PowerFlex 700L Drive Cooling Loop Hose Kit
Contents
1. What This Kit Includes Tools That You Need Step 1 Attaching a Coupling to a Hose Step 2 Connecting an Elbow to a Pipe Nipple only 20L GHxx A2 Kits Installation Instructions PowerFlex 700L Drive Cooling Loop Hose Kit Two hoses Two drive side couplings Two heat exchanger side couplings Two male 1 inch to 1 inch elbows 37 only included with 20L GHxx A2 hose kits e Liquid soap e Tightening wrench e Backup wrench A Lubricate the inside of the hose end with a small amount of liquid soap B Set the coupling down on a solid surface and push the hose onto the coupling in one firm push until the hose end is flush against the plastic bushing Stopping before the hose is fully on may make it difficult to push the hose completely onto the coupling Attached E S ye Hose End Coupling Solid Surface To use a 13 kW capacity PowerFlex 700L Liquid to Liquid Heat Exchanger catalog number 20L LL13K P75A with a PowerFlex 700L Frame 3A drive the 20L GHxx A2 hose kit comes with 1 inch elbows that must be exchanged for the elbows provided with the heat exchanger A Use a 1 3 8 inch or adjustable wrench to remove the 1 inch to 3 4 inch reducers and 3 4 inch elbows already assembled on the heat exchanger at the TO DRIVE INLET and FROM DRIVE OUTLET connections There is no need to use a backup wrnech on the pipe nipple B Clean off any old thread sealer from inside the pipe2. l 852 2887 4788 Fax 852 2508 1846 Publication 20L INOO7A EN P January 2007 P N 181738 P01 Copyright 2007 Rockwell Automation Inc All rights reserved Printed in USA
3. nipples on the heat exchanger C Apply PTFE Teflon thread sealing tape or pipe thread sealant compound to threads on the 1 inch elbows supplied with the kit Important Only apply tape or sealant to the NPTF end DO NOT apply tape or sealant to the 37 flare end Teflon is a registered trademark of the DuPont Company D Use a 1 5 16 inch or adjustable wrench to secure the 1 inch elbows to the heat exchanger at the TO DRIVE INLET and FROM DRIVE OUTLET connections There is no need to use a backup wrench on the pipe nipple The elbows should be installed in a vertical down pipeline Step 3 Attaching the Please refer to the instructions in the PowerFlex 700L Liquid to Liquid Hoses Heat Exchanger User Manual Publication 20L UM002 in the Chapter 1 section titled Connecting Hoses to the Heat Exchanger U S Allen Bradley Drives Technical Support Tel 1 262 512 8176 Fax 1 262 512 2222 Email support drives ra rockwell com Online www ab com support abdrives www rockwellautomation com Power Conirol and Information Solutions Headquarters Americas Rockwell Automation 1201 South Second Street Milwaukee WI 53204 2496 USA Tel 1 414 382 2000 Fax 1 414 382 4444 Europe Middle East Africa Rockwell Automation Vorstlaan Boulevard du Souverain 36 1170 Brussels Belgium Tel 32 2 663 0600 Fax 32 2 663 0640 Asia Pacific Rockwell Automation Level 14 Core F Cyberport 3 100 Cyberport Road Hong Kong Te
Download Pdf Manuals
Related Search