Source Four LED v1.3.0 Quick Guide
Contents
1. Idle Power Current 4 3W 0 085A 4 35W 0 078A 4 0W 0 065A 100 Boost Power Current 159 8W 1 81A 157 4W 1 35A 154 8W 0 695A Source Four LED Profile Page 7 of 7 Electronic Theatre Controls Inc2. All Rights Reserved i Product information and specifications subject to change 7460M1300 1 3 0 M Rev C Ml Released 2012 08 W ETC intends this document to be provided in its entirety Source Four LED Profile Page 1 of 7 Electronic Theatre Controls Inc ETC Source Four LED Quick Guide Install Lens Tube Step 1 Slide lens tube into shutter barrel Step 2 Install the lens zoom knob Step 3 Install the Phillips screw in the top of the lens barrel Install Fixture General use position Low clearance position Step 1 Hang or mount the fixture Step 2 Attach safety cable Step 3 Insert additional accessories such as a top hat etc Install Lens Tube WARNING Use only hardware rated for total weight of fixture and accessories A safety cable or other approved safety device must be securely attached to the safety cable loop before loosening the clamp Source Four LED Profile Page 2 of 7 Electronic Theatre Controls Inc ETC Source Four LED Quick Guide Connect Connect Power Thru DMX Thru Step 1 Attach power cable to Power In Step 2 Attach 5 pin XLR cable to DMX In if using external control Step 3 Connect power cable to AC power Step 4 Plug XLR cable if using into data source Step 5 Link additional fixtures via Power Thru and DMX Thru connectors WARNING No more than nine Source Four LED fixtures on Power Thru non dimming 100 to 24
3. 0 VAC 50 60 Hz Up to 32 device loads on the DMX daisy chain Disconnect Power and DMX before all cleaning and maintenance Focus Step 1 Supply power and wait for the fixture to boot up Step 2 Press Light Bulb to open Presets amp Sequences Step 3 Select Focus and press Enter to turn on LED array Step 4 Adjust fixture s position Step 5 Once focus is set press Enter to turn off LED array and then Home to return to home screen Source Four LED Profile Page 3 of 7 Electronic Theatre Controls Inc ETC Source Four LED Quick Guide Soft Focus Diffuser Soft Focus Diffuser THIS SIDE TOWARDS FRONT Step 1 Install the diffuser into an A Sized Pattern holder Step 2 Install a pattern in front of the diffuser if needed Step 3 Insert the pattern holder and diffuser into the Pattern holder slot making sure the writing on the diffuser faces the front of the fixture Address Step 1 From the home screen press Enter to open Main Menu Step 2 On the Main Menu scroll to DMX Start Address press Enter Step 3 Use Up or Down to scroll to desired address Step 4 Press Enter to select address number Step 5 Press Home to return to home screen DMX address is not needed if using standalone or master slave control Features Quick Setup Step 1 On the Main Menu scroll to Quick Setups Step 2 Press Enter Step 3 Scroll to the desired setup and then press Enter An asterisk indic
4. ETC Quick Guide Source Four LED Profile Overview For complete information and step by step instructions see Source Four LED Profile User Manual Yoke Safety cable loop Yoke X Accessory locking knob y oN retainer Accessory holder LCD Keypad pr Status L indicators Power Thru DMX Thru Power In a DMX In Up ANS Ay Light Bulb Back lt lt l mi Enter Home con he too i Down N JgPowe Power Indicates AC power is On O DMX DMX Indicates control signal is Active O O Error Error Indicates data error high temperature or other unusual status Corporate Headquarters W 3031 Pleasant View Road P O Box 620979 Middleton Wisconsin 53562 0979 USA m Tel 608 831 4116 I Fax 608 836 1736 London UK Unit 26 28 Victoria Industrial Estate Victoria Road London W3 6UU UK IE Tel 44 0 20 8896 1000 m Fax 44 0 20 8896 2000 Rome IT E Via Pieve Torina 48 00156 Rome Italy ml Tel 39 06 32 111 683 I Fax 44 0 20 8752 8486 Holzkirchen DE E Ohmstrasse 3 83607 Holzkirchen Germany i Tel 49 80 24 47 00 0 m Fax 49 80 24 47 00 3 00 Hong Kong E Rm 1801 18 F Tower 1 Phase 1 Enterprise Square 9 Sheung Yuet Road Kowloon Bay Kowloon Hong Kong ll Tel 852 2799 1220 W Fax 852 2799 9325 Service Americas service etcconnect com ml UK service etceurope com ml DE techserv hoki etcconnect com ml Asia service etcasia com Web www etcconnect com il Copyright 2012 ETC
5. Electronic Theatre Controls Inc ETC Source Four LED Quick Guide DMX Profiles DMX Profiles Tungsten and Daylight Channel Control 1 Intensity 2 Strobe 3 Fan control Lustr Channel HSI HSIC RGB Studio Direct 1 Hue Hue Red Intensity Color 1 2 Hue fine Hue fine Green Color temp Color 2 3 Saturation Saturation Blue Tint Color 3 4 Intensity Intensity N A N A Color 4 5 Strobe Strobe Strobe Strobe Color 5 6 Fan control Fan control Fan control Fan control Color 6 7 N A Color temp N A N A Color 7 8 Plus7 on off Plus7 on off Plus7 on off Plus7 on off Intensity 9 Plus7 1 Plus7 1 Plus7 1 Plus7 1 Strobe 10 Plus7 2 Plus7 2 Plus7 2 Plus7 2 Fan control 11 Plus7 3 Plus7 3 Plus7 3 Plus7 3 N A 12 Plus7 4 Plus7 4 Plus7 4 Plus7 4 N A 13 Plus7 5 Plus7 5 Plus7 5 Plus7 5 N A 14 Plus7 6 Plus7 6 Plus7 6 Plus7 6 N A 15 Plus7 7 Plus7 7 Plus7 7 Plus7 7 N A When this feature is enabled Typical Power Consumption Lustr tev 0 240V Idle Power Current 4 27W 0 084A 4 38W 0 079A 4 2W 0 068A 100 Boost Power Current 130 8W 1 48A 129 9W 1 11A 126 4W 0 576A Daylight tv tv ZAV Idle Power Current 4 3W 0 083A 4 35W 0 077A 4 04W 0 066A 100 Boost Power Current 165 2W 1 87A 163 3W 1 39A 160 3W 0 718A Tungsten 00 720V ZAV
6. ates which setup is active Step 4 Press Home to return to the home screen The top line of the home screen displays the name of the active setup Individual features and settings are adjustable under the Advanced menu Consult the User Manual for more information on advanced features of Source Four LED fixtures Source Four LED Profile Page 4 of 7 Electronic Theatre Controls Inc ETC Source Four LED Quick Guide Quick Setups Quick Setups Lustr Quick Setup Features Recommended For General Smooth dimming good consistency direct General lighting rentals color control simple operation Tungsten like dimming HSI color control with Stage Plus 7 fine tuning fast color mixing and Theatrical lighting consistency console output snapshot to record stand alone presets Maximum consistency in extreme High temperature environments installations XT Arch a YE eras applications reduced brightness with limited access High Impact Maximum brightness quick response RGB Video based control effects lighting concerts color control reduced consistency Three point control White Point CCT z mio Eii Studio Intensity and Tint DMX or standalone Video and film lighting white light only applications operation Parameter General Stage XT Arch High Impact Studio DMX Settings Profile Direct HSI HSI RGB Studio Strobe Enabled Enabled Enabled Enabled Enabled Data poss Instant In
7. stant HLL 4ever Instant N A Setting Plus Seven N A Enabled Disabled Disabled Disabled Fan Control DMX DMX DMX DMX DMX LED Settings Output Setting Regulated Regulated Protected Boost Regulated Dimming Standard Incandescent Standard Quick Linear Curve Red Shift N A Disabled Disabled Disabled N A White Point N A 3200 3200 5600 N A Local Settings Status On On On On On Indicators Overtemp Dark Dark Visible Dark Visible Source Four LED Profile Page 50f7 Electronic Theatre Controls Inc ETC Source Four LED Quick Guide Quick Setups Tungsten and Daylight Quick Setup Features Recommended For z Linear dimming simple standalone operation Video or film lighting installations without Studio via the UI DMX control Tungsten like dimming stage friendly Theatrical lighting installations mixed with Stage settings DMX fan control tungsten Single Standard dimming automatic fan only 1 Architectural applications with streamlined Channel DMX channel control Parameter Studio Stage Single Channel DMX Settings Profile Intensity Intensity Intensity Strobe Enabled Enabled Disabled Data Loss Setting N A Instant Instant Fan Control DMX DMX Automatic LED Settings Output Setting Regulated Regulated Regulated Dimming Curve Linear Incandescent Standard Local Settings Status Indicators On On On Overtemp Visible Dark Dark Source Four LED Profile Page 6 of 7
Download Pdf Manuals
Related Search