Home

Vieta-VH

1. Check the disc type color system and regional code Check for any scratches or smudges on the disc Press MENU to exit the system setup menu Disable the password for parental control or change the rating level 17 Moisture has condensed inside the system Remove the disc and leave the system turned on for about an hour Disconnect and reconnect the AC power plug and then turn on the system again Poor radio reception Increase the distance between the unit and your TV or VCR Fully extend the FM antenna Connect an outdoor FM antenna instead Audio or subtitle languages cannot be set The disc is not recorded with sound or subtitles in multiple languages The audio or subtitle language setting is prohibited on the disc Cannot display some files in USB device The number of folders or files in the USB device has exceeded a certain limit This phenomenon is not a malfunction The formats of these files are not supported USB device not supported The USB device is incompatible with the unit Try another one Timer does not work Set the clock correctly Switch on the timer Clock timer setting erased Power has been interrupted or the power cord has been disconnected Reset the clock timer Can t operate This unit contains a microcomputer for signal processing and control functions In very rare situations severe interference noise from an external source or static electr
2. Touch this button to turn on this product or switch to the Eco Power standby mode Disc Compartment USB Connect to a USB flash drive MP3 LINK Connect to an external audio device 2DISC Touch this button to open or close the disc compartment DOCK Touch this button to rotate out or rotate in the iPad iPhone iPod docking GH FUNCTION Touch this button repeatedly to select a source pb EE PLAY Start or pause playback Search station VOLUME Touch this button to decrease the volume level 10 VOLUME Touch this button to increase the volume level 11 Remote control sensor 12 Display lens 13 iPad iPhone iPod Docking Remote Control i e i L lt gt p gt lt TIMER REPEAT A B SHUFFLE DOG p el Zei el S 1 QD do SETUP MENU TITLE ANGLE SUBTITLE ZOOM Cm us D Gi nisc pock runer inpu 34 D foi E G5 D 49 Iesel Rsca audio oim 5 7 Turn on this product or switch to the Eco Power standby mode Numeric keypad 0 9 Select a title chapter track Input password Select a preset radio station GOTO Access quick menu of title chapter track selection 4 SLEEP TIMER Set sleep timer Set alarm timer 5 REPEAT Select repeat play modes 6 CLOCK Display curr
3. VH SB550BK Manual de instrucciones Barra de sonido multimedia Manual de Instru es Carril de som multimedia Instruction Manual Multimedia Sound Bar Contents IMPORTANT SAFETY INSTRUCTIONS 2 SAFETY EE 2 WIN Go rs coissa sda s Pheed saat dada a nnen nnne 2 Identifying the PAINS saias assa Dadas 4 UG q RAMPA E RAND 4 Remote Control nenne nne 6 CONECO S essere errit saio ca dlns ut 7 Connect io FM Ben ssasspsaasmarassunasaaanbaguaiaaneadiaansa 7 Connect to Das Soda 7 Connect to an External Audio Device 8 Connect e 9 Battery Installation E 9 Precautions Concerning Batteries 9 Install Remote Control Batteries essseeeseseeeeenenn 9 Basic Operation E 10 EE 10 Select the Correct TV System 10 Change System Menu Language 10 Set the Clock eebe een 10 Adjust Volume Level 10 Select a Preset Sound Effect 10 S per BASS BOOS irssi 10 Select Surround Sound uk 10 Mute Sound E 10 Adjust Brightness of Display Panel 10 el ET 11 ee 11 Play nom USB E 11 Play MP3 WMA Picture Files A 11 Play COMO css nao tse eteeinemaraceectcenastniadecandutwnetenet 11 Play 241 01d kc eee ee em ee ds 12 Picture View Options ssa candscascdcvcaimcseacniutncieeatanestass 12 Pletgen 13 Adjust yO MNS secret
4. e When you select a preferred language that is not recorded on the DVD one of the recorded languages is automatically selected e You can override the Audio setting in the Setup menu by pressing the AUDIO button on the remote control unit while a DVD disc is playing e You can override the Subtitle setting in the Setup menu by pressing the SUBTITLE button on the remote control while a DVD disc is playing e Select Off to turn subtitles off Note that subtitles on some discs cannot be removed even when you select Off 15 Parental Play back of some DVD discs can be limited depending on the age of the users The parental control system allows the playback limitation level to be set by the parent Note e The lower the level the stricter the limitation e lf the rating of the loaded DVD disc is higher than the level you set the system will require a password Enter your password and press the ENTER button to start playback 1 Select the desired parental control level from the menu then press Enter button 2 You will be prompted to enter your password Use the 0 9 buttons to enter 000000 or your privacy password if already established e No need to enter a password if Password Mode is set to OFF Default All the items in the Setup menu except for the password and parental control will be reset to the default settings Password Password Mode You can temporarily unlock discs for playback according to the l
5. Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 Battery usage CAUTION To prevent battery leakage which may result in bodily injury property damage or damage to the apparatus Install all batteries correctly and as marked on the apparatus Do not mix batteries old and new or carbon and alkaline etc Remove batteries when the unit is not used for a long time 16 The batteries shall not be exposed to excessive heat such as sunshine fire or the like 17 Apparatus shall not be exposed to dripping or splashing 18 Do not place any sources of danger on the apparatus e g liquid filled objects lighted candles 19 This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations 20 When the appliance coupler is used as the disconnect device the appliance coupler shall remain readily operable 21 Do not expose the apparatus to any dripping or splashing and make sure no object filled with liquids such as vases etc are placed on them WARNING e Before operating this system check the voltage of this system to see if it is identical with the voltage of your loca
6. WIDE Use with a 16 9 wide television OSD On Screen Display Language Select the desired language for on screen menus of the unit Screen Saver On The screen saver starts up if nothing is played back and no operations are performed for 4 minutes Off The screen saver does not start up Last Memory On Select this to make last memory function available Off Select this to make last memory function invalid Audio Setup Page Downmix Analog Audio LT RT 5 1 channel audio is mixed into left channel and right channel and is output via FL and FR speakers respectively Stereo 5 1 channel audio is mixed into stereo signal and is output via the FL and FR speakers Off Select this to make this function invalid Note Only for Dolby AC 3 encoded 5 1 channel discs 3D Processing This setting provides following sound effects Off Concert Living Room Hall Bathroom Cave Arena Church Video Setup Page Quality You can adjust some parameters of video picture 1 Highlight Quality and press the gt button 2 Use the lt gt buttons to select the parameter Sharpness This adjusts the sharpness of the picture shown on the monitor Select High Medium or Low using the Cursor buttons and press the ENTER button Brightness This adjusts the brightness of the picture Use the left and right buttons to change the value and press the ENTER button Contrast This adjusts the picture contrast Use
7. not to be used for a long time more than a month remove the battery from the Remote Control to prevent it from leaking e Ifthe batteries leak wipe away the leakage inside the battery compartment and replace the batteries with new ones e Do not use any batteries other than those specified Do not mix new batteries with old ones e Do not heat or disassemble batteries Never throw them in fire or water e Do not carry or store batteries with other metallic objects Doing so could cause batteries to short circuit leak or explode e Never recharge a battery unless it is confirmed to be a rechargeable type Basic Operation Power You can use all the functions on the panel of the unit or the remote control after connecting to power supply called Standby Mode Turning the System On Press the amp button to turn the system on from standby mode Note The set switch to last selected source Turning the System Off Press the amp button again to turn the system off and go to standby mode Note Be sure to unplug the power cord from the outlet when the system is not in use for an extended period of time Select the Correct TV System Change this setting if the video does not appear correctly By default this setting matches the most common setting for TV in your country 1 No disc mode press the SETUP button 2 Select Preference Setup Page 3 Select TV Type and then press the button 4 Select a setting and then
8. the left and right buttons to change the value and press the ENTER button Gamma This adjusts the gamma value of the picture Select High Medium Low or None using the Cursor buttons and press the ENTER button Hue This adjusts the green red balance of the picture only for progressive scan and S Video output Use the left and right buttons to change the value and press the ENTER button 14 Saturation This adjusts the saturation level Use the left and right buttons to change the value and press the ENTER button 3 Press left button a to return to the Video Setup Page HDMI Setup On HDMl Select this to have the signal output when your TV or monitor is connected to the HDMI out terminal Off HDMI Select this when you do not use the HDMI out terminal No signal is output from the HDMI out terminal AUDIO FORMAT AUTO Detect and select the best supported audio format automatically PCM Multi channel audio format will be down mixed to two channel sound RESOLUTION The resolution options include 480p 60Hz 720p 60Hz 1080i 60Hz 1080p 60HZz 576p 50Hz 720p 50Hz 1080i 50Hz and 1080p 50Hz CEC SETUP You can use one single remote control to control HDMC CEC devices that are connected through HDMI connectors Note To enable the HDMI CEC feature you must turn on the HDMI CEC operations on the TV and on other devices connected to TV Refer to TVs devices manual for details HDMI CEC On Select this
9. Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 For countries with a polarized mains do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Caution To prevent electric shock match the wide blade of the plug to the wide slot fully insert 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer xo TT N rs rs 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14
10. Select a Preset Sound Effect During play press the RS EQ button repeatedly to select MOVIE TV DANCE JAZZ MUSIC Super Bass Boost Press the RS BASS button repeatedly to select the base boost level Select Surround Sound Press V SUR button to get surround sound Press this button again to cancel the effect Mute Sound During play press the MUTE button to mute or restore sound Press this button again or VOLUME button to cancel the effect Adjust Brightness of Display Panel Press the DIM button repeatedly to select different levels of brightness for the display panel Play Play a Disc Caution Never look at the laser beam inside the unit Risk of product damage Never play discs with accessories such as disc stabilizer rings or disc treatment sheets Never put any objects other than discs into the disc compartment 1 Press the DISC USB button to select the DISC source 2 Use the amp DISC button to open the disc tray 3 Place a disc onto the disc tray with the printed side up and use the amp DISC button to close the disc tray 4 The unit will read the disc and play it automatically To stop play press the E button To pause or resume play press the Il button To skip to the previous next title chapter track press the I lt lt bbl buttons If play does not start automatically Select a title chapter track and then press the El or ENTER but
11. V lt gt to pan through the image Play iPad iPhone iPod You can enjoy audio from iPad iPhone iPod through this unit Note You can play video from iPad iPhone iPod through connecting AV VIDEO terminal Some function keys are unavailable for iPad 1 Press the DOCK button on remote control or Gi FUNCTION button on front panel to select the iPad iPhone iPod source 2 Touch the 4 DOCK button to rotate out of the iPad iPhone iPod dock 3 Place the iPad iPhone iPod in the dock 4 Start to play the connected iPad iPhone iPod To pause resume play press the B gt EE button To skip to a track press the I lt PI buttons To search during play press and hold Lea bb buttons then release to resume normal play To navigate the menu press MENU button then press A Yto select and press ENTER to confirm To select repeat play options press the MODE button repeatedly to select a repeat option play mode To select repeat shuffle options press the MODE button repeatedly to select a shuffle option play mode Charge the iPad iPhone iPod The docked iPad iPhone iPod begins to charge as soon as the unit is connected to AC power Remove the iPad iPhone iPod 1 Pull the iPad iPhone iPod out of the dock 2 Press amp DOCK button on the front panel to rotate in of the iPad iPhone iPod dock 13 Adjust Settings Introduction This chapter describes how to use the SETUP menu Most settings and adjustmen
12. a casa acesas nad da 13 Introduction EE 13 General Setup e EE 13 Audio Setup Page ssssesessessssensssrrrnnssesrnnnnsrrrnnene 14 Video Setup PAGO rcevcorsscrnecnevsnceneureguadetsereiaweseteecesans 14 Preference Setup Fier sehesstese gees 15 Listening to the FM Radio cs 16 TURING in a el ns q a 16 Presetting erer 16 Tune to a Preset Radio Station 16 Other Features A 16 Set the Alarm Tmer 16 Set the Sleep Timer oo 16 Troubleshooting RR 17 Specifications weceemenseedesnnielectnttebeenaanienenecccceoueetdecans 18 Standard Accessories 18 IMPORTANT SAFETY INSTRUCTIONS WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead AN symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an N equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance SAFETY 1 Read these instructions 2 Keep these instructions 3
13. d 2 Select a file then press the PROG button to delete the file from the program list sch e KR ON Change the Audio Channel e During play VCD press the AUDIO button repeatedly to select an audio channel available on the disc Mono Left Mono Right Stereo e During play DVD press the AUDIO button to select an audio language Display Menu In play mode press the TITLE button to go back to the title menu during PBC playback Select a Camera Angle During play press ANGLE button repeatedly to select a camera angle Note This feature is only available for DVDs recorded with multiple camera angles Picture View Options Preview Pictures 1 During play press the E button The thumbnails of 12 pictures are displayed 2 Select one of the following a picture the slide show option the menu option the next previous page if available 3 Press the ENTER button to play the selected picture Start slide show of all pictures enter the menu where each remote key function is explained turn to the next previous page if available Select a Slide Show Play Mode e During play press the PROG buttons repeatedly to select a slide show play mode Rotate Picture e During play press the lt gt 4 Wbuttons to rotate the picture anti clockwise clockwise Zoom in out Image During video play press the ZOOM button repeatedly to zoom in out the image When the image is zoomed in you can press the A
14. econds to activate automatic programming All available stations are programmed in the order of waveband reception strength The first programed radio station is played automatically Program radio stations manually Tune in the desired station then press the PROG button Press the 0 9 I lt lt or gt gt I buttons to select the preset number Press the PROG button to store the station Repeat above steps 1 to 3 for each station you want to store in memory with a preset number Press and hold the E button to erase the memory radio stations Note If the system is unplugged or if a power failure occurs the preset stations will not be erased q EO N Tune to a Preset Radio Station e Press the I lt or gt gt I buttons to select a preset number that you want Note You can also use the numerical keypad to select a preset station directly 16 Other features Set the Alarm Timer In standby mode you can use the daily timer setting to turn the unit on automatically at a certain time everyday under standby mode However the clock must be set correctly for the timer function to work 1 In standby mode press and hold the TIMER button for several seconds then press A Y button to select an alarm sound source 2 Press the TIMER or ENTER button volume indicator will blink Set the alarm volume with the A button or Ybutton 3 Press the TIMER or ENTER button hour indicator will blink Set the hour
15. ent clock Hold and press insandby mode activate clock setup E Stop play Erase a preset radio station H Pri Skip to next title chapter tracks Select next radio station O MUTE Press this button to mute or resume the sound 10 I lt Skip to previous title chapter tracks Select previous radio station 11 SETUP Access or exist system setup menu 124 Navigate up through menus Tune to a radio station Rotate a picture 13 lt lt Navigate left through menus Search backward within a track disc Tune to a radio station by searching backward 14y Navigate down through menus Tune to a radio station Rotate a picture 15 TITLE Access title menu 16 ANGLE Select a camera angle to view video play 17 DISC USB Select DISC or USB function 18 DOCK Select DOCK function 19 RS BASS Enable and adjust bass level 20 RS EQ Select a preset sound effect MOVIE TV DANCE JAZZ MUSIC oa Open or close the disc compartment 22 PROG Program tracks Program titles chapters fo DVD playback Program radio stations Erase file from program list 23 SHUFFLE Select shuffle play modes 24 A B Repeat a specific section within a track chapter 25 OSD RDS Display play information on TV 26 gt Il Start or pause play Press and hold change the grid for tuner searching 2 VOL Volume Increase the volume level 28 VOL Volume Decrease the volume level 29 MENU For video discs Access or exit disc menu For video disc with p
16. er try to repair the system yourself If you encounter problems when using this unit check the following points before requesting service No power Ensure that the AC cord of the apparatus is connected properly Ensure that there is power at the AC outlet Press standby button to turn the unit on No disc detected Check if the disc is inserted upside down Wait until the moisture condensation at the lens has cleared Replace or clean the disc Use afinalized CD or correct format disc No picture Check the video connection Turn on the TV to the correct Video In channel Black and white or distorted picture The disc does not match the TV color system standard PAL NTSC Sometimes a slight picture distortion may appear This is not a malfunction Clean the disc The aspect ratio of the TV screen cannot be changed even though you have set the TV display format The aspect ratio if fixed on the loaded DVD disc The aspect ratio may not be changed for some TV systems Remote control does not work Before you press any function button first select the correct source Reduce the distance between the remote control and the unit Insert the battery with its polarities aligned as indicated Replace the battery Aim the remote control directly at the ensor on the front of the unit Disc does not play Insert a readable disc and ensure that the label side faces up
17. evel To change this setting select On or Off enter your password and press the ENTER button On You need a password to change the level of parental control Off You can change the level of parental control without a password You cannot temporarily unlock discs for playback Password You can set a new password for parental control The default password is 000000 1 Select Change and press the ENTER button 2 Enter 000000 or your privacy password using the 0 9 buttons 3 Enter a new password 4 Enter the same password again to confirm 5 Press Enter button Note you will need your password to change the level of control in the future as well as to temporarily unlock discs for playback If you forget your password use 000000 Listening to the FM Radio Tuning in a Station 1 Ensure that you have connected and fully extended the FM antenna 2 Press the TUNER button to select the TUNER source 3 Press the lt lt gt buttons the frequency changes down or up automatically until a station is found Or press 4 buttons repeatedly until you find the station you want Note Press and hold EI button on the remote control to change grid The unit will automatically switch the Stereo or MONO channel to receive the FM radio mode it can get the best effect Presetting Stations You can preset up to 20 FM stations e Program radio stations automatically Press and hold the PROG button for 2 s
18. icity may cause it to lockup In the unlikely even that this should happen unplug the power cord from the wall outlet wait at least 5 seconds and then plug it back in again Using iPhone to play music While the iPhone is playing the music throught the docking there may be a chance that the iPhone may not be under a good receiption mode to get the incoming call signal Specifications General Power EE E AC 230V 50Hz Power Consumption E 45W CHE Mirenen eneee R E a A e REAREA a EEEE 50W x 2 100W Total Harmonic Distortion EE 1 1kHz 1W Audio Input Sensitivity Impedance ven ceessicncectssesmiviabhillisacian ma ud eu LINE 500mV 47kQ Frequency IROSDONSO sascsiesisesiecctcccncctocccsccesnsppasanuiansadaaaatieamnennnnccencetenseausuuaubesseoestsihecsesceids 40Hz 20kHz 3dB SETAC Range decrease RPE R tte E rennan ee neiaa marae FERE aceasta DD RR NE KEKEE 87 5 108 0MHz Unit Dimensions W x H x D EE 990 x 299 x 84mm Speaker Front HEEN 39 Rated POW T ROSDDRDRR CD RR SER SD RANA SERES COLEESNNNDO RR RR OD RR NiE 50W Woofer lun ee Die 6 O Rated EE 100W Remote VUNG eege 6m ee 30 Standard Accessories GI En EE xX 1 Video Cable EE x1 Batteries io x2 Remote ei de NEE x1 Owners te x1 POWER Gord asean E e EN ES AAEE x1 e Design and specifications are subject to change without notice 18
19. ing the AC power cord ensure you have completed all other connections Connect the AC power cord to the AC socket on the unit the wall socket Install Remote Control Batteries The provided Remote Control allows the unit to be operated from a distance When operating the Remote Control point it towards the remote sensor on the front panel of the unit e Even if the Remote Control is operated within the effective range 5m remote control operation may be impossible if there are any obstacles between the unit and the remote control e If the Remote Control is operated near other products which generate infrared rays or if other remote control devices using infrared rays are used near the unit it may operate incorrectly Conversely the other products may operate incorrectly Battery Installation 1 Remove the battery compartment cover 2 Insert two AAA R03 or UM 4 dry batteries Make sure that the batteries are inserted with their positive O and negative poles positioned correctly 3 Close the cover Precautions Concerning Batteries e Be sure to insert the batteries with correct positive and negative polarities e Use batteries of the same type Never use different types of batteries together e Either rechargeable or non rechargeable batteries can be used Refer to the precautions on their labels e When the Remote Control is
20. l power supply e The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc Make sure there is at least 20 cm of space above and at least 5 cm of space on each side of the unit e Do not place this unit close to strong magnetic field e Do not place the unit on the amplifier or receiver e Don t place this unit close to the damper or the moisture will affect the life of the laser head e lf the system is brought directly from a cold to a warm location or is placed in a very damp room moisture may condense on the lens inside the player Should this occur the system will not operate properly Remove the disc and leave the system turned on for about an hour until the moisture evaporates e To keep the laser pickup clean do not touch it and always close the disc tray e Should any solid object or liquid fall into the system unplug the system and have it checked by qualified personnel before operating it any further e Do not attempt to clean the unit with chemical sol vents as this might damage the finish Use a clean dry or slightly damp cloth e When removing the power plug from the wall outlet always pull directly on the plug never yank on the cord e Depending on the electromagnetic waves used by a television broadcast if a TV is turned on near this unit while it is also on lines might appear on the TV screen Neither this unit nor the TV are
21. layback control turn on off PBC For USB data disc playback switch between folder file list program list 30 ENTER Confirm a selection 31 gt Pe Navigate right through menus Search forward within a track disc Tune to a radio station by searching forward 32 ZOOM Zoom in out image on screen 33 SUBTITLE Select a subtitle language during video play 34 INPUT Select AUX MP3 LINK OPTICAL or SCART function 35 TUNER Select TUNER function 36 DIM Adjust brightness level of display panel 3 AUDIO Select a audio channel during video play Connections Connect to FM Antenna Connect the supplied FM wire antenna to the FM antenna socket on the unit If reception is poor connect the outside antenna Note Before attaching a 75 ohm coaxial lead the kind with a round wire going to an outside antenna disconnect the supplied FM wire antenna Caution To avoid noise keep antennas away from the system the connecting cord and the AC power cord Connect to TV IMPORTANT You only need to make one video connection from the following options depending on the capabilities of your TV Note Connect the DVD system directly to the TV TV Input Using COMPONENT socket Connect a progressive scan TV through component video for higher qua
22. lity video Connect component video cables red blue green not supplied to The VIDEO OUT Y Pb Cb Pr Cr sockets on this unit The component video input sockets on the TV Note The progressive scan video quality is only available when a progressive scan TV is connected If you TV does not support progressive scan you cannot view the picture For how to activate progressive scan on your TV refer to the TV user manual The component video input jack on the TV might be labeled as Y Pb Pr or YUV 2 Using AV OUT socket Connect audio cables to The AUDIO OUT R L sockets on this unit The audio input sockets on the external audio device Connect the composite video cable to The VIDEO socket on this unit The video input socket on the TV 3 Using SCART OUT socket Connect the SCART cable to The SCART OUT socket on this unit The corresponding Scart input jacks on the TV 4 Using HDMI socket Connect HDMI High Definition Multimedia Interface DVI Digital Visual Interface or HDCP High bandwidth Digital Contents Protection compliant TVs through HDMI for the best picture quality This connection transmits both video and audio signals Through this connection you can watch DVDs that contain HD High Definition content Note Some TVs do not support HDMI audio transmission Connect an HDMI cable to the HDMI socket on this unit the HDMI socket on the TV Note If your TV has only a DVI connecti
23. malfunctioning If you see such lines keep this unit well away from the TV set Do not move the unit during playback During playback the disc rotates at high speed Do NOT lift or move the unit during playback Doing so may damage the disc or the unit When moving this unit When changing places of installation or packing the unit for moving be sure to remove the disc and return the disc tray to its closed position in the player Then press the power switch to turn the power off and disconnect the power cord Moving this unit with the disc loaded may result in damage to this unit Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DIGITAL This unit includes this label The type plate is located on the rear of the unit Identifying the Parts Main Unit fo a SE e O um qua O O O S SEE Oo do 6 Back View Panel View 0000 B D D Back View 1 2 HDMI Socket Connect to a TV AUDIO OUT Terminal Connect to a TV VIDEO Terminal Connect to a TV OPTICAL Terminals Connect to a digital amplifier AUX IN Terminals Connect to an external audio device FM Antenna Socket Connect to a FM Antenna AC Power Cord Connect to power COMPONENT Socket Connect to a TV SCART OUT IN Socket Connect to a TV Panel View J 9 d
24. on connect through a HDMI DVI adaptor An extra audio connection is needed to complete this connection Connect to an External Audio Device You can also listen to an external audio device through this unit DVD Player Audio Input OPTICAL SCART IN 4 4 MIXR MIXL OPTICAL SCART IN External Audio Output 1 Using AUX IN socket Connect audio cables to the AUX IN sockets on this unit the audio output sockets on the external audio device 2 Using OPTICAL socket Connect a optical cable to the OPTICAL socket the digital input socket on the digital recorder Note Mute function is invalid in this mode Connect to Other Devices Listen to an Audio Player You can listen to audio player through this unit Connect the audio player For audio players with RCA audio output sockets Connect audio cable to the AUX IN L R sockets and to the audio output sockets on the audio player For audio players with headphone sockets Connect the MP3 Link cable to the MP3 LINK socket and to the headphone socket on the audio player Press the AUX MP3 LINK button to select the AUX source or MP3 Link source Start to play on the audio player Connect Power Caution Risk of product damage Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit Before connect
25. press the ENTER button PAL For TV with PAL color system Auto For TV that is compatible with both NTSC and PAL multi system NTSC For TV with NTSC color system 5 To exit the menu press the SETUP button Change System Menu Language 1 Press the SETUP button 2 Select General Setup Pagel 3 Select OSD language and then press the gt button 4 Select a setting and then press the ENTER button 5 To exit the menu press the SETUP button Set the Clock The built in clock shows the correct time in the display 1 In standby mode press and hold the CLOCK button to activate the clock setting mode hour indicator will blink 2 Setthe hour with the A button or Y button 10 3 Press the ENTER or CLOCK button to confirm minute indicator will blink 4 Set the minute with the A button or Y button 5 Press the ENTER or CLOCK button to confirm the built in clock starts operating and the seconds start counting from 0 Note The operating time of every step shouldn t be longer than 10 seconds or it will return to the original display If there is a power failure or the power system is turned off the clock will lose its setting To confirm the clock time When you press the CLOCK button the clock time is displayed Wait for a few seconds until the display returns to the original display Adjust Volume Level During play press the VOL buttons to increase decrease the volume level
26. pter number For the Disc time Track time Title time Chapter time enter the play position in hours minutes and seconds Play starts automatically at your selected point For Repeat Audio Subtitle Angle fields you can select one repeat mode audio mode subtitle language view angle for play For the Display field you can select one mode to view the information of disc time Resume Video Play From Last Stopped Point e In stop mode and when the disc has not been removed press the EI button To cancel resume mode and stop play completely e n stop mode press the E button Note This feature is only available for DVD VCD play Play Options Display Play Information e During play press the OSD button repeatedly to display play information Program e For video discs audio CDs 1 During play or in stop mode press the PROG button to access the program menu Enter the tracks chapters to add to the program Repeat step 2 until the program is completed Select Start then press the EI button to play the program KW DP 12 e For MP3 WMA Files During play or in stop mode select a file then press the PROG button to add the file to the program list Repeat steps 2 until the program is complete Press MENU to display program list then select program file Press the ENTER button to play the program To delete a file from the Program List Press the MENU button until the program list is displaye
27. the previous next file press the Lake buttons 6 Press MENU button repeatedly to switch between filelist folder and program list Play MP3 WMA Picture Files You can play MP3 WMA picture files copied onto a CD R RW recordable DVD or USB device 1 Insert a disc or connect a USB device 2 Press DISC USB to select a source 3 Press the A Y buttons to select a folder then press the ENTER button to confirm 4 Press the A Y buttons to select a file from the folder 5 Press the H button to start play To stop play press the E button TO pause or resume play press the HH button To skip to the previous next file press the 1 lt lt gt PI buttons Play Control Select repeat play options e During play press the MODE button repeatedly to select a repeat option play mode Repeat A B DVD VCD CD MP3 WMA 1 During music or video play press the A B button at the start point 2 Press the A B button at the end point The selected section starts to play repeatedly To cancel repeat play press the A B button again Note The section A and B can be setted only within the same track title Search Forward Backward e During play press the ak buttons repeatedly to select a search speed To resume play at normal speed press the EE button Search by Time or Chapter Track Number During the DVD VCD playback press the GOTO button to access quick menu For the Track Title Chapter field enter the track title cha
28. to turn on the HDMI CEC function Off Select this when you do not use the HDMI CEC One Touch Play On Press button to turn on this product TV if the TVsupports one touch play will turn on automatically and switched to the correct video in channel If a disc is loaded in this product disc play automatically starts Except CD Off Select this to turn off one touch play function One Touch Standby When you press and hold amp button all the connected HDMI CEC devices if the device supports one touch standby swith to standby mode simultaneously On Select this to turn on one touch standby function Off Select this to turn off one touch standby function Note If no display appears on the TV screen due to unsupported resolution reconnect any available interlace video output to your display and re adjust the resolution settings to 480p 576p Preference Page Notes You can t set TV type until HDMI is setted to off TV Type Pal Select this when the unit is connected to a PAL TV Auto Select this when the unit is connected to a Multi TV Ntsc Select this when the unit is connected to an NTSC TV PBC Turn on or off the content menu of VCD SVCD with PBC playback control feature on Display the index menu when you load a disc off Skip the menu and start play from the first title Audio Subtitle Disc Menu You can select a preferred language for audio subtitle and disc menu
29. ton Use the Disc Menu When you load a DVD S VCD disc a menu may be displayed on the TV screen e To access or exit the menu manually Press the MENU button e For VCD with PlayBack Control PBC feature version 2 0 only With the PBC feature you can play VCD interactively according to the menu screen During play press the MENU button to enable disable PBC When PBC is enabled the menu screen is displayed When PBC is disabled normal play is resumed Select an Audio Language You can select an audio language on DVDs video e During disc play press the AUDIO button The language options appear If the selected audio channels is unavailable the default disc audio channel is used Note For some DVDs the language can only be changed from the disc menu Press the SETUP button to access the menu 11 Select a Subtitle Language You can select a subtitle language on DVDs discs e During play press the SUBTITLE button Note For some DVDs the language can only be changed from the disc menu Press the SETUP button to access the menu Play from USB 1 Insert the USB device 2 Press the DISC USB button to select the USB source 3 Press the A Y buttons to select a folder then press the ENTER button to confirm 4 Press the A Y buttons to select a file from the folder 5 Press the B EE to start play To stop play press the E button TO pause or resume play press the B Hl button To skip to
30. ts are required to be set when you first use the system 1 Press the SETUP button 2 Press the 4 buttons to select a setup page 3 Pressthe A Y buttons to select an option and then press the gt button 4 Press the A Y buttons to select a setting and then press the ENTER button To return to the previous menu press the lt button To exit the menu press the SETUP button General Setup Page TV Display The shape of the television or monitor may not match the shape of the movie frame To avoid distortion on older televisions you may need to change the way in which the image is displayed Televisions use a 4 3 aspect ratio high definition televisions use 16 9 aspect ratio as do movies Note You may need to read your television s manual in conjunction with this section in order to achieve the best results Some discs do not allow the aspect ratio to be changed and you will therefore have to change the aspect ratio on the TV Make this setting while playback is stopped you cannot do this while playing back a disc NORMAL PS This mode is used with 4 3 televisions 4 3 images are displayed normally When showing 16 9 programmes the full height of the screen is displayed and the left and right part of the image are cut off NORMAL LB This mode is used with 4 3 televisions 4 3 images are displayed normally 16 9 images are visible at their full width but there are blank area at the top and bottom of the screen
31. with the A button org button 4 Press the ENTER or TIMER button minute indicator will blink Set the minute with the A button or Y button 5 Press the ENTER or TIMER button or ENTER button the selected time is set 6 Set the daily timer to ON daily timer set is in effect or OFF daily timer set is to cancel with the A button or Y button Note The operating time of every step shouldn t be longer than 15 seconds or it will return to time display e To confirm the daily time Press the TIMER button in standby mode the daily time is displayed Wait for a second until the display returns to the time display e To cancel the daily timer setting In standby mode repeatedly press the TIMER button until the ON will display then you can set the daily timer to OFF by pressing the A button or Y button the daily timer will be cancelled Turning off the system also cancels the daily timer Set the Sleep Timer Use the sleep timer to turn the system off after a certain number of minutes when in play mode By setting the sleep timer you can fall asleep to music and know that your system will turn off by itself rather than play all night 1 Play a disc or tune in to the desired station 2 To setthe sleep timer by press the SLEEP TIMER button repeatedly select a set period of time in minutes The unit turns off automatically after the set period of time Troubleshooting To keep the warranty valid nev

Vieta-VH

Contents

Download Pdf Manuals

Related Search

Related Contents