Home

test specifications for dvb-t receivers used in republic of slovenia

1. The receiver shall provide at least one stereo audio decoder that is able to meet minimum decoding requirements based on MPEG 1 Layer II Musicam ISO IEC 11172 3 and decoder for AC3 Audio decoder shall support also AAC decoding according to ISO IEC 14496 3 subpart 4 mandatory for devices on Slovenian market from 01 01 2010 Test Purpose of test procedure To verify decoding of audio content coded with different procedures Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport streams D I and M Test procedure 1 Prepare test environment and setup of instruments 2 Tune the receiver to the service including only audio content coded with MPEG 1 Layer II In user interface set the stereo audio output to MPEG 1 Layer II Verify the presence of sound on stereo output and fill in the results In user interface select AC 3 audio for digital output Verify the functionality of AC3 coder on digital optical or coaxial output and fill in the results 7 Tune the receiver to service including multichannel AC3 coded audio 8 In user interface select AC 3 audio for digital output 9 Verify the functionality of AC3 coder on digital optical or coaxial output and fill in the results 10 Verify the presence of sound on stereo output and fill in the results 11 Tune the receiver to service including AAC coded audio 12 In user interface set AAC as source
2. e Services in the stream Service_id Service_name Type Comments 1 S1 TV TV H 264 10 AVC MPEG1 Layer II TTX VPS 2 S2 TV TV H 264 10 AVC AC3 2 0 audio 5 S5 RA SLO1 RA MPEG1 Layer II 6 S6 RA SLO2 RA MPEG1 Layer II Stream M e PSI SI PAT NIT PMT SDT EIT TDT and TOT e NIT Terrestrial 64 QAM 3 4 Tu 16 CH 45 666 MHz e Services in the stream Service_id Service_name_ Type Comments 1 S1 1080i TV H 264 10 AVC 1920x1080i E AC3 2 0 2 S2 720p Tv DAS AVC 1280x720p MPEG1 Layer II AC3 Stream N1 e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 H264 HD TV H 264 10 AVC 1920x1080i E AC3 2 0 384 kbit s 2 S2 H264 HD TV H 264 10 AVC 1920x1080i E AC3 3 2 448 kbit s Stream N2 e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 H264 HD TV H 264 10 AVC 1920x1080i E AC3 2 0 256 kbit s 2 S2 H264 HD TV H 264 10 AVC 1920x1080i E AC3 3 2 384 kbit s Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 11 Stream N3 e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3
3. D Consumer Electronics Association CEA A DTV Profile for Uncompressed High Speed Digital Interfaces July 18 2006 31 EICTA HD extension to High Definition extensions to the IEC 62216 1 Digital IEC 62216 1 Terrestrial Television Receivers for the DVB T System 32 IEC 60603 14 Connectors for frequencies below 3 MHz for use with printed boards Part 14 Detail specification for circular connectors for low frequency audio and video applications such as audio video and audio visual equipment 33 ETSI TS 102 366 Digital Audio Compression AC 3 Enhanced AC 3 Standard 34 ISO IEC 14496 3 ISO IEC Information technology Coding of audio visual objects Part 3 Audio 2005 35 REQUIREMENT SPECIFICATIONS FOR DVB T RECEIVERS USED IN REPUBLIC OF SLOVENIA v1 0 28 10 2008 36 EICTA HD Ready EICTA European Information amp Communications Technology Industry Association HD ready Minimum Requirements www eicta org Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 6 4 Data about receiver The tests shall be performed with the same receiver model HW SW in all test cases Following table should contain data about receiver under test Table 1 Receiver data Manufacturer Model S N SW version HW version Type L SDTV LC HDTV Other information Test specifications for DVB T recei
4. Display type display display Voltage on SCART PIN 8 WSS Decoder format conversion Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 33 Test Task 3 2 Interface for Conditional Access Requirement The receiver should support at least one DVB Common Interface for CA module for conditional access CI slot should comply with EN50221 Test Purpose of test procedure To verify if an interface for Conditional Access is present and if the CI slot complies with requirement Equipment Receiver under test Test procedure 1 Under consideration of receiver documentation and visual inspection check if the CI slot complies with requirement Expected result In case the receiver is equipped with CI slot the CI slot complies with requirement Test results Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 34 Tes
5. Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES L_ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 53 Test Task 7 5 HDTV AUDIO E AC3 metadata support Requirement The receiver shall support the use of Dolby metadata embedded in the audio stream when e decoding AC3 or E AC3 bitstreams e transcoding E AC3 bitstreams to AC3 or e creating a PCM stereo downmix from a decoded E AC3 or AC3 bitstream Test Purpose of test procedure To verify that the receiver supports Dolby metadata Equipment Home pee Meee eens DVB T STR anema system The TS shall contain a service E AC3 which has the following metadata included in audio component e Dolby Dynamic Range Control e Dolby Dialogue Normalization according to ISO IEC 14496 3 2005 Audio 3rd edition e Down Mix parameters Transport stream used Use transport stream N1 Test procedure 1 Setup the system 2 Connect audio decoder to HDMI output 3 Verify that the receiver supports metadata correctly for decoding of the E AC3 stereo 4 Verify that the receiver supports metadata correctly for transcoding E AC3 multichannel to AC3 5 Verify that the receiver supports metadata correctly for creating PCM stereo downmix Expected result The receiver supports E AC3
6. QPSK 16 QAM 64 QAM Code rate R 1 2 2 3 3 4 5 6 7 8 Guard interval A Tu 1 4 1 8 1 16 1 32 Hierarchical mode not required Test Purpose of test procedure To verify the operation with different DVB T transmitting parameters Equipment D MPEG 4 DVB T UP l ee Sr Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Use channel 45 and set the receiver input level to 60 dBm 3 Start with 8K QPSK R 1 2 A Tu 1 32 1 Check the conformity using ISMMK 4 Fill the table with test results YES or NO 5 The test shall be performed for all combinations of parameters in table TEST RESULTS Expected result The receiver is capable to operate with all combinations of transmitting parameters Test results 8K R A Tu 1 32 A Tu 1 16 A Tu 1 8 A Tu 1 4 QPSK 1 2 QPSK 3 4 16 QAM 5 6 64 QAM 2 3 64 QAM 7 8 Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 18 Test Task 1 6 Maximum Receiver Signal Input Level Requirement The receiver shall support at least 23 dBm 86 dBuV at 75 Q
7. Transcoding to AC3 audio streams shall be at a fixed bitrate of at least 640 kbit s Test Purpose of test procedure To verify that the receiver supports E AC3 Equipment Home a A a ik r Decor DVB SNB cinema source odulato system The TS shall contain services which has e E AC3 mono stereo audio component with relevant signalling at the 192 256 and 384 kbit s bitrates at 48kHz sampling rates e E AC3 multichannel audio component with relevant signalling at 384 512 and 640 kbit s bitrates at 48kHz sampling rates Transport stream used Use transport stream N1 N2 and N3 Test procedure 1 Setup the system 2 Verify the S PDIF output has correct bitstream format and audio is hearable correctly 3 Select stereo mode for the audio in the menu system 4 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs for the selected bitrates and sampling rates 5 Select multichannel mode for the audio in the menu system 6 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs for the selected bitrates and sampling rates Expected result Receiver supports the required audio formats Test results E AC3 stereo Sampling bitrates 192 kbit s 256 kbit s 384 kbit s 48 kHz E AC3 multichannel 5 1 Sampling bitrates 192 kbit s 384 kbit s 448 kbit s 48 kHz Conformity L Compliant L Non compliant _
8. Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 H264 HD TV H 264 10 AVC 1920x1080i E AC3 2 0 192 kbit s 2 S2 H264 HD TV H 264 10 AVC 1920x1080i E AC3 3 2 192 kbit s Stream O e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments H 264 10 AVC 1920x1080i HE AAC3 2 0 48 kbit s 1 S1 H264 HD TV HE AAC3 2 0 80 kbit s HE AAC3 2 0 96 kbit s According to ANNEX I of ETSI EN 300 468 v1 9 1 10 the service_type field is present within both the service_descriptor and service_list_descriptor and is used to specify the type of a transmitted service The intention of this field provided at a very high level within DVB Service Information SI is first to allow the service provider to describe the nature of the service and second to allow the receiver to select as soon as possible after the discovery of a service through re scan or some other mechanism about how and indeed whether to present the service to the viewer for selection There are two possibilities standard and advanced codec The advanced codec service_types have been allocated so as to be able to indicate that a service has been encoded using something other than MPEG 2 As Slovenia decided to use advanced codec inside the streams advanced descriptors are
9. _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 43 Test Task 6 2 MPEG VIDEO Decoder decoding of MPEG 2 SD resolutions Requirement The decoder of receiver shall fully comply with standard ISO IEC 13818 2 for decoding of MPEG 2 coded signal The decoder shall also comply with ETSI TS 101 154 and shall support VBR and CBR Test procedure Purpose of test To verify if receiver is capable of decoding MPEG 2 video services in different resolutions Equipment l MPEG 4 DVB T UP DVB T STB source Modulator converter Le ee Transport stream used Use transport stream H Test procedure 1 Prepare test environment and setup 2 In receiver select MPEG 2 coded TV program 3 Set the receiver input level to 50dBm 4 Use ISMMK and check all resolutions Fill in the results Expected result Receiver is capable of decoding all listed picture resolutions Test results Resolution 720x576 544x576 480x576 352x576 Conformity Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software upd
10. 1080i 25 Test procedure 1 Play transport stream 2 Power On the receiver 3 Tune to the service in test stream 4 Verify that video is displayed in original format if possible for the display Expected result The receiver shall negotiate the display parameters according the input signal Test results Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 38 Test Task 3 7 HDMI interface Manual setting of resolution Requirement The HDTV level STB It shall have the possibility to manually set the default output format to a fixed format The fixed format shall include at least one of the following formats e 1920x1080iI 25Hz 1920x1080p 25tz e 1920x1080p 50Hz e 1280x720p 50Hz Test procedure Purpose of test To verify that the receiver is able to use the EDID information This test is relevant for STB only For other receivers having HDMI output interface this test is optional Equipment MPEG 4 DVB T UP Transport stream used Use transport stream B and M Test procedure 1 Manually set the display format to 1280x720p 50Hz Verify that format is set Repeat the test with other resolutions 1920x108
11. 7 Check the conformity using ISMMK 8 Fill the table with test results YES or NO Expected result The results shall be conforming for all values of frequency offset for on channels 21 31 41 51 61 in 69 Test results Channel Frequency MHz Frequency offset kHz Conformity 474 10 21 474 0 474 10 31 554 0 41 634 0 51 714 0 61 794 0 858 10 69 858 0 858 10 Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 15 Test Task 1 3 Performance in Single Frequency Networks echo inside the guard interval Requirement The receiver shall be capable of receiving the signal in simulated SFN networks Test Purpose of test procedure To verify if receiver is capable of receiving the signal in simulated SFN networks according to conditions in this task Equipment Sh DAN l l l l z UP etx SS Modulator CHx ATT Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Use mode 8k 64 QAM R 2 3 A Tu 1 4 GI
12. T receivers used in Republic of Slovenia v1_1 doc Page 27 Test Task 2 2 Manual program search Requirement In addition to the automatic search it shall be possible to perform a manual search where the channel number only is entered by the end user The receiver shall tune to this channel search all available COFDM modes add all new services and replace existing services in the service list without considering any quality criteria Test Purpose of test procedure To verify the functionality of the manual channel search Equipment MPEG 4 source 1 UP converter CH x DVB T Fading Noise Modulator simulator generator Monitor UP converter MPEG 4 DVB T source 2 Modulator DVB T STB CH i ATT Channel CH x Channel CH y TS B TSC NAME ServID NAME ServID S1 1 S1 1 S2 2 S5 4 S3 3 S6 5 S4 4 S7 6 On terrestrial network there is possibility to receive several transmitters simultaneously These transmitters can have same content but transmitted on different channels The content can be partially local and therefore different and it is important to have the possibility of manual channel selection without considering any quality criteria Transport stream used Use transport streams B and C Test procedure 1 Prepare test environment and setup of instruments 2 Check if program list is empty delete
13. audio 6 S6 SUBT TV MPEG2 TTX DVB Subtitling Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 8 Stream D e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name_ Type Comments 1 S1 TV TV TV service H 264 10 AVC 720x576 resolution 2 S2 TV TV TV service H 264 10 AVC 720x576 resolution 3 S3 TV TV TV service H 264 10 AVC 720x576 resolution AAC 4 S4 RA AAC RA RA service AAC 5 S5 RA SLO1 RA RA service MPEG1 Layer II 6 S6 RA SLO2 RA RA service MPEG1 Layer II 7 S7 RA SLO3 RA RA service MPEG1 Layer II 8 S8 RA SI RA RA service MPEG1 Layer II Stream E e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 3 4 Tu 8 CH 45 666 MHz e Content statistical multiplex with VBR e Services in the stream Service_id Service_name Type Comments 1 S1 H264 SD TV H 264 10 AVC 720x576 resolution MPEG1 Layer II 2 S2 H264 SD TV H 264 10 AVC 720x576 resolution No audio 3 S3 H264 SD TV H 264 10 AVC 720x576 resolution No audio 4 S4 1080i HD TV H 264 10 AVC 1920x1080i resolution AC3 2 0 5 S5 1080i HD TV H 264 10 AVC 1920x1080i resolution AC3 3 2 6 S6 MPEG2 TV MPEG 2 720x576 resolution MPEG1 Layer II BEEP Stream
14. compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 58 Test Task 8 1 Radio mode basic functionality Requirement The STB shall allow basic DVB T RADIO reception and operation switching between channels without a TV screen This can be done with a Radio TV button on the front plate or on the remote control Test Purpose of test procedure To verify the radio functionality of STB Equipment Receiver under test Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream including video MPEG 4 and MPEG 2 and also radio services The reception of radio services shall be checked and possibilities of radio service selection over user interface or display if any Transport stream used Use transport stream D Expected result STB is capable of reception and switching between radio services Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Sl
15. mandatory Chapter 11 1 Processing of PSI SI tables shall shall 10 1 Chapter 11 1 EPG functionality for EIT actual and EIT other shall shall 10 2 Chapter 11 2 Presentation of EPG in Slovene language shall shall 10 3 Chapter 11 2 Default audio language support shall shall 10 4 Chapter 11 3 CVBS teletext shall should 10 5 Task 10 5 or 10 6 Presentation of teletext within user interface Chapter 11 3 for SDTV receivers shall 10 6 Task 10 5 or 10 6 Chapter User interface based teletext for HDTV Level shall 11 3 1 receiver 10 7 Chapter 11 4 DVB subtitling shall shall 10 8 Chapter 11 5 Storing user preferences in persistent memory shall shall 10 9 Chapter 11 5 _ Reset all parameters to factory mode shall shall 10 10 Chapter 12 Remote control shall shall 11 1 Chapter 13 Factory presets shall 12 1 Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 3 2 List of Abbreviations AAC AC3 AV AVC CA CAT CBR CI COFDM CVBS DVB T E AC3 EIT EN EPG ETSI HE AAC HDMI HDTV iDTV ISO ISMMK ITU MFN MHP MPEG NIT PAT PCM PMT PSI QAM QPSK RF RGB SDT SDTV SFN SI STB TDT TOT TS UHF VBI VBR VHF Advanced Audio Coding Digital audio compression standard known as Dolby Digital Audio Visual Advanced Video Coding Conditional Access Conditional Access Table Constant Bitrate Common Interface Coded Orthogonal Frequency Division Multiplexing Composite Video Baseband S
16. nil ili 25 Task 2 1 Automatic program Search wai cient cite eniu eddie eseaddierseeddesenatn tied ideeetitereenttierenees 26 Task 2 2 Manual program search siiin nin nnn nnn nn nn nnn nnn nnn nnn nn nn nnn nnn i nln i i iii 28 Task 2 3 Tuning and scanning Changes in modulation parameters 000000 0 ieee 30 Task 2 4 Tuning and scanning dynamic PMT 0000 000 j tli ll ll ll ll lll ln nn nnn ni i i i iid iiiieeneeee 31 Task 3i2 SCART Intertace a T a e a A A aaan ge hiuaa au ae aAa a a r EAIN aiaa EAEan 32 Task 3 2 Interface for Conditional ACCESS 0 ccce cccsecesceccesescsececctcececeneesatacauececeeanecdenessaesereseeseeeesereneresereees 34 Task 3 3 Digital Audio Output S PDIF 0 jl ill lll nn nn nnn nnn nn nnn nn nnn nll i iii 35 Task 3 4 HDMI interface compliancy for HD Ready ii lll ll ll ll ll lll ll il iil indie 36 Task 3 5 HDMI interface EDID information 00000 000 jj jl ll lll lll lll nn nn nnn nnn ini iii iii 37 Task 3 6 HDMI interface original formalt 00 0 00 jj ill lll lll lll ll nn nnn nnn nnn nn i ln nln ilies 38 Task 3 7 HDMI interface Manual setting of reSOlUtion 0000 00 ji ll ill ll ni ll lll iii iii ieee 39 Task 4 1 Realtime COCK ii ciceiicdieciicectieaactaaietvrtierdiaisiveiiterdidsciebiers seabed anieiiditeniiniandeiicaesineiieesiacts 40 Task 5 1 MPEG Demultiplexer maximum transport stream data rate 000 eee 41 Task 5 2 MPEG Demu
17. of input signal without degradation Test Purpose of test procedure To verify the capability of receiver in case of high input signal level Equipment MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Check the Attenuation of attenuator ATT 3 Use mode 8K 64 QAM R 2 3 A Tu 1 4 4 On UP converter set channel 45 5 Check the Attenuation of ATT and connection cables 6 Turn the receiver ON 7 Check appropriate decoding of picture 8 Calculate receiver input signal as an function of Attenuation of ATT 9 Set the receiver input level to 23 dBm considering Attenuation of ATT 10 Check the functionality of receiver using ISMMK 11 Fill the table with test results YES or NO 12 Repeat the test for other parameters from the table Expected result The reception shall be without failures according to QEF for input signal levels up to 23 dBm Test results Input level Mode dBm Conformity 8K 64 QAM R 2 3 A Tu 1 8 23 8K 64 QAM R 2 3 A Tu 1 4 23 8K 64 QAM R 3 4 A Tu 1 4 23 8K 64 QAM R 3 4 A Tu 1 8 23 Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic
18. quality Channels CH x and CH y shall not be equal Relative signal levels can be observed with spectrum analyzer Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments Use transmitting mode 8k 64 QAM R 2 3 A Tu 1 4 2 Attenuate signal level of CH x for 5dB related to the level of CH y Both levels shall assure error free decoding of picture Check if program lists are empty In case not delete the lists Perform automatic channel search Check if the list of programs includes all programs inside transport stream Check if the lists are partially duplicated Write into the table Channel CH X CH Y in case found programs are not duplicated DTE O Expected result The receiver is capable of finding all services from transport streams and sorting them into program lists Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 26 Test results Requirements Result Conformity After scanning all transmitted services are listed in program list The service lists are not duplicated for both frequencies Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB
19. the audio in the menu system 4 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs 5 Select multichannel mode for the audio in the menu system 6 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs Expected result The receiver will support E AC3 on S PDIF output according to requirements Test results Conformity PCM stereo from the decoded or down mixed bitstream Multichannel E AC3 bitstream transcoded to AC3 or DTS Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 52 Test Task 7 4 HDTV AUDIO E AC3 requirements Requirement The receiver shall e Decode AC3 streams at all bitrates and sampling rates listed in ETSI TS 102 366 not including Annex E e additionally decode E AC3 streams with data rates from 32 kbit s to 3024 kbit s and support all sample rates listed in TS 102 366 Annex E e Be capable of transcoding E AC3 bitstreams to AC3 bitstreams according to ETSI TS 102 366
20. the list if it is not empty 3 Attenuate signal on CH X so the reception is not more possible 4 Perform automated channel search 5 Check that programs S1 S5 S6 and S7 listed in program list are actually from CH Y attenuate signal of CH Y If received channel is correct programs S1 S5 S6 and S7 shall freeze when signal level is too low Move the attenuator to start position 6 Reduce the attenuation of channel CH X to the level that reception is possible Add noise to carrier on channel CH X so requirement ISMMK is fulfilled 7 Perform manual program setup Check that carrier of channel that should be deleted is listed in program list and manual setup is successful 8 Fill the data into the table 9 Check that programs Si S2 S3 and S4 on program list are transmitted in CH X Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 28 using attenuator If received channel is correct programs S1 S2 S3 and S4 shall freeze when signal level is too low Move the attenuator to start position 10 Check if program S1 is listen only once in program list The channel list shall look like this after performing this procedure Position Program Channel 1 Si CH X 2 S2 CH X 3 S3 CH X 4 S4 CH X 5 S6 CH Y 6 S7 CH Y 7 S5 CH Y The services found in last manual channel search are stored in the service list according to their signalization If the se
21. v1_1 doc Page 71 Test Task 10 10 Reset all parameters to factory mode Requirement The receiver shall provide a function to reset all parameters to factory mode thus removing all service lists user preferences etc After reset the receiver shall enter installation state Test procedure Purpose of test To verify the function of reset to factory mode Equipment Receiver under test Test procedure 1 Inside user interface find the function for reset of all parameters and activate the function 2 Check if user settings and program lists are in installation state or deleted Expected result The receiver provides reset function and it is functioning OK Test results Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 72 Test Task 11 1 Remote control Requirement The receiver shall include remote control for managing and using the receiver Test Purpose of test procedure To verify the conformity of remote control with manufacturer specifications Equipment Receiver under test Test procedure 1 Verify the functionality of remote control according to user manu
22. 0i 25Hz 1920x1080p 25Hz and 1920x1080p 50Hz e UN Fill in the test results Expected result It shall be possible to set output format manually Test results Resolution Conformity 1280x720p 50Hz 1920x1080i 25Hz 1920x1080p 25Hz 1920x1080p 50Hz Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment TV Monitor Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 39 Test Task 4 1 Real time clock Requirement The receiver shall have a real time clock and the clock shall be updated by incoming TDT and TOT data Test procedure Purpose of test To verify that the real time clock runs continuously and it is updated from data in transport stream Equipment MPEG 4 DVB T UP SS ee Test procedure 1 Connect and start up the instruments 2 Locate the time and date displayed inside user interface 3 Make sure that the TDT Time and Date Table and TOT Time Offset Table are present in the transport stream 4 After connecting signal to receiver check if time and date display updated according to data in transport stream TOT can be used but this is not mandatory In any case the receiver shall prov
23. 4 v1 8 1 Digital Video Broadcasting DVB Implementation guidelines for the use of MPEG 2 Systems Video and Audio in satellite cable and terrestrial broadcasting applications 4 ISO IEC 14496 10 Information technology Coding of audio visual objects Part 10 Advanced Video Coding 5 ISO IEC 13818 1 Information technology Generic coding of moving pictures and associated audio information Systems 6 ISO 639 2 Code for the representation of names of languages 7 ITU T V 92 Enhancements to Recommendation V 90 8 EN 50049 1 Domestic and similar electronic equipment interconnection requirements Peritelevision connector 9 EN 50157 2 1 Domestic and similar equipment interconnection requirements AV link Part 2 1 Signal quality matching and automatic selection of source devices 10 EN 300 468 v1 9 1 Digital Broadcasting Systems for television sound and data services Specification for service information SI in Digital Video Broadcasting DVB Systems 11 ETSI TR 101 211 v1 7 1 Guidelines on Implementation and Usage of Service Information SI 12 ETSI TS 102 006 v1 3 1 Digital Video Broadcasting DVB Specification for System Software Update in DVB Systems 13 ETS 300 231 Television systems Specification of the domestic video Programme Delivery Control system PDC 14 ETSI ES 202 130 v1 1 1 Human Factors HF User Interfaces Character repertoires ordering rules and assignments to the 12 key telephone key
24. 480x576i TV MPEG2 480x576i MPEG1 Layer II TTX VPS 4 S4 352x576i TV MPEG2 352x576i MPEG1 Layer II TTX VPS Stream I e PSI SI PAT NIT PMT SDT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e EIT contents current following parental rating e End of show start of new show changes in parental rating e EPG language SLV e Services in the stream Service_id Service_name Type Comments 1 SLOL TV H 264 10 AVC 720x576i MPEG1 Layer II TTX VPS gt SLO qy_ H 264 10 AVC 720x576i MPEG1 Layer II TTX VPS 3 SLO3 TV H 264 10 AVC 720x576i MPEG1 Layer II 4 TEST TV e AVC 720x576i MPEG1 Layer II TTX Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 10 Stream K e Stream K is stream B without NIT table and is used for testing of signalization e PSI SI PAT No NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name_ Type Comments 1 S1 TV H 264 10 AVC 720x576 resolution 2 S2 TV H 264 10 AVC 544x576 resolution 3 S3 TV H 264 10 AVC 480x576 resolution 4 S4 TV H 264 10 AVC 352x576 resolution TTX Stream L e PSI SI PAT NIT PMT SDT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Changes in PMT current_version swiching of service components service S2 TV
25. 6 Chapter 2 1 1 Signal level and signal quality indicator shall shall 1 7 Chapter 2 1 1 Performance in SFN networks on Gaussian shall shall 1 8 channel with presence of noise in input signal Immunity to analogue signals on Chapter 2 1 1 neighbouring channels shall shall 1 9 Chapter 2 1 1 Immunity to digital signals on neighbouring shall shall 1 10 channels Chapter 2 1 2 RF input connector shall shall 1 11 Chapter 2 1 2 RF output connector loop trough shall shall 1 12 Chapter 3 Automated program search shall shall 2 1 Chapter 3 Manual program search shall shall 2 2 Chapter 3 1 Tuning and scanning Changes in modulation shall shall 23 parameters Chapter 3 2 Tuning and scanning dynamic PMT shall shall 2 4 Chapter 4 1 SCART interface shall shall 3 1 Chapter 4 2 Interface for Conditional Access should should 3 2 Chapter 4 3 Digital Audio Output S PDIF shall shall 3 3 Chapter 4 5 HDMI interface compliancy for HD Ready shall 3 4 Only for HDTV iDTv Chapter 4 5 HDMI interface EDID information shall 3 5 Only for HDTV STB Chapter 4 5 HDMI interface original format shall 3 6 Only for HDTV STB Chapter 4 5 HDMI interface Manual setting of resolution shall 3 7 Only for HDTV STB Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 2 Chapter 5 Real time clock shall shall 4 1 Chap
26. Comments Non compliancy can be fixed with software update YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 70 Test Task 10 9 Storing user preferences in persistent memory Requirement The user shall be able to store preferences in persistent memory Test Purpose of test procedure To verify saving of settings also in case of switching off power supply Equipment ee ae ee es MPEG DVB T UP SS EEA Transport stream used Use transport stream C Test procedure 1 Prepare test environment and setup of instruments 2 Set video format different from default 3 Set audio format different from default 4 Set user interface language different form default 5 Set program list 6 Switch the receiver OFF and disconnect power supply 7 Turn receiver ON and verify that all settings from previous steps are still set Expected result User preferences are stored in persistent memory and are not affected by disconnecting power supply Test results Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia
27. DIO support for E AC3 on HDMI output interface Requirement The receiver shall be capable of providing the following formats on the HDMI connector e Pass through of native bitstream AC3 and E AC3 E AC3 bitstream transcoded to AC3 Pass through of HE AAC bitstream Multichannel HE AAC bitstream transcoded to AC3 or DTS PCM stereo from the decoded or down mixed bitstream PCM multi channel from the decoded bitstream optional e Pass through of DTS bitstream optional 7 E AC3 mandatory after 01 01 2010 HE AAC mandatory after 01 01 2010 Test procedure Purpose of test To verify that the receiver supports E AC3 and HDMI interfaces Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport stream M Test procedure 1 Setup the system 2 Verify the HDMI output has correct bitstream format and audio is hearable correctly 3 Select stereo mode for the audio in the menu system 4 Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs 5 Select multichannel mode for the audio in the menu system 6 Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs Expected result When in receiver menu stereo is selected decoding of E AC3 shall be available at HDMI output as PCM stereo When in receiv
28. F e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 H264 SD 4 3 TV H 264 10 AVC 4 3 aspect ratio 2 S2 MPG2 SD 16 9 TV MPEG2 SD 16 9 aspect ratio 3 S3 H264 HD 16 9 TV H 264 10 AVC HD 16 9 aspect ratio E AC3 4 S4 H264 SD 4 3 TV H 264 10 AVC SD 4 3 aspect ratio Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 9 Stream G e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 7 8 Tu 32 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 H264 SD TV H 264 10 AVC 720x576i MPEG1 Layer II 2 S2 H264 SD TV H 264 10 AVC 720x576i No audio 3 S3 H264 SD TV H 264 10 AVC 720x576i No audio 4 S4 H264 HD TV H 264 10 AVC 1920x1080i AC3 2 0 5 S5 H264 HD TV H 264 10 AVC 1920x1080i AC3 3 2 6 S6 MPEG2 SD TV MPEG 2 720x576i MPEG1 Layer II BEEP 7 S7 H264 HD TV H 264 10 AVC 1920x1080i E AC3 2 0 Stream H e PSI SI PAT NIT PMT SDT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 TU 4 CH 45 666 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 720x576 TV MPEG2 720x576i MPEG1 Layer II TTX VPS 2 S2 544x5 76i TV MPEG2 544x576i MPEG1 Layer II TTX VPS 3 S3
29. HDTV AUDIO HE AAC requirement 0 ji i i nln lll lll nln nnn nn i nll ni i ilies 57 Task 7 9 HDTV AUDIO HE AAC metadata support 0 nl ll lll nnn nl ln i nln i lide 58 Task 8 1 Radio mode basic functionality 00 0 0 ll lll ll ln lll nn nn nn nn nnn nn il nll i ilies 59 Task 8 2 Radio mode radio channel list 0 0 lj lll lll lll ll nn nnn nnn nnn nnn nnn in niin 60 Task 9 1 System software UpGrade i lll nl lll nn nn nn nnn nnn nnn nnn nnn nnn nln ini ili iin 61 Task 10 1 Processing Of PSI SI tables rn rn rane renee eeanaaaeeeeeneeea 62 Task 10 2 EPG functionality for EIT actual and EIT othe 00000 0 jj jl lll ll ll li ill i iii i iii 63 Task 10 3 Presentation of EPG in Slovene lanQuade 0 0 jb itil till lll nll lll nnn lll i ill ii ilies 64 Task 10 4 Default audio language SUpport i nln nl nn nnn nnn nnn nnn nnn i i iii lillies 65 Task 10 5 CVBS teletext nion ua aa a a AINEA AN EAEAN Ee Daae inti aa aN AAEE AE A EA i 66 Task 10 6 Presentation of teletext within user interface for SDTV receivers 67 Task 10 7 User interface based teletext for HDTV Level receiver ssrsrrrrrrrrrnrnrnrnrnnnnnnnnnnnnnnnnnnnnnnnnna 68 Task 10 8 DVB SUbUtlG 2 9 lt s ccteissa ies anna arara UE baad ei EPOE EEE aaO e EEE Aaa EONA nina eidisdleyecks 69 Task 10 9 Storing user preferences in persistent MEMOL 0 0 lll i lll ll ll ili i i niin 71 Task 10 10 Reset all parameters to fact
30. HE AAC Level4 48kHz multichannel audio component with relevant signalling Transport stream used Use transport stream O Test procedure Setup the system Play the transport stream and select the appropriate service Verify the HDMI output has correct bitstream format and audio is hearable correctly Select stereo mode for the audio in the menu system Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs for the selected bitrates and sampling rates Select multichannel mode for the audio in the menu system Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs for the selected bitrates and sampling rates OTe ND Expected result Receiver supports decoding of HE AAC Level2 and 4 48 kHz and transcoding of it to AC3 or DTS and supports down mixing Test results Functionality Compliancy Decoding of HE AAC L2 48kHz Decoding of HE AAC L4 48kHz Transcoding of HE AAC L4 48kHz to AC3 at 640kbps Transcoding of HE AAC L4 48kHz to DTS 1 536Mbps Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in R
31. High Profile at Level 4 and comply with ETSI TS 101 154 chapter 5 7 H 264 AVC HDTV Test procedure Purpose of test To verify if receiver is capable of decoding MPEG 4 HD video services in different resolutions Equipment MPEG 4 DVB T UP Scag ee eying ey yaaa Transport stream used Use transport stream M Test procedure 1 Prepare test environment and setup 2 In receiver select MPEG 4 HD coded TV program 3 Set the receiver input level to 50dBm 4 Use ISMMK and check all resolutions Fill in the results Expected result Receiver is capable of decoding all listed picture resolutions Test results Resolution 1920x1080 1280x720 Conformity Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 47 Test Task 6 6 HDTV Down conversion of High Definition Video for Standard Definition output Requirement In case of SCART or if any other analogue video output Y Pb Pr or other is available the decoded High Definition video shall be down converted by SD format converter to standard definition SD resolution for output via these interfaces Picture down
32. TEST SPECIFICATIONS FOR DVB T RECEIVERS USED IN REPUBLIC OF SLOVENIA VERSION 1 1 DATE 29 07 2009 TEST SPECIFICATIONS FOR DVB T RECEIVERS USED IN REPUBLIC OF SLOVENIA PROFILE BASIC SDTV Standard definition television HDTV High definition television Date 29 07 2009 TEST SPECIFICATIONS FOR DVB T RECEIVERS USED IN REPUBLIC OF SLOVENIA VERSION 1 1 DATE 29 07 2009 Document prepared for Post and Electronic Communications Agency of the Republic of Slovenia By Sintesio foundation Ljubljanska 5 SI 4260 Bled SLOVENIA www sintesio org Tel 386 4 207 3393 Fax 386 4 207 39 393 Contents 1 TINthOCUCtlON MEE cdecdesccedeteas cae cecesieed cdeeendasdedceedateas coectcadedcasadaceceededeedateverdeeaedies caves coasted dcedavseactcesteaecdenctaeds 2 tist Of ADDFeViAtlONS vei cvviess cdecececsa riers deutuce anu ceeesuesveertuncveersuescabeeeenecicueenccetysnevucvecetederdsacerersaccdecteineedectsenelaves 3 Reference COCUIMENIUS sidii iid e iaaa niadevtedred AE a vceweecay aa nate aapea aa aeaaea a ii 4 Data AbOUt receiver ics ia caedescevesiseiendeaucctensvenreceacececuvssstsecnedceccavedeved edegeeedecuecduaceanesscatedecdesteasicccaveaseseatedesedereadass 5 Used transport Stream naai neit er e a a aa daa ada aa Ble Ma vav vain ban ev acre aa a aA ave deh wernt 6 Quality measurement method 0 I EE II EEE nn Een nee eeeaa a aaneeeeeeaaaa 7 Test environment ANd ACCESSOFICS ic cccisescscesscebcececdacseadedacds
33. UBLIC OF SLOVENIA VERSION 1 0 DATE 28 10 2008 In this document universal term RECEIVER refers to all devices capable to receive DVB T signal in order to present AUDIO and VIDEO content iDTV STB other devices In case some tests or wording don t apply for all devices it is noted for which types it is relevant For receivers on the Slovenian market after 01 01 2010 for SDTV level devices support for audio decoding AAC is mandatory for HDTV level devices additionally support for audio decoding of HE AAC and E AC3 is mandatory It is recommended to support all standards already before listed date For evaluation of compliancy tests from the table has to be performed and the compliancy has to be documented and signed In case of non compliancy with requirements the deviation should be noted and additionally commented Req spec Description SPIN ne Task Comment level level Automatic scan through the whole frequency Chapter 2 1 1 range UHF and VHF shall shall 1 1 Chapter 2 1 1 Frequency band and offset shall shall 1 2 Performance in Single Frequency Networks Chapter 2 1 1 echo inside the guard interval shall shall 1 3 Performance in Single Frequency Networks Chapter adi echo outside the guard interval shal hel ce Chapter 2 1 1 Transmitting parameters shall shall 1 5 Chapter 2 1 1 _ Maximum Receiver Signal Input Level shall shall 1
34. al test is done also while performing all other tests because remote control is required for tests Expected result Remote control complies with requirement Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 73 Test Task 12 1 Factory presets Requirement For HDTV Level receivers following pre settings shall be enabled e Default language for User interface and subtitling set to SLOVENE Default codepage for Slovene language IEC 8859 2 Subtitling ON enabled Analogue video output format 4 3 16 9 letterbox conversion ON OTA System Software Upgrade ON enabled Default digital audio output set to PCM Stereo according to IEC 60958 Test procedure Purpose of test To verify that parameters settings from requirement are selected according to country selection Equipment MPEG DVB T UP DVB T STB source Modulator converter Test procedure Prepare test environment and setup of instruments Perform factory reset of receiver Select first use and follow the procedure Verify if all required parameters are set according to requirement and fill the test results spe COUN Expected result All pr
35. amic changes in the PMT shall not produce any disturbances in the Audio Video output In case switching of elementary audio and or video streams is triggered the maximum switching time measured from PMT update to clear picture shall be 3 seconds For triggering the change in descriptor version_id shall be used Test procedure Purpose of test To verify if the receiver is capable of continuous reception in case of adding changing or removing PID data in PMT table Equipment MPEG 4 DVB T UP ESETET 2 Re ae PSY ey ee Network operator can occasionally add change or remove some regional program In case the scenario happens also descriptor version version_id inside PMT is changed Transport stream used Use transport stream L Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream and select service S1 3 Remove program identifiers PID in following order a Teletext PID b Audio PID c Video PID 4 Add program identifiers PID in following order a Video PID b Audio PID c Teletext PID 5 Check the picture and sound continuously and verify that decoding of service is correct 6 Change following program identifiers PID a Video PID b Audio PID Expected result After adding identifiers PID all components of program are decoded correctly Change of identifiers is not affecting the decoding of program Test results Conformity L Compliant C Non co
36. analogue audio and analogue video interface with SCART connector 3 Inside user interface select 4 3 setting for output picture format 4 Play transport stream 5 Select service including 4 3 content with appropriate AFD signaling 6 Verify the presence of analogue video and audio signal on SCART interface 7 Check the decoded and converted analogue video output format and fill the data into the table 8 Check the voltage on PIN 8 and the WSS signaling on the SCART interface and fill the data into the table 9 Inside user interface select 16 9 setting for output picture format and repeat steps from 4 to 8 10 Inside user interface select 4 3 setting for output picture format 11 Repeat the steps from 6 to 9 for service including 16 9 content and with appropriate AFD signaling Transport stream used Use transport stream F Expected result The receiver has functional SCART interface with analogue stereo audio output and RGB CVBS or other video signals present The decoded output picture has correct format and signaling is made according to IEC 62216 1 6 4 3 Active format description Test results 4 3 source aspect ratio signaled 4 3 16 9 Functionality Display type display display Voltage on SCART PIN 8 WSS Decoder format conversion Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 32 16 9 source aspect ratio signaled 4 3 16 9 Functionality
37. ate _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 44 Test Task 6 3 MPEG VIDEO Decoder decoding of MPEG 4 SD resolutions Requirement The decoder of the receiver shall fully comply with standard ISO IEC 14496 10 for decoding MPEG 4 and shall support profile H 264 AVC Main Profile at Level 3 used for H 264 AVC SDTV and comply with ETSI TS 101 154 chapters 5 5 and 5 6 25 Hz SDTV Test procedure Purpose of test To verify if receiver is capable of decoding MPEG 4 SD video services in different resolutions Equipment MPEG 4 DVB T UP es ea ee ee Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup 2 In receiver select MPEG 4 SD coded TV program 3 Set the receiver input level to 50dBm 4 Use ISMMK and check all resolutions Fill in the results Expected result Receiver is capable of decoding all listed picture resolutions Test results Resolution 720x576 544x576 480x576 352x576 Conformity Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signat
38. aying of Slovene characters according to requirement Transport stream used Use transport stream I Expected result The receiver is using code table ISO IEC 8859 2 and presents Slovene characters correctly Test results Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 64 Test Task 10 4 Default audio language support Requirement _ The receiver shall be able to use the default preferences for audio language If an audio stream for the default audio language is available for the service the receiver shall automatically choose that audio stream Test Purpose of test procedure To verify the possibility of auto selecting the audio according to the language settings Equipment Receiver under test Transport stream used Use transport stream I Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream 3 Inside user interface select the language for presentation of AUDIO content 4 Tune to service including different languages 5 Check if audio is presented in the language set in point 3 Expected result The receiver automatically selects the audio content according to saved user prefe
39. be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 25 Test Task 2 1 Automatic program search Requirement The receiver shall provide function of automatic program search trough whole frequency range In case the receiver finds all 3 same identifiers e Original_network_id e Transport_stream_id and e Service_id on two or more different frequencies has to save both frequencies or select the frequency with better signal Before the automatic search is started all service lists shall be deleted Test Purpose of test procedure 1 To verify that receiver is capable of scanning whole frequency band 2 To verify the best service selection in automatic channel search when the content of the transport stream is the same on several transmitters Equipment MPEG 4 source Monitor UP converter CH x DVB T Modulator Noise generator Fading simulator DVB T STB UP converter CH y Spectrum analyzer On terrestrial network there is possibility to receive several transmitters simultaneously These transmitters can have the same content exactly but are transmitted on different channels frequencies Therefore it is important that the receiver can in automatic channel search choose the services which have the best reception
40. coded to AC3 e Pass through of AC3 bitstream e Multichannel HE AAC bitstream transcoded to AC3 or DTS e PCM stereo from the decoded or down mixed bitstream e Pass through of DTS bitstream optional E E AC3 mandatory after 01 01 2010 HE AAC mandatory after 01 01 2010 Test procedure Purpose of test To verify that the receiver supports HE AAC in S PDIF interfaces Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter The TS shall contain services which has e HE AAC Level2 48kHz mono stereo audio component with relevant signalling e HE AAC Level4 48kHz multichannel audio component with relevant signalling Transport stream used Use transport stream O Test procedure 1 Setup the system 2 Verify the S PDIF output has correct bitstream format and audio is hearable correctly 3 Select stereo mode for the audio in the menu system 4 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs 5 Select multichannel mode for the audio in the menu system 6 Verify the S PDIF output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs Expected result The receiver supports the HE AAC on S PDIF according to requirements Test results Conformity PCM stereo from the decoded or down mixed bitstream Multichannel HE AAC bitstream transcoded
41. conversion shall be implemented from any of the incoming encoded HD full screen luminance resolution of 1920x1080 and 1280x720 as an OPTION also from 1440x1080 1280x1080 960x1080 960x720 and 640x720 to 720x576 standard definition SD resolution Down converted video shall be displayed as 16 9 letterbox on 4 3 displays The SD format converter should apply appropriate re interlacing Test procedure Purpose of test To verify that the receiver down converts the HD video signal to analogue video connectors Equipment MPEG 4 DVB T UP SS SS SS Transport stream used Use transport stream M Test procedure 1 Prepare test environment and setup 2 Play transport stream including resolution 1920x1080 and 1280x720 3 Use ISMMK and check delivering SDTV signal for all Standard Definition outputs Expected result The SCART or any other analogue video output not higher than 576i is delivering SDTV signalling Test results Resolution 1920x1080 1280x720 Conformity Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 48 Test Task 7 1 SDTV AUDIO decoder Requirement
42. e 4 Check the conformity according to ISMMK Expected result All programs inside transport stream are decoded correctly Test results Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 41 Test Task 5 2 MPEG Demultiplexer support of variable bitrate statistical multiplexing Requirement The demultiplexer shall be compliant to the MPEG 2 transport layer defined in ISO IEC 13818 1 and ETSI TS 101 154 and shall support variable bitrate elementary streams within a constant bitrate transport stream Test Purpose of test procedure To verify that the receiver can decode a variable bitrate video stream statistical multiplexing Equipment see pe eee ots II MPEG 4 DVB T UP i Se oe Transport stream used Use transport stream E Test procedure 1 Prepare test environment and instruments 2 In receiver menus select program using variable bitrate 3 No noise added 4 Signal level on receiver input shall be set to 60 dBm 5 Check the picture for 5 minutes according to ISMMK Expected result The receiver is capable displaying an error free picture during 5 minutes Test resu
43. e fixed with software update YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 21 Test Task 1 9 Immunity to analogue signals on neighboring channels Requirement The receiver shall operate also when analogue signals are present on neighboring or other channels Test Purpose of test procedure To verify the reception when there is interference from analogue TV on adjacent channel The level of analogue signal shall be 33 dB or more higher than DVB T signal The receiver shall allow reception according to QEF also in presence of 44 dB or greater analogue signal on any other channel inside frequency band The test is performed using DVB T signal with modulation parameters 8K 64 QAM R 2 3 A Tu 1 4 Equipment UP eee iea ace converter source oduiator CH x Spectrum analyzer Monitor UP l ANALOG converter DVB T STB generator CHy ATT _ Transport stream used Use transport stream C Test procedure 1 Prepare test environment and setup of instruments 2 Use analogue PAL signal with added teletext and 75 of colour program and FM stereo audio content 3 The levels of analogue and digital signal should be checked using spectrum analyzer and set to the level of 28 dBm 4 Use mode 8k 64 QAM R 2 3 A Tu 1 4 5 Set the reception of DVB T sig
44. e receiver Verify that the receiver selects the display parameters according the EDID information Expected result The receiver uses the EDID information for the display parameters Test results Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 37 Test Task 3 6 HDMI interface original format Requirement The HDTV Level STB shall provide an Original Format option i e to output the same format as received if supported by the display as indicated by the EDID information If the received format is not supported the STB shall select the display mode providing the best possible video quality This is to avoid the STB output to go black if there is a mismatch between received format and display capabilities Test Purpose of test procedure To verify that the receiver is able to use the EDID information This test is relevant for STB only For other receivers having HDMI output interface this test is optional Equipment MPEG 4 DVB T UP z TV Transport stream used Use transport stream B and M Transport stream shall include programs with following picture resolutions e 720 x 576i 25 e 1280 x 720p 50 e 1920 x
45. ent Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 23 Test Task 1 11 RF input connector Requirement The receiver shall have at least one tuner input connector in accordance with IEC 60169 2 part 2 and shall allow the connection to external antenna with connector type IEC 169 2 male The input impedance shall be 75 Ohm Test Purpose of test procedure To verify that the receiver has a correct input connector for the reception of the DVB T signals Equipment Receiver under test Test procedure 1 Verify that the RF input connector is accordance the specification IEC 60169 2 2 Verify in the manufacturer s technical specification that the input impedance of the RF input is 75Q Expected result RF input connector is as defined in specification IEC 60169 2 and the input impedance is 75Q Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 24 Test Task 1 12 RF output connector loop
46. epublic of Slovenia v1_1 doc Page 57 Test Task 7 9 HDTV AUDIO HE AAC metadata support Requirement The HDTV level receiver shall support the use of the following metadata embedded in the audio stream when decoding HE AAC and transcoding multichannel HE AAC to AC3 or DTS e Dynamic Range Control according to ISO IEC 14496 3 e Program Reference Level according to ISO IEC 14496 3 e Mix Down Parameters according to Transmission of MPEG4 Ancillary Data part of DVB specification ETSI TS 101 154 Test Purpose of test procedure To verify that the receiver supports HE AAC metadata Equipment Home ne ta D G DVE T STE nema system The TS shall contain a service which has the following metadata included in audio component e aacPlus Dynamic Range Control equivalent to Dolby Dynamic Range Control e aacPlus Program Reference Level equivalent to Dolby Dialogue Normalization according to ISO IEC 14496 3 2005 Audio 3rd edition e Mix Down Parameters Transport stream used Use transport stream O Test procedure 1 Setup the system 2 Connect audio decoder to HDMI output 3 Verify that the receiver supports metadata correctly for decoding of the HE AAC stereo or transcoding HE AAC multichannel to AC3 or DTS 4 Verify that the receiver supports down mixing to stereo output Expected result The receiver shall support HE AAC metadata according to requirements Test results Conformity L Compliant C Non
47. equency band except on the channel representing image channel Image channel is the channel which after mixing with the local oscillator will also produce the intermediate frequency Equipment UP MPEG 4 DVB T converter source 1 Modulator CH x Spectrum analyzer Monitor UP converter DVB T STB CH y MPEG 4 DVB T source 2 Modulator Transport stream used Use transport stream B and C Test procedure 1 Prepare test environment and setup of instruments 2 The levels of digital signal shall be checked using spectrum analyzer and set to the level of 28 dBm Use mode 8k 64 QAM R 2 3 A Tu 1 4 Receiving DVB T channel shall be set to channel C36 Other DVB T disturbing channel shall be set to channel C37 Attenuate the level of receiving DVB T signal until ISMMK is still fulfilled Write the difference of receiving and disturbing DVB T signal level in dB into the results table 8 Repeat the test using disturbing signal on channels C40 in C46 EON A G3 Expected result The receiver is operating at least in required disturbing useful signal ratios on channels 36 40 and 46 Test results Ratio of disturbing useful channel up to which the receiver operates on C36 dB Ratio of disturbing useful channel up to which the receiver operates on C40 dB Ratio of disturbing useful channel up to which the receiver operates on C46 dB Conformity LI Compliant _ Non compliant _ Major deviation _ Minor deviation comm
48. er menu multichannel is selected decoding of E AC3 shall be supported in all formats according to below e E AC3 pass through e Transcoded to AC3 e PCM stereo downmix Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 51 Test Task 7 3 HDTV AUDIO support for E AC3 on S PDIF output interface Requirement The receiver shall be capable of providing the following formats on the S PDIF connector e E AC3 bitstream transcoded to AC3 e Pass through of AC3 bitstream e Multichannel HE AAC bitstream transcoded to AC3 or DTS e PCM stereo from the decoded or down mixed bitstream e Pass through of DTS bitstream optional E AC3 mandatory after 01 01 2010 HE AAC mandatory after 01 01 2010 Test procedure Purpose of test To verify that the receiver supports E AC3 on S PDIF interfaces Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport stream M Test procedure 1 Setup the system 2 Verify the S PDIF output has correct bitstream format and audio is hearable correctly 3 Select stereo mode for
49. erface compliancy for HD Ready Requirement HDTV level receiver with display iDTV shall support the requirements that are specified for high definition video interfaces by EICTA for compliant HD Ready iDTV sets HDTV level receiver without display STB shall have at least one High Definition Multimedia Interface HDMI with type A connector supporting displays that comply with the EICTA HD Ready requirements Test procedure Test procedure The Manufacturer shall verify the HD Ready certificate Expected result HDMI interface complies to requirements for HD Ready certificate Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 36 Test Task 3 5 HDMI interface EDID information Requirement HDTV level receiver shall be able to use the EDID information provided by the display to automatically determine the STB output Test Purpose of test procedure To verify that the receiver is able to use the EDID information This test is relevant for STB only For other receivers having HDMI output interface this test is optional Equipment MPEG 4 DVB T UP Tv Test procedure Power On th
50. esets are implemented Test results Expected result Compliancy Default codepage for Slovene language IEC 8859 2 Subtitling ON enabled Analogue video output format 4 3 set to 16 9 letterbox conversion OTA System Software Upgrade ON enabled Default digital audio output_set to PCM Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 74
51. etup the system 2 Verify the HDMI output has correct bitstream format and audio is hearable correctly 3 Select stereo mode for the audio in the menu system 4 Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs 5 Select multichannel mode for the audio in the menu system 6 Verify the HDMI output has correct bitstream format and audio is hearable correctly in digital and analogue audio outputs Expected result When in receiver menu stereo is selected decoding of HE AAC Level 2 stereo shall be available at HDMI output as PCM stereo When in receiver menu multichannel is selected decoding of HE AAC Level 4 multichannel shall be supported in all formats according to below HE AAC pass through Transcoded to AC3 Transcoded to DTS PCM stereo downmix e o o Test results Conformity LI Compliant _ Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 55 Test Task 7 7 HDTV AUDIO support for HE AAC on S PDIF output interface Requirement The receiver shall be capable of providing the following formats on the S PDIF connector e E AC3 bitstream trans
52. evasscecededanetesetanetesdcasduesaueracedadadecedarsiseadetadedersraees BA TO StINGtASKS ccc cectcet ine ceceauccdaeansccccdennccusdegece cocuevtedesdaincgcdtacicadedsitesusuiel ei svcvnunycudeuiedthastnesdcuvucedeuxseteendusensndvtee Task 1 1 Automatic scan through the whole frequency range UHF and VHP eee 14 Task 1 2 Frequency band and offset issiria ioana lacese ta a EEKE EAEN E a Ei 15 Task 1 3 Performance in Single Frequency Networks echo inside the guard interval 16 Task 1 4 Performance in Single Frequency Networks echo outside the guard interval ccccccccsssseeeeeeeees 17 Task 1 5 Transmitting parameters 0ccccccccsecedecececsenseseeceeeeeeevececceseeddaeaeeceseeseetaendaeaeaeateesenederesedtsseenenererens 18 Task 1 6 Maximum Receiver Signal Input Level 0000 00 jj jj lll lll lll nn ln nl nn nnn i ili iii 19 Task 1 7 Signal level and signal quality indicator 0000 00 lll i lll lll nll nln i nl ln iin iii 20 Task 1 8 Performance in SFN networks on Gaussian channel with presence of noise in input signal 21 Task 1 9 Immunity to analogue signals on neighbouring channels 0 eee 22 Task 1 10 Immunity to digital signals on neighbouring channels 0 ieee 23 Task L 11 SRE input CONNCCHOF neiii an aaan eaan aaea E ra ETa EA Eaa aA AENA NA AAS A AEEA E a a 24 Task 1 12 RF output connector loop trough hl i ll ln nln nnn nnn nnn nn nn
53. f instruments Play transport stream Perform automatic program search Select service including only teletext subtitling without DVB teletext Fill in the test protocol Switch to service including both subtitling types using teletext and using DVB subtitling 7 Verify that the DVB subtitling is the only component that the receiver displays 8 Fill in the test protocol 9 Verify that the DVB subtitling is in synchronization with the video 10 Fill in the test protocol 11 Inside user interface disable the subtitling 12 Verify there is no subtitling or only teletext subtitling is active in case still transmitted 13 Inside user interface enable the subtitling and verify the functionality DVB subtitles default 14 Fill in the test protocol TP ON iE Expected result All test results are OK Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 69 Test results Procedure point 5 Expected result Compliancy Teletext subtitling active Procedure point 8 Expected result Compliancy DVB subtitling active Procedure point 10 Expected result Compliancy DVB subtitling in synchronism with video Procedure point 14 Expected result Compliancy It is possible to turn DVB subtitling ON OFF Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment
54. for stereo audio output 13 Verify the presence of sound on stereo output and fill in the results 14 In user interface select AC 3 audio for digital output 15 Verify the functionality of AC3 coder on digital optical or coaxial output and fill in the results Oy es Expected result Audio decoder complies with requirement for audio coding Test results Requirements Conformity Receiver is capable to decode MPEG1 layer II bitstream Receiver is capable to switch decoding of audio from AC3 to MPEG 1 Layer II in case there is no AC3 bitstream in receiving service and the user selected AC3 on digital output Receiver is capable to decode AC3 bitstream Receiver supports stereo downmix from multichannel AC3 bitstream Receiver is capable to decode AAC bitstream Receiver is capable to switch decoding of audio from AC3 to AAC in case there is no AC3 bitstream in receiving service and the user selected AC3 on digital output Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 49 Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 50 Test Task 7 2 HDTV AU
55. g time to measure such a low BER at TS data level Therefore the reception quality can be evaluated either indirectly by measuring the BER after Viterbi decoder or by subjectively inspecting the video screen for a certain period of time and looking for errors in the decoded video ISMMK Indirect subjective quality measurement method The subjective measurement is performed during 15 seconds During this time the decoded video shall be error free In a case of an error in decoded video the change to the measurement configuration parameters shall be done The change of the measurement configuration parameters shall lead to an error free decoding of the video where the minimum time between consecutive subjective errors is 15 seconds Otherwise the change of the measurement configuration parameters is repeated until an error free decoding of video is reached at least 15 seconds 7 Test environment and accessories MPEG 2 and MPEG 4 source including sound and video content re multiplexer 2 x DVB T Modulator with IF output Fading simulator Noise generator DVB T UP converter for conversion from IF to RF Analogue TV RF modulator with generator of PAL STEREO and teletext Spectrum analyzer Power meter 10 Universal measuring instrument for voltage and current 11 TV Monitor supporting 4 3 and 16 9 aspect ratio HDMI interface 12 Audio receiver with S PDIF and HDMI interface 13 Connection cables dividers connectors attenua
56. ide option to manually set offset according to GMT Transport stream used Use transport stream A Expected result The real time clock and date is updated from transport stream information Test results Conformity L Compliant C Non compliant Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 40 Test Task 5 1 MPEG Demultiplexer maximum transport stream data rate Requirement The demultiplexer shall be compliant to the MPEG 2 transport layer defined in ISO IEC 13818 1 and ETSI TS 101 154 and shall be able to decode an ISO IEC 13818 1 stream with data rates up to 32 Mbit s Test procedure Purpose of test Purpose of the test is to verify that demultiplexer operates at highest transport stream data rates 32 Mbit s including one or more programs including sound and teletext components Equipment MPEG4 DVB T UP DVB T STB l source Modulator converter Lae a Transport stream used Use transport stream G Test procedure 1 Prepare test environment and instruments 2 On UP converter select channel C45 and use modulation parameters 8k 64 QAM R 7 8 A Tu 1 8 3 Select program prom transport stream with high data rat
57. ignal Digital Video Broadcasting Terrestrial Enhanced AC3 known as Dolby Digital Plus Event Information Table European Norm Electronic Programming Guide European Telecommunication Standards Institute High Efficiency AAC High Definition Multimedia Interface High Definition Television Integrated Digital TV set International Organization for Standardization Indirect subjective quality measurement method International Telecommunication Union Multi Frequency Network Multimedia Home Platform Moving Pictures Expert Group Network Information Table Program Association Table Pulse Coded Modulation Program Map Table Program Specific Information Quadrature Amplitude Modulation Quaternary Phase Shift Keying Radio Frequency Red Green Blue Service Description Table Standard Definition Television Single Frequency Network Service Information Set top Box Time and Date Table Time Offset Table Transport Stream Ultra High Frequency Vertical Blanking Information Variable Bitrate Very High Frequency Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 4 Reference documents 1 EN 300 744 v1 5 1 DVB Framing structure channel coding and modulation for digital terrestrial television ETSI 2 IEC 60169 2 part 2 Radio frequency connectors Part 2 Coaxial unmatched connector 3 ETSI TS 101 15
58. l offer basic functionality of EPG in order to present following EIT actual present following scheduled EIT other present following scheduled Test procedure Purpose of test To verify the EPG functionality of receiver Equipment MPEG DVB T UP Modulator DVB T STB l a Transport stream used Use transport stream I Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream and check the presenting of EPG Expected result The receiver is presenting EPG information correctly Test results Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 63 Test Task 10 3 Presentation of EPG in Slovene language Requirement The navigator shall be presented in SLOVENE language and EPG shall support characters from code table ISO IEC 8859 2 Test Purpose of test procedure To verify if the navigator is presented in SLOVENE language and supports characters from code table ISO IEC 8859 2 Equipment Receiver under test Test procedure 1 Prepare test environment and setup of instruments 2 Inside user interface check the correct displ
59. ltiplexer support of variable bitrate statistical multiplexing eee 42 Task 6 1 MPEG VIDEO Decoder Audio video synchronization 00000 0 jit iii i i i iii i i iii ieee 43 Task 6 2 MPEG VIDEO Decoder decoding of MPEG 2 SD resolutions 00000 i ieee 44 Task 6 3 MPEG VIDEO Decoder decoding of MPEG 4 SD reSOIUtionS 000 ieee 45 Task 6 4 MPEG VIDEO Decoder minimum bitrate 0 00 0 i i i ll ll ll ll nln nll iin i i iii 46 Task 6 5 MPEG VIDEO Decoder decoding of MPEG 4 HD resolutions 0000 0 jenn 47 Task 6 6 HDTV Down conversion of High Definition Video for Standard Definition output 0 ee 48 Task 7 1 SDTV AUDIO C COdGI iiss iarr rrna a aa TAa eE a ENE udev ated Ea aan EEan ENEE dose 49 Task 7 2 HDTV AUDIO support for E AC3 on HDMI output interface ssssssssssssssssrrrrrrseestrnrnnrrrnnnrnnnnnnnenn 51 Task 7 3 HDTV AUDIO support for E AC3 on S PDIF output interface eeeeceeeeeeeesseeeeeeeeeeeeeaaaaeeeeeenees 52 Task 7 4 HDTV AUDIO E AC3 requirement 0 0 i i nln ll ln nln nnn nnn linden 53 Task 7 5 HDTV AUDIO E AC3 metadata SUPPOTt i ll lll ln nnn nnn i ini lin iii iii 54 Task 7 6 HDTV AUDIO support for HE AAC on HDMI output interface ccccceceeeeeeeesseeeeeeeeeeeesaaaaeeeeeeees 55 Task 7 7 HDTV AUDIO support for HE AAC on S PDIF output interface cccececeeeeeeeeeseeeeeeeeeeeeesaaaeeeeeeeees 56 Task 7 8
60. lts Conformity LI Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 14 Test Task 1 2 Frequency band and offset Requirement The receiver shall allow reception of terrestrial signal on UHF channels 21 69 The receiver shall tune to center frequency of receiving DVB T signal also considering following frequency offset fc 474 MHz N 21 x 8 MHz foff N e 21 69 UHF channel number fort 10 kHz 10 kHz Test Purpose of test Procedure To verify the reception of DVB T signal for UHF band considering frequency offset of receiving signal Equipment ee ee L ae oe Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Testis performed in mode 8k 64 QAM R 2 3 A Tu 1 4 3 Signal level on receiver input shall be set to 60 dBm 4 Start the test on channel 21 foff 0 5 Connect the receiver 6 Perform the test according to frequency values and offset values in this task When changing the frequency and offset foff disconnect the input signal from receiver input
61. lts Conformity L Compliant C Non compliant Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 42 Test Task 6 1 MPEG VIDEO Decoder Audio video synchronization Requirement The decoder of receiver shall ensure synchronization between AUDIO and VIDEO as follows audio shall never lead the video program by more than 20 ms and shall never lag the video by more than 45 ms Test procedure Purpose of test To verify if relative position between audio and video content complies with requirement Equipment MPEG 4 DVB T UP es ea es ee Transport stream used Use transport stream A Test procedure 1 Prepare test environment and instruments 2 Signal level on receiver input shall be set to 50 dBm 3 Play transport stream including test sequence for measuring delay of audio and video 4 Delay shall be measured with instruments 5 Verify that the deviation is inside prescribed limits For iDTV 1 Prepare test environment and connect the components 2 Perform subjective validation of sound and picture synchronization Expected result Relative difference of audio and video shall be inside limits 25 ms and 45 ms Test results Conformity
62. matically and starts to operate normally without any user action Equipment MPEG 4 source Monitor UP converter DVB T Fading Noise Modulator simulator generator CHx DVB T STB Transport stream used Use transport stream I Test procedure Prepare test environment and setup of instruments Use channel C45 Set the RF input level of receiver to 50 dBm Use modulation parameters 8K 64 QAM R 3 4 A Tu 1 4 Connect the input of receiver Use quality measurement according to ISMMK Fill in the results Repeat the test for other modes without disconnecting the receiver input according to the table Test results 00 GV BOI INE Expected result The receiver is able to detect change of the DVB T modes and re synchronize to the changed DVB T mode within 3 seconds Test results Mode Conformity 8K 64 QAM R 3 4 A Tu 1 4 8K 64 QAM R 3 4 A Tu 1 8 8K 64 QAM R 2 3 A Tu 1 8 8K 64 QAM R 2 3 A Tu 1 4 8K 16 QAM R 3 4 A Tu 1 8 Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 30 Test Task 2 4 Tuning and scanning dynamic PMT Requirement Dyn
63. metadata according to requirements Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 54 Test Task 7 6 HDTV AUDIO support for HE AAC on HDMI output interface Requirement The receiver shall be capable of providing the following formats on the HDMI connector e Pass through of native bitstream AC3 and E AC3 E AC3 bitstream transcoded to AC3 Pass through of HE AAC bitstream Multichannel HE AAC bitstream transcoded to AC3 or DTS PCM stereo from the decoded or down mixed bitstream e PCM multi channel from the decoded bitstream optional e Pass through of DTS bitstream optional 7 E AC3 mandatory after 01 01 2010 HE AAC mandatory after 01 01 2010 Test procedure Purpose of test To verify that the receiver supports HE AAC on HDMI interfaces Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter The TS shall contain services which has e HE AAC Level2 48kHz mono stereo audio component with relevant signalling e HE AAC Level4 48kHz multichannel audio component with relevant signalling Transport stream used Use transport stream O Test procedure 1 S
64. mpliant Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 31 Test Task 3 1 SCART interface Requirement The receiver shall have at least one SCART Interface in accordance with EN 50049 1 and EN 50157 2 1 On the SCART interface CVBS and RGB signal shall be present including correct signalling with either LINE23 WSS and or voltage levels on a SCART PIN8 as defined by IEC 62216 1 6 4 3 Active format description The SCART interface shall deliver also analogue audio signal Test Purpose of test procedure To verify the presence and functionality of SCART interface and signalling of appropriate picture formats on SCART PIN 8 and or with WSS defined by IEC 62216 1 6 4 3 Active format description It is possible that some TV sets don t use this kind of signalling for switching between picture formats Test is not directly applicable for iDTV However the response of an iDTV to the broadcasted active formats shall be equivalent to the combined response of a STB and a 16 9 connected monitor except for the signalling on the SCART interface Equipment MPEG 4 DVB T UP TV Test procedure 1 Prepare the test environment 2 Verify that receiver has at least one
65. n and control of the local hardware software according to EN 300 468 and ETSI TR 101 211 The following tables are a mandatory set of tables the receiver shall be able to process NIT CAT option PAT PMT SDT EIT TDT TOT Test Purpose of test procedure To verify static and dynamic processing of PSI SI tables Equipment P MPEG DVB T UP a e NA Transport stream used Use transport streams H and I Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream H and write down the content of NIT EIT parental SDT 3 Put the receiver to Standby 4 Play transport stream I 5 Turn the receiver ON 6 Verify that the content of the information is updated in the receiver service list 7 Repeat the test and in point 2 disconnect the power from receiver Expected result Changes generated in transport streams are processed Test results Conformity Toggling from ON Standby Toggling ON Power OFF Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update L_ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 62 Test Task 10 2 EPG functionality for EIT actual and EIT other Requirement The receiver shal
66. nal to C36 6 Set the analogue signal to channel C37 7 DVB T signal shall be attenuated using attenuator up to the level that the ISMMK method is fulfilled 8 Write the difference of analogue and DVB T signal level in dB into the results table 9 Repeat the test for analogue signal on channel C46 Expected result The receiver can operate at least under presence of analogue and digital signal on channels 36 and 46 Test results Ratio of analogue DVB T signal up to which the receiver is working on C36 dB Ratio of analogue DVB T signal up to which the receiver is working on C46 dB Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 22 Test Task 1 10 Immunity to digital signals on neighbouring channels Requirement The receiver shall operate also when digital signals are present on neighbouring or other channels Test procedure Purpose of test Check the performance of receiver in case digital signal is present on neighbouring channel and the signal level of neighbouring channel is 22 dB higher than received DVB T signal The receiver shall operate according to QEF also in case of 38 dB or higher DVB T signal on any other channel of fr
67. nd functions carrying out upgrade in the receiver Test Purpose of test procedure To verify if the receiver provides at least one mechanism for upgrading system software To verify if HDTV level receiver supports and use OTA System Software Update procedure according to the ETSI TS 102 006 Equipment Receiver under test SW user manual cables Test procedure 1 Prepare test environment and setup of instruments depending on upgrade method 2 Get the upgrade file in case of upgrade via RS232 USB 3 Perform the upgrade according to user manual of manufacturer in case of upgrade via RS232 USB 4 In user interface select option for automatic upgrade over DVB T network mandatory for HDTV level receivers 5 Check in user manual if prescribed upgrade procedure is supported by manufacturer Expected result Using one of upgrade methods it is possible to upgrade the receiver Test results Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 61 Test Task 10 1 Processing of PSI SI tables Requirement The receiver shall have system software for interpretation and handling of the active service informatio
68. o output using lines 6 22 and 320 335 Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 66 Test Task 10 6 Presentation of teletext within user interface for SDTV receivers Requirement The SDTV Level receiver shall offer at least one of following options for presentation of Teletext By insertion of the Teletext data in the VBI of the analogue CVBS video output Insertion shall conform to ITU R BT 653 3 and to requirements for level 1 5 defined in ETS 300 706 By presentation of Teletext within the navigator of the receiver Test procedure Purpose of test To verify the presentation of teletext within the navigator of the receiver Equipment MPEG DVB T UP Modulator DVB T STB l ape ee Transport stream used Use transport stream C Test procedure 1 Prepare test environment and setup of instruments 2 On receiver input connect signal with included teletext 3 By pressing button for teletext on receiver remote control check the teletext presentation 4 Check the presentation of Slovene characters Expected result The teletext data is presented correctly in
69. of Slovenia v1_1 doc Page 19 Test Task 1 7 Signal level and signal quality indicator Requirement Within the user interface the receiver shall provide the information of signal level and signal quality The implementation of user interface is responsibility of the producer Test procedure Purpose of test To verify function of signal indicator Equipment MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Tune the system to channel 45 3 Set the receiver input level to 23 dBm 4 Decrease the level of input signal step by step and check the reaction of signal level and quality indicator inside user interface Expected result The indicator of input signal level and quality is reacting to actual signal level Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 20 Test Task 1 8 Performance in SFN networks on Gaussian channel with presence of noise in input signal Requiremen
70. ory mode li ll ll ln nnn nnn nnn nnn i iii i ilies 72 Task 11 12 Remote Controli siini oinaan naaa aged esbuaa EE Aa Era Paaa EE Taaa EE ta 73 TEST SPECIFICATIONS FOR DVB T RECEIVERS USED IN REPUBLIC OF SLOVENIA VERSION 1 1 DATE 29 07 2009 Task 1251 Factory presets siioni nnrir eidean ariar kera aiiis da enetardeetdastie nET Easa 74 Document history Version Date Comments V1 0 08 01 2009 First approved version including SDTV and HDTV tests V1 1 29 07 2009 Editorial typing changes performed Reference document 10 version updated Change in chapter 5 Used transport streams description of streams and programs inside streams changed due to preparation of actual test streams Additional description of used transport stream added to tests where this was missing until now or adopted according to changes in chapter 5 Change in chapter 5 Used transport streams specification of transmitted service type according to updated version of ETSI EN 300 468 v1 9 1 10 Change in test 10 8 no priority between DVB and Teletext subtitling Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 1 1 Introduction Test specifications are established in order to ensure that decoders comply with the common minimum requirements for use in Republic of Slovenia Background for the tests is the document REQUIREMENT SPECIFICATIONS FOR DVB T RECEIVERS USED IN REP
71. ovenia v1_1 doc Page 59 Test Task 8 2 Radio mode radio channel list Requirement _ If a DVB stream is labeled as a Radio Service it should always be shown by the STB in the radio channel list even if there might be an elementary video stream sent along Test Purpose of test procedure To verify if STB includes in service list all services labeled as Radio service Equipment Receiver under test MPEG 4 DVB T UP Tv Test procedure 1 Prepare test environment and setup of instruments 2 Play transport stream including radio services and video stream 3 Check if the radio services are listed in radio services list Transport stream used Use transport stream D Expected result Radio services are in all cases listed in radio lists Test results Conformity L Compliant C Non compliant Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 60 Test Task 9 1 System software upgrade Requirement The receiver shall provide at least one mechanism for upgrading system software HDTV Level receivers shall support and use OTA System Software Update procedure according to the ETSI TS 102 006 The manufacturer shall provide procedure a
72. pad 15 ETSI EN 300 472 v1 3 1 Conveying ITU R System B Teletext in DVB bitstreams 16 ETSI EN 301 775 v1 2 1 Conveying VBI data bitstreams 17 ISO IEC 13818 2 Information technology Generic coding of moving pictures and associated audio information Part 2 Video 18 ITU R BT 653 3 Teletext systems 19 EN 50221 Common Interface Specification for Conditional Access and other Digital Video Broadcasting Decoder Applications 20 IEC 60958 Digital Audio Interface 21 IEC 61937 Digital audio Interface for non linear PCM encoded audio bitstreams applying IEC 60958 21 22 ETS 300 706 Enhanced Teletext Specification 23 ISO IEC 8859 2 Information technology 8 bit single byte coded graphic character sets Part 2 Latin alphabet No 2 24 ETSI TS 102 114 DTS coherent acoustics Core and extensions 25 IEC 62216 1 Digital terrestrial television receivers for the DVB T system Part 1 Baseline receiver specification 26 CEA 770 3 High Definition TV Analogue Component Video Interface 27 EN 300 743 V1 2 1 Subtitling systems 28 EN 50049 1 Domestic and similar electronic equipment interconnection requirement Peritelevision Connector Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 5 29 HDMI HDMI Licensing LLC HDMI High Definition Multimedia Interface rev 1 3A October 10 2006 30 CEA 861
73. pected result The teletext data is presented correctly inside user interface of receiver by using HDMI and SCART interface Test results Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 68 Test Task 10 8 DVB subtitling Requirement The receiver shall be capable of decoding and displaying DVB subtitle services which are transmitted in conformance with ETSI EN 300 743 including characters from code table ISO IEC 8859 2 The HDTV Level receiver shall include default font s with good readability for all output video resolution modes for SDTV and HDTV The HDTV Level receiver should be able to up scale DVB SDTV subtitling and EBU Teletext subtitling for a service with HDTV video with the target to keep the same relative size as the DVB SDTV subtitling and Teletext subtitling has within a SDTV video grid Up scaling should be done with a good readable result at the HDTV output Test Purpose of test procedure To verify that DVB subtitling is implemented and functional Equipment DVB T Modulator Transport stream used Use transport stream C Test procedure Prepare test environment and setup o
74. rence Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 65 Test Task 10 5 CVBS teletext Requirement The SDTV Level receiver shall offer at least one of following options for presentation of Teletext By insertion of the Teletext data in the VBI of the analogue CVBS video output Insertion shall conform to ITU R BT 653 3 and to requirements for level 1 5 defined in ETS 300 706 By presentation of Teletext within the navigator of the receiver Test procedure Purpose of test To verify the presentation of teletext using insertion in the VBI of the analogue CVBS video output Equipment MPEG DVB T UP i Modulator DVB T STB Se ee ee Transport stream used Use transport stream C Test procedure 1 Prepare test environment and setup of instruments 2 Inside user interface select program that includes teletext 3 On external monitor TV connected using SCART or CVBS interface check the presentation of teletext 4 With remote control select teletext page 704 and check correct presentation of Slovene characters Expected result The teletext data are inserted in the VBI of the analogue CVBS vide
75. rvice list was not empty before manual search the services in service list shall be replaced if they are the same or moved to other positions Sorting of programs on CH y can be defined by manufacturer Expected result All test results shall be OK Test results Requirement Conformity Manual channel search can be performed successfully by only entering channel number The channel list is as defined in test procedure Service S1 in only listed once in the channel list Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 29 Test Task 2 3 Tuning and scanning Changes in modulation parameters Requirement The receiver shall receive and react to changes in TPS Test procedure Purpose of test The receiver shall recover from changes in modulation parameters and output an error free TS This should take less than 3 seconds for any change The receiver should be able to detect a change of modulation parameters signalled in the TPS data of the DVB T signal in order to reduce the recovery time Purpose of the test is to check if the receiver adopts to change of DVB T parameters auto
76. s are at least 20dB lower than original signal Equipment ae til l l l l l l l l F UP ork MIP GPS ear source 1 ATT Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Use mode 8k 64 QAM R 2 3 A Tu 1 4 GI value is 224us 3 Use channel 45 and set the receiver input level to 50dBm 4 Disconnect the receiver 5 Set the fading simulator to parameters in tables 6 Connect the receiver 7 The receiver shall tune to transport stream 8 Check the performance using QEF 9 Repeat for different parameters from the table Expected result The receiver is capable of decoding the signal also in environment with echoes outside guard interval Test results Environment 8k 64 QAM R 2 3 A Tu 1 4 Delay us Attenuation dB Conformity 260 230 230 260 Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 17 Test Task 1 5 Transmitting parameters Requirement The receiver shall be capable of operation with all combinations of following transmitting parameters Mode 2k or 8k COFDM Modulation
77. side user interface of receiver Test results Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 67 Test Task 10 7 User interface based teletext for HDTV Level receiver Requirement HDTV Level receiver shall be able to display EBU Teletext both normal teletext pages and teletext subtitling pages using the OSD meeting the requirements for level 1 5 in ETSI EN 300 706 Enhanced Teletext Specification Test procedure Purpose of test To verify if HDTV Level receiver displays EBU Teletext both normal teletext pages and teletext subtitling pages using the OSD meeting the requirements for level 1 5 in ETSI EN 300 706 Enhanced Teletext Specification Equipment MPEG DVB T UP l source Modulator DVB T STB l Lp eee Transport stream used Use transport stream C Test procedure 1 Prepare test environment and setup of instruments Connect Monitor TV using HDMI interface 2 Connect signal including teletext to receiver input 3 By pressing button for teletext on receiver remote control check the teletext presentation 4 Check the presentation of Slovene characters Ex
78. t Task 3 3 Digital Audio Output S PDIF Requirement The receiver shall have a coaxial or optical S PDIF interface for digital audio to provide PCM signal according to IEC 60958 or non linear PCM coded audio stream according to IEC 61937 Test Purpose of test procedure To verify the presence of coaxial or optical S PDIF interface and compliancy with requirements Equipment MPEG 4 DVB T UP source Modulator converter TV Monitor s S PDIF DVB T STB Test procedure 1 Prepare test environment and setup of instruments 2 Transport stream shall include one or more services with video content teletext and multichannel audio 3 Connect signal from S PDIF output of STB to audio amplifier and verify the reproduction of sound 4 In any case the sound shall be present regardless if TV or radio program is selected and if selected service includes multichannel audio or not Transport stream used Use transport stream D Expected result The functionality of S PDIF interface complies to requirement Test results Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 35 Test Task 3 4 HDMI int
79. t The receiver shall be capable of receiving the signal on Gaussian channel in simulated SFN networks with presence of noise in input signal Test Purpose of test procedure To verify the performance of receiver in simulated SFN networks with present noise in input signal The functionality of receiver shall be guaranteed from the signal noise level of at least 18 dB Equipment es IV l l l l l l l l 7 t UP Pola MIP GPS Sas ae ee ew gix ATT Transport stream used Use transport stream B Test procedure 1 Prepare test environment and setup of instruments 2 Use mode 8k 64 QAM R 2 3 A Tu 1 4 GI value is 224 s 3 Set the input signal level to receiver on channel 45 to 50dBm 4 Disconnect the receiver 5 Set fading simulator parameters according to the table Environment 2 6 Connect the receiver 7 The receiver shall tune to transport stream 8 Check the performance using QEF 9 Increase the noise level to a level the receiver is not capable of decoding according to QEF 10 Write the signal noise level at which the receiver stops operating according to QEF to the result field Environment 2 Delay us Attenuation dB 0 11 75 0 107 13 135 25 Expected result The receiver is working also in environments including noise level Test results Level of signal noise ratio allowing QEF reception dB Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can b
80. ter 6 MPEG Demultiplexer maximum transport shall Shall 5 1 stream data rate MPEG Demultiplexer support of variable liad bitrate statistical multiplexing shal Shall ae Chapter 7 MPEG VIDEO Decoder Audio video shall shall synchronization 6 1 Chapter 7 1 MPEG VIDEO Decoder decoding of MPEG 2 shall shall 6 2 SD resolutions MPEG VIDEO Decoder decoding of MPEG 4 Chapter 7 1 SD resolutions shall shall 6 3 Chapter 7 1 MPEG VIDEO Decoder minimum bitrate shall shall 6 4 MPEG VIDEO Decoder decoding of MPEG 4 Chapter 7 2 HD resolutions shall 6 5 HDTV Down conversion of High Definition shall Chapter 7 2 Video for Standard Definition output 6 6 Chapter 8 1 SDTV AUDIO decoder shall shall 7 1 Chapter HDTV AUDIO support for E AC3 on HDMI shall 8 2 2 1 output interface 7 2 Chapter HDTV AUDIO support for E AC3 on S PDIF shall 8 2 2 1 output interface 7 3 Chapter shall 8 2 2 1 HDTV AUDIO E AC3 requirements 7 4 Chapter shall 8 2 2 1 HDTV AUDIO E AC3 metadata support 7 5 Chapter HDTV AUDIO support for HE AAC on HDMI shall 8 2 2 2 output interface 7 6 Chapter HDTV AUDIO support for HE AAC on S PDIF shall 8 2 2 2 output interface 7 7 Chapter shall 8 2 2 2 HDTV AUDIO HE AAC requirements 7 8 Chapter shall 8 2 2 2 HDTV AUDIO HE AAC metadata support 7 9 Chapter 9 Radio mode basic functionality shall shall 8 1 Chapter 9 Radio mode radio channel list shall shall 8 2 For HDTV level ee ae System software upgrade shall sal 9 1 OTA
81. to AC3 or DTS Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES _ NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 56 Test Task 7 8 HDTV AUDIO HE AAC requirements Requirement The receiver shall e be capable of decoding HE AAC Level 2 mono stereo at sampling rates of 48 kHz according to ETSI TS 101 154 Annex H e be capable of decoding HE AAC Level 4 multi channel up to 5 1 at sampling rates of 48 kHz according to ETSI TS 101 154 Annex H downmix e be capable of transcoding HE AAC Level 4 multi channel up to 5 1 at sampling rates of 48 kHz according to ETSI TS 101 154 Annex H to AC3 or DTS If supported transcoding to AC3 audio streams shall be according to ETSI TS 102 366 ata fixed bitrate of 640 kbit s If supported transcoding to DTS audio streams shall be according to TS 102 114 at a fixed bitrate of 1 536 Mbit s Test procedure Purpose of test To verify that the receiver supports HE AAC requirements Equipment Home DVB T STB cinema system MPEG 4 DVB T UP source Modulator converter The TS shall contain services which has e HE AAC Level2 48kHz mono stereo audio component with relevant signalling e
82. tors and other accessories 14 Digital STB receiver standalone or integrated 10700 NIO OT OO NITE Note In this chapter basic equipment for performing the tests is listed Also other types of equipment and instruments can be used depending from principle of performing the tests Inside each test basic configuration for performing the test is presented Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 13 8 Testing tasks Test Task 1 1 Automatic scan through the whole frequency range UHF and VHF Requirement The receiver shall allow reception and demodulation of terrestrial signal transmitted by transmitter according to EN 300 744 The receiver shall be able to automatically scan through the whole frequency range UHF and VHF and tune in to the correct DVB parameters The tuning data shall be stored in a service list in order to allow a quick tune in to the selected transport stream Test procedure Purpose of test To verify reception of DVB T signal and scan through whole frequency range VHF and UHF Equipment Receiver under test monitor TV in case of STB documentation Test procedure 1 Check the receiver documentation and verify the compatibility for reception of DVB T signal 2 Inside user interface check the possibility for automatic scan in VHF and UHF Expected result Receiver is capable of scanning whole frequency bands UHF and VHF Test resu
83. trough Requirement The RF signals should be bypassed from RFin to RFout independently from the status of the receiver Test is optional for iDTv Test procedure Purpose of test 1 To verify that the receiver has a correct output connector for the loop through of the RF signals 2 To test the attenuation gain of the RF loop through for standby and operational modes Equipment Spectrum DVB T STB analyzer or Power meter Signal generator Test procedure 1 Prepare test environment and setup of instruments 2 If the receiver has the possibility of power supply over RF turn this option OFF 3 Connect signal source to RF input of receiver and spectrum analyzer to RF output take care for possible DC voltage on instruments input Set the input level of the receiver to 50dBm Power ON the receiver test in POWER ON MODE Test frequency range from 47 MHz to 869 MHz Measure insertion loss trough complete frequency range The insertion loss can be maximum 6dB 8 Repeat the test while receiver in STANDBY 9 Check if the output connector complies with IEC 60169 2 NOs Expected result RF output connector complies to IEC 60169 2 insertion loss of the loop is inside 6dBm and the forwarding of signal is possible in STANDBY and in POWER ON receiver mode Test results Conformity L Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can
84. ure Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 45 Test Task 6 4 MPEG VIDEO Decoder minimum bitrate Requirement The decoder of receiver shall decode pictures in resolution of 720x576 pixels with minimum data rate of 600 kbit s Test Purpose of test procedure To verify the receiver can decode picture at minimum bitrate of transport stream Equipment MPEG DVB T UP source Modulator converter MPEG 4 DVB T UP source Modulator converter Transport stream used Use transport stream A Test procedure 1 Prepare test environment and connect the components 2 Select program from transport stream with bitrate of 600kbit s including video in resolution 720x576 audio and teletext 3 Check correct decoding of picture Expected result Inside transport stream it is possible to receive all programs Test results Conformity L Compliant L Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 46 Test Task 6 5 MPEG VIDEO Decoder decoding of MPEG 4 HD resolutions Requirement The decoder of the receiver shall fully comply with standard ISO IEC 14496 10 for decoding MPEG 4 and shall support H 264 AVC
85. used accordingly to used audio video coding type The following table lists the possible values Table A Service type possibility Service_type Hex Description 0x01 digital television service see NOTE 1 0x02 digital radio sound service see NOTE 2 Ox0A advanced codec digital radio sound service 0X16 advanced codec SD digital television service 0x19 advanced codec HD digital television service NOTE 1 MPEG 2 SD material should use this type NOTE 2 MPEG 1 Layer II audio material should use this type All television services encoded with MPEG 2 profiles for SD type video uses service_type 1 0x01 H 264 AVC profiles for SD type video uses service_type 22 0x16 H 264 AVC profiles for HD type video uses service type 25 0x19 All radio services encoded with MPEG1 LAYER II uses service_type 2 0x02 AAC ISO IEC 14496 3 uses service_type 10 0x0A For receivers on the Slovenian market after 01 01 2010 the advanced codec service_types descriptors are mandatory Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 12 6 Quality measurement method The quality limit in this specification is defined as Quasi Error Free QEF reception where QEF means less than one uncorrected error event per hour The definition of QEF is provided in EN 300 744 and corresponds to BER of 10 11 in the TS data at input of the MPEG 2 demultiplexer In practice it takes lon
86. value is 224s 3 Signal level on receiver input shall be set to 50dBm 4 Disconnect the receiver 5 Set the fading simulator to parameters in tables 6 Connect the receiver 7 The receiver shall tune to transport stream 8 Check the performance using QEF 9 Repeat for different parameters from the table Expected result Environment 1 Environment 3 Track Delay us Attenuation dB Track Delay us __ Attenuation dB 1 0 0 1 0 3 2 39 5 2 95 0 3 82 11 3 180 15 4 125 16 5 167 15 6 200 20 Environment 2 Track Delay us Attenuation dB 1 0 11 2 75 0 3 107 13 4 135 25 Test results Environment Environment 1 Environment 2 Environment 3 Compliancy Conformity _ Compliant C Non compliant _ Major deviation _ Minor deviation comment Comments Non compliancy can be fixed with software update _ YES L NO Describe more specific faults and or other information Date Signature Test specifications for DVB T receivers used in Republic of Slovenia v1_1 doc Page 16 Test Task 1 4 Performance in Single Frequency Networks echo outside the guard interval Requirement The receiver shall be capable of receiving the signal in simulated SFN networks Test Purpose of test procedure To verify if receiver is capable of receiving the signal in simulated SFN networks according to conditions in this task The echoe
87. vers used in Republic of Slovenia v1_1 doc Page 7 5 Used transport streams In this section of the document the main components of the test transport streams are described Only the important parameters are commented Stream A e PSI SI NIT SDT PAT PMT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name_ Type Comments 1 LIPSYNC TV Lipsync content 2 MIN H264 TV CBR content at 600 kbit s H264 10 AVC TTX bad picture quality due low bitrate 3 MIN MPEG2 TV CBR content at 600 kbit s MPEG2 bad picture quality due low bitrate 4 H264 with TTX H 264 10 AVC TTX Stream B e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 45 666 MHz e Services in the stream Service_id Service_name_ Type Comments 1 S1 TV H 264 10 AVC 720x576 resolution 2 S2 TV H 264 10 AVC 544x576 resolution 3 S3 TV H 264 10 AVC 480x576 resolution 4 S4 TV H 264 10 AVC 352x576 resolution TTX Stream C e PSI SI PAT NIT PMT SDT CAT EIT TDT and TOT e NIT Terrestrial 64 QAM 2 3 Tu 4 CH 36 594 MHz CH 40 626 MHz CH 46 674 MHz e Services in the stream Service_id Service_name Type Comments 1 S1 TV H 264 10 AVC 720x576 resolution 4 S41 TV H 264 10 AVC 480x576 resolution 5 S5 TTX TV H 264 10 AVC TTX without

test specifications for dvb-t receivers used in republic of slovenia

Contents

Download Pdf Manuals

Related Search

Related Contents