UC-SOFT PRO
Contents
1. UC SOFT PRO User s Manual 4 6 Operator It includes OPERATOR LEVEL SETUP and OPERATOR INFORMATION Both the installer and the end user should be familiar with this section 58 UC SOFT PRO User s Manual 4 6 1 Operator Level It is a predefined level to determine which function of the UC SOFT PRO can be accessed by the OPERATOR Select Operator Level from Configuration menu under Operator Then the main Access Level dialog box will be displayed Record 0 0 Add al Close Operator Level ID Description ormed By Uperator Level ID x Search Fig 4 6 1 1 59 UC SOFT PRO User s Manual 1 Add Operator Level Click Add button and the detail of the Operator Level dialog box will be displayed Operator Level fo Uperator Level IL Card Operator Description Invalid login attempts allowed E Configuration Hardware M Add Edi M Delete E adging We Add Iw Edit W Delete Uperator If Add Iw Edit W Delete Timezone Ww Add lw Edit W Delete Holiday Iv Add I Edit If Delete Wallpaper Iw Edit Operation Event View view Alarm View If Wey W Acknowledge Alarm W Clear Alarm Panel Control Operate Database Maintenance fy Backup IY Restore IY Archive W Purge Report History ME View and Print Attendance li View and Print Configuration W view and Print Cancel Fig 4 6 1 2 Operator Level ID Maximum 25 Characters Unique name for each Operator Level record Description Ma2. Door Lock of Door 2 Output 3 Door Lock of Door 3 Output 4 Door Lock of Door 4 33 UC SOFT PRO User s Manual It is not necessary to use the default setting but it will be easier to set up the system by using the default setting of UC SOFT PRO Output ID Maximum 25 Characters Unique name for each Output record Description Maximum 40 Characters Description of the Output record Enable for Panel Control So that Panel Control can directly control the Output Auto ON Timezone At the specific Timezone the Output will be Energized automatically Auto relock by Input 1 2 3 4 for UC 1000 4 only The Output will be OFF when the door has been closed after a valid access It will disregard if the pulse time is finish or not Toggle Output status when it is pulse Change the Output status 1 e OFF gt ON or ON OFF if the Output has been pulsed Pulse Time Pulse Time of the Output x 0 1 s for UC 2000 panels only Pulse time can be set from 0 to 6 3 seconds with increment of 0 1 second x 1 s Pulse time can be set from 0 to 63 seconds with increment of 1 second Interlock to trigger another Input or Output if the Output has been triggered There are five types of Interlock Action 1 No Action take no action 2 Shunt Energize Shunt or Energize to the other Input or Output 3 Un shunt De energize Un shunt or De energize to the other Input or Output 4 P
3. Magnetic Contact Sensor of Door 1 Input 2 Magnetic Contact Sensor of Door 2 Input 3 Magnetic Contact Sensor of Door 3 Input 4 Magnetic Contact Sensor of Door 4 Input 5 Exit Button of Door 1 Input 6 Exit Button of Door 2 Input 7 Exit Button of Door 3 Input 8 Exit Button of Door 4 It is not necessary to use the default setting but it will be easier to set up the system by using the default setting of UC SOFT PRO Input ID Maximum 25 Characters Unique name for each Input record Description Maximum 40 Characters Description of the Input record Enable for Panel Control So that Panel Control can directly control the Input Disable Alarm Message No Alarm messages will be sent from the Panel even though the Input has been triggered Auto Shunt Timezone At the specific Timezone the Input will be shunted automatically Normal Close Normal Open Choose for Normal Close or Normal Open Input device Debounce Time Debounce Time of the Input x 0 1 s for UC 2000 panels only Debounce time could be set from 0 to 12 6 seconds with increment of 0 1 second x 1 s Debounce time could be set from 0 to 126 seconds with increment of 1 second for UC 2000 panels from 0 to 63 seconds with increment of 1 second for UC 1000 panels Pulse Time 0 to 127 seconds for UC 2000 panels and 0 to 63 seconds for UC 1000 panels Shunt period when the Input has been triggered Interlock to
4. Sorted By combo box then type 1n the searching text for searching 36 4 2 7 4 2 8 UC SOFT PRO User s Manual Additional Input and Output Points It is used for the setup of additional input and output points for UC 1000 panels Please refer to Panel configuration Schedule There are three types of Schedule 1 Date amp Time update UC SOFT PRO will update the Date and Time of all Local Panels at the Scheduled Date Time If the Schedule is missed due to UC SOFT PRO is being offline the Schedule will suspend until UC SOFT PRO is online again 2 Auto Dial up UC SOFT PRO will connect to the remote site automatically to update Card information and collect transactions in the remote site at the Scheduled Date Time If the Schedule is missed due to UC SOFT PRO 1s being offline the Schedule will suspend until UC SOFT PRO is online again 3 Send Command File UC SOFT PRO will send the Command File to the Loop specified in the Command File at the Scheduled Date Time If the Schedule is missed due to UC SOFT PRO is being offline the Schedule will suspend until UC SOFT PRO is online again Select Schedule from Configuration menu under Hardware Then the main Schedule Group dialog box will be displayed aT a UC SOFT PRO User s Manual J Schedule a el E te te Update Date amp Time ss 20020602 0000 Date amp Time update Schedule ID Fig 4 2 8 1 _ 38 UC SOFT PRO User s Manual 1 Add S
5. 2f2e 2001 S00 Bonnie Wong Engineering 2001 02 01 to 2001 02 10 Day Office Hour IH THU 0 00 17 00 FRI 09 00 17 00 DAT 09 00 13 00 SUN MOM TUE WED 09 00 THU 09 00 FRI 03 00 DAT 09 00 03 00 09 00 17 00 17 00 17 00 17 00 17 00 13 00 S002 John Lee Engineering 2001 02 01 to 2001 02 10 OUT 1 44 1705 13 14 1720 LTAT 1741 Taa 13 48 Work Hours 10 26 ioe 4 43 8 23 aae gaT a40 5 26 Total 730 100 Fig 6 2 3 _ 83 Late rT Early Dep Remark Absence UC SOFT PRO User s Manual UC SOFT PRO User s Manual 6 3 Configuration Report Select Configuration from Reports menu Then the Configuration Report dialog box will be displayed Configuration Report Ls S S S S S S a 2 S oO S S S Fig 6 3 Choose the Configuration Report then click OK button to preview or click Exit to exit 84 UC SOFT PRO User s Manual 6 4 Viewer Tools Scroll bar 3 View Zoom Tool QI ea E Close Close 40 of 40 Tota 40 100 ig 6 5 etic Cancel Scroll bar The scroll bar can be used to browse the entire length of a page Click on the arrow to browse slowly or on the bar itself to move up or down a screen at a time First Page Use this button to view the first page of the Report Previous Page Use this button to view the page before the one currently displayed Next Page Use this button to vi
6. All Card Access All Card Transactions in the Reader will be written to the Time Attendance Database Alarm View Select the Card Transaction status to be shown on the Alarm View 29 UC SOFT PRO User s Manual Panel Ja Panel IO Panel 1 o Loop ID Loop 1 Address 01 gt Description General Header 1 Reader 2 Input Input 2 Input 3 Input 4 Input 12 Output 1 Output 2 Output 13 Output 14 Input IO Panel 1 1 01 Description W Enable for Panel Control Disable Alarm Message Auto Shunt Timezone More f Normal Close C Normal Open Debounce Time lo C Uls fe xle Pulse Time 15 w 1s Interlock Active fe ane Alarm Acton tii Horal Action a Alarm view Normal vw Alarm lw Door Ajar Cancel Fig 4 2 6 4 Input 1 Input 2 Input 3 Input 4 and Input 12 Input 5 to 11 and 13 to 16 are additional for UC 1000 panels only Default setting for UC 2000 and UC 1000 2 Input 1 Magnetic Contact Sensor of Door 1 Input 2 Magnetic Contact Sensor of Door 2 Input 3 Exit Button of Door 1 Input 4 Exit Button of Door 2 Input 12 Tamper Button of Panel Case Default setting for UC 1000 3 Input 1 Magnetic Contact Sensor of Door 1 30 UC SOFT PRO User s Manual Input 2 Magnetic Contact Sensor of Door 2 Input 5 Exit Button of Door 1 Input 6 Exit Button of Door 2 Default setting for UC 1000 4 Input 1
7. Command File dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Command File Select the Command File record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching 24 UC SOFT PRO User s Manual 4 2 6 Panel The UC 2000 UC 1000 2 UC 1000 3 or UC 1000 4 Panel of the Access Control System Up to 63 PANELs can be assigned to one 20mA LOOP Up to 31 PANELs can be assigned to one RS485 Bus Select Panel from Configuration menu under Hardware Then the main Panel dialog box will be displayed Panel i el Record 00 Close Panel ID sored By Panel ID x Search Fig 4 2 6 1 25 UC SOFT PRO User s Manual 1 Add Panel Click Add button and the detail of the Panel dialog box will be displayed Panel Panel ID Loop ID Description Panel Loop 1 Address 0 eee General Reader 1 Reader 2 Input 1 Input 2 Input 3 Input 4 Input 12 Output 1 Output 2 Output 13 Output 14 General W Active Fanel Type Timezone Grou Holiday Group Command File Ant Passback Men Trip nn H Default Timezone Group Default Holiday Group al Mone f Single C Global Single and Global Ant Passback panels can not be in the same loop W Automatically Upload Card
8. Description C Password senna We rity HENMNEE Operator Level ID Card Operator Active al Cancel Fig 4 6 2 2 Login ID Maximum 25 Characters Unique Login ID for each Operator Operator name Maximum 40 Characters Full name of the Operator Description Maximum 40 Characters Description of the Operator Password Maximum 25 Characters Login Password of the Operator Verify Maximum 25 Characters Verify the Password of the Operator Operator Level ID Operator Level of the Operator If you choose Full Access then the Operator can access all functions of UC SOFT PRO and it is un limited Invalid login attempts allowed Active Set only if the Panel is active Click OK button to confirm or click Cancel to abort 2 Edit Operator Select the Operator record which you would like to modify Click Edit button or double click the selected record then the detail of the Operator dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Operator 5632 UC SOFT PRO User s Manual Select the Operator record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted by combo box then type in the searching text for searching 64 UC SOFT PRO User s Manual 4 7 Wall Paper Select Wall Paper from Configuration menu Then the Wall Paper dialog box will be
9. which you would like to modify Click Edit button or double click the selected record then the detail of the Access Level dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Access Level Select the Access Level record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted by combo box then type in the searching text for searching 54 UC SOFT PRO User s Manual 4 5 3 Card Holder Up to 24000 CARD HOLDERs can be added to the system each CARD HOLDER should have an ACCESS LEVEL and a unique Card no from 1 to 65535 Select Card Holder from Configuration menu under Badging or Click Card button in the Main Screen Then the main Card Holder dialog box will be displayed Card Holder E Record 0 Add al Close _ Staff ID FirstName LastName Cardno _ Access Level ID Whole Word Search Sorted By Staff ID x Fig 4 5 3 1 55 UC SOFT PRO User s Manual 1 Add Card Holder Click Add button and the detail of the Card Holder dialog box will be displayed Card Holder aol staff ID BOOZ First Name is Last Name Bwna Card no 2828 OOO PIN B38 CS Access Level IO All Door 24 hr Status Active x Department Engineering a Foston Manager Z Extension EEE Note 4 m Note 5 mo Note amp m Note 7 l Note 8 m Note 3 Note 10 m Note 11 rs Note 12 _ Note 13 _ Note 1
10. Data to Panel when valid Card access in non updated Panel Site Code 1 f 5 f af af E eE E n Enn o E poo Ep OK Cancel Fig 4 2 6 2 General Panel ID Maximum 15 Characters Unique name for each Panel record Loop ID Loop which is assigned to the Panel record Address Address of the Panel It must match with the Panel Address dip switch setting in the Panel Description Maximum 40 Characters Description of the Panel record Active Set only if the Panel is active Panel Type Select the Panel type UC 2000 UC 1000 2 UC 1000 3 or UC 1000 4 for this Panel 26 UC SOFT PRO User s Manual Timezone Group Select the Timezone Group so that the Timezone under the Timezone Group can be used by the Panel Holiday Group Select the Holiday Group so that the Holiday under the Holiday Group will apply to the Panel Command File The Command File can be sent to the Panel if you upload data to the Panel Anti Passback Enable the Anti Passback function of the Panel Single and Global Anti Passback can not be in the same Loop All Global Anti Passback Panels must be in the unbuffer mode and UC SOFT PRO must be on line to perform Global Anti Passback function Men Trip for UC 2000 panels only Enable the Men Trip function of the Panel so that Door must be closed to open Door 2 by Reader 2 or Exit Button 2 Also Door 2 must be closed to open Door 1 by Reader 1 or Exit Button 1 You must use the default
11. Early Departure record and indicate if the staff is absence or not A If both from and to are blank it means Holiday B If only from is blank it means to ignore Late Arrival C If only to is blank it means to ignore Early Departure Database Choose transaction data from History Database Attendance Database or Archive Database Click OK button to preview or click Exit to exit Daily Report fre Attendance Attendance Print Date W800 Period from 2001 02 01 to 2001 02 10 Department FErngireering Date Dar Staf Marre 2001 02 01 THO Erri Wong 200 023 01 Jolm Lee 2001 02 01 Wai Man Lee 20010202 20010202 Jolm Lee 20010202 Wai Miri Lee 20010203 20010203 Jokm Lee 2001 0203 Wai Man Lee 2001 02 04 20010204 2001 02 04 2001 0205 2001 02 05 2001 02 05 2001 0206 2001 02 06 20010206 2001 02 07 200102407 i i Jokn Lee 2001 02 07 i Wai Mari Lee 2001 02 08 20010208 A Jolm Lee 2001 02 08 E Wai Mari Lee 2001702409 200102709 a pr b bl Je e S cose a Totak 730 100 Fig 6 2 2 a82 Staff Report fre Attendance Attendance Print Date Stalf ID Staff Name Department Period from Date 2001 02 01 2001 02 02 2001 02 03 2001 02 04 2001 02 05 2001 02 06 2001 02 07 2001 02 08 2001 02 09 2001 02 10 Staff ID Staf Name Department Period from a iwz pL pL cence GQ Slee Close 7300730
12. activate the internal speaker of the computer Beep sound will only OFF until all alarms have been acknowledged 69 UC SOFT PRO User s Manual 5 3 Wall Paper Select Wall Paper from Operation menu or click Wall Paper button in the main screen Then the Wall Paper will be displayed m 2 Administrator 70 UC SOFT PRO User s Manual 5 4 Panel Control Panel Control is used to communicate to Panels directly You should make use of it to upload the Hardware Timezone and Holiday to Panels after they have been changed Card Holder s data will be uploaded to Local Panels automatically after it has been changed and it will be uploaded to Dial up Remote Panels at the coming connection You can also make use of it to connect to Remote Loop manually and to directly control the Inputs and Outputs of Panels Select Panel Control from Operation menu or click Control button in the main screen Then the Panel Control dialog box will be displayed Panel Control a Loop Loop 2 Un butfer alll paneis Buen all Ganels Connect to remote site Sennett ond tremate site Upload setup to panel Unmute Euer Input Points M erunt Panel 2 02 Panel 2 03 Shunt Panel 2 04 Pole Restore toy liezone Output Paints WE eet Panel 2 0 02 Enedize Hulse Bestoe ta imezane Command File Send o Enit Fig 5 4 1 Loop Select the Loop
13. displayed Wallpaper Piel X C None C Default User CAWINDOWS Setupbmp Ac h Setup bmp E WINDOWS _ All Users Triangles bmp _ Application Data Waves bmp Fig 4 7 Choose None to remove the Wall Paper from the main screen of UC SOFT PRO choose Default to display Unicorn Computers Wall Paper or choose User such that you can select your own Wall Paper The Wall Paper must be in BMP or JPG format Click OK button to confirm or click Exit to exit the Wall Paper dialog box 65 UC SOFT PRO User s Manual 5 0 Operation Operation includes Event View Alarm View Wall Paper Panel Control and Database Maintenance 66 UC SOFT PRO User s Manual 5 1 Event View Up to 10000 transaction records can be shown on the Event View It will be cleared if you exit UC SOFT PRO Select Event View from Operation menu or click Event button in the main screen Then the Event View will be displayed UC SOFT Non registered Yersion Logm Configuration Operation Reports Licence About lt 2 S Bj amp a Login Logout Exit Canl Event dlam Wall Paper Control Freeze z00lr0zrz8 18 09 00 NOT FOUND CAPD 02829 at Main Door Panel 1 2001 02 28 18 09 00 Input Foint Fanel 1 I 01 at Panel 1 NORMAL 2001 02 25 18 09 00 Input Point Panel 1 I 01 at Fanel 1 ALARM z00lr0zrz8 15 08 00 VALID CARD 02825 Iris Wong at Main Door Fanel 1 Sosse OOOO S O O Fi
14. double click the selected record then the detail of the _A UC SOFT PRO User s Manual Schedule dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Schedule Select the Scheduled record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching LAY x UC SOFT PRO User s Manual 4 3 Timezone Timezone of the Access Control System One Timezone consists of one or more than one Timezone slot Maximum of 63 Timezone slots are allowed in one Timezone Group Select Timezone from Configuration menu Then the main Timezone dialog box will be displayed Timezone i el Timezone 5 POUp C Detault Timezone Gro Lp Upload Timezone to all Panels Record 1 1 Edit Delete Close TimezonelD Description 24 hr sored By Timezone ID Search Fig 4 3 1 Select Timezone Group ID that you would like to add Timezone _ 43 UC SOFT PRO User s Manual 1 Add Timezone Click Add button and the detail of the Timezone dialog box will be displayed Timezone Oo Timezone I Office hr Description fC Timezone Slot Start Time End Time Mon Tue Wed Thu Fi Sat Sun Hol 0300 1800 v a 0900 1300 v Edit Delete UF Cancel Fig 4 3 2 Timezone ID Maximum 25 Characters Unique n
15. read on Reader 1 2 It is used as Valid Card feedback signal for Reader 1 and Reader 2 respectively You may disable it when you would like to use it for the other purpose such as Door False Open Toggle Output status when it is pulse Change the Output status 1 e OFF gt ON or ON OFF if the Output has been pulsed Pulse Time Pulse Time of the Output x 0 1 s for UC 2000 panels only Pulse time can be set from 0 to 6 3 seconds with increment of 0 1 second x 1 s Pulse time can be set from 0 to 63 seconds with increment of 1 second Interlock to trigger another Input or Output if the Output has been triggered There are five types of Interlock Action 1 No Action take no action 2 Shunt Energize Shunt or Energize to the other Input or Output 3 Un shunt De energize Un shunt or De energize to the other Input or Output 4 Pulse Pulse to the other Input or Output 5 Follow Same triggering method to the other Input or Output as itself Click OK button to confirm or click Cancel to abort Edit Panel Select the Panel record which you would like to modify Click Edit button or double click the selected record then the detail of the Panel dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort Delete Panel Select the Panel record which you would like to delete Click Delete button Searching Select the record field from the
16. remote Port only This string must be added to the Modem profile of the Modem at Computer side and Panel side Active Set only if the Port is active Click OK button to confirm or click Cancel to abort 2 Edit Port Select the Port record which you would like to modify Click Edit button or double click the selected record then the detail of the Port dialog box will be displayed ee UC SOFT PRO User s Manual Click OK button to confirm the modification or click Cancel to abort 3 Delete Port Select the Port record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted by combo box then type in the searching text for searching _14 UC SOFT PRO User s Manual 4 2 2 Loop Communication Loops of the Access Control System One local Loop will be assigned to one Port but unlimited dial up remote Loops can be assigned to one Port Select Loop from Configuration menu under Hardware Then the main Loop dialog box will be displayed Loop fa 3E Recod0 d Add Clo toop ID Description Port ID Remote Phone no JACK NCK sored By Loop ID x Search Fig 4 2 2 1 15 UC SOFT PRO User s Manual 1 Add Loop Click Add button and the detail of the Loop dialog box will be displayed Local Part 1 E O 2Urme ACK ACE Fig 4 2 2 2 Loop ID Maximum 25 Characters Unique name for each Loop record Descript
17. that you would like to operate Unbuffer all Panels All Panels in the Loop will be unbuffered 1 e All Panels 71 UC SOFT PRO User s Manual will send back the transactions stored in their memories and send back the coming transactions in real time Buffer all Panels All Panels in the Loop will be buffered 1 e All Panels will keep all coming transactions in their internal memories Connect to remote site This button will be visible if the selected Loop is a Remote Loop Click this button to connect to Remote Loop manually Disconnect from remote site This button will be visible if the selected Loop is a Remote Loop Click this button to disconnect from Remote Loop manually Panel Select the Panel that you would like to operate Upload setup to Panel Upload setup to Panel dialog box will be displayed Select the item s that you would like to upload or click Select All button to select all items Normally Card data will be uploaded automatically after they have been changed But if you would like to upload them manually you should select all items to upload otherwise it will only add or update the Card in the UC SOFT PRO Database and will not remove the Card that is in the Panel memory but not in the UC SOFT PRO Database Bere UC SOFT PRO User s Manual Upload setup to panel Piel ES Date amp Time l Timezones l Holidays Readers M Input Points Output Points l
18. which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type 1n the searching text for searching 6 Upload Holiday to all Panels Click this button to upload Holiday setup to all panels if you want to refresh the Holiday setup stored in the panels 48 UC SOFT PRO User s Manual 4 5 Badging It includes NOTE FIELD SETUP ACCESS LEVEL SETUP and CARD HOLDER INFORMATION of the system Both the installer and the end user should be familiar with this section _ AQ UC SOFT PRO User s Manual 4 5 1 Note Field You may make use of this NOTE FILES SETUP to predefine the CARD HOLDER s general information so that you can input CARD HOLDER INFORMATION quickly Select Note Field from Configuration menu under Badging Then the main Note Field dialog box will be displayed Note Field iil Es Mote 1 Department TextBox Drop Down List Engineering ddd iter Delete tem Note 2 Position C TextBox DropDownList Engines m Additem Delete item Note 3 Extension f TextBox Drop Down List o H Add item Delete tem Mote 4 Note 4 TextBox C DropDownList Oe Add item Delete tem Note 5 Note 5 TextBox C DropDownList f Additern Delete item Note 6 Note 6 TextBox DropDownList Add item Delete ten Note 7 Note 7 amp TextBox Drop Down List Oo Add item Delete ten Note Note 8 TextBox C DropDownList f Additer
19. 1 6 3 Configuration 84 6 4 Viewer Tools 85 6 5 Exporting the Report 86 Appendix Examples for Quick Setup Procedure UC SOFT PRO User s Manual 1 0 Introduction The Unicorn Computers UC SOFT PRO is a 32 bit full featured access control software operating in Windows 95 Windows 98 Windows NT 4 0 Windows 2000 Windows ME and Windows XP It provides access control alarm monitoring and basic time attendance solution at an economical price UC SOFT PRO provides a user friendly user interface to set up and operate the access control system so that it requires a minimal time for the installer and the end user to learn and to use the software UC SOFT PRO takes the full advantage of the flexibility of the Unicorn Computers UC 2000 and UC 1000 controller It can support up to eight communication Ports up to 504 controllers with direct connection and up to 504 controllers with dial up connection UC SOFT PRO User s Manual 2 0 System Requirements Hardware UC 2000 UC 1000 2 UC 1000 3 or UC 1000 4 Access Control Panel UC 100 RS232 to 20mA Loop Communication Converter or RS485PCI RS485API RS232 to RS485 Communication Converter for RS485 Bus HID Wiegand Proximity Card Reader or compatible HID Wiegand Proximity Card or compatible Computer 733Mhz Processor 128 MB RAM 1 GB Free Hard Drive Space 2 Serial Communication Ports CD ROM Drive 800x600 SVGA Display Keyboard Mouse or higher configuration Operatin
20. 4 _ Note 1 ef Fig 4 5 3 2 Staff ID Maximum 25 Characters Unique ID for each Card Holder s record First Name Maximum 40 Characters First Name of the Card Holder Last Name Maximum 40 Characters Last Name of the Card Holder Card no 1 to 65535 Card no of the Card Holder PIN 1 to 65535 PIN of the Card Holder Access Level ID Access Level of the Card Holder 56 UC SOFT PRO User s Manual Status Status of the Card Holder You may select Active In active and Lost or Stolen Only Active can be allowed to access doors in the Access Level Note Field Maximum 40 Characters for each Note Field The Card Holder s personal data The first three Note Fields could be used as the filtering index in the History Report and Attendance Report Click OK button to confirm or click Cancel to abort Edit Card Holder Select the Card Holder s record which you would like to modify Click Edit button or double click the selected record then the detail of the Card Holder dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort Delete Card Holder Select the Card Holder s record which you would like to delete Click Delete button Searching Select the record field from the Sorted by combo box and type in the searching text for searching Click Search button if you enable the Whole Word Search option 57
21. 40 Characters Description of the Reader record Enable for Access Level So that the Reader can be available for the Access Level setup Pulse Output 1 2 3 4 for UC 1000 4 only when Valid Card read Choose Output that to be pulsed when valid Card read on the Reader Keypad Enabled Keypad Option so that Pin and Card and Pin or Card function can be available Pin and Card You should choose one Timezone in the Timezone for Pin _ 28 UC SOFT PRO User s Manual entry combo box If it is None Pin is not required For UC 1000 panels the Timezone of Reader 1 and Reader 2 must be the same 1f Pin and Card is applied to both Reader and Reader 2 Pin or Card for UC 2000 panels only Either show Card on the Reader or Key in the Card no in the Keypad can access the door operation Two Men Rule for UC 2000 panels only It requires two different valid Cards to be shown on the Reader within 5 seconds in order to open door The first valid Card shown on the Reader is defined as Anti Passback Time Attendance Database Write Card Transactions to another Database besides History Database so that you can make use of this as a Backup Database for Card Transaction only and provide a smaller Card Database which have Card Transaction only for the specific Reader for Time Attendance purpose Valid Card only Only Valid Card Transaction will be written to the Time Attendance Database
22. Command Files M Card Data Select All Upload Now Cancel Fig 5 4 2 Click Upload Now button to upload or click Cancel to abort Unbuffer The selected Panel will be unbuffered 1 e The Panel will send back the transactions stored in its memory and will send back the coming transactions in real time Buffer The selected Panel will be buffered 1 c The Panel will store all coming transactions in its internal memory Input Points Select the Input that you would like to operate Un shunt Un shunt the selected Input Point of selected Panel 1 e the Input Point can monitor its status Shunt Shunt the selected Input Point of selected Panel i e the Input Point has been by passed Pulse The selected Input Point will be by passed for a specific Pulse Time period 73 UC SOFT PRO User s Manual Restore to Timezone The Input Point will be recovered to Un shunt or Shunt as its Auto Shunt Timezone setup Output Points Select the Output that you would like to operate De energize De energize the selected Output Point of selected Panel 1 e the Output Point will be OFF Energize Energize the selected Output Point of selected Panel 1 e the Output Point will be ON Pulse The selected Output Point will be ON for a specific Pulse Time period Restore to Timezone The Output Point will be recovered to ON or OFF as its Auto ON Timezone setup Command File Select the Comman
23. Control System One local LOOP will be assigned to one PORT but unlimited dial up remote LOOPs can be assigned to one PORT PANEL The UC 2000 UC 1000 2 UC 1000 3 or UC 1000 4 Panel of the Access Control System Up to 63 PANELs can be assigned to one 20mA LOOP and up to 31 PANELs can be assigned to one RS485 BUS Badging It includes NOTE FIELD SETUP ACCESS LEVEL SETUP and CARD HOLDER INFORMATION of the system Both the installer and the end user should be familiar with this section NOTE FIELD You may make use of this NOTE FIELD SETUP to predefine the CARD HOLDER s general information so that you can input CARD HOLDER INFORMATION quickly ACCESS LEVEL It is a predefined level to determine where and when a CARD HOLDER 1s valid in the system Basically unlimited ACCESS LEVEL can be added UC SOFT PRO User s Manual CARD HOLDER Up to 24000 CARD HOLDERs can be added to the system each CARD HOLDER should have an ACCESS LEVEL and a unique Card no from 1 to 65535 Operator It includes OPERATOR LEVEL SETUP and OPERATOR INFORMATION Both the installer and the end user should be familiar with this section OPERATOR LEVEL It 1s a predefined level to determine which function of the UC SOFT PRO can be accessed by the OPERATOR OPERATOR Each OPERATOR should have an OPERATOR LEVEL Basically unlimited OPERATORs can be added to the system 10 UC SOFT PRO User s Manual 4 2 Hardware It includes the hardware setu
24. L can be added Select Access Level from Configuration menu under Badging Then the main Access Level dialog box will be displayed Access Level al e Record 0 0 Close lAccess Level ID Description Somted By Access Level ID x Search Fig 4 5 2 1 5 UC SOFT PRO User s Manual 1 Add Access Level Click Add button and the detail of the Access Level dialog box will be displayed Access Level of Access Level ID A Door z4 C C U O CNNNNC C Description Avaliable Entrance selected Entrance __ Panel 1D Reader ID Fanel 1 Computer Room 24 hr Panel BE Fanel 1 Main Door 24 hr Parel Reader Remove Timezone 24 hr OF Cancel Fig 4 5 2 2 Access Level ID Maximum 25 Characters Unique name for each Access Level record Description Maximum 40 Characters Description of the Access Level record Available Entrance Select Panel Reader and Timezone then click Add button to allow the Card Holder with this Access Level to access the entrance in the Timezone period Selected Entrance The entrances that are available will be shown on the Select Entrance list Select the entrance record and click Remove button will remove the entrance from the list Click OK button to confirm or click Cancel to abort _53 UC SOFT PRO User s Manual 2 Edit Access Level Select the Access Level record
25. Panel wiring when you are using this function Automatically Upload Card Data to Panel when valid Card access in non updated Panel Enable this function will let the UC SOFT PRO to upload Card data to Panel automatically if the status of the Card Transaction sent to UC SOFT PRO is Not Found Card but it is valid in the UC SOFT PRO Card Database Site Code Up to 16 Site Codes are allowed for UC 2000 panels and up to 8 Site Codes are allowed for UC 1000 panels to be added to each Panel and the Site Code range should be from 1 to 65535 nD pe UC SOFT PRO User s Manual Panel Ja Panel IL Panel 1 OO Loop ID Loop 1 Address 01 gt Description General Feader 1 Reader 2 Input 1 Input 2 Input 3 Input 4 Input 12 Output 1 Output 2 Output 13 Output 14 Reader ID Panel 1 R 01 Description Ww Enable for Access Level f Pulse Output 1 when Valid Card read C Pulse Output 2 when Valid Card read E ore f Pin and Card Timezone for Pin entry More f Pin or Card l Teo Men Aule Time tendance Database W Add record to Time Attendance Database C Valid Card only f All Card Access Alarm view Yalid Card W Mot Found Card Ii Timezone violation We FIN violation W Site Code violation W Ant passback violation Cancel Fig 4 2 6 3 Reader 1 and Reader 2 Reader 3 and Reader 4 are for UC 1000 4 only Reader ID Maximum 25 Characters Unique name for each Reader record Description Maximum
26. UC SOFT PRO Access Control Software User s Manual Unicorn Computers Technology Limited Copyright 2003 Unicorn Computers Technology Limited All rights reserved UC SOFT PRO User s Manual Contents 1 0 IMULOGUCTION cosaccacsiesdioneussesttotess dusscercewtatevutenensadeomavencsslode 4 20 System Reguire ments sixes veciic cena reinn saan Ea EEE 5 3 0 Quick Start sicsssasicdsdsiecsiwiewsecedesveicisseshasnnseserseesiees e ine 6 3 1 Installation of UC SOFT PRO 6 3 2 Conversion of UC SOFT PRO from English to other languages 6 3 3 Opening UC SOFT PRO 6 3 4 First Login Logout and Exit UC SOFT PRO 7 3 5 Registration of UC SOFT PRO 8 AAV ONMGUTALIONS cisavcccnescaaeidtwescuantandeneasuseneesstensmiewaieaveneseeass 9 4 1 Tips 9 4 2 Hardware 1 4 2 1 Port 12 4 2 2 Loop 15 4 2 3 Timezone Group 18 4 2 4 Holiday Group 20 4 2 5 Command File 22 4 2 6 Panel 25 4 2 7 Additional Input and Output Points 37 4 2 8 Schedule 37 4 3 Timezone 43 4 4 Holiday 46 4 5 Badging 49 4 5 1 Note Field 50 4 5 2 Access Level 52 4 5 3 Card Holder 55 4 6 Operator 58 4 6 1 Operator Level 59 4 6 2 Operator 62 4 7 Wall Paper 65 UC SOFT PRO User s Manual SU COMCE AMON garstonuacocucuscesasueoesacdesrannaeenssauran shears soumesasasuaenes 66 5 1 Event View 67 5 2 Alarm View 68 5 3 Wall Paper 70 5 4 Panel Control 71 5 5 Database Maintenance 75 OO REDONIS icse vistas adaisvarsewecacusesademeuavdietendetdesed E E 78 6 1 History 79 6 2 Attendance 8
27. UC SOFT PRO User s Manual 6 2 Attendance Report Select Attendance from Reports menu Then the Attendance Report dialog box will be displayed Attendance Report Me Report Period femm cc from 2002 01 01 to 2002 00 428 Report Type c Daily Report Staff Report Stafi Staff ID P c Note Field Note 1 oo Nate 2 Fal Nate 3 Office Hour hh mm Mon to Fri from 09 00 to 17 00 Sat from 09 0 to 13 00 Sun from to Database History Database f Attendance Database Pa Fig 6 2 1 There are five types of record selection criteria for the Attendance Report Report Period yyyy mm dd Select the period of the transaction records Report Types There are three types of Attendance Reports They are Daily Report Staff Report and User Report Daily Report Sorted by Department then Date It is suitable for getting the attendance report of all staffs in a specific date Staff Report Sorted by Department then Staff It is suitable for getting the attendance report of each staff in a specific period of date 81 UC SOFT PRO User s Manual User Report An additional Customized Report Staff Select Staff ID or select Note Field of the staff that you would like to print for the Card Transactions BLANK stands for all Office Hour hh mm Key in the Office Hour so that the Attendance Report can list down Late Arrival
28. W Alarm W Door Ajar OL W Normal lf Others Operator Transactions System Transactions stat Staff ib Y C Mote Field Mote 1 Mote 2 Mote 3 Locations Loop Reader Fanel Input Database f History Database Attendance Database Js Fig 6 1 1 There are five types of record selection criteria for the History Report Report Period yyyy mm dd hh mm Select the period of the transaction records Transaction Types There are four types of transaction They are Card Transaction Point Transactions Operator Transactions and System Transactions You may select the transaction types and select the status of the transactions that you would like to print Staff Select Staff ID or select Note Field of the staff that the Card 79 History Print Date PIPAN Date Time 2001 02 28 15 04 00 S001 228 18 04 00 2001 0228 15 08 00 UC SOFT PRO User s Manual Transactions you would like to print BLANK stands for all Locations Select Loop Panel and Reader for Card Transactions or select Loop Panel Input for Point Transactions BLANK stands for all Database Choose transaction data from History Database Attendance Database or Archive Database Click OK button to preview or click Exit to exit Staff ID Operator ID Boo Boy Boo i 4 iad o gt cares 8 cosel 308129 Totak129 100 Fig 6 1 2 80
29. ame for each Timezone record Description Maximum 40 Characters Description of the Timezone _ 44 UC SOFT PRO User s Manual Click Add button to add Timezone Slot to Timezone Timezone a Gy Start Time hhmn osoo End Time hhmm fiso0 Mon fw Tue W Wed M Thu fw Fi sw Sat T in Hol p Cancel Fig 4 3 3 Click Edit button to edit the selected Timezone Slot in Timezone Click Delete button to delete the Timezone Slot in Timezone Click OK button to confirm or click Cancel to abort 2 Edit Timezone Select the Timezone record which you would like to modify Click Edit button or double click the selected record then the detail of the Timezone dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Timezone Select the Timezone record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching 5 Upload Timezone to all Panels Click this button to upload Timezone setup to all panels if you want to refresh the Timezone setup stored in the panels _45 UC SOFT PRO User s Manual 4 4 Holiday Holiday of the Access Control System Each Panel can hold up to 32 Holidays UC SOFT PRO will send the coming 32 Holidays to Panel when you upload holidays to the Panel Select Holiday from Configuration menu Then the main Holiday dialog box w
30. chedule Click Add button and the detail of the Schedule dialog box will be displayed Schedule Schedule ID Description Ee Es Date tyyvymmadd 20020602 Time harm Type Period ooo Date amp Time Update Every D ay OF Cancel Fig 4 2 8 2 Date amp Time update Schedule ID Maximum 25 Characters Unique name for each Command File record Description Maximum 40 Characters Description of the Command File Date yyyymmdd Coming Scheduled Date It will be updated automatically to the next Scheduled Date when the Scheduled Update 1s completed Time hhmm Coming Scheduled Time Period You may choose Never Once Every Day Every Week Every Two Week and Every Four Week 39 UC SOFT PRO User s Manual Schedule fz Schedule D Auto Dial up A57 Description Auto Dial up to Remote Site 1 Date hvyaymmedd zoomom Time hhmm jooo oo Type Auto Dialup Period Even Day tsi Loop ID Loop 0 H W Send Date amp Time M Send Undated Data to Panels W Collect Transaction Data fram Panels Cancel Fig 4 2 8 3 Auto Dial up Schedule ID Maximum 25 Characters Unique name for each Command File record Description Maximum 40 Characters Description of the Command File Date yyyymmdd Coming Scheduled Date It will be updated automatically to the next Scheduled Date when the Scheduled Update is
31. completed Time hhmm Coming Scheduled Time Period You may choose Never Once Every Day Every Week Every Two Week and Every Four Week Loop ID Remote Loop ID Send Date amp Time Send Date and Time when connected to remote Loop Send Updated Card Data Send updated Card data when connected to remote Loop Collect Transaction Data from Panels Collect the transaction data of the remote Loop when collected _ 40 UC SOFT PRO User s Manual Schedule Schedule IB Send Command sststsS Description EEE Date hvyaymmedd 20020101 Time hhmm fos00 Type Send Command File E aiek N Command File Disable Two Men Rule T Cancel Fig 4 2 8 4 Send Command File Schedule ID Maximum 25 Characters Unique name for each Command File record Description Maximum 40 Characters Description of the Command File Date yyyymmdd Coming Scheduled Date It will be updated automatically to the next Scheduled Date when the Scheduled Update 1s completed Time hhmm Coming Scheduled Time Period You may choose Never Once Every Day Every Week Every Two Week and Every Four Week Command File Command File will be sent at the coming Scheduled Date Time Click OK button to confirm or click Cancel to abort 2 Edit Schedule Select the Scheduled record which you would like to modify Click Edit button or
32. d File that you would like to send then click the Send button _74 UC SOFT PRO User s Manual 5 5 Database Maintenance Database Maintenance is used to Backup All Database Restore All Database Archive Transaction Database and Purge Transaction Database The UC SOFT PRO will be closed for this operation Select Database Maintenance from Operation menu Then the UC SOFT PRO DB Manager Login dialog box will be displayed UC SOFT DEB Manager Me E Operator admin Password OF Cancel Fig 5 5 1 Operator ID and Password are required to login for the UC SOFT PRO DB Manager Enter the Operator ID and the Password and then click OK or press Enter button on the Keyboard to confirm Click Cancel to abort the login 2958 UC SOFT PRO User s Manual UC SOFT DB Manager Mie FS f Backup All Database C Restore All Database Archive History Database before yyyy mm dd 2002701 01 C Purge History Database before yyyy mmdd 2002701 r0 C Archive Attendance Database before yyyy mm dd 2002701 r0 C Purge Attendance Database before pyyp mmdd 2002 0 r0 Fig 5 5 2 Backup All Database All Database will be copied to the Backup directory under UC SOFT PRO application directory Restore All Database All Backup Database will be restored and it will override the existing Database It is only for emergency case that the current Database is damaged All data changed after the last backup will be lo
33. els directly so that it can override the standard setup in the user interface to provide special functions Select Command File from Configuration menu under Hardware Then the main Command File dialog box will be displayed Record 0 0 Add Close Command File ID sored By Command File ID earch Fig 4 2 5 1 s27 a UC SOFT PRO User s Manual 1 Add Command File Click Add button and the detail of the Command File dialog box will be displayed Command File Command File G Digable Two Men Rule Description Disable Panel 1 Two Men Rule Function Loop ID T Command List Command S M 01 G 1 M 01 2 Edit Delete UF Cancel Fig 4 2 5 2 Command File ID Maximum 25 Characters Unique name for each Command File record Description Maximum 40 Characters Description of the Command File Loop ID Loop which is assigned to the Command File record 3936 UC SOFT PRO User s Manual Click Add button to add Command to Command list Command File mfe Command M 01 Q 2 OF Cancel Fig 4 2 5 3 Click Edit button to edit the selected Command in Command list Click Delete button to delete the selected Command in Command list Click OK button to confirm or click Cancel to abort 2 Edit Command File Select the Command File record which you would like to modify Click Edit button or double click the selected record then the detail of the
34. ew the page after the one currently displayed Last Page Use this button to view the last page of the Report Cancel Use this button to cancel the requested Report 3 View Zoom Tool Use this button to move between three different views One view shows the page at 100 another view that fits the entire page in the viewing window and the last view that fits the page in the window from side to side Print Use this button to print the Report 2h 5 4 UC SOFT PRO User s Manual 6 5 Exporting the Report UC SOFT PRO allows the export of Report information to various file types Click either of the two buttons shown to bring up the Export dialog box Destination Cancel Fig 6 5 Format Select the type of file that you want to export from the drop down list A number of data word processing and spreadsheet formats are available Some selection may request additional information before exporting the data Destination In some cases you will probably want to export the data to a file on your own computer If so select Disk File from the Destination drop down list and you will be prompted to navigate the directory you want the file to be put in 86
35. g 5 1 Click Freeze button will freeze the Event View for two minutes and click Live button will recover the Event View 67 UC SOFT PRO User s Manual 5 2 Alarm View Alarm transactions which you have defined in the Panel will be displayed on the Alarm View Up to 10000 alarm records can be shown on the Un acknowledged Alarms View and Acknowledge Alarms View It will be cleared if you exit UC SOFT PRO Select Alarm View from Operation menu or click Alarm button in the main screen Then the Alarm View will be displayed UC SOFT Non registered Yersion Logm Configuration Operation Reports Licence About O 8 of a amp F Losin Logout Exit Canl Event dlam Wall Paper Control Clear Speaker OFF Ur acknowledged Alarms 2001 02 28 18 09 00 NOT FOUND CARD 02829 at Main Door Panel 1 Acknowledged Alarms 2001 02 28 18 09 00 Input Point Panel 1 I Ol at Panel 1 ALAPM ack at 2 28 2001 PM 06 10 58 paneer Fig 5 2 Select records from the Un acknowledged Alarms then click Acknowledge button to acknowledge the Alarms Select records from the Acknowledged Alarms then click Clear button to clear the acknowledged Alarms You may hold the Shift key and select the start and finish for consecutive selection or hold the Ctrl 68 UC SOFT PRO User s Manual key for non consecutive selection Click Speaker OFF button to
36. g System Windows 95 Windows 98 Windows NT 4 0 Windows 2000 Windows ME or Windows XP UC SOFT PRO User s Manual 3 0 Quick Start 3 1 Installation of UC SOFT PRO 1 Insert the UC SOFT PRO CD disk into your CD ROM drive 2 From the Start button select Run from the main menu 3 Type D SETUP in the open text box Where D is your CD ROM drive Click OK to continue 4 AUC SOFT PRO installation screen will be displayed Click OK to continue Click Exit Setup to abort the installation 5 Click the Installation Icon to start the installation or click the Change Directory button to change the directory or click the Exit Setup to abort the installation J UC SOFT Access Control System Setup p Welcome to the UC SOFT Access Control System installation program Setup cannot install system files or update shared Files if they are in use Before proceeding we recommend that you clase any applications you may be running Exit Setup Fig 3 1 3 2 Conversion of UC SOFT PRO from English to other languages Copy the file Translat txt from the corresponding language folder of the UC SOFT PRO installation disk to UC SOFT PRO installation directory c program files uc soft if your required language is available from the installation disk Otherwise you can modify the file Translat txt for your language before copy to the installation directory 3 3 Opening UC SOFT PRO From the Start button select Programs Unico
37. ill be displayed Ee Es H ollday G roup IC Default Holiday Group Upload Holiday to all Panels Record 0 0 Add Close Holiday ID Description ear Month Day Active E ee ee ee Holiday Sorted By Holiday ID Search Fig 4 4 1 Select Holiday Group ID that you would like to add Holiday _ A6 UC SOFT PRO User s Manual 1 Add Holiday Click Add button and the detail of the Holiday dialog box will be displayed Holiday fei Holiday ID xmas a Description Apply to all years Iw Year Wary fo Month trim h2 o Day fdd 5 Active lw Cancel Fig 4 4 2 Holiday ID Maximum 25 Characters Unique name for each Holiday record Description Maximum 40 Characters Description of the Holiday Apply to all years Select only if it applies to all years Year yyyy Year of the Holiday It will be disabled if you enable Apply to all years Month mm Month of the Holiday Day dd Day of the Holiday Active Set only if the Holiday is active Click OK button to confirm or click Cancel to abort 2 Edit Holiday Select the Holiday record which you would like to modify Click Edit button or double click the selected record then the detail of the Holiday dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort a UC SOFT PRO User s Manual 3 Delete Holiday Select the Holiday record
38. ion Maximum 40 Characters Description of the Loop record Port ID Port which is assigned to the Loop record Remote It is used to indicate the Port you have selected as a dial up remote Port Phone no for dial up remote Loop only Remote phone number of the Site Type 20mA Using 20mA Loop 20mA ACK NCK for UC 2000 panels only Using 20mA Loop with acknowledge function RS485 Using RS485 RS485 ACK NCK not for dial up remote site Using RS485 with acknowledge function Active Set only if the Loop is active Click OK button to confirm or click Cancel to abort 16 UC SOFT PRO User s Manual 2 Edit Loop Select the Loop record which you would like to modify Click Edit button or double click the selected record then the detail of the Loop dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Loop Select the Loop record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching By ir UC SOFT PRO User s Manual 4 2 3 Timezone Group At least one Timezone Group should be added for a system and you should assign one Timezone Group for each Panel so that you can assign Timezone to Access Level Select Timezone Group from Configuration menu under Hardware Then the main Timezone Group dialog box will be displayed Timezone Gr
39. n Delete item Note 9 Note 9 TextBox DropDownList oO Add item Delete tem Note 10 Note 10 TextBox C DropDownList Oe Add item Delete tem Note 11 Note 11 TextBox C DropDownList Additern Delete item Note 12 Note 12 TextBox C DropDownList Add item Delete tem Mote 13 Note 13 TextBox DropDownList z Additem Delete iter Note 14 Note 14 TextBox DropDownList gt Additem Delete tem Note 15 Note 15 TextBox DropDownList Add item Delete tem Fig 4 5 1 1 Cancel Note Field Name Maximum 40 Characters Note Field Name will show up on the detail of the Card Holder dialog box Note 1 has been predefined as Department Text Box It will provide a text box in the detail of the Card Holder dialog box 50 UC SOFT PRO User s Manual for the Note Field if you select this option Drop Down List It will provide a drop down list box in the detail of the Card Holder dialog box for the Note Field if you select this option You may make use of the Add item button and Delete item button to add or to delete the item in the drop down list Note Field Drop Down List ltem Engineer Add Cancel Fig 4 5 1 2 Click OK button to confirm or click Cancel to abort 5 UC SOFT PRO User s Manual 4 5 2 Access Level It is a predefined level to determine where and when a CARD HOLDER is valid in the system Basically unlimited ACCESS LEVE
40. n menu under Hardware Then the main Holiday Group dialog box will be displayed Holiday Group al e Record 1 1 Add Edit Delete Close aa Holiday Group ID Pesciption Default Holiday Group Sorted By Holiday Group ID Search Fig 4 2 4 1 20 UC SOFT PRO User s Manual 1 Add Holiday Group Click Add button and the detail of the Holiday Group dialog box will be displayed Holiday Group ei Holiday Group ID Default Holiday Group Description OF Cancel Fig 4 2 4 2 Holiday Group ID Maximum 25 Characters Unique name for each Holiday Group record Description Maximum 40 Characters Description of the Holiday Group record Click OK button to confirm or click Cancel to abort 2 Edit Holiday Group Select the Holiday Group record which you would like to modify Click Edit button or double click the selected record then the detail of the Holiday Group dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Holiday Group Select the Holiday Group record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching _2 UC SOFT PRO User s Manual 4 2 5 Command File During normal operation there are no setup requirements for the Command File Using Command File UC SOFT PRO can communicate with Pan
41. oup el Record 1 1 Add Edit Delete Close Ba Timezone Group ID jD escription Default Timezone Group Somted By Timezone Group ID x earch Fig 4 2 3 1 18 UC SOFT PRO User s Manual 1 Add Timezone Group Click Add button and the detail of the Timezone Group dialog box will be displayed Timezone Group fei Timezone aroun ID Default Timezone Group Description OF Cancel Fig 4 2 3 2 Timezone Group ID Maximum 25 Characters Unique name for each Timezone Group record Description Maximum 40 Characters Description of the Timezone Group record Click OK button to confirm or click Cancel to abort 2 Edit Timezone Group Select the Timezone Group record which you would like to modify Click Edit button or double click the selected record then the detail of the Timezone Group dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort 3 Delete Timezone Group Select the Timezone Group record which you would like to delete Click Delete button 4 Searching Select the record field from the Sorted By combo box then type in the searching text for searching 19 UC SOFT PRO User s Manual 4 2 4 Holiday Group At least one Holiday Group should be added for a system and you should assign one Holiday Group for each Panel if Holiday is required to be considered in the Access Level Select Holiday Group from Configuratio
42. our Installer to get your Register Number within 30 days after thie software has been installed otherwise this software will expire Registered Number Type in the Registered Number get from your Installer then click this button to register this software Exit Fig 3 5 Type in the Registered Name Your Company Name and the S N of UC SOFT PRO Then click the Type in the Registered Name button and a Registered Code will be displayed Send the Registered Name S N and Registered Code to your Installer to get the Registered Number Then type in the Registered Number and click the Type in Registered Number button to register UC SOFT PRO UC SOFT PRO User s Manual 4 0 Configurations 4 1 Tips Q What is the proper setup procedure to set up UC SOFT PRO A Basically the setup could be divided into three sections Hardware Badging and Operator and it can be easily set up by the following sequence 1 Hardware Port Loop Panel Timezone Holiday Schedule 2 Badging Note Field Access Level gt Card Holder 3 Operator Operator Level gt Operator Hardware It includes the hardware setup of the system Normally the installer should be familiar with this section and it is not necessary for the end user to learn PORT COM Ports of the system computer used for the Access Control System UC SOFT PRO can support up to 8 COM Ports LOOP Communication Loops of the Access
43. p of the system Normally the installer should be familiar with this section and it is not necessary for the end user to learn 11 UC SOFT PRO User s Manual 4 2 1Port COM Ports of the system computer used for the Access Control System UC SOFT PRO can support up to 8 COM Ports Select Port from Configuration menu under Hardware Then the main Port dialog box will be displayed Port al e Record 0 0 Add al Close PotD reee eseription ICOM Baud Rate Remote Active sored By Port ID Search Fig 4 2 1 1 gt UC SOFT PRO User s Manual 1 Add Port Click Add button and the detail of the Port dialog box will be displayed Port fei Part IO Local Fort 1 Description COM Port i Baud Rate 4800 Remote E Modem Init String Eog OVORCT BOOS 0 7 ek Oe Active Jw Fig 4 2 1 2 Port ID Maximum 25 Characters Unique name for each Port record Description Maximum 40 Characters Description of the Port record COM Port COM Port no which is assigned to the Port record Baud Rate 1200bps 2400bps 4800bps or 9600bps Baud Rate of the COM Port Normally 4800bps is used for local Port and 9600bps for dial up remote Port You must make sure the baud rate dip switch setting in the Panel matches with the Port Baud Rate setup Remote Select only if it is a dial up remote Port Modem Init String EQQO0VO amp C1 amp DO0S0O 1 amp K0 amp WO For dial up
44. rn Computers and then UC SOFT Access Control System icon UC SOFT PRO User s Manual 3 4 First Login Select Login from the Login menu or click Login button Then the Login dialog box will be displayed Operator ID and Password are required to login for program execution Enter the Operator ID and the Password and then click OK or press Enter button on the Keyboard to confirm Click Cancel to abort the login If you tick the check box Collect Data from Panel s then UC SOFT PRO will collect all Card Transactions and Point Transactions from all local Panels and set the Panels into an Unbuffer Mode so that UC SOFT PRO can monitor the Card and Point Transactions in real time The factory programmed Operator ID is admin and no passwords are required for initial login but you should add password in order to insure the security Login fei Operator admin Password i Collect Data from Panelis Cancel Fig 3 4 Logout Select Logout from the Login menu or click Logout button Exit UC SOFT PRO Select Exit from the Login menu or click Exit button UC SOFT PRO User s Manual 3 5 Registration of UC SOFT PRO Click License from the UC SOFT PRO main menu Then the License dialog box will be displayed Registration fei Registered Name S M Type in the Registered Name and S N then click this button to get your Registered Code Registered Code Send the Registered Mame 57M and Registered Code to p
45. st and you may require to upload all setups to all Panels so that UC SOFT PRO Database can synchronize with the Panels memories Archive History Database before yyyy mm dd It will create a new Database named ARHyyyymmdd MDB to store all transactions before the specific date and delete all transactions before the specific date in the History Database Purge History Database before yyyy mm dd It will delete all transactions before the specific date in the History Database Archive Attendance Database before yyyy mm dd It will create a new Database named ARAyyyymmdd MDB to store all transactions before the specific date and delete all transactions before the specific date in the Attendance Database 76 UC SOFT PRO User s Manual Purge Attendance Database before yyyy mm dd It will delete all transactions before the specific date in the Attendance Database rig ae UC SOFT PRO User s Manual 6 0 Report It includes History Reports Attendance Reports Configuration Reports 78 UC SOFT PRO User s Manual 6 1 History Report Select History from Reports menu Then the History Report dialog box will be displayed History Report io Report Pernod tyvyyyimmidd hh mm from 2007 01 01 00 00 to 2099701 Aw 23 59 Transactions Types W Card Transactions lf Valid Card W PIN Violation W Others a b Timezone Violation W Site Code Violation W Not Found Card iW Anti pagsback Violation Point Transactions
46. trigger another Input or Output if the Input has been triggered There are five types of Interlock Action 1 No Action take no action Bees ee UC SOFT PRO User s Manual 2 Shunt Energize Shunt or Energize to the other Input or Output Un shunt De energize Un shunt or De energize to the other Input or Output 4 Pulse Pulse to the other Input or Output 5 Follow Same triggering method to the other Input or Output as itself Alarm View Select the Card Transaction status that will be shown on the Alarm View 239 2 UC SOFT PRO User s Manual Panel Panel IL Panel 1 Loop ID Loopt Address 01 gt Description General Header 1 Reader 2 Input 1 Input 2 Input 3 Input 4 Input 12 Output 1 Output 2 Output 13 Output 14 Output ID Panel 1 0 01 Description W Enable for Panel Control Auto ON Timezone hori W Auto relock by Input 1 Auto ON Timezone will be disabled when enable this option Toggle output status when itis pulsed Pulse Time 3 o nils w wiles Interlock IY Active f Input 01 C Output Mone ON Action Follow OFF Action No Action Cancel Fig 4 2 6 5 Output 1 and Output 2 Output 3 and Output 4 are for UC 1000 panels only Default setting for UC 2000 UC 1000 2 and UC 1000 3 Output Door Lock of Door 1 Output 2 Door Lock of Door 2 Default setting for UC 1000 4 Output 1 Door Lock of Door 1 Output 2
47. ulse Pulse to the other Input or Output 5 Follow Same triggering method to the other Input or Output as itself 34 UC SOFT PRO User s Manual Panel Ja Panel IL Panel 1 OO Loop ID Loop 1 Address 01 gt Description General Header 1 Reader 2 Input 1 Input 2 Input 3 Input 4 Input 12 Output 1 Output Output 13 Output 14 Output ID Panel 1 R1 LED Description Enable for Panel Control Auto ON Timezone More W Pulse output when valid card read on reader 1 Toggle output status when itis pulsed Pulse Time i C sO1le fe xls Interlock Active fe ane iane OM Acton Jo Acti OFF Action Jo Acti Cancel Fig 4 2 6 6 Output 13 and Output 14 for UC 2000 panels only For default setting Output 13 Valid Card feedback signal for Reader 1 LED or beeper Output 14 Valid Card feedback signal for Reader 2 LED or beeper It is not necessary to use the default setting but it will be easier to set up the system by using the default setting of UC SOFT PRO Output ID Maximum 25 Characters Unique name for each Output record Description Maximum 40 Characters Description of the Output record Enable for Panel Control So that Panel Control can directly control the Output a5 2 UC SOFT PRO User s Manual Auto ON Timezone At the specific Timezone the Output will be Energized automatically Pulse Output when valid Card
48. ximum 40 Characters Description of the Access Level record Invalid login attempts allowed No of invalid login attempts that is allowed Tick the accessible function for the operator level then click OK button to 60 UC SOFT PRO User s Manual confirm or click Cancel to abort Edit Operator Level Select the Operator Level record which you would like to modify Click Edit button or double click the selected record then the detail of the Operator Level dialog box will be displayed Click OK button to confirm the modification or click Cancel to abort Delete Operator Level Select the Operator Level record which you would like to delete Click Delete button Searching Select the record field from the Sorted by combo box then type in the searching text for searching 6 UC SOFT PRO User s Manual 4 6 2 Operator Each OPERATOR should have an OPERATOR LEVEL Basically unlimited OPERATORs can be added to the system Select Operator from Configuration menu under Operator Then the main Operator dialog box will be displayed Operator fal Record 1 1 Add Edit Delete a Close Operator ID OP Level ID admin MATT Full Access Sorted By Operator ID Search Fig 4 6 2 1 26 gt UC SOFT PRO User s Manual 1 Add Operator Click Add button and the detail of the Operator dialog box will be displayed Operator el Login IO Ament Uperator name Ament Chung
Download Pdf Manuals
Related Search