100 LED SOLAR MOTION LIGHT USER MANUAL
Contents
1. Why does the solar motion light not illuminate at night See previous page in USING THE CONTROL DIALS It may be required to readjust the light s LUX dial setting Why does the solar motion light appear to strobe or flash Turn the solar motion light to the OFF position Allow the batteries to recharge for two full sunny days At the end of the second day turn the light to the AUTO position See previous page in USING THE CONTROL DIALS to confirm the light s LUX dial settings The solar motion light should now work as required Will decorative or street lights have an effect on the motion sensor s Yes the sensor of the solar motion light is light sensitive ability to operate For nighttime usage ensure no other light activates the motion sensor What type of battery does the solar motion light require to operate The solar motion light requires the use of Ni MH rechargeable AA batteries WARRANTY ONE YEAR LIMITED WARRANTY If during normal use this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material and workman ship within one 1 year from the date of original purchase simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store At its discretion PATRIOT LIGHTING agrees to have the product or any defective part s repaired or replaced with the same or similar PATRIOT LIGHTING product or part free of charge within the stated warranty2. period when returned by the original purchaser with original sales receipt This warranty 1 excludes expendable parts including but not limited to light bulbs and batteries 2 does not cover damage that has resulted from abuse or misuse and 3 does not cover any losses labor injuries to persons property or costs This warranty does give you specific legal rights and you may have other rights which vary from state to state For questions regarding this product please call 1 888 478 6435 from Monday to Friday 8 30 am to 5 00 pm Eastern Standard Time Proof of purchase including date and an explanation of complaint is required for warranty service Page 3
3. the correct polarity and when installing the replacement batteries Replace the whole set of batteries at one time Do not combine old and new batteries together or those with different specifications CARE AND MAINTENANCE From time to time ensure the plug between the solar panel and light is securely connected It is advisable to adjust the angle of the solar panel to optimize the exposure of the sun during the winter months e The solar panel should be cleaned with a damp cotton cloth on a regular basis This will ensure optimal performance and battery charging Periodically utilize the same technique to clean the lens of the motion light Never let any abrasive material come into contact with the solar panel TROUBLESHOOTING PROBLEM O somwmons O Where should the solar panel be mounted Mount the solar panel in a position that will enable the most amount of light to be absorbed In the Northern Hemisphere this is usually south facing Does the solar panel require direct sun to charge The solar panel can charge the internal batteries in direct and indirect light For best results try to optimize the solar panel s sun exposure Can additional or extended cable wire for the solar panel be At this point there are no extensions available for the cable that connects the light to purchased the solar panel Any additions to the cable will void the warranty
4. Part T atriot 343 2461 LIGHTING 100 LED SOLAR MOTION LIGHT USER MANUAL THIS PRODUCT IS DESIGNED TO THE HIGHEST TECHNICAL SPECIFICATIONS AND STANDARDS IT WILL SUPPLY YEARS OF MAINTENANCE FREE USE PLEASE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO INSTALLATION KEEP THESE INSTRUCTIONS SAFE FOR FUTURE REFERENCE IMPORTANT INFORMATION The motion light and solar panel are both weatherproof The motion light can be mounted indoors but the solar panel must be installed outdoors to receive light from the sun If using a step ladder have a second person help install the solar motion light Prior to installation make sure all the components mentioned in the part list below are present Never look directly into the solar motion light when illuminated PARTS LIST A C A 100 LED Motion Light x1 B Solar Panel x1 100 Super bright LEDs 1 15ft wire B Mounting bracket 2 Mounting bracket D HHH ON OFF AUTO switch C Mounting Screws x6 Socket for solar panel plug Motion sensor and control dials D Anchors x6 E AA Batteries x5 TOOLS REQUIRED not included Phillips EEFI Eeee Poweron Serewarver Ponen taddor Eye Protection tovi INSTALLATION INSTALLING THE MOTION LIGHT Top View fall i A2 D iD c lc Step 1 Step 2 Step 3 Step 4 Step 5 Remove the mount
5. ing bracket Place the mounting bracket A2 Use a power drill to drill the holes Screw the mounting bracket A2 Re attach the mounting bracket A2 by removing the side bolts on the chosen surface Using a in the chosen mounting surface to the chosen surface with the A2 to the light and tighten the for installation pencil mark the two screw holes included screws and anchors side bolts A level may be required C amp D Page 1 INSTALLATION CONTINUED INSTALLING THE SOLAR PANEL Vv Solar Panel Solar Panel Step 1 For best results maximize sun exposure by orientating the solar panel B towards the sun Be aware of overhanging trees or obstacles that can affect sun exposure Side View Step 3 Use a power drill to drill the holes on the chosen mounting surface OPERATION 1 CONNECTING THE SOLAR PANEL TO THE LIGHT Front View Connect the wire from the solar panel B1 into the socket A4 located under the light fixture The solar motion light will now begin to charge 3 different control dials A5 adjust the sensitivity to motion light s duration and sensitivity to light SENS Sensitivity This dial determines the range of motion detection TIME This dial sets the duration of illumination time LUX Light level required for activation This dial tells the sensor the level of darkness that must be reached before the light turns on x
6. t the sensor will trigger the light to turn on in the daytime the sensor will only trigger the light to turn on at dusk or when it is dark This is the ideal position for general usage The light has a 180 detection zone up to 30 feet Left side view Right side view Step 2 Place the solar panel mounting bracket B2 on the chosen surface Using a pencil mark the four screw holes through the bracket Wall Side View Step 4 Screw the solar panel B to the chosen surface with the included screws and anchors C amp D 2 CHARGING THE MOTION LIGHT Front View I eget h J Prior to using the solar motion light the solar panel needs to be connected to the light for a period of three days This initial charge should be done in the OFF position After the third day the included batteries will be fully charged and the solar motion light will be ready for operation Flip the switch to the AUTO position The ON position acts to override the motion activation function This will allow a limited period of constant illumination Page 2 OPERATION CONTINUED Batteries are located in the battery housing behind the light fixture Select the OFF position A3 on the light prior to opening the battery housing Remove the four screws to reveal the batteries When replacing the batteries be sure to Match the replacement battery specifications with the batteries that have been removed Observe
Download Pdf Manuals
Related Search