VS-104 / VS-108 User`s Manual - L-com
Contents
1. a i os POWER WITCH POWER LED To PC v OUT TO MONITOR VIDEO IN Note 1 This product is not suitable for CGA EGA or Monochrome type monitors using a digital video signal 2 UL2919 rated cable is recommended for the best video quality VS 1048 07 11 02 Page 4 of 6 Installation Standalone Installation 1 Connect the video signal from the PC to the VIDEO IN port of the Video Splitter with a high density HD 15 cable 2 Connect the VIDEO OUT ports of the Video Splitter to the display monitors with high density HD 15 cables 3 Plug the Power Adapter into an AC source plug the Power Adapter cable into the DC IN socket on the Video Splitter s rear panel 4 Power on the Video Splitter Note A slide switch accessed from under the chassis is for Gain Control Slide it toward the front panel for High Gain longer distance operation and the other direction for Normal Gain shorter distance operation Caution Use DC 9V only Daisy Chain Installation Both the VS 104 and VS 108 are suitable for first or lower stage Daisy Chain installation 1 Connect the Video Splitter s VIDEO OUT port to any VIDEO IN port of the lower stage Video Splitter with a Male to Female HD 15 cable 2 Plug the Power Adapter into an AC source plug the Power Adapter cable into the DC IN socket on the Video Splitter s rear panel 3 Power on the Video Splitter 4 Adjust the Gain Control Slide Switches for optimum video signal 5 Repeat2. The direct vendor also reserves the right to revise or update device or documentation without obligation to notify any individual or entity of such revisions or update For further inquires please contact your direct vendor Products Introduction VS 1048 07 11 02 Page 6 of 6
3. steps 1 4 to Daisy Chain additional Video Splitters VS 1048 07 11 02 Page 5 of 6 Specifications O0 otm 4 High Density HD 15 Female 8 High Density HD 15 Female 200 MHz 1600x1200 70 Hz DC 9V 150mA max 11508 1200g Dimensions L x W x H Preventing Radio amp TV Interference WARNING This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause interference to radio communications It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures may be required to correct the interference Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FORM DIRECT INDIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT DISK OR ITS DOCUMENTATION The direct vendor makes no warranty or representation expressed implied or statutory with respect to the contents or use of this documentation and specially disclaims its quality performance merchantability or fitness for any particular purpose
4. VS 1048 Video Splitter VS 104 VS 108 User s Manual 07 11 02 Page 1 of 6 Packing Checklist m 1 VS 104 VS 108 Video Splitter m 1 DC 9V 300mA min Power Adapter m User s Manual Please read this manual thoroughly and follow the installation procedures carefully to prevent any damage to the AS 154P and or the devices it connects to Copyright 1997 Aten International Co Ltd Manual Part No PAPE 1033 400 Printed in Taiwan 09 96 All brand names and trademarks are the registered property of their respective owners VS 1048 07 11 02 Page 2 of 6 Introduction The VS 104 VS 108 Video Separator Splitter is a boosting device to duplicate the video signal from one source to 4 VS 104 or 8 VS 108 outputs and is ideal for any monitor using analog signals The VS 104 and VS 108 also extend the transmission distance up to 210 feet making them excellent for public broadcast systems To get multiple high quality VGA SVGA or Multisync video signals over long distances without hassle the VS 104 and VS 108 are your best choice Features One Video Input to 4 8 Video Outputs Transmission Distance 65m 210ft Suitable for SVGA VGA and Multisync Monitors Daisy Chainable Power Saving Mode Power LED Flashes to Indicate When Computer Is Off Supports one XGA or VESA DDC Port Video Out 1 VS 1048 07 11 02 Page 3 of 6 Front and Rear Views POWER SWITCH To Po yD oT TS MONITOR Video IN
Download Pdf Manuals
Related Search