Home

QR-Manual - GPS Tracker Website

image

Contents

1. Move Alarm On or Set Move Alarm Off to indicate the operation is success if the password is not right the operation is fault the tracker will send back information Wrong Password After enable move alarm the tracker would get the current location as original location and it will check the real time location if the change of the location distance between the current location and the original l1 location is greater than 1000 meters the alarm will trigger and the tracker will send alarm and location information by SMS to the preset phone and also send the alarm information to the website server If the change are not canceled every authorized phone would receive max 3 alarm SMS per hour The move alarm SMS is as follow Move Alarm httos maps google com maps q 22 6 7680N 114 15188E Battery 91 In the default the move alarm is OFF 15 Enable And Disable Geo fence Alarm Send SMS GEOFENCEALARMON 123456 zzz or GEOFENCEALARMOFF 123456 to the tracker GEOFENCEALARMON or GEOFENCEALARMOFF is a command 123456 is password zzz is the radius of the geo fence circle unit is km The tracker will send back the information Set Geofence Alarm On or Set Geofence Alarm Off to indicate the operation is success if the password is not right the operation is fault the tracker will send back information Wrong Password The radius of the fencerow can be set from 001 to 999 kilomete
2. 155 133 8011 to the tracker in which IP is the fixed command 123456 is the password and 58 64 155 133 8011 is the IP address amp port of the your own server Having successfully been set there will be a SMS IP 58 64 155 133 8011 5 Set the system GSM work mode The tracker has 3 GSM work modes Mode 1 Factory Mode Shock control standby send SMS MODE 123456 1 to the tracker MODE is a command 123456 is password 1 is the mode 1 If the operation is success the tracker will send back the information SET MODE 1 OK This mode is the default GSM work mode Under this mode when the car begin to move the track will turn on GPS amp GPRS and upload the location to the server when car stop moving or turn off 5 minutes the GSM is standby GPRS off sms amp voice ready and the GPS is off at this moment the GSM can receive SMS and calling and can be triggered locating by SMS or calling Mode 2 Shock control ON OFF send SMS MODE 123456 2 to the tracker MODE is a command 123456 is password 2 is the mode 2 If the operation is success the tracker will send back the information SET MODE 2 OK Under this mode when the car begin to move the track will turn on GPS amp GPRS and upload the location to the server when car stop moving or turn off 5 minutes the GSM amp GPS all are off GPRS off no sms amp voice at this moment the GSM can not r
3. GPRS user name password is right call your tracker SIM card mobile phone company to get the APN amp GPRS setting sending SMS CHECK 123456 to tracker can check the current APN amp GPRS auto setting if the APN amp GPRS are not right please set by the following description send SMS APN 123456 apnname to the tracker in which APN is the fixed command 123456 is the password and apnname is the APN name of a mobile phone company Having successfully been made there will be a SMS APN apnname Send SMS USERNAME 123456 username password to the tracker USERNAME is a command 123456 is the password of the tracker username is the mobile company GPRS user name password is the mobile company GPRS password if the operation is success the tracker will send back the information Username username Password password please call the mobile phone service hot line to get the GPRS username and password some mobile company it is not necessary to set the GPRS username and password if the password is not right the operation is fault the tracker will send back information Wrong Password 4 Set Website Server IP address The tracker IP address has been set to default 58 64 155 133 8011 in factory For normally this is not necessary to change If our server IP is changed we will notice on the website But if you need upload location to your own server send SMS IP 123456 58 64
4. operate other function you can send the SMS command and wait for response the tracker will receive sms and operate the command when the tracker weak up after the setting interval time Or you can press the button A or B or C to start the tracker immediately 6 Set the upload time interval In the GSM work mode 1 the GPS location information upload time can be set from 30 to 999 seconds Send SMS INTERVAL 123456 yyy to tracker INTERVAL is a command 123456 is password yyy is the interval time from 30 to 999 unit is second The tracker will send back information Set Interval yyy OK if the password is not right the operation is fault the tracker will send back information Wrong Password 30 seconds is the default interval time Longer upload interval time can save battery and GPRS data cost but this will make the total mileage to more error Note Only in the GSM work mode 1 this setting is available 7 Set the LEDs ON or OFF The tracker has two LEDs green LED and red LED which indicate different working situation And the LEDs can be set always OFF to save the battery power or to be easy hidden send SMS LEDOFF 123456 or LEDON 123456 to tracker LEDOFF or LEDON is a command 1234560 is password The tracker will send back information Set LEDOFF OK or Set LEDON OK if the password is not right the operation is fault the tracker will send back information Wrong Pas
5. CCTR 800 Portable GPS Tracker 20140716 Welcome to use this portable real time GPS tracker CCTR 800 This product is with GPS module and GSM module that has many new and unique functions such as big chargeable battery strong magnetic pin water proof real time uploading current location to server uploading location to server function can be enabled amp disabled by user controlled by SMS playing back history tracking on website or mobile phone SMS locate with google map sensitive shock sensor built in to control power saving etc It contains high capacity rechargeable polymer battery 2000mARH and intelligent power saving makes the tracker can work max to 2 3 months in the power saving mode The tracker also have CELL ID mobile phone base station ID locating if in the place with no GPS such as underground park indoor room or around high building with bad GPS signal the tracker will reply current CELL ID location with a google map link normally the CELL ID locating precision is about 50 500m in the city and the GPS locating precision is about 10 20m This CCTR 800 can be used as personal tracker without platform send SMS to turn off the uploading server function and trigger locate by SMS or calling is OK Using the unique username and password you can check the history track max to 6 12 months the real time location and set the over speed alarm the geo fence alarm and so on The website is www 999qps net It is Suit for personal
6. S per hour The shock alarm SMS is as follow Shock Alarm httos maps google com maps q 22 6 7680N 114 15188E Battery 91 In the default the shock alarm is OFF 13 Enable And Disable Overspeed Alarm Send SMS OVERSPEEDALARMON 123456 xxx or OVERSPEEDALARMOFF 123456 to tracker OVERSPEEDALARMON or OVERSPEEDALARMOFF is a command 123456 is password xxx is the preset max speed unit is km hour The tracker will send back the information Set Overspeed Alarm On or Set Overspeed Alarm Off to indicate the operation is success if the password is not right the operation is fault the tracker will send back information Wrong Password After enable overspeed alarm the system will check the real time speed when the car is running If the current speed is higher than the preset speed the tracker will send alarm and location information by SMS to the preset phone and also send the alarm information to the website server Every preset phone will receive max 3 alarm SMS per hour The overspeed alarm SMS is as follow Overspeed Alarm 80km H httos maps google com maps q 22 6 7680N 114 15188E Battery 91 Note In the default the overspeed alarm is OFF 14 Enable And Disable Move Alarm Send SMS MOVEALARMON 123456 or MOVEALARMOFF 123456 to tracker MOVEALARMON or MOVEALARMOFF is a command 123456 is password the tracker will send back the information Set
7. acker password the default tracker password is 123456 for higher security please change the tracker password Change tracker password send SMS CHANGEPASSWORD 123456 888888 to tracker CHANGEPASSWORD is a command 123456 is old password 888888 is new password if the operation is success the tracker will send the information New Password 888888 to every preset phone number if the password is not right the operation is fault the tracker will send back information Wrong Password Note Only The authorized phone can change the password Check tracker password send SMS CHECKPASSWORD to the tracker CHECKPASSWORD is a command if the operation is success the tracker will send back the information Password 888888 888888 is an example Note Only The authorized phone can check the password 3 Set APN amp GPRS This tracker use GPRS to upload the information to internet server most mobile company SIM card need enable GPRS service first amp set APN and GPRS user name amp password please call your tracker sim card mobile phone company to confirm This tracker can download amp configure APN amp GPRS username password automatically after power on according the different SIM card in the tracker if the APN amp GPRS user name password are not right Red LED will flash twice then you need sending SMS to tracker to change them manually please confirm the auto configuration of APN amp
8. and 123456 is password the tracker will locate immediately and later send back SMS with current location latitude longitude speed 5 direction to user The SMS information sample is as follow Latitude 22 6 79675N Longitude 114 147141E Tomaia direction s 59 70 S 303 30 Speed km h 45 0 SZ N i N j N f NORTH Eid S EAST Direction 303 30 P N E GMT 2013 02 02 08 29 06 alo Battery 91 The unit of latitude and longitude is DEG The unit of direction is DEG which means the angle between the moving direction and the due north anticlockwise 303 30 for example means the car is in the northwest and the angle between the due north is 59 70 DEG 360 303 30 59 70 like below The time and date are GMT s For example if in New York USA and receive the SMS like above then the right time and date in local is 03 29 06 2013 02 02 GMT time add New York time zone 05 the 5 western time zone 5 Cell ID Locate When user trigger tracker reply location by SMS if the tracker is in the place where there is no GPS signal such as underground park indoor room the tracker will reply SMS with CELL ID location to user and the precision is about 50 500m according to the around mobile phone base station density The location SMS is like below click the link the map is same with the above 2 No GPS signal just Cell ID Location https maps google com maps q 22 67680N 114 15188E Battery 91 Sen
9. ccidents car adapter or AC adapter is necessary for recharging the recharging will cost 4 5 hours If it is used in car we recommend connect a 12 24V DC adapter to the car battery the output insert to the tracker and the input connect to the car battery please check and confirm the adapter model is suitable for this tracker 4 1 Use Car charger connect the USB wire to car charger and CCTR 800 tracker insert the car charger to car is OK if the LED on the car charger change to Green it means the charging is finished The fully charging need about 5 10 hours 4 2 Use AC charger connect the USB wire to AC charger and CCTR 800 tracker insert the AC charger to AC socket 110 220V is OK if the LED on the AC charger change to Green it means the charging is finished The fully charging need about 5 10 hours 4 3 Also use PC USB can recharge the tracker but the recharge time will be longer the fully charging need over 10 hours connect the USB wire to PC USB socket and CCTR 800 tracker is OK Note The voltage of the charger mustn t be higher than 5 5V the high voltage will damage the tracker even cause accidents Please use the OEM adapter it needs 5 10 hours to charge the tracker fully 9 Low Battery Alarm When the tracker battery voltage is low the GREEN LED of the tracker will flash 3 or 4 times and then the tracker will send battery low information SMS to the preset phone Low power Battery 8 6 Back to default set Factory con
10. cel all alarm setting if the password is not right the operation is fault the tracker will send back information Wrong Password The tracker will power off and then power on automatically this will take a few minutes and then cancel all the alarm setting in the tracker including shock alarm move alarm geo fence alarm over speed alarm etc 10 Back to factory configuration send SMS FACTORY 123456 to tracker FACTORY is the fixed command 123456 is password The tracker will send back information Set factory setting OK if the password is not right the operation is fault the tracker will send back information Wrong Password After this The tracker will cancel all the alarm setting in the tracker including shock alarm move alarm geo fence alarm over speed alarm delete all the authorized phone number delete the APN and GPRS user name and password change the tracker password to 123456 reset the IP address reset the system working mode and the interval time and so on 1 gt If forgot the password you can not reset by the SMS command 2 gt After back to default set if the IP APN GPRS name amp password are changed manually you need set these again by sending SMS 11 SMS Start Stop Enable Disable Uploading Location to Server The uploading location to internet server can be enabled Start or disabled Stop by SMS if the uploading location to server is disabled the tracker will not uploa
11. cker Pay attention to that the SIM card metal contact pin can not face down to the holder at last push the long narrow rubber stopple into the tracker to cover the SIM card socket Note 1 gt This tracker use 2G GSM network and it upload tracking only through GPRS it can not work in CDMA Ea network or 3G WCDMA or CDMA2000 network Many 3G SIM card can use 2G GSM network this SIM card can use in this tracker 2 gt Enable the SIM card GPRS service order a GPRS data package 20 30M month can save data charge Normally the tracker will use about 20M GPRS data every month 3 gt Please confirm the PIN code of the SIM card is disabled 4 gt Before installing or uninstalling the SIM card please power off the tracker 3 LED flash indicator GREEN LED Flash once GSM amp GPS working well GREEN LED Flash twice GSM working well and no GPS signal GREEN LED Flash three times GSM amp GPS working well but battery low GREEN LED Flash four times GSM working well battery low and no GPS signal GREEN LED ON continuously GSM searching network GREEN LED OFF continuously Power off GREEN LED Flash fast incoming a call or sending SMS RED LED Flash once uploading current tracking RED LED Flash twice can not upload tracking now RED LED Flash slowly the tracker is being charged 4 Recharge and power supply For CCTR 800 power supply is 4 5 5 5V too high voltage or AC voltage may damage the tracker or even cause a
12. cker will send back the information Add Preset Phone Ok if the password is not right the operation is fault the tracker will send back information Wrong Password 2 Making a call trigger reply Google map link SMS Platform is not necessary Call the tracker SIM card number after ring 3 times the tracker will hang up the call automatically and locate immediately a few seconds later the tracker will send back SMS with current location google map website link user click the website link to visit internet the map will display on mobile phone If the tracker has set the authorized phone number then only authorized number calling the tracker can trigger the tracker locate and reply SMS other phone number calling has no response The SMS information sample is as follow https maps google com maps g 22 6 680N 114 15188E Battery 91 ne Times Square m New York NY 10036 3 Send a SMS trigger reply Google map link SMS Platform is not necessary Send SMS LINKLOCATE 123450 to the tracker also can trigger the tracker locate amp reply Google map link SMS LINKLOCATE is a command 123456 is password if the password is not right the operation is fault the tracker will send back information Wrong Password The SMS amp map examples are same as above 4 Send a SMS trigger reply latitude longitude SMS Platform is not necessary Send SMS SMSLOCATE 123456 to the tracker SMSLOCATE is a comm
13. d location to server unless user enable Start the uploading location to server function again at this condition it still can be used as a personal tracker without platform send SMS START 123456 or STOP 123456 to tracker START or STOP is a command 123456 is password The tracker will send back information Set upload start OK or Set upload stop OK if the password is not right the operation is fault the tracker will send back information Wrong Password After stop uploading location to server the tracker is just like a personal tracker Note the default setting is the uploading location to server function is enabled 12 Enable And Disable Shock Alarm Send SMS SHOCKALARMON 123456 or SHOCKALARMOFF 123456 to the tracker 10 SHOCKALARMON or SHOCKALARMOFF is a command 123456 is password the tracker will send back the information Set Shock Alarm On or Set Shock Alarm Off to indicate the operation is success if the password is not right the operation is fault the tracker will send back information Wrong Password After enable shock alarm the system will check shock sensor if the shock sensor is trigger the tracker will send alarm and location information by SMS to the preset phone and also send the alarm information to the website server If the tracker shock is triggered continually every authorized phone number will receive max 3 alarm SM
14. eceive SMS and calling and can not be triggered locating by SMS or calling Only shock sensor can trigger the tracker wake up This mode can save battery power than mode 1 if the tracker stop moving standby time can reach over 40 days different according the GSM signal and working condition Mode 3 Timing Periodical ON OFF Send SMS MODE 123456 3 xx to the tracker MODE is a command 1234560 is password 3 is the mode 3 xx is the sleep time from 01 99 unit is hour If the operation is success the tracker will send back the information SET MODE 3 OK The sleep time can be set from 01 hour to 99 hours Under this mode the GSM and the GPS are both controlled by timer interval time The tracker GSM and GPS will power on and upload the current location to server and then turn off the GSM and the GPS no sms or voice service or GPRS and the timer will begin to count after the time is up for example the above is 24 hours the tracker will turn on the GSM and the GPS automatically then upload the current location to server and then turn off the GSM and the GPS again and the timer will begin to count again and repeat the above process The mode 3 is lowest power cost In this mode the solar battery in the sunlight can meet the demand of the power cost the tracker could work very long time and Is very suitable for longtime transportation tracking Note In the mode 3 if you need change the set or
15. figuration send the SMS command to the tracker can reset to the factory configuration The SMS command is FACTROY 123456 Please see the detail in following description 7 ANTENNA The Antenna of GSM and GPS are built in the tracker So please leave the tracker away from big metal that will reduce the GSM and GPS signal 8 Waterproof The design of the tracker is IP56 level waterproof it means the raining or sprinkling can not damage the tracker but you can not drop the tracker into water 9 Using Condition The working temperature is 20 C to 60 C over this range the specification maybe can not reach the standard level the storage temperature can reach to 40 C to 80 C Simply Using Step 1 First to buy a 2G GSM phone SIM card and enable GPRS service order a data package 20 30M Normally tracker will use 20M data every month install in the tracker please refer Before Using 2 2 Press any SOS button till the Green LED on continuously the tracker is powered on put the tracker outdoor for easy get GPS amp GSM signal 3 Check LED flash refer Before Using 3 for detail If Green LED flash once means GSM and GPS signal well And Red LED flash once means the location has been uploaded to the server 4 Call the tracker or send SMS LINKLOCATE 123456 to the tracker the tracker will reply the tracker location with Google map link by SMS 5 Visit amp login the tracking platform www 999gps net display current location
16. ight or not 5 When call the tracker it has ringing but it will not hang up the calling please check the tracker has set the authorized phone number use the authorized phone call the tracker or delete the authorized phone number 6 Can not login the platform send SMS to check the ID of the tracker then try again if not success please contact your supplier 7 After go out the under ground park some tracking maybe lost the GSM and GPS module will take a few minutes to receive signal and re locate some tracking maybe lost this is normal 8 Some time some location point is lost this is normal in the transmit process some point maybe lost but this will not happen very often Specification GSM Module SIMCOM 900 or 800 GPS Module Sirf Star or MTK GSM Frequency 850 900 1800 1900 MHz GPS channel 32 channels Packing list Car Charger Input 10 30V Output gt 0 5A 5V Warranty This system has been tested before sold We strongly recommend you to get this system installed by professional There is a one year warranty except the following condition 1 Installed fixed or changed by personally or unprofessional 2 Warranty will eliminate if the ownership of the tracker has been changed 14 3 Parts damaged by man made 4 Battery adapter wires etc Warning this device is just an auxiliary product that applying the location of current object we have not any responsibility if you have damage or lost in using
17. ior Locate Operation amp Setting 1 Add Delete Check authorized number The authorized phone number is used to send alarm information by SMS or use mobile phone to locate the tracker without platform if the authorized phone number is not set then the alarm information can not send to user by SMS alarm battery low SOS etc The Add command please see Basic Locate Operation amp Setting Delete authorized phone number by SMS Send SMS DELETEPHONE 123456 A to the tracker DELETEPHONE is a command 1234560 is password A is authorized phone number location there are 3 locations A and B and C if the delete operation is success the tracker will send back the information Delete Preset Phone Ok if the password is not right the operation is fault the tracker will send back information Wrong Password Check authorized phone number by SMS Send SMS CHECKPHONE 123456 to tracker CHECKPHONE is a command 123456 is password ibe if the operation is success the tracker will send back the information Preset Phone A 13987654321 B 13876543210 C 13765432100 the phone number is just an example if the password is not right the operation is fault the tracker will send back information or Wrong Password 2 Change Check Tracker Password The tracker password is used to protect the tracker only can be operated by owner every SMS command need follow tr
18. ollow HELP httos maps google com maps g 22 6 7680N 114 15188E Battery 91 Notes 1 This tracker use 2G GSM network and it upload tracking only through 2G GPRS it can not work in CDMA network or 3G WCDMA or CDMA2000 network Some 3G card can work in 2G GSM network then this kind of 3G SIM card can be used in this tracker please call mobile phone company to confirm the sim card support 2G GSM network or not 2 Please confirm that the SIM card PIN code has been disabled Otherwise the tracker can not find GSM network the Green LED will keep ON 3 Also please confirm the SIM card has enable GPRS service the tracker will cost 20 30M GPRS data every month order a GPRS data package can save money 4 The antenna of GSM and GPS is built in tracker please note that the install location of the tracker must can receive the GPS signal normally the back of the seat or arm rest box or under the back window or room on the panel etc please leave away the tracker from big metal and keep away from the magnetic components 5 The tracker built in high capacity Li battery recharge one time can use about 15 20 days standby please use our OEM DC adapter for charging change the working mode can extend the working time longer 6 The tracker built in GSM and GPS module so please power off the tracker at the special place that restrict using mobile phone such as on the plane etc 7 The GPS need 10 200 seconds to locate the position when
19. playback history tracking etc can be operated platform user name and password is the last 7 digital numbers of the tracker s ID for example ID is CC8001401234567 and then the user name is 1234567 password is 1234567 user can change the password send SMS ID 123456 or CHECK 123456 to tracker can check tracker ID 6 iPhone Android App Wap WeChat also use the same user name and password with website login downloading amp installation please refer the platform operation guide 7 Fleet user can be created for easy fleet management 8 This tracker can auto download amp configure APN amp GPRS user name amp password if the auto configure is not right the Red LED will flash twice the tracker can not upload location to server then you need send SMS to tracker to change the APN amp GPRS manually and send CHECK 123456 to tracker can check the APN auto configure call the tracker SIM card supplier to confirm the APN amp GPRS is right _4 Basic Locate Operation amp Setting 1 Add authorized phone number Send SMS ADDPHONE 123456 A number Not including the quotation marks Number means the telephone number you want preset the following is same to tracker is OK ADDPHONE is a command 123456 is password A is authorized number location every tracker have 3 authorized phone number locations Aand B and C so you can set 3 phone numbers if the add operation is success the tra
20. rs After enable geo fence alarm the tracker would get the current location point A for example and it would check the real time location if the change of the location distance between the current location and the preset location was greater than the radius the alarm was trigged and the tracker would send alarm and location information by SMS to the preset phone and also send the alarm information to the website server If the tracker is not back to geo fence every preset phone would receive max 3 alarm SMS per hour The geo fence alarm SMS is as follow Geofence Alarm https maps qgoogle com maps q 22 6 7680N 114 15188E Battery 91 Note In the default the geo fence alarm is OFF 16 Cancel All Alarm Setting send SMS CANCELALARM 123456 to tracker CANCELALARM is a command 123456 is password the tracker will send back information All Alarm Cancel and cancel all the shock alarm setting in the tracker if the password is not right the operation is fault the tracker will send back information Wrong Password Note RESET and FACTORY also can cancel all alarm setting please see above 17 SOS Emergency In the normal mode press the SO button and don t not release Press button over 6 seconds the GREED LED will flash quickly a few seconds later the GREEN LED will turn OFF then release the button the tracker will send SOS help information to all 3 preset phone The SOS SMS information sample is as f
21. sword And then the LEDs turn off immediately And the LEDs can t indicate the working situation but when charge the tracker with a adapter the red LED will be on in all the charging process Note Default the LEDs will be ON 8 Check tracker setting Send SMS CHECK 123456 to tracker CHECK is the fixed command 123456 is password The tracker will send back information including software version ID S N number IP address authorized phone number GPS and GSM signal etc if the password is not right the operation is fault the tracker will send back information Wrong Password The following is an example 800 V Mar 03 2014 CC8001400820800 MODE 1 58 64 155 133 8011 30 A 1398 7654321 B 13876543210 GPS OK GSM 95dBm CMNET 88 800 Product Model V Mar 03 2014 Software version date CC8001400820800 ID S N number MODE 1 GSM Working Mode 98 64 155 133 8011 Server IP and Port 30 Upload Interval Time _9_ A 13987654321 Authorized number A B C GPS OK GPS status GSM 95dBm GSM signal strength CMNET APN name 88 Battery Note This command usually be used to check the tracker current status amp configuration if the tracker can not work well this command can check what the problem is 9 Re power On amp Reset Tracker send SMS RESET 123456 to tracker RESET is a command 123456 is password The tracker will send back information Reset Tracker and can
22. the GSM signal is weak or the network is very busy the SMS maybe delay to send by the GSM network this is normal 8 The tracking data on our server will Keep 6 12 months the old data will be deleted Trouble Shooting 1 The tracker auto power off please confirm the tracker battery have enough power and try to recharge it and confirm the adapter is working well When charging the LED on the adapter is RED if the LED is GREEN means the charging is finished the charging process will cost 5 10 hours 2 After power on the tracker the tracker GREEN LED keep on and it has not any repose and no ring please confirm the SIM card has been installed properly the SIM card PIN code is disable and the SIM card has enough charge and the mobile phone can work well in that place If the tracker work well the Green LED will flash once every 4 seconds 3 If the tracker can not upload location to website please confirm the SIM card has GPRS function and aie the APN or GPRS auto configure is right Send SMS CHECK 123456 to check auto configure and call the mobile phone hot line to confirm APN amp GPRS if the tracker do not move the tracker will not upload tracking try moving the tracker 4 f the tracker can not send back information by SMS please confirm the SIM card has ID caller display function and SMS service function and please read the SMS information of the tracker sending back and check the instruction amp password is r
23. this tracker Model CCTR 800 Serial Number i Distributor Notes The explanation of this manual is belonged to our company some small changes may not notice customer if you have any problem please contact us thanks
24. user or fleet user and it can locate object by visiting website wap visiting by phone Android App or iOS iPhone App on mobile phone WeChat on mobile phone Android iPhone Symbian Windows phone Blackberry sending sms etc The CCTR 800 is specially designed for portable tracking such as cars trucks bus personal amp moving equipment tracking it is no installation and easy to use put the tracker in car or bring in bag is OK QR Manual Download Word QR Manual Download Pdf iPhone App Download Android App Download Wechat Official Account Product sos Charging S Card USB Charging Wire 12 24V Car Adapter Socket Rubber Cover The following is the optional accessory e e Ww 12 24V DC Adapter Home AC Adapter USA Home AC Adapter Europe Before Using 1 Power ON OFF If the tracker is powered OFF press and hold the SOS Button and release after the GREEN LED is ON then the tracker is powered ON If the tracker is powered ON press and hold the SOS button until the GREEN LED flash quickly release the button and press the SOS button 3 times quickly then the GREEN LED will turn off and the tracker will power OFF 2 Install SIM card Pulling out the long narrow rubber stopple beside the tracker you can see the SIM card socket beside which press the yellow switch button with a tool and then the holder will come out Pull it out and put the SIM card in the holder and then push the holder into the tra

Download Pdf Manuals

image

Related Search

Related Contents

取扱説明書 (お客様用)  notice - Biolabo  Hampton Bay 14792 Instructions / Assembly  MTN580693 Interface Viento  User Guide      Samsung GT-S7230E/H User Manual  Brochure CT Analyzer  [PDF:0.6MB]  

Copyright © All rights reserved.
Failed to retrieve file