Alaris ® Auto-ID module/supports Guardrails ® Suite MX (v8)
Contents
1. Bi o QUICK REFERENCE GUIDE A e To ensure proper operation of the Alaris System you must be familiar with related features disposables administration sets set up and programming e This guide is not intended to be comprehensive instructions for the setup and operation of the Alaris System For complete instructions along with Warnings and Cautions refer to Alaris System User Manual v9 Associate Alaris PC point ofcare unit PC Unit with a new patient ID Associate PC Unit with Patient gt 1 Attach handheld scanner to eT ASS i a A connectionn port on Alaris Auto 1 Attach handheld scanner to af ID module connection port on Alaris Auto ID N 2 Power On the PC unit more gt 3 Press Yes No soft key to select 2 Press SCAN button on handheld Naw Patient scanner to scan barcode on O patient ID band a 4 Press Yes soft key to accept l l current Profile or NO to proceed 3 Verify Patent ID displayed on the w to profile selection screen and Main screen is correct S confirm selection Authorized User Mode Tamper 2 A green light in the Ready window Resist Mode e will be illuminated on the Alaris 4 Power On the PC Unit D Auto ID module l l 2 Press Yes No soft key to select 5 The ie ae nee he New Patient appear Press e a Alaris Auto ID module y 3 Confirm correct profile selection or SCAN button on the handheld 4 Enter patient ID Tamper Resist scanner to scan barcode o2. ess and hold Tampler Resist Switch back of PC Unit for 3 4 seconds Programming a Primary Infusion 1 A green light in the READY window will be illuminated on the Alaris Auto ID module 2 Press SCAN CANCEL key on the Alaris Auto ID module or the SCAN button on the handheld scanner to scan barcode on IV container 3 Press CHANNEL SELECT key on the appropriate infusion module Infusion is in progress Press SCAN CANCEL key on the Alaris Auto ID module or the SCAN button on handheld scanner to scan barcode on secondary IV container Press CHANNEL SELECT key on the appropriate Alaris Pump module Primary infusion parameters will be displayed Press SECONDARY soft key on the appropriate infusion module Program secondary infusion following the Directions for Use for the Alaris Pump module P00000063
3. n feature will be enabled patient identification band 5 Press SCAN key and scan e If scan is successful an audible tone will sound and Patient ID will display on the PC Unit screen O CareFusion San Diego CA 800 854 7128 2006 2014 CareFusion Corporation or one of its affiliates e Verify Patient ID displayed on the main display screen clinician ID badge to unlock the programming panel pu All rights reserved cO oO O n ar O mur lt N pe amp lt 6 Program infusions on the Alaris 4 Program the infusion following System following the User Manual the User Manual for the module for the appropriate infusion selected module Programming a Secondary Infusion System will change to Tamper Resist mode if idle for five minutes Follow the Directions for Use for the Alaris Pump module to start Notes Secondary Infusion while Primary e Authorized User Mode is only enable if feature is enabled in cif selected profile and if Alaris Auto ID module is attached to the PC Unit Whether Authorized User Mode is enabled or disabled it is possible 2 to associated a clinician ID to an infusion event by either scanning the clinician ID badge or by manually inputting the clinician ID number through the OPTIONS menu e Ifthe system is configured to do so it is possible to disable Authorized User Mode without scanning a clinician s ID Pr
Download Pdf Manuals
Related Search