Home

BILANCIAI

1. The explanations given in par 2 1 on page A 7 about printing the size of the archive unused weight recovery and so forth are also valid for RCD Plate mode In this case however the relevant key is PLATE and not RCD A 12 D410 D410 3 Preset weight options The preset weight options are used when the first weight or tare of a vehicle is known and therefore does not need to be weighed The preset weights are associated with a code that can be used to recall them Besides the preset weight each code can also store auxiliary information such as the product code or the client code Remember that such data can also be entered afterwards on to the print out by using the PROCOD and CLIENT keys In this case however the information is not memorised together with the code and is valid only for a single operation The recognition code used during these procedures can be a data recall code RPD of up to 4 figures or the vehicle licence plate code RPD Plate of up to 10 alphanumerical characters decided during the installation phase 3 1 How to make the list of preset weights As indicated previously the preset weights can be associated with an RPD or RPD Plate code The list of preset weights is made in the following way Carry out the following operations Y press RPD or PPLATE v enter the desired code v enter the weight to be memorised v enter the product code v enter the client code v press ESC to quit Y
2. Y press COD N to check how many RCD codes the archive contains Remember that the archive contains RCD codes for which only the entry weighing procedure has been carried out v to print out the list of RCD codes and their relative details press SUMMAR and set the number of codes required It is possible to individually cancel or zero any unused RCD code when it will be impossible to take any future readings by pressing the DELCOD key It is advisable to regularly check the number of unused RCD codes and cancel any unnecessary elements individually using the RCD list D410 2 2 Entry Exit operations using Licence Plate Data Recall The RCD Plate code is made up of as maximum of 10 alphanumerical characters which the operator enters manually and which must be set before each entry weighing operation Refer to par 2 1 1 on page A 7 and par 2 1 2 on page A 9 for the entry exit procedure In this case the reference key is not RCD but PLATE Remember that in the case of RCD Plate information about the first weighing is associated with the licence plate of the vehicle on entry The card need not be printed in since the first weighing data can be recalled by setting the vehicle licence plate again when this reaches the exit The procedure can be configured in both modes during the installation phase Y with data print out Y with data memorising The selected mode will appear on the display when the machine is powered W wArninG W
3. necessarily have to be consecutive The difference between the entry and exit weights can be calculated at the time of the second weighing 2 1 1 Entry weighing procedures For each entry print out the terminal allocates and prints out a code the RCD code If this is entered before the second weighing the data from the first weighing weight product code client code and the vehicle licence plate are retrieved To obtain a print out of the entry weight or first weight v enter the required auxiliary data product code client code and vehicle licence plate if such data need to be recorded You are advised to use the rapid keys PROCOD CLIENT and PLATE and refer to the Use of the Terminal chapter of the user manual to enter the numerical and alphanumerical data A 7 D410 Otherwise use these paths gt MENU gt Data Management gt Code Management gt Product Code gt MENU gt Data Management gt Code Management gt Client Code gt MENU gt Data Management gt Code Management gt Plates v make sure that the printer is connected switched on and the paper has been loaded Y press key to print out the first weight Printing will take place only if v the weight stabilises within 10 seconds Y the weight is not negative or over the maximum weight capacity The data printed out are v date v time Y a consecutive number v a product code with details Y a client code with its details Y licence plate Y RCD code
4. with a vehicle licence plate up to 10 characters for entry exit operations where the licence plate is entered before each weighing operation RCD Plate Y without data recall codes for entry exit operations where the entry weight is entered before each exit weighing operation Preset weight operations can be done with v data recall of 4 numbers for preset weight operations RPD v data recall with a vehicle licence plate up to 10 characters for preset weight operations RPD Plate A 6 D410 D410 2 Entry Exit functions Entry Exit Functions require two weighing operations Y an entry weighing when the weight of the means of transport is taken as first weight and together with auxiliary data such as product code client code and vehicle licence plate is given a recognition code Y an exit weighing when having retrieved the first weight and any auxiliary data using the recognition code the weight of the vehicle is recorded as the second weight and then the difference between the two is calculated to give the net weight The recognition code used during these procedures can be a data recall code RCD 4 figures or a vehicle licence plate code RCD Plate with 10 characters The two types of code are for two different methods of carrying out entry weighing 2 1 Entry Exit Functions with Data Recall This type of procedure is enabled during the installation phase The two weighing phases for entry and exit do not
5. SOCIETA COOPERATIVA BILANCIAI Double weighing Ce Appendix to use manual Code 813711 a EDITION 30 May 2001 D410 Index 12 INTRODUCTION Sa yes es te ae a ne ee Ns A 5 1 1 Double Weighing procedures iii A 5 2 ENTRY EXIT FUNCTIONS ccoo ems A 7 2 1 Entry Exit Functions with Data Recall A 7 2 1 1 Entry weighing procedures nociones A 7 2 1 2 Exit weighing procedures ic ca A 9 2 1 3 Unused ROD code recovery ii ec A 10 2 2 Entry Exit operations using Licence Plate Data Recall 11111111011111 A 11 3 PRESET WEIGHT OPTIONS uses A 13 3 1 How to make the list of preset weights seis A 13 3 2 Weighing procedures with preset weights eee A 14 4 OPTIONS FOR ENTERING THE FIRST WEIGHT MANUALLY nennen A 15 5 TOTAL MANAGEMENT cc ec A 17 A 3 A 4 D410 D410 1 INTRODUCTION W WARNING This appendix relates only to the options needed for Double Weighing procedures 1 1 Double weighing procedures DOUBLE WEIGHING options are most commonly used for weighing means of transport which are weighed prior to loading entry weighing and then again after loading exit weighing to determine the quantity of goods that are being transported Double weighing options can be done with Y entry exit operations Y preset weight operations Entry exit operations can be done with v data recall of 4 numbers which are automatically assigned during entry exit operations indicated by the RCD abbreviation in this text v data recall
6. e of the Terminal chapter ofthe user manual the following generic totals can be made in the double weighing mode Y Totals for Client Code Y Totals for Plate Code The net weights and number of weighing operations associated with a given client code or a given plate code are memorised These data are available by recalling the following functions gt MENU gt Total Management gt Client Total rapid key CLTOT gt MENU gt Total Management gt Plate Total rapid key PLATET v PRINT obtains the print out of the selected total Y SUMMAR obtains the print out of all codes Y RESET resets the total Y CLIENT allows the operator to move to another client code Y PLATE allows the operator to move to another plate code SOCIETA COOPERATIVA BILANCIAI SOC COOP BILANCIAI CAMPOGALLIANO A R L 41011 Campogalliano MO Via Ferrari 16 tel 39 0 59 893 611 fax 39 0 59 527 079 home page http www coopbilanciai it E mail co coopbilanciai it servizio post vendita after sales service service apres vente Kundendienstservice servicio post venta servico p s venda tel 39 0 59 893 612 fax 39 0 59 527 294
7. o modify the product code the client code and the licence plate by using the PROCOD CLIENT and PLATE keys These changes will be shown only on the print out of the second weight but do not change the data associated with the first weight D410 Printing will take place only if Y the weight stabilises within 10 seconds Y the weight is not negative or over the maximum weight capacity The data printed out depend on the printer connected or the configuration chosen for the first weighing Y If printing on a multicopy card printer the printed data will be date time a consecutive number product code with its relative details client code with its relative details RCD code first weight second weight and net weight Y If printing on a continuous sheet printer the printed data will show all the information given for the first weighing plus date time a consecutive number product code with its relative details client code with its relative details RCD code first weight second weight and net weight If the weighing operation finishes correctly the requested totals are added up the next consecutive number is used and the RCD code and its relative data are cancelled 2 1 3 Unused RCD code recovery The following procedure enables the entry operations again when second weighing procedures cannot be accomplished v access the list of RCD codes using the path below gt MENU gt Data Management gt Code Management gt RCD List
8. repeat the procedure to enter a new code If the product code or client code is not required press ESC after confirming the weight D410 3 2 Weighing procedures with preset weights Once the vehicle is on the weighing scales press the RPD or PPLATE key and enter the desired code to recall the first weight preset by the list The weight on the scales the preset weight code and the preset weight will appear on the display Press for a print out of the weight The following data will be printed on the print sheet v date and time v product code and details if entered v client code and details if entered Y RPD or RPD Plate code and relative first weight associated with the code Y 2nd weight v net weight D410 4 Options for entering the first weight manually In the installation phase it is possible to choose the option that allows the first weight to be entered manually In this case the options that automatically assign a data recall code or plate data recall code are disabled Therefore no data from the first weight are memorised Only the weight is printed out and the relative data including the first weight have to be re entered manually when the second weighing operation is carried out The command for entering the first weight is WEIG R The value of the entered weight must be between 0 and maximum capacity A 16 D410 D410 5 Total management Besides the totals already described in the Us
9. v first weight The data relating to the first weighing operation are held in the memory until the second weight is printed out After this the data are cancelled together with the data recall code The RCD archive can hold up to 300 elements the number of elements can be modified during the installation phase If the terminal has memorised almost the maximum number of RCD codes a message will appear asking for the archive to be resized A 8 D410 2 1 2 Exit weighing procedures The terminal is able to print out the second weight only after the operator has recalled tne RCD code of the first weight Proceed in the following way Y Press key RCD The last RCD code that was used is displayed with the relative entry weight Y Set the RCD code reading it from the print out of the entry operation and confirm by pressing e If the code shown is the desired one merely confirm it by pressing The product code client code and licence plate with their relative details registered during the entry operation will be displayed The operator can modify these by entering the desired information and confirming by pressing after each new setting v Press ESC The weight on the balance will again be visualised with the RCD code and the entry weight Press key to start the exit weighing operation To cancel the operation press key 2 F and then e Remember that once the RCD code has been recalled it is also possible t

BILANCIAI

Contents

Download Pdf Manuals

Related Search

Related Contents