1/3” ccd sony super high resolution color day & night
Contents
1. Currently active menu item is displayed Move by Up Down keys There is sub menu Press Enter key going to sub menu V Indicates the selected menu item Item Displays the current control item you are adjusting Item Disabled menu item or can t adjust 2 Bottom Line Control Bar Exit Exit menu mode Pop up menu rise when configuration changed Overwrite Save the changed data to save area Restore Cancel the changes Read from save area Cancel Return to menu Load Load saved data Default Load default configuration from default area Backup Load saved configuration from backup area Cancel Return to menu Save Save current configuration Save Save current configuration to save area Backup Copy configurations to backup area Cancel Return to menu Back Return to previous menu There are 4 types of configuration area Editing Area No Save Default Read Only Save Area Use on Start Backup Don t Power off while doing Save Load Backup Overwrite CAMERA ADJUSTMENT White Balance 1 ATW Wide Mode No limits in the range of color temperature 2 ATW Indoor Mode Suitable for low color temperature CRS Color Rolling Suppression Mode supported When you select the CRS will be processed in the following order Checking Condition Checking current environment within the range Checking Variation Measure color rolling range during 30 seconds User can stop this action2. Je in amp Out im A Direction Rect Detect object moving From right to enter of area detecting direction of moving out Please don t use as a signal for video recording start In Simple mode is not supported In amp Out of Direction Rect Detect object moving From left to enter of area detecting direction of moving out Please don t use as a signal for video recording start In Simple mode is not supported In amp Out n Direction Rect Detect object moving From bottom to enter of area detecting direction of moving out Please don t use as a signal for video recording start In Simple mode is not supported Move Clockwise Line Event will occur the object moves ina clockwise direction that start around Please don t use as a signal for video recording start Move Conter Clockwise Line Event will occur the object moves in a counter clockwise direction that start around Please don t use as a signal for video recording start Path Event Detect route between two zones Max 10 path detection is possible Disabled zone can not be configured In Simple mode is not supported The result of path event detection can be inaccuracy Output Direction Setup same as zone output configuration 12 Clear All All path combinations clear 2 Env Setup Environment setup Configurations for each PVA f
3. No Need CRS Variation is low No need to use CRS function Force CRS Even if color variation is low use CRS function ATW Range Adjust AWB Range Convergence Shift Adjust AWB target R Variation Represent blue variation B Variation Represent red variation 3 ATW Outdoor Mode Suitable for high color temperature Natural Light 4 Fix Indoor Mode Fixed color temperature 3200 K mode for indoor environment R Adjust red color B Adjust blue color Push Set Tracking WB of current screen and represent R B value Default Restore R B default value 5 Fix FL Mode Fixed color temperature mode for fluorescent lamp environment 6 Fix Outdoor Mode Fixed color temperature 6300 K mode for outdoor environment lt Auto Exposure gt MIN_SHT Minimum shutter speed NTSC 1 60se PAL 1 50sec MAX_SHT Maximum shutter speed 1 100000sec FLC_SHT Flickerless shutter speed NTSC 1 100sec PAL 1 120sec 1 AE Mode Full Auto DC Lens or Video Lens Fix shutter speed to MIN_SHT Manual Lens Operating as shutter mode Fast SHT Fast shutter mode Adjust range 1 250 1 10000 SHT Fix Shutter Fix Mode shutter speed is fixed at a given value If lighting is not enough noise may be increase If lighting is enough using AGC maximum automatically decrease shutter speed 2 UDF Ultra Deep Field Depending on lighting conditions and Motion state automatically adjust AE and
4. Step5 If current fad value is lower than Max fad value stop turning focus ring Step6 Adjust focus ring to be closer to the max fad value 15 3 Lens Select lens DC lens Video lens Manual Lens Iris Speed Only for DC Video Lens Adjust Iris speed If iris speed is too high it can occur AE hunting If iris speed is too low IRIS adjusting operate too slowly 4 LLC Line Lock Control Active only used AC Power Int Internal Ext External If mode is set to Ext Sync Phase can be adjusted 5 Day Night Detection Configuration D N change method Internal Fix Day Fix Night EXT IN Internal Operating DN changing with internal detection algorithm Fix Day Day mode fixed Fix Night Night mode fixed EXT IN Work with EXT IN mode If port input voltage is high DN mode is Night And If port w voltage is low DN mode is Day Burst Select burst signal on off at night mode Delay sec Select Delay time in D N mode changing D N Threshold Configuration for threshold level in D N mode changing Low Mid High User User Mode Difference of D gt N Level and N gt D Level must be more than 2 and D gt N must be less than N gt D D gt N Adjust level that changing point of Day gt Night N gt D Adjust level that changing point of Night gt Day OPD Optical detector value Represent present physical brightness Use Alt Camset N Alt Camset Select camera configuration set to apply in night
5. DNR Normally in low light environment Sens up feature may be missing the movement of objects and High AGC value makes increase the noise UDF function effectively to improve this phenomenon Motion is none Noise removal mode Motion is occured Fast screen update mode 3 Low Light If using UDF function this function being disabled AGC Boost the signal and adjusting the brightness Off Low Mid High Sens Up By summing multiple fields adjusting the proper brightness in low light conditions 2X 256X Apert In low light conditions reduce noise by lowing the sharpness value Color In low light conditions reduce noise by lowing the color value 4 WDR Wide Dynamic Range WDR Lite WDR function can not be used with the BLC and is recommended Full Auto Modes Visibility Increases sharpness of the high brightness region Comb Bal Combination Balance Adjust the balance of High amp low luminance area Brightness Adjust brightness level of WDR 5 BLC Back Light Compensation BLC function can not be used with WDR function EHLC Excessive High Light Compensation Fill to high brightness area with gray color Clipping of the area is more bright area than the threshold value Clip Th Clipping Threshold Adjust clipping level Clip Mask Clip Mask Brightness Selecting gray color of clipping area Auto Weighting on the dark area of AE among the splitting 9 area Spot Weighting on the specified ar
6. mode Not support in single camset mode 6 EXT I O D N OUT Day amp Night Output Select output method No Func D N Out AUXO AUXO User Defined output 0 Set AUXO Output voltage through to D N OUT port On 5V Off 0V ALARM OUT Select output method No Func Alarm Out AUX1 AUX1 User Defined output 1 Set AUX1 Output voltage through to D N OUT port On 5V Off 0V D N IN Select input method No Func Alt Camset Alt Camset When inputted signal change camera configuration Select camset number 7 Counter Configurations for output of counting machine 401 av 2 Represent counting value adjust offset value Alarm On Zero When counter value reached zero will be alarmed Preset Cnt1 Cnt2 When counter reached zero counter value will be reset this value Reset Initialize counter Default Zero or Alarm on zero enabled Offset Value TextOut to Comm Event string sends through RS 485 lines Event Out must be activated 16 CONTROL AND CONNECTIONS OF TERMINALS 1 2 3 4 5 6 7 8 DAN DAN com ALARM RS 485 RS 485 IN OUT OUT RX TX 1 2 3 4 5 N C terminals 1 amp 2 DAY amp NIGHT I O To select Day Night mode using external equipment by connecting control lines to the appropriate terminals e DAY amp NIGHT OUTPUT terminals 4 amp 5 Is the camera function that can turn on an external IR LED Lamp by detecting the sensitivity o
7. Abandon Absent Represent abandon absent area with wine colored rectangle Windy Area Represent moving object with violet rectangle 4 dTracking Setup Configurations for digital Pan Tilt Zoom Prority Tracking priority Zone gt Loitering gt Abandon Absent gt Obj Maximum 4 objects can be represented Same priority Continuing detect And Obj gt Size All Object Tracking all detected object Loitering Tracking detected loitering object Abandon Absent Tracking detected absent abandon area Zone When zone event rising tracking the area lt Picture DNR Picture Digital Noise Reduction gt Menu for adjustment of video quality and DNR 1 2D NR Adjust 2D NR strength 2 3D NR Adjust 3D NR strength Remove noise by summing several frames 3 DNR Demo Represent DNR effect Left side is none DNR screen Right side is DNR screen 4 Color Enh Color Enhance Adjust of color strength lt Effect gt 1 Freeze When ENTER key pressed still image will be output on the screen 2 d Effect Off Rotation Mirror V Flip 3 Nega Negative Picture Inverse color effect 4 DIS Digital Image Stabilization Compensation to image vibration 13 Because of this function used d ptz screen magnification will be changed 5 dPTZ Preset Configuration for dPTZ preset It will be applied when menu exit Zoom Adjust magnification Pan amp Tilt Adjust Pen Tilt position Up Down Adjust tilt pos
8. C 10 3 5 W 300mA 2 Pin Terminal Block 1 3 Sony EXview 960H CCD II 1020 x 596 976 x 582 1020 x 508 976 x 494 2 1 Interlace Internal Line Lock Pahse Control 15 734 KHz x 59 95 Hz 15 625 KHz x 50 Hz 700 TVL 0 1 lux color 0 01 lux B W 0 0001 lux Sens Up B W F1 2 50IRE gt 50dB 1 0Vp p 750 WDR Lite ATW Wide ATW Indoor ATW Outdoor Fix Indoor Fix Outdoor Fix FL CRS ATW Range Adjust Full Auto Manual Shutter Flickerless Low Light AGC Sens Up UDF Ultra Deep Field 1 60 1 10 000 Auto 100 000 2D 4 3D Gain Adjust DNR Demo Auto Day Night Ext x256 EHLC AUTO SPOT PVA Motion Loitering Abandon Scene Change Unfocus Windy Area Simple Motion Loitering Abandon Scene Change OFF ON Max 10 4 point polygonal Color Transparancy Mosaic x4 D PTZ Support V FLIP MIRROR ROTATION NEGA amp POSI FREEZE SHARPNESS STILL SHOT Camera Name ON OFF Adjustable Location Camera ID ON OFF Adjustable Location English German French Portuguese Spanish Italian 001 255 Tact Switch RS485 Auto FASTRAX PELCO D PELCO P 1 50 1 10 000 Auto 100 000 10 C 50 C 80 max NOT condensing MECHANICAL 66 W x 56 H x Dimension Weight 66 W x 56 x120 D mm 260g 120 D mm 450g Lens Mount C CS Approvals FCC Class A UL Listed CE Class A Listed 19 SPECIFICATIONS ART HCAM434B HCAM534B ELECTRICAL
9. F TERMINALS 16 LENS sor lr el oi illeso cu le illusi 17 SPECIFICATIONS ___pm ui 1 18 INTRODUCTION The camera provided high quality image using SONY 1 3 CCD and digital signal processing LSls Features 1 3 Sony CCD Super high resolution 7OOTVL Wide Dynamic Range x512 Optional Day amp Night Auto Manual External Filter delay Change level adjust 0 1 lux color 0 01 lux BW 0 0001 lux Sens Up B W F1 2 50IRE Auto Electronic Shutter 1 50 1 100 000 and manual electronic shutter modes 1 50 1 10 000 Sens Up x256 2D NR 3D NR UDF Function Ultra Deep Field Multi Camera Configuration Set 4 Sets Night Profile Ext DN Profile PVA PVA Personal Video Analytics Very High Configurable W Various Detection Methods Motion Loitering Object Abandon Scene Change Unfocus Windy Area Various Zone Event Detection Methods and Event Area Combinations 8 Objects Trace 4 Objects Display Concurrent Processing with All Detections and All Objects Two Counting Block Event String Sending Editable String Digital Tracking Using D PTZ Various Detection Area MAX 10 area Line Rectangle 4 Point polygonal Back Light Compensation EHLC Auto Spot i Freeze Function Reduce recording space Privacy Mask or Mosaic MAX 10 area 4 point polygonal transparency Digital Image Stabilization Digital PTZ Digital Effect H V
10. Input Voltage Power Consumption Connett alimentazione VIDEO Image Device Total Pixels H x V Effective Pixels H x V Scanning System Sync System Scanning Freq H x V Horizontal Resolution Min illumination S N ratio Y signal Video Output OPERATIONAL WDR White Balance Exposure Electronic Shutter Speed Dynamic Noise Reduction Day amp Night Sens up Backlight Compensation Motion Detection amp Video Analytics Digital Image Stabilizer Privacy Masking Digital Zoom Digital Image Effect Display Language Camera ID Camera control Protocol ENVIRONMENTAL Operating Temperature Operating Humidity MECHANICAL Dimension Weight Lens Mount Approvals DUAL 12 VDC 24 VAC 10 pria 3 5 W 300mA 4 0 W 40mA 2 Pin terminal blocks Power cord 1 3 Sony Super HAD Il PS 960H CCD 1020 x 508 1020 x 596 976 x 494 976 x 582 2 1 Interlace Internal Line Lock Pahse Control 15 734 KHz x 59 95 Hz 15 625 KHz x 50 Hz 700 TVL color 0 1 lux Color 0 01 lux B W 0 0001 lux Sens Up B W F1 2 50IRE gt 50 dB 1 0 Vp p 759 x512 Level Adjust WDR Full ATW Wide ATW Indoor ATW Outdoor Fix Indoor Fix Outdoor Fix FL CRS ATW Range Adjust Full Auto Manual Shutter Flickerless Low Light AGC Sens Up UDF Ultra Deep Field 1 60 1 10 000 Auto 100 000 2D 4 3D Gain Adjust DNR Demo Auto Day Night Ext x256 EHLC AUTO SPOT PVA Motion Loitering Abandon Sce
11. KE C cry surveillance Comelit 1 3 CCD SONY SUPER HIGH RESOLUTION COLOR DAY amp NIGHT ANALITICS CAMERA ART HCAM433B HCAM533B HCAM434B HCAM534B Please read this manual thoroughly before use and keep for future reference C Passion and Innovation Via Don Arrigoni 5 24020 Rovetta S Lorenzo Bergamo http www comelitgroup com e mail export department comelit it IMPORTANT SAFETY INSTRUCTIONS nIoosomc 15 16 Apparatus shall not be exposed to dripping or splashing and no object Use only with the cart stand tripod bracket o Unplug this apparatus during lightning storms Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the m anufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plu g A polarized plug has two blades with one wider than the other A gro unding type plug has two blades and a third grounding prong The wid e blade or the third prong is provided for your safety If the provided pl ug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the pow
12. STRAX PELCO D PELCO P Event Out Off Text Out FxLink Event Strings Select amp edit sending strings for PVA PVA Events Text Out Send event string through RS 485 line This function can work with our DVR s Text in feature FxLink Send event to PC application WPC White Pixel Compensation Compensation for defected pixel on CCD While operating on WPC Iris will be closed automatically if you using DC IRIS Lens For manual lens you have to block the lens hole Static Auto Automatic detecting for defected pixel amp compensation Proceeding Doing detection for white pixel 14 If brightness is too high stop the process and print message Bright Too High This function can compensate max 63 points If detected points are more than 63 points repeats this detection by changes conditions If more than 63 point while changing conditions stop the process and print Too Many WH Pixels User can stop the proceeding while on operating Done Complete white pixel detection View Detected WP Print detected pixel on screen Reiry Restart WPC process Accept Store WPC result and return to previous menu Dynamic Automated white pixel compensation for not compensated pixel by static method No limits of compensation pixel number Select level Low Mid High Higher value setting is compensating more pixels If the scene contains high frequency components can cause a lo
13. ction will be enabled Press Enter Key to select output of each detection zone Alarm Trigger alarm to output port Communication Event string sends on RS 485 Screen Display on screen 5 Back return to previous menu Detections X Motion General motion detection d Loitering Within a set period of time detect loitering objects of entire screen Please don t use as a signal for video recording start The result of loitering detection can be inaccuracy lil Abandon Absent Detect the difference to stored background Please don t use as a signal for video recording start The result of abandon absent detection can be inaccuracy amp Scene Change Detect a change in the screen It is good for detecting scene change including vertical lines or high contrast objects of the background Please don t use as a signal for video recording start The result of scene change detection can be inaccuracy Windy Area Detection Detect continuous movement caused by wind or etc If same movement occurs in same area alarm is ignored in this area If no motion is detected for a period of time windy area turns off Please don t use as a signal for video recording start In Simple mode is not supported The result of windy area detection can be inaccuracy 1 Zone Base Functions Max 10 Zone can be configured 10 Because they share area ID with Privacy mask
14. ea of AE 6 Brightness Adjust AE reference level lt Mask gt Privacy Zone can be configured with up to 10 Because they share area ID with PVA Zone It can not be used same ID 1 Zone Select mask number If you see PVA in the Func menu PVA Function is currently being used in the area 2 Func Select mask on off 3 Color Select mask color 15 colors available 4 Transparency Change the mask transparency 5 Mosaic Making mosaic current area 6 Frame Border display current area 7 Shape Select the shape of mask 4 point polygon or rectangle Rect Rectangle Adjust rectangle with 4 arrow keys Press ENTER key is to finish edit area Poly 4 Point Polygon Each point can move It you select one of a b c d the active point is displayed Move the point with 4 arrow keys Press ENTER key is to finish edit area For more than 180 of interior angle is not permitted Posi Adjust area position with 4 arrow keys lt PVA PVA Personal Video Analytics gt PVA is our unique name of our video analytics If you exit menu doing Initialize started while 4 5 seconds the background During initialization the background it is good to be none of moving objects When Day Night mode is changed or Cam Set is changed the background of the re initialization performed Global Functions This functions being performed in the entire area Output Select It must be specify the outputs each fun
15. er cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from th e apparatus Only use attachments accessories specified by the manufacturer r table specified by the manufacturer or sold wi th the apparatus When a cart is used use caut ion when moving the cart apparatus combinatio n to avoid injury from tip over or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power su pply cord or plug is damaged liquid has been moisture does not oper ate normally or has been dropped CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE B Y QUALIFIED SERVICE PERSONNEL ONLY TO REDUCE THE RIS K OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OT HER THAN THAT CONTAINED IN THE OPERATING INSTRUCTION S UNLESS YOU QRE QUALIFIED TO DO SO Use Certified Listed Class 2 power source only filled with liquids such as vases shall be placed on the apparatus CE COMPLIANCE STATEMENT WARNING This is a Class A product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC COMPIANCE STATEMENT FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to
16. it can not be used same ID Zone Select zone ID Func Function Zone Function On Off Blinking enabled area Shape Select area shape Color Select area s frame color Rect Rectangle Adjust rectangle with 4 arrow keys Press ENTER key is to finish edit area Poly Polygon It you select one of a b c d the active point is displayed Move the point with 4 arrow keys Press ENTER key is to finish edit point For more than 180 of interior angle is not permitted Line Select Start End Point It you select one of start end the active point is displayed Move the point with 4 arrow keys Press ENTER key is to finish edit point Posi Adjust area position with 4 arrow keys MD Event The result of MD event detection can be inaccuracy Zone Configurations for various zone events Following area possible events are different Output Select Press Enter key on icon to watching event popup box appear 4 Alarm Trigger alarm to output port Communication Event string sends on RS 485 Screen Display on screen 5 Back return to previous menu ab 1 2 Send event to counting machine OFF No Effect INC Increment counting value DEC Decrement counting value The result of counting value can be inaccuracy Screen Printed event at bottom side by side scrolling Icon Subject Range X Motion Rect Poly Line Motion occurred Moti
17. ition Left Right Adjust pan position 6 i Freeze Select term of refresh rate for output video This function is useful to reduce the recording data storage When motion is detected while i Freeze image is refresh to live mode So not only reducing the recording data but also not to miss object movement No Motion s Adjust Interval while no motion Motion 0 1s Adjust Interval while motion exists lt System Setup gt 1 General Cam Info Display camera basic information Cam ID Baud rate Protocol Lens Type CCD Type Video System Firmware Version System Lock System locking by 4 characters PID Lock Unlock Change PID Change PID used in the system lock Enter PID Input previous password Default PID is 0000 Enter New PID Input new password Retype New PID Confirm of new password Title Change camera title Max 8 characters Display Configurations for display camera ID amp title Cam ID Select camera ID display on off Title Select title display on off Display Pos Change position the string location Language Change menu amp OSD language 2 Setup Tools System Config Multi Camset Select On User can use 4 configuration sets off Video Analytics Select PVA mode Simple PVA PVA Communication Configuration for RS 485 Cam ID Select the camera ID 001 255 Baud Rate Select serial communication speed 2400 4800 9600 19200 Protocol RS 485 protocol Auto FA
18. n the AGC level when the D amp N mode is set AUTO on the OSD menu of the camera 4 DAY amp NIGHT OUTPUT e 5V 10mA IR LED ON NIGHT COM e OV IR LED OFF DAY e DAY amp NIGHT EXTERNAL INPUT terminals 3 amp 5 Is the camera function that can be switched to DAY Mode or NIGHT mode by receiving the D amp N on off signal from external light sensor or IR LED LAMP This needs the D amp N Mode to be set to External on the OSD menu of the camera to work COM m Open contact DAY DAY amp NIGHT INPUT Close contact NIGHT Me OUT terminals 6 amp 5 TTL bra Motion detection signals are output through this port Active state is configurable POWER INPUT TERMINAL e Thisterminal accepts a DC12V or AC24V power DIE source from a DC12V or AC24V ac 10 SIC 60 50Hz 1Hz CLASS 2 ifi DE Use Certified Listed Class 2 power supply only AC 24V e It is recommended to use the DC power supply that can support inrush current over 0 55A AC Power Cord This power cord accepts a 100 240V 50Hz 1Hz AC 100 240V CAMERA CONTROL e RS 485 terminal 7 e RS 485 terminal 8 17 LENS The lens is not supplied with this camera Purchase a lens suitable for your requirements These cameras accept both C and CS mount type lens lt Notes gt For using main functions it is recommended to use Auto Iris Lens with DC type If the lens is marked with fingerprints other marks the image
19. ne Change Unfocus Windy Area Simple Motion Loitering Abandon Scene Change OFF ON Max 10 4 point polygonal Color Transparancy Mosaic 4 D PTZ Support V FLIP MIRROR ROTATION NEGA amp POSI FREEZE SHARPNESS Still Shot Camera name ON OFF Adjustable Location Camera ID ON OFF Adjustable Location English German French Portuguese Spanish Italian 001 255 Tact Switch RS485 Auto FASTRAX PELCO D PELCO P 1 50 1 10 000 Auto 100 000 10T 50 C 80 max NOT condensing 78 8 W x 64 H x118 4 D mm 260g Di ne ai An C CS FCC Class A UL Listed CE Class A Listed Comellit Passion and Innovation Via Don Arrigoni 5 24020 Rovetta S Lorenzo Bergamo http www comelitgroup com e mail export department comelit it 21
20. on Inside Rect Poly Motion occurred in the area Move Into Rect Poly Object on outside moves into the area Appear Inside Rect Poly Object which appeared inside In Simple mode is not supported Move Out Rect Poly Object moves out Please don t use as a signal for video recording start E Appeared amp Rect Poly Object which appeared inside and moves Move Out out Please don t use as a signal for video recording start In Simple mode is not supported Disappear Inside Rect Poly Object disappeared inside Please don t use as a signal for video recording start In Simple mode is not supported 11 Es Moved In amp Disappear Rect Poly Objects from outside move into inside and disappears inside Please don t use as a signal for video recording start In Simple mode is not supported dl Loitering Rect Poly Detect moving object within the zone during a time Please don t use as a signal for video recording start In Simple mode is not supported Abandon Absent Rect Poly Detect different region to stored background Please don t use as a signal for video recording start In Simple mode is not supported 4 In amp Out 5 Direction Rect Detect object moving From top to enter of area detecting direction of moving out Please don t use as a signal for video recording start In Simple mode is not supported
21. provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This Class A digital apparatus complies with Canadian ICES 003 Cet appareil num rique de la classe A est conforme la norme NMB 003 du Canada CONTENTS OF PACKAGE Installation of the camera must be performed by qualified service personnel in accordance with all local and national electrical and mechanical codes Carefully remove the color camera and its accessories from the carton and verify that they were not damaged in shipment The content of the package includes 1 Color CCD camera 2 Mini DIN connector for video or dc type auto iris lens 3 CS adapter ring for C mounting C lenses 4 This manual TABLE OF CONTENTS INTRODUCTION ii ia 5 CAMERA OVERVIEW pce do iu cau eee 6 CAMERA ADJUSTMENT ette D i iie 7 CONTROL AND CONNECTIONS O
22. quality might be poor It is recommended to use a high quality lens to improve the image quality under low illumination lt INSTALLING AUTO IRIS LENS gt 1 Remove the cover from the iris lens plug supplied and solder the lens cable to the plug as shown below e Video type e DC type Pin 1 Red Power source Pin 1 Damping Pin 2 N C Pin 2 Damping Pin 3 White Video signal Pin 3 Drive Pin 4 Black GND Pin 4 Drive Rib Connector TZ Automatic Pin 3 Cover NG Iris Lens Pin 1 Heat Pin4 Shrinkable Tubes Pin 2 Iris Control Cable Connector 2 Remove the protective cap and attach the lens to the camera by turning clockwise 18 SPECIFICATIONS ART HCAM433B HCAM533B ELECTRICAL Input Voltage Power Consumption Power Connector VIDEO Image Device Total Pixels H x V Effective Pixels H x V Scanning System Sync System Scanning Freq H x V Horizontal Resolution Min illumination S N Y signal Video Output OPERATIONAL Image Enhancement White Balance Exposure Electronic Shutter Speed Dynamic Noise Reduction Day amp Night Sens up Backlight Compensation Motion Detection amp Video Analytics Digital Image Stabilizer Privacy Masking Digital Zoom Digital Image Effect Display Language Camera ID Camera Control Protocol ENVIRONMENTAL Operating Temperature Operating Humidity 100 240 VAC 50Hz 1Hz 4 0 W 40mA DUAL 12 VDC 24 VA
23. reverse 180 degree rotate inverse freeze White Pixel Removal Focus Aid Function Color Rolling Suppression System Lock 4 character password C CS back focus cam for easy adjustment Auto and Manual white balance modes Support Line Lock external synchronization RS 485 Remote camera control Multi Language Compatible with Video DC type lenses with OSD select Quick connect for Video or DC lens with 4 pin connector User Certified Listed Class 2 power source only Operates in 12 VDC 24 VAC 100 240 VAC CAMERA OVERVIEW ART HCAM433B HCAM533B 1 4 20UNC 120 0mm 66 0mm FRONT VIEW LEFT Button UP Button ENTER Button RIGHT Button DOWN Button Day Night External I O Motion Alarm OUT RS 485 Power Indicator Video Output Connector BNC N C AC DC compatible input terminal AC power cord CAMERA OVERVIEW ART HCAM434B HCAM534B 1 4 20UNC CIT SIDE VIEW FRONT lt IEW LEFT button UP button ENTER button RIGHT button DOWN button Day Night External I O Motion Alarm OUT RS 485 power Indicator video output connector BNC NC AC DC compatible input terminal AC power cord lt Remarks gt 1 Menu Represent present menu subject on top of screen In case of used Multi Camset Represent CAM ID and camset name included Common Headers
24. ss Static Manual Manual white pixel compensation by appointment method Move Finder window using 4 arrow keys Marker Expand finder window using digital zoom Move compensation pixel using 4 arrow keys Register Adding compensation pixel Registered points are more than 63 points print Memory Full and stops action Marker Use this if user sees other points Finder Use this when you need to move finder screen UnDo Cancel the registered point Done Return to previous menu Unregist Deleting registered pixel No more exist register pixel Print Memory empty and stops action Marker Select for if you continue unregister action UnDo Cancel the unregistered point Done Return to previous menu Default Recover to factory adjustment state Focus Aid For prevent the spread of light AE mode changed to Shutter Fix Mode Min SHT sec Adjust minimum shutter speed Zoom Zoom to focus window Adj Adjust Start Start measurement of maximum focus value Stop Stop the measurement And initialize maximum focus value FAD Max Hold maximum focus value FAD Val Print present focus value Usage Step1 Point target to focus window Good target higher contrast more complex patterns Step2 Minimize the spread of light with adjust shutter speed Step3 Turn the lens focus ring to end start Adj Step4 Turn the lens focus ring slow by opposite side record max focus value
25. unctions Md Sens MD Sensitivity Adjust motion sensitivity HW sensitivity Loiter Time min Time for judge to loitering object Abandon Absent Setup Sens Sensitivity Adjust sensitivity of abandon absent detection Det Time min Time for judge to absent abandon area Rst Time sed Time for maintain event After this background will be update Scn Chg Setup Scene Change Setup Sens Sensitivity Adjust sensitivity of scene change detection Chg Ratio Adjust judgment ratio that changed from the stored background Det Time sec Time for judge scene changing Rst Time sec Time for maintain event After this background will be update Unfocus Detection on off of unfocused state defocused state Windy Setup Windy Area Detection Setup Not applied in Simple PVA mode Sens Sensitivity Adjust sensitivity of windy object detection Det Time sec Time for judge to windy object Rst Time sec Time for release to windy object that staying with no motion 3 Display Setup Configuration for information on screen Priority Abandon Absent gt Loiter gt Moving Object gt Windy Same priority large object size order Alarm Represent alarm icon on right up side by of screen Counter Represent counting on left bottom Det Only When an event occurs Zone Area Represent active zone Moving Object Represent moving object with white rectangle Loitering Represent loitering object with green rectangle
Download Pdf Manuals
Related Search