Funfetti Quick Reference Guide Rev. 1 Multi-Language
Contents
1. Funfetti Quick Reference Guide Funfetti QRG EN About This Guide The Funfetti Quick Reference Guide QRG contains information about the product s connection mounting and operation Disclaimer The information and specifications contained in this QRG are subject to change without notice Safety Notes These Safety Notes include important safety information about installation usage and maintenance A Contact Always connect this product to a grounded circuit to avoid the risk of electrocution Always disconnect from the power source before cleaning this product Never disconnect this product from power cord by pulling or tugging on the cord If mounting this product overhead always secure it to a fastening device using a safety cable Do not mount this product on or near a flammable surface Never aim the cannon at people or animals Never look directly into the cannon Make sure the voltage of the outlet to which you are connecting is within the range stated on the decal or rear panel of the product This product is for indoor use only IP20 To prevent risk of fire or shock do not expose this product to rain or moisture Always install this product in a location with adequate ventilation at least 20 in 50 cm from adjacent surfaces Be sure that no ventilation slots on the unit s housing are blocked Do not intentionally obstruct the air vents or leave machine unattended Never connect thi2. blower fan immediately Press buttons again to shut off e The display will show d 1 while in this standalone mode i e Set your DMX before loading Funfetti refills e The fan will blast confetti up to 30 ft 9 m and run for 25 seconds FC W Wireless To trigger the Funfetti using the FC W wireless remote control plug in the Remote Control product and do the following 1 Plug the wireless receiver into the Wireless Remote port on the side of the FunfettiTM 2 On the wireless transmitter press the button assigned to CH 1 1 4 and the FunfettiTM fan turns on For more information on the FC W or to download instructions go to http www chauvetlighting com product manuals literature Funfetti QRG EN DMX Linking The Funfetti works with a DMX controller Information about configuring Funfetti for DMX operation is in the User Manual which is available from the Chauvet website http www chauvetlighting com product manuals literature Information about DMX is in the DMX Primer which is available from the Chauvet website http www chauvetlighting com downloads Starting Address To ensure full access to all channels in each DMX mode the highest recommended DMX address for this product is 512 Control Panel Button Function Description lt MENU gt Exits from the current menu or function Navigates upwards through the menu list or increases the numeric value SED when in a function lt DOWN gt Navigates
3. angle to keep the confetti from pouring out prior to launching AC Power This product has a voltage specific power supply that can work with an input voltage of 120 VAC 60 Hz or 230 VAC 50 Hz Fuse Replacement I Disconnect the product from power 2 Wedge the tip of a flat head screwdriver into the slot of the fuse holder 3 Pry the safety cap out of the housing 4 Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same type and rating 5 Re insert the fuse holder and reconnect power i Disconnect the product from power before replacing the fuse Funfetti ORG EN Operation 1 Fill the main tube with Funfetti refills FRC FRM and FRU sold separately Note The use of CHAUVET Funfetti refills specially manufactured for use with Funfetti launchers is recommended The standard tank capacity is 0 5 Ib 0 25 kg for FRC and FRU 1 Ib 0 45 kg for FRM Plug into a suitable power outlet Turn on the Funfetti by one of the following e Pressing the lt MENU gt and lt ENTER gt buttons at the same time aor e Using DMX activation e Pressing the button assigned to CH 1 on the FC W wireless remote control Note To refill the Funfetti launcher turn off the launcher and add more Funfetti refill to the main tube Control from the press the lt MENU gt and lt ENTER gt buttons at the same time This will Display activate the Funfetti
4. downwards through the menu list or decreases the numeric value when in a function lt ENTER gt Enables the currently displayed menu or sets the currently selected value into the selected function SI ANS lt MENU gt lt UP gt lt DOWN gt lt ENTER gt Menu Map Main Function Programming Levels Description DMX Address Addr d 1 512 Sets the DMX address DMX Assignments 1 Channel Channel Function Value Setting i 0005009 010 lt gt 255 On Funfetti QRG Technical Specifications Dimensions Length and Weight 11 2 in 284 mm 9 in 228 mm Width 21 8 in 553 mm EN Weight 13 6 Ib 6 2 kg Note Dimensions in inches rounded to the nearest decimal digit Tank Capacity Standard Confetti FRC 0 5 Ib 0 25 kg Launch Duration 25 Seconds Parameters Power Power Supply Type Voltage specific Parameter Consumption Operating current Fuse Power I O Power Cord plug DMX I O Connectors 3 pin XLR Maximum External Temp 104 F 40 C Thermal Product Name Ordering Funfetti Mirror Confetti FRM 1 0 Ib 0 45 kg Throw Distance 30 ft 9 m Range 120 VAC 60 Hz or 230 VAC 50 Hz 120 V 60 Hz 1 380 W 12A F15A 250 V US Canada Edison US Connector Type Sockets Cooling Fan Assisted Convection Item Code 120 V 05070918 230 V 05070933 UV Confetti FRU 0 5 Ib 0 25 kg Coverage Area 540 ft 50 m Voltage Selection Fixed voltage 230 V 50 H
5. other issues such as missing components or parts damage not related to shipping or concealed damage file a claim with Chauvet within 7 days of delivery For information on contacting Chauvet see the Contact Us section of this QRG The Funfetti is an electric confetti launcher perfect for concerts parties or special events Featuring DMX or wireless remote control this simple to set up launcher requires no CO and comes with a double bracketed yoke for easy floor standing or hanging Fits nicely in the CHS 50 VIP Gear Bag by Chauvet Main Tube LED Display Wireless Remote Port Menu Buttons Power In DMX In Out Overview KN Tilt Adjustment Knob 0000000000000000 000000000 00000000 0000000000000000 0000000000000000 0000000000000000 Fuse holder Mounting Bracket Funfetti QRG EN Mounting Before mounting this product read the Safety Notes Place launcher on a flat level surface using the double brackets provided or use a clamp to mount to truss systems such as TRUSST Always use at least one safety cable to secure to rigging DR that the launcher is not shooting directly into anyone s face or above heavy traffic areas Safety Cable such as CH 05 from Chauvet Mn FE i Ye O ee Mounting Diagram Mounting Clamp such as the CLP 15N 7 5 from Chauvet Overhead Mounting Floor Mounting When mounting overhead be sure to point Funfetti at an upward
6. s product to a dimmer Never carry this product from the power cord The maximum ambient temperature is 104 F 40 C Do not operate this product at higher temperatures In the event of a serious operating problem stop using the unit immediately Never try to repair this product Repairs performed by unauthorized technicians can lead to damage or malfunction Please contact the nearest authorized technical assistance center To eliminate unnecessary wear and improve its lifespan during periods of non use completely disconnect the product from the power via the breaker or by unplugging it From outside the U S UK Ireland or Mexico contact the distributor of record to request support or return a product From inside the U S UK Ireland or Mexico use the information in Contact Us at the end of this QRG Funfetti ORG EN What ls e FunfettiTM e Power Cord Included FC_W Wireless Receiver e Warranty Card e FC W Wireless Transmitter e Quick Reference Guide To Begin Carefully unpack the FunfettiT M and check that all the parts are in the Description package and are in good condition If the box or any of the contents appear damaged from shipping or show signs of mishandling save all packaging and file a claim with the carrier immediately Do not notify Chauvet Failure to report damage to the carrier immediately or failure to have all packaging available for inspection could invalidate your claim For
7. z 1 430 W TA F 7A 250 V UK Worldwide Local plug Channel Range 1 UPC Number 120 V 781462212667 230 V 781462212810
Download Pdf Manuals
Related Search