"user manual"
Contents
1. Robe X1 FT PRO USER MANUAL FT series Version 1 1 ROBE Lighting s r o e Czech Republice www robe cz m Table of contents 0 NOOTRO ND Introduction Safety information Unpacking ANG IRSDECUONi wiza cd ieh Product overview Setting Up 11 Operation Service and maintenance id Technical specifications Robe X1 FT PRO 1 Introduction Thank you for choosing the ROBE X1 FT PRO You now own a rugged and powerful state of the art machine Prior to use we suggest that you carefully read all of the instructions By following the suggestions found in this user manual you can look forward to the reliable and satisfactory performance of your ROBE X1 FT PRO machine for years to come Please follow these operation safety and maintenance instructions to ensure a long and safe life for your machine 2 Safety information Please read the following safety information carefully before operating the machine This information includes important safeguards about installation usage and maintenance Pay attention to all warning labels and instructions in this manual and printed on the machine Keep this device dry Always connect to a grounded circuit to avoid risk of electrocution Before connecting machine to power always check voltage indicate on machine match to your local AC voltage2. Do not use the machine if AC power voltage does not match Disconnect the machine from AC power before servicing and when not in use This product is for indoor use only Do not expose to rain or moisture If fluid is spilled disconnect AC power and clean with a damp cloth If fluid is spilled onto electronic parts immediately unplug the machine and contact your local Robe dealer for advice No user serviceable and modifiable parts inside Never try to repair this product an unauthorized technician may cause damage or malfunction to the machine For adult use only Never leave the machine running unattended Installed the machine in a well ventilated area Provide at least 50 cm space around the machine Never add flammable liquid of any kind to the machine Make sure there are no flammable materials close to the machine while operating Only use Robe fluid Other fluid may lead to heater clog and malfunction If the machine fails to work unplug the machine and stop operation immediately Before transporting the machine make sure the fluid tank is completely drained Fog fluid may present health risks if swallowed Do not drink fog fluid Store it securely In case of eye contact or if fluid is swallowed immediately look for medical advice 3 Unpacking and Inspection Immediately upon receiving the machine carefully unpack the carton check the content to ensure that all parts are present and have been received in good condition
3. 6 Operation Control Panel Operation The machine can be operated with the onboard digital control interface Robe X1 FT PRO Ready to Faze oro FS TIMER VOLUME Scroll through setting menu Up Activate Timer function Down Activate Volume function Deactivate Timer Volume function Or to select and memorize the setting Hold 3 seconds to start self cleaning process Control menu Operation Mode XXXX Timer Interval XXX Sec Timer Duration XXX Sec Timer Output XXX Volume Output XXX Fan Speed XXX DMX 512 Address XXX W DMX Power XX W DMX Reset XX Air Pump Sensor XX Run Last Setting XX Select Fog or Faze Mode Set interval time at Timer mode from 1 to 300 seconds Set duration from 1 to 120 seconds Set output volume at Timer mode from 20 to 100 Set output volume at Volume mode from 20 to 100 or continuous output Set fan speed from 20 to 100 or to turn off Fan Set DMX W DMX address from 1 to 510 Turn On Off W DMX function Unlink from a W DMX transmitter Turn On Off Air Pump Sensor Turn On Off run last setting function DMX Connector Pin Assignment The machine provides a 3 or 5 pin XLR connector for DMX connection The diagram below indicates pin assignment information _ Pin Function A MI E En Fa f Y cl E ki e 0 9 a l e 1 Ground KOJ Ne Ray Mis 2 oe 3 Pin XLR SFinXLR 3 Data DMX Operation Making the DMX C
4. If any parts appear damaged or mishandled from shipping notify the shipper immediately and retrain the packing material for inspection Included items 1 x ROBE X1 FT PRO 2 x Power Cord One for Fog Machine the other for Fan 2x Fluid Tank 1x User Manual 4 Product overview of BE sy t Antar Pw pa 4 ja Blue LCD screen Timer mode Volume mode Control Options DMX W DMX XLR 3 Pin DMX Connector XLR 5 Pin DMX Connector Tank Capacity 5 liters Neutrik PowerCon v 5 Setting Up Step 1 Place the machine on a flat surface and in a suitable large area with at least 50 cm open space around the machine Step 2 Fill the fluid tank with Robe approved fluid Step 3 Connect the machine to suitable rated power supply To determine the power requirement for the machine refer to the label on the back of the machine Always connect the machine to a protected circuit and ensure it is properly grounded to avoid risk of electrocution Step 4 Turn on the machine and allow it to heat up Heat up takes approximatly 6 mintues Once the machi ne has reached operating temperature the display will show Ready to Fog Now the machine is ready for operation Step 5 To start making fog press the VOLUME button on the control panel Step 6 To turn off the machine hold the STOP button for 3 seconds the machine will automatically run a self cleaning process and shut off after the process is done
5. o DMX signal Transmitter link lost or linking to transmitter BE ame sens 8 Technical specifications Input voltage Power Consumption Warm up time Fluid tank capacity Maximum Fluid consumption Recommended Fluid Control options DMX channels Power connection DMX data connection Dimension Dry weight 110 120V 60Hz or 220 240V 50Hz 1650 W 230V 6 minutes approx 5 Liters Fog Mode 140 ml per minute Faze Mode 28ml per minute Robe water based fog fluid for the best effect LCD Menu DMX 512 Wireless DMX Adjustable output volume and fan speed 3 channels Neutrik PowerCON 3 pin and 5 pin XLR L710xW412xH 710mm 52 5kg The wireless DMX Reciver CRMX from Lumen Radio is an optional accessory only Optional accessories Upgrade kit CRMX Universal FT P N 99030204 November 30 2015 Specifications are subject to change without specification
6. onnection Connect the machine to a DMX controller or to one of the machines in the DMX chain The machine uses a 3 pin or 5 pin XLR connector for DMX connection the connector is located on the front of the machine Address Setup Use control menu to set DMX address The machine occupies 3 control channels The starting address is defined as the first channel from which the machine will respond to the controller Always double check to make sure there are no overlapping channles in order to control the machine correctly DMX chart Channel Value Function Type of control Mode selection l 0 127 Faze Mode step 128 255 Fog Mode proportional Faze fog Output 2 0 5 Output Off step 6 255 Output 21 100 proportional Fan 3 0 5 Fan speed at 20 step 6 255 Fan speed 21 100 proportional 7 Service and maintenance Do not allow the machine and fluid to become contaminated Regularly fill distilled water to fluid tank and run the machine to clean the system After cleaning refill Robe fog fluids into fluid tank and make sure machine can produce fog properly It is recommended to run the machine on a monthly basis in order to achieve best performance and output condition Excessive dust liquid and dirt built up will degrade performance and cause overheating Status of W DMX connection Symbol on the Liquid Crystal Display Status of W DMX connection Transmitter assigned DMX signal received Transmitter assigned N
Download Pdf Manuals
Related Search