Satura Spot LED PRO User Manual ver 1
Contents
1. 255 100 Frost E nn to MIN Diameter i Pulse Opening FAST to SLOW Pulse Closing SLOW to FAST LE FINE 255 Iris FINE Adjustment 3l SATURA SPOT LED PRO User Manual Ver 1 ELATION i i ei LA www elationlighting com ELATION SATURA SPOT LED PRO DMX Channel Values Functions VERSION 1 26 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on the orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND EXTEND ERI PAN TILT MOVEMENT SPEED 0 225 MAX to MIN Speed 25 226 235 BLACKOUT by Movement 236 245 BLACKOUT by ALL Wheel Changing 6 246 255 NO Function LAMP ON OFF RESET INTERNAL PROGRAMS 0 19 GOBO Change Normal 20 29 NO Function 30 39 GOBO Change to Any Position 40 79 NO Function 80 84 ALL MOTOR Reset 85 87 SCAN MOTOR Reset 88 90 NO Function 91 93 GOBO MOTOR Reset 2 94 96 NO Function 97 99 OTHER MOTOR Reset 100 119 Internal Program 1 Scene 1 8 120 139 Internal Program 2 Scene 9 16 140 159 Internal Program 3 Scene 17 24 160 179 Internal Program 4 Scene 25 32 180 199 Internal Program 5 Scene 33 40 200 219 Internal Program 6 Scene 41 48 220 239 Internal Program 7 Scene 49 56 240 255 Music Control Scene of Program 1 32 SATURA SPOT LED PRO User Manual Ver 1 www elationl2. CAUTION Disconnect from mains before starting maintenance operation CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in which the fixture operates damp smoky or particularly dirty environments can cause greater accumulation of dirt on the fixture s optics e Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation e Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended to insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues to an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections A detailed electric check by an approved electrical engineer every three months to make sure the circuit contacts are in good condition and prevent overheating e Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall e Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling suspension trussing Deformations in the housing could allow for
3. ELATION SATURA SPOT LED PRO User manual jonuow jesn Odd AA LOdS vanivs NOILV 13 www elationlighting com 2014 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Ker
4. Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Fixture is fully operational in the specific mounting positions as illustrated below SNS ERR TP RUNS UU Ln RENNES CUT RR LAN x ow Wo Ru Qr WI AXA XA XA XxX AN A XN X LIES 3 SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment to ensure the fixture will not drop if the clamp fails 11 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CLAMP MOUNTING The SATURA SPOT LED PRO provides a unique mounting bracket assembly that integrates the bottom of the base the included Omega Brackets x2 and safety cable rigging point in one unit see the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamps to the included omega brackets using a MIO screw fitted through the center hole of the Omega Bracket Be sure to attach the included Safety Cable to the fixture using the safety cable rigging point integrated in the base assembly LT Pilg LT TP AR x SLD 1 Omega holders 2 Clamp S Safety rope 4 Quick lock fast
5. Button 12 Carrying Handle s 13 Wireless DMX Antenna 14 5pin DMX Output 15 Spin DMX Input 16 3pin DMX Output 17 3pin DMX Input 18 powerCON IN 19 Fuse 149509070809 9 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com FIXTURE INSTALLATION CAUTION Please consider the GB7000 15 EN60598 2 17 and the other respective national norms during the installation The installation must only be carried out by a qualified person CAUTION T he electric connection mustonly be carried out by a qualified electrician 3 CAUTIONS For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Ambient operating temperature range for this fixture is 14 to 113 F 10 to 45 C Do not use the fixture under or above this temperature Before mounting the fixture to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 650 Ibs 295 kg Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ff 1 5m away from any flammable materials decorations pyrotechnics etc 10 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com MOUNTING POINTS
6. PAN and TILT motors and set dimmer to 100 PAN and TILT functions will still operate if the fixture needs to be positioned to a flat clear surface With the individual functions you can focus the light on a flat surface wall and perform fine adjustments 22 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com EFFECT ADJUST Calibration i gt ONLY QUALIFIED TECHNICIANS SHOULD PERFORM THIS FUNCTION This function allows small adjustments to be made to the effect wheels to compensate for ware or in the event a sensor has been knocked slightly out of place Because improper use of this function can result in undesired operation this function has been password protected The password is 050 and must be entered each time the calibration menu function is entered Because calibration is an extremely delicate procedure instructions on performing this action are left out of this manual For a first time calibrator please contact our customer support team for step by step instructions USER MODE SET User Mode select operating mode which includes DMX Channel and User defined modes USER MODE SET Edit User Mode Create user defined channel orders allowing the fixture to match the channel order of other fixtures on the market for easier operation A total of three user modes may be configured User Mode A User Mode B and User Mode C EDIT PROGRAM Select Program select one of the 10 user defined internal Auto P
7. and improvements in the design of this unit and this manual are subject to change without any prior written notice 39 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com OPTIONAL ACCESSORIES CONFORMS TO UL STD 1573 CERTIFIED TO CSA STD C22 2 NO 166 MODEL SATURA SPOT LED PRO C y US AC100 240V 50 60Hz 420W MAX I Made in PRC DRY LOCATIONS nt C riek NOT FOR RESIDENTIAL USE NOT FOR HOUSEHOLD USE DISCONNECT FROM MAIN SUPPLY BEFORE SERVICING EMPLACEMENTS SECS IMPROPRE AL USAGE DOMESTIQUE D BRANCHER LA SOURCE PRINCIPALE AVANT L ENTRETIEN 40 SATURA SPOT LED PRO User Manual Ver 1
8. operates if NO DMX signal is detected 20 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com PERSONALITY Status Settings Pan Reverse When ON all PAN movements are reversed inverted PERSONALITY Status Settings Tilt Reverse When ON all TILT movements are reversed inverted PERSONALITY Status Settings Pan Degree select desired maximum degree of the Pan movement PERSONALITY Status Settings Feedback When ON the fixture automatically performs PAN TILT correction in the event either one is disrupted during normal operation PERSONALITY Status Settings Movement Speed select desired Movement Speed PERSONALITY Status Settings Mic Sensitivity select desired Microphone Sensitivity PERSONALITY Status Settings Hibernation oelect desired Hibernation time PERSONALITY Service Setting Password Display the fixture timer password 050 PERSONALITY Service Setting RDM PID RDM PID Code PERSONALITY Fans Control oelect desired Fan setting PERSONALITY Display Setting Shutoff Time Define how many minutes before the LCD Menu display will automatically shut OFF PERSONALITY Display Setting Display Reverse When ON the LCD Menu display by is rotated inverted 180 PERSONALITY Display Setting Key Lock When ON Control Panel buttons lock automatically after exiting main menu for 15 seconds To unlock ke
9. signal from controller is not connected oris not inserted completely into the DMX input jack of the fixture he DMX controller is switched off or defective The DMX cable or connector is defective ADMX terminator has been inserted into the last fixture in your DMX chain 16 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The SATURA SPOT LED PRO comes with an easy to navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the SATURA SPOT LED PRO During normal operation pressing MODE ESC button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP DOWN RIGHT and LEFT buttons Once you reach a field that requires adjusting press the ENTER button to activate that field and use the UP and DOWN buttons to adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing the MODE ESC button NOTE To access the LCD Menu Control Display via the internal battery press and hold the DC SWITCH button for 2 seconds The LCD Menu Control Display will shut OFF automatically about 1
10. 13 13 Clockwise GOBO Rotation from FAST TO SLOW NO Rotation Counterclockwise GOBO Rotation from SLOW to FAST GERNE ROTATING GOBO WHEEL FINE INDEX ROTATION foe Ee Gobo Rotation FINE Indexing mL x m 0 O w O ale m m p GOBO 1 Shake SLOW to FAST GOBO 2 Shake SLOW to FAST GOBO 3 Shake SLOW to FAST GOBO 4 Shake SLOW to FAST GOBO 5 Shake SLOW to FAST GOBO 6 Shake SLOW to FAST GOBO 7 Shake SLOW to FAST GOBO Wheel Rotation from SLOW to FAST OL OF oJ O OF OF o O O Of OJ of of O o gt gt gt gt wo O O OO ol O of O NEO Oy BR ol nj 30 SATURA SPOT LED PRO User Manual Ver 1 ELATION i ei LA www elationlighting com ELATION SATURA SPOT LED PRO DMX Channel Values Functions VERSION 1 26 DMX Channels specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on the orientation of the fixture head MODE CHANNEL VALUE FUNCTION KY PRISM PRISM GOBO MACROS ROTATING PRISM INDEX ROTATION Indexing 128189 189 Clockwise PRISM Rotation from FAST to SLOW 193 NO Rotation 255 Counterclockwise PRISM Rotation from SLOW to FAST Focus 255 Continuous Adjustment from FAR to NEAR 0 255 Continuous Focus FINE Adjustment MOTORIZED ZOOM BE ZOOM Adjustment from SMALL to BIG MOTORIZED ZOOM FINE 0127 127 Open
11. TA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator will decrease the possibilities of erratic behavior r Termination reduces signal errors and avoids signal transmission problems IN and interference It is always advisable to connect a DMX terminal Resistance f N 120 Ohm 1 4 W between PIN 2 DMX Nans and PIN 3 DMX of the last fixture PIN2 5pin XLR DMX CONNECTORS some manufactures use 5pin XLR connectors for DATA transmission in place of 3pin opin XLR fixtures may be implemented in a 3pin XLR DMX line When inserting standard 5pin XLR connectors in to a 3pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out 5 Pin XLR Male In Data Compliment signal Pin 2 Data True signal Pin 3 Not Used Ping Do Not Use Notused Pns Donatus 15 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this s
12. XX Edits User Defined PAN CHOI Channel Assignments Edit Program Ptep0l SCex Pogrminloop Save and Exit an Ti hates Fade Time Scene 250 Scene Time nput By Outside Record Controller Automatic Scenes Recorder FUNCTION DMX Address Define desired DMX address via the Control Panel Auto Pro Part Program 1 10 Program 1 select Programs Auto Pro Part2 Program 1 10 Program 2 Select Programs To Be Run Auto Pro Part3 Program 1 10 Program 3 Edit Program FUNCTION DMX Value Display DMX 512 value of each channel FUNCTION Slave Mode Define fixture slave mode Slavel Slave2 Slave3 FUNCTION Auto Program Define fixture mode Master or Alone for running Auto Programs Select desired internal programs under Select Program set the number of steps under Edit Program and edit individual scenes under Edit Scenes FUNCTION Sound Control Define fixture mode Master or Alone for running Auto Programs via sound activation default is Master INFORMATION Time Information Current Time Displays fixture run time from last power ON The counter is reset after each time the fixture is powered OFF INFORMATION Time Information Total Run Time Displays fixture total run time 19 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com INFORMATION Time Information Last Run Time Displays fixture run time for a given period of time i e renta
13. ailed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB Gobo Wheel 2 Er The gobo wheel 2 is not located in the default position after start up or after a reset command This message will appear after a fixture reset if the gobo wheel s magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB Focus Er This message will appear after the reset of the fixture and if the magnetic indexing circuit malfunctions sensor failed or magnet missing or the stepping motor is defective or its driver circuit on the main PCB The focus motor is not located in the default position after the reset Iris Er This message will appear after the reset of the fixture and if the magnetic indexing circuit malfunctions sensor failed or magnet missing or the stepping motor is defective or its driver circuit on the main PCB The iris motor is not located in the default position after the reset Zoom Er This message will appear after the reset of the fixture and if the magnetic indexing circuit malfunctions sensor failed or magnet missing or the stepping motor is defective or its driver circuit on the main PCB The zoom motor is not located in the default position after the reset 34 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CLEANING AND MAINTENANCE
14. ain flashing in the display as a reminder of internal errors PAN Movement Er The yoke is not located in the default position after start up or after a reset command This message wil appear after a fixture reset if the pan s magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a motor failure defective motor or a defective motor IC drive on the main PCB This error may also be displayed if the head yoke was blocked during a reset function TILT Movement Er This message will appear after a fixture reset if the til s magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a motor failure defective motor or defective motor IC drive on main PCB This error may also be displayed if the head was blocked during a reset function 33 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com Gobo Wheel 1 Er The gobo wheel 1 is not located in the default position after start up or after a reset command This message will appear after a fixture reset if the gobo wheel s magnetic indexing circuit malfunctions sensor failed or magnet is missing or there is a stepper motor failure defective motor or defective motor IC drive on main PCB Gobo Rot 1 Er The rotating gobo is not located in the default position after start up or after a reset command Ihis message will appear after a fixture reset if the gobo positioning magnetic indexing circuit malfunctions sensor f
15. ansmitter even if the fixture is turned OFF for extended periods of time 2 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CLEARING EWDMX TRANSMITTER LINK e Access the fixtures main menu and toggle to the PERSONALITY menu then access the Wireless DMX sub menu and select Clean WDMX Memo to clear any existing link between the fixture and a EWDMX Transmitter The EWDMX indictor on the fixture will turn solid RED when the link is severed e You may also clear the link directly from the EWDMX Transmitter First be sure the fixture s is powered ON and then hold down the configuration button on the WDMX Transmitter for as least 5 seconds This will automatically clear the link between the EWDMX Transmitter and any fixture that is powered ON All EWDMX indictors will glow solid RED if the procedure was successful EWDMX INDICATORS RED GREEN Rapid Flashing Syncing to a EWDMX Transmitter RED GREEN Slow Flashing Paired with a EWDMX Transmitter but not receiving a DMX signal from a controller GREEN Solid Paired with a EWDMX Transmitter and receiving DMX data RED Solid Not paired with a EWDMX Transmitter FREE 28 SATURA SPOT LED PRO User Manual Ver 1 ELATION i ei LA www elationlighting com DMX CHANNEL FUNCTIONS AND VALUES ELATION SATURA SPOT LED PRO DMX Channel Values Functions VERSION 1 26 DMX Channels specifications are subject to change without any prior wr
16. anty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury to your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e he fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord e Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close to th
17. ding e Select Edit Program Press ENTER to confirm e Select Edit Scenes e Select desired scene numbers A maximum of 250 scenes can be programmed Press ENTER to confirm Press MODE ESC in order to return to the main menu 25 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continued Example Program 2 includes scenes 10 11 12 amp 13 Program 4 includes scenes 8 9 amp 10 Program 6 includes scenes 12 13 14 amp 15 Auto Pro Part 1 is Program 2 Auto Pro Part 2 is Program 3 Auto Pro Part 3 is Program 6 The 3 Slave groups run the Auto Program in certain time segments as shown in the following picture Part 1 e Semet samen soemetz Sonnets Part 2 ss m m 9 Part 3 26 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com INTERNAL WIRELESS DMX RECIEVER EWDMX The SATURA SPOT LED PRO is equipped with an internal Elation Wireless DMX Receiver which is fully compatible with an Elation Wireless DMX System WORKING WITH THE INTERNAL WIRELESS DMX EWDMX System Access the Wireless DMX sub menu from the PERSONALITY menu The Wireless DMX sub menu allows you to Activate turn ON the system Deactivate turn OFF the system or Reset CLEAR the EWDMX system When the EWDMX system is Activated the internal DMX IN XLR jacks are turned OFF H
18. dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s e Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the power cable 35 SATURA SPOT LED PRO User Manual Ver 1 EtATION www elationlighting com TECHNICAL SPECIFICATIONS FEATURES Motorized 14 32 Zoom and Focus RGBW Color Mixing and Color Macros Variable Color Temperatures Internal EWDMX Wireless DMX Receiver RDM Remote Device Management Flicker Free Operation for Broadcast TV and FILM SOURCE 300W LED Engine 60 000 Hour Average LED Engine Life EFFECTS 3 Facet Rotating Indexing Prism and Frost Filter High Speed Shutter and Iris Strobe 1 18fps Dimming 0 100 COLOR RGBW Color Mixing and Color Macros Variable Color Temperatures 2 700K 8 000K GOBOS Wheel 1 6 Rotating Interchangeable Gobos Wheel 2 7 Static Stamped Gobos CONTROL CONNECTIONS 3 DMX Channel Modes 20 22 26 6 Button Touch Control Panel RDM Remote Device Management Full Color 180 Reversible LCD Menu Display 16 Bit 3 Phase Motors 8 16 Bit Resolution Adjustable Movement 3pin and 5pin DMX In Out powerCON Power In SIZE WEIGHT Length 16 9 430mm Width 20 0 508mm Vertical Height 28 4 721mm Weight 65 0 Ibs 29 5 kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 450W Max Power Consu
19. e date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professionale shall have no liability what so ever for loss of or damage to any such accessories nor for the safe return thereof C This warranty is void if the serial number has been altered or removed if the product is modified in any manner which Elation Professional amp concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up During the period specified above Elation Professional amp will replace defective parts at its expense and will absorb all ex
20. e fixture while operating to prevent any fire hazard The fixture must be installed in a location with adequate ventilation at least 1 5 feet 5m from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT permit operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years fo come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than MIO x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the fixture Use the original packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare hand during its operation Turn OFF the power and allow approximately 15 minutes for the fixture to cool down before replacing Or serving 8 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com FIXTURE OVERVIEW l LED Assembly Microphone Wireless DMX Indicator DC Switch LCD Menu Function Display o e Se YS FY LEFT Button 7 DOWN Button 8 ENTER Button 9 RIGHT Button 10 MODE ESC Button 11 UP
21. ener SECURING Regardless of the rigging option you choose for your SATURA SPOT LED PRO always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable to a carrying handle 12 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels frorn fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a Y style connector The order in which the fixtures are c
22. ep MODE ESC button pressed for 3 seconds PERSONALITY Temp C F Define how fixture displays internal temperature Celsius or Fahrenheit 21 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com PERSONALITY Initial Status Create custom PAN TILT and Effect settings and save as a custom Horne Position PERSONALITY Wireless DMX WDMX OFF Deactivate the internal wireless DMX receiver PERSONALITY Wireless DMX Activate WDMX Activate the internal wireless DMX receiver PERSONALITY Wireless DMX Act amp Data Out Deactivate the internal wireless DMX receiver PERSONALITY Wireless DMX Clear WDMX Memo Reset and clear the internal wireless DMX receiver memory PERSONALITY Reset Default When ON all factory settings are restored RESET FUNCTION Reset ALL Reset ALL internal motors to Home Position RESET FUNCTION Reset PAN and TILT Reset only PAN and TILT motors to Home Position RESET FUNCTION Reset Gobos Reset only Gobo Wheels to Home Position RESET FUNCTION Reset Others Reset ALL other motors not associated previously listed commands to Home Position EFFECT ADJUST Test Channel oelect and auto test each individual channel function independently from the DMX control board EFFECT ADJUST Manual Control select and manually test and fine adjust each individual channel function Independently from DMX control board This function will center
23. g e Select Function Mode Press ENTER to confirm e Select Set to Slave Press ENTER to confirm e Select Slave 1 Slave 2 or Slave 3 Press ENTER to confirm Press MODE ESC in order to return to the main menu 2 Automatic Program Run e Select Function Mode Press ENTER to confirm e Select Auto Program Press ENTER to confirm e Select Master or Alone Press ENTER to confirm Press MODE ESC in order to return to the main menu 24 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Program continued 3 Program Selection for Auto Pro Part e Select Edit Program Press ENTER to confirm e Select Select Programs Press ENTER to confirm e Select Auto Pro Part 1 Auto Pro Part 2 or Auto Pro Part 3 and select which slave program is to be sent Selection Part 1 means that the Slave unit runs the same program as the master units Press ENTER to confirm Press MODE ESC in order to return to the main menu 4 Program Selection for Edit Program e Select Edit Program Press ENTER to confirm e Select Edit Program Press ENTER to confirm e Select the desired program With this function you can edit specific scenes into a specific program Press ENTER to confirm Press MODE ESC in order to return to the main menu 5 Automatic Scene Recor
24. horization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer Support 35 IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs 5 SATURA SPOT LED PRO User Manual Ver 1 ETATION i i ing Gs LA www elationlighting com 2 YEAR LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish th
25. ighting com ERROR CODES When power is applied the unit will automatically enter a Reset Test mode This mode brings all the internal motors to a home position If there is an internal problem with one or more of the motors an error code will flash in the display in the form of XXer were as XX will represent a function number For example when the display shows OEr it means there is some type of error with the Pan motor If there are multiple errors during the start up process they will all flash in the display For example if the fixtures has errors on Channel 1 2 and 5 all at the same time you will see the error message OTEr O2br and O5Er flash repeated 5 times If an error does occur during the initial start up procedure the fixture will self generate a second reset signal and try to realign all the motors and correct the errors If the error persists affer a second attempt a third attempt will be made If after a third attempt all the errors have not been corrected the fixture will make the following determinations 3 or More Errors The fixture cannot function properly with three or more errors therefore the fixture will place itself in a stand by mode until subsequent repairs can be made Less Than 3 Errors The fixture has less than 3 errors therefore most other functions Will work properly The fixture will attempt to operate normally until the errors can be correct by a technician The errors in question will rem
26. is the only written warranty applicable to Elation Professional Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published SATURA SPOT LED PRO User Manual Ver 1 ELATION i i dup www elationlighting com SAFETY INSTRUCTIONS The SATURA SPOT LED PRO is an extremely sophisticated piece of electronic equipment To guarantee a smooth operation it is important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections CAUTION Never touch the device during operation The housing may heat up CAUTION Never look directly into the light source as sensitive persons may suffer an epileptic shock CAUTION Keep this device away from rain and moisture CAUTION Unplug mains lead before opening the housing e For proper operation follow the Installation guidelines described in this manual Only qualified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warr
27. itten notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on the orientation of the fixture head MODE CHANNEL VALUE FUNCTION BASIC STAND eeo c fo Pe PAN MOVEMENT 8 BIT PAN Movement MN PAN FINE MOVEMENT 16 BIT LLL ES Fine Control of PAN Movement Ee TILT MOVEMENT 8 BIT TILT FINE MOVEMENT 16 BIT 0 255 Fine Control of TILT Movement RED LED 5 GREEN LED EE 0 255 O BLACK 255 100 GREEN BLUE LED O BLACK 255 100 BLUE MEM WHITE LED 0 255 O BLACK 255 100 WHITE SHUTTER STROBE DIMMER INTENSITY 0 255 Intensity O to 100 COLOR MACROS on NOFNCION 00000 o 2 WHE27oK S 3 WmE33xpK 4 WNRE439pK 5 WHEESiK 6 WHWE gK IE s O OT fl hh 29 SATURA SPOT LED PRO User Manual Ver 1 ELATION i i Er www elationlighting com ELATION SATURA SPOT LED PRO DMX Channel Values Functions VERSION 1 26 DMX Channels Specifications are subject to change without any prior written notice Rotation direction Clockwise or Counterclockwise of COLOR GOBO and PRISM effects depends on the orientation of the fixture head BASIC STAND EXTEND 190 255 Clockwise GOBO Wheel Rotation from SLOW to FAST IEEE ROTATING GOBO WHEEL INDEX ROTATION GOBO Indexing 11
28. krade Netherlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION IS Please check www elationlighting com for the latest revision update of this manual D t Soft aj ocumen sorware Channel Modes Version Version 2 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CONTENTS A 13 nn mn Fixture Overview Fixture Installation RN Bees nn s meot s 3 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable lighting fixtures on the market today The SATURA SPOT LED PRO has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the SATURA SPOT LED PRO by Elation Professional Every SATURA SPOT LED PRO has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arri
29. l period his counter can be reset INFORMATION Time Information LastRun Pass Display the fixture timer password 038 INFORMATION Time Information Clear Last Run Resets the last run time of the fixture INFORMATION Temperature Infor Head Temp Displays temperature of the fixture INFORMATION Software Ver Displays software version of the fixture PERSONALITY Status Settings Address Via DMX When ON define the desired DMX adaress via an external controller 1 Connect the fixture to the external controller and power ON 2 Set the DMX value of Channel 1 on the controller to 7 3 Set the DMX value of Channel 2 on the controller to 7 or 8 When set to 7 the DMX adaress can be set between 1 and 255 When set to 8 the DMX address can be set between 256 and 511 4 Using Channel 3 on the controller set the desired DMX address of the fixture Example 1 If the desired DMX address is 57 set Channel 1 to a value of 7 set Channel 2 to a value of 7 and then set Channel 3 to a value of 57 Example 2 If the desired DMX address is 420 set Channel 1 to a value of 7 set Channel 2 to a value of 8 and then set Channel 3 to a value of 164 25641642420 o After setting Channel 3 to the desired DMX adaress value wait for approximately 20 seconds for the fixture to complete the address reset function PERSONALITY Status Settings No DMX Status Define how fixture
30. minute from the last button press To shut OFF the LCD Menu Control Display immediately set Reset Default menu option to ON in the Personality menu and press the ENTER button to confirm your selection Wireless n ndecator DC Switch SATURA SPOT LED PRO 17 SATURA SPOT LED PRO User Manual Ver 1 ErATIONM www elationlighting com PROFESSIONAL ELATION SATURA SPOT LED PRO SYSTEM MENU VERSION 1 specifications and features are subject to change without any prior written notice MAIN MENU SUBMENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION DMX Address Setting FUNCTION Time Information INFORMATION Status Settings Stand By Mode Password 050 Auto High Low Fans Speed Select Display Setting ON OFF Display Reverse 1809 PAN XXX Reset Al O reset Al motors o ResetPanMi ResetPaw t O O O Reset Function fResstG amp ovs ________ ResetGobos ResetOhes Reset Other Motors PAN PAN XX LL HneAdusmens comte vanes M PAN XXX nn EI i i ETATION www elationlighting com PROFESSIONAL ELATION SATURA SPOT LED PRO SYSTEM MENU VERSION 1 Specifications and features are subject to change without any prior written notice MAIN MENU OPTIONS VALUES Default Settings in BOLD DESCRIPTION fiser Mode js Medie ride ueteres cavete User Defined Channel Assignment Edit User Mode Max Channel
31. mption 14 F to 1 13 F 10 C to 45 C APPROVALS RATINGS CE and cETLus Approved RoHs Compliant IP20 Rated INSTALLATION Rigging Clamps Not Included Working Position Flat Surface Inverted 180 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 36 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com GOBOS ROTATING GOBOS 0060 STATIC GOBOS S 4 PHOTOMETRIC DATA 14 Beam 2 5m 5m 7 5m MIN ZOOM m Distance 2 5 8 2 5 16 4 7 5 24 6 14 Beam Diameter 0 65 65 E AB 1 3 E AS s Sst Photometrics lux lux lux rik on ZTE LSS a wD 2480 230 650 60 GREEN 82 48 BLUE 66 6 WHITE 1054 v8 37 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com PHOTOMETRIC DATA continued v an Beam MAX ZOOM m Distance 1 hyi M 3 By 8 Photometrics lux lux lux FULL ON 83 wD 595 55 70 7 GREEN 1 031 96 BLUE 3 29 DIMENSIONAL DRAWINGS 16 9 430mm 11 2 285mm 17 8 451mm 23 1 588mm 310mm 410mm Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 38 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CIRCUIT SCHEMATICS Please Note Specifications
32. onnected in a DMX line does not influence the DMX adaressing For example a fixture assigned a starting DMX address of may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to adaress 1 to that fixture no matter where it is located in the DMX chain The SATURA SPOT LED PRO can be controlled via DMX 512 protocol and the DMX address is set via the control menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3pin or 5pin XLR connector for data input and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 13 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data o e 2 Data o e 3 Data 3 Data 4 Open 5 Open Be s
33. owever the internal DMX OUT XLR jacks will function normally If the fixture is powered ON with the internal EWDMX system Activated it will automatically scan for a wireless DMX signal from an Elation Wireless Transmitter If NO wireless signal is received it will electronically switch to the wired DMX mode WARNING NEVER connect a fixture to a controller via a DMX cable when the EWDMX system is in use This could cause serious damage to the controller SETTING UP THE EWDMX SYSTEM Follow the instructions included with the Elation EWDMX Transmitter and connect it to the output of your DMX controller To sync your fixture with the Elation EWDMX Transmitter follow the steps below Initially the EWDMX indicator on the fixture should be solid RED Press and hold the configuration button on your EWDMX Transmitter for about 3 seconds The RED GREEN LED indicators on the EWDMX Transmitter and the fixture should then begin to flash rapidly for about 5 10 seconds while the two systems pair Once the fixture is paired with the EWDMX Transmitter T1 the EWDMX status indicators on the both the fixture and the EWDMX Transmitter will stop flashing and glow solid GREEN If paring is unsuccessful repeat the process until paring is secured e The fixture will store the pairing information inside a nondestructive memory bank once a link is created between the fixture and an EWDMX Transmitter The fixture will remember the paired EWDMX Tr
34. penses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professionale under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional amp reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional amp be liable for any loss or damage direct or consequential arising out of the use of or inability to use this product G This warranty
35. rograms EDIT PROGRAM Edit Program Edit any of the 10 user defined internal Auto Programs EDIT PROGRAM Edit Scenes Edit any of the scenes of the internal Auto Programs EDIT PROGRAM Record Controller The fixture features an integrated DMX recorder by which you can transmit the programmed scenes from your DMX controller to the moving head Adjust the desired scene numbers via the encoder from to When you call up the scenes at your controller they will automatically be transmitted to the moving head 23 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com EDIT PROGRAM Record Controller Working With Built In Programs A Master unit can send up to 3 different data groups to the Slave units i e a Master unit can start 3 different Slave units which run 3 different programs The Master unit sends the 3 program parts in a continuous loop Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Auto Pro Part 1 Part 2 Part 3 Bd Part 1 Part 2 Part 3 a Part 1 Part 2 Part 3 The Slave unit receives data from the Master unit according to the group which the slave unit was assigned to If e g a Slave unit is set to Slave 1 in the menu Set to Slave the Master unit sends Auto Program Part 1 to the Slave unit If set to Slave 2 the Slave unit receives Auto Program Part 2 To start an Auto Program proceed as follows 1 Slave Settin
36. tarting DMX address is achieved by setting the correct DMX address on the digital display located on the back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture to a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the SATURA SPOT LED PRO when in the 26 Channel Extended Mode you should set the starting DMX address of the first unit to 1 the second unit to 27 1 26 the third unit to 53 27 26 and so on Note During start up the SATURA SPOT LED PRO will automatically detect whether a DMX data signal is being received or not If DMX data signal is being received the display will show AddrzXXX XXX representing the actual DMX address If the fixture is not receiving a DMX signal the display will flash If your fixture is connected to a DMX controller and the display is flashing not receiving a DMX signal please check the following he Spin or Spin XLR input plug cable with DMX
37. ure to follow the above figure when making your own cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to fhe ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the SATURA SPOT LED PRO The diagram below illustrates a typical DMX 512 connection when the fixture is in the 26 Channel Extended Mode You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR input and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 Cw 120 Ohms lt x DMX512 X DMX controller Address 53 Address 27 Address 1 14 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DA
38. ved intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS 2 Omega Brackets 1 3pin DMX Cable 1 powerCON Cable e 1 Safety Cable e Manual amp Warranty Card 4 SATURA SPOT LED PRO User Manual Ver 1 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting corn for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION The SATURA SPOT LED PRO carries a two year 730 days limited warranty Please fill out the enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return aut
Download Pdf Manuals
Related Search