Home

BKK 2132 K Household Steam Iron User Manual

image

Contents

1. 4 Turn the Temperature Dial to the middle point of 1 dot 2 dots 3 dots or maximum setting 5 Switch off the iron by turning the Temperature Dial in anti clockwise direction when it is not in use even for a short period of time Turn the Temperature Dial to eMin position 6 Disconnect the iron from mains supply outlet when filling or emptying water 7 Remove the water remained in the water tank 8 Use the Self Cleaning function at least once a month 9 Switch off the steam function by moving the steam control knob to position when it is not in use even for a short period of time 10 If the supply cord is damaged it must be replaced by the manufac turer or its service agent or similarly qualified person in order to avoid a hazard DO NOT S 1 Do not allow children touch the iron or the power cord when ironing 2 Do not leave the iron unattended when it is connected to a mains supply outlet 3 Do not use an extension power cord set unless competent authority has approved it 4 Do not add perfumed vinegar or other chemical liquids into the water tank they can damage the iron seriously 5 Do not immerse the iron in water or any other liquid 6 Do not use the iron when it is damaged or it works improperly 7 Do not roll the power cord around the iron for storage until it has cooled down completely 8 Do not attempt to open the cabinets or dismantle any parts from the iron
2. BKK 2132 K Household Steam Iron User Manual BEKO Read this manual prior to initial operation of the product Dear Customer We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you very good results We advise you to read through this manual carefully before using your product and keep it for future reference The User Manual will help you use your machine in a fast and safe way e Read the User Manual before installing and starting your product e In particular follow the instructions related to safety e Keep this User Manual within easy reach for future reference e Also read all additional documents supplied with this product Remember that this User Manual is also applicable for several other models Differences between models will be identified in the manual 9 This product has been produced in environmentally friendly modern facilities CE CONTENTS 1 Safety Warnings 2 Technical Aspects Of Your Machine 3 Hints For Ironing 4 8 4 Maintenance And Cleaning 1 Safety Warnings For safety purpose you should read these instructions carefully before using the iron for the first time DO S 1 Check the mains voltage stated on the iron 2 Unwind and straighten the power cord before use 3 Switch on the iron by turning the Temperature Dial in clockwise direc tion pilot light glows
3. ect any setting 2 Fill the water tank as described in How To Fill Water 3 Aim the nozzle to the garment 4 Press the Spray Button Note It may be necessary to press the spray button a few times to start this function Dry Ironing 1 Connect the iron to a suitable mains supply outlet 2 Turn the Temperature Dial in clockwise direction select e 1 5 dot ee 2 dots or eee 3 dots according to the recommendation of garment label 3 Pilot light glows indicating the iron is switched on 4 When the required temperature is reached pilot light goes off The iron is ready for use 5 Move the Temperature Dial in anti clockwise direction to Min the iron is switched off 6 Disconnect the iron from mains supply outlet 7 When the iron gets cool complete ly store it vertically in a safe place Steam ironing 1 Fill the iron as described in How To Fill Water 2 Connect the iron to a suitable mains supply outlet 8 Turn the Temperature Dial in clockwise direction to eee 3 dots setting For optimum steam quality do not use 1 dot or 2 dots setting for steam ironing 4 Pilot light glows indicating the iron is switched on 5 Pilot light goes off when the required temperature is reached 6 The iron is ready for use 7 Move the Variable Steam Control Self Cleaning Knob to give the desired amount of steam 8 Turn the Temperature Dial in anti clockwise direction
4. er tank up to half 2 Place the iron on a surface in upright standing position 3 Connect to a mains supply outlet 4 Turn the Temperature Dial in clockwise direction to Max setting 5 Pilot light glows indicating the iron is switched on 6 Pilot light goes off when the re quired temperature is reached 7 Wait for one more cycle pilot light glows and goes off 8 Turn the Temperature Dial in anti clockwise direction to Min 9 Disconnect the iron from mains supply outlet 10 Hold the iron horizontally over a sink 11 Pull and hold the Steam Control Self Cleaning Knob to SI Descaling position 12 Steam and boiling hot water will drain from the holes on the soleplate washing away the scales and minerals that have built up inside the Steam Chamber 13 Gently move the iron back and E forth until the water tank is empty 14 When Self Cleaning is complete release the Steam Control Self Cleaning Knob 15 Rest your steam iron back on its heel rest and allow to fully cool down 16 Wipe the soleplate with a cold damp cloth Caution Keep skin body away from the hot water Anti Drip feature 1 Anti drip system which is de signed to prevent water escaping from the soleplate when the iron is too cold automatically 2 During use the anti drip system may emit a loud clicking sound particularly during heat up or whilst cooling down This is perfectly nor mal and indicates tha
5. he Steam Control Self Cleaning Knob to amp position 2 Disconnect the iron from the mains supply outlet 8 Hold the iron upside down and gently shake it to remove any re maining water out of filling hole 4 When the iron get cool complete ly store it vertically in a safe place Note Set the Steam Control Knob toe position before storing the iron Cleaning The Iron 1 Disconnect the iron from the mains supply outlet 2 Use a damped cloth or non scratching cleaner to remove any deposits on the sole plate or the cabinets Note Never use sharp or rough objects ee
6. rics 1 Fill the iron as described in the section of How To Fill Water 2 Turn the Temperature Dial to Max setting 3 Pilot light glows indicating the iron is switch on E 4 Pilot light goes off when the required temperature is reached The iron is now ready for use 5 Hold the iron between 15 and 30 centimeters away from the garment 6 Press the Burst of Steam Button once 7 Steam will penetrate into the gar ment removing the wrinkles 8 For Stubborn wrinkles wait a few seconds before pressing the Burst Of Steam Button again 9 Most wrinkles can be removed within three presses Note It may be necessary to press the burst of steam button a few times to start this function For optimum steam quality do not operate the Burst Of Steam more than three times in succession Build in Anti scale System The build in anti scale cartridge is designed to reduce the build up of limescale which occurs during steam ironing This will prolonge the work ing life of your iron Note The anti scale cartridge will not completely stop the natural process of limescale build up Self Cleaning This function removes the scales and minerals built up in the Steam Chamber The iron will remain in the best condition if this function is performed at least once a month or more regularly depending on the hardness of the water used 7 DODD Hd DOYS 1 Fill the iron as described in How To Fill Water fill the wat
7. t the system is functioning correctly Automatic cord reel Features This iron have equipped with Cord storage feature for convenient stor age of the power cord Grasp the cord and slowly pull out the length that you need for pressing When you need to store the iron grasp the plug with one hand and push the button on the top cord storage device to recoil the cord Be careful not let the snap back towards your body Auto Shut off Features The Auto shut off feature will oper ate automatically when the iron is unattended and it is connected to a mains supply outlet Auto shut off in horizontal 1 The iron will switch off auto matically at 30 seconds if the iron is immobile in the ironing position horizontal 2 Auto shut off indicator light blinks indicating the iron is Auto Off mode 3 Simply moving the iron the iron will back on Auto shut off in vertical 1 The iron will switch off automati cally between 5 to 10 minutes if the iron is left on its heel rest position vertically 2 Auto shut off indicator light blinks indicating the iron is Auto Off mode 3 Simply moving the iron the iron will back on Note The iron will take about 60 seconds to reach its previous sole plate temperature E 4 Maintenance And Cleaning Draining The Water to remove the deposits on the sole plate Never use any abrasive vinegar or descaling agents to clean the iron D D 1 Move t
8. there is no serviceable part inside E E Technical Aspects Of Your Machine 1 Spray Nozzle 7 Auto shut off indicator 2 Steam Control Self Cleaning Knob 8 Cord storage Button 3 Water Inlet Cover 9 Temperature Dial Pointer 4 Spray Button 10 Temperature Dial 5 Burst Of Steam Button 11 Filling Beaker 6 Pilot Light Voltage Frequency 220 240 V 50 60 Hz Power 1850 2200 W Soleplate PTFE Non stick coated Isolation class All declared values on the product and on the printed leaflets are picked up after laboratory measurements performed according to related standarts These values may differ upon usage and ambient conditions 3 EN E Hints For Ironing 1 Sort out the articles to be ironed according to the type of fabric This will minimize the frequency of temperature adjustment for different garments 2 Test ironing a small area on the backside or inside the garment if you are unsure about the type of fabric Start with a low temperature and increase gradually 3 Wait for about three minutes before ironing heat sensitive fabrics Temperature adjustment needs cer tain time to reach the required level no matter it is higher or lower 4 Delicate fabrics such as silk wool velour etc are best ironed with an ironing cloth to prevent shine marks 5 You may need a few times of press to activate the spray burst and vertically burst function Read The Garment Labels and follo
9. to Min the iron is switched off 9 Disconnect the iron from mains supply outlet 10 When the iron gets cool com pletely store it E vertically in a safe place 4 Note Set the Steam Control Knob o amp position after use Burst of Steam This function provides extra amount of steam to remove stubborn wrinkles 1 Fill the iron as described in the section of How To Fill Water 2 Turn the Temperature Dial to eee 3 dots setting 8 Pilot light glows indicating the iron is switched on 4 Pilot light goes off when the required temperature is reached 5 The iron is ready for use 6 Press the Burst Of Steam Button 7 Steam will shoot from the holes of the soleplate into the fabric being 6 ironed and removing the wrinkles 8 For stubborn wrinkles wait a few seconds before pressing the Burst of Steam Button again Most wrinkles can be removed within three presses Note It may be necessary to press the burst of steam button a few times to start this function For optimum steam quality do not operate the Burst Of Steam more than three times in succession Burst of Steam in Vertical Posi tion Warning Do not apply steam on any clothes or fabrics that are being worn by human or pets Tempera ture of steam is very high This function provides extra amount of steam to remove wrinkles on deli cate garments in hanging position hanging curtains or other hanging fab
10. w the manufacturer s ironing instructions that are often shown by symbols similar to the follows Temperature Control Setting Cupro Elastsne Polyester Polyamide Silk Polypropyl Triacetate ene Viscose Wool How To Fill Water 1 Disconnect the iron from mains supply outlet 2 Move the Steam Control Self Cleaning Knob to amp position 3 Release the Water Inlet Cover 4 Fill water through the water inlet hole 5 Fill up to the Max level marked on the side of water tank Note Do not use chemically descaled water or any other liquids First Time Ironing 1 Remove any protective films or stickers from the sole plate and the cabinet 2 Grasp the cord and slowly pull out to the length you desired See How to use the Cord storage features 3 Fill the water tank See How To Fill Water 4 Connect the iron to a suitable mains supply outlet E 5 Turn the Temperature Dial in clockwise direction to maximum position pilot light glows 6 Pilot light goes off when the required temperature is reached 7 Move the Steam Control Self Cleaning Knob to db position steam starts coming out from the holes in the sole plate 8 Begin first time ironing with an old towel 9 When the water tank is empty and there is no more steam produced the preparation work is completed The iron is now ready for proper use Spraying 1 This function can be used any time and is not aff

Download Pdf Manuals

image

Related Search

Related Contents

取扱説明書はこちら  Manuel d`utilisation    WL-211F User Manual  USER MANUAL Reply  Formularios telemáticos Manual de usuario  PHYSICS & USER MANUAL - Genie  EE460M Lab Manual - Front page - The University of Texas at Austin    Seagate Laptop SSHD 2.5" 500GB Hybrid SSHD  

Copyright © All rights reserved.
Failed to retrieve file