Home

Mode A - Omez Lighting

1. e Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to the point they exit from the unit e Cleaning unit should be cleaned only as recommended by the manufacturer See Cleaning for details e Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat e The unit should be serviced by qualified service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the appliance C The appliance has been exposed to rain or water D The appliance does not appear to operate normally or exhibits s marked change in performance Set UP Power Supply Before plugging your unit in be sure the source voltage in your area matches the voltage required for your every suit Every suit is available in a 100v and240v version Because line voltage may vary from venue to venue you should be sure your unit voltage matches the wall outlet voltage before attempting to operate you unit DMX Linking To ensure proper DMX data transmission when using several DMX units try to use the shortest cable path possible The order in which units are connected in a DMX line does not influence the DMX addressing For example a unit assigned a DMX address of 1 may be placed anywhere in a DMX line at the
2. this unit Please keep this manual with the unit for future reference Features eMulti Colors e Master Slave synchronization eColor Strobe e LED operation menu with eElectronic Dimming 0 100 function buttons eDMX 512 protocol e Daisy Chain Units Together in DMX Mode Safety Precautions e To reduce the risk of electrical shock or fire do not expose this unit to moisture e Do not spill water or other liquids into or on to your unit e Be sure that the local power outlet match that of the required voltage for your unit e Do not attempt to operate this unit if the power cord has been frayed or broken Do not attempt to remove or break off the ground prong from the electrical cord This prong is used to reduce the risk of electrical shock and fire in case of an internal short e Disconnect from main power before making any type of connection e Do not remove the cover under any conditions There are user serviceable parts inside e Never operate this unit when its rear cover is removed e Never plug this unit into a dimmer pack e Always be sure to mount this unit in an area that will allow proper ventilation Allow about 6 15cm between this device and a wall e Do not attempt to operate this unit if it becomes damaged e This unit is intended for indoor use only use of this product outdoors voids all warranties e During long periods of non use disconnect the units main power e Always mount this unit un safe and stable matter
3. 39 Red on and off 10 seconds 140 159 Green on and off 10 seconds 160 179 Blue on and off 10 seconds 180 199 Light yellow on and off 10 seconds 200 219 Cyan on and off 10 seconds 220 229 White on and off 10 seconds 230 249 All on 250 255 7 Dimmer Dimmer All off All on 0 255 Cleaning Due to fog residue smoke and dust cleaning the internal and external optical lenses must be carried out periodically to optimize light output 1 Use normal glass cleaner and a soft cloth to wipe off the outside casing 2 Clean the external optics with glass cleaner and a soft cloth every 20 days 3 Always be sure to dry all parts completely before plugging the unit back in Cleaning frequency depends on the environment in which the unit operates i e smoke fog residue dust dew Trouble Shooting Listed below are a few common problems the user may encounter with solutions Unit not responding to DMX 1 Check that the DMX cables are connected properly and are wired correctly pin 3 is hot on some other DMX devices pin 5 may be hot Also check that all cables are connected to the right connectors it does matter which way the inputs and outputs are connected OMEZ LIGHTING 11301 IRIS LN B EL MONTE CA 91731 www omezlighting com Tel 888 683 OMEZ 626 579 1890 E mail info omezlighting com
4. OMEZ LIGHTING TitanPar par64 18 4in1 User Instructions OMEZ LIGHTING 11301 IRIS LN 2B EL MONTE CA 91731 www omedzlighting com High Power LED Series User Manual Introduction Unpacking Thank you for purchasing our high power led light Every suit has been thoroughly tested and shipped in perfect condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intactly In the case damage has been found or parts are missing please contact the manufacturer or your dealer for further instructions Do not return this unit to your dealer without any warning Warning To prevent or reduce the risk of electrical shock or fire Do not expose this to rain or moisture Caution There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufacturer warranty In the unlikely event your unit may require service please contact the manufacturer or your dealer Please recycle the shipping carton whenever possible General Instructions To optimize the performance of this product please read these operating instructions carefully to familiarize you with the basic operations of this unit These instructions contain important safety information regarding the use and maintenance of
5. beginning at the end or anywhere in the middle When a unit is assigned a DMX address of 1 the DMX controller knows to send DATA assigned to address 1 to that unit no matter where it is located in the DMX chain Operating Instructions Operating Modes You can use the suit in 3 ways Auto Mode The unit will automatically chase through the different colors DMX control mode This function will allow you to control each individual units traits with a standard DMX 512 controller Master slave mode One unit will work as the master in the one of the above three modes other units in the chain will work in synchronization towards the master DMX Mode Operating through a DMX controller give the user the freedom to create their own Programs tailored to their own individual needs This function also allows you to use your units as spot lights 1 This function will allow you to control each individual unit s traits with a standard DMX 512 controller 2 The LED suit uses 3 4 6DMX channels to operate Please see DMX Values and Functions for the DMX traits 3 Torun your unit in DMX mode plug in the unit via the XLR connections to any standard DMX controller Set your desired DMX address following the setup specifications that come with your DMX controller Touch Buttons There are four touch buttons under the LED display Menu Up Down Enter Normally the LED will display the current DMX v address code of the fixtur
6. e At this time presses up and down MENU DOWN ENTER to choose the functions you want LED Operation Menu LED screen with four touch buttons MENU UP DOWN and ENTER Press MENU to return to the upper menu Press UP or DOWN to scroll into the menu options or to adjust the values Press ENTER to confirm After power on and initialization it will show the status before last power off Then the unit is ready for setting and working Please see the following table for setting information LED Display 1 512 0 100 0 100 0 100 0 100 0 100 0 100 0 100 0 100 1512 DMX setup in 3 mode 0 100 50 100 Aoo1 Mode A 4 Channelss R G B W Poot Mode P 5 Channels Dimmer Strobe R G B W Foo1 Mode F 7 Channels R G B W Strobe Macro Dimmer Mode A 1 R 0 255 2 G 0 255 3 B 0 255 4 W 0 255 Mode P Dimmer 0 152 Strobe slow to fast 153 196 1 Di immer Auto strobe slow to 197 242 fast RGB dimmer 243 255 2 R R 0 255 3 G G 0 255 4 B B 0 255 5 W W 0 255 Mode F 1 R R 0 255 G G 0 255 3 B B 0 255 W W 0 255 No function 0 1 5 Strobe Strobe slow to fast 2 196 Auto strobe slow to fast 197 255 No function 0 1 Color fade slow to fast 2 19 Color Transient slow to fast 20 39 Color free slow to fast 40 59 Yellow 60 79 Purple 80 99 Light green 100 119 6 Marco Orange 120 1

Mode A - Omez Lighting

Contents

Download Pdf Manuals

Related Search

Related Contents