EP-4101DL USER`S MANUAL
Contents
1. 1 Click on Network Setup icon in Network program group 2 In Network Settings dialog box click mouse on Networks button to select the network operating system 3 In Networks dialog box check the radio button before Install Microsoft Windows Network and No Additional Network Press OK to go back to the Network Settings 10 Screen Click on Drivers button to select network driver In Network Drivers dialog box press Add Adapter button to enter Add Network Adapter dialog box Select Unlisted or Updated Network Adapter and press OK Windows will prompt an Install Driver dialog box In this time put the software diskette into floppy drive and press OK Select the Enhanced mode NDIS3 for string and press OK Follow Windows instructions to complete the installation and exit Windows Run INSTALL EXE from driver diskette s root directory Select Windows for Workgroup in Network Operating System screen and enter Driver Install screen If current settings are acceptable select Start Installation and go to step 13 Otherwise select Modify Parameters to make settings changed Move cursor to focus on the setting you want to make change and press Enter to select a fit value When the configuration is accepted press Enter on the OK field to exit the screen Back to step 11 Select NDIS Server LAN Manager as the network server you will attach2. If Windows asks you to supply your original Windows 95 installation or setup files insert the CD ROM or disks as requested and direct Windows 95 to the proper location 4 When asked if you want to restart your computer click Yes Installation for Windows NT 4 0 This section describes the installation for Windows NT under the condition that Windows NT is already installed in your computer If your computer is not yet networking installed refer to the Windows documentation for details Also remember to have your original Windows NT CD ROM handy before you begin the installation For Windows NT may ask for it during the installation 1 Before you turn on your computer make sure the PCMCIA Fast Ethernet Attached Port PC Card has been properly inserted into the free PCMCIA slot of your computer 2 Start Windows NT 3 Click Start Settings Control Panel Double click on the Network icon 4 When the Network window appears click on the Adapters tab Click on the Add button followed by Have Disk Put the driver disk into drive A 5 When asked to supply the path to the disk type a and click OK 6 Windows NT will ask you to supply the I O Base Interrupt and Memory values for the card Good values to start with are 300 for the I O Base and 5 for the IRQ 7 When you re finished click OK Windows NT will copy necessary files to your computer When the Network window reappears click on the Bindings tab C
3. to connected device Login to file server as user ADMIN 16 Run STARTNET to access the Novell network 18 APPENDIX A SPECIFICATIONS Network Interface Specifications e EEE 8023 for 10BaseT e JEEE 802 3u for 100BaseTX Data Rate e 10 100 Mbps Double data rate in Full Duplex mode Operating Systems For Notebook PC with accessory adapter e Novell Netware 3 x 4 x e Microsoft LAN Manager e Packet Driver Applications e Microsoft Windows for Workgroups 3 11 e Windows 3 1 e Microsoft Windows NT 3 51 NT 4 0 e Windows 95 98 e Windows 2000 Power Requirements Normal Operation 5V DC e 10M 190mA max e 100M 260mA max General Specification LEDs Three LEDs on the Attached Port 19 LINK RX Green ON Blink POWER TX Green ON Blink 10 100M Green OFF ON Environments Ranges Operating 32 F to 149 F 0 C to 65 C Storage 4 F to 158 F 0 C to 70 C Humidity 10 90 noncondensing Certifications FCC Part 15 Class A VCCI A 1998 CE Mark EN55022 EN55024 1998 Class A 20
4. PCMCIA Fast thernet Attached Port PC ard EP 4101DL USER S MANUAL FCC REGULATORY STATEMENTS Part15 Class A This device complies with Part 15 of FCC rules Operation is subject to the following two conditions 1 This device may not cause harmful interface and 2 This device must accept any interface received including interface that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the distance between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected d Changes or modifications not expressly approved by party responsible for compliance coul
5. d void the user the user authority to operate the equipment INTRODUCTION This PCMCIA Fast Ethernet Attached Port PC Card is designed for any Notebook PC with a PCMCIA or CardBus PC Card slot With this PC Card users can hook up to their Ethernet LANs at the speed of 100Mbps as 10 times faster than traditional LAN environment Moreover the support of full duplex mode makes the data rate double possible The fantastic feature of 10 100M auto negotiation eliminates the compatible troubles The PCMCIA Fast Ethernet Attached Port PC Card is Microsoft Plug and Play compatible The installation under Windows 95 98 2000 NT can be easily done in minutes The included NOS drivers ensure the compatibility to the widely used networking environments such as Novell Netware Microsoft LAN Manager TCP IP and more The wide range Card and Socket Services CSS compatibility also makes the users trouble free for their Intranet connection The PCMCIA Fast Ethernet Attached Port PC Card is simple to use providing automatic installation and no external power is required SYSTEM REQUIREMENTS An IBM compatible notebook computer with 386SX or higher processor At least one Type II PC Card socket Drivers and utilities provided with this product PCMCIA release 2 1 compliant Card Services and Socket Services OPERATING ENVIORNMENTS Novell Netware 3 x 4 x Microsoft LAN Manager Packet Driver Applications 1 Microsoft Window
6. dware device to work with an operating system This wizard will complete the installation for this device a Dual Speed 10 100 Port Attached PC Card A device driver is a software program that makes a hardware device work Windows needs driver files for your new device To locate driver files and complete the installation click Next What do you want the wizard to do 4 Windows will prompt an ADD NEW HARDWARE WIZARD dialog box In this time select Floppy disk drives and insert the driver 9 diskette Press Next When asked for the original Windows 2000 CD disks please follow the on screen instruction Found New Hardware Wizard Locate Driver Files Where do you want Windows to search for driver files Search for driver files for the following hardware device e PCMCIA Fast Ethernet Attached Port PC Card The wizard searches for suitable drivers in its driver database on your computer and in any of the following optional search locations that you specify To start the search click Next If you are searching on a floppy disk or CD ROM drive insert the floppy disk or CD before clicking Next ptional search locations IV Floppy disk drives T co i En 5 For the first time installation click Network icon in Control Panel to add Protocols Client and Service if needed 6 Reboot your computer to activate the new device Installation for Windows Workgroup 3 11 NDIS3 Driver for Workgroup
7. hoose your bindings Click on the Protocols tab and select your settings Do the same for the Services tab After your bindings settings and services are set click on the Close button Choose to restart your computer After Windows NT restarts be sure to log in Installation for Windows NT 3 51 l Open the Control Panel and choose Network Setup Click the Add Adapter button Select lt Other gt Requires disk from manufacturer Insert Driver Diskette in Drive A and type A in the path Select PCMCIA Fast Ethernet Attached Port PC Card from the list Set the IRQ level I O Port and Memory Base Address to the desired settings from the lists of free resources available And click OK Click OK to exit Network Setup Insert the PCMCIA Fast Ethernet Attached Port PC Card Reboot Windows NT Installation for Windows 2000 l Insert the PC Card into the slot In New Hardware Found dialog box select Driver from disk provided by hardware manufacturer 2 3 When the ADD NEW HARDWARE WIZARD dialog box appears press Next Found New Hardware Wizard Welcome to the Found New Hardware Wizard This wizard helps you install a device driver for hardware device To continue click Next When Windows prompt you a ADD NEW HARDWARE WIZARD dialog box select Search for the and press Next Install Hardware Device Drivers Le A device driver is a software program that enables a har
8. n is acceptable press Enter on the OK field to exit the screen Back to step 3 5 Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC BAT and NET CFG under user s agreement 15 6 Installation is complete Please reboot the computer to make your Netware connection Manual Installation 1 Copy the A NNETWARENLE1000DI COM file from diskette to the Netware client directory containing Novell s LSL COM IPXODI COM and NETx COM files 2 Follow Novell s instructions on using ODI programs You can substitute the LE1000DI COM whenever a reference is made to the Hardware Specific Module A typical ODI workstation startup batch file includes gt LSL Link Support Layer Module provided by Novell gt LE1000DI Hardware Specific Module gt IPXODI IPX Protocol Stack Module provided by Novell gt NETx DOS Shell Support Module provided by Novell gt LOGIN Novell Client Installation 1 Run the NetWare Client Install v1 21 Get the 4 Client disks from the network administrator or Run the NWCLIENT INSTALL EXE in a previous installation 2 A message appears on the screen asking you 16 6 whether or not you want the program to perform modifications on your AUTOEXEC BAT and CONFIG SYS files Answer Yes The program then modifies your AUTOEXEC BAT and CONFIG SYS files accordingly and creates backup copies The following me
9. ncel The installation program will proceed automatically Add New Hardware Wizard Windows driver file search for the device PCMCIA Fast Ethernet Attached Port PC Card Windows is now ready to install the best driver for this device Click Back to select a different driver or click Next to continue Location of driver cei Asnerio0 nF If you are asked to insert Windows 98 CD ROM in the selective drive please do so to have Windows copy all the necessary files to your system When the following window appears click Finish 6 Add New Hardware Wizard Ba PCMCIA Fast Ethernet Attached Port PC Card Windows has finished installing the software that your new hardware device requires When Windows ask if you want to restart your computer click Yes Installation for Windows 95 The installation procedures for the network driver may vary slightly depending on the version of Windows 95 you are using and also your current system configuration l Once the PCMCIA Fast Ethernet Attached Port PC Card is connected to your computer Windows 95 will automatically detect the new hardware device as shown below Insert the program diskette 1 into your floppy drive Click Next When the PCMCIA Fast Ethernet Attached Port PC Card message appears click Finish The Installation program will continue to copy the necessary files into your computer Follow the on screen instruction to proceed
10. nstructions to complete the installation and exit Windows Run INSTALL EXE from driver diskette s root directory Select Windows for Workgroup in Network Operating System screen and enter Driver Install screen If current settings are acceptable select Start Installation and go to step 13 Otherwise select Modify Parameters to make settings changed Move cursor to focus on the setting you want to make change and press Enter to select a fit value When the configuration is accepted 14 press Enter on the OK field to exit the screen Back to step 11 13 Select Novell Netware Server as the network server you will attach to and press Enter key 14 Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC BAT and NET CFG under user s agreement 15 Installation is complete Please reboot the computer to have the driver take effect Installation for Netware DOS ODI Driver Automatic Installation 1 Run INSTALL EXE from driver diskette s root directory 2 Select Netware 3 x or 4 x workstation in Network Operating System screen and enter Driver Install screen 3 Ifcurrent settings are acceptable select Start Installation and go to step 5 Otherwise select Modify Parameters to make settings changed 4 Move cursor to focus on the setting you want to make change and press Enter to select a fit value When the configuratio
11. o make settings changed Move cursor to focus on the setting you want to make change and press Enter to select a fit value When the configuration 1s accepted press Enter on the OK field to exit the screen Back to step 11 Select NDIS Server LAN Manager as the network server you will attach to and press Enter key Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC BAT and NET CFG under user s agreement Installation is complete Please reboot the computer to have the driver take effect ODI Driver for Workgroup l Click on Network Setup icon in Network program group to install network driver In Network Settings dialog box click on Networks button to select the network operating system 13 In Networks dialog box check the radio button before Install Microsoft Windows Network and Others Then select one of Netware Shell 3 X or 4 0 and above and press OK to go back the Network Settings screen Click on Drivers button to select network driver In Network Drivers dialog box press Add Adapter button to enter Add Network Adapter dialog box Select Unlisted or Updated Network Adapter and press OK Windows will prompt an Install Driver dialog box In this time put the software diskette into floppy drive and press OK Select the Netware ODI Driver string and press OK Follow Windows i
12. s for Workgroups 3 11 Microsoft Windows 3 1 Microsoft Windows NT 3 51 NT 4 0 Windows 95 Windows 98 Windows 2000 Lantastic 6 0 IBM OS 2 Warp Version 3 HARDWARE INSTALLATION 1 Locate the PCMCIA slot of your system 2 Align the PCMCIA Fast Ethernet Attached Port PC Card toward the PCMCIA slot Push evenly and steadily until it is seated 3 Connect the attached RJ 45 port with an Ethernet Hub Switch 4 You are now ready to continue the software installation SOFTWARE INSTALLATION Installation for Windows 98 1 Once the PCMCIA Fast Ethernet Attached Port PC Card is connected to your computer Windows 98 will automatically detect the new hardware device as shown below Click Next Add New Hardware Wizard This wizard searches for new drivers for Dual Speed 10 100 Port Attached PC Card A device driver is a software program that makes a hardware device work Insert the device driver diskette into your floppy drive When Windows prompts you What do you want Windows to do Select Search for the best driver for your device Recommended Click Next Follow the on screen instruction to proceed Add New Hardware Wizard Windows will search for new drivers in its driver database on your hard drive and in any of the following selected locations Click Nest to start the search E CD ROM drive Microsoft Windows Update Specify a location lt Back Ca
13. ssage appears Install support for MS Windows Y N Answer accordingly and provide a path 1f necessary The program displays the following Configure your workstation for backup by a NetWare server running software such as SBACKUP Y N No 3 Answer accordingly and provide a path 1f necessary Select a driver for your network board From the driver list select Other Drivers Go to the Insert the Driver Disk dialog box and specify the path where the ODI driver and INS files reside For example C NNETWARE Press Enter and select the target ODI driver Specify the driver s optional settings Press F10 to save to new configuration Highlight Install press here and press lt Enter gt to install The program copies the necessary files for NetWare Client Continue the installation 17 procedure to completion Upon completion a new NET CFG file will be created in your DOS directory Typically this file contains the following lines Link Driver LE100ODI PORT 320 INT 11 FRAME Ethernet_802 3 FRAME Ethernet_ 802 2 Edit STARTNET BAT for the ODI workstation performs the following SET NWLANGUAGE ENGLISH Set NetWare 4 X to English language LSL LE100O0DI IPXODI VLM LOGIN ADMIN Link Support Layer Module provided by Novell Hardware Specific Module IPX Protocol Stack Module provided by Novell DOS Support Module provided by Novell Change
14. to and press 11 15 Enter key Installation program starts copying related files from diskette to the destination directory and modifies AUTOEXEC BAT and NET CFG under user s agreement Installation is complete Please reboot the computer to have the driver take effect NDIS2 Driver for Workgroup 1 Click on Network Setup icon in Network program group In Network Settings dialog box click mouse on Networks button to select the network operating system In Networks dialog box check the radio button before Install Microsoft Windows Network and No Additional Network Press OK to go back the Network Settings screen Click on Drivers button to select network driver In Network Drivers dialog box press Add Adapter button to enter Add Network Adapter dialog box Select Unlisted or Updated Network Adapter and press OK Windows will prompt an Install Driver dialog box In this time put the software diskette into floppy drive and press OK Select the Real mode NDIS2 for string and press OK Follow Windows instructions to complete the 12 15 installation and exit Windows Run INSTALL EXE from driver diskette s root directory Select Windows for Workgroup in Network Operating System screen and enter Driver Install screen If current settings are acceptable select Start Installation and go to step 13 Otherwise select Modify Parameters t
Download Pdf Manuals
Related Search