Table of the Contents
Contents
1. start capturing handwritings and drawings to your computer For more detail settings please refer to Configuration section oe The driver must be installed before you connect the device Configuration Windows Once you installed Easy Note Taker and run the application program you can see the following icon showing in the system tray d Unit Not Detected Device is not connected to computer Mouse Mode It is the default setting when you have connected the device with computer Initial Settings When you perform the application and plug in the device at the first time you should be asked to complete some initial settings 1 Set Digital Note Mode Select an operation mode to active in default when the device is plugged every time Set Digital Note Mode Set Digital Hote Mode When I start the application use the following mode When I start the application use the Following mode Note mode Note mode Perret iti rte Cancel Cancel 1 Note mode Your writing on a paper will create a note page within the Note Taker application You will see your handwritings on the screen immediately 2 Mouse mode The digital pen acts as a regular PC mouse with functions like moving the cursor left click and right click Normally you can activate and use ink related applications such as Offi2. te taker 3 0 InstallShield Wizar 6 When the installation is completed click 4 89 note taker30 In Installshield Wizard Completed Finish to exit the wizard The Installshield Wizard has successfully installed Easy note taker 3 0 Click Finish to exit the wizard Mac OS Installing the Driver Software on Mac OS 1 Please insert the installation CD into your CD y TETT m lt ROM drive The Note Taker main window will _ MACOSX NateTaker pka appear and then click on NoteTaker pkg to start the Installation wizard 2 When you see Welcome to the Note Taker Introduction Installer Message window click Continue Destination Sele NN You will be guided through the steps necessary to install this software o sc Installati ne y to proceed with installation of Note Taker nawa TTD 4 1 t 4 Preferences po WA 3 Select the volume where you want to install Select the volume where you want to install the NoteTaker Introduction 0 4 software the software and then click Continue pesa N lt aS O Installatiane SY Summa GF Macintosh HD 90 3 GB available 111 GB total NIU NUN TELI hdd A gt Installing this software requires no additional space You have chosen to install this software on the volume Macintosh HD 4 Click Install installation of the software on
3. always centered on the page when printed 4 Paper Holder Set the paper holder Preferences General Opacity Paper holder opacity opacity You can drag the slider to set the desired level of transparency Transparent A gt o 4 Pen Styles Fen Sales You can change the pen stroke color and width The default setting on pen stroke color Is black and width is 1 5 Set Device Orientation Only supported in Windows XP Please refer to Configuration section of chapter 2 6 Set Digital Note Mode gt You can choose either Note Mode or Mouse o be the initial one when you connect the device to a computer Please refer to Configuration section of chapter 2 for details 7 Mouse Properties Set the mouse resolution Edit View Configuration am BM ReadUserManual FI MINA 6 2 About Easy note taker n Miscellaneous 2 Deleted Items 3 7 Received Notes Mobile Notes 2 X r i ia Contacts M sccllanocus Deleted Items E Follow up 1 Read User Manual Mouse Properties Mobile Notes Contacts Click to open the user manual or you can click on Start Programs Easy Note Taker gt User Manual to open it ou have to install Adobe 2 About Easy Note Taker lt shows information of Application Driver Firmware versions and Product ID 1 72 0 0 7 14 123 22 1 10 3 0 1 1 4
4. 1 Check the device connection After you connect the device to your computer the indicator of the receiver unit should be on instantly If it is not on please follow these steps 1 Make sure the USB cable is properly connected to a USB port on the computer 2 Try connecting to another USB port 3 If the device is connected to a USB Hub please make sure the USB Hub is properly connected to a USB port on the computer 4 Check if your USB controller is activated or not 2 Diagnose the device If the digital pen or the receiver unit still does not work properly please follow these steps to help diagnose the problem with the device 1 Unplug the USB cable from computer 2 Remove the driver program from the operating system 3 Re connect the device to a computer with USB connection a Check whether the indicator is on or not If It is still off that means there is an error with your receiver unit 4 Download the latest version of the driver directly from our official website You can also check the latest FAQ on our web site for other information 5 Install the latest version of the driver and restart your computer when the installation is completed 6 After you restart the computer run the application program and then connect the device a If you cannot launch the application program it means the driver failed during start up This might be caused by an incompatibility Issue b Test your digi
5. CD DVD ROM then start the Autorun program 2 Please select Driver Setup and a language to start the installation wizard si a sy note taker 3 0 InstallShield Wizarc 3 The wizard will install Easy Note Taker 1 Easynote taker 2 0 insta Welcome to the InstallShield Wizard for Easy note taker 3 0 application into your computer Click Next The InstallShield R Wizard will install Easy note taker 3 0 on your computer To continue click Next to install the software WARNING This program is protected by copyright law and international treaties b GE asy note taker 3 0 stallShield Wizarc 4 You will see the information about the ni teke 30 instal Destination Folder Click Next to install to this folder or click Change to install to a different folder destination folder Click Next to install to Install Easy note taker 3 0 to C Program Files Kanvus KuPen the default destination folder or click Change to install it in a different folder InstallShield n 43 P f Le 29 note aber 20 astaliShield Wizare 5 Click Install to begin the installation PASAS Ready to Install the Program The wizard is ready to begin installation Click Install to begin the installation If you want to review or change any of your installation settings dick Back Click Cancel to exit the wizard I InstallShield
6. a new name Performs a final irretrievable deletion of all deleted notes in the Deleted ltems folder Enter a new name Please be noted that once you do it all the deleted items will not be retrieved 13 Print 14 Print Preview at Prints the note notes you selected i Shows the selected note as it will look when it inted 15 Print Setup Set the print options such as size and source of the paper and the print orientation 16 Backup Restore 1 Backup Database Backup your Note Browse For Folder Select a folder to backup database into Manager database RI Desktop gt a HW H gt dv Public gt fi Computer gt Da Network 2 Restore Database Restore your Browse For Folder Select a folder containing the database to be restored database from the folder which contains the RI Desktop backup file gt El Hw H gt dv Public gt pill Computer gt E Network de Backup 17 Exit Exit the Note Manager software interface Ctrl X i a Es Copy Ctrl l gf MB Paste Ctrl V gt W Delete Del Rename Fl Find Note Ctrl F Find Next FS Select All Ctrl A 1 Edit Note Edit a note that you select An extra Edit Note window will appear once you click on this function You will be performing your editing work on this window Please refer to Edit Note section for more details 2 Cut 3 Copy Cuts the selected n
7. coverage on the paper Once you have completed one page shortly press the front control button to save current page and start a new page You can see the page number added by one on the unit screen When you are using KuPen Air to capture your handwriting in Mobile Mode please always press the Front Panel Button after Jr writing will be on the new page while avoiding overlapping d fal Place the Receiver Unit The following images illustrate the ways you can place your receiver unit according to the recommended positioning Place your receiver unit at the top center of the paper for stronger sensor coverage writing habits Coverage Area Coverage area is the area that the receiver unit can sense the movement of the digital pen The sensor coverage is about an area of an A4 size paper and depends on the orientation you have set The coverage area includes operation scope on the computer screen The operation scope remains the same no matter the size and the resolution of different computer screens Holding the Digital Pen Hold the digital pen as you would hold a pencil When you are writing with the digital pen make sure its inclination to the paper surface is between 45 and 90 For better writing quality Hold the pen firmly and write normally Do not block the recei
8. digital Pen Resumes previously undone strokes Changes the pen color and width Copies the note into the clipboard for pasting onto other applications Prints the current note Sends the current note via local network to selected recipients Sends the current note by email to selected recipients as a JPEG attachment Exports the current note to a JPEG file Saves the note to a specified folder and closes the note window Convert your note to text file by using MyScript Notes Saves the current note into the Notes Manager under the default Miscellaneous folder and closes the Note Taker Closes the current note without saving Edit Note Once you select a note file for editing the Edit Note window will appear You can select an area or an object to edit on the note you can delete it change the color and or width of the pen strokes etc There are some useful tools and functions that help you edit your notes easily such as the drawing features inserting circle line highlight text etc You may also edit these drawing elements after you insert them Note Edit View Configuration Tools Help ine OG Pill gt pO For Help Press Fl Zoom 100 Edit Note windc Toolbar Standard Toolbar Standard 5 ina OB Print Cuts Copy Paste 4 About Toggle Full Screen View Note Color Tools Toolbar Prints the selected note Cut
9. pane 3 Medium Thumbnails Display notes as medium sized thumbnails in the Note Manager viewing pane 4 Large Thumbnails Display notes as large thumbnails in the Note Manager viewing pane You can change the thumbnail s size with the shortcut buttons in the toolbar directly 5 Zoom In Enlarge the thumbnail view by 50 6 Zoom To Fit Return the thumbnail view size to its original size 7 Zoom Out Shrink the thumbnail view by 50 The Zoom function is available only when viewing an individual note file You can also use the shortcut buttons at the lower left corner of the window to control it easily DE EST Note Manager Configuration File Edit View Help a My Notes 6 OD Miscellanec Deleted Ite E Received Ne a 3 Mobile Not Detect Hardware Y JE i La Py R Set Device Clock Delctod Items Roccvod Notes Mobile Notes Contacts Preferences Pen Styles Set Device Orientation Set Digital Note Mode B O 2009 8 7 D Page DB Page 2 E Page3 E Contacts E Follow up Mouse Properties 1 Detect Hardware Detect your device You can also see if the device has been detected or not from the system tray ICON 2 Set Device Clock This operation will set your device clock to the Windows system time It is in order to meet the timing when you upload notes from the receiver unit 3 Preferences 1 General Configure
10. preferences for the general settings a In the Auto Save note in box select Preferences the time interval in minutes after which the system automatically saves Auto Save note in your note This also activates an Load when Windows starts Save sticky notes on exit auto recovery feature that recovers any unsaved information in case of system crash or power failure The only input lost is changes made since the last auto save You must tick the Load when Windows starts check box first to enable the Auto Save function b Tick the Load when Windows starts checkbox to automatically load the Easy Note Taker each time you turn on your computer c Tick the Save sticky notes on exit checkbox to automatically save all the new sticky notes you created The saved sticky notes will then instantly appear the next time you turn on your computer or restart the appli 2 Mobile You can set rule for the receiver nd Mobile unit to upload new notes automatically or When connecting a Mobile unit Upload new notes automatically not when it is connected to a computer Yes No Ask me 3 Printing The settings for page printing a Tick the Note per page checkbox to specify that when you print notes only VIA i Y Center note on page one note is printed on one page b Tick the Center note on page checkbox to specify that notes are
11. regardless of the basis on which you are entitled to claim damages from Kanvus Kanvus is liable for no more than damages for bodily injury including death damage to real property and tangible personal property or any other actual and direct damages resulted from omission or failure in performing legal duties under this warranty statement up to the listed contract price of each product Kanvus will only be responsible for or indemnify you for loss damages or claims based on contract tort or infringement under this Warranty Statement This limit also applies to Kanvus suppliers and its distributors It is the maximum for which Kanvus its suppliers and its distributors are collectively responsible UNDER NO CIRCUMSTANCES IS KANVUS LIABLE FOR ANY OF THE FOLLOWING 1 THIRD PARTY CLAIMS AGAINST YOU FOR DAMAGES 2 LOSS OF OR DAMAGE TO YOUR RECORDS OR DATA OR 3 SPECIAL INCIDENTAL OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES INCLUDING LOSS OF PROFITS OR SAVINGS EVEN IF KANVUS ITS SUPPLIERS OR DISTRIBUTORS ARE INFORMED OF THEIR POSSIBILITY
12. without saving any changes The note is uploaded automatically when you connect the device via a USB port on your Mac computer 4 After you connect the device and upload the me notes to you computer a folder will appear osos Ae Applications automatically showing the preference you Ei Documents E SEARCH FOR set last step Then you can see saved notes as TIFF format Double click on the desired file to view it 3 Using the Device Usage Overview Place the Receiver Unit Usage Overview The Kanvus KuPen Air enables you to work in two modes Link Mode and Mobile Mode Link Mode When you link the Kanvus KuPen Air to a computer you are working on the operation mode which is referred as the Link Mode This operation mode allows you to upload your handwriting or drawing to a computer and view them on a screen For further details please refer to Using the Bundled Software When you work in Link Mode your writing or drawing on the paper will be instantly captured and displayed on the computer screen You can do some further editing for the writing and drawing with the bundled software The digital pen also acts as a mouse with features like Hovering Left Click Double click and Right Click e You can move the mouse cursor with the digital pen by pressing the button on the pen or tap the pen tip on the paper once Then the pen can be used for hovering for abou
13. 9 0 1 0 13 0 1 0 6 0 1 0 7 0 3 0 5 0 Note Taker Tap your pen tip once on a paper to launch Note Taker when you run the Easy Note Taker application program in Note Mode Your handwritings on the paper will be capture instantly and displayed on the screen You can do some further editing for the handwritings Switching Modes You have three choices for switching modes between Mouse Mode and Note Mode 1 From System Tray Icon Right click on the icon and switch between modes Browse Notes Browse Notes ks Mouse Mode ka Note Mode Detect Hardware Detect Hardware My Sticky Notes My Sticky Notes Upload My Mobile Notes Upload My Mobile Notes p About Easy note taker P About Easy note taker Exit Exit 2 From Note Manager Toolbar Click on the shortcut button directly 5 ho Bae Change your Digital Pen to Mouse Mode Miscellaneous n E 1 Y FT La 3 From Virtual Area Tap the digital pen at the virtual area as the following figure shows You can see if the mode switched by the icon in the system tray A a Ok Sib Fe VISO Edit Clear Undo Redo Pen Styles Copy Print Send by network Send by email Export to JPEG Save to folder Convert to text Save and close Close without saving lano Opens the Edit Note for editing the note Clears the entire notes on the screen Clears the previous stroke made by the
14. Items 3 Received Notes Mobile Notes 1 E 2009 8 13 18 04 44 3 DB Pagel B Page 2 E Page3 Ea Contacts 25 Follow up Maiscellanoous Deleted Items Roccivod Notes 2 Note Mode Mouse Mode Mobile Notes Contacts Follow up Click this option to switch the operation mode between Note Mode and Mouse Mode Then you will see the corresponding icon in the system tray e Note Mode re Mouse Mode 3 Detect Hardware Detect your device If your device is not detected the icon in the system tray will change to d 4 My Sticky Notes If you have set a note to show as a sticky note and Br Mute Note Mode Detect Hardware My Sticky Notes Upload My Mobile Notes hide it then you can view it with this option P About Easy note taker Exit Convert To Text Print Hide Close 5 Upload My Mobile Notes Upload your handwritings to the default folder from receiver unit The icon in the system tray shows KI when it is during uploading About Easy note taker 6 About Easy Note Taker Displays information of Application Driver Firmware Version versions and Product ID on a dialog box Connection Product ID USB 40 Firmware PegPad dll PegUSB dll PegRoute exe PegRoute dll PegDI dill PegMouse dll CDA 1 72 0 0 7 14 123 22 1 10 3 0 1 1 49 0 1 0 13 0 1 0 6 0 1 0 7 0 3 0 5 0 http Avww kanvus gl
15. Kanis UY Y VETE Life Kul en LP Capture your Idea Jsers Manual Windows amp Macintosh fra aloni ASI a shoe Life Table of the Contents About This User s Manual 2 Introducing the Easy Note Taker 31 Notes for This Manual eressavvrrannvrrannnvenne 2 Note Manager aan 32 Folders ea 32 Safety Information s s ssx1 3 y Toolbar mH 33 Care and Cleaning 1 1 3 Menu OA 34 Note Taker ewan anae 49 1 Product Introduction 4 Ao Switching Modes 50 Product Features o AN 5 Toolbar ee 51 Package Content oaan naa anah 6 Edit NOIE a 52 Receiver Unit 7 Toolbar AA 53 Digital Pen o oo 8 Menti AS gt 2 Getting Startedi asrensasnonsavnnnsasnnnnnnnennn 10 9 Specificati omfSHMmary r nmrirssern 63 Installation If 11 Receiver Unito urina 64 Windows i 11 Digital Pen e2 _ y66 65 Mac OS 13 6 Troubleshooting rrrrnr 66 Connecting the Device 15 Testing your device 67 GonfigdfationZ nc eaaa awana 16 J PAG OR AMA 69 WINAOWS aaa eaaa aee 16 Vl O A A 20 Service and Technical Support 4 3 Using the Device 22 MIA
16. Note Manager enables you to store organize view copy paste and export your notes It is set up in Windows Explorer format which allows you to navigate and organize your file folders at the left pane while viewing the note files at the right pane 4 Note Manager File Edit View Configuration Help E Miscellaneous 3 Deleted Items a 5 Received Notes 9 Mobile Notes 1 E 2009 8 13 18 04 44 3 E Paget D Page 2 D Page3 Ea Contacts E3 Follow up Folders You can see the default folders included under ti store the notes in different categories M isccllanoous Delctod Items Roccived Notes Note Manager window rotte Pesenan W Felowup These two folders allow users to store customized types of notes Upload Uploads your notes from the receiver unit to your computer Convert to text Converts your note to text file by using MyScript Notes Cut Cuts the selected note or folder and save into the clipboard Copy Copies the selected note or folder and save into the clipboard Pasto Pastes the note or folder from the clipboard which was copied or cut previously Delete Deletes the selected note or folder Edit Note Allows you to edit a selected note Print Prints the selected note notes Show as Makes your note as a sticky note sticky note Show as Makes your note as a paper holder paper holder Small Displays note files in small thumbnails on the Note Manager Thumbn
17. OI O Ue Usage Ovora 03 A AAA A aa AA NGANA 73 Place the Receiver Unit 25 Declarations and Safety Statements 74 rer SA 74 Coverage Area 26 9 CRRA _ L l 74 Holding the Digital Pen 27 Ordering Components and LCD MACO ME 28 Accessories ii 75 4 Using the Bundled Software 29 Copyright Information 76 Minimum System Requirements 30 Limitation of Liability 77 About This User s Manual You are reading the Kanvus KuPen Air User s Manual This Manual provides information regarding the components of the Kanvus KuPen Air and how to use them properly The following are major sections of this User s Manual Product Introduction Introduce the components of Kanvus KuPen Air Getting Started A learning chapter guides you in getting started with the Kanvus KuPen Air Using the Device Offers a brief instruction on using the Kanvus KuPen Air Using the Bundled Software A walkthrough on using the utility of Kanvus KuPen Air Specification Summary Provides you specifications summary of Kanvus KuPen Air Troubleshooting Trouble shooting and FAQ for Kanvus KuPen Air where you can find the answers to most common problems Notes for This Manual A few notes and manuals are used throughout this guide allowing you to complete certain tasks safely and effectively h
18. ails window EE Medium FAR Thumbnails El Large r Thumbnails eee Note Mode Ea Mouse Mode 7 About Displays note files in medium sized thumbnails on the Manager window Displays note files in large thumbnails on the Note Manager window Click on this icon to switch to Note Mode Click on this icon to switch to Mouse Mode Displays your Easy Note Taker version information Upload Convert To Text Move To Send To Import Export Set Reminder Show As Sticky Note ZA Show As Paper Holder Properties New Folder Empty Deleted Items Es Print Ctrl P Print Preview Print Setup BackupyRestore Exit 1 Upload Upload notes from the receiver unit to the computer i 2 Convert To Text Convert your note to text file by using MyScript Notes software You must install MyScript Notes software first in order to enable this function 3 Move To Move to Folder Move the note file you selected to another Note Contacts Follow up Manager folder Mobile Notes Received Notes 4 Send To 1 Network PC Sends the selected note to a Send Note Send note to local network computer which has installed Address Easy Note Taker application program Then RD USERS 192 158 7 15 you can see the name and address of that local network PC on the list 3 Send by email as a data file Send the note file you selected as an original data fil
19. by clicking and dragging with your mouse 2 Pen 3 Highlight Write draw anything on the note file with your Make your handwriting drawing in highlighter mouse pen stroke with your mouse 4 Line _ 5 Circle Inserts a line of any length nserts a circle image of any size Pam AN A a i 6 Rectangle Inserts a rectangle of any size Inserts typewritten text You can also select font and font size 8 Color Select or changes the color of pen strokes highlight strokes or text 9 Line Width 1 2 4 8 selects or changes the thickness of any stroke to width 1 2 4 8 Read User Manual Check for Software Updates About Easy note taker 1 Read User Manual Click to open the user manual or you can click on Start gt Programs gt Easy Note Taker gt User Manual to open it The User Manual is in PDF files You have to install Adobe P Acrobat Reader first in order to open PDF files 2 Check for Software Updates ar N 3 About Easy Note Taker It shows information of Application Driver F a sions and Product ID 4 Specification Summary Receiver Unit 64 Digital Pen FEST vico OO pereng noe de Scemo 6 Troubleshooting Testing your devic i FA NO gt gt JE 4 and Tech nical Su pport Testing your device Please do the following tests first to identify your problem
20. ce 2007 Microsoft Journal Windows Vista Ink applications in this mode 2 Base Unit Orientation Only supported in Windows XP Set and place your receiver unit orientation the same way as your actual writing habit Base Unit Orientation Using your base unit with a Paper Block O If you are Right Handed we highly recommend placing your base unit at the upper left corner of your paper block as shown in the sample image O If you are Left Handed we highly recommend placing your base unit at the upper right corner of your paper block as shown in the sample image Using your base unit with a Single paper If you are using single paper s we highly recommend placing your base unit at the top center of your paper as shown in the sample image 2 The setting of your receiver unit orientation is the same no matter you work in Link Mode or Mobile Mode Property Menu Move the cursor to the icon of Easy Note Taker in the system Browse Notes tray and right click Then you will see the property menu Note Mode Detect Hardware My Sticky Notes e Upload My Mobile Notes R About Easy note taker Exit 1 Browse Notes Click on this option will launch Note Manager that enables you to view the writings you captured to the computer You may also double click on the icon in the system tray to open it directly File Edit View Configuration Help b EEE lt lt Y B Miscellaneous 3 Deleted
21. e pegvf through your default mailbox in your computer system such as Microsoft Outlook 0 The recipients must have installed Easy Note Taker application program in order to open the delivered note file 5 Import You can import any pegvf data format file into the Note Manager database 6 Export 1 Export as a data file Exports the selected note as an original data file in Note Manager s default format pegvf 2 JPEG Exports your note as a JPEG file jpg You can also set the resolution of exported JPEG file to High Fine or Coarse 7 Set Reminder __ Properties for 2009 8 18 PM 04 08 09 Set an exact date and time to make a note file TOPeTtes for 2009 8 18 PM 0 as a reminder and the selected note will be mes FEE ERNE eee P annan displayed Remind on Tuesday August 18 2009 w At 16 14 La BA When the reminder pops up you can print the reminder or set it Snooze to snooze 5 10 inis Close 15 or 20 minutes 8 Show As Sticky Note 9 Show As Paper Holder Make the selected note as a sticky note Make the selected note as a paper holder 10 Properties View the note properties information about Note Name Created Date and Storage Note Name 2009 8 18 PM 04 08 09 Location Created 2009 8 18 PM 04 08 09 Location Received Notes 11 New Folder 12 Empty Deleted Items Create a new folder and enter
22. e Easy Note Taker Once you completed the driver setup the Easy Note Taker application program will be installed in your computer as well The Easy Note Taker comes with operation windows including Note Manager Note Taker and Edit Note for you to view manage organize and edit your notes Activating the Easy Note Taker 1 Doubleclickon the Easy Note Taker shortcut icon on your desktop 2 Start the program by clicking on Start gt Programs gt Easy Note Taker Accessories mn Easy note taker af Easy note taker 3 Uninstall Easy note taker Software Version 3 0 Extras and Upgrades Games 7 User Manual Maintenance 4 Microsoft Office gt Startup 4 Vision Objects 4 BS Adobe Reader8 amp Internet Explorer Internet Explorer 64 bit Windows Calendar Windows Contacts Fife Windows Defender Windows DVD Maker Windows Live Messenger Download Windows Mail Default Programs Windows Media Center Windows Media Player Windows Update Windows Meeting Space mio G 9 al amp 6 Windows Movie Maker ds Windows Photo Gallery Programs Documents b dg Et 58 the PG es Settings i Wan we gt Search gt 25 DB gt 2 Help and Support VI z O dj Run no 3 Shut Down a Vag 31 Note Manager The Note Manager window will appear when you activate the Easy Note Taker application program The
23. f the driver has not been installed please run the Easy Note Taker application provided within the installation CD 2 Check the digital pen to see if it moves the cursor on the screen lf you have replaced a refill before please also check the refill that you changed is in the same standard as the original standard 3 Make sure the distance between the digital pen and receiver unit is within an area of A4 paper 4 If the problem still remains there might be some problems with the connection Please try to re plug the receiver unit and check the pen s battery Question Why is the pen stroke unreadable or discontinued during writing Answer Please refer to the following steps 1 Try to write with more pressure on your pen Or refer to Holding the Digital Pen section of chapter 3 for instruction on correct ways to hold the pen 2 Make sure the writing surface is smooth and flat 3 Remove the barriers between the digital pen and the receiver unit to avoid signal block 4 The battery power of the digital pen is too low please replace the battery Question How can I get the updated software Answer You can download the new driver from our website 1 Uninstall your old driver 2 Download the latest version of the driver in the download section and save it onto your hard drive 3 Unzip the file in a folder and save in your hard drive 4 Double click the Setup exe in the folder where yo
24. gt A WARNING Important Information that must be followed for safe operation Vital information that must be followed to prevent damage to data IMPORTANT components or persons TIP Tips for completing tasks 2 NOTE Information for special situations ASI a shoe Life Safety Information Adhering to the following safety information will prolong the life of the device 1 DO NOT try to open the housing of the receiver unit and the digital pen It will void your warranty 2 DO NOT expose to or use near liquids rain or moisture 3 DO NOT place or drop objects on top of the receiver unit It might affect the receiver sensitivity 4 DO NOT expose to strong magnetic or electrical fields 5 DO NOT throw the receiver unit and digital pen in municipal waste The product has been designed for proper reuse and recycling of parts The symbol of the crossed out wheeled bin indicates that the product should not be placed in municipal waste Check your local regulations for disposal of electronic products 6 Do not connect more than one set of this device at the same time That may cause Interference with each other Care and Cleaning 1 DO NOT expose to dirty or dusty environments to avoid wearing down the surface of the receiver unit 2 DO NOT use any kind of volatile liquid on the surface as it will damage the plastic case 3 Store your receiver unit and digital pen in a clean dry place and avoid extreme temperat
25. linked to a computer end of the cap to change the refill Cover the pen tip 4 with the Pen Cap to protect the pen tip Changing the battery N 1 Twist the battery lid and remove it 2 Put in two SR41 batteries one at a time with the positive poles facing up 3 Cover the battery lid back by twisting it Replacing the refill 1 Pull off the cap of the digital pen 2 Insert the ink refill in the middle of the extractor Hold the pen firmly and apply some pressure against it You must hold the pen tightly in order to do so 3 Pullthe used refill out 4 Slide in the new refill via the tip of the pen 5 Gently push the new refill until It is fixed in place securely Make sure the refill that you changed is in the same standard as the original standard Standard refill 67 2mm long X 2 33mm diameter Z Getting Started i Installation Configura Installation Windows Installing the Driver Software on Windows 1 Once you insert the installation CD into your CD ROM drive the main installation window will appear immediately SS II _ n French Adobe Reader 8 sa Spanish er Italian Electronic User Manual a Portuguese Dutch Recommended Software Links Free Trial German Chinese Russian If the main installation window does not appear automatically please run the installation manually by clicking on My Computer gt
26. ng enabled formats DOC TXT Package Contents Check your package for the following items e Kanvus KuPen Air Digital Pen e USB Cable e Ink Refills amp Stylus amp Batteries eo Kanvus KuPen Air Receiver Unit eo Kanvus KuPen Air Installation CD e Quick Start Guide o e MyScript Notes Lite CD Receiver Unit Refer to the picture below Kanvus A Splas Descriptions O USB Port Connects to a USB port on your computer via the USB cable provided in this product package when you need to upload your writing to your computer 2 LCD Screen The LCD Display on the receive unit indicates the main status of operation Please refer to LCD Indicator section of chapter 3 for more details 3 Front Panel Button Press and hold it for about 5 seconds to turn on off the Receiver Unit or press it gently to create a new saved page when you work away from a computer 4 Reset Button Reset the unit To reset the unit stab into the hole with a tip The Receiver Unit will power off automatically after 60 minutes of idle time when it is in standby Digital Pen Refer to the pictures below 000000 Descriptions 1 Pen Tip Tapping the Pen Tip quickly acts as the Left Click of the mouse tapping it slightly longer to function as the Right Click of the mouse 2 Button Functions as the Left Click of the mouse in mouse mode when it is
27. o LTD Kanvus PROVIDES THIS MANUAL AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITION OF MERCHANTABILITY FOR A PARTICULAR PURPOSE IN NO EVENT SHALL KANVUS ITS DIRECTORS OFFICERS EMPLOYEES OR AGENTS BE LIABLE FOR ANY direct or indirect INCIDENTAL OR CONSEQUENTIAL DAMAGES INCLUDING DAMAGES FOR LOSS OF PROFIT LOSS OF BUSINESS LOSS OF DATA INTERRUPTION OF BUSINESS AND THE LIKE EVEN IF KANVUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies and are used only for identification or explanation and to the owners benefit without intent to infringe SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE PROVIDED FOR INFORMATION ONLY AND ARE SUBJECT TO CHANGE WITHOUT NOTICE AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY KANVUS KANVUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT Copyright 2009 Kworld Computer Co Ltd All Rights Reserved ASI a shoe Life Limitation of Liability N Circumstances may arise where because of a default on Kanvus part or other liability you are entitled to recover damages from Kanvus In each such instance
28. obal com Copyright amp 2009 Kanvus Mac OS Once you installed Note Taker Preferences into your Mac computer it is high suggested that you complete the personal preference settings before you plug in the device 1 Click Go gt Application Finder File Edit View Me Window Help Back 36 Forward 96 Enclosing Folder 36 1 Computer DEC 5 Home 38H Desktop 3D Network HK E iDisk gt Applications LA Utilities HU Recent Folders te Go to Folder 2386 Connect to Server K r 2 Click Note Taker Preferences to run the program 2800 2 Applications O le DEVICES gt li b SHARED Lal 4 er Y PLACES EX Desktop Adobe Stock Photos C33 Adobe Help Viewer 1 1 Adobe Bridge C53 Applications Ei Documents s k SEARCH FOR Corel Painter 11 FirmwareUpdaterlUl iPhoto 3 You will see the Note Taker Preferences setting dialog box e OO NoteTaker Preferences Users gt Shared 1 Target path Displays the destination location in your Mac s hard drive where you would like to store the notes Click to choose a different path 2 Clear device s memory If you tick on this checkbox the memory of the device will be erased after you upload the notes to the computer If the checkbox is unchecked the notes will be kept in your device 3 Save Save your preferences and close the dialog 4 Exit Close the dialog box
29. ote or folder and save into Copies the selected note or folder and save the clipboard into the clipboard 4 Paste 5 Delete Paste the note or folder from the clipboard Delete the selected note or folder which was copied or cut previously You can also use these functions Cut Copy Paste Delete and Edit Note in the toolbar 6 Rename Rename Note Enter a new name Rename the selected note or folder 2009 8 18 PM 7 Find Note You can search notes through the database on two criteria 1 By description Enter a keyword or 2 AII notes created Search notes by keywords to search the note you want It creation date parameters you have to will match with all file names of notes specify the date range included in database Find Note Look in folder 9 By description Search for All notes created Between 119 0 8 19 2009 During the last During the last 3 8 Find Next Skip from current note and find the next note which matches the search criteria 9 Select All Select all notes or folders in a specific folder k g BE lt o SE Small Thumbnails i BE Medium Thumbnails Dele El Large Thumbnails Rece a ES Mok Zoom In Ctrl E Cont Zoom To Fit Ctrl Deleted Items Rocavod Notes Mobile Notes Contacts Fellow up 2 Small Thumbnails Display notes as small thumbnails in the Note Manager viewing
30. s the selected note and saves it into the clipboard Copies the selected note and saves it into the clipboard Pastes the last item from the clipboard which was copied or cut previously Displays you with your Note Taker version information Brings the Edit Note into full screen view Changes the background color for the note to be edited in beige blue green cyan white Select Area e Pen pr Highlight f Line Use it to select any area by clicking and dragging with your mouse Write draw anything on the note file with your mouse Make your handwriting drawing in highlighter pen stroke with your mouse Inserts a line of any length al CO 5 Sx Circle Rectangle Text Change Pen Highlight Color Width 1 Width 2 Width 4 Width 8 Manager Toolbar Sw RT 5 amp Manager P NQ Cd Clear Entire Note Undo Redo Zoom In Zoom to Fit Zoom Out Right Rotate Left Rotate ASI a shoe Life Inserts a circle image of any size Inserts a rectangle of any size Inserts typewritten text You can also select font and font size Selects or changes the color of pen strokes highlight strokes or text Selects or changes the thickness of any stroke to width 1 Selects or changes the thickness of any stroke to width 2 Selects or changes the thickness of any stroke to width 4 Selects or changes the thickness of any stroke to width 8 PE v
31. ss Clears the entire notes on the screen Clears the previous action done Resumes previously undone action Enlarges the note viewing size Returns the note viewing size to its original size Reduces the note viewing size Rotates the entire note image 90 to the right Rotates the entire note image 90 to the left Edit Note Note Edit Configuration Tools Help Print Print Preview Print Setup Exit el Save Send Exit Without Save Send Zoom 61 1 Print 2 Print Preview Prints the current edited note Displays the current edited note as it will look when it is printed 3 Print Setup Set the print options such as size and source of the paper and the print orientation 4 Exit amp Save Send 5 Exit Without Save Send Saves the edited note and closes the Edi Closes the Edit Note window without saving Note window Edit Note Edit View Configuration Tools Help Undo Ctrl Z Redo Ctrl Y Cut Ctrl X Copy Ctirl C Paste Ctrl V Delete Del Clear Note Ctrl Del Select All Ctrl A Properties Ctrl T Zoom 67 1 Undo 2 Redo Clears the previous action Resumes previously undone action 3 Cut 4 Copy Cuts the selected items and saves into the Copies the selected item and saves it into the clipboard clipboard 5 Paste 6 Delete Pastes the last item from the clipboard which Deletes the selected item ii was copied or c
32. t 60 seconds To Click an object point your mouse cursor on that object and tap the digital pen on the paper or press the button on your pen e To Double Click an object point your mouse cursor on that object and tap the digital pen twice on the paper or press the button on your pen twice To Right Click an object point your mouse cursor on that object and press the tip of the digital pen a bit longer on the paper A special Right Click cursor will appear Lift the pen from paper and the context menu Right Click menu will appear 2 Before you connect the device to a computer make sure to install the Easy Note Taker application first Mobile Mode Wh ki ith the K KuPen Ai pm en you are working with the Kanvus KuPen Air away canvia gt from a computer it is called Mobile Mode Under this slak of tive y 4 4 we had uns mode you can capture and store your notes that were taken w el in a meeting conferences or lectures while being away from a computer Your notes writings will be stored in the internal memory of the receiver unit and you can upload them to a computer for viewing editing or email e Press and hold the front control button to power on the receiver unit Place the receiver unit at the top center of a paper and make it firmly e Pick up the digital pen and start writing The receiver unit will be started to capture your handwritings after you tipped the digital pen in the
33. tal pen in the coverage area of receiver unit If it can work as a mouse it means the hardware is fine If it does not work try replacing the batteries for the digital pen c After changing the pen s batteries if it is still not working this means there is an error with the digital pen b If you are a Windows user go to My Computer gt Properties gt Hardware b Device Manager if there is an exclamation mark it means the installed device driver is incompatible with the windows system lf you have this problem please contact us immediately for help Question Why is there nothing on the LCD display when I power on the receiver unit Answer This means that the built in battery power is too low Please recharge the battery by connecting the device to a USB port of the computer directly or use a USB charger to charge it Question Why doesn t the battery icon blink during charging Answer If you have already confirmed that battery power was not full yet then it may mean that the USB port has a bad connection and the power supply is not stable 1 Please refer to LCD Indicator section of chapter 3 for details regarding icons about status 2 Re plug the device again If the problem remain try changing to another USB port 3 Replace the USB charger or USB cable with a new one Question Why can t I see the pen stroke on the screen Answer Please check with the following steps 1 I
34. the volume you selected If you want to install in a AT LLI LIA TIL different destination please click on Change Install Location to go back to the previous step Remember that Mac computers require a set of and username password during installation or un installation Enter your password and click OK to begin the installation displayed click Close to exit the wizard to perform a standard When the message Install Succeeded is MYTE ULL 4 EE ude VEE 9 Introduction Destination Select Installation Y o installation gt 7 Click Install to perform a standard installation of this software on the volume Macintosh HD SummafY Change Install Location WA Installer requires that you type your password Name Kanvus password ror bk Details Cox 9 Introduction Destination Select Installation y O Installation Summary Install Succeeded The software was successfully installed A Connecting the Device Installing the Device on computer 1 After you have properly completed the driver and software installation link the receiver unit to a computer via USB interface with the USB cable provided 2 Place your receiver unit on top of a paper and the sensor TN coverage is about an area of an A4 size paper Then you can E
35. tions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation You can determine whether the equipment is causing interference by disconnecting it from your computer If the interference stops it was probably caused by the equipment If the equipment does cause interference to radio or television you may be able to correct the interference by using one or more of the following measures 1 Rotate the television or radio antenna until the interference stops 2 Move the equipment farther away form the television or radio 3 Plug the equipment and computer into an outlet that is on a different circuit form the television or radio If necessary consult with your dealer or an experienced radio television technician for help CE The Kanvus products have been tested and found to comply with the following harmonized European Norms 1 EN55024 electromagnetic immunity 2 EN55022 electromagnetic emissions Ordering Components and Accessories To purchase parts and accessories please contact your local dealer or distributor ASI a shoe Life Copyright information N No part of this manual including the products and software contained in it may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means without the legal written permission of Kworld Computer C
36. u unzipped the file to complete the installation Service and Technical Support If your device does not work properly please check the Troubleshooting procedure and FAQ first You can go to our web site to download the latest driver software and check the updated FAQ If your problem still remains unsolved please contact our service and technical support staff service kanvus global com KWorld Computer Co Ltd Tel 886 2 8228 6066 6 F No 113 Jian 2 Road Jhonghe City Taipei County 235 Taiwan R O C http www kanvus global com Driver Download You can download the latest driver and e documents from the following web sites http www kanvus global com A P Pe nd i Declarations and Declarations and Safety Statements i FCC This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device according to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruc
37. ures 1 Product Introduction A Product Features N Thanks for purchasing Kanvus product With this Kanvus KuPen Air you can capture any handwritten notes or drawings on a plain piece of paper and store them in its internal flash memory Captured notes can be uploaded to a computer via its USB interface This is an ideal and convenient pen tool when you are away from computer while being in a need to capture any thought or important point Capture handwritings and drawings and transfer them to a computer even when you are away from a computer e When you connect this product to a computer it works not only as a PC compatible tablet to directly insert writings into Windows Vista and Office 2007 systems but also with functions as a PC mouse Save captured handwritten notes into built in flash memory over 100 A4 pages Upload captured handwritten notes to a computer via USB connection e No installation is required to activate the digital ink pen in Vista and Office 2007 e Standard ink refill and batteries No particular type of paper is required Including Easy Note Taker application software that helps you save edit e mail and organize your handwriting notes drawings sketches easily e Built in rechargeable battery and LCD status indication on the receiver unit e Including a handwriting recognition software MyScrpt Notes Lite that supports 22 languages so that you can transfer your writings into editi
38. ut previously 7 Clear Note 8 Select All Clears the entire notes on the screen Selects all items in the note 9 Properties Please keep in mind that this function is available when you select an area object on the notes first You can then change the color and width of the pen You also can double click on the stroke to achieve this function Change Pen width Bi Change Pen Color mod J Edit Note Edit View Configuration Tools Help Zoom In Zoom To Fit Zoom Out ToolsBars Status Bar Full Screen Ctrl Alt F 1 Zoom In 2 Zoom To Fit 3 Zoom out Enlarges the note viewing Resumes the note viewing to Reduces the note viewing size Its original size size 4 Tools Bars 5 Status Bar Selects which editing toolbars to show hide Shows or hides the status bar at the bottom of Standard Tools Manager si the Edit Note 6 Full Screen o erre Brings the Edit Note into full screen view Configuration Zoom 67 1 Pen Highlight Properties Select the color and width of the pen and highlighter Pen Width Highlight Color a A Highlight Width 4 Tools i Ec it Note Note Edit View Configuration Tools Help S rB OG Y Selector Pen Highlight Line Circle Rectangle Text Color Line Widthl Line Width2 Line Width4 Line Width8 jt rapt Zoom 67 CA PES oe 1 Selector Allows you to select any area objects on the notes
39. ver unit Do not place your hand Do not hold the pen like a with your hand between the pen and receiver paintbrush Keep the buttons of the pen close to your index finger or thumb while the device is connected to a computer so that you can click the button easily ASI a shoe Life CCD Indicator Unit is connected to PC Unit memory is 90 full It is highly recommended to MEMORY FULL Memory upload your files to your PC and delete them from memory Unit Battery Pen down or Pen move gt Pen down or Pen move Connected Battery is low Full Number of Always Saved Page 4 Unit is not connected to PC Data is uploaded to PC Less than 90 capacity used Battery is low Battery is sufficient Unit is Off Charging Pen down or Pen move Note Mode move M is full Unit is off emory Is full or error occurred Pen down or Pen The Receive Unit has a built in rechargeable battery No external battery is needed When the battery is low just recharge the battery by connecting the device to computer via USB connection 4 Using the Bundled Software gt Minimum System Require Introducing the Easy Note Note Manager Note Taker Edit Note Minimum System Requirements Microsoft Windows 2000 spx Windows XP sp2 Windows Vista 50MB available hard disk space 128MB 32 bit 1024 X 768 pixels ASI a shoe Life Introducing th
Download Pdf Manuals
Related Search