Home
User Manual (PDF, April 2005)
Contents
1. Connect an end of the 9 pole cable supplied with the CCD camera to the relevant connector above the SCSI port of the HR IV front panel then connect the other end to the relevant connector on the CCD camera 22 DESCRIPTION OF THE HIRES PLATFORM FRONT PANEL HR IVPlus Front Panel On the HR IV and HR IV Plus platform front panel are the connectors for its connection to the CCD Camera and the PC Also there are 4 red LED s that allow vou to read the device status at anv moment NOTE On the HR IV Plus platform front panel there are even the cooling svstem input output gumplates IN OUT and the fiber optic link connectors TO PARALLEL TX RX described in a proper manual 23 Here below the description of the connectors common to the HR IV and HR IV Plus platform front panel Starting from the top part on the left vou can see the following connectors 24 9 pin connector for the control of the Peltier the shutter and the cooling fans of the CCD Camera AD high density 15 pin connector for the connection and the communication with the auxiliary devices such as filter wheel image intensifier focuser and so on manufactured by DTA SCSI type connector for the power supply and the data transfer from the CCD Camera to the platform PARALLEL high density 44 pin connector for the parallel communication at 32 bits Hurricane or 16 bits HiRes with the PC USER PORT 26 pin connector which is a programmable bidirectional paral
2. CUD HiRes IV Plus User Manual April 2005 Copyright 2005 DTA s r l All rights reserved The reproduction of any part of this manual is allowed only with the written authorization by DTA s r l The contents of this manual may be subject to changes without any warning DTA are not responsible for errors that may occur in this manual Revision 1 0 dated 04 04 2005 CONTENTS INTRODUCTION PERSONAL COMPUTER MINIMUM REQUIREMENTS PERSONAL COMPUTER RECOMMENDED REQUIREMENTS SCHEME OF THE INSTALLATION PROCEDURE CONNECTING THE FDL INTERFACE CARD TO THE PC LIBRARY amp FDL PCI INSTALLATION WINDOWS 96 WINDOWS ME WINDOWS 2000 WINDOWS XP LINUX WINDRIVER REGISTRATION CONNECTING THE HIRES CONTROLLER TO THE PC CONNECTING THE HIRES HEAD TO THE HIRES CONTROLLER DESCRIPTION OF THE HIRES PLATFORM FRONT PANEL DETAIL OF FRONT PANEL CONNECTORS 9 PIN CONNECTOR 15 PIN AD CONNECTOR SCSI CONNECTOR 44 PIN PARALLEL CONNECTOR 26 PIN USER PORT CONNECTOR HRIV PLUS CONTROLLER LIQUID FILLING OPTICAL WINDOW CLEANING SPECIFICATIONS INDEX INTRODUCTION HiRes 1s a cooled digital cameras series born to detect extremelv faint light emissions There are two versions the standard HiRes IV and the upgraded model HiRes IV Plus both of them made of two main components the head with CCD Double stage Peltier cooling svstem electronics and the controller that includes the power supply This series displavs KODAK and E2V Technologies sensors either ma
3. The helped procedure has finished the search of the driver files for the hardware peripheral Il diver della periferica trovato il sequente Di Periferica di input PCI stato trovato un driver per questa periferica Per installare il driver scegliere Avanti The peripheral driver that has been found is the following one PCI input peripheral Pe efa poi diverkfdl pct int A driver for this peripheral has been NEXT found out Click on Next to install the CANCEL driver a MA NAE Indietro aria BACK 13 5 When the PC ends to copy any file a window appears as a confirmation of the performed installation of the drivers necessary for the proper functioning Choose FINISH to end the installation Helped installation of the new hardware Finishing of the helped installation of the new hardware under progress Installazione guidata nuovo hardware Completamento dell Installazione guidata nuovo hardware In corso FLIL PLI Installazione del software della periferica completata Installation of the peripheral software completed To end the helped procedure click on Finish Fer terminare la procedura quidata scegliere Fine Indietro Annulla FINISH 14 WINDOWS XP Anv window refers to the OS written in ITALIAN The charts next to the images correspond to the explanatory notes translated into ENGLISH correspond to
4. 2 The PC will start to search for the most suitable driver to the peripheral As soon as it finds it a window like the one shown below will appear Click on Finish to end the installation installazione guidata nuovo hardware Completamento dell Installazione quidata nuovo hardware in corso Installazione del software completata per FOL PCI Finishing of the new helped hardware installation in progress Software installation completed for To close the helped installation choose End Per chiudere l installazione guidata scegliere lt Indietro Fine Annulla NEXT CANCEL FINISH 15 LINUX System Requirements Linux 2 0 31 or higher can be embedded Linux or Linux 2 4x An x86 processor Any 32 bit development environment supporting C such as GCC Installation 1 Insert the DTA SDK CD into your Linux machine CD drive or copy the downloaded file to your preferred directory 2 Change directory to your preferred installation directory your home directory for example I cd 3 Extract the file WDxxxLN tgz where xxx is the version number tar xvzf lt file location gt WDxxxLN tgz For example o From a CD tar xvzf mnt cdrom LINUX WDxxxLN tgz o From a downloaded file tar xvzf home username WDxxxLN tgz 4 Change directory to WinDriver this directory gets created by tar cd WinDriver NOTE From version 5 x and above this directory gets created by tar but in versio
5. AD RES AD reset AD CLK AD clock signal CCD CLK CCD general clocks L H instructs the reading of the low less significant 8 bits or high part most significant 8 bits of the 16 bit parallel bus SINO SIN1 selects the input to the AD DO D15 parallel data GND analog ground SO serial clock S1 serial data VDD 15V according to the CCD sensor this value can be modified VSS 15V according to the CCD sensor this value can be modified HIV 27V according to the CCD sensor this value can be modified NOTE The parallel data bus is at 16 bits if the camera being mounted 1s a Hurricane If the camera connected to the HR IV platform is a HiRes the parallel data bus is at 8 bits therefore in this case the Di pins marked with the are connected to the digital ground while those marked with the are connected to the analog ground NOTE the 5 28 35 46 and 62 65 pins are TTL compatible 26 44 PIN PARALLEL CONNECTOR 4 0 0 0 0 0 V 0 o 000 lt 35 DG 4 D9 5 DI _ RW 9 GND 10 GND _ DIO 5 10 4 5 D10 20 25 30 i D 2 B 3 6 DIS 7 ACK 8 16 DI 17 D4 18 20 GND 25 DI6 26 D19 27 D2 28 D25 29 D28 30 D3 31 D2 32 D5 33 D8_ 34 DU 35 D14 36 VCC 37 AM 38 GND 39 GND 40 D7 A DO 42 023 43 D26 44 D gt e DO D31 da
6. case of the PC please see the relevant instructions in the PC Handbook gt Choose a free PCI expansion slot Remove the relevant back cover by means of a screwdriver Insert the camera interface card into the expansion slot Please make sure that the card is properly and fast inserted Fix the card by screwing the relevant screw again gt Reassemble the PC case Turn the PC on once again The interface card installation has been completed CF3 ETA l Sam TATS xrasasi 8 4 diro0A reel Parag EI ud drrooA z r es riti 401 RAZAAAA 3333466 FDLPCI FIFO PN 03061601 C DTA 2003 ar races T NAS wi nie ja lata z F4 fii AzA A si seys Sit i AATARARANI tiblo n 335 ths ee ye eae MMOTFI TITT Leica lt x ci Mise Eker EREDI TENTARE een e ri i i FDL PCI interface card In case of a fiber optic link connection a dedicated FDL PCI is provided with the proper connectors LIBRARY amp FDL PCI INSTALLATION The installation of the library is always linked to the installation of the camera of course For this purpose you just need to install the PCI interface as well Let s analyse the sequence of operations to be carried out according to the different Operating Systems Once you turn the system on for the first time with the FDL PCI interface on you will be asked to specify where the available drivers are Follow the steps on the basis of your Operative S
7. file del driver Immettere il percorso dei file del driver Click on Next to start the search If you carry it out by a hardware peripheral Ricerca dei file di driver per la sequente periferica hardware floppy disc or a CD ROM insert one of them before choosing Next Periferica di input PCI PCI input peripheral Sar effettuata una ricerca del driver adatti nel database dei diver presente nel computer e nei percorsi facoltativi di ricerca specificati di seguito A search of the suitable drivers will be carried Per avviare la ricerca scegliere Avanti Se si effettua la ricerca su un disco floppy o su un out in the driver database CO ROM inserire il disco floppy o il CO ROM prima di scegliere Avanti Optional present at the PC as well Percorsi opzionali di ricerca searching paths as at the optional I Unit floppy searching paths herewith i Unit CD ROM Floppy unit specified If Specificare un percorso CD ROM unit Microsoft Windows Update Specify a path BACK lt Indietro Annulla CANCEL NEXT 4 As soon as the PC finds the right driver a window will appear the same as the one shown below Click on NEXT to continue the installation Helped installation of the new hardware Outcomes of the file driver search Installazione guidata nuovo hardware Risultati ricerca file del driver La procedura guidata ha terminato la ricerca dei file del driver per la periferica hardware
8. on Browse the B window will open please check if the open folder is D FDL_PCI_ DRIVER D represents the letter with whom the CD ROM reader is being identified Select the windrvr6 svs then click on Open If the C window appears click on OK and the PC will automatically finish the copy of the files Individua file 21 xi Cerca in SJ FDL PCI DRIVER l ex 8 windrvr6 svs Richiesta file E x Richiesta del file windrvr6 sys contenuto nel Junga DK Installation Disc AI Annulla Digitare il percorso del file quindi scegliere OK Copia file da Sfoglia ichi 3 Richiesta file x Nome file windrvr6 sys AeA Tico fle Nindivi6 sys windrvi6 s Annulla Richiesta del file mindrerb sys contenuto nel Jungo DE biz sla dara e Installation Disc i Digitare il percorso del file quindi scegliere OK Copia file da E FDL_PCI_DRIVER 6 Once you have finished to install the necessary drivers for the FDL PCI card and WINDRIVER check the correct installation of the two peripherals When you use WINDOWS 98 and WINDOWS ME you have to click on COMPUTER RESOURCES by means of the right key of the mouse A menu with different options will open click on PROPERTIES by means of the left key of the mouse A window with different sections will open click on PERIPHERAL MANAGEMENT and check if the two peripherals have been installed correctly see the image below When yo
9. on the PC interface follow the following steps Before making anv connection make sure that the PC and everv peripheral are switched OFF and the HR IV is not powered gt Connect the parallel cable supplied with a standard length of 2 5 mt to the parallel port on the HR IV front panel and to the interface card FDL PCI previously mounted on PC In case you have purchased the model with FOL connectors for the serial connection on optic fiber insert an end of an optic fiber cable into the TX connector of the HR IV and the other one into the RX connector of the FDL PCI then insert an end of an optic fiber cable into the RX connector of the HR IV and the other one into the TX connector of the FDL PCI NOTE the two vitric optic fiber cables mod 62 125 are optional and a length up to 4 Km is available upon request Warning once the platform has been installed make sure there are at least 2 cm of clear space behind the cooling fan showed by the red arrow in the figure on the right so that this can efficiently work CONNECTING THE HIRES HEAD TO THE HIRES CONTROLLER Before making any connection make sure that the HR IV is not powered gt Connect an end of the SCSI cable supplied with the CCD camera to the relevant connector on the HRIV front panel then connect the other end to the SCSI connector of the CCD camera NOTE the 64 pin connectors are only SCSI type the communication protocol being used is not SCSI
10. L WINDOW CLEANING P PERSONAL COMPUTER MINIMUM REQUIREMENTS PERSONAL COMPUTER RECOMMENDED REQUIREMENTS S SCHEME OF THE INSTALLATION PROCEDURE SCSI CONNECTOR SPECIFICATIONS W WINDOWS 98 WINDOWS ME WINDOWS 2000 WINDOWS XP WINDRIVER REGISTRATION 22 22 26 22 21 22 23 29 24 31 10 11 14 17 33 CUD S r l Viale Campania 23 56021 Cascina Pisa ITALY web site www dta it e mail sales dta it 34
11. R IV Selectable 12 14 16 bit for HR IV Plus SETTABLE GAINS 2 for HR IV 64 for HR IV Plus READ OUT SPEED up to 100 kpixel s for HR IV 2 Mpixe s for C3P INTERFACE FDL PCI 8 16 32 bit COOLING HR IV e Double stage PELTIER 50 C below ambient HR IV Plus e Double stage Peltier air stage 60 C below ambient e Double stage Peltier liquid stage 80 C below ambient CCD TEMPERATURE CONTROL 0 1 C OPTICAL WINDOW Fused Silica FILTER WHEEL External BACKFOCUS 17 5 mm MAX TOTAL NOISE 10 e MOUNT According to different sensors BINNING From 1 x 1 to 8 x 8 or arbitrary POWER SUPPLY 230V 50Hz MAX ABSORPTION 250 W for HR IV 31 700 W for HR IV Plus cooling system included WEIGHT HEAD 1 7 kg both of cameras CONTROLLER 8 kg for HR IV 17 5 kg for HR IV Plus DIMENSIONS 32 HEAD 130x130x160 mm for HR IV 130x130x103 mm for HR IV Plus CONTROLLER 250x150x308 mm for HR IV 483x187x345 mm for HR TV Plus INDEX 9 9 PIN CONNECTOR 15 15 PIN CONNECTOR 26 26 PIN USER PORT CONNECTOR 44 44 PIN PARALLEL CONNECTOR C CONNECTING THE FDL INTERFACE CARD TO THE PC CONNECTING THE HIRES CONTROLLER TO THE PC CONNECTING THE HIRES HEAD TO THE HIRES CONTROLLER D DESCRIPTION OF THE HIRES PLATFORM FRONT PANEL DETAIL OF FRONT PANEL CONNECTORS H HRIV PLUS CONTROLLER LIQUID FILLING I INTRODUCTION L LIBRARY amp FDL PCI INSTALLATION LINUX O OPTICA
12. ation Disc into the CD ROM E unit then choose OK Select OK to copy a file from a different origin like a floppy or a web server too Digital segnature not found Firma digitale non trovata 1 YES Insert the Disc Inserire il disco Inserire il compact disc con l etichetta Jungo Installation Disc nell unit CO ROM E quindi scegliere OF Scegliere OF anche per copiare file da un altra origine Amila come Un dischetto o un server di rete La firma digitale Microsoft contrassegna il software collaudato in Windows e garantisce che il software non ha subito modifiche dopo test Il software che sta per essere installato non contiene la firma digitale Microsoft Non quindi garantito il corretto funzionamento del software In Windows WinQriver Per cercare il software con firma digitale Microsoft visitare il sito Web di Windows Update all indirizzo bttp windowsupdate microsoft com Informazioni in lingua inglese per verificare la disponibilit Continuare con l installazione Ho Ulteriori formazioni a XI In order to look for the software with Microsoft digital signature click on the Update Windows Web at information provided in English to verify its availability Will you continue the installation VISTA CD CANCEL 19 5 After having pressed OK the PC will ask by opening the A window where the original file is located Click
13. e clic su Indietro per selezionare un altro driver o fare most suitable driver clic su Avanti per continuare to this peripheral AR Click on Back to e f Percorso del driver ic or i ni nie D AFDL POFEDL PCLINF SERI to continue CANCEL Driver path Annulla 5 As soon as the copy of the files is carried out a window will appear it is the evidence that the installation 10 of the drivers necessary for the proper functioning has taken place Click on Finish to end the installation Helped installation of the new hardware Installazione quidata Nuovo hardware FLIL FLI FDL PCI E Installazione del software necessario per la nuova Installation of the Re periferica hardware terminata necessary software FINISH for the new hardware peripheral being ended CANCEL Annulla dietro WINDOWS ME Anv window refers to the OS written in ITALIAN The charts next to the images correspond to the explanatorv notes translated into ENGLISH 1 Insert the FDL PCI card into the slot of the motherboard and turn the PC on As soon as the system gets started the PC will update the driver database and then a window like the one shown below will appear Insert the ViSTA CD into the CD ROM reader wait a few seconds to allow the reading of the CD Then click on Next Helped installation of the new hardware The following new hardware peripheral has been founded Installazione guidata Nu
14. ers for the FDL PCI card we need to record the files to make them work properly Insert the ViSTA CD into the CD ROM reader wait a few seconds so as to allow the PC to load the QUICK INSTALL menu OUDCK INSTAL Rew Operating System Windows 2000 XP All Rights Reserved 2 Once the PC has loaded the QUICK INSTALL menu click on VISTA The PC will start the installation of the necessary drivers by loading a window like the one shown below E FDL_ PCT _DRIVERSwdreg inf windrurb inf install Once you have installed the drivers and the ViSTA software restart the PC as on demand With reference to WINDOWS 2000 and WINDOWS XP OS please go on up to point 3 while to point 6 as far as any other OS is concerned 18 3 Once the restart has been performed the PC will inform you by a window like the one shown below that no digital signature was found for this software Click on Yes to continue the copy of the files Microsoft signature marks the software tested under Windows it guarantees the software from being modified after any performed test digital The software that is going to be installed does not include Microsoft digital signature So the proper functioning of the software under Windows is not guaranteed WinDriver 4 The PC will ask you to insert the disc labelled JUNGO INSTALLATION DISC insert the and click on OK Insert the compact disc labelled Jungo Install
15. indow like the one vou can see below Click on NEXT to go on with the installation Helped installation of the new hardware Installazione guidata nuovo hardware Installazione guidata nuovo hardware Questa procedura guidata consente di installare un driver di una periferica hardware This helped procedure allows one to install a driver of an hardware peripheral To continue click on Next NEXT Per proseguire scegliere Avanti CANCEL 4 Indieta Annulla 2 The PC will look for the most suitable driver to the peripheral it will ask if we prefer look for it by default or if we d rather choose the driver among a list of available drivers We recommend you to select LOOK FOR THE DRIVER SUITABLE TO THE PERIPHERAL RECOMMENDED and then press NEXT Helped installation of the new hardware Install driver hardware peripheral Installazione guidata nuovo hardware E Installa driver periferica hardware Un driver di periferica un programma che consente il funzionamento di una periferica hardware in un sistema operativo Click on Next to identify the driver files and complete installation A peripheral driver is a program that enables the functioning of an hardware peripheral in an OS the Questa procedura guidata consente di completare l installazione della periferica O Periferica di input PCI Perla nuova periferica sono richiesti file di driwe
16. input trigger signal GND ground RL00 RL31 by means of these pins it is possible to control some external relays 24 VDC IA Max NOTE the 2 6 11 15 and 20 24 pins are TTL compatible 28 HRIV PLUS CONTROLLER LIQUID FILLING First emplovment Open the expansion tank placed on the right external side of the controller and fill it with the liquid provided with the camera Press the START button and some other liquid comes in circle Take pressed the START button until the flow of the circulating liquid is constant no more liquid is pumped up from the tank and then close the expansion tank Press again the START button and the pump remain working because the internal pressure on the silicon tube is constant The expansion tank is fixed external with two screws M3 type but it can be freely moved if necessary To avoid inconveniences such as liquid leakage let move the expansion tank only before filling it Next applications Push START button for start up the pump The START button is connected with a manostat that block the liquid flow in case of pressure leak Cooling liquid composition The cooling liquid for HRIV Plus controller is composed by 50 distilled water 50 ethylene glycol ATTENTION Do not use silicone liquid 29 OPTICAL WINDOW CLEANING Both the optical window and the CCD cleaning are carried out in the clean room bv means of a 30 magnifving power microscope This procedure re
17. lel communication port In the top part on the right there are 4 red LED s whose function is to indicate the platform status Starting from the LED on the left they are POWER if ON this LED indicates the presence of the power supply voltage SELECT if ON indicates that the HR IV is active COOLER if ON indicates that the cooling system has been enabled EXPOSURE if ON this LED indicates that the CCD camera imaging is in progress DETAIL OF FRONT PANEL CONNECTORS In the following paragraph we will list the signals on the connectors pins of the HR IV platform front panel 9 PIN CONNECTOR e S1 S2 Shutter control CAUTION 65 Volts 1 e P1 P2 Peltier cell control 3 15A Max e Fl F2 Cooling fan control 12V 500Ma Max IS PIN AD CONNECTOR 1 BD 2 BD 3 BD5 4 BD4 5 BD3 _ Boi 8 BDO 9 INO 10 OUTO 6 BD2 17 VDC 12V e BD7 BD0 bidirectional port reserved for the manufacturer s own use e INO input from the aux device necessary for the handshake e OUT3 OUTO handshake outputs towards the aux device NOTE the pins from 2 to 13 are TTL compatible 29 5 CLAMP_ 6 SIGNAL SCSI CONNECTOR CKGND 3 CK GND TO STE H1 CCD CLK GAIN CCD a ee ee CD CLK o DMA DS a VDD _ VDD HIV HIV 65 7 GND I 67 CK GND clock ground digital CLAMP SIGNAL CDS signals STC signals that instruct the AD the start of the conversion
18. lenco dei diver disponibili permettendo di selezionare il driver desiderato NEXT CANCEL BACK cc 3 The PC will have to look for the most suitable driver to the peripheral and ask if you d rather do so automatically or choose it from a list of available drivers Choose the option Find the most suitable driver to the peripheral recommendable choice and then click on Next A search of the new drivers will be carried out in the driver database in the hard disc as well as in the following selected paths Click on Next to start the search Specify a path Helped installation of the new hardware Installazione quidata Nuovo hardware Sar effettuata una ricerca del nuovi diver nel database dei driver sul disco rigido e in tutti percorsi seguenti selezionati Scegliere Avanti per iniziare la ricerca I Unit floppy M Unit CD ROM Microsoft Windows Update BROWSE KW Specificare un percorso D SFOL_PCIDRIVER 4 NEXT Sfoglia CANCEL BACK TT lt Indietro Annulla 4 As soon as the PC finds the suitable driver a window will appear like the one shown below Click on Next to continue the installation Helped installation of the new hardware Installazione guidata Nuovo hardware Ricerca del file del driver per la periferica Search of the driver file for the FDIL FCI peripheral possibile installare il miglior driver per questa periferica You can install the i Far
19. moves anv dust which can otherwise bring about unmistakable marks on the image vou have taken In particular such spots increase as the focal ratio gets wider In other words an image may not show any mark at f 5 6 but it can be clearly noted at f 32 because of an obvious geometrical problem of projection Due to the shutter or elapsed time the external surface of the optical window may gather dirty particles that may be easily removed To perform such task we use a compressed air cylinder specifically designed for optical cleaning Be careful 111 There are similar products that instead of using compressed air use a liquefiable gas at ambient pressure it quickl assifies thus 66 hi triggering an air compressed effect You do not absolutely have to use these products they may give rise to heavy marks or rings on the windows itself A product we can recommend is DUST OFF provided by EDMUND OPTICS Thanks to DUST OFF or any other similar product it is very easy to get rid of any microparticles keep the shutter open for a few seconds by the camera control program and spray some air blast We kindly advise you against using cloths optical paper and cleaning liquids because the dirt will be only mixed up or even worse increased The risk is to finally damage the coating of the optical window itself 30 SPECIFICATIONS SHUTTER Electromechanical Exposure time from 0 01 s to 9999 s A D CONVERTER 16 bit for H
20. ns preceding 5 x the WinDriver directory does not get created by the extraction Therefore when working with versions preceding 5 x version 4 33 for example first create a directory e g WinDriver before proceeding with the installation mkdir WinDriver 5 Install WinDriver 16 a WinDriver make b Become super user WinDriver su c Install the driver WinDriver make install 6 Create a symbolic link so that you can easily launch the DriverWizard GUI WinDriver In s WinDriver wizard wdwizard usr bin wdwizard 7 Change the read and execute permissions on the file wdwizard so that ordinary users can access this program 8 Change the user and group ids and give read write permissions to the device file dev windrvr6 depending on how you wish to allow users to access hardware through the device 9 You can now start using WinDriver to access your hardware and generate your driver code Restricting Hardware Access on Linux CAUTION Since dev windrvr6 gives direct hardware access to user programs it may compromise kernel stability on multi user Linux systems Please restrict access to the DriverWizard and the device file dev windrvr6 to trusted users For security reasons the WinDriver installation script does not automatically perform the steps of changing the permissions on dev windrvr6 and the DriverWizard executable wdwizard 17 WINDRIVER REGISTRATION 1 After the installation of the driv
21. ovo hardware Windows can look for stata rilevata la seguente nuova periferica hardware and install the software able to support the hardware peripheral If an installation support was given together with the hardware peripheral please insert it and click on Next FLI Input Controller Windows in grado di cercare e installare il software che supporta la periferica hardware Se con la periferica hardware stato fornito un supporto di installazione inserirlo e fare clic su Avanti Scegliere l operazione da effettuare nno NEXT Specificare il percorso del driver propri avanzate Choose the operation CANCEL to be carried out Indietro Annulla 2 The PC will start to look for the most suitable driver to be copied onto the hard disc Once this operation 1s over a window like the one shown below will appear Click on Finish to end the installation Helped installation of the new hardware Installazione guidata Nuovo hardware FLIL FLI Installazione della nuova periferica hardware terminata Install the new hardware peripheral being ended FINISH 4 Indietro Ermulla 11 WINDOWS 2000 Anv window refers to the OS written in ITALIAN The charts next to the images correspond to the explanatorv notes translated into ENGLISH 1 Insert the FDL PCI card into the slot of the motherboard and turn the PC on The PC will automaticallv find the FDL PCI card and open a w
22. r Un diver di periferica un applicazione che consente il funzionamento della periferica hardware Per individuare i file di diver e completare l installazione scegliere Avant Choose the operation to be carried out This helped procedure allows one to complete the installation of the peripheral Look for a suitable driver to the peripheral recommended Visualize a list PCI input peripheral Scegliere l operazione da effettuare Cerca un driver adatto alla periferica scelta consigliata For the new peripheral driver files are asked A Visualizza un elenco dei driver noti per questa periferica per consentire di scegliere un driver specifico peripheral driver is an application that allows the functioning of the hardware peripheral BACK 12 Indietro Annulla Y _______ NEXT of well known drivers to this peripheral able to choose a specific driver CANCEL 3 Please insert the VISTA CD and close QUICK INSTALL menu in case it gets opened due to the CD autorun Then specify where the PC has to look for the driver Select the CD ROM reader and specify the following path D FDL_PCI driver D is the letter with whom the CD ROM reader is identified Then press NEXT Helped installation of the new hardware Identify driver file Installazione quidata nuovo hardware Digit the driver file path Search of the driver files for the following Individua
23. r with a liquid exchanger a glycol solution performing AT 80 C The liquid exchanger is directly connected to the freezer box placed within the controller The sensor cell is vacuum tight and contains a gas Nitrogen so that the customer doesn t need to keep a steady maintenance The camera system consists of the HEAD containing the CCD sensor and the CONTROLLER containing the power supply and the freezer box PERSONAL COMPUTER MINIMUM REQUIREMENTS e CPU Pentium II 1 GHz e 256 Mb of RAM e Microsoft Windows 98 ME 2000 XP or LINUX we tested the SuSE LINUX 9 0 version e PCI bus compliant 2 1 PERSONAL COMPUTER RECOMMENDED REQUIREMENTS e CPU Pentium IV 2 GHz or higher e 512 Mb RAM e Colour monitor 19 SCHEME OF THE INSTALLATION PROCEDURE When you use the camera for the first time you must install the library and the FDL PCI interface For this purpose please follow the procedure described in the next pages and schematized in the diagram below Turn the PC off Insert the FDL PCI interface in the proper SLOT Turn the PC on LINUX WINDOWS WINDOWS OS ask to you the DRIVER specify the directory within the provided CD Let install the DRIVER Let install ViSTA software Verify the configuration of the camera with CAMERA SELECT option CONNECTING THE FDL INTERFACE CARD TO THE PC To install vour FDL interface card do as follow Turn your PC off including any peripheral Remove the external
24. rked bv high definition small pixels lt 16 um or high sensitivity bigger pixels gt 20 um They belong to the front illuminated kind with thin indium electrodes able to raise the Quantum Efficiency in the case of shorter wavelengths or to the back illuminated type to make the most of the latest CCD technology Among the main application fields Biology Astronomy Spectroscopy RAMAN Spectroscopy Semiconductor Physics Plasma Physics and X Ray Physics A line completely devoted to Spectroscopy is available HiRes IV also includes the former Hurricane specs HiRes IV standard For the standard HiRes IV cameras we have appealed to sophisticated sampling and amplification techniques as well as to a 16 bit A D Converter to be fully exploited in their dynamics Furthermore the Double Stage Peltier cooling system allows to perform AT 50 C All cameras have been equipped with integrated peripherals such as parallel ports and timers allowing one to carry out a complete automation of one s experiment HiRes IV Plus The HiRes IV Plus is the upgraded model of HiRes IV It is equipped of three integrated peripherals able to run an MCP a LASER or other external devices Moreover it performs a better readout speed of HiRes IV up to 1 Mpixel second and higher AT below ambient temperature due to two different system cooling 1 Double Stage Peltier with an air exchanger performing AT 60 C 2 Double Stage Peltie
25. ta if the camera being controlled by the HR IV is a Hurricane all the 32 given bits are significant otherwise in case of a HiRes only the less significant 16 bits are significant REQ by means of this pin the platform starts the transfer request to the PC ACK response signal to the REQ signal from the PC AID by means of this pin it is indicated the presence of addresses or data on the bus R W indicates whether the operation to execute is a reading or a writing STB STROBE signal GND ground VCC 5V NOTE all signals are TTL compatible By means of this port it 1s possible to carry out a parallel connection between CCD Camera and PC ZT 26 PIN USER PORT CONNECTOR 000000000 00000 00000000 4 TACK 5 802 BS 7 RL00 8 RL11 9 RL30 10 GND 11 SYNI 12 EXTSHUT 13 BDO 4 BB SBS 19 SHUTTER 20 SYN2 _ A TRG 22 BD 23 BT 25 RIO 26 RIZZI BDO BD7 bidirectional parallel port SHUTTER shutter TTL output for the control of a second external shutter SYNO SYN2 synchronism signals for external use STC signal that instructs the AD the start of the conversion EXTSHUT by means of this signal the user can directly control the shutter by keeping it at 1 the shutter stays open otherwise it is closed TRG bidirectional pin for the trigger signals transmission from and to the camera TACK input from the camera that indicates that this has seen an
26. the explanatory notes translated into ENGLISH 1 Insert the FDL PCI card into the slot of the motherboard and turn the PC on As soon as the system gets started a window like the one shown below will appear Insert the ViSTA CD into the CD ROM reader close the Quick Install it may open due to the CD autorun Select the option Install the software automatically recommendable choice Then click on Next to continue the installation Helped installation of the new hardware This helped procedure allows one to install the suitable software to Installazione guidata nuovo hardware Installazione guidata nuovo hardware PCI input peripheral Questa procedura guidata consente di installare il software per If the peripheral is provided with a CD or an installation floppy disc insert it in the proper unit Periterica di input F LI Se la periferica dotata di un CD o un disco 22 floppy di installazione inserirlo nell apposita unit Choose one of the following options Install the software automatically recommendable choice Install by taking it from a list or a specific path for experienced users Scegliere una delle sequent opzioni Installa il software automaticamente scelta consigli Installa da un elenco o percorso specifico petenti esperti Per continuare scegliere Avanti lt Indietro Annulla
27. u use WINDOWS 2000 and WINDOWS XP you have to click on COMPUTER RESOURCES by means of the right key of the mouse A menu with different options will open click on PROPERTIES by means of the left key of the mouse A window with different sections will open click on HARDWARE and then on PERIPHERAL MANAGEMENT Then check if the two peripherals have been installed correctly see the image below 20 PERIPHERAL MANAGEMENT GENERAL Prop iet Sistema Generale Gestione periferiche Mostra periferiche per tipo E Computer Fa CD ROM aS Controller disco floppy Controller disco rigido HARDWARE PROFILES PERFORMANCES Profili hardware Frestazioni Mostra periferiche per connessione H Controller USE Universal Serial Bus EB DTA i 8 FDL PCI a Junga 3 Win Driver ey Mouse Periferiche di sistema cS Porte COM e LPT i Schede di rete fl Schede video H Schermi H Tastiera ra A ee di Proprieta Aqgiona Rimuovi PROPERTIES UPDATE CANCEL REMOVE PRINT The tests have been carried out with the following OS WINDOWS 98 SECOND EDITION WINDOWS 2000 WITHOUT SERVICE PACK WINDOWS 2000 WITH SERVICE PACK 3 WINDOWS ME WINDOWS XP WITHOUT SERVICE PACK WINDOWS XP WITH SERVICE PACK 1 21 CONNECTING THE HiRes CONTROLLER TO THE PC The connection procedure is common both for the standard HR IV and the HR IV Plus cameras To install vour hardware platform
28. ystem WINDOWS 98 Any window refers to the OS written in ITALIAN The charts next to the images correspond to the explanatory notes translated into ENGLISH 1 Insert the FDL PCI card in the slot of the motherboard and turn the PC on The PC will automatically find the FDL PCI card and open a window like the one shown below Click on Next to continue the installation Helped installation of the new hardware Installazione quidata Nuovo hardware Saranno cercati nuovi driver per FLI Input Controller New drivers will be looked for MA JET A Un diver di periferica un programma che permette a una periferica hardware di funzionare PCI Input Controller A peripheral driver is a program that allows an hardware peripheral to work properly NEXT CANCEL dietro Annulla 2 The PC will have to look for the most suitable driver to the peripheral and ask if vou d rather do so authomatically or choose it from a list of available drivers Choose the option Find the most suitable driver to the peripheral recommendable choice and then click on Next Choose the operation to be carried out Look for the most suitable driver to the peripheral recommendable choice Helped installation of the new hardware Installazione quidata Nuovo hardware Scegliere l operazione da effettuare lt Cerca il miglior driver per la periferica scelta iconsigliata TOTI CICCIO TURI Visualizzare un e
Download Pdf Manuals
Related Search
Related Contents
Exmark TTS20KAE483 Lawn Mower User Manual User Manual Dell C2660dn Statement of Volatility LIFETIME Aufbauanleitung Memphis BW AC Manual - pdf.lowes.com UC-7101/7110/7112 Series Powador XP500-OD-TL / XP550-OD-TL ECHOS COLOR iPAC 5070 user guide USER`S MANUAL Of AMD 770 Chipset & AMD SB710 Chipset Based Copyright © All rights reserved.
Failed to retrieve file