Hitachi 37LD9000TA LCD TV User Guide Manual
Contents
1. Dynamic Bass gives you the enhanced bass sound Low frequency signals can be boosted while the output signal amplitude is measured Adjust the Bass of the sound Treble Balance Perfect Volume Adjust the Treble of the sound Adjust the balance of the sound comes out from right and left side of the speakers Notice When Matrix Surround is enabled adjusting the Balance will not completely mute any one speaker Automatically adjusts audio input levels to stay within a safe volume range For example when the input sound is too loud the volume is automatically decreased ED Information Reset all the set values on this Menu Page to the original factory settings by pressing button There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset every time Downloaded From TV Manual com Manuals 29 ENGLISH MENU OPERATION continued This allows your television to turn Off Standby mode at set time automatically which you may find useful Timer of lt gt Adjust 5 Return Off 30Min Off Timer eomm This function automaticaly sets me power to Standby mode when the selected time period has elapsed 90Min 120Min D Information One minute before the time you set the screen will display Time off within one minute 30 a Downloaded From TV Manual com Manuals FUNCTION What is T2. Input Switching to TV AV1 4 HDMI and RGB By pressing Input Select button you can switch the input Input Select e To watch actual broadcast press Input Select button on the control buttons panel the numeric buttons or Channel Up Down button on the remote control e To display the image outputting from the external equipments connected to each terminal AV1 4 HDMI and RGB select corresponding mode 1 Press Input Select buttons on the remote control Channel UP DOWN buttons 2 The Input modes can be also switched by using Input Select button on the control panel Each time this button is pressed the screen displays corresponding Input Select Program Down Program Up button button mode by following order ae gt AV2 AV3 RGB lt HDMI AV4 3 To directly go back to TV mode pressing channel Up Down buttons on remote control or pressing Program UP Down on the control panel Also you can use the numeric buttons on the remote control Input Signal Screen Display The input signal status can be displayed on the screen by pressing the button of the remote control RECALL button e The display will go out in approximately 5 seconds TV TV position ABCDE Name y Sound mode VIDEO cont Input mode Composite Signal mode RGB Input Mode Input horizontal frequency of RGB Input vertical frequency of RGB 21 Downloaded From TV Manual com Manuals ENGLISH MENU OPERATION
3. i M Ul IL UTI 18 Downloaded From TV Manual com Manuals BASIC OPERATION Now turn On the main power of the unit Make sure that the Power Cord has plugged into the wall socket Main Power switch on the left side Indicating Lamp e To turn On the power of the television 1 Press the Main Power switch on the television Sub Power button e The Indicating Lamp will illuminates in Red Standby mode 2 Press Sub Power button either on the control panel or on the remote control e The color of the Indicating Lamp turns into Green and the image will display on the screen e To turn Off the power of the television 1 Press Sub Power button either on the control panel or on the remote Sub Power button control PROGRAM MENU 209000 A e The image disappears from the screen and the Indicating Lamp turns into Red Standby mode 2 Press Main Power switch to completely turn Off the power of the unit The Indicating Lamp Status Check Indicating Lamp Power Status Power Switch Status Status Main power On ee e To a Groen Main power On Sub Power button gt On Main power On orange Power savermoder Sip Foner buton On About Power Save mode see Power Save Mode Jand When Following Messages Appear on the Screen on 35 e Ifthe image does not appear on the screen at all or have any problem see TROUBLESHOOTING on 36
4. represents the Mono broadcast 34 Downloaded From TV Manual com Manuals FUNCTION continued When the RGB input is selected e When this unit is connected to a VESA DPMS computer the Power Save mode Operation mode Off can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit sync PC signal Active normal display Blank no display Indicating lamp Lights green Lights orange Returning to operating status e Operate the personal computer then input computer s H sync V sync or press the Sub Power button of the control panel or the remote control to restart the television Downloaded From TV Manual com Manuals 35 ENGLISH TROUBLESHOOTING Before calling service technician check the following tables first If the problem is not be solved with the suggested procedures contact your local dealer For your safety NEVER try to repair the product by yourself Message Condition Action This indicates it is in Power Save mode in RGB mode Power Save ae The indicating lamp lights in orange The unit cannot detect any signals from any input terminals No Sync Signal e Check if the cable is connected correctly and firmly Check if the power of the external equipments is ON Check if the input selection matches the connection terminal Check if the PC is in Power Save mode or not e Check the Indicating lamp status Off Red Green or
5. 38 It may help you to solve the problems e You can turn ON the power only by pressing the Sub Power button during the Standby mode e Do not switch the power On Off repeatedly in a short period of time It could cause malfunction e To avoid sudden surges of electricity when the power comes back on turn Off the main power of the unit before you leave if there is a blackout during use of the unit 19 Downloaded From TV Manual com Manuals ENGLISH BASIC OPERATION continued Volume UP DOWN 1 To increase the sound volume press tl button on the remote control or Volume Up button on the control panel e The Volume Indicator value on the screen will shift right 2 To decrease the sound volume press Z button on the remote control or Volume Down button on the control panel e The Volume Indicator value on the screen will shift left Volume Up Down Mute button button 1 To mute the sound press SKbutton on the remote control Volume Down Volume Up button button e The sound of the unit is temporarily turned Off e When the audio mode is set to Mute mute icon QK will be displayed sree we Ol at the left bottom corner of the TV 2 To turn the sound back press aX button again or Volume Up button on either remote control or the control panel You can decrease the volume by pressing T button while muted the gK Mute volume 20 Downloaded From TV Manual com Manuals BASIC OPERATION continued
6. Avoid using a parallel flat feeder wire as interference may occur causing reception to be unstable and stripe noise to appear on the screen e Avoid using indoor aerial as this may be affected by interference Please use CATV net or outdoor aerial e For safety install an external aerial conforming to AS1417 1 applicable for Australia only e If there are noise appearances in the picture of VHF Low band channel please use the double shielded cable not provided for RF LEADS to reduce the noise 14 Downloaded From TV Manual com Manuals CONNECTION continued Connecting Procedure continued 3 Connecting to External Equipment e Terminals on Rear ENGLISH AV1 can be connected to the equipment with an S Video output and Composite output OUT VIDEO os 05 AUDIG Os ae S VIDEO E If your external device has a S video terminal S VIDEO connection is recommended for higher quality picture AV3 and AV4 can be connected to the equipment with Component output Aumo Y Pa ooo H0 E i INPUT AV4 5606 26 Mauna Y If your external device has a Component terminal COMPONENT connection is recommended for higher quality picture 15 Downloaded From TV Manual com Manuals CONNECTION continued Monitor Out can be used to display same image as main unit on another television When this output terminal is connected to an external television with a 75 Ohm terminal the same image from
7. In case of using Wall or Ceiling Mounting unit by contacting your local dealer ask the specified installation specialist to set up Never attempt to install it by yourself It could cause injuries or damages Please leave the adequate space around this 10cm 4 inches or more television in order to avoid increasing the internal 10cm or 30cm 10cm more or more or more temperature Make sure not to block any ventilation holes Do not install the television in the small space such as inside the rack closet or the box Leave more than 10cm of clearance from each side of television and 30cm from the top of television to wall Install in a stable place and implement safety measure against overturning Securing to a wall or pillar Using a commercially available cord chain and clamp secure the set o to a firm wall or pillar Cord or chain Z T _ Wall or Pillar Securing to ceiling Using a commercially available cord chain and clamp secure the set to a ceiling e For more information regarding the mounting of the unit please contact your dealer e Please install the unit at a proper area where it does not expose anyone to the danger of hitting themselves for example their hands head or face etc against the edge of the unit and cause personal injury 13 Downloaded From TV Manual com Manuals ENGLISH CONNECTION Rear Power Cord Sock
8. Orange Check the connection of the Power Cord and or other cables Check if the Main Power of the unit or external equipments is ON Check if the TV mode is selected e Check if the TV is in Standby mode or Power Save mode e Adjust the values in Picture menu and Audio menu No picture no sound e Check the aerial connection and direction Snowy picture poor sound Erp Sa e The TV station may have broadcast difficulties e Try another channel Check the aerial connection and direction Fine tuning the TV Check the connection of the external equipments The TV station may have broadcast difficulties Try another channel Multiple images normal sound e Check if the source of interference is shielded well e Remove those kinds of electrical devices away from the TV Intermittent interference Check the volume level Check if the 2K button has been press or not Normal picture but no sound Make sure that the headphone is NOT connected Check the connection of the external equipments No picture normal sound Check the volume level of Brightness and Contrast in Picture Menu 26 28 e Check if the batteries are installed correctly The batteries might be exhausted Replace them with new ones Remove all the obstructions in front of the sensor window on the unit Check if the buttons of the control panel can work The remote contr
9. composite AV1 AV2 or RF signal can be displayed to the external television VIDEO Gies c E auno A Example Example OUTPUT SUG WOOFER ra th i PC terminal D sub 15 pin or audio is connected to PC which allows Analog RGB signal PC AUDI ANALOG Ej Mini stereo amp plug Example 16 Downloaded From TV Manual com Manuals CONNECTION continued Connecting Procedure continued ili Example VCR IN our LS Set Top Box D Information HDMI High Definition Multimedia Interface is next generation multimedia I O interface Only one cable is used to transmit all video audio control signals which creates easy connection Moreover those digital signals can produce high quality data without any degradation If your external device has a HDMI terminal HDMI connection is recommended for higher quality picture and sound e Terminals on Side Since the following terminals are located on the side it is very convenient to use the extra device on a temporary basis after done the connections on the rear panel AV2 can be connected to the equipment with an S Video output and composite output Example 9 S VIDEG VIDEO a auno M If your external device has a S video terminal S VIDEO connection is recommended for higher quality picture Downloaded From TV Manual com Manuals k pr 17 ENGLISH CONNECT
10. is made with fine processing glass e Residual image When a still image or menu is displayed on the screen for a short time about a minute and then switches to another image it may leave an after image on the screen The residual image will disappear on its own e The Usage under the Low Temperature Environment Because of the structural characteristics of the LCD panel the response speed of the LCD panel becomes slower when the ambient temperature around the television becomes too low In some cases it may cause the residual image The residual image will disappear on its own as the temperature goes up and back to normal Downloaded From TV Manual com Manuals Enjoy not only beautiful and high quality pictures on the display but also various kinds of useful and convenient functions in your daily life e Large screen and high definition LCD panel e Improved Digital signal processor e Accept more digital input devices with HDMI terminals e Great diversity of connecting terminals to cover wide range of audio visual equipments e Enjoy the image from PC with large high definition LCD screen e Easy to use On Screen Display system operating with Remote control e Low power consumption with Power Saving feature SUPPLIED ACCESSORIES Check the supplied accessories before installation Remove the protection film from the Remote Control before using In case of missing or damaged please contact with dealer immedia
11. 5 C to 35 C Storage 0 C to 40 C Net dimensions Net weight conatona Relative Humidity Operating 20 to 80 Storage 20 to 90 non condensing Power supply AC110 240V 50 60Hz Power consumption at standby 180W lt 1W Audio output Speaker total 20W VIDEO input AV1 2 composite video input terminal RCA S video input terminal L R audio input terminal RCA AV3 4 component video input terminal RCA L R audio input terminal RCA HDMI HDMI input terminal Composite video PAL SECAM NTSC3 58 NTSC4 43 PAL60 Input terminals pur signals Component video 480i 576i 480p 576p 720p 50 720 60 1080i 50 1080i 60 OUTPUT MONITOR composite video monitor output terminal RCA Oru canals OUTPUT MONITOR L R audio monitor output terminal RCA Ee OUTPUT HEADPHONE L R audio monitor output terminal Mini pin OUTPUT SUB WOOFER Woofer output terminal RF input Input terminal Receiving range ANT 750 Unbalanced 44 870MHz PAL B G H 1 D K RF Video System SECAM B G D K K1 NTSC M RGB input Analog RGB input terminal D sub 15 pin Input terminals Audio input terminal 3 5mm Stereo Mini Jack Input signals 0 7 V analog RGB Recommended Signal Sync signals H V separate TTL level 2kQ e The television takes at least 30 minutes to attain the status of optimal picture quality Downloaded From TV Manual com Manuals r ENGLISH PRODUCT SPECIFICAT
12. Downloaded From TV Manual com Manuals USER S MANUAL Thank you for purchasing the HITACHI LCD Television Please read this user manual carefully before operating this product To ensure proper operation please read and follow ALL the instructions especially the IMPORTANT SAFETY INSTRUCTIONS and SAFETY PRECAUTIONS Please keep this user manual for future reference ENGLISH CONTENTS IMPORTANT SAFETY INSTRUCTIONS 00 2 Volume UP DOWN sccscctecinssatececitraencinissceunsiemaessesnns 20 INSTRUCTIONS wrsswcctipaccsctccecnnntussbenseveravestspietiecteancenceseanace 3 MUTE seese ie E a a 20 About This Manual cccccccce ccs cese esse seeeseeeeeeeeeen eens 3 Input Switching to TV AV1 4 HDMI and RGB 21 Trademark Credits xtc ceccces ieee ince cdiexdetddeecaaaanteteeemereiae 3 Input Signal Screen Display cc ssssseeeeeeeeeeeeeees 21 About Software ecco sssebhcnenchay eeeeeen wed eaqaeababesaaeens 3 MENWOPERA TION sssssssssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 22 SAFETY PRECAUTIONS wiscciccsssiitesvsastencsodinonmnseccvenes 4 How to use the On Screen Display OSD system 22 About the Symbols scsccceseccsscsccssaccddicceadedanentacceearasnccceses 4 Language MeN ccccccsssssseceeeeesseeseessasseeeenseees 22 Cleaning and Maintenance cccccccsesssseseeeeeeeeeeees 7 Setup Menu TV Mmode ccccccccssssssseeeeeeeeeeeeeeeeees 23 ABOUT LCD PANEL vssswssctos
13. How to use the On Screen Display OSD system With the On Screen Display system you can access the various kinds of the features and functions in this product e Basic Operation MENU Audio 1 Press button on the remote control or Menu button on the miner control panel of the unit The Main Menu is displayed on the screen Saup as shown on the right Language Select 2 To select the item press A or W buttons Set The selected item will be highlighted in Green lt Main Menu gt 3 Press button to set your selection The selected menu page will be displayed on the screen MENU Button 4 Use A or V buttons to choose the item on the MENU page Press button to set your selection 5 Use or P gt buttons to adjust the item values or choose options Press button to set your selection ve MENU button 6 To exit from the menu press button The OSD menu screen will be closed automatically when no operation has been made for about 30 seconds Language Menu Select the language from the list so that you can display the OSD menu in the selected language How to set Language Language English 1 Enter the Language menu from the Main Menu o fai AC o KPK 2 Select the appropriate language with A or V button from the list ae The selected item will be highlighted in Green Select Ok Set Return 3 Press button to set your selection The white dot is marked inside of the circle
14. ION continued Headphone The detail settings can be adjusted from Audio Menu on page 29 The audio from the speaker will be muted when connecting the headphone to this terminal 4 Connecting the plug into the wall socket Connect the Power Cord after completing all other connections The type of plug is different from this drawing for some countries 1 Connect the power cord to this device 2 Fix the power cord cable to the clamp 3 Connect the power cord to the power outlet CAUTION e Use only the Power Cord provided e Do not use a power supply voltage other than that indicated AC110 240V 50 60HZz It may cause fire or electric shock e For the LCD panel a three core power cord with a ground terminal is used for efficiency protection Always be sure to connect the Power Cord to a three pronged grounded outlet and make sure that the cord is properly grounded If you use a power source converter plug use an outlet with a ground terminal and screw down the ground line e Ensure that both ends of power cord are easily accessible e If you have to change the power cord please use the certified power cord that meets your region s safety standard D Information e How to secure the cable After connecting all of the cable to the terminals sevure them with the band When you secure the cables please be careful not to tignten too much Lea i 1 TITONNNUUIITITIUUUUUUNILL gy LITT
15. IONS continued RGB terminal D sub 15 pin connector Input signal No connection When different kinds of input signals are simultaneously input to the television via a graphics bord oniie like me selevisiom nly Suppor HN separate sync signal H sync G B ND T M D S Data2 12 TMDS Clock T M D S Data0 DDC CED Ground T M D S Data0 T M D S Data0 1 Hot Plug Detect T M D S Clock 14 15 r 17 18 9 40 Downloaded From TV Manual com Manuals PRODUCT SPECIFICATIONS continued With HDMI INPUT Signal mode Horizontal Dot clock Vertical frequency frequency Signal Name Resolution frequency Hz kHz MHz VGA 640x480 59 94 31 47 25 18 Po 480p 720x480 60 00 31 50 27 00 720 1440 x576 50 00 1563 2700 576p 720x576 50 00 3125 27 00 720P 60 1280x720 60 00 45 00 74 25 o O 720P 50 1280x720 50 00 37 50 7425 1080i 60 1920x1080 59 94 33 75 74 25 1080i 50 1920X1080 50 00 28 13 74 25 Signal mode Horizontal Dot clock frequency frequency Signal Name Resolution vee kHz MHz frequency Hz 720 x 400 70 09 31 47 28 32 SVGA 800 x 600 56 25 35 16 SVGA 800 x 600 72 19 48 08 50 0 1024 x 768 1024 x 768 e The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position Oo 640 x 480 59 94 31 47 25 18 J S Oo Vertical Position Horiz
16. ace are trademarks or registered trademarks of HDMI Licensing LLC Even if no special notation has been made of company or product trademarks these trademarks have been fully respected You may not alter decompile disassemble decrypt or otherwise reverse engineer the Software installed in this product which are prohibited by law Downloaded From TV Manual com Manuals ENGLISH SAFETY PRECAUTIONS For your safety please read the following precautions carefully before using this product Improper use would cause serious personal injuries and or damage to your property or this product The following are the symbols used in this manual and affixed on the unit itself Please fully understand the meanings of the symbols before reading the precautions in this section AN WARNING Never ignore the instruction There are risks of serious injuries or possible death to the user CAUTION Do not ignore the instruction There are possibilities of personal injuries and or property damage Other Symbols The triangle with illustration is intended to alert the users that there are possibilities of fire burst or high temperature if the product is handled improperly Each illustration within the triangle specifies the contents in detail The figure on the left is an example The circle with diagonal line and illustration is intended to prohibit the users from doing the indicated actions when handle the product Each illustration withi
17. alia and Malaysia East Europe Poland Sweden Hungary Russian Russia Arabic Arab countries Farsi Persian 24 Downloaded From TV Manual com Manuals MENU OPERATION continued With this menu you can adjust the display condition of the image which is inputting from the RGB terminals Setup Auto Adjust gt Image Position gt Horizontal Clock 41 Clock Phase tii Reset Reset Select lt p Set e Return Selected Items Setup hint Adjust Horizontal Position Vertical Position Horizontal Clock and Clock Phase automatically e Press or button to start auto adjustment Auto Adjust The message Auto Adjusting is displayed e Depending on the type of the signal there is a possibility that the display may not be adjusted in its optimum condition with this function In that case please adjust each iyem manually e Press button and A lt P button to adjust the horizontal gs Image Position and vertical display positions Horizontal Clock Minimize the vertical stripes on the screen Minimize the blurring of the letters and stripes on horizontal row e Make sure to adjust Horizontal Clock first before adjusting Clock Phase Clock Phase Image Position on this menu screen can be restored to the Original factory settings by pressing button D Information The items indicated by can be automatically stored the setting depending on the
18. all of the external connection cables and detach the anti tumble measures before moving the unit t may cause fire electrical shock or personal injuries Connect the power plug securely Improper connection will cause overheat and may result in fire Do not touch the blade of the plug while connecting it to the wall socket It could cause electrical shock f the plug is not fitted for the wall socket contact your dearly for replacement Do not handle the Power Cord with wet hands t could result in electrical shock Do not pull the cord when you unplug the Power Cord t may damage the cord and could result in fire or electrical shock Hold the plug when disconnecting it Unplug the Power Cord when unused the product for long periods of time Handle the batteries properly Improper or incorrect use of the batteries may cause corrosion or battery leakage which could cause fire personal injury or taint damage to the property Use only the types of the batteries which are indicated in this manual Do not install new batteries with used ones Install the batteries correctly by following the polarity and indications on the battery compartment Do not depose the used batteries as domestic waste Dispose them in accordance with the local regulations Downloaded From TV Manual com Manuals SAFETY PRECAUTIONS continued PRECAUTIONS E Do not install the unit in high temperature It could d
19. amage the cabinet or parts of the product Do not install near any heat sources such as radiator heat registers stoves or other apparatus that produce heat Keep the unit out of direct sunlight It could increase the temperature of the unit and cause malfunction Viewing Advice The lighting of the environment in which the product is used should be appropriate Too bright dark environment is not good for your eyes Take time to relax your eyes occasionally When you use this product keep away from the television 3 7 times of the vertical length of the panel This is the best viewing distance in order to protect your eyes against eyestrain Adjust the volume in appropriate level especially during the night When transporting this product When the product needs to be transported due to moving or repair use the carton box and buffer material comes with this product Do not keep this product lying sideways during transportation It could damage the panel surface or degrade the phosphors of the panel Keep away from the television when you use radio This television is designed to meet the international EMI standards due to prevent the interference against the radio However the unit may generate noise in the radio f the noise is in the radio please try the following actions e Adjust the direction of the radio antenna in order not to receive the interference radio wave from the unit e Keep the radio away fro
20. cause crack deformation and paint peeling e Do not wipe the cabinet with benzene thinner and other chemical products e Do not spray volatile solutions such as insecticide over the cabinet e Do not leave the cabinet in prolonged contact with plastic or rubber materials Do not use a chemical cloth cleaner or wax Depending on the ingredients it may cause crack and deformation Use a lint free cloth to clean the cabinet and control panel of the television In case of the heavy dirt wipe with a soft cloth moistened by a diluted neutral detergent solution and then wipe with a soft and dry cloth Never use the following detergents It could cause crack discoloration and scratch e Acid alkaline detergent alcoholic detergent abrasive cleaner powder soap OA cleaner car wax glass cleaner etc Downloaded From TV Manual com Manuals ENGLISH ABOUT LCD PANEL The following are the common phenomena when operating LCD Panel due to its structural reason Please note that they are not malfunctions e Defective Spots on Panel The LCD panel is manufactured with high precision technology However there might be some spots that are not emitted brighter than the others or in different colors etc e Surface on Panel The LCD panel displays images by blinking the fluorescent lamps internally This could raise the temperature of the display surface In addition do not impact strongly on the surface of the panel because LCD panel
21. cing such as inspection adjustment or repair work Do not disassemble Downloaded From TV Manual com Manuals SAFETY PRECAUTIONS continued N WARNING There is a risk of fire electric shock or serious injury Install the unit at a proper area where it does not expose anyone to any danger If you hit against the edge of the unit you may be injured Do not place any objects on top of the unit Objects such as Liquid containers vase fish tank flowerpot cosmetics or liquid medicine If water or any liquid spill onto the unit it may cause short circuit and result in fire or electrical shock In case that it happens turn off the Main Power unplug the Power Cord and contact your dealer immediately Do not place anything heavy on top of the unit Do not climb on or hang from the unit Do not let your pets get on top of the unit Do not expose this unit to rain or moisture Never use this unit in the bathroom or shower room Beware when you use this product outside especially in rainy or snowy weather and at the beach or waterfront When the product gets wet it could cause fire or electrical shock Unplug this unit during lightning storm To reduce the risk of electrical shock do not touch the product when starts lightning Disconnect the plug from the power outlet Do not do anything that may damage the Power Cord Do not damage modify twist forcibly bend heat or pull excessively the Po
22. ct This LCD Television has been designed to meet the International standards However it could cause personal injuries and property damage if improperly handled In order to prevent potential danger and obtain maximum benefit from your set please observe the following instructions when installing operating and cleaning the product Keep this manual for future reference and record the serial number of your set in the space provided on the front cover page of this manual e The information in this manual is subject to change without notice e This manual has been created with extra care In case that you have any comments or questions regarding this manual please contact your local dealer or our Customer Service Center e Before operating this set please fully understand the prerequisite such as specifications or constraints of the hardware and software We are not responsible and have no liability for any loss damage or injury as a result of misuse e Reproduction copying use modification and or transmission in whole or in part of this manual are prohibited without any prior written permission e All other products and company names used in this manual are trademarks or registered trademarks of their respective owners e VGA and XGA are trademarks of International Business Machines Corporation e VESA is a registered trademark of the Video Electronics Standard Association e HDMI the HDMI logo and High Definition Multimedia Interf
23. e based on your preference Picture E s Brightness HE 55 Color Temperature Cool Back Light High Reset Reset Select OK Set Z Return Selected Items Setup hint Contrast This adjusts the contrast to meet the lighting environment by using lt gt Bright With this function black is adjusted to change the overall oon brightness by using lt gt Color T t You can select from 4 settings default depending on the color a eeaemaeere condition with lt gt buttons Back Light e brightness of the Back Light for the maximum Each item on this menu screen can be restored to the original factory settings by pressing button D Information There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset every time 28 Downloaded From TV Manual com Manuals MENU OPERATION continued With this menu you can adjust and customize the audio condition as you like Selected Items Audio Matrix Surround Off Dynamic Bass Off Bass E o Treble EE o Balance E o Perfect Volume Off Reset Select lt gt On Off X Return Setup hint Matrix Surround Dynamic Bass Bass The surround sound is mixed to left and right in order to create the illusion of virtual surround speakers Recommendation when the Matrix Surround is on ensure the Balance is set to O for optimum surround sound effect
24. eeeees 13 When Following Messages Appear on the Screen 36 CONNEC TIOIN visio ie oocs cece ree sles 14 Symptom and Check LisSt cccceeeccceeeeeeeeeeeeeeeees 36 Terminal Positions 0 0ccccceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeaaas 14 PRODUCT SPECIFICATIONS ce eee 39 Connecting Procedure cccssssssseeeeeceeceeeessssseseeees 14 Signal NN s sarsii nEs ENERE E 40 BASIC OPERATION jiisitecscssssccccsiaieiinsabistiinivnvvieninnesdads 19 Recommended Signal List cccssssesseeeeeeeeeeeees 41 POWER On Off wiswssueanaanctesaassnaiadcdanmndventuitananddaadasncnsnns 19 IMPORTANT SAFETY INSTRUCTIONS Read this instruction thoroughly Retain this instruction for future reference Heed all warnings and cautions to prevent possible danger Follow all instructions Improper handling could cause personal injury and or serious damage to the unit that may shorten its service time Do not block any ventilation openings Install the product in accordance with the manufacture s instructions the symptoms when problems occur during installation or operation of the product f serious problems happen such as smoke or an abnormal odor from the unit turn off the Main Power unplug the Power Cord and then contact your local dealer immediately Downloaded From TV Manual com Manuals Thank you for purchasing the HITACHI LCD Television We hope that you will enjoy the great performance with this produ
25. eletext Teletext is the written information services provided by each TV channel Most TV channels provide information via Teletext such as Pe CL E Jise Page number e TV program schedule e Weather forecasts e Sports results r e Newsflash Red Green Yellow Blue How to operate the Teletext You can display the Teletext simply by pressing the remote control buttons Select Teletext language from Setup Menu shown on 24 To switch Teletext mode Teletext mode can be changed each time pressed in the following sequence TV gt Teletext gt Mix mode TV Text When user TV signal cable is not having Teletext signal That will show No Teletext Function OSD message To display Index page di e Index To access Subtitle service directly if the channel has the Subtitle service CJ broadcasting Subtitle To display Hidden text ex The answers of the Quiz or the Game page Press again to close the revealed answer Reveal To return to actual broadcast temporarily while searching for the Teletext page you request When the search is done the designated page will be displayed on the upper left of the screen Cancel Press again to return to Teletext page To access the link pages which are displayed at the bottom of the page OOOO Select the buttons corresponding to the colors of the letters on screen Color To hold the text picture i4 Hold P To change Teletext page ex Press P P
26. et Aerial Socket AV1 AV3 AV4 Monitor Out and Sub Woofer RGB HDMI o N D gi Pe NS Erg A yO Scao Side 9 AV2 10 Headphone output F D suce A Your television is ready for various kinds of connections Make a connection in the following steps Be sure to turn off the Main Power first when connecting external equipments 1 Connect Power Cord to the rear panel 2 Connect Aerial Lead 3 Connect your external equipments to the television if any 4 Connect the Power Plug to the Wall Socket 1 Connect Power Cord to Rear Panel pa Connect Power Cord to the television Make sure not to connect the Power Plug to the Wall Socket until all connections are completed 2 Connecting Aerial Lead There are two ways to connect Aerial Lead 1 When you do not have any other external equipment STB Connect the Aerial Lead directly into the Socket at rear panel 2 When you have one or more external devices to connect 1 Use RF cable to connect between each equipment and Antenna 2 Connect the Aerial Lead to an equipment In Socket marked 1 3 Connect the RF cable from the equipment Out to the other equipment In and VCR 4 Then connect from the equipment Out to ANT on the LCD screen Socket on marked II Example Connecting Antenna through STB Precautions when connecting the aerial e Please use a coaxial cable which is free from interference to connect the aerial
27. evision for the first time your television is at the original factory setting and cannot display the image normally on the TV screen Please select Auto Tuning and set TV channel 23 Downloaded From TV Manual com Manuals ENGLISH MENU OPERATION continued Selected Items Setup hint Auto NTSC3 58 Color System PAL Select the color system from 5 different modes SECAM Manual Tuning NTSC4 43 It allows you to skip unregistered channels automatically when you use channel up P down P buttons to select channels Regarding the unavailable channels this function will be set to On automatically to skip gt Increase the frequency data for the main tuner Fine Tuning lt Decrease the frequency data for the main tuner You can change the order of channels as follows 1 Move the cursor to the Channel row you want to change order and then press button 2 The color of the letters on the designated line will be turned into green bracket and with 3 Move the designated row by using A V buttons 4 Press button to fix the position e This function is not available grayed out when the Auto Tuning Mode is set to Direct Select Teletext Language from 5 different categories West Europe East Europe Russian Arabic and Farsi according to the area Example West Europe Asian countries where the Teletext is Teletext Language broadcasting in English such as Singapore Austr
28. g fire e Never mix used and new batteries in the device e Replace all the batteries in a device at the same time e Remove the batteries if the remote control is not going to be used for an extended period of time To avoid possible failure read the following instructions and handle the remote control properly e Do not drop or have an impact on the remote control e Do not spill water or any liquid on the remote control e Do not place the remote control on the wet object e Do not place the remote control under the direct sunlight or near sources of excessive heat As this product is heavy whenever it is moved two people are required to transport it safely When moving the unit hold it by the top and bottom frame of the LCD screen See the figures below for details RT ee donn p 12 Downloaded From TV Manual com Manuals PREPARATION continued Read SAFETY PRECAUTIONS 4 to 7 carefully besides this page The Desktop Stand has been used for the illustration in this manual When installing the main unit be sure to use the specified mount units in order to obtain maximum performance and maintain the safety We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or improper installation As for the installation instruction please read each user manual of the mount units for Desktop Setup Wall Mountin and Ceiling Mounting
29. haracters are displayed on the Try Auto Adjust whole screen the vertical stripes appear i om on A ABCDEFGHIS If the display condition is not improved with Auto Adjust and some of the characters are blurred abedefgABCDEFGabed ate Ie adjust Horizontal Clock in RGB mode only e When the letter string is displayed in Try Auto Adjust full screen all of the characters on Pecineaeesccsee ABCDEFGHIJ If the condition is not improved with Auto Adjust adjust the screen is blurred shed igasebercahca eee cee chee in RGB mode only you g ge When the small patterns are displayed on the screen the entire screen is flickering in RGB mode only Try Auto Adjust If the condition is not improved with Auto Adjust adjust Clock Phase till you gets flicker free display e The thickness of the letters lines etc is not displayed evenly It could happen when the image with more than 768 lines of vertical resolution is displayed in RGB mode only Please note this is not malfunction 38 Downloaded From TV Manual com Manuals PRODUCT SPECIFICATIONS SPECIFICATION 37LD9000TA Approx 37 inches 820 H x461 V mm diagonal 941mm Display dimensions Panel Resolution 1366 H x 768 V pixels including Stand 910 5 W x681 5 H x308 5 D mm excluding Stand 910 5 W x627 H x122 D mm including Stand 24 8kg excluding Stand 22 2kg Ambient Temperature Operating
30. his button to change picture size 8 13 Recall Pressing this button shows the input signal status 14 TV Text Teletext mode can be changed each time pressed in the following sequence TV gt Teletext Mix mode Sw 15 Return 10 You can use this to return to the previous menu 16 OK 11 17 Picture Mode 12 Picture mode can be changed each time pressed in the following sequence Dynamic Natural Cinema 18 Channel Up Down P P HITACHI 19 CHI II This is exclusively for TV audio A2 NICAM mode 20 Reveal 21 Sub Title 22 Cancel Some buttons are only for Teletext mode and other buttons have different functions in Teletext mode from the use of TV mode Those buttons are indicated by Refer to About Teletext on 31 Downloaded From TV Manual com Manuals 11 r ENGLISH PREPARATION This remote control operates on 2 AA batteries 1 Open the battery compartment cover e Slide opens the battery compartment cover on the backside of the remote control in the direction of an arrow 2 Installing the batteries e Install 2 AA batteries included making sure the polarities match the indication inside the compartment 3 Close the battery compartment cover e To close the battery compartment cover slide the cover in the direction of an arrow till it clicks shut It could cause corrosion or battery leakage and may result in physical injury and or property damage includin
31. iicccecistunssrestuurensivcietiaccwinneenns 8 Setup Menu RGB mode cccceceeeeeeeeseceeeeeeeeeees 25 Common phenomena of LCD Panel 0 0000ee 8 Picture Menu TV AV MOde ccccceceeseeeeeseeeeeeeeees 26 FEATURES scciiitinistectecesendanncniatinribdaaateaenndereiwenancncieiens 9 Picture Menu RGB MmOde ccccssessseeeeeeeeeeeeeeeees 28 SUPPLIED ACCESSORIES sicsscscsvedetinsesssvinsacesnsensecedivnexs 9 Audio NIST soctusicainnstssasanimedaeaniselamaisicetniannedvimaiscaiensss 29 COMPONENT NAMES cccccccecessseeeeseeceeceeeeeeeeeees 10 Timer Men ssion iaeaea Eare dka EEES 30 Main IT adeicetceeeecnseeceoeceeeacacendecetecececesestateeesaseteasease 10 FUNCTION sssrini araisa aaaeeeaa aaaea 31 Remote Control oe ccecc ccs uatcccasehnaciatcnucndeameecuasnumnbeioniin 11 Abo t Teletext icre een 31 PREPARAT ION saaaassssnnnesnssnnnennnnnnnnnennnnnnnennnnnnnnnnnnnnnn nen 12 Size SWIC ING sins ssadicesssannededdsdaccasicdundodmnmnanisaaaewseccnenas 32 Remote Control Batteries Installation 0 12 Audio Switching eves esciececctcdeecccanetensaenensdecenutacusaleee 34 Caution When Moving the Main Uniit cee 12 Power Save MOdG ssssseseeeeceeceeessseseseeeeeeeseees 35 Safety Precaution on Main Unit Installation 13 TROUBLESHOOTING vscleciiccctnscceccdcssiswerrescctnnciniceceuaes 36 Anti Tumble Measures cccecceeeeeeeeeeeeeeeeeee
32. m the television e Use coaxial cable for the antenna E About the infrared communication devices The infrared communication devices such as cordless microphone or cordless headphone may not be available around the television It is because of the communication failure Please note that this is not malfunction E When you dispose this product at the end of its life follow the regulations at your residential area For more information contact the local authority or the dealer where you purchased the product E Please avoid installing the TV directly on the wooden floor Depending on the quality and condition of floor the desktop stand may stick to the floor face and surface could come off when the TV is lifted up Please make sure to unplug the power cord before cleaning the television E How to clean the LCD panel of the television Wipe the panel with a lint free and dry cloth in order to prevent damage to the panel surface Do not use a chemical cloth or cleaner Depending on the ingredients it may cause discoloration and damage the panel surface Do not wipe with a hard cloth or rub hard It may hurt the panel surface In case of the greasy dirt such as fingerprint wipe with a lint free cloth moistened by a diluted neutral detergent solution and then wipe with a soft and dry cloth Do not use a spray cleaner It could cause malfunction m How to clean the cabinet of the television The following may
33. n this symbol specifies the contents in detail The figure on the left is an example The blacked out circle with illustration is intended to constrain the users to follow the indicated actions when handle the product Each illustration within this symbol specifies the contents in detail The figure on the left is an example There is a risk of fire electric shock or serious injury E Unplug the power cord immediately when serious problems happen Serious problems such as Smoke abnormal odor or sound comes out from the product No picture no sound or distorted picture on the display Foreign objects such as water metals etc get inside the unit Do not continue using the product under these abnormal conditions Turn off the Main Power unplug the Power Cord and contact your dealer immediately Disconnect the plug from the power outlet For your safety never try to repair the product by yourself E Do not insert liquids or any foreign objects such as metals or flammable items inside the unit Incase it happens turn off the main power unplug the Power Cord and contact your dealer immediately Use special caution when younger children are around the unit E Do not remove cover or modify the product High voltage components are installed inside of the unit Removing covers can expose you to high voltage electrical shock and other dangerous conditions Contact your local dealer to perform servi
34. ntinued CAUTION Do not place the unit at the dusty place It could cause malfunction Do not cover or block any ventilation holes on the product The television would overheat and it could cause fire or damage the product which may shorten its service life Install the product in accordance with the instructions in this manual Do not place the unit with ventilation side down A N Do not install the unit on the carpet or bedclothes Do not cover the television with tablecloth etc Be sure to ground the earth cable correctly Especially when you use Power Cord adapter be sure to connect the earth cable to the ground terminal Incorrect connection would cause fire or electrical shock For your safety always make sure to unplug the Power Cord before connect or disconnect the earth cable Supply connect the ground wire Follow the Anti tumble measures in this manual f the television tumbles down there is a risk of personal injury and possible death Also it would damage the product seriously Do not install this product near the medical devices To prevent malfunction of the medical devices do not use this product and the medical devices in the same room Do not place the CRT based television near the speaker of the LCD Television t could cause the partial discoloration or blurring of the image on the CRT based television Please install it away from the speaker of the LCD Television Disconnect
35. ol does not work Check the connection of the external equipments Normal picture but no color normal sound p Check the Color in Picture Menu 36 Downloaded From TV Manual com Manuals TROUBLESHOOTING continued Symptoms No picture The Indicating lamp Off No picture The Indicating lamp Orange It means that the unit is in Power Save mode No picture The indicating lamp Green The top of the television and surface of the panel heat up Image cannot be displayed in the correct position When the VCR is in special playback features Fast forward or Rewind the screen gets dark and cannot see the image at all Screen display size cannot be switched correctly Downloaded From TV Manual com Manuals Cannot be displayed the image from HDMI Check list Check if the Power Cord is plugged into the socket firmly Check if the Main Power is ON Check if all the cables of the external equipments are connected correctly and firmly Check if the power of the external equipments is ON Check if the TV AV mode has been selected correctly Check if the PC is in Power Save mode or not Refer to Power Save mode and When following messages appears on the screen Check if the signal cable is connected correctly and firmly Adjust the level of Brightness and Contrast lower It may happen when you use the unit for long hours Turn off the Main Power of the
36. ontal Clock and Clock Phase e The television may fail to display an animation image correctly when a signal having a vertical frequency of 72Hz or higher is input to it e The television differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal polarities Note that different signals having all these elements alike may be handled as the same signal e Displaying images with more than 768 lines of vertical resolution a Full display compressed display can result in the interpolation of stripes 41 Downloaded From TV Manual com Manuals r ENGLISH
37. ot available by PC mode when receiving RGB signal You can select from 4 settings default depending on the color Color Temperature condition with lt gt buttons User Back Light Midde _ Adjust the brightness of the Back Light for the maximum visibility Each item on this menu screen can be restored to the original factory settings by pressing button ED Information The items indicated by can be stored the setting for each of inputs and picture modes Dynamic Natural Cinema You can enjoy different setting depending on the selected input such as VCR in AV1 26 Downloaded From TV Manual com Manuals MENU OPERATION continued Selected Items Setup hint The noise on the screen or interference could be reduced especially at the area of weak electric field On Automatically identify if it is the movie film and faithfully reproduces the original film images Off Set to Off if the image does not look natural during turning on This is available only when receiving NTSC PAL 3D Comb Filter composite signal This reduces the dot and color blurring in minute scales so that it can reproduce purer color Black Enhancement Adjusts the black level compensation Each item on this menu screen can be restored to the original factory settings by pressing button Downloaded From TV Manual com Manuals 2 ENGLISH MENU OPERATION continued In this menu you can make specific adjustments for the RGB pictur
38. rizontally Squeeze squeezed D Information Aspect ratio represents horizontal vertical ratio on screen The size will fix as Full mode and not change when receiving the AV3 4 component signal HDMI signal of 720p 50 720p 60 1080i 50 1080i 60 CAUTION Using a wide screen television This television has a screen mode selection feature If an incompatible screen mode is selected to play certain software such as a TV program the image would appear different form the original Take this into consideration when making screen mode choices Use of the wide feature displaying enlarged pictures in coffee shops hotel and other establishments for commercial or public viewing purposes could infringe on the copyright holder s right protected by Copyright Law When a normal 4 3 image not wide screen is displayed over the entire screen in the Panoramic mode the peripheral image may disappear partly and or appear distorted in some cases Use 4 3 mode to view the image reflecting original intention 32 Downloaded From TV Manual com Manuals FUNCTION continued RGB signal input You can select a suitable size depending on the resolution Full gt 4 3 Display Area Selection Diagram 640X480 VGA 800 X 600 SVGA 1024X768 XGA Downloaded From TV Manual com Manuals 33 r ENGLISH FUNCTION continued Sound Multiplex TV mode You can make optimum use of available a
39. signal mode 25 Downloaded From TV Manual com Manuals ENGLISH MENU OPERATION continued In this menu you can make specific adjustments for the picture based on your preference By pressing button at the Wbottom of each menu page the next Picture menu page will appear on the screen Page 1 Page 2 Picture Picture Dynmaic On Contrast E 50 Film Mode On Brightness E 5 3D Comb Filter On Color E S Black Enhancement Middle Sharpness E Reset Reset Tint E o Select OK Set Xe Return Color Temperature Cool Back Light High Reset Reset Select OK Set elReturn Selected Items Setup hint Dynamic You can make the better selection from 3 modes depending on the lighting condition and intended use Picture Mode Dynamic Suitable for the brighter conditions Natural Suitable for the normal lighting condition Cinema Suitable for watching movie 7 This adjusts the contrast to meet the lighting environment by l 2 With this function black is adjusted to change the overall Brightness ai brightness by using lt gt 0 100 Pa adjust color density based on your preference by using x 0 12 Preferred sharpness can be adjusted by pressing lt Sharpness button for Softer image or button for Sharper image Pressing lt button enhances red and weakens green while o 45 45 pressing button weakens red and enhances green Ting The setup Tint is adjusting for the realistic skin color This is n
40. tely User Manual Remote Control AA size batteries Power Cord X2 BS Type The type of power plug provided may be different from this drawing for some countries Downloaded From TV Manual com Manuals ENGLISH COMPONENT NAMES Main Unit Front Panel Cabinet Panel Indicating Lamp Remote Control Receiver Speaker Desktop Stand oe 2 eS SS Main Power Switch on the left side Rear Panel 1 Side Input 2 Power Cord Socket 3 Terminal Board External Device Connection 4 Control Panel see below for details Please refer to _ 14 18 for the detailed information for the connections 37LD9000TA 4 S E Control Panel These buttons are located on the E Sub Power button Menu button Program UP A button Program DOWN button Volume UP aa gt button Volume DOWN Saal lt button Input OK button N OO FP W DY 10 Downloaded From TV Manual com Manuals COMPONENT NAMES Continued Remote Control 1 Power ON OFF 2 Color Red Green Yellow Blue 1 3 TV Select TV Press this button to change input to TV 4 Input Select AV1 AV2 AV3 AV4 HDMI RGB 3 Press this button to change input mode 5 Program Select 4 Press these buttons to select a TV program directly 6 Freeze Hold Press this button to change the picture to freeze mode 5 7 MENU 8 Cursor 9 Volume Up Down 6 10 MUTE 7 11 Index 12 Picture Size Press t
41. to increase decrease page number of Teletext P P ED Information e Some Teletext pages do not display Link Pages at the bottom of the screen Press button to display them MENU e When in Teletext mode press button that can show the Back light function of OSD menu User can easily control brightness of the panel 31 Downloaded From TV Manual com Manuals ENGLISH FUNCTION continued display size is switched in sequence and the status will be displayed at the bottom of the screen wk bJ 5 a TV AV signal input TV AV1 AV2 AV3 AV4 HDMI l Picture Size 4 3 Panoramic HITACHI CLE 983 Full Cinema Each time button of the remote control is pressed the screen E D u vP You can display the image at optimum condition by selecting display size depending on the current output image as shown below Current Output Image Display Size To display suitable screen as follows Input Signal r Play a 4 3 image on screen faithfully Blanking occurs on both sides 4 3 Signal Panoramie Play a 4 3 image which enlarges horizontal and vertical size of the ignal middle in equal scales and displays both sides appearing much wider Ci Play a 21 9 image in 4 3 image Cinema size expanding vertically S inema x i i In some case slight blanking may remain at the top and bottom OC oO Full Play a 4 3 image faithfully in the standard vertical size and ho
42. udio by pressing bottom of remote control Audio can be switched only if receiving sound multiplex signals otherwise pressing this button will have no effect such as when only mono sound is received These can be divided into two main categories Bilingual Dual Sound broadcast and Stereo broadcast Bilingual Dual Sound broadcast Bilingual broadcast is the broadcast available on the main and sub languages while dual sound broadcast is available on the primary and secondary sounds for example some sports programs contain broadcast commentary on a game as primary sound and a commentary about a team as the secondary When bilingual program is received sound mode display appears in yellow as shown Each time button is pressed the display is switched in the sequence of following Sound multiolex sianal Green Yellow Yellow m m I Main language Primary Sound Il Sub language Secondary Sound Vv force mono This selects main language or primary sound Stereo broadcast With stereo broadcast you can enjoy different sound from either side When a stereo program is received sound mode display will appear in red as shown Press button to switch between stereo and mono sound Sound multiplex signal lt lt Red Green PL OL CO Stereo V Force Mono e Please select V force mono in case of poor reception noise poor stereo sound due to signal condition so that you can receive a clear mono sound e
43. unit for a while Please note that this is not malfunction Press button to check if the input signal of the displayed image is compatible with the specification of the television It could happen when the VCR is connected to Component output such as 480i This is not malfunction Try Composite output or S video output and check the picture again The display size is fixed at Full when the receiving signals are 1080i 60Hz 1080i 50Hz 720p 60HZz or 720p 50Hz Check the signal status by pressing the button on the remote control Check if the cables are connected correctly Check the output format of the equipments Please refer to Connecting Procedure and Recommended Signal List 37 ENGLISH TROUBLESHOOTING continued Symptoms Check list e The image on the screen is moving in Pare ae an oblique direction ay ne j a e Adjust Horizontal Clock and Clock Phase in RGB mode only See e Try Auto Adjust The coarse horizontal stripes could be seen in full display mode e Adjust Horizontal clock in RGB mode only The part of the image is lacking ii in RGB mode only e Check the Signal status of the PC by pressing button The horizontal stripes are moving toe aoe on the remote control vertically with flickering screen in RGB mode only e If the Vertical Frequency of the PC is set to less than 70Hz adjust its level higher up to 70HZz When the c
44. wer Cord Do not place heavy objects including the unit itself on top of the Power Cord Ifthe Power Cord is damaged contact your dealer for repairs or exchange Use only with designated power supply voltage To prevent the risk of fire and electrical shock operate this product only with the power supply voltage indicated on the unit Beware not to drop or have any impact on the unit Take extra care while moving the unit There is no protection glass on the surface of the LCD panel Thus do not press the panel surface with your fingers or hands Or do not hit anything against the television These actions would damage the LCD cells or the panel surface and could cause the failure or personal injuries In case that you drop the unit or the cabinet is damaged turn off the Main Power unplug the Power Cord and contact your local dealer immediately Continuing use of the product with above conditions would cause fire or electrical shock Clean dust or metals on or around the blade of the power plug regularly Continuing use of the product with above condition may cause fire or electrical shock Always unplug the Power Cord first and clean the blade with dry cloth Do not place the unit on an unstable surface Unstable places such as Sloped place or shaky rack table stand or trolley lf the unit falls down it could cause personal injury Downloaded From TV Manual com Manuals ENGLISH SAFETY PRECAUTIONS co
45. when the selection is fixed MENU 4 Press button to exit from the entire OSD menu 22 Downloaded From TV Manual com Manuals MENU OPERATION continued With this menu you can access various kinds of features relating to TV channel settings Setup Manual Tuning Fine Tuning Sort Teletext Language Select Ok Set Fe Return Selected Items Setup hint Select the way to display the channels on the screen Position The position numbers are displayed on the screen 1 125 Auto Tuning The channel number 1 57 are displayed as Cx and the ee channel number 101 142 are displayed as Z Tune the local channels automatically Search Press button to start searching Pa Press lt P buttons to input position number 1 125 or channel Position number Cx or Z When Auto Tuning Mode is set to position search the frequency by using lt P buttons Frequency When Auto Tuning Mode is set to Direct this function is not available grayed out 1 Move the cursor to the first digit and select the letters with AY buttons 2 Move to the next digit with button Manual Tuning 3 Press button again when you finish inputting all the letters The selectable letters are as follows O 9 A Z J u blank _ under line and period Sound System Select the sound system from 5 different modes When you turn ON the tel
Download Pdf Manuals
Related Search