Home

Digital Satellite Receiver

image

Contents

1. 8 4 3 Manual Search 9 4 4 Motor Setting 9 4 5 Factory Default 9 5 Preferences 10 5 1 System Options 10 5 2 AV Setting 10 5 3 Video Adjust 10 5 4 Time Setting 11 5 5 Timer a g 11 5 6 Parental Control n 222 Es sas nn RES se ES BSK s SK SSR RES NNE 11 5 7 About Receiver sounds esse MENES eee eee 11 6 Channel Manager 11 6 1 Edit Channels 12 6 2 Set Favorites nnn nnn nn nnn nnn nnn nnn nnn nnn 12 USER S Manual 7 General Viewing Function 13 7 1 Channel List 13 7 2 Select Channel nnn nnn nnn nnn nen ncn nnn 13 7 3 Recall 13 7 4 TV RADIO Mode 13 7 5 Channel information 13 7 6 Favorit
2. PALCOM Digital Satellite Receiver DSL 160 Cl Keep this manual for future reference USER S Manual IMPORTANT SAFETY INSTRUCTIONS Thank you for choosing our product Before installation we would like to remind you of some notes which is very important for operating safely and properly as follows 1 Be sure to read this user manual before starting your operation 2 Never open the cover It is very dangerous to touch the inside stuff of the unit due to possible electric shock 3 If you don t use this unit for long time please pull the power plug out from the outlet Do not use a damaged power cord 4 Do not touch the power with wet hands If there is liquid flow into the unit pull out the power cord immediately because it may cause fire or electric shock 5 Place the unit in a well ventilated and no heat environment 6 You must install the dish with correct direction and angle If the dish is not working properly contact your local dealer 7 Install the unit horizontally Unbalanced installation may cause the unit to be damaged by itself 8 When the unit is suddenly moved to a hot area from a cold area it may cause some problems In that case turn off the power and turn on again after 1 2 hours 9 Install the unit in a place with good ventilation suitable temperature no direct sunrays low humidity low vibration influence 10 Do not put heavy objects on the unit PART I This mark consists of two Graphical Sy
3. Volume Up 1 4 Rear Panel WER LNB IN LNB signals input LOOP OUT LNB signals loop out LAUDIO L Connect to the left audio channel for TV AUDIO R Connect to the right audio channel for TV VIDEO Connect to the video channel for TV SPDIF SPDIF audio output coaxial Caution the item is fixed COAXIAL Spdif audio output coaxial S Video S Video signal for TV RS 232 Upgrade software connect to PC or another STB TV SCART output for TV 10 VCR SCART output for VCR 11 100V 240V 50 60Hz Connect to 100 240V voltage 50Hz range AC power USER S Manual 1 5 RCU 3 0000 OOO o Oe 0000 809 A EE TI 90 99 0 Je KEY FUNCTION Power ON OFF the STB When watching a channel mutes the sound Keys to enter the channel s no 0 9 MENU Show main menu on screen or jump back to previous menu in sub menu setting conditions EXIT Escape from present menu and save the settings CHAY Channel change or move cursor down up VOL 4 gt Volume control or more cursor left right OK Confirm the selected item in the menu screen or show the Channel list SAT Display the satellite list which has been searched FAV Display the favorite channel list EPG Show EPG Electronic Program Guide oA Switch between TV and Radio mode TV AV Reservation pii Pause the ongoing Video and Audio 2 To jump back to the previous channel
4. Receiver Weight 1 5kg Receiver 80g RCU USER S Manual 12 Trouble Shooting Problem Possible Causes CausesWhat To Do No display light up on front panel Power cord is not well plugged Check to make sure power cord is plugged properly into power socket No soun or picture but the front panelred light is ON The unit is in standby mode Press the standby button No sound or picture The satellite dish is not pointing at the satellite No signal or weak signal Adjust the dish Check the Signal Level in the Antenna Setup menu Check the cable connections LNB and other equipment connected between the LNB and the receiver and or adjust the dish Bad picture Blocking error No picture Video The satellite dish is not pointing at the satellite Adjust the dish Signal is too strong Connect a signal attenuator to the LNB input Satellite dish is too small Change to a larger dish LNB noise factor too high Change to an LNB with lower noise factor The LNB is faulty TV is notin AV EXIT mode Change the LNB Check the UHF channel fixed in your system and tune the UHF channel properly There is interference on your digital satellite channel The system is connected using RF cable and the output channel of the receiver interferes with an existing terrestrial channel or Video signal Change the receiver output channel to a mor
5. you ve viewed INFO Shows current channel s information AUDIO Select the Audio language Caution only for multi audio channel type chosen AUDIO R L Select Audio output type L R L R SWAP EH Show Teletext in current program P P Turn page forward or backward PAL NTSC Shift TV Mode PAL NTS or AUTO POSITION Reservation UHF Reservation USER S Manual 2 Installation of STB Please find relevant reference of installation described as below When connecting new equipment to the STB be sure checking first related instructions for the proper way of installation 2 1 Connecting to Antenna and TV Seperated A V LNB IN INPUT AC 100240V IO 50 60Hz lt 20W C be CAUTION ial A Fal a Q gef na QO ce CTR H ven OFF ON SPPIF s vipeo POWER AMP DIGITAL OUTPUT COAXIAL 3 Menu Information After installing the STB and power on the main menu will be displayed which consists of 4 menu items as shown below Channel Manager Installation Preferences e Game e Common Interface During the installation the OK Key ConfirmsAselectionand av key shows the list Box You can also use the numeric keys on the RCU to enter a numeric value for watching TV Use theav keys to move up or down from one line to another line Use the av keys to move the cursor up or down in the sub menu To escape the me
6. e List SS nn nnn nnn nnn nner nnn 14 7 7 Volume additional Control 14 7 8 SAT 14 7 9 Zoom Function 15 7 10 PIG Picture In Graphic 15 8 Common Interface 15 9 Game 16 10 EPG Electronic Program Guide 16 11 Technical Specification 17 12 Trouble Shooting 19 USER S Manual 1 General Information The Digital Set Top Box allows you to view digital satellite programmes This User s Manual covers the installation of the STB and the necessary steps to operate various features It also explains special features available only in this STB in details which will help you to take full advantage of these features 1 1 Main Features Multi Picture Preview Digital Audio with AC 3 support by SPDIF Optional PIG Picture In Graphic support DiSEqC1 2 positioner for multi satellites 63 satellites C Ku band control for each antenna Various channel editing functions fav move lock delete and sort User programmable various satellite amp transponder information O Automatic search for newly add
7. e suitable channel The RCU is not working Out of battery RCU is aimed at wrong direction Change the battery Aim the RCU at the unit and make sure no blocks between the front panel and RCU Note If you still cannot resolve the problem with above reference please contact the local dealer or their after sales service center Email info palcom de Internet www palcom de C 39027892
8. ed transponder Network Auto Search stores up to 5000 channels Easy and fast software upgrade through RS 232 port Timer function automatically turns On Off by setting function daily weekly one time Automatic reserved channel moving system Electronic Program Guide EPG 9 OSD Teletext ETS 300 706 and Subtitle function support VBI teletext support Antenna positioning help feature D Multi video output CVBS RGB 9 Various switch types LNB types and NTSC PAL SECAMmonitor type SCPC MCPC receivable from C Ku band satellite Multi LNB controlled by DiSEqC 1 0 1 1 1 2 and 22KHz switching 256 color On Screen Display DO Automatic PAL NTSC SECAM conversion Automatic last channel saving 1 2 For Your Safety Keep STB placed in clean space with sufficient ventilation Do not cover the STB with or place it on a unit that emits heat Clean the case by a soft cloth with a little washing liquid Do not connect or modify cables when the STB is plugged on Do not remove the cover Do not let the unit exposed to extreme heat cold or humid conditions No liquids or any other materials to come inside of the unit USER S Manual 1 3 Front Panel 1 2 3 4 5 6 7 PALCOM DSL 160 CI 2 POWER Power switch MENU Menu key TV ENTER Confirm user s selection or display the program list on TV screen CHANNEL4 Channel Up CHANNEL el Channel Down VOLUME al Volume Down VOLUME gt
9. ession layer I and II Musicam Audio Outputs Stereo Channel Dual Mono Joint Stereo Mono Video Decompression Main Profile Main Levels With Letter Video buffer 64 Mbits of SDRAM is provided Data rate up to 15Mbits s Max burst rate 228 Mbits s PAL 25 frame 720 x 576 NTSC 30 frame Video output 720 x 480 USER S Manual DATA SERVICE PORT Connector 9 pin D sub female RS232C interface The DSR is seen as the D Data Communication Equipment DCE and the ata protoco PC or other terminal is seen as the Data Terminal Equipment DTE POWER SUPPLY Type Switching mode Main input voltage 100 240VAC 50Hz 60Hz 5 Nominal powerconsumption 20W SAFETY more than 10M2 at 500Vdc ees Ambient conditions of 28 2 amp 70 RH We Voltage Up To O p 3kV 1 Min Temperature Rise oe amp core lt 50 on casting ac 50Hz Safety Standard Designed to meet IEC 9 MICROPROCESSOR Microprocessor CONEXANT Clock frequency 130MHz SDRAM Memory 8Mbyte Flash memory 1M 2Mbyte PHYSICAL CHARACTERSTICS Front Panel Keys 7 Keys Indicators Power on off Remote control input Display A4Digit 7Segment Cl port Two Common Interfaces Rear Panel 1 LNB Input 1 Loop through output 2F type 2 x Audio L R RCA 1 x Video SIGNAL RCA Connectors 1 x RS 232 9 pin D sub male 1x S P DIF or 0 12V Optional 1 SCART Dimensions L W H 280 x 190 x 40mm
10. et up the Date Hour Duration Time at last set up the Status include Once Daily Weekly or Off In order to let the timer work normal you should left the Main MENU before the timer s time is up The time is over the receiver will work on standby 5 6 Parental Control This function allows you to lock the channel with a password in order to prevent children from accessing certain channels Note Default password is 0000 How to change the Password 1 Enter the current password 2 Select ON of Parental Lock 3 Enter new password Confirm your new password entering new password again Warning Please remember the new passwords after setting 5 7 About Receiver You can find STB information like software and hardware information under this menu Channel Manager 6 Channel Manager z This STB provides strong WT channel managing functions USER S Manual 6 1 Edit Channels Press lt gt Key to choose Delete Lock Move Rename Sort functions To manage the existing channels Delete To delete chosen channels from channel list Press OK to choose and Second press to cancel selection AX symbol will be shown in the front of Channel name which is selected to be deleted If you decide to delete the selected Channel press EXIT the system will give you notice Do you want to delete Choose Yes orNo to execute or cancel the deletion Note The deleted channel cannot be recovered unless you search a
11. gain Lock Lock the channel to be access by password The Parental Lock must be set up in advance before using this function Move Press Move select a channel by pressing OK key move the cursor to the place where you want to move the selected channel Press OK again Rename Under rename condition choose the channel you want to rename press OK to confirm A keyboard will show in the screen Use 4AY lt gt to edit the new name Choose OK to confirm Sort You can sort the channels by Alphabet Satellite FTA CAS Channels or Favorite channels Press FAV key to change between TV and Radio channels Radio channels managing has the same operation as TV channels There are some quick function keys provided 6 2 Set Favorites EE Choose favorite channels in the list and confirm by OK key will be marked before the selected channels Press EXIT to save and use FAV key to check if favorite channels have been set Red function Key To set aname of Favorite channel group The name can be entered through the Keyboard shown in the screen after pressing the Red key USER S Manual 7 General Viewing Function The following describes the basic functions of your STB while watching satellite TV or listening to satellite radio While watching the current channel information will be shown on the bottom of the screen if you press the INFO i button on the RCU 7 1Channel List In channel display condition press OK key to
12. ll wanted satellites has been chosen Simply press Blue key to scan all chosen satellites one by one 4 3 Manual Search Satellite Name Choose the satellite you want to see Transponder Use lt gt Toview different TP details and Select the desired Transponder Press OK to active TP list Press lt r for page up down Frenquency amp Symbol Rate Edit the frequency and symbol rate Polarization Select HOR or VER the right Polarization of the transponder Search Type 1 Search FTA only search free to air channels 2 Search CAS only search conditional access channels 3 Search All search all FTA and CAS channels NIT Search Choose On or Off Press OK to start channel scan Red function key to enter LNB settings menu Green function key to delete unwanted transponders Yellow functoin key to access Set PID funation The user can input the fixed PID value move to OK inthe dialogue box by using av then press OK 4 4 Motor Setting Satellite Name choose the wanted satellite first Motor Setup choose between Disable or Enable using keys Move Wa E gt stands for the West and East limitation point for motor After Setting goes down to Limit Setting and change correspond item to Set Save Position 4 5 Factory Default If you want to bring STB back to the factory default condition select Factory Default and press the OK key Then a warning message will be displayed To confirm select OK Warning On
13. mbols and warning message The detailed specifications are as follows CAUTION To reduce the risk of CAUTION electric shock don t remove cover PE DONOT OPEN or back Equipment service and maintenance should be undertaken SHOCK HAZARO DO NOT OPEN only by trained personnel RISQUE DE CHOC NE PAS ENLEVER USER S Manual Packing Accessory List Please check that whether all of following items are included in the package DSL 160Cl Remote Control Unit TwoAAA Size Batteries for remote control AV Line Use s manual Table of Contents 1 General Information 4 1 1 Main Features 4 1 2 For Your Safety 4 1 3 Front Panel 5 1 4 Rear Panel 5 1 5 RCU 6 2 Installation of STB 7 2 1 Connecting to Antenna and TV 7 3 Menu Information 7 4 System Installation 8 4 1 Antenna Setting 8 4 2 Automatic Search
14. n easily view what other channels doing in same time To pressAV Key choose 2 4 6 9 12 or 16 option then press OK to view the picture 8 Common Interface There are two Cis in STB supports Viacess Irdeti Nagra Seca Conax Cryptwork etc The detail information according to your Cl module display as bellow USER S Manual 9 Game There are several games attached in the STB Can be played via remote control 10 EPG Electronic Program Guide STB provides EPG function for you to get access tothe TV Guide or RadioGuide if you are listening to radio channels that will show the titles and other information of the current and next programmes on different channels Caution The information is only available fromthe network to which the channel you are watching USER S Manual 11 Technical Specification TRANSMISSION STANDARDS INPUT DEMODULATION Connector Type 2X F Type 3 8 32UNEF 2A 1 input 1 loop through Input Frequency 950 to 2150 MHz Signal Input level 65 to 25 dBm Band Switch control 22 KHz LNB Supply 13 0 0 5V 18V 0 7 V max 400 mA Demodulation Type QPSK FEC Coding prETS 300 421 Symbol Rate 2 lt Rs lt 45 M baud SCPC MCPC Video output CVBS 75 unbalanced Audio output Left Right 600 unbalanced Level 1 0V rms 2dB into 10k Audio output Left Right 10k unbalanced Level 1 0V rms 2dB into 10k AUDIO VIDEO PROCESSING Audio Decompr
15. nu system at anytime press EXIT key on the RCU USER S Manual 4 System Installation This menu consists of 5 sub menus as shown below e Antenna Setting e Automatic Search e Channel Search e Motor Setting e Factory Default Press AW key to move focus and OK key to confirm selection 4 1 Antenna Settings 1 2 Transponder Choose the TP to search 3 LNB Type Choose the type of your 4 2 Automatic Search Satellite Name Choose the satellite you want to view LNB If you have universal LNB select Universal LNB Freq Low High Freq Enter the proper LNB frequency via RCU or use the KEY PAD displayed by pressing OK key Switches 22K DiSEqC Switch Setting 0 12V optoinal To configure the Antenna with those switches After fix the above settings you can press Red key to enter Automatica Search function or press Green key to enter Manual Search Automatic Search _ Automatic Search function is convienet tool to search mul Satellite in one time Press Ae move to the wanted satellite press OK This satellite will be chosen if you see a tickle appears in the end of the line Green funtion key to add TP into default TP list which is shown in the right part of screen Yellow funtion key allows user to re name the satellite Blue funtion key to begin the automatic channel scan USER S Manual This STB allows to choose and scan several satellites one time in one page s operation After a
16. orite List To create a favorite group list press FAV key on the RCU You can access the next favorite group when you press FAV key again 7 7 Volume additional Control 1 Volume Control To increase or decrease volume use VOL Key onthe RCU or onthe front panel Note STB has 33 volume levels and this can be controlled from the Volume level of your TV 2 Mute To mute the sound press lt p button on the RCU To bring back the normal sound pre X bis key once again 3 Audio Control Press the AUDIO RIL key repeatedly to select one of four possible Audio settings Left Right L R or SWAP Caution SWAP type only for RF modulator type The current audio setting will be displayed in the channel information 4 Language Selection Press the LANG key on the RCU repeatedly to select audio language This is dependent on the transmission of audio signal 7 8 Sat If you searched channels from more than one satellite and want to have achannel list for each satellite press SAT key on the RCU a satellite list will be displayed Select one satellite you want press OK key on the RCU then you will have a channel list of your choice USER S Manual 7 9 ZOOM function Zoom function enable you to enlarge the picture Press OK you will see one frame on the screen Press OK the chosen picture within the frame will be enlarged 7 10 PIG Picture In Graphic This STB offers you 2 4 6 9 12 or 16 pictures in picture functions User ca
17. selecting factory default you will lose all of data and information which was previously installed USER S Manual 5 Preferences Preferences consists of 7 sub menus as follows 5 1 System Options Press OK to enter 5 1 1 OSD Language To Choose language witha keys or Press OK to active the OSD language list and choose the one you need 5 1 2 OSD transparence To Choose transparency with keys or Press OK to active the OSD transparency list and choose the one you need 5 1 3 OSD Timeout To choose the duration of OSD will stay in screen Same operations as above 5 2 AV Setting AV Setting Screen Ratio 4 3 or 16 9 Screen Mode PanScan or Letter Box Monitor Type Auto PAL NTSC SECAM Caution please adjusting the Monitor Type according to the source program video type Video Output CVBS YC RGB Caution YC RGB type is unavailable in KSDS800 series RF Type PAL B G PAL I PAL D K NTSCM RF Channel Fix the number of RF channel 5 3 Video Adjust To adjust Brightness Contrast Saturation and Hue then move to OK in the dialogue box press OK to confirm Caution HUE only for NTSC type USER S Manual 5 4 Time Setting Choose GMT of your local area and fix other items like Year Month Date the STB will get time information automatically from the satellite 5 5 Timer There ten timer in STB you can choose TV or RADIO in Channel Type and detail channel what you want to watch and s
18. view the channel list List of Existing channels will be shown RED function Key to check all channels in different sort type Alphabet Satellite FAV CAS User EPG KEY to choose move focus and FAV Key to change between TV Radio channels 7 2 Select Channel If you want to select channel use CH av key on the front panel or 4V key onthe RCU or numeric keys In addition to the above normal function STB provides more convenient channel change function While watching press OK key on the RCU Achannel list will be displayed on the right side of the screen If you press EXIT key the channel list will disappear To select a channel go up or down this channel list and place the cursor on a desired channel Then press OK key to watch the selected channel If you press key on the RCU the channel list will scroll page by page 7 3 Recall Press Recall on the RCU to move to the previous channel you watched 7 4 TV Radio Mode While Viewinga TV channel press The TV Radio key on the RCU to toggle between TV and Radio modes 7 5 Channel Information Every time you change channels you will receive program information for a few seconds While watching the channel you can see the current channel information at anytime by pressing the Z INFO key on the RCU USER S Manual Note Channel information will be displayed for 6 seconds by default and will disappear You can adjust the display time interval from 1 to 10 seconds 7 6 Fav

Download Pdf Manuals

image

Related Search

Related Contents

水処理施設、港湾施設など 水処理施設、港湾施設など  Rexel Gazelle  ICN 3056/3066 from Index 20 - Andi  User Manual further Languages  Graco 311832D User's Manual  取扱説明書 - 桑野造船  

Copyright © All rights reserved.
Failed to retrieve file