TM-T88V-i User`s Manual - Epson America, Inc.
Contents
1. Connecting the AC Adapter on page 6 Error LED is on L Check whether the roll paper cover is correctly closed If the Paper LED is on check whether the roll paper is correctly installed and any roll paper remains Installing Replacing the Roll Paper on page 12 Error LED is flashing L Check whether paper is jammed If it is jammed remove it lt 2 Paper is jammed on page 15 L Printing stops if the thermal head overheats and resumes automatically when it cools For other cases turn the printer off and after 10 seconds turn it back on Paper is jammed A L ca UTION Do not touch the thermal head and the frame on its side because they can be very hot after printing Thermal head When paper is jammed never pull out the paper forcibly Open the roll paper cover lt 2 Opening the roll paper cover on page 10 and then remove the jammed paper 15 English The roll paper cover will not open When the autocutter blade is locked the roll paper cover will not open Follow the steps below to return the autocutter blade to the normal position 1 Turn off the printer lt 3 Turning Power On Off on page 10 2 Open the cutter cover lt P Opening the cutter cover on page 11 3 Turn the knob in the direction of the arrow until you see a triangle in the opening of the frame 42. Close the cutter cover 5 Open the roll paper cover lt 2 Opening the roll paper cover on page 10 16 English Specifications Item Specification Printing method Thermal line printing Roll paper dimensions Paper width 79 5 mm 0 5 mm 3 13 0 02 Diameter 83 mm 3 27 maximum Inside diameter of core 12 mm 0 47 Outside diameter of 18 mm 0 71 core Thermal paper type NTPO80 80 Interface Ethernet x1 10BASE T 100BASE TX Serial x1 D sub 9 pin male USB x4 USB 2 0 Type A 5 V 500 mA Micro USB x1 USB 2 0 Micro AB 5 V 500 mA micro SD card x1 Drawer kick out x1 Power supply Dedicated AC adapter AC adapter RA Model M266A DC 24V 1 8 A DC 5 V 2 5 A Dedicated AC adapter AC adapter T Model M266A Input AC 100 V to AC 240 V 50 Hz to 60 Hz 1 8 A Output DC 24 V 2 1 A DC 5 V 3 0 A AC power consumption Operating 230 V 50 Hz 38 7 W 115 V 60 Hz 38 8 W Standby 230 V 50 Hz 2 8 W 115 V 60 Hz 2 7 W Temperature Operating 5 to 45 C 41 to 113 F Storage 10 to 50 C 14 to 122 F Humidity Operating 10 to 90 RH Storage 10 to 90 RH Overall dimensions WxDxH 145 mm x 195 mm x 148 mm 5 71 x 7 68 x 5 83 including connector cover Mass excluding paper and AC adapter Approx 1 6 kg 3 5 Ib 1 58 mm width paper 57 5 0 5 mm is also available For information on how to change paper width see Technical Reference Guide 2
3. cable pass the cables through the cable band to prevent them from coming off Cable band English Detaching the connector cover To remove the connector cover turn the printer over and push the connector cover down while pushing the both sides of the connector cover inward to detach the hooks from the printer case Attaching the Power Switch Cover Attaching the enclosed power switch cover prevents inadvertent changing of the power switch and tampering You can turn the power switch on and off by inserting a sharp pointed object in the holes in the power switch cover To detach the cover also use a sharp pointed object A WARNING Ifan accident occurs with the power switch cover attached unplug the AC cable immediately Continued use may lead to fire or electric shock English Basic Operations Turning Power On Off Press the power switch to turn on off the printer Note It takes approximately 30 seconds after the printer is turned on until it is ready for printing Opening the Covers Opening the roll paper cover Press the cover open button to open the roll paper cover 10 English Opening the cutter cover Slide the cutter cover toward front to open it 11 English Installing Replacing the Roll Paper Follow the steps below to install replace the roll paper A CAUTION Be sure to use the specified roll paper F Specifications on page 17 1 Open the roll paper
4. 500 mA at maximum for one port 2 A at maximum for total of the 5 ports USB and Micro USB ports 3 Available when the PHP function is enabled For information on how to setup PHP environment see TM i Series PHP Setup Manual Be sure to use a micro SD card with the wear leveling function 4 Based on Epson operating conditions 17 English Appendix Downloading Software and Manuals The latest versions of SDK utilities and manuals can be downloaded from one of the following URLs For customers in North America go to the following web site http www epsonexpert com For customers in other countries go to the following web site http download epson biz com service pos Open Source Software License This product uses open source software in addition to Epson proprietary software For information of the open source software used in this product see the following URL http xxx xxx xxx xxx licenses For xxx xxx xxx xxx in the above URL input your printer s IP address Restriction of Use When this product is used for applications requiring high reliability safety such as transportation devices related to aviation rail marine automotive etc disaster prevention devices various safety devices etc or functional precision devices etc you should use this product only after giving consideration to including fail safes and redundancies into your design to maintain safety and total system reliability Because
5. EPSON EXCEED YOUR VISION TM T88V I User s Manual Important Safety Information page 2 Part Names and Functions 006 page 4 DEED veces ses ETTET NEET TEATATI TEET TTET page 6 Basic Operations ccc ccc cece eee eees page 10 Installing Replacing the Roll Paper page 12 CI GAMING 4 incl spate a Veena dense es ENT page 14 Troubleshooting ccecenee eee eeeaes page 15 Specifica ONS serei raae EE page 17 Appendix sssnnsnnsnnsesnesussesusseen page 18 M00076400EN English Important Safety Information This manual presents important information intended to ensure safe and effective use of this product Read this manual carefully and store it in an accessible location For information on development of a system with this product and setup see also Technical Reference Guide You can access Technical Reference Guide from the included Manual CD Key to Symbols The symbols in this manual are identified by their level of importance as defined below Read the following carefully before handling the product A WARNING Warnings must be observed carefully to avoid serious bodily injury A CAUTION Cautions must be observed to avoid minor injury to yourself damage to your equipment or loss of data Note Notes have important information and useful tips on the operation of your product Safety Precautions A WARNING Ll If this product produce
6. TION L Do not use this product in locations subject to high humidity or dust levels Excessive humidity and dust may cause paper jams and other problems such as fire or electric shock CJ Be sure to set this product on a firm stable horizontal surface The product may break or cause injury if it falls L Do not stand on or place heavy objects on top of this product Equipment may fall or collapse causing breakage and possible injury I Take care not to injure your fingers on the manual cutter e when you remove printed paper e when you perform other operations such as installing replacing roll paper L The print head can be very hot during and immediately after printing If you need to touch it such as for cleaning wait until it cools down Touching it before that may cause burns L Do not connect a telephone line to the drawer kick connector of this product The telephone line or product may become damaged L To ensure safety unplug this product before leaving it for an extended period Caution Labels The caution label on the product indicates the following precautions A L ca UTION Do not touch the thermal head and the frame on its side because they can be very hot after printing A CAUTION When connecting external devices to the USB including Micro USB ports follow the precautions below L Confirm the rated current of the external devices by checking the descriptions on the devices or manuals Connect t
7. blems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation EPSON is a registered trademark of Seiko Epson Corporation in Japan and other countries regions Other product and company names used herein are for identification purposes only and may be trademarks or registered trademarks of their respective companies Epson disclaims any and all rights in those marks NOTICE The contents of this manual are subject to change without notice 2014 Seiko Epson Corporation All rights reserved 19
8. cover F Opening the roll paper cover on page 10 2 Remove the used roll paper core if there is one 3 Insert the roll paper in the correct direction 12 English 5 Tear off the paper with the manual cutter 13 English Cleaning Cleaning the Printer Case Be sure to turn off the printer and wipe the dirt off the printer case with a dry cloth or a damp cloth A CAUTION Never clean the printer with alcohol benzine thinner or other such solvents Doing so may damage or break the parts made of plastic and rubber Cleaning the Thermal Head To maintain print quality Epson recommends cleaning the thermal head periodically generally every 3 months by following the steps below A L ca UTION L The thermal head and the frame on its side can be very hot after printing Be careful not to touch them and to let them cool before you clean it L Do not damage the thermal head by touching it with your fingers or any hard object 1 Turn off the printer lt 3 Turning Power On Off on page 10 2 Open the roll paper cover lt 7 Opening the roll paper cover on page 10 3 Clean the thermal elements of the thermal head with a cotton swab moistened with an alcohol solvent ethanol or IPA Thermal head 14 English Troubleshooting Power LED does not light Check whether the AC adapter is correctly connected
9. ernet port DC in 24V DC in 5 V USB ports USB port Note If the connector cover is attached detach it to access the ports or connectors F Detaching the connector cover on page 9 English Setup Connecting the AC Adapter Follow the steps below to connect the AC adapter Z WARNING Be sure to use the specified AC adapter AC adapter RA Model M266A Connection to an improper power source may lead to equipment damage fire or electric shock 1 Firmly insert the DC connectors of the AC adapter all the way into the 5 V and 24 V DC in connectors on the printer 2 Firmly insert the connector of the AC cable all the way into the AC inlet on the AC adapter 3 Firmly insert the plug all the way into the grounded wall outlet 4 Set the AC adapter so that its label side is facing down DC in 24V O English Connecting External Devices If you connect external devices connect each cable to the port connector on the back of the printer lt 2 Interface on page 5 A CAUTION L When connecting external devices to the USB including Micro USB ports follow the precautions below Confirm the rated current of the external devices by checking the descriptions on the devices or
10. he external devices only when those total rated current is less than 2 0 A Do not use a device whose rated current is unclear L Use UL approved external devices only for North American users English Part Names and Functions Roll paper cover 3 Cover open button Connector cover Power switch Roll paper cover Open this cover to install replace the roll paper Manual cutter Use this cutter when you cut the roll paper manually Cutter cover Open this cover to unlock the autocutter blade when the roll paper cover does not open due to a paper jam Paper is jammed on page 15 Power switch Use this switch to turn on or off the printer Cover open button Use this button to open the roll paper cover Connector cover Use the printer with this cover attached to protect cables 29 Attaching the Connector Cover on page 8 English Control panel LI amp Power LED This LED is on when the printer is on Lt Error LED This LED indicates an error Error LED is on on page 15 or Error LED is flashing on page 15 LI Paper LED This LED is on when the paper is near end or out This LED flashes when the printer is in standby L Feed button This button feeds paper Interface All the ports and connectors are located on the back of the printer Drawer kick out connector i micro SD card slot Serial port Micro USB port Eth
11. manuals Connect the external devices only when those total rated current is less than 2 0 A Do not use a device whose rated current is unclear Use UL approved external devices only for North American users L When using the printer make sure the protective cover fits firmly into place L When Ethernet cables are installed outdoors make sure devices without proper surge protection are cushioned by being connected through devices that do have surge protection Otherwise the devices can be damaged by lightning Note Connecting the optional Wireless LAN Cable Set OT WLO1 to the USB connector enables the wireless LAN connection While connecting via wireless LAN keep the Ethernet cable unconnected to the printer English Attaching the Connector Cover Follow the steps below to attach the connector cover to protect the cables 1 Turn over the printer 2 Position the two hooks on both sides of the connector cover so that they hook the printer case and then push the connector cover to click onto the printer case 3 Pass each cable through the cable exits of the connector cover If the cables are too many for one cable exit use multiple exits 4 Turn over the printer and make sure the cables are not pinched Note When connecting the cables whose connectors do not lock themselves USB cable and DC 5 V
12. s smoke a strange odor or unusual noise immediately unplug the AC cable and then contact your dealer or an Epson service center for advice Continued use may lead to fire or electric shock L Do not use this product with any voltage other than the specified one Doing so may lead to fire or electric shock LI Be sure to use the specified power source Epson AC adapter RA Model M266A Connection to an improper power source may lead to equipment damage fire or electric shock Li Do not connect the cables in ways other than those specified in the manuals Different connections may cause equipment damage or fire L Do not use this product where inflammable fumes of gasoline benzine thinner or other inflammable liquids may be in the air Doing so may cause an explosion or fire L Do not use aerosol sprayers containing flammable gas inside or around this product Doing so may cause fire Li If water or other liquid spills into this product immediately unplug the AC cable and then contact your dealer or an Epson service center for advice Continued use may lead to fire or shock L Do not allow foreign objects to fall into this product Penetration by foreign objects may lead to fire or electric shock L Never attempt to repair this product yourself Improper repair work can be dangerous English L Never disassemble or modify this product Tampering with this product may result in injury fire or electric shock A CAU
13. this product was not intended for use in applications requiring extremely high reliability safety such as aerospace equipment main communication equipment nuclear power control equipment or medical equipment related to direct medical care etc please make your own judgment on this product s suitability after a full evaluation 18 English Caution No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation No patent liability is assumed with respect to the use of the information contained herein While every precaution has been taken in the preparation of this book Seiko Epson Corporation assumes no responsibility for errors or omissions Neither is any liability assumed for damages resulting from the use of the information contained herein Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions Seiko Epson Corporation shall not be liable against any damages or pro
Download Pdf Manuals
Related Search