USER`s MANUAL - TDesigner Online
Contents
1. E RANGE iRobotics has four different range operations By default it has the FULL RANGE massage First press it goes to UPPER BODY massage Second press it goes to SPOT massage and third press it goes to LOWER BODY massage he sequence will repeat F COMBO Initial press starts with both kneading amp tapping with full range of body function The second press turns off both the kneading 8 tapping G TAPPING Initial press starts Tapping with full range of body function The second press turns off the Tapping H WIDTH This function is active only when Tapping is turned ON This adjusts the width of the rolling system for each press I SPEED This function is active only when the system is either in COMBINATION mode or TAPPING mode It has five different speed profiles for taoping and each press of this button the profile changes in sequence J CALF Turns ON OFF Calf Massage HEIGHT Foot Massage height adjustment This UP button manually moves the roller system from bottom to top As soon as the UP button is released the roller system stops at desired position L This DOWN button manually moves the roller system from top to bottom As soon as the DOWN button is released the roller system stops at desired position M SEAT This button manually moves the seat forward or backward As soon as this button is released the seat stops at desired position N FEET Turns ON OFF Foot Massage O RECLINE This button manually reclines UP DOWN2. lt gt iRobotics Advanced Features with High Reliability For household and commercial use PLEASE READ AND SAVE THESE IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Please Save these Instructions When using an electrical appliance basic precautions should always be followed including the following Read all instructions before using this massage chair DAN G E R To reduce the risk of electric shock 1 Always unplug the power cord from the electrical outlet immediately after use and before cleaning WAR N N G To reduce the risk of burns fire electric shock or injury to persons l 2 14 15 16 17 18 The main power switch is marked with international symbols O and I The switch in position I means that system is turned on and The switch in position O means that system is off An appliance should never be left unattended when plugged in Unplug from outlet when not in use and before putting on or taking off parts Close supervision is necessary when this appliance is used by on or near children invalids or disabled persons Keep children away from extended foot support or other similar parts Use this appliance only for its intended use as described in this manual Do not use attachments not recommended by the manufacturer Never operate this appliance if it has a damaged cord or plug if it is not working properly if it has been dropped or da
3. the seat position up As soon as this button is released the seat reclining stops at desired position P When holding FF KEY Hold Mode during play or pause the master starts fast forward playing the file When FF KEY release is detected the master return to normal playing When pressing and releasing FF KEY push release Mode during play or pause the master searches the nextAAC WMA MP3 file in the order of sort of files being played or paused Q When pressing PLAY PAUSE key during play the master stops playing the MP3 file temporarily When receiving PLAY PAUSE key again the master continues to play the file R When holding FB KEY Hold Mode during play or pause the master starts reverse playing the file When FB KEY release is detected the master return to normal playing When pressing and releasing FB KEY push release Mode during play or pause the master searches the nextAAC WMA MP3 file in the order of sort of files being played or paused S Pressing VOL key decreases the volume of the song being played T Pressing VOL key increases the volume of the song being played Massage profile and description Massage Modes Rolling Massage Four circular rollers move up amp down in rhythmic fashion from neck to lower back It feels like a massage therapist firmly moves the hand as shown in figure 4 Kneading The roller moves in circular motion on both sides of the spine which feels like pressi
4. ame Bottom Dimensions Chair Base Frame Side View and Dimensions 10 Massage Chair Overall Dimensions Figure 10 Massage Chair Dimensions WARRANTY INFORMATION One 1 YEAR LIMITED WARRANTY 1 This Warranty applies only to the original purchaser of this product 2 This Warranty applies ONLY to repair or replacement of any supplied or manufactured parts of this product The warranty does not cover normal wear coating dropped or abused unit 3 Unless otherwise proscribed by law The LURACO technologies Inc shall not be liable for any personal injury property or any incidental or consequential damages of any kind resulting from malfunctions defects misuse improper installation or alteration of this product Important Service Instructions If you need to send a unit to us for repair please follow the steps below 1 Carefully pack the item in its original carton or other suitable box to avoid damage in shipping 2 Before packing your unit be sure to enclose e Your name with full shipping address and telephone number e A dated receipt for PROOF OF PURCHASE e Attach documentation detailing the problem you are having with your device 11 LURACO THANK YOU FOR BUYING LURACO TECHNOLOGIES PRODUCTS LURACO TECHNOLOGIES INC 1132 107 STREET ARLINGTON TX 76011 USA TEL 1 817 633 1080 FAX 1 817 633 1085 WWW LURACO COM
5. maged or dropped into water Return the appliance to a service center for examination and repair Keep the cord away from heated surfaces Do not use outdoors Do not operate where aerosol spray products are being used or where oxygen is being administered To disconnect turn all controls to the off position then remove plug from outlet Connect this appliance to a properly grounded outlet only See Grounding Instructions Do not remove the back cushion and do not play with roller mechanism Do not remove the bottom seat and do not play with actuators Keep the cord out of heavy traffic area To avoid fire hazard NEVER put the cord under rugs near heat generating devices Always check the volume before using the headphone Do not operate any equipment with a damaged parts Any other use not recommended by the manufacturer may cause electrical shock or injury to persons Do not touch or re wire the wires connected to the master box Do not attempt to repair or adjust any electrical or mechanical functions on this unit Doing so will void the warranty After reading this owner s guide if you have any questions or comments please call 1 817 633 1080 or contact our technical support department at support luraco com or visit our website at www luraco com for more information FEATURES OPERATIONS iRobotics Outstanding Features The Ultimate Message Chair Extreme Luxury combined with High Tech Innovation Ad
6. ng with the thumb in circular motion like figure 1 Tapping The roller makes alternate strokes along the spinal cord which feels like Tapping the muscles with the hand in alternate fashion as shown in figure 2 Combination Combination of both Kneading and Tapping is shown in Figure 3 1 Kneading Massage 3 Kneading amp Tapping 2 Tapping Massage 4 Rolling Massage Figure 7 Depiction of different massage modes iRobotics Specifications Maximum user weight 300lbs Full Length Travel of Auto programs 2 Remote control power cord Accessories laptop tray optional Automatic Timer Shut Off 10 Minutes Trouble Shooting Self Diagnostics The massage chair electronics is in state of art technology which supports self diagnostics feature to detect the individual failure of each electrical component in the massage chair The Masterbox has 3 different LED indications which show the user to narrow down the failure if any From the figure 8 shown below the user can find the LED location in the Masterbox Masterbox Power lee eee Red LED Indication Blinks or motor failure Green LED is normal zg continuous Remote control failure Yellow LED will turn on Figure 8 Failure Indications Maintenance Instructions This production does not require any lubrication for the mechanical parts in the system Use only leather care products for cleaning and maintaining the leather Massage Chair Dimensions Chair Fr
7. oks like the adapter illustrated in sketches B and C may be used to connect this plug to a 2 pole receptacle as shown in sketch B if a properly grounded outlet is not available The temporary adapter should be used only until a properly grounded outlet sketch A can be installed by a qualified electrician The green colored rigid ear lug or the like extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover Whenever the adapter is used it must be held in place by a metal screw 2 This product is for use on a nominal 120 V circuit and has a grounding plug that looks like the plug illustrated in sketch A in the Figure below Make sure that the product is connected to an outlet having the same configuration as the plug No adapter should be used with this product GROUNDED rhel OUTLET ADAPTER ME TAL SCRE w GROUNDED A DLUTLET BON b GROUNDING TAB FOR _ PIN LA cB GROUNDING screw O AAC UO GROUNDING INSTRUCTION iRobotics Installation Instruction Determine the surface of the base that you want to install the iRobotics ensure that the surface is flat Locate a position to drill the holes with the dimensions as shown in Fig 1 Lift the chair back rests on the chair seat Lock the chair back into actuator lock as shown in Fig 2 Lift the seat base to see the four holes on the massage chair base Place the chair base to match the four drills made on the ba
8. se Install the screws and nuts to secure the chair frame to the base Use a Hex key wrench to tighten the four screws Plug the power cord into the Masterbox Place the pillow and plug the head phone as shown in figure 4 os eS Ms Screw Drill diameter 10 mm Release plate for releasing the lock 3 5mm Stereo jack Figure 3 Location of Headphone Jack Step 1 Insert two washers and one Step 4 Install the clamps Please nut as shown below insert a regular nut before wing nut Step 2 Use the wrench to tighten Step 5 Insert mini laptop and tie the the nut clamps Step 3 Install the holder by two Step 6 An overall view The clamp can screws as shown below be re located to avoid the plugs Figure 4 Laptop Holder Installation Remote Control DEEP TISSUE dh comeGE DO GOSC O OGO BW OOE Figure 5 Remote Control Button Layout Remote Control Instructions and Button Description A POWER STOP Turn ON OFF the massage system After each 8 minute session the power turns off automatically SWEDISH is a continues 8 minutes consisting of combination functions including Soft Kneading Soft Tapping and Up Down functions DEEP TISSUE is a continues 8 minutes consisting of combination functions including Harder Kneading Harder Tapping and Up Down functions KNEADING Initial press starts kneading with full range of body function The second press turns off the kneading
9. vanced full function massage system design Ultra soft leather nests you in comfort Integrated MP3 player Flashcard reader with built in speakers or headset options Supports several music file formats Ultra clean sound with full audio frequency band Stylish modern design High reliability Light weight Self diagnostics with LED system status reporter Innovative laptop holder optional Researched Developed and Manufactured in U S A GROUNDING INSTRUCTIONS This product must be grounded If it should malfunction or breakdown grounding provides a path of least resistance for electric current to reduce the risk of electric shock This product is equipped with a cord having an equipment grounding conductor and a grounding plug The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances DANGER Improper connection of the equipment grounding conductor can result in a risk of electric shock Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded Do not modify the plug provided with the product if it will not fit the outlet have a proper outlet installed by a qualified electrician Followed by either instruction 1 or 2 below 1 This product is for use on a nominal 120 V circuit and has a grounding plug that looks like the plug illustrated in sketch A in the Figure below A temporary adapter that lo
Download Pdf Manuals
Related Search