PIPELINE & DRAIN INSPECTION SYSTEMS WITH DVR FEATURE
Contents
1. WD System Set Up 1 IMPORTANT When connecting the Camera to the Monitor the power must be off or both units will be damaged 2 Screw the Camera to the Wheel Cable See Figure1 A amp Connect the Wheel to the Monitor See Figure 1 3 Plug the Power Adapter cord into the wall AC socket and other end into the DC 12V Input Jack Power Adapter Optional or plug the cord from the Battery Box into the DC 12V Input Jack See Figure1 4 Turnon the POWER Switch on the front of the Monitor 5 Gently lower the Camera into a pipe duct etc and reel out the Cable until it is at the desired depth 6 Record the pictures if you need see DVR Operating 7 Video Out By a video cable you can transfer the picture to other larger Screen 8 When finish carefully remove the Camera from the pipe duct etc clean it with a clean soft and dry cloth then put the Camera into the previous position Figure 1 SKID AND CAMERA MOUNT CABLE TRAY CONDITION DVR operation 1 Set Screen AV Button on Video 2 2 Take off the isolation sheet from the Remote Control Battery 3 Press the Remote Control Button 5 to Power the Recording system you can see DVR power LED turn on amp PLAY VIDEO manual on the screen 4 Insert your SD flash or removable hard disc etc to the SD Port you will see SD CONNECTED on the screen the SD LED light on 5 Press Remote Control Button to start the reco2. L CHARGE LED CHARGE SWITCH B Figure 2 REMARK TOTAL POWER 14 W LITHIUM BATTERY 12 V DC MAX 4 5 AH CHARGER 12 9 V 1A CHARGE TIME 5 HOURS WORK TIME 2200 MINUTES PROTECTIVE VOLTAGE 8 1V THE VOLTAGE BEFORE DISCHARGING 12 6 V LOAD CURRENT 1100 MA INPUT 12 2 V
3. PIPELINE amp DRAIN INSPECTION SYSTEMS WITH DVR FEATURE ASSEMBLY AND OPERATING INSTRUCTION Read these instructions completely before operating this system Specifications Save this Manual Attention 1 Read the user manual carefully before using this system 2 Avoid using the device in extremely cold heat or humidity environment it may damage the device 3 Do not drop or press hard on the device 4 Warranty avoid if the device is opened by users or has physical damage 5 Always back up your date before connecting your SD device to this system The manufacturer is not responsible for any date damage on your SD device for any reason 6 Do not disconnect the unit while recording or playing It may damage the unit or the SD device Attention WITH AUTO BALANCE CAMERA FOR PIPELINE amp DRAIN INSPECTION WATER SUPPLY WASTE WATER ELECTRICAL AIR CONDITION CABLE DUCTING DUCTED VACUM SYSTEMS IN BUILDING Know Your Tool eee 00 0200 RECEIVER AV BUTTON LIGHTS CONTROL MENU SELECTOR Ve POWER SWITCH 8 DC IN 9 DC OUT 10 VIDEO IN AV2 11 VIDEO OUT 12 CAMERAAV 1 13 SD DEVICE 14 DVR DEVICE 15 SUNSHADE 16 RECHARGEABLE BATTERY Camera 1 WHITE LEDS 2 LENS 3 SPRING 4 SKID Cable wheel COUNTER BOX METRIC amp IMPERIAL BUTTON RESET BUTTON CABLE TRAY FEMALE PLUG BRACKET CABLE WHEEL NOOR
4. rding amp the RECORDING LED light turn on 6 Press Remote Control Button 7 to stop the recording 7 Press Remote Control Button 1 to review the recording 8 If youneed to manage your recording pictures press Remote Control Button 4 also you can do this files management by electing the SETTING on PLAY VIDEO manual on the screen Schedule recording User can schedule a recording in advance Simply enable the schedule recording in the SETUP Then the unit will ask user to setup timing See chapter 6 for more details Recording schedule can be used User has to set up schedule again for next recording Recording to SD device The unit is able to record video into SD devices such as SD hard disk The recorded video will be stored in the SD devices and played back on the TV screen Recording format The default recording resolution is 640 480 which takes about 500MB hour User may select 320 240 to save storage space Video play User can use on screen menu to enter play video mode The unit will display the recorded video and other compatible videos inside SD device It will not list the non compatible videos Select the video file When user enters play video mode the set will display all of the available video files on TV screen User will use button to select desired video and press to play Press and hold or vw button to go to previous or next video Use button to star
5. t or pause the playing Use STOP button to stop or go back to previous menu The screen will display loading please wait for few seconds before playing video Fast forward and rewind User can usep gt the remote control to fast forwarding or rewinding 1 2 4x or 8x speed Always press button to go back normal playing Compatible video format Divx3 11 Divx4 Divx5 MPEG1 MPEG2 MPEG4 MPEG4 video file format avi m4v MPG MPEG Note video does not support many downloaded video System setup User can select different standard recording and other features during the setup Also user can upgrade the unit firmware or restore to factory setting Recording setup Video standard PAL or NTSC default NTSC Resolution 640 480 480 360 720 480 and 320 240 default 640 480 Compression rate 1000 1200 1500 1800 2100 2500KB S default 1000kb s Sample frequency 24 32khz default 32khz Schedule recording on off default off Recharge Assembly drawing and parts list 1 Plug the AC cord into wall AC socket amp insert the other end into the Battery Box AC jack See Figure2 A 2 Press down the charge switch See Figure2 B 3 Charge LED will be Red during charging amp turn to be Green when finish charging 1 AUTO BALANCE PICTURE CAMERA normally charging time 5 6 hours A AC CORD SKIDS 3PCS CONNECT CABLE 1 5M 3M 5M C DC 12V POWER ADAPTER OPTIONA
Download Pdf Manuals
Related Search