Introduction to NF-368 Including - Sunsky
Contents
1. knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode ON is to turn on narrowband 12 5KHz and OFF is to activate wideband 25KHz When OFF is selected there is a W icon display on the bottom left corner of the LCD X Other features and settings 1 Channel memorization A Conventional channels memorization numbered from 01 99 B One special memorized channel emergency 29 channel No 00 Channel memorizing steps are as follow 1 At VFO mode select the required frequency as well as setting the required CTCSS and DCS 2 Hold the MR key for 2 seconds till display channel 00 99 flashes on the LCD And then rotate DIAL knob and select a channel among 00 99 channels 3 Press MR key again to store frequency and other data into the channel 4 It is still working at the frequency mode VFO at this time Meanwhile repeating above steps to input another frequency and save it to other channels Note To launch and receive different frequency needs to programmed with Frequency Programmed Software 2 Emergency channel operations emergency calling function NF 368 is built in a very useful emergency call feature Hold the F key for over 1 second and the 30 emergency call function can be activated At this time A The radio switch to the most commonly used channel OO channel to launch2. B The red indicator light flashes C The radio releases loud alarm sound D This function can be turned off by pressing launch button When come across danger while walking outdoors this function allows alarming to the family quickly Loud alarm sound may set back attack from gangster and avoid hurt 3 FM Radio FM 1 Hold MONITOR FM button once for over 2 seconds to enter FM radio receiving mode 2 Rotate DIAL knob to tune the frequency the frequency range 1s among 87 5 108 0MHz and step is LOOKHZ 3 Hold the MONITOR FM key for over 2 seconds again or press PTT button to exit FM 31 radio mode At FM radio state walkie talkie function retains priority always which means FM radio function exits automatically and turns to transceiver communication once there is same frequency signal received at FM radio receiving mode At FM radio frequency mode FM radio channel memorizing mode can be entered by pressing MR key there is 15 stored channels FM Radio Scanner 1 Scanning frequency at FM radio frequency mode press F key and then V M key is for whole frequency scanning start from the current frequency to scan the whole frequency range Clockwise rotate the encoder to scan from low to high and anti clockwise rotate to scan in descending order It stays when there is signal scanned Rotate the encoder to continue to scan up or down and press any key to exit 2 Channel scanning at
3. key and then rotate the DIAL knob clockwise or withershins to enter 09 K TONE to turn on or turn off the keypad tone 10 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 15 10 APO to set the automatically power off function 11 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 11 TOT to set the TX time limit 12 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 12 VOX to adjust the VOX function 13 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 13 POWER to select high or low power output 14 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 14 HLF DEV to select wide or narrow band VII Functions of Key Combination 1 F MODE for keypad locked Press F key and the icon will be showed on the bottom left corner of LCD and then press MODE to lock the keypad Repeat above steps to unlock the keypad amp icon will display on the LCD when keypad locked Operation of MODE key MR key and DIAL key will be invalid after keypad locked 2 F MR for scanning Frequency scanning in VFO mode Press F key and then press MR button to start scanning channel spacing is 12 5KHZ when there isa amp icon on bottom left corner of the LCD short press MR MODE or PTT button to stop scanning the frequency wil
4. turn on or turn off the FM radio DIAL knob his knob is for main tuning which is for operating frequency setting function menu selecting and other adjustment VOL oh olume control knob Rotate it clockwise to turn up F key Quickly press it to activate another function and hold it to make emergency call MODE key fetting functions via MODE key 13 MR k MR key oxy press it to select VFO mode or channel mode and hold it to memorize channels VI Functions Setting 1 Press MODE key to enter 01 DW dual frequency standby selecting 2 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 02 CODE selecting 3 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 03 CTCSS setting 4 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 04 DCS setting 5 Press MODE key and then rotate the DIAL 14 knob clockwise or withershins to enter 05 SQL level setting 6 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 06 BCLO busy channel lockout setting 7 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 07 LIGHT turn on or turn off the background light 8 Press MODE key and then rotate the DIAL knob clockwise or withershins to enter 08 SAVE to activate power save function 9 Press MODE
5. Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode 21 Note 3 high sensitivity which is used when there is only low background noise 2 Medium sensitivity which is used in most situations 1 low sensitivity which is used in situation with high background noise 13 POWER Power Selection Power of NF 368 can be set as high or low power according to actual using range and surrounding to reduce battery consumption Following is process of high and low power settings 1 Press MODE key and then tune DIAL knob to enter menu 13 And POWER displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode HIGH refers to high power 2W and LOW refers to low power 0 5W When LOW is selected the LCD displays icon LOW 14 HLF DEV Wide Narrow band selection 28 In many areas the required channel spacing is very small which need to reduce the modulation bandwidth of launching to avoid interference to adjacent channels Please adjust settings following steps below 1 Press MODE key and then tune DIAL knob to enter menu 14 And HLF DEV displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL
6. 9 VOX VOX function 12 OFF level 1 3 setting POWER High Low power 13 HIGH LOW setting HLFDEV Wide Narrow band 14 OFF ON selection IX Menu Function Description and Setting 1 Dual frequency function DW It is dual channels monitor scanning function via which it can inspect a custom monitoring channel channel 00 at VFO mode and channel mode operation Namely monitor and scan the current channel frequency and 00 channel frequency If there is signal received at monitor channel the scan stop at that frequency Following is process to start dual channel monitoring function 1 Press MODE key and then tune DIAL knob to enter the menu 01 And DW is displayed 20 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select OFF to turn off dual frequency standby and ON to activate dual frequency standby function 4 After selected press MODE key to confirm 5 Press PTT key to save the new settings and exit to normal operating mode 2 CODE selection This feature allows your radio keeping quiet when there is no specific call Please set it as following steps 1 Press MODE key and then tune DIAL knob to enter menu 02 And CODE is showed 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select OFF CTCSS DCS 4 Press MODE key to confirm after selected 5 Press PTT key to
7. FM radio frequency mode 32 press V M key once to enter channel state And press F and MR keys to enter channel scanning Clockwise rotate the encoder to scan channels from low to high and anti clockwise rotate to scan in descending order It stays when there is signal scanned Rotate the encoder to continue to scan up or down and press any key to exit x radio channel memorizing The same as transceiver channel memorization Maintenance Transceiver NF 368 you purchased is an exactitude design electronic products and please use it carefully Following maintenance ways may help extend its lifetime 1 Please don t try to disassemble the transceiver because non technicians processing may cause damage to the device 2 To use stable power supply please connect the specified USB cable to the DC jack of the transceiver 39 3 Please don t put the transceiver in sun or hot place for long time because the high temperature will shorten use life of electronic parts and cause distortion to plastic parts 4 Please keep the transceiver dry because rain and moisture will erode the electronic circuits 5 Please power off the transceiver and remove its battery pack immediately once there is peculiar smell or smog emit from the device Troubleshooting The battery pack has been exhausted Please change a new battery or recharge the battery The battery pack may be not installed correctly Pl
8. IV Preparation Before Using 2 Install belt clip overlay function Install the belt clip overlay on the back of NF 368 8 rechargeable battery case as following Usually it has been installed well in factory Install Lithium battery pack Put the original Lithium battery pack into the transceiver correctly as following picture shows Install rear case Install the battery rear case properly as following picture Fix the rear case As picture pull up the button in lock direction to avoid the rear case sliding 10 Install the belt clip Install the belt clip as picture Install the antenna Install the antenna as picture and rotate it clockwise till tight Charge The battery pack is without power when finished and please charges it before using When used for the first time after purchased or stored over two months the capacity of battery pack is less than normal However it will return normal after charged and discharged for five times Please connect charger to the transceiver properly as following picture V Operation Instruction Key functions PTT button TX key Hold this key to transmit and release after transmission finished POWER key Key for powering ON OFF transceiver will be turned on or turned off by pressing and holding this key for 2 seconds MONITOR FM Quickly press to monitor and hold it to
9. Index TAO CWC O Wa cut edhe keea anna TACIIGIING sasirnane a NES 6S Digor aM eorenas i E EEA Main Peatutes s2 cosaetensemar edicts LCD Indication 2 25 cexcuek dare conse cacegetae Preparation for Using Operation Guide 0008 Functions Setting 005 Key Combination 00000e WOT enced sia Morac eth eed ae ee ade Menu Description and SEUNA EER Other Features and Setting Mai NteN ane 230 0 dew nedecwanoacinacsouinss TROUDICSHOOUIING sser erreren etrr 19 Introduction to NF 368 Thanks for purchasing NANFONE UHF FM transceiver NF 368 Please read this manual carefully to learn its functions and operations before using With mini compact size large LCD display stable performance and easy to use feature transceiver NF 368 will be your best choice Including Please take the radio out carefully from the package and check again before disposing of the packing to make sure that all the following items are contained in the packaging If any of them are missing or damaged during transportation please contact with the vendor for service Accessories List Belt clip Hand strap Lithium battery pack Warranty card QC passed card Quantity ELA I NF 368 Diagram 1 Battery snap 2 Antenna 3 Volume knob 4 Coded selector 5 PTT button 6 Power supply jack 7 Indicator light 8 Monitor FM radio 9 FUN key 10
10. MENU key 11 MR key 12 Power control button 13 MIC jack 14 Speaker 15 Hand strap hole 16 Earphone jack II Main Features 1 Easy operation following menus with clear LCD display 2 Battery 3 7V 1200mAh rechargeable Lithium battery 3 Frequency 400MHz 470MHz 4 Wide Narrow band selectable 25KHz 12 5KHz 5 TX output power High 2W Low 0 5W 6 CTCSS 40 and DCS 82 7 Memory channels 99 memory channels 1 emergency channel 8 TOT Time Out Timer OFF 30s 60s 90s 120s 150s 180s 9 VOX function OFF 1 2 3 10 Audio call 1750KHz function 11 Emergency channel operating Emergency Alarm 12 Busy channel lockout BCLO 13 Dual frequency standby 14 CTCSS 15 DCS 16 Code 17 Scan VFO scan channel scan 18 Squelch level setting level 0 4 19 Signal power indicator table 20 Background light ON OFF 21 Power save function 22 Monitor function 23 Automatically check when powered on and then display voltage 24 Low battery alert 25 Keypad indicate tone 26 Keypad locked 27 APO Automatically Power Off 28 FM radio function frequency range 87 500 108 000MHz i Dual M LCD Indication ar 1 Way frequency Use menu 01 _ 2 3 i Keypad locked F MODE tone pe Be g A Low battery alert ah A NA NEL O INET T lw INE ay OAN an LAN a ak EA EAN E3 s F DW LOW SAVE D e EL o Ca WAM CO00o0g000O f fr i using een and setting channel No in call out state 03
11. NF368 will stay at active status and then get back to sleep state after call finished This feature can reduce battery consumption effectively Following is the steps to activate the power saving 24 function 1 Press MODE key and then tune DIAL knob to enter menu 08 And SAVE displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode ON is to activate the power saving mode LCD shows SAVE n power saving icon and the transceiver will enter power saving mode without signal receiving in 10 seconds at standby state OFF is to turn off power saving feature 9 KTONE Keypad tone setting ON OFF If the keypad tone causes inconvenience especially operating in the quiet room it can cancel easily as following steps 1 Press MODE key and then tune DIAL knob to enter menu 09 And KTONE displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 25 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode ON is for activating the keypad tone and LCD displays icon OFF is to turn off keypad tone 10 APO Automatically Power Off setting Automatically Power OFF APO func
12. ease install it again The battery used The use life of the battery out soon after is over please change new recharged battery Unable to talk with Please check the 34 other members in the same group Other not from group members sound heard in channels frequency and CTCSS DCS you use are the same as other members use in the same group The distance between you and other group members may be too far Please check if you are in the cover range of other group transceivers Please change your CTCSS DCS NO And it has to change all signal sound of the group transceivers 35
13. l stay at current frequency Channel scanning in channel mode Press F key and then press MR button to start scanning when there is a G icon on bottom left corner of the 17 LCD Rotate the code selector clockwise to scan in ascending order and rotate the code selector withershins to scan channels in descending order To stop scanning please press MR MODE or PTT button to stop scanning the channel will stay at current channel 3 F DIAL Wide Range Frequency Tuning Press F key and then rotate the DIAL knob to start tuning at 1MHz space when there is a icon on bottom left corner of the LCD Rotate the code selector clockwise to tune in ascending order and rotate it withershins to adjust in descending order 4 PTT MON FM for Audio Call Press PTT and then MONITOR FM buttons to start Audio Call 1750 KHz function The MONITOR FM key to exit VIII Menu Description No Display amp Description Setting Contents Dual frequency OFF ON aie a CODE Code setting OFF CTCSS DCS CTCSS CTCSS setting 67Hz 254 1HZ DCS DCS setting 023N 754N SQL C Squelch level j setting LIGHT Background light setting OFF ON Power save OFF ON function pan KTONG Keypad locked OFF ON or unlocked setting C Automatically OFF ON 30 minutes BCLO Busy channel lockout OFF ON setting power off function setting OFF 15 30 45 60 75 TOT TX l ES aie x1GOOS 1
14. save the new settings and exit to normal operating mode 3 CTCSS code selection The audio system called consecutive single audio squelch system Please set the CTCSS as following steps 21 1 Press MODE key and then tune DIAL knob to enter menu 03 And CTCSS displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select 67Hz 254 1Hz 40 groups totally 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode 4 DCS code setting This is a relatively new anti jamming advanced audio system which is better than CTCSS Please set the DCS as following steps 1 Press MODE key and then tune DIAL knob to enter menu 04 And DCS displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise to rotate DIAL knob to select 023N 754N totally 82 groups 5 SQL level setting Squelch system can eliminate background noise when there is no signal received which not only make it more comfortable at standby mode but also significantly reduces the standby power consumption Please set the squelch level following 22 steps below 1 Press MODE key and then tune DIAL knob to enter menu 05 And SQL is showed 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select 0 1 2 3 4 usually set as 1 which is the bes
15. t sensitivity point 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode 6 Busy channel lockout setting BCLO BCLO function is for prohibiting transmitter when there are other signals to prevent breaking other people s communications inadvertently Please set it as following steps 1 Press MODE key and then tune DIAL knob to enter menu 06 And BCLO is displayed 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON or OFF 4 After selected press MODE key again to confirm 5 Press PTT key to save the new settings and exit 23 to normal operating mode 7 LIGHT Background Light ON OFF Selection 1 Press MODE key and then tune DIAL knob to enter menu 07 And LIGHT displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode When OFF is selected the backlight will automatically turn off as the transceiver is at Sleep mode 8 SAVE Power saving function The transceiver has a very important automatic power saving receive function which allows the radio to enter sleep state and wake up periodically to check and receive signal If there is call in the channel
16. tion refers to the transceiver turns off automatically without any operation when there is no signal received in 30 minutes which helps extend the battery life Following is steps to start the APO function 1 Press MODE key and then tune DIAL knob to enter menu 10 And APO displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode 11 TOT Time Out Timer Time Out Timer TOT feature is to limit the continuous launching over time by a safety switch 26 Please follow below steps to activate TOT function 1 Press MODE key and then tune DIAL knob to enter menu 11 And TOT displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4 Press MODE key again to confirm after selected 5 Press PTT key to save the new settings and exit to normal operating mode 12 VOX Voice operated Setting VOX function allows launching by voice only without pressing PTT key and launching stop automatically once speak stops Following is VOX setting process 1 Press MODE key and then tune DIAL knob to enter menu 12 And VOX displays 2 Press MODE key again to enter the menu 3 Clockwise or counterclockwise rotate DIAL knob to select ON OFF 4
Download Pdf Manuals
Related Search