Home

1 - Hitachi

Contents

1. e Do not move the PDP TV during use Before moving disconnect the power plug and all external connections e You are advised to move the PDP TV with two persons e Avoid any impact or shock to the PDP TV particularly take care of glass screen Do not put anything on top of the Plasma Television Placing anything on the PDP TV could result in loss of balance or falling and cause an injury or damage Use special caution in households where children are present Avoid a humid or dusty place Placing the PDP TV in a smoke a highly humid dusty place oily soot or corrosive gas could result in fire or electrical shock Do not place near the kitchen a humidifier or other place where there is oil smoke or humidity Avoid a high temperature environment The heat could have adverse influence on the PDP TV and other parts and could result in transformation melting or fire Do not place the PDP TV the remote control and other parts in direct sunlight or near a hot object such as heater etc e Do not put the PDP TV in a place where the temperature is widely changing Remove the power cord for complete separation e For safety purposes disconnect the power cord if the PDP TV is not to be used for prolonged periods of time e Before cleaning turn off and unplug the PDP TV Neglect could result in fire or electrical shock PRECAUTIONS Installation environment Do not obstruct a ventilation hole Do not put the PDP TV on carpet or bla
2. 4 3 expanded 4 3Z 1 Scaling Select the screen sizes ek 4 3 Zoom2 Please see ASPECT on page 23 for more eee sandatd Re 1692008 4 3 expanded Select the screen sizes LH standard Available for 720p 1080i signals gens Black Border Color Setting Select the border color when display 4 3 video Gray Off Noise Reduction Provide 3 models for reducing video noise Level 1 Not available for YPsPp DTV signals Level 2 Level 3 3 2 Pull Down Improve ihe picture quality Disable Not available for YPgPr ATSC signals Enable PC Mode not available for DVI signal Image Function Options gt Automatically detects video format Auto Adjust Auto MISS not available for 480p 720p 1080i signals Clock Phase Video timing adjustment 0 to 31 Horizontal Clock Moves image left and right 0 to 100 30 OSD On Screen Display Adjusts the mute volume treble bass balance SRS WOW and Subwoofer of your sound Audio Function Options Mute Turns off the sound Enable or disable Volume Increases and decreases the level of sound 0 to 63 Treble Increases and decreases the level of treble 16 to 16 Bass Increases and decreases the level of bass 16 to 16 Balance Adjusts the left and right sound level 16 to 16 SRS WOW Turns SRS WOW function on and off On or Off Subwoofer Turns Subwoofer function on and off On or Off 2 SRS a aa S LL SRS WOW is an audi
3. BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS LOSS OF GOODWILL EXPENDITURES MADE OR COMMITTED FOR IN RELIANCE ON THE CONTINUATION OF THIS LICENSE AGREEMENT OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THE SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 8 NO FAILURE OF ESSENTIAL PURPOSE YOU AGREE THAT NO FAILURE TO REPAIR A DEFECT ERROR OR BUG IN THE SOFTWARE SHALL CONSTITUTE A FAILURE OF THE ESSENTIAL PURPOSE OF THIS LICENSE AGREEMENT Fran ais 9 CRYPTOGRAPHIC SOFTWARE THIS PRODUCT CONTAINS SOFTWARE DEVELOPED BY THE OpenSSL PROJECT INCLUDING CRYPTOGRAPHIC SOFTWARE WRITTEN BY ERIC YOUNG THE CRYPTOGRAPHIC SOFTWARE THE CRYPTOGRAPHIC SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED TO THE MAXIMUM EXTENT PERMITTED BY LAW IN NO EVENT SHALL THE OpenSSL PROJECT ITS CONTRIBUTORS HAL HED OR ANY OF ITS PARENT OR AFFILIATE COMPANIES BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL DAMAGES IN
4. Contrast Volume Treble Bass and Balance adjustment Press repeatedly to circle through the selections 5 PC button Press to switch directly to PC mode Press again to change between Analog RGB and DVI mode 6 VIDEO button Shortcut to access the composite video S video Y Cp Cr and Y Ps Pr mode Press repeatedly to circle through the selections 7 NTSC button Press to switch directly to the NTSC mode Also can press CH buttons to switch to NTSC mode 24 HOW TO USE THE REMOTE TO CONTROL YOUR PLASMA TV 8 DTV button Press to switch directly to DTV mode 9 NUMBER buttons Use Number buttons to choose specific channel For example when choose channel 27 first press 2 and then press 7 When choose 101 first press 100 and 0 then press 1 10 RETURN button Press this button to toggle between the current and last channel viewed and press jump back to last page of OSD 11 EXIT button This button will exit all On Screen Displays Francais 12 MENU button The MENU button will start the OSD 13 9 t u buttons Press Up Down Left Right buttons to adjust the options under OSD menu 14 SEL button Press SELECT button to select the functions under OSD menu 15 CHANNEL buttons Press Channel Channel buttons to change channels under TV mode 16 VOLUME buttons Press Vol Vol buttons to increase and decrease the volume 17 DTV MENU button Press to access DTV OSD menu for features adjustment
5. 15 Televisions are designed to comply with the recommended safety standards for tilt and stability Do not apply excessive pulling force to the front or top of the cabinet which could cause the product to overturn resulting in product damage and or personal injury 16 Follow instructions for wall shelf or ceiling mounting as recommended by the manufacturer 17 An outdoor antenna should not be located in the vicinity of overhead power lines or other electrical circuits 18 If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electric Code ANSI NFPA No 70 1984 provides information with respect to proper grounding for the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding connectors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode ANTENNA LEAD IN WIRE GROUND ANTENNA DISCHARGE UNIT NEC SECTION 810 20 ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS NEG SECTION 810 21 GROUNDING CONDUCTORS POWER SERVICE GROUNDING ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE Note to the CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC that prov
6. 18 BACK button for DTV mode only In viewing mode or in the Channel Banner toggles between the current and previous channel within the same channel list In the menu returns to the previous screen 19 OK button for DTV mode only In viewing mode brings up the current Channel List and the Channel Banner In the menu selects the currently highlighted menu item or confirms your choices 20 FAV CHANNEL button for DTV mode only Press to switch directly to your favorite channel 21 INFO button for DTV mode only Switch between Viewing mode Channel Banner and Channel Banner with Extended Info 22 PC ADJ button not available for 480p 720p 1080i signals When the image is not even or not in the center of the screen under PC mode press this button for auto adjustment 23 FREEZE button Freeze button allows user to temporarily pause current image Press to freeze the image Press again to restore the picture 24 C C button Press to switch directly to open close caption function 25 HOW TO USE THE REMOTE TO CONTROL YOUR PLASMA TV 25 ASPECT button Press repeatedly to change image to different aspects Aspects include 4 3 STANDARD 4 3 EXPANDED 4 3 ZOOM1 4 3 ZOOM2 16 9 STANDARD 16 9 ZOOM Depending on the input signal format received the picture format ratio allows you to adjust the images through the following options 4 3 STANDARD Use this aspect mode to display conventional 4 3 images Side panels gray area
7. Shield e Wide Viewing Angle More than 160 e 4 Color Temperature Presets Cool Natural Warm Black amp White and User e Multiple Screen Fill Modes 4 3 Standard 4 3 Expanded 4 3 Zoom1 4 3 Zoom2 16 9 Standard 16 9 Zoom 3D Y C Comb Filter e Picture Modes Natural Cinema and Dynamic Computer Display VGA SVGA XGA Inputs e Power Input AC 120V 60Hz e Antenna input impedance 75 Ohm e Channel coverage 191ch VHF Band tn ssc tone thal me M RE PS 2 13 UAIF Band 5eme coterie du Monte 14 69 CATV Mid Band A 5 A 1 A a Pa Me ey a eee Pe A l Super Band we ee Wiles ye act eee rsa pass M tr J W Hyper Band icity ceed bs ete hata W 1 W 28 Ultra Band ais s ate near W 29 W 94 Vid o ie cet eee eee ee ene 1 0Vp p 75 Ohm e S Video Luminance Y 1 0Vp p 75 Ohm Chrominance C 0 286Vp p 75 Ohm Component Video Luminance Y 1 0Vp p 75 Ohm Chrominance PB PR 0 7Vp p 75 Ohm e Audio input Impedance 47k Ohm e Average input level 470mVrms ROBES an era tee ASS 0 7Vp p 75 Ohm SDVED Sense ERA EN Es 24 PIN Outputs VITRO aed i acs RTL pers ee 1 0Vp p 75 Ohm SAUGIO eead pr Ea eee de ee 470mVrms 1k Ohm e Optical Out Digital Audio 1 Optical Connector Audio e Mono Ster
8. like to watch then press OK button NOTE Press Numeric Key to Select Digital Channel For the digital channel number is different with the traditional NTSC channel number Please follow below indication to select the digital channel if you prefer to use numeric key to do the channel selection Example digital channel number 10 2 1 press numeric key 1 and 0 2 press u buttons 3 press numeric key 2 39 CARE OF YOUR HITACHI PLASMA TELEVISION AND YOUR REMOTE CONTROL DO Dust the screen and frame with a cleaning cloth from the accessories pack Clean the screen and frame with a soft cloth moistened in warm water and dry with a soft cloth A mild soap may be used if the screen is extremely dirty Place your Plasma Television away from extreme heat humidity and extremely dusty places Remove the plug from the wall outlet if your Plasma Television will not be used for a long period of time for instance when you go on vacation DO NOT Do not clean your screen with strong cleaners polishes or a chemically treated cloth Do not place rubber or vinyl products or cellophane tape on your Plasma Television Avoid repeatedly touching the screen Do not subject the remote control to shocks such as dropping it on the floor etc This may cause physical damage to the precision parts Avoid placing the remote control in a high humidity place or getting it wet Do not leave it on or near a heater E
9. periods of illumination the brightness of the phosphor will be degraded to such extent that stationary images would burn in that part of the screen as grayed out images Tips to prevent such image retention are Do not display images having sharp brightness differences or hi contrast images such as monochrome characters and graphic patterns for long Do not leave stationary images appearing for long but try to refresh them at appropriate intervals of time or try to move them using screen saver function Turn down the contrast and brightness controls 9 _ Luminosity and contrast Plasma television has luminosity and low contrast compared with CRT television 10 Granular spots When a screen is seen at point blank range a random fine grain may be visible to a dark part 11 Disturbance to video apparatus If an apparatus VCR etc antenna line is arranged near the monitor the image may shake or disturbance may be received 12 Lip Sync There is some time lag between the picture and the sound You can see lip motion that is delayed compared to the sound 13 About the use environment of Electric discharge luminescence characteristic of the plasma display panel also changes with peripheral plasma television temperature temperature Moreover since there is also high power consumption value a specified temperature environment is required 14 Caution on prolonged storage Storing the plasma television for a period of more than 2 t
10. size style color and opacity of Closed Caption Caption Function Options Font Size Adjust the font size of Closed Caption Default Small Middle Large Font Style Adjust the font style of Closed Caption Default Style0 7 Font Color Adjust the background and foreground color of Closed Caption Background Foreground Font Opacity Adjust the background and foreground opacity of Closed Caption Background Foreground Default None Raised Depressed Edge Style Adjust the edge style of Closed Caption Uniform Drop_Shadow L Drop_Shadow R Edge Color Adjust the edge color of Closed Caption Default Gray Blue Red Green Cyan Yellow Dark Select the sound opacity l Plate time zone mode and check the hardware and software version Setup Function Options Sound Change the sound mode PCM Dolby Digital Opacity Change the percentage of the OSD s transparency 0 100 adjustment Plate Change the Information Plate display time 2 secs 4 secs 6 secs Off Time Zone Change time display format and adjust the time zone Time Format Time Adjustment About Check the hardware and software version Lock Ke E Rating Paseword Reset Dafauit Rating Control AN Bioek MPAA 6 PG PONS R NO 17 x All Unblock USTV iTy V G TV0 0000 to show three sub menus 3 Press control menu the lock symbol 5 Press aveo Tid A VMA amp Requires
11. 5 35 16 6 800 x 600 60 32 37 88 7 800 x 600 72 19 48 08 8 VESA 800 x 600 75 00 46 88 9 1024 x 768 60 00 48 36 10 1024 x 768 70 07 56 48 11 1024 x 768 75 03 60 02 12 1280 x 1024 60 02 63 98 13 1280 x 1024 75 03 79 98 14 1080i 1080 59 94 33 72 15 720p 720 59 94 44 96 16 480p 480 59 94 31 47 21 CONNECTING EXTERNAL SOURCES CONNECTING EXTERNAL AUDIO AMPLIFIER For monitor the audio level of the PDP TV to an external audio amplifier connect the system as below 1 Use a digital audio cable to connect the PDP s digital audio output jacks to the input jacks on the volume of the amplifier 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV OPTICAL OUT DIGITAL RF IN Service Terminal 2 DIGITAL AUDIO O STEREO SYSTEM AMPLIFIER 22 TIPS ON REAR PANEL CONNECTIONS e S VIDEO or Y PgPr connections are provided for high performance laserdisc players etc that have this feature Use these connections in place of the standard video connection if your device has this feature e If your device has only one audio output mono sound connect it to the left L audio jack on the TV e Refer to the operating guide of your other electronic equipment for additional information on connecting your hook up cables Connect only 1 component VCR DVD player camcorder etc to each input jack COMPONENT Y PgPr connections are provided for high performance components such as DVD players and set to
12. ARD provided by your cable operator is required to view encrypted digital programming Certain advanced and interactive digital cable services such as video on demand a cable operator s enhanced program guide and data enhanced television services may require the use of a set top box For more information call your local cable company e This product incorporates copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited consumer uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited SAFETY INSTRUCTIONS This PDP TV has been designed and manufactured to meet international safety standards but like any electrical equipment care must be taken if you are to obtain the best results and safety is to be assured Before using this product please read and understand the Safety Instructions thoroughly to ensure correct usage and follow all the instructions About the Symbols Various symbols are used in this manual the user s manual and on the product itself to ensure correct usage to prevent danger to the user and others and to prevent property damage The meanings of these symbols are described below It is important that you read these descriptions thoroughly and fully understand the contents This symbol indicates informat
13. CLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THE SOFTWARE OR THE CRYPTOGRAPHIC SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE 10 TERMINATION This License Agreement may be terminated at any time by HAL HED effective immediately upon notice to you 11 GOVERNING LAW SEVERABILITY This Agreement shall be governed and construed in accordance with the laws of the State of California without regard to its conflict of laws rules and any disputes hereunder shall be subject to the exclusive jurisdiction and venue of the U S Federal Courts in the Southern District of California If any part of this License Agreement is unenforceable the remainder shall be valid and binding to the maximum extent permitted by applicable law 49
14. HAVE A LOSS OF POWER PLEASE FOLLOW THIS PROCEDURE Press the POWER SWITCH ON OFF SWITCH once 2 If there is still no power wait 30 seconds and press the POWER SWITCH again 3 If there is still no power unplug the power cord from the wall Wait 30 seconds and plug the power cord back in Press the POWER SWITCH again This protective technology should provide for years of lasting entertainment from your HITACHI Television 42 PLUG and PLAY This Plasma Television complies with VESA DDC2B specifications Plug amp Play is a system with computer peripherals including monitors and operating system It works when the monitor is connected to a DDC ready computer that is running an operating system software that is capable for the plug amp play When a Plug and Play PC is powered on it sends a command to the Monitor requesting identification The Monitor sends back a string of data including its characteristics TRADEMARK ACKNOWLEDGMENT DDC is a trademark of Video Electronics Standard Association IBM PC AT and VGA are registered trademarks of International Business Machines Corporation of the U S A Apple and Macintosh are registered trademarks of Apple Computer Inc VESA is a trademark of a nonprofit organization Video Electronics Standard Association Fran ais This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations This Class B digital apparatus co
15. HITACHI Inspire the Next PLASMA TELEVISION Operating Guide for 42HDF52 IMPORTANT SAFETY INSTRUCTIONS csscsseesscssensensenseesensensessscenersensenneesenseanensecanonsense 1 6 FIRST TIME USE THE REMOTE CONTROL sesistssseactisssncdtecssansienereantesacdnasesaneasiensstscsetsevensscansesancousseanceuers 24 27 ON SCREEN DISPLAY is cieanannennnenenn ann ann reennneenntsenenienteenss DTV USAGE sonne annee iaraa Ta iai USEFUL INFORMATION As an Energy Star Partner Hitachi Ltd has determined that this Ti product meets the Energy Star guidelines for energy efficiency ENERGY STAR ENERGY STAR IMPORTANT SAFETY INSTRUCTIONS A SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI PLASMA TELEVISION Our reputation has been built on the quality performance and ease of service of HITACHI Plasma Televisions Safety is also foremost in our minds in the design of these units To help you operate these products properly this section illustrates safety tips which will be of benefit to you Please read it carefully and apply the knowledge you obtain from it to the proper operation of your HITACHI Plasma Television Please fill out your warranty card and mail it to HITACHI This will enable HITACHI to notify you promptly in the improbable event that a safety problem should be discovered in your product model Follow all warnings and instructions marked on this plasma television The lightning flash with arrowhead symbol wit
16. User s Guide 3 D SUB Mini 15 Pin Cable 8 Easy Graphic Guide 4 Audio Video Cable 9 Warranty Card 5 S Video Cables REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 1 Open the battery cover of the remote control by pressing the notched part of the cover BOTTOM VIEW Remote Control with your fingers and pulling the cover off 2 Insert two new AAA size batteries for the remote control When replacing old batteries push them towards the springs and lift them out 3 Match the batteries to the and marks in the battery compartment 4 Replace the cover Press and pull the back cover to remove CAUTION Danger of explosion if battery is incorrectly replaced Replace with the same or equivalent type HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION To take measures to prevent the Plasma Television from tipping over and prevent possible injury it is important to mount the unit in a stable place Securing to a wall Keep the Plasma Television four inches away from the wall except those hung to the wall mount bracket 10cm 4 inches or more NOTES 1 Do not block the ventilation holes of the Plasma Television Blocking the ventilation holes might cause fire or defect 2 If you purchased the wall mount bracket option please ask for professional installer Do not install by yourself Caution when moving the main unit As this product is heavy whenever it is moved two people are required to tra
17. a password to be entered to view movies and TV programs with unsuitable ratings for some viewers who share the TV 1 Press the DTV MENU button to display the MENU banner 2 Use the arrow keys t or u to move highlight LOCK and enter default password buttons to highlight the Rating and then press OK to into the rating 4 This menu lists both MPAA and USTV FCC Parental ratings You can independently lock the MPAA and TV ratings The locked ratings are indicated by andt u buttons and the OK button to activate the appropriate restrictions for either MPAA rating system or USTV FCC rating system 6 When it is complete even in processing you can press EXIT key to leave this window and enjoy watching DTV programs 1 When the rating locked channel has selected the program cannot be showed and you will get the message Program is rating blocked from TV screen 2 Explanation of the MPAA and TV FCC Rating Systems please check TV Guidelines Blocking and MPAA Rating on page 30 38 SETTING UP YOUR DTV Change Password To change password enter the Change Password Number option in CHANGE PASSWORD function press OK button to change password Enter four digital password in enter new password number And then confirm the password by entering the same password again NOTES 1 Before you change the password uses the default password 0000 to enter the Menu item which requires the password 2 If
18. able Provided This cable is used to connect a computer output to the D SUB input located on the rear panel of the Plasma TV The resolution should be set correctly to display the signal on the Plasma TV Subwoofer Cable This cable is used to connect an external audio component input to the subwoofer output of the Plasma TV 10 F Type 75 Ohm Coaxial Antenna Connector For connecting RF signals antenna or cable TV to the antenna jack on the television S Video Super Video Connector Provided This connector is used on camcorders VCRs and laserdisc players with an S Video feature in place of the standard video cable to produce a high quality picture tt DVI Cable This cable is stands for Digital Visual Interface Use for high quality PC Display te Optical Cable This cable is used to connect to an audio amplifier with an Optical Audio In jack Use this cable for the best sound quality ANTENNA CONNECTIONS TO REAR PANEL JACKS VHF 75 Ohm antenna CATV Cable TV When using a 75 Ohm coaxial cable system connect the outdoor antenna or CATV coaxial cable to the ANALOG FF terminal 75 Ohm and or DIGITAL RF terminal 75 Ohm Wie Paria 6 M ANALOG RF INI 4 TE DIGITAL RF IN Service Terminal VHF UHF ANTENNE ATSC ANTENNE Fran ais VHF 300 Ohm antenna UHF antenna When using a 300 Ohm twin lead from
19. accessories specified by the manufacturer Consult your dealer if you are in any doubt about installation operation or safety of your equipment e Other precautions Do not leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a stand by mode Switch off using the switch on the equipment and show your family how to do this Make special arrangements for infirm or handicapped people Disposal of this product may require specific instructions pertaining to your resident region Never guess or take any chances with electrical equipment of any kind it is better to be safe than sorry ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material REMOTE POWER CORD D SUB MINI 15 PIN AUDIO VIDEO S VIDEO CABLE CONTROL CABLE CABLE LES sh iE IL Ss i ey Ce lt i mm fm jm i 3 PAPAN 2 3 4 5 nI BATTERIES USER S GUIDE EASY GRAPHIC WARRANTY CARD f ss GUIDE sos B Fi Y J HITACHI NL 1 6 TA 8 9 CAUTION Ceiling mounting is not recommended Mounting the panel on the ceiling does not provide adequate ventilation for the electronics or proper support for the front glass panel This plasma television product is designed for a maximum tilting angle of 45 degrees from vertical 1 Remote Control Unit 6 Two AAA size 1 5V batteries 2 Power Cord 7
20. an outdoor antenna connect the VHF or UHF antenna leads to screws of the VHF or UHF adapter ANALOG RF IN Plug the adapter into the antenna terminal on the TV t mp To outdoor VHF or UHF antenna Adapter When both VHF and UHF antennas are connected Attach an optional antenna cable mixer to the TV antenna terminal ANALOG RF IN and connect the cables to the antenna mixer Consult your dealer or To outdoor antenna service store for the antenna mixer or CATVsystem To UHF antenna w t T Antenna Mixer 11 FRONT PANEL CONTROLS FRONT VIEW 42 PLASMA TV REMOTE CONTROL sensor Point your remote at this area when selecting channels adjusting volume etc POWER light indicator To turn the PDP TV ON press the main power button located on the BACK left side of the TV A red stand by indicator lamp located on the lower right corner of the front bezel will illuminate The PDP TV is now ready for remote on off operation Indicating Lamp Power Status Operating Off Off When the MAIN POWER is set OFF Lights Red Off Stand by When the MAIN POWER is set ON and the Front Key or Remote Control POWER is OFF Lights Orange Off Power Saving 1 When the MAIN POWER is set ON 2 No signal input no sync signal Analog RGB Only Lights Green On When the POWER is ON POWER button This power button is for power on the plasma television or change to standby mode CHANNEL select
21. and treaties The Software is licensed not sold 1 LICENSE GRANT Subject to all of the terms conditions and restrictions of this License Agreement HAL HED grants to you a limited revocable non exclusive right to use one copy of the Software only on one Hitachi labeled DTV owned by you 2 RIGHTS AND LIMITATIONS Software Not for Resale You may not resell or otherwise transfer for value the Software except that you may transfer the Software as part of a resale of the entire DTV product only Prohibition on Reverse Engineering Decompilation Disassembly and or Modification You may not reverse engineer decompile disassemble or modify the Software Separation of Components The Software is licensed as single product Its component parts may not be separated for use on more than one DTV No Transfers You may not transfer assign rent lease lend or in any way sublicense the Software Trademarks This License Agreement does not grant you any rights to any trademarks Third Party Software You shall not use the Software in combination with any third party software 3 VIOLATIONS INDEMNITY You understand that any use copying or transfer of the Software except as permitted pursuant to this License Agreement constitutes a violation of legal rights and may subject you to damages and an award to HAL HED of attorneys fees in connection with any violation of this License You further understand that you may be held legally responsible for
22. any copyright infringement or other violation of intellectual property rights that is caused or encouraged by your failure to abide by the terms of this License Agreement You agree to defend indemnify and hold HAL HED and its parent and affiliate companies harmless from and against any and all liability resulting from any breach by you of this License Agreement and or any use by you of the Software in combination with third party software 4 COPYRIGHT All title and intellectual property rights in and to the Software including but not limited to any images photographs animation video audio music text and applets incorporated into the Software and any accompanying printed materials are owned by HAL HED All title and intellectual property rights in and to the content which may be accessed through use of the Software is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties This License Agreement grants you no rights to use such content All rights not expressly granted are reserved by HAL HED This provision applies to U S Government end users who are granted only those rights expressly set forth herein 5 EXPORT RESTRICTIONS HAL HED is licensing the Software for use within the United States only You agree that you will not export or re export the Software You specifically agree not to export or re export the Software i to any country to which the U S
23. are subject to change without prior notice Please access www hitachi com tv for detailed specifications and dimensions for custom installations UltraVision Digital is a registered trademark of Hitachi Home Electronics America Inc WOW SRS and the symbol are trademarks of SRS Labs Inc WOW technology is incorporated under license from SRS Labs Inc Fran ais USEFUL INFO HITACHI To locate an authorized A nie content eed yo gr marne IW HITACHI 1 800 448 2244 Hitachi America LTD Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit However should you require service a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico Each facility will provide you with convenient and expedient assistance Our service hotline operator will direct you to the Hitachi Authorized Service Facility nearest you Just present proof of purchase and or delivery receipts to the Hitachi Authorized Service Facility and service will be rendered in accordance with the terms of the limited warranty as stated on your warranty card or operating guide Should you have any questions regarding warranty service operation or technical assistance please contact Hitachi America LTD Home Electronics Division 900 Hitachi Way Chula Vista CA 91914 3556 USEFUL INFO Hitachi Canada LTD Digital Media Division Should yo
24. background color when display Transparent Black SETTING UP THE TV CHANNELS Use the TV Channel Setup feature to set up your channels The Channel Auto Search scans TV Channel Setup channels 1 to 125 and adds the channels that return a signal You also can use the Channel Edit feature to add and remove channels that fit your preference Use the following steps to set up your TV channels 1 Press the MENU button on the remote control to bring up the OSD menu 2 Continue to press the button until the last icon System is highlighted and press the SEL button to show the system functions 3 Use the buttons to highlight the TV Channel Setup function and then press the SEL button to view the options 4 Select first icon TV Source to choose Air or CATV as your input source 5 Press the button once to highlight Channel Auto Search and then press the SEL button to begin the search Channels 1 to 125 are scanned and the channels that return a signal are added to your channel list 6 Press the EXIT button on your remote control to return to your TV display Use the following steps to add and remove channels 1 Press the MENU button on the remote control to bring up the OSD menu 2 Continue to press the button until the last icon System is highlighted and press the SEL button to show the system functions 3 Use the buttons to highlight the TV Channel Setup function and then press the SEL button to view the options 4 Press t
25. ect the HDTV source device using the appropriate cable pair in the following order of preference DVI cable and audio cable OR Component cable and audio cable 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the button corresponding to the appropriate signal source DVI or Component Video YCgCr YPsPr Antenna output 16 CONNECTING EXTERNAL SOURCES CONNECTING A TV CABLE BOX OR SATELLITE RECEIVER 1 Connect the TV Cable Box or Satellite Receiver device using Component cable and Audio cable OR S Video cable and Audio cable OR Composite cable and Audio cable 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the button corresponding to the appropriate signal source Component Video YCgCr YPsPr S Video or Composite Video Fran ais Satellite antenna cable TV GABLE FOX 17 CONNECTING EXTERNAL SOURCES CONNECTING A DVD PLAYER 1 Connect the DVD player using Component cable and Audio cable OR S Video cable and Audio cable OR Composite cable and Audio cable 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the button corresponding to the appropriate signal source Component Video YCgCr YPsPr S Video or Composite Video COMPONENT CABLE 18 CONNECTING EXTERNAL SOURCES CONNECTING A VCR 1 Connect the VCR player using S Video cable and Audio cable OR Co
26. ee E 3 Press OK button when the message Add channe and press Enter to add AGE nent channel has shown LUCILE Fr it Emil t Add ihi i art O O 1 1 4 If the ATSC signal is found and locked the Status will show message Get No Manual Sean XX 8VSB channel success Then you can press EXIT to leave the menu page and Eor an i J watch the program or go ahead scanning the other channels 5 If the signal is not locked the status will show Got No Channel You can scan the signal again or refer to the signal level bar Signal for aligning the direction of the antenna to get the signal Chine We signal AE 6 When the signal is locked and the receiver is on the channel you can enter into this page to check the signal level 1 On the Channel menu page select the first item EDIT 2 Press andt u buttons to highlight the channel s BLOCK or FAV control column and press OK to block channel or copy channel into the favorite channel list F1 3 After the edit setting press the EXIT button then will pop up a confirmation GH MG HANDL HAMI og h window choose NO to cancel the edit change choose YES to save the edit settings A Give changed te Ciababater TER I Note When the blocked channel has selected the program can not be showed and you will get the message Channel is blocked from TV 37 SETTING UP YOUR DTV Adjust the font
27. eo SAP SRS Dolby Digital e 10W 10W e Mute 45 Supplied Accessories e Remote Control e Batteries e D Sub Cable e S Video Cable e AV Cable e Power Cable e User s Guide e Easy Graphic Guide e Warranty Card Optional Accessories e Wallmount INPUTS OUTPUTS s Gomponent Y PB Phi arias e aiea 1 RGB Analog Input 20 0 eee eee eee enee eee eeseseeeeeeeeaeeeee teeta 1 DVISDigttal NPU sssrinin nent nent 1 e Composite Video 1 S Vid o rien ete awed Manes 1 e Antenna RF Inputs 2 NTSC ATSC AUGIO INPUT iret ta vane Macnee ten aes 4 AUGIO QUU ie hic cea ma ea te UE Andre se teams tren te 1 TV Vid o OUTPUT ss hunter 1 e Subwoofer Output 1 e Optical Out Digital Audio 1 SPECIFICATIONS e Multi Scanning 0 eee 32 70kHz h 50 85Hz v s Pikol Pithi nanna 0 90 horiz x 0 51 vert mm ECC ClaSS aeaee erai B for Consumer Use e Power Requirements a se AC 108 132V 60Hz e Power Consumption at standby DIMENSIONS e Width 1036 mm e Height 771 mm with stand 713 mm without stand e Depth 300 mm with stand 121 mm without stand e Weight 46Kg with stand 41 5Kg without stand Screen mode availability varies by input format HDTV Monitors display HDTV when combined with an HDTV Tuner and Source All specifications weights and dimensions
28. ers the available channels must first be scanned and memorized Initial Screen Prete Mena bey and then select A i 2 A hanna b NAA AUS MANU BiA The first time the receiver is powered on You will see a message block of Press Menu key and then select Channel to run Auto Manual Scan i F2 1 Press the DTV MENU button to display the MENU banner A Caption Se Setup Leck 2 Use the arrow keys t or u to move highlight CHANNEL and enter default Piwra el password 0000 to show three sub menus gs 3 Press or buttons to highlight the AUTO SCAN and then press OK to lunch an ce the auto scan An AUTO SCAN window will shows the SCAN status 5 de uno Dean Manual Scan Auto Senn 4 Once the digital TV signal is scanned the channel number and program name will be shown on the Scan List 5 Scanning will end up on channel 69 when it is complete even in processing you can press EXIT key to leave this window and enjoy watching DTV programs T hka und Aube Bom cempiete Prose thlanus kay be asii 36 SETTING UP YOUR DTV 1 On the Channel menu page select the third item MANUAL SCAN Edit Auto Scan Manuali Azan 2 Presst oru to highlight the input column Then press numeric buttons to input the channel number The channel frequency will be automatically showing on right side of the input column Menus Goan orr an Fran ais Ghanna We Fi Prag e
29. es causes loss of contrast in the picture e PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS This monitor has been designed pursuant to the FCC class B Rules This is to prevent a problem to Radio receivers If this monitor causes a problem to Radio receivers then take the following steps Keep the monitor away from Radio Adjust Radio antennas in order for the monitor not to receive interference The antenna cable of Radio should be kept away from the monitor Use a coaxial cable for antenna You can check if this monitor influences Radio receivers by turning off all other equipment other than the monitor If you find a problem receiving Radio when using the monitor check the instructions mentioned above e The display image appears scrolling diagonal e Text displayed across the screen appears vertically streaked with the characters in vertical columns blurred e Adjust the horizontal clock and clock phase Adjust the horizontal clock first the clock phase next RGB input e Text displayed across the screen appears blurred e A fine pattern flickers when displayed on the screen e Adjust the clock phase for the clearest viewing RGB input e Vertical stripes appear depending on the screen contents e The plasma display panel is lighting the phosphors by the discharge of internal radiation Depending on the screen contents in rare cases this may cause vertical stripes to appear because of fa
30. for the monitor not to receive interference The antenna cable of Radio should be kept away from the PDP TV Use a coaxial cable for antenna You can check if this PDP TV influences Radio receivers by turning off all other equipment other than the monitor If you find a problem receiving Radio when using the PDP TV check the instructions mentioned above e Precautions for the cable connection Do ensure that all connections including the power plug extension leads and interconnections between the pieces of equipment are properly made and in accordance with the manufacturers instructions Switch off and withdraw the power plug before making or changing connections Confirm the connector is fixed tightly when the signal cable is connected Also confirm the screws on the connector are tightened Plug the power cord of the PDP TV into a different socket from that for other equipment such as Radio etc Use a plug with ground terminal and make sure that it connects to the ground e Precaution during transportation Please pay attention when you transport this PDP TV because it is heavy Furthermore use the original carton box and its packaging materials when the PDP TV is transported Failure to transport the monitor in any carton except the original carton may result in damage to the PDP TV Save the original carton box and all packing material Do not physically impact the remote control A physical impact could cause damage o
31. has embargoed or restricted the export of goods or services which currently include but are not necessarily limited to Cuba Iran Iraq Libya North Korea Sudan and Syria or to any national of any such country wherever located who intends to transmit or transport the Software back to such country ii to any person or entity who you know or have reason to know will utilize the Software in the design development or production of nuclear chemical or biological wepons or iii to any person or entity who has been prohibited from participating in U S export transactions by any federal agency of the U S government You warrant and represent that neither the Bureau of Export Administration BXA nor any other U S Federal Agency has suspended revoked or denied your export privileges 6 NO WARRANTIES THE SOFTWARE IS PROVIDED AS IS WHERE IS HAL HED MAKES NO WARRANTIES OF ANY KIND WHATSOEVER REGARDING THE SOFTWARE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW HEREBY EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND WHATSOEVER EXPRESS OR IMPLIED WITH RESPECT TO THE SOFTWARE ALL IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF NON INFRINGEMENT MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY DISCLAIMED TO THE MAXIMUM EXTENT PERMITTED BY LAW 48 END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE 7 LIMITATION OF LIABILITY INNO EVENT SHALL HAL HED OR ANY OF ITS PARENT OR AFFILIATE COMPANIES
32. he button until Channel Edit is highlighted 5 Use the number buttons to select a channel to add or erase 6 Use thet u buttons to highlight Add or Erase Press the SEL button to add or erase the current channel 7 Press the EXIT button on your remote control to return to your TV display TV Channel Setup Function Options TV Source Select your TV input source Air CATV Channel Auto Search Automatically search scan TV channel from 1 to 125 Auto Channel Program Memorize channel Channel Edit To add or erase the channel Erase Add 34 ATSC Advanced Television System Committee INTRODUCTION Terrestrial broadcast is a traditional way of watching TV programs simply by installing an outdoor YAGI antenna or an indoor rabbit ear antenna plugging it into the TV set s tuner tuning channel then you can enjoy watching the programs However they are all so called analog TV In recent years digital TV arises and most countries governments have begun to mandate a TV Transition from the old analog TV broadcast system to digital TV broadcast system Digital TV brings viewer greater entertainment in terms of a noise free High Definition picture quality and Dolby AC 3 sound effect 16 9 video format gives a wider view of the same program compared with traditional 4 3 format In the near future terrestrial data broadcast will create a complete digitized world in every family Many terrestrial TV broadcaster at this m
33. hin an equilateral CAUTION triangle is intended to alert the user to the presence of RISK OF ELECTRIC SHOCK uninsulated dangerous voltage within the product s enclosure DION OC SN that may be of a sufficient magnitude to constitute a risk of electric shock to persons Fran ais WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK The exclamation point within an equilateral triangle is intended to DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE alert the user to the presence of important operating and CAUTION NO USER SERVICEABLE PARTS INSIDE maintenance servicing instructions in the literature REFER SERVICING TO QUALIFIED SERVICE PERSONNEL accompanying the appliance WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS PLASMA TELEVISION TO RAIN OR MOISTURE THE PLASMA TELEVISION SHOULD NOT BE EXPOSED TO DRIPPING OR SPLASHING AND OBJECTS FILLED WITH LIQUIDS SUCH AS VASES SHOULD NOT BE PLACED ON THE TELEVISION NOTE Model and serial numbers are indicated on back side of the Plasma Television CAUTION Adjust only those controls that are covered in the instructions as improper changes or modifications not expressly approved by HITACHI could void the user s authority to operate the Plasma Television MODIFICATIONS The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi America Ltd Home Electronics Division may v
34. ides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical This product contains lead Dispose of this product in accordance with applicable environmental laws For product recycling and disposal information contact you local government agency or the Electronic Industries Alliance at www eiae org in the US or the Electronic Product Stewardship Canada at www epsc ca in Canada For more information call 1 800 HITACHI Do not place any objects on the top of the television which may fall or cause a child to climb to retrieve the objects PREVENTION OF SCREEN BURN Continuous on screen displays such as video games stock market quotations computer generated graphics and other fixed nonmoving patterns can cause permanent damage to television receivers Such SCREEN BURNS constitute misuse and are NOT COVERED by your HITACHI Factory Warranty PUBLIC VIEWING OF COPYRIGHTED MATERIAL Public viewing of programs broadcast by TV stations and cable companies as well as programs from other sources may require prior authorization from the broadcaster or owner of the video program material e This digital television is capable of receiving analog basic digital basic and digital premium cable television programming by direct connection to a cable system providing such programming A CableC
35. ienced radio television technician for help Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hitachi Home Electronics America Inc may void the user s warranty Cables Connections to this device must be made with shielded cables with metallic RFI EMI connector hoods to maintain compliance with FCC Rules and Regulations Any cables that are supplied with the system must be replaced with identical cables in order to assure compliance with FCC rules Order Hitachi spares as replacement cables Declaration of Conformity This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation For questions regarding this declaration contact Hitachi America LTD Home Electronics Division 900 Hitachi Way Chula Vista CA 91914 3556 Tel 1 800 448 2244 1 800 HITACHI ATTN CUSTOMER RELATIONS 44 USEFUL INFO Features e New Easy to Use On Screen Menu Control 3 Language FilmMode Processing with 3 2 amp 2 2 pull down e Integrated ATSC Tuner e Adjustable Color Temperature e PIP e Picture Enhancement e Input Signal Identification e Noise Reduction Video e 1024 x 1024 Display Resolution e High Contrast Pure Color Glass
36. ifferent from that of the periphery etc Some pixels will always be on or always off Please note that this is not a malfunction 4 Picture Image Spectrum When receiving still picture signals e g channel number indication or clock indication for a while you can see image like when the picture varied This is not a defect 5 Display panel surface The plasma display panel is lighting the phosphors by the discharge of internal radiation In some cases this may temperature is too high cause the temperature of the panel surface to increase Please note that this is not a malfunction The Plasma TV surface temperature is higher than a Cathode ray tube 6 _ Plasma Surface The plasma display panel is made from glass Heavy shock on the front panel might damage it 7 Transportation When the plasma television is transported horizontally the glass panel has the possibility of being broken or increasing the picture defects At the time of transportation horizontal style is prohibited More over please treat the plasma panel with great care because of a precision apparatus Please instruct transporters so that it should be put into the packing box at the time of shipment There is a possibility that breakage of the panel or defects will increase Rough transportation might cause damage to the panel and pixel failure 8 image retention The plasma monitor illuminates phosphor to display images The phosphor has a finite illumination life After extended
37. ilure to light Please note that this is not a malfunction e Coarse horizontal stripes appear in FULL display e Adjusting the clock phase will reduce the horizontal stripes RGB input e The display dims to make the picture invisible during special playback of a VCR FF REW e This condition may occur when the unit is connected to a VCR with component output such as 480i but it is not a failure But when it occurs switch to composite output 41 Fran ais USEFUL INFORMATION ee samiokpiuepor leleleleeele ____rrueorsumpor e lelelelee le Pictrebures ojojoj nesorsreaspicwe lelelelele ___ Poorrecepton on some charnes 1e ee Pictrerotsvertcaty le jel TT TT woe jejelele le Porje jejejeje jeje TROUBLESHOOTING Updated 06 2007 Your HITACHI Television incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges Note A Power Surge can also relate to Power Interruptions or momentary black outs most often noticed when the lights dim or blink in the home Due to the incorporation of sophisticated electronics a rapid on off of the AC power can cause internal communication glitches when can make the Television appear to have locked up IF YOUR TELEVISION SHOULD APPEAR TO
38. ion that if ignored could possibly result in personal injury or even death due to incorrect handling N WARNING This symbol indicates information that if ignored could result possibly in personal injury or physical damage due to A CAUTION incorrect handling Typical Symbols Fran ais This symbol indicates an additional warning including cautions An illustration is provided to clarify the contents This symbol indicates a prohibited action The contents will be clearly indicated in an illustration or nearby the symbol to the left indicates that disassembly is prohibited oe This symbol indicates a compulsory action The contents will be clearly indicated in an illustration or nearby the symbol to the left indicates that the power plug should be disconnected from the power outlet Never use the Plasma Television if a problem should occur Abnormal operations such as smoke strange odor no image no sound excessive sound damaged casing elements cables penetration of liquids or foreign matter etc can cause a fire or electrical shock lsconneci ttie In such case immediately turn off the power switch and then disconnect the power plug from the power outlet After making sure that the plug from the smoke or odor has stopped contact your dealer Never attempt to make repairs yourself because this could be dangerous power outlet i Do not insert liquids or foreign objects Penetration of liquids or foreign object
39. ith unsuitable ratings for some viewers who share the TV See Setting up the V chip on page 30 Closed Caption Displays text See Setting up the Closed Caption on page 31 TV Channel Setup Choose a TV source performs an automatic channel search add and delete channels TV Source Air or CATV Channel Auto Search Scans channels 1 to 125 for a signal and Add or erase channel See Setting Up The TV Channels on page 31 System Reset Sets OSD back to default settings PC Mode System Function Options Signal Format Displays RGB signal information PIP Set Adjust the PIP source position audio source and display Size Off Small Medium Large Source AV SV TV DTV Position Nine different positions Audio Source Select between the sound of your main picture or PIP PIP Display Adjust the brightness contrast and saturation Advanced Adjusts the white pattern and gamma Gamma 0 8 1 0 1 2 or 1 4 Move Screen Mode Off Mode 1 or Mode 2 Move Screen Time 5 255 sec Power Save Turns Display Power Management System on and off On or Off System Reset Sets OSD back to default settings 32 SETTING UP THE V CHIP V Chip The V chip feature requires a password to be entered to view movies and TV programs with unsuitable ratings for some viewers who share the TV Follow these steps t
40. le Supports NTSC TV system Y P8Pr Y CeCr Audio Input Connect audio for Component input if you have mono sound insert the audio cable into the left L audio jack S VIDEO Audio Input Connect audio for S Video input if you have mono sound insert the audio cable into the left L audio jack COMPOSIT Audio Input Connect audio for Composite input if you have mono sound insert the audio cable into the left L audio jack Y PBPR Y CBCR Inputs Provide Y PBPR Y C8CR jacks for connecting equipment with this capability such as a DVD player or Set Top Box 13 Francais REAR PANEL JACKS S VIDEO Inputs Provide S VIDEO Super Video jacks for connecting equipment with S VIDEO output capability COMPOSITE VIDEO Input By using the VIDEO button of the remote control you can select Composite video source Use the audio and video inputs to connect external devices such as VCRs camcorders laserdisc players DVD players etc if you have mono sound insert the audio cable into the left L audio jack AUDIO Output These jacks provide fixed audio signal which are used for recording TV VIDEO Output This jack provides video signals NTSC DTV which are used for recording Composite VIDEO S VIDEO Component signal Analog RGB and DVI inputs do not have TV VIDEO output ANALOG RGB DVI Audio Input Connect audio for ANALOG RGB or DVI input SUBWOOFER Output Connect this SUB WOOFER OUT output to the exter
41. mplies with Canadian ICES 003 Cet appareil num rique de la classe B est conforme a la norme NMB 003 du Canada Cable Compatible Television Apparatus T l vision cablocompatible Canada NOTE This Plasma Television will display television closed captioning cc or o in accordance with paragraph 15 119 of the FCC rules 43 USEFUL INFO AGENCY REGULATORY INFORMATION Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an exper
42. mposite cable and Audio cable 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the button corresponding to the appropriate signal source S Video or Composite Video Fran ais 19 CONNECTING EXTERNAL SOURCES CONNECTING A AUDIO RECEIVER For improved sound quality you may want to play the audio of the PDP through your stereo system 1 Use an audio cable to connect the PDP s audio output jacks to the line input jacks on the A V receiver 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the MENU to display the menu then press to select Audio 5 Press SEL then presst u to select subwoofer and presst u to select On Off A RECEWER 20 CONNECTING EXTERNAL SOURCES CONNECTING PC 1 Connect the PC using D Sub cable and 35mm Audio cable OR DVI cable and 35mm Audio cable 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 Press the button corresponding to the appropriate signal source Analog RGB or DVI Fran ais This Plasma Television can automatically defect and display the signal format below Recommended Signal List Signal Mode No i Vertical Horizontal Signal Name Resolution Frequency Hz Frequency kHz 1 VESA 640 x 400 70 09 31 47 2 VGA 640 x 480 59 94 31 47 3 640 x 480 72 81 37 86 4 640 x 480 75 00 37 50 5 800 x 600 56 2
43. nal audio component input ANALOG RGB Input Use this 15 pin D Sub input for your external devices with RGB output using the D Sub Mini 15 pin cable provided DVI Input Stand for Digital Visual Interface Use for high quality PC display OPTICAL OUT Digital Audio This jack provides Digital Audio Output for your audio device that is Dolby Digital and PCM compatible such as an audio amplifier DO patsy DIGITAL Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Service Terminal 2 Input For factory adjustment and service please DO NOT connect here DIGITAL RF Input RF input that connects to the antenna cable box or CATV cable Support ATSC TV system 14 CONNECTING EXTERNAL SOURCES The exact arrangement you use to connect the PC VCR camcorder laserdisc player DVD player or HDTV Set Top Box to your Plasma TV is dependent on the model and features of each component Check the owner s manual of each component for the location of video and audio inputs and outputs The following connection diagrams are offered as suggestions However you may need to modify them to accommodate your particular assortment of components and features For best performance video and audio cables should be made from coaxial shielded wire 1 CONNECTING AN DIGITAL TV ANTENNAS ANTENNA 1 Attach an ATSC antenna cable to the Digital RF terminal 2 Connect the outd
44. navigate to different menu item 3 Use thet u to adjust functions 4 Press SEL on the remote control to select functions 5 Press EXIT on the remote control to quickly exit from a menu THERE ARE TWO DIFFERENT MODES FOR THE OSD ARE THE FOLLOWING Audio Video Mode Displays when the TV Composite S video Y CgCr or Y PaPr is selected PC Mode Displays when the Analog RGB or DVI input is selected Audio Video Mode PC Mode Video Picture Mode Video Brightness Brightness Contrast Contrast H Position Color V Position Tint Color Temperature Sharpness Reset Color Temperature Image Auto Adjust Reset Clock Phase Image Aspect Horizontal Clock Border Color Setting Audio Mute Noise Reduction Volume 3 2 Pull Down Treble Audio Mute Bass Volume Balance Treble SRS WOW Bass Subwoofer Balance Language Language SRS WOW System Signal Format Subwoofer PIP Set Language Language Advanced System Signal Format Power Save Advanced System Reset PIP Set V Chip Closed Caption TV Channel Setup System Reset 28 OSD On Screen Display Video Adjusts the picture mode brightness contrast color tint sharpness color temperature and position of your display Audio Video Mode Video Function Options Natural Pictu
45. ngly cautioned R Restricted Children under 17 should be accompanied by an adult NC 17 No Children under 17 X Adults only NR NOT RATED NR Contains no rating Not Rated NR and Not Applicable NA programs Change Password Number To change password enter the Change Password Number option in the V Chip function press SEL button to change password Enter six digital password in enter new password number And then confirm the password by entering the same password again NOTE If you forget the password enter 1 6 8 1 6 8to erase the password 33 Fran ais SETTING UP THE CLOSED CAPTION Closed Caption For some TV programs PDP has the de coding and Close Caption functions This caption is usually served for the deaf or the foreign language translation All VCRs can record Close Caption signals from TV programs so videos will also show the Close Caption function Follow these steps to use closed caption function 1 Press the MENU button on the remote control to bring up the OSD menu 2 Continue to press the button until the System icon is highlighted and press the SEL button to show the system functions 3 Use the buttons to highlight Closed Caption and then press the SEL button 4 Use the following table to set up your Closed Caption Closed Caption Function Options Closed Caption Select the CC mode or close the CC function Off CC1 CC2 TT1 TT2 CC Background Select the CC
46. nket or near a curtain which has a possibility of obstructing a ventilation hole of the PDP TV Do not put the PDP TV in the following places e Hot places such as near heater place exposed to the direct rays of the sun A place where the temperature is widely changing e Places with soot dust or high humidity e Poor air ventilation place e Place near fire e A wet place such as bathroom or shower room e Place where you can trip over it e Always vibrating or strongly vibrating places e Distorted or unstable places OOOO Disconnect the plug from the power outlet e How to view the Plasma Television If you use the monitor in too dark a room your eyes may become tired Please use it in a reasonably bright room Avoid direct rays of the sun to the screen in order to prevent eye fatigue Your eyes will get fatigued after viewing the PDP TV for long period of time Relax your eyes by viewing away from the PDP TV from time to time Please watch the PDP TV in downward direction Note on image retention The plasma PDP TV illuminates phosphor to display images The phosphor has a finite illumination life After extended periods of illumination the brightness of the phosphor will be degraded to such extent that stationary images would burn in that part of the screen as grayed out images Tips to prevent such image retention are Do not display images having sharp brightness differences or high contrast images such as mo
47. nochrome characters and graphic patterns for long Do not leave stationary images appearing for long but try to refresh them at appropriate intervals of time or try to move them using screen saver function Turn down the contrast and brightness controls How to clean the plasma screen panel of the Plasma Television Before cleaning the PDP TV turn off the monitor and disconnect the power plug from the power outlet To prevent scratching or damaging the plasma screen face do not knock or rub the surface with sharp or hard objects Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth If it is not enough then use a cloth with mild detergent Do not use harsh or abrasive cleaners How to clean the cabinet of the Plasma Television Use a soft cloth to clean the cabinet and control panel of the PDP TV When excessively soiled dilute a neutral detergent in water wet and wring out the soft cloth and afterward wipe with a dry soft cloth Never use acid alkaline detergent alcoholic detergent abrasive cleaner powder soap OA cleaner car wax glass cleaner etc especially because they would cause discoloration scratches or cracks SAFETY INSTRUCTIONS continued e Prevention of an obstacle to Radio receivers This PDP TV has been designed pursuant to the international EMI standards This is to prevent a problem to Radio receivers Keep the PDP TV away from Radio Adjust Radio antennas in order
48. nsport it safely Whenever the unit is moved it should be lifted forward using the top and base on both sides for stability When moving the Plasma Television lift the top and the bottom frame as shown below ANTENNA Unless your Plasma Television is connected to a cable TV system or to a centralized antenna system a good outdoor color TV antenna is recommended for best performance However if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts an indoor antenna may be sufficient LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen Also be sure that the location selected allows a free flow of air to and from the perforated back cover of the set To avoid cabinet warping cabinet color changes and increased chance of set failure do not place the TV where temperatures can become excessively hot for example in direct sunlight or near a heating appliance etc HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION VIEWING The major benefit of the HITACHI Plasma Television is its large viewing screen To see this large screen at its best test various locations in the room to find the optimum spot for viewing The best picture is seen by sitting directly in front of the TV and about 8 to 18 feet from the screen During daylight hours reflections from outside light may appear on the screen If so drapes or screens can be used to
49. o 3 months without use might cause an unstable picture when the set is turned on 15 Operating Operating altitude 800 to 1 114hPa 6 194ft to 2 484ft Operating temperature 41 F to 95 F 16 Storage Storage Altitude 300 to 1 114hPa 31 91 2ft to 2 484ft Storage temperature 5 F to 140 F 17 Power ON or OFF Frequent use of the Power ON or OFF might trigger the power protection circuit If the TV does not turn ON please wait a little before turning ON again Fran ais HOOKUP CABLES Most video audio connections between components can be made with shielded video and audio cables that have phono connectors For best performance video cables should use 75 Ohm coaxial shielded wire Cables can be purchased from most stores that sell audio video products Below are illustrations and names of common connectors Before purchasing any cables be sure of the output and input connector types required by the various components and the length of each cable 300 Ohm Twin Lead Connector This outdoor antenna cable must be connected to an antenna adapter 300 Ohm to 75 Ohm _ lt 4 Phono Connector Provided Used on all standard video and audio cables which connect to inputs and outputs located on the rear jack panel i 3 8mm STEREO MINI PLUG Stereo Cable This cable is used to connect from external audio out to the audio input of the Plasma TV ex ANALOG RGB DVI Audio Input D SUB MINI 15 Pin C
50. o enhancement technology from SRS Labs that provides deep rich bass on any speaker system without the need for a subwoofer or additional extra physical components For systems with a subwoofer SRS WOW complements and enhances the bass performance This feature can be set to On or Off NOTES WOW SRS and the symbol are trademarks of SRS Labs Inc SRS WOW technology is incorporated under license from SRS Labs Inc Lang uage Adjusts the language and shades of red green and blue Language Function Options English Language Set the language for the OSD French Spanish 31 OSD On Screen Display Adjusts the screen format and PIP settings Audio Video Mode System Function Options Signal Format Displays video signal information Advanced Adjusts the gamma and move screen function Gamma 0 8 1 0 1 2 or 1 4 Move Screen Mode Off Mode 1 or Mode 2 Move Screen Time 5 255 sec PIP Set Adjust the PIP source position audio source and display Size Off Small Medium Large Source AV SV TV DTV Position Nine different positions Audio Source Select between the sound of your main picture or PIP PIP Display Adjust the brightness contrast and color Swap Switches your main picture and PIP V Chip See Setting up the V chip on page 30 V Chip Requires a password to be entered to view movies and TV programs w
51. o lock movies and TV programs 1 Press the MENU button on the remote control to bring up the OSD menu 2 Continue to press the button until the System icon is highlighted and press the SEL button to show the system functions 3 Use the buttons to highlight V chip and then press the SEL button 4 Enter 7 7 1 1 1 1 as the default password to gain access 5 Use the following table to set up your V chip V chip Function Options TV Guidelines Blocking Blocks selected TV rating and all ratings below it TV Y TV Y7 TV G TV PG TV 14 TV MA TV Rating MPAA Rating Blocks selected MPAA rating and all ratings above it G PG PG 13 R NC 17 X NR Change Password Enter a new password Number TV Guidelines Blocking Ratings Age defined Contents of TV Guidelines TV Y Young children Show Block TV Y7 Children 7 and over Show Block FV TV G General audience Show Block TV PG Parental guidance suggested Show Block V S aL D TV 14 Viewers 14 and over Show Block V S L D TV MA Mature audience only Show Block V S L TV Rating Rating Off Select this function all ratings change to show FV Fantasy or cartoon violence V Violence S Sexual content L Offensive language D Dialogue sexual innuendo MPAA Rating Ratings Age defined G General audience no restrictions PG Parental guidance suggested PG13 Parents stro
52. oid the user s authority to operate the equipment POWER SOURCE THIS PLASMA TELEVISION IS DESIGNED TO OPERATE ON 120 VOLTS 60Hz AC CURRENT INSERT THE PLASMA TELEVISION POWER CORD INTO A 120 VOLT 60Hz OUTLET TO PREVENT ELECTRIC SHOCK DO NOT USE THE PLASMA TELEVISION S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES AND GROUND TERMINAL CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE NEVER CONNECT THE PLASMA TELEVISION TO 50Hz DIRECT CURRENT OR ANYTHING OTHER THAN THE SPECIFIED VOLTAGE Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus NOTE This Plasma Television will display television closed captioning or in accordance with paragraph 15 119 of the FCC rules voltages and other hazards If the television does not operate properly unplug the Plasma Television and f CAUTION Never remove the back cover of the Plasma Television as this can expose you to very high call your authorized dealer or service center IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Follow all warnings and instructions marked on this television 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with a dry cloth 7 Do not block any ventilation openings Install in accordance wi
53. oment are delivering digital TV programs when the time of government mandated transition deadline comes all the analog TV transmissions have to give way to digital which makes the ZAT series digital terrestrial HDTV receivers a wise investment now Digital TV programs are broadcasted on both VHF and UHF radio frequency bands Traditional analog TV transmission uses one radio Fran ais frequency channel for carrying one TV station s programs in the digital TV transmission one radio frequency channel can carry up to four more TV station s programs For instance the original analog channel CBS you used to watch now may have become 2 1 2 2 2 3 2 4 when it s broadcasted in digital here we call 2 as the major channel and 1 2 3 and 4 are sub channels These four sub channels usually come from the same TV station and show four different programs at the same time Digital TV signals are transmitted in either Free to Air FTA mode or Pay per View PPV mode FTA signals can be received free by anyone with MPEG 2 ATSC compliant digital terrestrial receiver such as the ZAT series whereas the PPV programs can only be received by paying an access fee to the broadcaster and using a Digital receiver incorporating compatible conditional access system The receiver allows you to watch HDTV EDTV and SDTV digital TV programs HDTV stands for High Definition Television its common video formats are 1920 x 1080 interlaced or 1280 x 720 prog
54. on to select Mono Stereo and SAP Second Audio Program under TV mode 29 PIP SWAP button Press to exchange the main video signal source with PIP video signal source 30 PIP INPUT button Activate PIP by pressing PIP Input button to select desired video input To turn off PIP by keep pressing PIP Input button until the PIP window disappear PIP source cannot be the same with main video source PC amp Component are not accessible to PIP Francais Main Composite amp Component NTSC DTV DVI Analog RGB Sub S Video 480i NTSC DTV Composite amp S Video Component 480i x x x x x DVI x x x x x Analog RGB x x x x x NOTES For changing TV channel under PIP function 1 One TV source NTSC or DTV in main picture or sub picture Press directly channel number and return buttons on remote control to change the channel 2 NTSC and DTV sources in main picture and sub picture Press recall button to display the audio source info After select the audio source to the mode you want to change press channel number and return buttons on remote control to change the channel 31 SLEEP button Press the sleep button repeatedly to set the sleep timer to 30 60 90 and 120 minutes 27 OSD On Screen Display USING THE ON SCREEN DISPLAY OSD CONTROLS 1 Press MENU on the remote control to display the different features on your HITACHI Plasma TV 2 Use the t u to
55. oor antenna cable lead in to the terminal marked Digital RF IN on the rear of the TV set Tl 3 Connect all power sources before activating the PDP TV Fran ais 4 Turn on the PDP TV DIGITAL RF IN Service Terminal 2 5 Press DTV on the remote O Antenna cable NOTES Refer to the owner s manual of the external equipment to be connected When connecting external equipment do not connect the AC power cords to wall outlets until all other connections are completed CONNECTING AN ANALOG TV CABLE OR AN ANALOG ANTENNA WITHOUT A TV CABLE BOX 1 Use one of the following two diagrams if you connect to an outdoor antenna A Using a VHF UHF combination outdoor antenna B Using separate VHF and or UHF outdoor antennas 2 Connect all power sources before activating the PDP TV 3 Turn on the PDP TV 4 To use the TV press NTSC on the remote A B UHF ANTENNA VHF UHF 300 obm ANTENNA twin lead cable VHF ANTENNA 75 ohm coaxial cable 75 ohm coaxial cable 300 75 ohm adapter 300 ohm no supplied twin lead cable ACIN Antenna cable Antenna cable NOTES Ensure that the power cord is inserted correctly to avoid connector damage 15 CONNECTING EXTERNAL SOURCES CONNECTING HDTV SOURCES HDTV input sources such as a digital cable box digital satellite receiver or digital terrestrial receiver box can be connected as desired using the appropriate cable system 1 Conn
56. or Press these buttons until the desired channel appears in the top right corner of the TV screen These buttons also serve as the cursor down and up A buttons when in MENU mode VOLUME level Press these buttons to adjust the sound level The volume level will be displayed on the TV screen These buttons also serve as the cursor left lt and right gt buttons when in MENU mode INPUT EXIT button Press this button to select the desired input NTSC DTV Composite VIDEO S VIDEO YCgCr YPaPr Analog RGB or DVI source This button also serves as the EXIT button when in MENU mode MENU SELECT button This button allows you to enter the MENU making it possible to set TV features to your preference without using the remote This button also serves as the SELECT button when in MENU mode 12 REAR PANEL MAIN POWER SWITCH amp JACKS REAR VIEW 42 PLASMA TV leak sja Be z Le H it i MAIN POWER button This power button is for the complete system and must be turned ON OFF manually It is recommended to leave the MAIN POWER to ON condition lights red for stand by mode AC IN input This TV is designed to operate on 120VOLTS 60Hz AC current Insert the TV power cord into a 120VOLTS 60Hz outlet Service Terminal 1 Input For factory adjustment and service please DO NOT connect here ANALOG FF Input RF input that connects to the antenna cable box or CATV cab
57. p boxes Use these connections in place of the standard video connection if your device has this feature e Your component outputs may be labeled Y B Y and R Y In this case connect the components B Y output to the TV s PB input and the components R Y output to the TV s PR input e Your component outputs may be labeled Y CgCr In this case connect the components CB output to the TV s PB input and the components CR output to the TV s PR input e It may be necessary to adjust TINT to obtain optimum picture quality when using the Y PgPr inputs e To ensure no copyright infringement the TV VIDEO OUT output will be abnormal when using the Y PgPr RGB and DVI input jacks e When using a DVI input from a Set Top Box it is recommended to use a 1080i or 720p input signal 23 Fran ais HOW TO USE THE REMOTE TO CONTROL YOUR PLASMA TV r Li DEK pecu mme O o 1 taf Ua WRG il a 41 iS J Arse T a a E Wisi tan LET Hi Di HILF LL ARFECT FREESE LEE A Er Pl EDO PE fl E m PF 0 APE 1 POWER button Press this button to turn the TV set on or standby 2 MUTE button Press to mute the volume Press again to restore the volume 3 RECALL button Press to display source input signal on the display When the PIP function is working press to display audio source Then press buttons to select between the sound of your main picture or PIP 4 QUICK buttons Shortcut to access the Brightness
58. r malfunction of the remote control e Take care not to drop the remote control e Do not place heavy objects on the remote control Avoid strong rays Any strong rays such as direct sun rays or room lighting onto the remote control sensors could invalidate the remote control Avoid radio interference Any interfering radiation could cause distorted images or noises e Avoid radio generator such as a mobile telephone transceiver etc around the PDP TV Set the sound volume at a suitable level It is better to keep the volume level low and close the windows at night to protect the neighborhood environment e Precautions for the installation Do not use makeshift stands and NEVER fix legs with wood screws to ensure complete safety always fit the manufacturers approved stand or legs with the fixings provided according to the instructions Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over This product is designed to comply with the recommended safety standards for tilt and stability Do not apply excessive pulling force to the front or top of the cabinet that could cause the product to overturn resulting in product damage and or personal injury Follow instructions for wall shelf or ceiling mounting as recommended by the manufacturer Only use the attachments
59. re Mode Select a preset customized picture setting Cinema Dynamic Brightness Adjusts the darkness and lightness of the display 0 to 100 Contrast Adjusts the color brightness of the display 0 to 100 Color Adjusts the saturation level of color 0 to 100 o Tint Adjusts the color properties 0 to 100 Sharpness Adjusts the clarity of images 0 to 31 Cool Natural Color Temperature Adjusts the level of the color temperature Warm Black amp White User Reset Puts all of your display settings back to their default PC Mode Video Function Options Brightness Adjusts the darkness and lightness of the display 0 to 100 Adjusts the color brightness of the display Contrast Not available for DVI 480p 720p 1080i signals PATES ya Moves image to the left or right H Position Not available for DVI 480p 720p 1080i signals peels Pe Moves image up or down Qi Not available for DVI 480p 720p 1080i signals eee Sharpness Adjusts the clarity of images W 0to31 Available for 480p 720p 1080i signals Cool Natural Color Temperature Adjusts the level of the color temperature Warm Black amp White User Reset Puts all of your display settings back to their default 29 OSD On Screen Display Adjust scaling auto adjust border color set noise reduction 3 2 pull down clock phase and horizontal clock Audio Video Mode Image Function Options 4 3 standard
60. reduce the reflection or the TV can be located in a different section of the room If the TV s audio output will be connected to a Hi Fi system s external speakers the best audio performance will be obtained by placing the speakers equidistant from each side of the receiver cabinet and as close as possible to the height of the picture screen center For best stereo separation place the external speakers at least four feet from the side of the TV place the surround speakers to the side or behind the viewing area Differences in room sizes and acoustical environments will require some experimentation with speaker placement for best performance IMPORTANT NOTES No Items Notes 1 Arching sound from plasma television panel A buzzing sound might be heard when the plasma television is turned on in a very quiet room This is due to the plasma display panel drive circuit when it is functioning This arching sound is normal and it is not a malfunction 2 Interference for infrared Some infrared rays are emitted from the plasma television s panel that might affect other infrared controlling equipment equipment 3 Bright and dark spots High precision technology is used to manufacture the plasma display panel But in some cases there are minor defects in some parts of the screen Points that do not light points with brightness different from that of the periphery points with color d
61. ressive EDTV stands for Enhanced Definition Television its common video format is 720 x 480 progressive SDTV stands for Standard Definition Television its common video format is 720 x 480 interlaced ATSC RECEIVER FUNCTIONS The Digital Terrestrial HDTV Receiver opens up a new world of free to air terrestrial HDTV and SDTV programming The receiver can receive channels from both VHF band and UHF band TV station s signals All the major terrestrial free to air station numbers currently available in your area are listed in the on screen menu To watch the channel simply by selecting the channel number and you will be accessing a wide range of local high quality digital programming The receiver is fully ATSC MPEG 2 digital video broadcast terrestrial compliant delivering High Definition crystal sharp video and Dolby AC 3 sound It supports a radio signal range from 50 860 MHz so can be easily programmed for all the channels within the VHF and UHF frequency bands It can receive major and sub channels containing both video and audio programs These receivers have the capability of receiving hundreds of channels simply by selecting alternate TV channel frequencies in your area To find out the specific digital TV services available to you please contact your local service provider or log onto the website http www antennaweb org With the wide range of features and terrestrial HDTV programming opened up to you by ZAT se
62. ries digital terrestrial receivers prepare yourself for a new era in home theater entertainment 35 SETTING UP YOUR DTV 1 Make sure the physical connection is properly connected 2 Switch on the TV 3 Select the appropriate external video input on your TV by using the TV remote control 4 If the PDP is moved to a different location You should reset the receiver and do the channel scanning all over again USING THE DTV ON SCREEN DISPLAY OSD CONTROLS 1 Press DTV MENU on the remote control to display the MENU banner 2 Use the t u to navigate to different menu item 3 Use thet u to adjust functions 4 Press OK on the remote control to select functions Press BACK to jump back the last page of menu 5 Press EXIT on the remote control to quickly exit from menu Channel Enter Password Edit Auto Scan Manual Scan Caption Font Size Default Small Middle Large Font Style Default Style0 7 Font Color Background Foreground Font Opacity Background Foreground Edge Style Default None Raised Depressed Uniform Drop_Shadow L Drop_Shadow R Edge Color Default Gray Blue Red Green Cyan Yellow Dark Setup Sound PCM Dolby Digital Opacity 0 100 adjustment I Plate Display Time Time Zone Time Format Time Adjustment About HW amp SW version Lock Enter Password Rating Password Reset Default Channel Before you can use any of the channel buttons CHHK K FAV CH Numb
63. s are placed to the left and right of the image to preserve the original aspect ratio of the source Note Use this mode for only 15 of your total viewing time to prevent uneven aging of the phosphors Phosphors in the lighted area of the picture will age more rapidly than the gray areas 4 3 EXPANDED Use this aspect mode to display conventional 4 3 sources by linearly increasing image expansion from the center towards the edges of the display area in order to fill it 4 3 Zoom1 Zoom2 Use these aspect modes to zoom in on conventional 4 3 sources 16 9 STANDARD Use this aspect mode to display 16 9 sources like HDTV and DVD s preserving the original 16 9 aspect ratio 16 9 Zoom Use this aspect to Zoom in once while in 16 9 aspect 1 NTSC 480i 480P Input 4 3 STANDARD 4 3 EXPANDED 4 3 ZOOM1 q D m 16 9 ZOOM 4 3 ZOOM2 2 480i 480P Input Q O 4 3 STANDARD 4 3 ZOOM1 Oo 16 9 ZOOM 4 3 ZOOM2 3 720P 1080i Input zon N A 16 9 STANDARD 16 9 ZOOM 4 3 EXPANDED 4 4 RGB Input Auto adjust to full size Aspect ratio is not changeable 26 HOW TO USE THE REMOTE TO CONTROL YOUR PLASMA TV 26 P MODE button Press to select standard movie and dynamic picture mode Press repeatedly to circle through the selections 27 ZOOM buttons Zoom in on the image by pressing Zoom button and press Zoom button to zoom out 28 MTS button for DTV Multi Language mode Press MTS butt
64. s could result in fire or electrical shock Use special caution in households where children are present If liquids or foreign objects should enter the projector immediately turn off the power switch disconnect the power plug from the power outlet and contact your dealer Do not place the PDP TV in a bathroom e Do not expose the PDP TV to rain or moisture Do not place flower vases pots cups cosmetics liquids such as water etc on or around the PDP TV e Do not place metals combustibles etc on or around the PDP TV Never disassemble or modify the Plasma Television The PDP TV contains high voltage components Modification could result in fire or electrical shock e Never remove any fixed cover Do not disassemble Do not give the Plasma Television any shock or impact If the PDP TV should be shocked and or broken it could result in an injury and continued use could result in fire or electrical shock If the glass panel is broken or damaged immediately turn off the power switch disconnect the power plug from the power outlet and contact your dealer Do not place the Plasma Television on an unstable surface If the PDP TV should be dropped and or broken it could result in an injury and continued use could result in fire or electrical shock e Do not place the monitor on an unstable slant or vibrant surface such as a wobbly or inclined stand Do not obstruct the ventilation of the Plasma Television If the ventila
65. th the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Only use the attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped A
66. tion is obstructed during the operation of the monitor or just after switching off the power it could result in damage and shorten the lifespan of your PDP TV due to overheating Make sure there is ample ventilation Keep a space of 100mm 10cm or more between the sides rear and top of the PDP TV and other objects such as walls e Do not place anything around ventilation openings of the PDP TV e Never block ventilation openings e Do not put the plasma screen side up Do not cover the PDP TV with a tablecloth etc Do not place the PDP TV on a carpet or bedding or near a curtain Use only the correct power outlet Incorrect power supply could result in fire or electrical shock Use only the correct power outlet depending on the indication on the PDP TV and the safety standard e The enclosed power cord must be used depending on the power outlet to be used 3 gt SAFETY INSTRUCTIONS continued Be cautious of the power cord connection Incorrect connection of the power cord could result in fire or electrical shock Do not touch the power cord with a wet hand e Check that the connecting portion of the power cord is clean with no dust before using Use a soft and dry cloth to clean the power plug e Insert the power plug into a power outlet firmly Avoid using a loose unsound outlet or contact failure e Do not cut off the fitted power plug the removal of which could lead to impaired performance If you wish to e
67. to prevent electric shock Do not touch the power plug when lightening is close to you Avoid coiling the power cord and bending it sharply e Protect the power cord from being walked on pinched particularly at plugs conveniences receptacles and the point where they exit from the apparatus e Do not modify the power cord Be careful in handling the battery of the remote control Incorrect handling of the battery could result in fire or personal injury The battery may explode if not handled properly e Keep the battery away from children and pets If swallowed consult a physician immediately for emergency treatment Do not allow the battery to be exposed to fire or water Avoid fire or high temperature environment Do not hold the battery with metallic tweezers e Keep the battery in a dark cool and dry place e Do not short circuit the battery e Do not recharge disassemble or solder the battery e Do not physically impact the battery e Use only the battery specified in the manual of this monitor e Make sure the plus and minus terminals are correctly aligned when loading the battery If you observe a leakage of the battery wipe out the liquid and then replace the battery If the liquid adheres your body or clothes rinse well with water Obey the local laws on disposing the battery A WARNING SAFETY INSTRUCTIONS continued Be careful in moving the Plasma Television Neglect could result in an injury or damage
68. u have any questions regarding warranty service operation or technical assistance please contact In Canada 1 800 HITACHI 1 800 448 2244 Monday Friday EST 9 00am 7 00pm Saturday EST 9 00am 5 00pm Fran ais Look for your French Manual on the outside of the box Ifthe manual is missing call 1 800 HITACHI 1 800 448 2244 for a Copy Pour de plus amples renseignements sur le service durant la p riode couverte par la garantie sur le fonctionnement ou pour de l ssistance technique communiquez avec Au Canada 1 800 HITACHI 1 800 448 2244 Lundi Vendredi L EST 9 00am 7 00pm Samedi L EST 9 00am 5 00pm La version francaise de votre manual se trouve xt rieur de la bo te Si le manuel est manquant coposez le 1 800 HITACHI 1 800 448 2244 pour obenir votre copie HITACHI CANADA LTD 2495 Meadowpine Blvd Mississauga ON L5N 6C3 END USER LICENSE AGREEMENT FOR HITACHI DTV SOFTWARE IMPORTANT READ CAREFULLY This License Agreement is a legal agreement between you and Hitachi America Ltd Home Electronics Division HAL HED By using this Hitachi digital television the DTV and its software the Software you agree to be bound by the terms of this License Agreement IF YOU DO NOT AGREE TO BE BOUND BY THIS LICENSE AGREEMENT DO NOT USE THIS DTV AND ITS SOFTWARE The Software is protected by copyright laws and international copyright treaties as well as other intellectual property laws
69. xcessive heat or moisture may cause the remote control unit to fail When the batteries run down remote control operation will become erratic or become unresponsive Replace the old batteries with two new AAA size batteries Do not use an old battery with a new battery Exposing the screen to direct sunlight for a long period of time or heat may cause damage to the plasma screen 40 RECEPTION PROBLEMS e IGNITION NOISE Black spots or horizontal streaks may appear picture may flutter or drift Usually caused by interference from automobile ignition systems neon lamps electrical drills and other electrical appliances e GHOSTS Ghosts are caused by the television signal following two paths One is the direct path and the other is reflected from tall buildings hills or some other objects Changing the direction or position of the antenna may improve reception Ghosting may also be caused by defects in the antenna system such as unshielded leads or connecting several sets to the same antenna without using multiple antenna couplers SNOW If your receiver is located in the fringe area of a television station where the signal is weak your picture may be marred by the appearance of small dots When the signal is extremely weak it may be necessary to install a special antenna to improve the picture e RADIO FREQUENCY INTERFERENCE The interference produces moving ripples or diagonal streaks and in some cas
70. xtend the lead obtain an appropriate extension lead or consult your dealer e Should you require replacing the fuse in the molded plug with a new fuse then please replace with new one of the same value type and approval as the original Ensure the fuse cover is returned to its original position Be sure to keep safety ground connection Connect the ground terminal of AC inlet of this PDP TV with the ground terminal provided at the power outlet using the enclosed power cord If the provided plug does not fit your outlet consult an electrician for replacement of the obsolete outlet 2 s 5 Surely connect Be careful in handling the power cord and external connection cables the ground wire If you keep using a damaged the power cord or cables it can cause a fire or electrical shock Do not apply too much heat pressure or tension to the power cord and cables If the power cord or cables are damaged exposed or broken core wires etc contact your dealer Do not place the monitor or heavy objects on the power cord and cables Also do not place a spread cover etc over them because this could result in the inadvertent placing of heavy objects on the concealed power cord or cables e Do not pull the power cord and cables When connecting and disconnecting the power cord or cables do it with your hand holding the plug or connector e Do not place the cord near the heater Do not touch the power plug just after disconnecting it from the power outlet
71. you forget the password please use the password 1688 to enter 3 To enter the new password and follow the instruction Reset Default This function allows to reset receiver back to factory default status gt 1 1 Press buttons to highlight the Reset Default and then press OK to into the channe a PE al Setup rating control menu 2 There will pop up the RESET confirmation message Press Yes will reset default to default value Press OK on Yes to process Press OK on NO to cancel the setting Frangais Gelect YES to restore delu value CLOSED CAPTION C C Options 1 When you learn from the I PLATE that there is Closed Caption data on the current channel you can press CC button on the remote control to display C C Option list it on the TV screen eee 2 Use and keys to highlight the desired CC signal and press OK button 3 After the type of Closed Caption has selected press EXIT or CC key to cancel the CC Option list then you can watch this Digital TV program with Closed Caption FAVORITE CHANNEL LIST 1 When you are watching terrestrial or cable TV channels you can press FAV button on the remote control to call up the Favorite List 2 Uset andu keys to navigate ALL ATSC NTSC and FAV program lists Fa oo Peu OY co 4 PGR2OTY 3 Use and keys to browse through the selected program as 4 PEROT lists and highlight the program you

Download Pdf Manuals

Related Search

Related Contents

SBS EM0TCT84B  掛時計電波クロック 取扱説明書 1 はじめに 2 電波時計  Télécharger  M1835_M1935_M1945 Manual usuario esp  Sprint Nextel T608 User's Manual  istruzioni per l`uso slitta compatta universale elettrica    Virtu USA ES-27048-WMRO-WH Installation Guide  DPC 8015 DPC 8120 Digital Paging Console    

Copyright © All rights reserved. Failed to retrieve file