICK TM 0 255 Cool White group2 Channel 4 Warm White 0 255 Warm White group2 Channel 5 Cool White 0 255 Cool White group3 Channel 6 Warm White 0 255 Warm White group3 Channel 7 Cool White
27. thout a proper knowledge on how to do so This fixture was designed for indoor use only use of this fixture outside will void the manufacture s warranty Consistent operational breaks will ensure that the fixture will function properly for many years to come Do not shake the fixture around Avoid brute force when installing or operating the fixture While choosing an installation location please be sure that the fixture will not be exposed to extreme heat moisture or dust The minimum distance between the fixture and a wall or flat surface should be at least 5 meter about 1 5ft Always install the fixture with an appropriately rated safety cable When installing the fixture in a suspended environment always be sure to use mounting hardware no less than M10 x 25 mm also be sure the hardware is only inserted in the yoke s mounting holes Do not attempt to operate this fixture until you have familiarized yourself with all of its functions Do not permit operation by persons not qualified for operating this type of theatrical fixture Most damages are the result of improper operation Please use the original packaging to transport the fixture in for service For your own safety please read this user manual carefully before installing the device Elation Professional Los Angeles Ca 7 www ElationLighting com ELAR DW BRICK TM 5 FIXTURE OVERVIEW Ce SE 1 LED Assembly Cool white warm white LED assembly 3 wa
28. tt LEDS 2 Bracket Locking Knob This knob is used to secure the bracket in place after angle adjustments have been made 3 LED Housing This part include all hardware 4 DMX Input Jack This jack accepts an incoming DMX signal via a male 3 pin or a 5 pin XLR jack Elation Professional Los Angeles Ca 8 www ElationLighting com 10 11 12 ELAR DW BRICK TM DMX Output Jack This jack is used to send an incoming DMX signal to the next fixture in the DMX chain via a female 3 pin or a 5 pin XLR jack Main Power Input Lead This lead is the main power input lead When the unit is the first in a chain or the only fixture to be used be sure to use the power starter cable that converts a standard Edison 3 prong to the IP rated twist lock connector When jumping from fixture to fixture be sure to only use Elation IP rated power connectors to maintain the IP rating Power Output Jack Use this jack to jump power to another ELAR DW BRICK MENU BUTTON This button is used to access and exit the fixture s on board menu system UP BUTTON This button is used to scroll forward when navigating through the fixture s menu system DOWN BUTTON This button is used to scroll backwards when navigating through the fikture s menu system ENTER BUTTON This button is used to select and confirm a menu function LED MENU DISPLAY Four segment LED menu display details all menu functions Elation Professional Los
29. user to select one of ten of the user defined built in programs This program is then accessed in Function Mode under Program Run 9 5 2 REC Auto save function 9 5 3 Edit program This function allows the user to edit the built in programs 9 5 4 Edit Scenes This function allows the user to edit or define the actual scenes that are stored in the user defined built in programs that are accessed in the previous step Elation Professional Los Angeles Ca 21 www ElationLighting com ELAR DW BRICK TM 9 5 5 CEDT Edit program using a external controller Editing procedure 1 Using the control board only 1 2 3 Access the main menu Tap the UP button until EDIT is displayed and press ENTER The display will show SC 01 this stands for the scene number For example SC 01 is displayed it means you will be editing scene 1 press ENTER You can change the scene number by tapping the UP button Press ENTER the display will show C 01 this represents the channel number lf C 01 is displayed you will be editing the fixture s channel 1 value of the selected scene press ENTER You can change the channel number by tapping the UP button The display will show the DMX value for the channel that is being edited It will be displayed as 11XX it stands for Channel 11 of the editing scene the DMX value is XX Adjust the DMX value by tapping the UP button until you get th
30. your DMX chain Elation Professional Los Angeles Ca 15 www ElationLighting com ELAR DW BRICK TM 8 DISPLAY LED INDICATOR The ELAR 108PAR RGBW has a LED indicator on the display This indicator is designed to give a quick visual indication of the fiktures DMX status The illustration below details the functionality of the LED indicators DMX OK NO DMX The LED indicator represents DMX signal e Ifthe indicators is on a clean DMX signal is present e Ifthe indicator is off there is no DMX signal present Elation Professional Los Angeles Ca 16 www ElationLighting com 9 DISPLAY MENU Default settings shaded VALU SLAV RDMX AUTO VALU FLIP D ON LOCK 5CH 10CH OFF HOLD AUTO ON OFF ON OFF V 1 0 V 9 9 C XXX 000 255 W XXX 000 255 T XXX 000 255 S XXX 000 255 D XXX 000 255 0000 9999 hours CXXX ON OFF S 01 S 48 RE XX COOL WARM TEMP STRB DIMM FADE TIME CEDT Remarks ELAR DW BRICK TM ANN AXXX Setas Slave Change address via DMX Run Auto program Display DMX value Flip display Delay shutting off LED display XX D DO DXXX T H o OD lt Yn O 6 A y OD lt m Z C O E E O 5 O FS LA o 00 020015 z 225228 S Geox SS TI TI T T Ti mm Tn n m gt LO seconds to activate DMX channel Mode Status while there is no DMX Default setting Preserves manual setting after power has been turned off
Download Pdf Manuals
Related Search