Home

BW FM 200 K User Manual

1. lt Z lt op pS ea Z fe Standard Features The system has the following standard features e 1 3 button LCD display remote control Status indicator LED Program Valet switch Remote Start capabilities Extended Range Transceiver Valet mode Active arming Stop amp Go Feature Auto Cold Start Remote keyless entry Door lock unlock Hood protection Doggie Door release e Window roll down Note Some features may not be appropriate for certain vehicles Automatic transmission and electronic fuel injection are required on vehicles for use with this system K9 SECURITY REMOTE START SYSTEM Security System Operation ARMING OPERATION To arm the system press transmitter button e The siren will chirp once e The parking lights will flash once The doors will lock The L E D will turn solid for 2 seconds then start flashing slowly After 10 seconds the system is armed if Installed CURT AVES DISARMING OPERATION To disarm the system press transmitter button I e The siren will chirp twice e The parking lights will flash twice CREI e The doors will unlock e The optional illuminated entry feature will turn on the dome light for 30 seconds In the event the alarm was triggered while away the system will respond with 3 chirps and 3 parking light flashes To enter the Valet Mode Be sure the system is disarmed 2 Turn the ignition key on 3 Press
2. and hold the valet service mode switch for 3 seconds e The LED will turn on solid indicating the system is in Valet Mode To exit Valet Mode Turn the ignition key on 2 Press and hold the valet service mode switch for 3 seconds The LED will turn off e The Siren will chirp 2 times EMERGENCY OVERRIDE If the transmitter becomes lost or fails to operate the system can be disarmed by using the emergency override feature To override the system Enter the vehicle e Because the system is armed the siren will sound 2 Turn on the ignition key 3 Press the Valet Service Mode switch The siren will stop sounding TRUNK RELEASE OED EZ Press button 3 for approx imately 2 seconds to open the trunk IN Remote Start Operation Important The system should be placed into the valet mode when parked inside a garage or being left for service Only start the vehicle in a well ventilated area Do not use in a closed garage or indoors Be sure to familiarize yourself with all features prior to using this product REMOTE STARTING THE VEHICLE To remote start the vehicle Press button 2 on the transmitter e The siren chirps 3 times e The parking lights turn on e Approximately 2 seconds later the system will attempt to start the vehicle Once the car has started the heater or air conditioner will turn on and run for the preprogrammed time 15 or 25 minutes If the engine fails to start on the f
3. he engine will start and run for thirty seconds to indicate the Cold Start feature is engaged Disengaging the Auto Cold Start feature The Auto Cold Start feature can be deactivated in one of three ways e Press the brake pedal e Turn on the ignition e Remote start the vehicle using the transmitter STOP AND GO The Stop and Go feature allows the vehicle to remain running without use of the ignition key during short stops Iw To activate the Stop and Go feature l Press and hold the brake pedal 2 While pressing the brake pedal push transmitter button e The LED will flash rapidly e The parking lights will flash four times 3 Release the brake pedal 4 Remove the key from the ignition switch 5 Exit the vehicle and lock the doors manually or using transmitter button To resume driver control Unlock the doors manually or by press ing transmitter button I 2 Turn on the ignition 3 Press the brake pedal e The vehicle resumes driver control e The LED will turn off if optional keyless entry feature is installed SAFETY FEATURES The system will not start the vehicle if the brake pedal is pressed or the hood is open Also if the brake is pressed or the hood is opened while remote running the remote start will shut down REPLACING LOST OR STOLEN REMOTE TRANSMITTERS The system can learn a maximum of 2 LCD transmitters To add a transmitter or replace lost stolen transmitters please consul
4. irst attempt it will repeat the starting procedure 2 more times If the vehicle fails to start after a total of 3 times the siren will chirp 4 times Press Driving vehicle after Remote Starting Unlock the door by pressing button on the remote transmitter Enter vehicle turn ignition key to the on position Note Do not turn the key all the way to the start position as you may damage the starter Once the ignition key is turned to the on position press the brake pedal and shift the car into the proper gear and you may now drive the vehicle Note If brake pedal is pressed prior to turning on ignition engine will turn off REMOTE ENGINE SHUTDOWN If the vehicle has been remotely started and you desire to turn the vehicle off simply press button 2 on the remote transmitter After the motor has turned off the doors will relock optional AUTO COLD START Cold start feature allows the remote starter to start and run the vehicle every one or two hours selectable by your installer for a period of 24 hours This allows the engine to remain at an operational temperature in extremely cold weather Auto Cold Start must be enabled during installation or it cannot be engaged Engaging the Auto Cold Start feature To turn Auto Cold Start on While holding the brake pedal down push the program switch and transmitter button 2 for two seconds e The parking lights will flash three times e The siren will chirp three times e T
5. ons that appear on the transmitter trink operation are reserved for future use and have no functions P i at this time DLC U S A 12753 Moore Street Cerritos California 90703 David Levy Company Inc K9SECURITY Rev 07 01
6. t with an authorized dealer K9 SECURITY REMOTE START SYSTEM Transmitter Operation Button Operation I ARM DISARM PANIC Button To arm or disarm the system press button To activate the panic feature press button and hold for three seconds Il START Button To start the vehicle press and hold button 2 for two seconds To shut down the vehicle press button 2 and hold for two seconds Il Doggie Door To activate the trunk output press button 3 Il I STATUS CHECK To check current status of the system press buttons 2 and 3 together The current status of the system will be displayed on the transmitter Transmitter Confirmation Indications Arm The display will flash the A icon and the animated icon to confirm arming Start The display will show the O icon and the O icon to indicate the ignition is turned on and the engine is going to crank When the engine starts and continues to run the O m icon will be displayed the exhaust Disarm icon will flash and the icon The display will flash the DSi will rotate icon and the animated ss to confirm disarming If the Door If a door is opened while the system is armed the icon will be displayed the doorframe will animate and the icon will be displayed alarm was triggered while away the icon will be displayed Doggie Door The display will flash the icon opening to confirm Note Some ic

BW FM 200 K User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents