From Here
Contents
1. On to preview and review video using all of your devices screen this may stretch or distort the image very slightly Set to Off to preview and review video in exactly the same format it was recorded Default settings Press this to return the DVR software to the default factory settings Wi Fi and internet connection The device incorporates built in Wi Fi so that you can wirelessly update the maps on your device download useful apps and browse the internet Connecting to Wi Fi Check you are in a location with an internet enabled Wi Fi connection and that you know the login and password details to enable you to access this Wi Fi service Power on your device and press Settings in the main menu At the top of the list you will see Wi Fi Tap the button to the right hand side of the screen to switch Wi Fi on the button will change to blue in colour Next tap on the word Wi Fi itself to enter the Wi Fi settings The device should automatically display a list of Wi Fi services that are in range If no Wi Fi services are displayed press the small drop down menu displayed in the top right hand corner and select Scan to search for any Wi Fi services in range of your device When you see the Wi Fi service you require press it with you finger to connect A pop up box will be displayed prompting you to enter the password Enter the password and press Connect Your device will now automatically connect to the int2. Auto is selected the unit will automatically switch between the day and night settings The time the unit switches between day and night is pre set and cannot be changed Day You can adjust the day time brightness of the screen as follows Press Day and adjust the brightness of the screen by pressing the and buttons To save the setting press OK Night You can adjust the night time brightness of the screen as follows Press Night and adjust the brightness of the screen by pressing the and buttons To save the setting press OK Once you have adjusted both the Day and Night brightness select Auto and then OK to save the setting If you do not select Auto the screen will not switch between day and night automatically Volume control AGR520 To adjust the volume press the middle of the screen to access the Navigate menu and then press the Device settings button Scroll until you see the Volume button and press it once Increase or decrease the volume by pressing the or buttons To test the volume press the Test button To reset the volume to the default setting press the Reset button Finally Press the OK button to save your preferred volume setting Volume control AGR700 Use the volume control situated on the top left hand side of the device to adjust the volume Language Use this setting to change the language you require Press t
3. D and E does not exceed 5000kg Passage forbidden through tunnels of category D and E C D Tank carriage Passage forbidden through tunnels of category C D and E Other carriage Passage forbidden through tunnels of category D and E C E Tank carriage Passage forbidden through tunnels of category C D and E Other carriage Passage forbidden through tunnels of category E D Passage forbidden through tunnels of category D and E D E Bulk or tank carriage Passage forbidden through tunnels of category D and E Other carriage Passage forbidden through tunnels of category E E Least restrictive Passage forbidden through tunnels of category E NORMAL Passage allowed through all tunnels For UN Nos 2919 and 3331 see also ADR 8 6 3 1 User note For mixed loads you should choose the MOST restrictive category Please see following page for ADR Tunnel Codes Disclaimer ADR Tunnel Codes and basic explanation of tunnel codes Disclaimer This content gives general guidance only and should not be regarded as a complete or authoritative statement of the law The user guide will be updated to reflect any developments in new legislation or case law 34 Brightness To adjust the brightness press the middle of the screen to access the Navigate menu and then press the Device settings button Scroll until you see the Brightness button and press it once You can choose from 3 different settings Auto Day and Night Auto If
4. You can select the correct speed limit for your vehicle type as follows e Car Advisory speed limits for a vehicle will be displayed e Caravan Advisory speed limits for a vehicle towing a caravan will be displayed e Motorhome advisory speed limits for motor homes will be displayed e Truck 3 5t 7 5t Advisory speed limits for this size of truck will be displayed e Truck 7 5t 12t Advisory speed limits for this size of truck will be displayed e Truck 12t and above Advisory speed limits for this size of truck will be displayed Make your selection and press the Return button to save and exit Note These are advisory speed limits only and are subject to change It is the driver s responsibility to check local speed limits and abide by local driving regulations User speed alert Set your device to alert if you accidentally exceed the posted speed limit To set the User speed alert warning use the up and down arrows to increase or decrease the value over the posted speed limit you would like the device to alert at For example if you would like the device to alert at 5mph over the posted speed limit ie 35mph in a 30mph zone set the value to 5 Make your selection and press the Return button to save and exit Journey history Set your device to record and save the details of each journey you take Make your selection and press the Return button to save and exit Report mobile speed
5. and OK Press OK to proceed You can set Office using one of the following options Find address Find by POI Find using Recent routes and Save using current location To calculate a route to Office press the middle of the screen to access the Navigate menu and then press the Home icon The unit will display details of the destination and the various Route settings available Press the small map icon found at the top right hand corner of the screen to view the location on the map Press the small menu icon to change or delete the location saved as Home You can also use the small menu to change the start location or add a Via point to your journey Finally press the Calculate button to move to the Summary screen and start your journey Last journey or Clear route The unit stores the last journey you have travelled so that if you want to go back to that address your do not have to input the details again To do this press the middle of the screen to access the Navigate menu and then press Last journey and a route will automatically calculated to the last destination selected Once a route has been calculated the Last journey icon will be replaced with a Clear Route icon To cancel a route press the middle of the screen to access the Navigate menu and then press Clear Route 16 10 Multi stop route generator If you want t
6. Navigation will begin automatically within 10 seconds if you do not touch the screen or you can press the Aguri logo to proceed immediately If you want to spend more time viewing the Summary screen tap anywhere on the screen to stop the automatic countdown Further options are available if you press the small drop down menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road Once you are ready to proceed press the Aguri icon to start navigating Route by nearest POI This function will help you to find the POI s near to your current location or POIs around an alternative location To navigate using this function press the middle of the screen to access the Navigate menu Next scroll until you see the Route by nearest POI icon and press it once Your current location or the last location that the device was powered on at will be displayed with a list of all POIs displayed in distance order shown in the window below To fine tune the list of POls displayed or to find a particular POI press the All categories button and swipe the screen up or down to scroll through the various options available Once you have found the option you require
7. add a Via point press the small drop down menu displayed at the top right hand corner of the screen Once the calculation is complete the summary screen will be displayed confirming the address you wish to navigate to your start point your distance to the destination your estimated arrival time your estimated journey time and any Route settings you may have selected Navigation will begin automatically within 10 seconds if you do not touch the screen or you can press the Aguri logo to proceed immediately If you want to spend more time viewing the Summary screen tap anywhere on the screen to stop the automatic countdown Further options are available if you press the small drop down menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road Once you are ready to proceed press the Aguri icon to start navigating Route by map This function allows you to navigate to a destination by selecting any road on any area of the map To navigate using this function press the middle of the screen to access the Navigate menu and scroll until you see the Route by map icon The screen will then show a section of the map You can zoom in and out of the
8. front of your vehicle as well as recording all audio within range of the built in microphone The device s built in GPS antenna will automatically record the GPS track of your journey and all video audio and trip information can be reviewed directly on the device s LCD The DVR dash cam is set to start recording automatically as soon as your device is powered on however you must ensure that an SD card has been installed first Your device comes as standard with an 8GB SD card but the device will support up to a 32GB SD card if you would like to increase the memory size To access DVR Playback and Settings press the DVR dash cam icon on the main menu to launch the DVR app Next swipe the centre of the screen from left to right and the device will display a Settings button and a Playback button Select the Playback button to review any video or photographs and press Settings button to access the DVR settings menu Swipe the screen from left to right to display the Settings and Playback buttons Playback button Settings button Record button Press to take a still photograph Latitude N A Longitude N A Speed N A gt Playback Press to review video and GPS data recorded plus any photographs saved After pressing the Playback button select Video You will then see a list of folders in date order Each file contains the video and GPS track footage recorded and saved on each d
9. map by pinching and stretching the screen with your fingers as well using your finger to move the map around until you find the location you are looking for When you see the location you require press on the road on the map with your finger and the name of the road together with the coordinates will be displayed at the top of the screen Press the tick button to proceed User note It is easier to select the road you are looking for by zooming more closely in to the map Once you have pressed the tick button information about your chosen destination will be displayed together with the Route settings you can select for this journey e To start your journey press Calculate e To view the destination point of this route on the map press the Map icon displayed at the top right hand corner of the screen e To return to the previous screen press the Return button e To change the start location or add a Via point press the small drop down menu displayed at the top right hand corner of the screen Once the calculation is complete the summary screen will be displayed confirming the address you wish to navigate to your start point your distance to the destination your estimated arrival time your estimated journey time and any Route settings you may have selected Navigation will begin automatically within 10 seconds if you do not touch the screen or you can press the Aguri logo t
10. or more trailers Load type None normal Hazardous Hazardous goods that are not explosive or harmful for water Explosive and Flammable Harmful for water Enter Tunnel Category if applicable to your vehicle ADR Tunnel Codes Select one of the applicable tunnel codes Please note that Normal is selected by default The tunnel category codes consist of an individual letter from A to E this will be indicated by the use of road signs and or signals Restrictions will not apply to category A tunnels as these are unrestricted and do not require any signage A basic explanation of tunnel codes Tunnel category A or Normal B Most restrictive Passage forbidden through tunnels of category B C D and E B1000C Carriage where the total net explosive mass per transport unit exceeds 1000 kg Passage forbidden through tunnels of category B C D and E does not exceed 1000 kg Passage forbidden through tunnels of category C D and E B D Tank carriage Passage forbidden through tunnels of category B C D and E Other carriage Passage forbidden through tunnels of category D and E B E Tank carriage Passage forbidden through tunnels of category B C D and E Other carriage Passage forbidden through tunnels of category E Passage forbidden through tunnels of category C D and E C5000D Carriage where the total net explosive mass per transport unit exceeds 5000 kg Passage forbidden through tunnels of category C
11. press it once to select it All POls available within this category will be displayed in distance order from your current location or the location displayed If you would like to look at POIs near to a different location press on the address box displayed at the top left hand corner of the screen A list of options will be displayed enabling you to find the alternative address you require Once you have located the address a new list of POIs will automatically be displayed in the window below The POIs displayed will be in distance order from the new address you have selected To fine tune the list of POls displayed around the new address or to find a particular POI press the All categories button and swipe the screen up or down to scroll through the various options available Once you have found the option you require press it once to select it All POls available within this category will be displayed in distance order from the new location displayed Once you have found the location or address you require press it once Information about your chosen destination will then be displayed and you can set the Route settings you prefer for this journey e To start your journey press Calculate e To view the destination point of this route on the map press the Map icon displayed at the top right hand corner of the screen e To return to the previous screen press the Return button e To change the start location or
12. safely as possible For more information please follow the detailed instructions provided below User note Whilst all Aguri satellite navigation systems have been designed to provide safe and efficient routing they are not a substitute for driving with due care and attention The driver is fully responsible for paying attention to road signs road conditions other road users legal road restrictions pedestrians and the operation of their vehicle at all times Detailed Operating instructions Navigation Power on the unit by pressing and holding the power button on the top left hand side of the unit The unit will take a few moments to boot up and will then display a menu of the main features of the device To launch navigation press the Navigation button The following warning message will be displayed Please do not attempt to operate your Aguri navigation system whilst driving Whilst this navigation system has been designed to provide the most appropriate route for you vehicle it is not a substitute for driving with due care and attention The driver is fully responsible for paying attention to all road signs legal restrictions road conditions other road users pedestrians and the operation of their vehicle at all times Please read the warning and press Start if you would like to continue 10 Navigation map view explained 3 10 i A5145 NOW 14 13 11 tavw4Voor Road 12 19 15 16 Lane
13. sensor to suit your requirements Shock sensor Turn the built in shock sensor on and off Emergency record If Emergency record is switched on and you are within the DVR App you can touch the LCD anywhere to automatically save and lock a section of video recorded to ensure it is protected User note This is not recommended for normal vehicle use LCD brightness Adjust the LCD brightness level when in DVR mode Run in background Set to on if you would like the DVR to automatically run in the background when you are using the navigation software Recommended Show Record icon Turn this on and you will see an additional REC icon displayed on top of the navigation view when you are using the navigation software User note If switched on the REC icon can obscure some elements of the navigation software We recommend to switch this off when using the navigation software as a blue LED style icon is also displayed at the top left hand side of the top information bar to indicate that the DVR is recording Delete file for record When set to On the DVR app will automatically start to record over the oldest footage on the SD card once the SD card is full If set to Off the DVR will stop recording once the SD card is full and you will have to manually remove video files recorded to create more space We highly recommend that this feature is set to On for normal vehicle use Preview full screen Set to
14. traps Please note this function will only work if you pair your device with an internet enabled Android Smart phone See more detailed instructions later in this manual Record and share the locations of Mobile speed traps with other user s Make your selection and press the Return button to save and exit Live Digital Traffic Service download frequency Please note this function will only work if you pair your device with an internet enabled Android Smart phone See more detailed instructions later in this manual As our Live Digital Traffic service uses your Smart Phone s internet connection on the move it will need to use your data package The more often you choose to connect the more data will be used which in turn could cost you more money depending on the phone contract you have Choose how often you would like your device to connect and then press the Return button to save and exit Show POI Use this function to choose which POI Point of interest icons you want to display on the map The default setting shows all POI icons on the map but you can choose to display only the ones you want or none at all Press the middle of the screen to access the Navigate menu and press the Device settings button Scroll until you see the Show POI icon and press it once Select the POI s you would like to display on the map and press the Return button to save and exit 2Q 30 GPS status This functi
15. View displays the lane or lanes that you can use or should be using depending on the vehicle you are driving and the junction or intersection you are approaching Please note that Lane View is only available for motorways dual carriageways and complexand major inner city junctions Visual warning of approaching speed trap hazard or other legal restriction Displays the road name or number of the next road you need to turn on to Distance left to destination Time left to destination Estimated time of arrival Icon displaying next manoeuvre required Distance to next manoeuvre required Speed limit display displays the speed limit of the road you are travelling on 11 Displays your speed of travel 14 12 13 14 15 16 17 18 19 9 BERI 4 7 55 miles 5 0 12 left 15 18 ETA 6 17 18 Name or number of the road your are currently travelling on GPS compass Indicates your current direction of travel Icon showing current position of your vehicle Icons showing location of speed traps hazards and other legal restrictions Return back and exit button button Please note that if you press this when in the DVR app you will exit close and stop the dash cam from recording If you want the unit to carrying on recording in the background press the Menu button 16 to exit Short cut to main system menu Short cut to switch between other Apps you may have open on the device at the same time Increase volu
16. alternative is to pair a compatible Android Smart Phone with the AGR700 however downloading maps using the 3G or 4G internet connection on your Smart Phone could be expensive depending on the data plan you have with your Smart Phone contract Registering for Google Play and downloading Apps If you would like to add additional Apps to your device you will first need to register and create a Google account so that you can use the Google Play Store Creating and adding a Google account to the device is completely free but you will need to do this before you can download any new Apps to the device User note If you have already created and added a Google account to the device to enable you to wirelessly update the unit s mapping and Speedshield speed trap database you will already be able to access the Google Play Store and download Apps and therefore will not need to repeat the process outlined below From the main menu select Settings then scroll down until you see ACCOUNTS and press the Add account button From the list displayed select Google and a new window will appear called Add a Google Account If you already have a Google Account select Existing if you do not have a Google account press New Follow the on screen instructions to create and activate your Google account on the device Once you have added a Google account to the device you will be able to add your own se
17. alytic converter Before you travel into a LEZ you need to find out the emissions standard of your vehicle All LEZ s affect heavy duty goods vehicles usually over 3 5 tonnes Gross Vehicle Weight GVW and most buses and coaches usually defined as over 5 tonnes GVW Some LEZ s also affect vans cars and motorcycles Most LEZ s operate 24 hours a day 365 days a year with some of the Italian LEZ s currently the only exceptions to this rule 30 Motorhome amp Caravan edition To enable the unit to calculate a suitable route you need to input certain attributes such as the height width and weight of your vehicle You can create and save the settings for up to 10 different vehicles Press the middle of the screen to access the menu and press the Device settings button at the top of the screen followed by the Caravan Motorhome icon Name Enter the vehicle name here Height Enter the vehicle height here User note Ensure that this includes any items such as roof boxes or TV antennas Length Enter the vehicle length here Width Enter the vehicle width here Weight Enter the vehicle weight here User note When entering information on a caravan the maximum values for height length width and weight must also include the details of the vehicle towing the caravan For example the wing mirrors of a car may be wider than the caravan being towed Also please ensure that the combined weight of the vehicle and ca
18. ated route including the distance and estimated travel time for each so you can determine which route to take User note If you want to use Live Digital Traffic services you will need to pair your navigation device with an internet enabled Android Smart Phone Please note that you may be charged for the mobile data the navigation device uses depending on the mobile data package you have as part of your Smart Phone contract Press the small drop down menu in the top right hand corner to change your start location or add a Via point to your journey User note Look out for the small drop down menus that appears on many of the data entry screens These small drop down menus contain useful additional options to help you tailor the routes calculated by the device Map views Press the small map icon in the top right hand corner to view the route and destination point on the map Once in map view you can press the small drop down menu displayed in the top right hand corner to change the map view between the navigation map view Google Maps and Google Streetview User note You can drag the map around with your fingers and pinch and stretch the screen to zoom in and out of the map To return to the Route settings screen press the Return button at any time Press Calculate to start navigation Summary screen The Summary Screen will give you the distance to your destination along with the estimated tim
19. automatically start recording as soon as the device is powered in the DVR app will also launch at this point To send this to the background whilst still in Record Mode press the Menu button Ea Do not press the Return Exit button or the DVR app will close and it will stop recording 4 Navigating To begin navigating press the Navigation button Please note that it can take a few minutes for the unit to boot up and then to achieve a satellite lock the first time you use it We recommend you stay in a stationary position in a location where the unit has a clear view of the sky to ensure the fastest results Subsequent start ups will be much faster however and your device will locate satellites within a few seconds when used regularly Once satellite lock is achieved the screen will indicate your current position on the map view displayed User note Truck and Motorhome amp Caravan editions only If you have the Truck or Motorhome amp Caravan edition an additional screen will be displayed at this point asking you to select your vehicle type If this is the first time you have used the device you will need to enter the attributes of your vehicle now More details are about how to set up and enter your vehicle attributes can be found later in this manual Once your vehicle details have been entered your device will calculate a route based on the attributes saved 5 Calculating a route using a post code or address Touch the centr
20. ay the device was used e Press the Play button to review the video and GPS track footage recorded e Press the Delete button to delete the video and GPS track footage recorded e Press the Share button to share the video and GPS track footage recorded by one of the methods shown Settings Video loop time min If you have chosen to record in loops you can select how long you would like each loop to be Delete for record Eo loop time min Image AY Preview fullscreen a Con E Co W t an 4 pan Shock sensor sentivity Shock sensor Emergency record e ie gt LCD brightness Show Recordicon Run in background co 42 Image quality Choose the level of image quality you would like to record in User note If you select a higher image quality the video recorded will be clearer However if the image quality is higher each video file recorded will also be bigger and will take up more room on the SD card As a result older video footage will be over written more quickly once the SD card is full User note If you are involved in an accident it is always advisable to remove the SD card immediately to ensure that the video recorded of the event is not lost Shock sensor sensitivity Your device is designed to save any video footage it thinks is related to an event or accident It does this by using a built in shock sensor to sense for any impacts or hard breaking You can adjust the sensitivity of the shock
21. d alert 38 38 38 38 38 39 39 39 40 41 44 45 45 46 46 47 48 49 50 Tight bend alert Motorhome amp Caravan and Truck Edition Journey history Report mobile speed traps Live Digital Traffic service Show POI icons on map GPS status Live Digital Traffic Unit version details Mini drop down menu DVR dash cam operation Connect to and Browsing the internet Updating the mapping Updating the Speedshield speed trap database Registering for Google Play and downloading Apps Digital Live Traffic services amp Mobile speed trap reporting Using Live Digital Traffic services Using the Mobile speed trap sharing feature Disposal of Old Electrical amp Electronic Equipment Service under warranty Aguri AGR520 Series What s in the box 1 x Aguri AGR520 PND portable navigation device 1 x Micro SD card for DVR player 1 x USB cable 1 x Vehicle charger 1 x Windscreen bracket 1 x Dash mounting disc Aguri AGR700 Series What s in the box 1 x Aguri AGR700 PND portable navigation device 1 x Micro SD card for DVR player 1 x USB cable 1 x Vehicle charger 1 x Windscreen bracket 1 x Dash mounting disc Aguri AGR520 Series product overview Front Power on off 6 USB socket Power charging status LED 7 5 Touch screen LCD Headphone socket 8 Built in GPS antenna Micro SD card slot SIM card slot unused 1 2 3 4 5 Aguri AGR520 Series product overvi
22. dates select Navigation from the main menu Once the navigation software is fully open tap the LCD to enter the Navigate menu and then press the Device settings button at the top right hand corner of the screen Next tap on the Manage software button where you will see the following options Software version The software version number currently installed will be displayed here Tap to check whether a newer version of the software is available and update if required Map version The map version number currently installed will be displayed here Tap to check whether a newer version of the map is available and update if required User note Please note that the maps can be quite large and can sometimes take quite a long time to download depending on the speed of your internet connection We recommend only ever downloading maps when connected to an internet enabled Wi Fi connection It is also recommended that you ensure that your device is fully charged before you start the download or that you connect it to a 5V USB power source such as a PC or a USB Tablet or Smart Phone charger Speedshield database The version number of the Speedshield database currently installed will be displayed here Tap to check whether a newer version of the database is available and update if required Update over Wi Fi only User note We recommend that you select to Update over Wi Fi only as some of the updates are quite large The
23. ding number you can enter it now Finally press the Done button If you know the number of the property press the House No icon enter the details and press the Done button User note As an alternative if you do not know the number of a property you can navigate to a point where two roads meet using the Intersection button Then press the Done button Route settings Once you have successfully found the address you would like to navigate to there are a number of different Route settings you can use to fine tune the route your device will calculate e Press Shortest time to calculate the quickest route e Press Shortest distance to calculate the shortest route to your destination e Press Avoid motorways to create a route avoiding motorways e Press Avoid Tolls to create a route avoiding tolls Live Digital Traffic services Live Digital Traffic services provides Live traffic information in your area and on and around any routes you might like to travel If you choose to select Digital Live Traffic services when calculating a route the software will evaluate the amount of traffic on the normal route the device would calculate If the software discovers that there is a high volume of traffic on that route or that there is a specific event on that route such as an accident it will alert you and offer you an alternative route instead You will be shown both the original route and the recalcul
24. e of the screen to enter the main menu and select Address Enter the post code and the rest of the address as necessary until you see the address required appear below the data entry boxes Press the highlighted address to continue 6 Next anumber of Route settings will be displayed including Shortest distance Shortest time Avoid motorway Avoid toll and Live Digital Traffic Make your selection and press the Calculate button User note To use the Live Digital Traffic service you will need to pair your device with a suitable internet enabled Android Smart Phone More information about this feature can be find later in this user manual 7 A summary screen of your proposed journey will be displayed enabling you to check that the destination address and route calculated is correct To proceed immediately press the Aguri logo shown at the top left hand corner of the screen or alternatively allow the timer to count down to zero and navigation will start automatically 8 Next the map view will be displayed with the start of your route highlighted in blue You are now ready to start you journey Drive following the highlighted route the route description boxes displayed and the voice instructions you will hear The navigation view will constantly update your current position and road information If you accidentally take a wrong turn the unit will automatically re route as necessary to get you back on track as quickly and
25. e the journey will take and the estimated time of arrival The summary screen will be displayed for approximately 10 seconds and then your device will automatically proceed to the navigation map view so you can begin navigating If you want to manually proceed to the navigation map view before the 10 second period has elapsed press the Aguri logo button positioned to the top left hand corner of the screen agud Route description 6 Destination as he y M Pall Mall igi st lanes London Bate Mc a Corby UK f England _ _ Cambridg sgrove s mii a ated l Northamptonshire Birmingham B1 1 shire i Ji Cam UK j 1 Toweesiii Sandy Distance 118Miles h b N Arrival time 12 13 Broadway Brackley Bedfordshire Estimated Time 02 02 sho l Route option Bicester i Shortest time rshire A34 j H Use timed restriction Ox for Ss ire Hertfordshi _ Abbots Vangley Wallingford Northwood J amyayesS ats Berkshire mney A Lechlade Further options are available if you press the small menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road User note If you want to stop the automatic countdown at any ti
26. ernet via the Wi Fi connection Browsing the internet Once you have connected to a Wi Fi service with an active internet connection you can use your device to browse the internet Select Internet from the main menu and the devices internet browser will be displayed You can use this internet browser in exactly the same way you would any other internet browser you would find on a PC Tablet or Smart Phone Updating the maps and the Speedshield speed trap database To update the maps and the Speedshield speed trap database you will first need to register and create an account so that you can use the Google Play Store services Creating and setting up a Google account on the device and updating the device s mapping and speed trap database is completely free but you will need to create and add the Google account before you can access these free updates From the main menu select Settings then scroll down until you see ACCOUNTS and press the Add account button From the list displayed select Google and a new window will appear called Add a Google Account If you already have a Google Account select Existing if you do not have a Google account press New Follow the on screen instructions to create and activate your Google account on the device Once you have added a Google account to the device you will be able to update the maps and speed trap database whenever an update is available To check for up
27. ew Rear 1 Built in DVR dash cam 2 Built in speaker 3 Reset button Aguri AGR700 Series product overview Front 1 Power on off 5 Micro USB Power socket 2 Volume control 6 Built in microphone 3 Built in GPS antenna 7 Headphone socket 4 7 Touch screen LCD Aguri AGR700 Series product overview Rear 1 DVR Lens 2 Micro SD card slot 3 Built in speaker Navigation Quick Start Guide All Aguri sat navs come preloaded with your choice of UK amp Ireland or Pan European mapping plus the Speedshield speed trap database so they are ready to use straight out of the box 1 Insert the SD card provided in to the SD card slot This SD card will save all recordings from the built in DVR dash cam when in operation 2 Install the device in your car using the windscreen bracket provided Ensure that the unit has a clear view of the sky and does not interfere with the vehicle s controls Clean the area of the windscreen where you want to mount your unit and then attach the windscreen bracket making sure that it is securely attached Finally insert the device in to the windscreen bracket and adjust it so that you can easily view the display and safely reach the touch screen 3 Connect the vehicle charger and power on the device by pressing and holding the power button The device will take a few seconds to boot up but will then display a menu of the main features of the device User note If the DVR dash cam is set to
28. gurl Aguri AGR520 amp AGR700 Series User Manual www aguriworld co uk 1 Contents 3 What s in the box 4 AGR520 series product overview Front 5 AGR520 series product overview Rear 6 AGR700 series product overview Front 7 AGR700 series product overview Rear 8 Quick start amp installation guide 10 11 12 23 Detailed operating instructions Navigation map view explained Junction view explained 13 14 15 16 16 17 21 Truck and Motorhome amp Caravan screen graphics Calculating a route Summary screen explained Setting Home and Office addresses Last journey amp Clear route Multi stop route generator Using and routing by Favourites Using Recent routes 24 25 27 28 28 28 29 30 31 32 33 35 35 35 Route by Points of interest Route by nearest Point of interest Route using map Route to junction Route by co ordinate Recalculate route Recalculate route cont Environmental settings Setting up your vehicle Motorhome amp Caravan Edition Setting up your vehicle Truck Edition Tunnel category settings Truck Edition Brightness Volume Change language 36 36 36 36 36 37 37 37 37 Select map view 2D 3D or N MPH KMH select speed distance unit type Location Icon select an icon to represent your vehicle Lane view Speed trap alert settings Route alarm Alert audio E Speed User spee
29. he middle of the screen to access the Navigate menu and then press the Device settings button Next scroll until you see the Language button and press it once You have a choice of using either TTS Text to speech or Voice TTS uses a computer generated voice but will provide more in depth descriptions of the next action you will need to take For example instead of saying Turn right it will say Turn right on to the A555 Standard Voice uses voice commands recorded by a real human so sound more natural but do not provide the same level of detail User note The voice alerts are set to TTS as standard w U Settings Press the middle of the screen to access the menu and press the Device settings button at the top of the screen Scroll until you see the Settings button and press it once to enter the general Settings menu 2D 3D or North Select map view This option allows you to choose the map view you prefer to have displayed on the screen The 3D view is the default factory setting Make your selection and press the Return button to save and exit MPH KMH select speed distance unit type This option allows you to choose which measurement you want the screen to display Make your selection and press the Return button to save and exit Icon Select which icon you would like to represent your vehicle on the map This option allows you to choose the icon which represents your vehic
30. ice is connected to the internet by wi fi Select Update over wi fi only to ensure your device only updates maps when connected to wi fi More information on how to connect your device to wi fi can be found later in this manual Mini short cut menu The Mini short cut menu can be launched by touching the screen anywhere near the top of the display The Mini short cut menu will open automatically and will be visible for four seconds if no other button is pressed 5 4 2 1 3 3 6 1 Scroll map Press the Scroll map icon and you can scroll across the map view on the display by swiping the screen with your finger You can also zoom in and out of the map using a pinch or stretch motion with your fingers 2 2D 3D N Switch between 2D 3D or N North on screen map views 3 Increase or reduce map view magnification The map on the screen can be magnified or reduced by pressing the or buttons 4 Report and share mobile speed location Press this button to report and share the location of a mobile speed trap with other users Please note this function will only work if you pair your device with an internet enabled Android Smart phone See more detailed instructions about how to pair your Android Smarty Phone later in this manual 5 Find nearest petrol station 6 Find nearest parking facility 40 DVR Dash Cam The AGR700 and AGR520 incorporate a built in DVR dash cam that will automatically record the view in
31. le as it appears on the screen You can choose between the default vehicle icon a car a truck or a motorhome Make your selection and press the Return button to save and exit Lane view Lane view will show which lane or lanes you should use at a junction motorway intersection or exit This option will only work when a route has been calculated Make your selection and press the Return button to save and exit Speed trap alerts Your sat nav is already preloaded with the Speedshield speed trap database but you can still choose whether you want it to alert to speed traps mobile speed trap locations red light cameras or alert to nothing at all You can also separately select whether to receive audible and visual alerts or visual alerts only Make your selection and press the Return button to save and exit Route alarm If you deviate from a calculated route the unit will automatically recalculate a route To indicate that re routing is in progress the unit will emit an audible tone This option allows you to choose if you want a beep tone to be emitted during recalculation Make your selection and press the Return button to save and exit Alert Audio There are two different audio tones to choose from Choose between Tone 1 and Tone 2 Make your selection and press the Return button to save and exit E Speed E Speed contains speed limit information on nearly every road in Europe which can be displayed on your unit
32. lection of Apps to the device To add a new App select Apps from the main menu and select the Google Play icon User note Your device has a limited amount of memory available for storing and operating additional Apps The number of A pps you will be able to download and operate on the device will be limited to the unit s available memory at any given time If you would like to check the current available storage on your device select Settings from the main menu and then scroll down and press the Storage button for more details Digital Live Traffic services amp Mobile speed trap reporting Pairing your device with an Android Smart Phone Your device has the capability to receive Digital Live Traffic services and also for you to share and receive the locations of mobile speed traps with other users These two features operate completely independently of each other but both require that you pair a suitable Android Smart Phone to your device so that it can leverage your phone s mobile internet connection User note When the device is paired with your Android Smart Phone it will leverage your phone s mobile 3G or 4G internet connection The device will use your phone s internet connection to send and receive data such as traffic flow information and if you use the mobile speed trap sharing system will send the coordinates of any locations reported by you as well as download the l
33. me Decrease volume Additional screen graphics explained Additional screen graphics and instructions will appear from time to time during your journey Junction view Visually indicates exactly what action to take Particularly useful at complex motorway junctions Please note that Junction View graphics are only available for motorways London 12 OAQDOAA No trucks allowed Risk of grounding Height restriction Width restriction Road narrows Side winds No vehicles with goods No vehicles carrying Axle weight restriction No vehicles or combinations Width restriction Harmful to water explosives of vehicles over maximum length shown AAAA Double bend Steep hill upwards Steep hill downwards Sharp bend right Sharp bend left Weight restriction Calculating a route There are several ways to calculate a route Calculate a route using an address or postcode Press the middle of the screen to access the Navigate menu and then press the Address icon Tap on the box marked Country and either type in the country you require or select the country from the list displayed and press Next If you have the postcode tap on the box marked Postcode enter the full postcode and press Next The address you are looking for or a list of addresses within that postcode will now be displayed You can now either select the address directly from the list or if you want to navigate directly to the house or buil
34. me simply tap anywhere on the screen To continue with your route at any time press the Aguri logo button positioned to the top left hand corner of the screen Setting Home destination Press the middle of the screen to access the Navigate menu and press the Home icon The first time the Home function is used the screen will display Set home then Cancel and OK Press OK to proceed You can set Home using one of the following options Find address Find by POI Find using Recent routes and Save using current location To calculate a route to Home press the middle of the screen to access the Navigate menu and then press the Home icon The unit will display details of the destination and the various Route settings available Press the small map icon found at the top right hand corner of the screen to view the location on the map Press the small menu icon to change or delete the location saved as Home You can also use the small menu to change the start location or add a Via point to your journey Finally press the Calculate button to move to the Summary screen and to begin your journey Setting Office destination Press the middle of the screen to access the Navigate menu and press the Office icon The first time the Office function is used the screen will display Set office then Cancel
35. ng the keyboard As you type in the city name the unit will prompt you with a list of possible matches If you see a match in the lower window press this with your finger Next press Category and enter the category type you require using the keyboard If you do not know the category type you can scroll up and down through the options by swiping the screen with your finger Once you find the correct category type press it once to select it Now press Name If the name of your POI is displayed in the lower window press it once to select it As an alternative you can start to type the name to narrow down the options and then select it Information about your chosen destination will then be displayed and you can set the Route settings you prefer for this journey e To start your journey press Calculate e To view the destination point of this route on the map press the Map icon displayed at the top right hand corner of the screen e To return to the previous screen press the Return button e To change the start location or add a Via point press the small drop down menu displayed at the top right hand corner of the screen N D Once the calculation is complete the summary screen will be displayed confirming the address you wish to navigate to your start point your distance to the destination your estimated arrival time your estimated journey time and any Route settings you may have selected
36. o proceed immediately If you want to spend more time viewing the Summary screen tap anywhere on the screen to stop the automatic countdown Further options are available if you press the small drop down menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road Once you are ready to proceed press the Aguri icon to start navigating ll Route to junction This function allows you to navigate to a specific junction To navigate using this function press the middle of the screen to access the Navigate menu and scroll until you see the Route to junction icon Enter the Road number followed by the junction number and a map view of the junction will be displayed Tap the screen to pinpoint exactly where you want to navigate to and select Continue from the Quick menu to proceed Route by coordinate To navigate to a destination using a coordinate press the middle of the screen to access the Navigate menu Scroll until you see the Route by coordinate icon and press it once Enter the coordinate using the key pad and then press OK There are three different formats you can use when entering the coordinate Degrees Minutes and
37. o visit a number of different locations in one day it is possible to enter up to sixteen locations and the navigation software will create the optimum route around all of them It is possible to create and save up to eight Multi stop routes in total Create a Multi stop route Press the middle of the screen to access the Navigate menu Then press the Multi stop icon At this point the unit allows you to create a new Multi stop route use or amend a saved Multi stop route or delete a Multi stop route Press the to start creating a Multi stop route You will first be prompted to add a Name for your Multi stop route Enter the name and press Done to continue The device will automatically use your current location or the last location the device was used at to create the start point of your Multi stop route To change this address or location press the Change button You can find the address you require using one of the following options e Find address e Find by favourites e Find by POI e Find using recent routes e Current location Once you are happy with the start position you can then enter the details of your first destination Press Add and search for the address using one of the following options e Find address e Find by favourites e Find by POI e Find using recent routes e Current location When you are ready to add another addres
38. ocations of any mobile speed trap sites reported by other users in your area Depending on the mobile data package included with your Smart Phone contract using these features could cost you money We strongly advise that you check what mobile data package is included on your phone contract and regularly monitor the amount of mobile data used by our device whilst paired with your Smart Phone to ensure that you are aware of any associated costs you may incur To pair your Smart Phone with our device you must first download and install the Aguri Live App from the Google Play Store Using your Smart Phone open the Google Play Store App and search for Aguri Live Once you have found the App download and install it on your Smart Phone Once installed check that you have Bluetooth activated on your phone and that your phone is visible to other devices and then open the Aguri Live App and switch it to On Next power on your AGR520 or AGR700 and select Settings from the main menu Switch Bluetooth on by tapping the Bluetooth on off button on the right hand side of the screen When switched on the button will turn blue Tap on the word Bluetooth to enter the devices Bluetooth setting At the top of the screen you will see ANDROID BT Not visible to other Bluetooth devices Press this once to change it to Visible to all nearby Bluetooth devices plus a timer counting down from 2 00 minutes Now
39. on allows you to check the strength of the unit s GPS connection at any time Press the middle of the screen to access the Navigate menu Press Device settings and then scroll until you see the GPS status icon and press it once Your current GPS status will be displayed Live Digital Traffic Get an overview of the traffic situation in your area or in area where you want to travel User note If you want to use Digital Live Traffic you will need to pair your navigation device with an internet enabled Android Smart Phone Please note that you may be charged for the mobile data the navigation device uses depending on the mobile data package you have as part of your Smart Phone contract Version Check here for information about your device such as the software and hardware version numbers Press the middle of the screen to access the menu and press the Device settings button Scroll until you see the Version button and press it once The following device information will be displayed e Software version Software version number e Manage and update maps Press to check which maps are already installed on your device to download new ones and update existing ones e Speedshield database Date the Speedshield speedtrap database was last downloaded Update over wi fi only Downloading and updating maps can take a reasonably long time and use a lot of data We recommend that you only perform updates when your dev
40. operation of your unit To enter Device settings press anywhere on the screen to enter the menu and then press the Device settings button found at the top right hand corner of the screen Setting up vehicle parameters for car truck motorhome and caravan Car Environmental settings By entering the Environmental settings of your vehicle your navigation system will be able to calculate routes avoiding any areas such as Low Emission zones where you may not be able to travel depending on the vehicle you are driving To enter the Environmental settings of your vehicle in Car mode press the middle of the screen to access the Navigate menu and press the Device settings button at the top of the screen to access the Device settings menu Next press the Car icon in and enter the details requested If you are unsure what the settings for your vehicle are please consult the vehicle manufacturer s handbook or contact your local dealer About Environmental settings or Low Emission Zones LEZ s Low emission Zones LEZ s are areas or roads where the most polluting vehicles are restricted from entering This means that vehicles are banned or in some cases charged if they enter the LEZ when their emissions are over a set level Vehicle emissions are classified by Euro Standards 1 6 for the vehicles that they affect In many cases another factor is whether or not the vehicle has a particulate filter or cat
41. ourney you want to cancel a current stage and go to the next stage then press the mini summary box and the message Delete current leg will appear Press OK and the unit will calculate the route to the next stage in the Multi stop from your current position If the unit is turned off and then on again during a Multi stop journey it will retain the current route and ask you if you want to continue with the current destination or with the next leg of the Multi stop route or if you want to cancel the Multi stop route completely 19 Sort a Multi stop route Once you have created a Multi stop route you can arrange the destinations into the most optimum order by using the Sort function a Pall Mall sa St James s London 2 UK A34 p Botley Oxford UK Montpellier Drive fa Cheltenham UK High Street fs Bath BA1 4 UK 3 4 1 5 6 Add an additional destination to your Multi stop route Change start address Save the Multi stop route generated Sort Multi stop into the most efficient logical order OK Proceed button Return to previous screen ow Se EP Once the route has been arranged press Save then OK The unit will then calculate the Multi stop route and display estimated times and distances to each address or location Press the Aguri logo at the top left hand corner of the screen to proceed with your journey N Adding and saving a Favourite location The unit can store up to 150 location
42. ous page press the Return button e To change the start location or add a Via point press the small drop down menu displayed at the top right hand corner of the screen Once the calculation is complete the summary screen will be displayed confirming the address you wish to navigate to your start point your distance to the destination your estimated arrival time your estimated journey time and any Route settings you may have selected Navigation will begin automatically within 10 seconds if you do not touch the screen or you can press the Aguri logo to proceed immediately If you want to spend more time viewing the Summary screen tap anywhere on the screen to stop the automatic countdown Further options are available if you press the small drop down menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road Once you are ready to proceed press the Aguri icon to start navigating N Recent routes The unit can store details of the last 40 routes that have been calculated so that if you want to return to an address or location you do not have to enter all the details again To calculate a route using this feature press the middle of the
43. out recycling please contact your local civic office or recycling centre Warranty Please note that to receive technical support or service under warranty you must first register your unit at www aguriworld co uk Having a problem with your Aguri satellite navigation system Try visiting the FAQ section at www aguriworld co uk We find that most issues can be resolved there If you are still experiencing problems your Aguri satellite navigation system comes with a standard 12 month warranty To return your unit under warranty please ship it in suitable protective packaging using Special Delivery or an alternative insured delivery service to Warranty Department Aguri Limited Ollershaw Lane Marston Northwich Cheshire CW9 6ER Please enclose the following information a Your name address and a full description of the problem b A telephone number where you can be reached during business hours c Your units serial number d A copy of your proof of purchase Please note that the warranty will be considered void if the product Has been dropped or otherwise obviously mistreated Has been subjected to heat moisture or damp conditions Has been opened or dismantled Has been charged or powered with any cable or charger other than the one supplied agurl www aguriworld co uk
44. press the Scan button in the Aguri Live App on your Smart Phone Your Smart Phone should quickly display the name of the device under the header scanned devices Return to the device ensuring that it is still showing Visible to all nearby Bluetooth devices and press the SEARCH FOR DEVICES button found on at the top left hand corner of the screen The device should now find your Smart Phone and display the name of it below AVAILABLE DEVICES On the device press on the name of your phone to select it and a window should pop up simultaneously on the device and your Smart Phone asking you to confirm that the pass key on both devices is the same Press Pair on both devices to confirm the connection Your Android Smart phone navigation device should now be successfully paired Using Live Digital Traffic services Live Digital Traffic services provides Live traffic information in your area and on and around any routes you might like to travel Each time you ask the device to calculate a route you will be given the option of using Live Digital Traffic If you choose to select Live Digital Traffic the software will evaluate the amount of traffic on the normal route the device would calculate If the software discovers that there is a high volume of traffic on that route or that there is a specific event on that route such as an accident it will alert you and offer you an alternative route instead You will be sho
45. ravan is used Weight per axle Enter the vehicle weight per axle here Vehicle type This can be either fixed axle or trailer Fixed Axle Standard setting for fixed axle vehicles Trailer There are specific traffic regulations for a vehicle towing a caravan There are some roads where it is not allowed to tow a vehicle and these roads will be avoided if you select this setting 31 Truck To enable the unit to calculate a suitable route you need to input certain attributes such as the height width and weight of your vehicle You can create and save the settings for up to 10 different vehicles Press the middle of the screen to access the menu and press the Device settings button at the top of the screen followed by the Truck icon Basic settings Name Enter the vehicle name here Height Enter the vehicle height here Length Enter the vehicle length here Width Enter the vehicle width here Weight Enter the vehicle weight here Weight per axle Enter the vehicle weight per axle here Enter truck type Truck The standard setting for a fixed axle truck Trailer There are specific traffic regulations for trucks with trailers There are some roads where trucks with trailers are not allowed and these roads will be avoided if select this setting You can choose between the following options Truck with no trailer Truck with 1 trailer Truck with 2 trailers Truck with 3 or more trailers or semi or tractor with 1
46. s To add a Favourite press the button displayed at the top right hand corner of the screen The device will show you the following methods to find the address e Find address e Find by POI e Find using recent routes e Save using current location Select the most appropriate method and follow the on screen instructions to find and save the address or location you want to store in your Favourites folder Editing or deleting a Favourite If you would like to edit or delete a Favourite location press and hold the address until a pop up window is displayed The pop up window will enable you to rename the Favourite move the Favourite up or down the list and to delete that particular location from your Favourites folder If you would like to delete all of the Favourites in your list press the small drop down menu button at the top right hand corner of the screen and select Delete all Route by Favourites To navigate to one of your stored locations press the middle of the screen to access the Navigate menu and then press the Route by Favourites icon Select the Favourite you want to navigate to from the list by pressing it once Information about your chosen destination will then be displayed and you can set the Route settings you prefer for this journey e To start your journey press Calculate e To view the destination point of this route on the map press the Map icon e To return to the previ
47. s press the Add button again to enter additional destinations Once you have added all the addresses or locations you require you have two options Press Save to save them in the order you have entered them or press the Sort button and your device will sort them in to the most appropriate order to route around them 17 Editing a Multi stop route It is possible to change the route order delete any stage of a route and change the route settings Press the middle of the screen to access the Navigate menu Then press the Multi stop icon and then press the name of the Multi stop route you want to edit Press and hold one of the stages listed for 2 seconds and then release your finger The following options will appear on the screen 5 ear 2 T 6 ae Pall Mall FF ct James s London UK A34 fa Botley Oxford UK 3 Montpellier Drive Cheltenham UK High Street Bath BA1 4 2 UK Delete the selected destination Change the final destination You can choose between final destination and stops Move the selected destination up Move the selected destination down Done button Use the small drop down menu to change the route settings for that section of your journey OVP wens S Once you have made your changes press Done to save Using a Multi stop route To use a saved Multi stop route press the middle of the screen to access the Navigate menu Press the Multi stop icon and then pres
48. s the name of the Multi stop you want to use The device will display the addresses and locations saved in the Multi stop and options are displayed enabling you to Add additional locations and Sort the order of those locations if necessary Once you are happy with the contents and order of your route press OK The unit will then calculate the route to each destination and display a new summary screen with the distance to each destination along with the estimated duration of the journey to each destination stage If you want to view the calculated route at this stage press Map If you wish to use the Multi stop route created press the Aguri logo at the top left hand corner of the screen to continue User note If you press one of the stages listed before pressing Go the device will display various options as listed below Delete the selected destination Change the final destination or choose between final destination and stops Move the selected destination up Move the selected destination down Use the drop down menu to change the route settings for that section of your journey DUE adi ae Once you have selected to continue with the routes calculated the unit will return to the Map Navigation View showing your current position along with a mini summary screen m _ 1st Exit A312 H ARROW Where Pop up window confirms current leg and distance left to go on that leg If during your j
49. screen to access the Navigate menu and scroll until you see the Recent routes icon and press it once A list of your Recent routes will be displayed in chronological order Use your finger to swipe the screen up or down to scroll through them Next select the destination you want to navigate to from the list and press it once Information about your chosen destination will then be displayed and you can set the Route settings you prefer for this journey e To start your journey press Calculate e To view the destination point of this route on the map press the Map icon displayed at the top right hand corner of the screen e To return to the previous screen press the Return button e To change the start location or add a Via point press the small drop down menu displayed at the top right hand corner of the screen Once the calculation is complete the summary screen will be displayed confirming the address you wish to navigate to your start point your distance to the destination your estimated arrival time your estimated journey time and any Route settings you may have selected Navigation will begin automatically within 10 seconds if you do not touch the screen or you can press the Aguri logo to proceed immediately If you want to spend more time viewing the Summary screen tap anywhere on the screen to stop the automatic countdown Further options are available if you press the
50. seconds DDO MM SS s Degrees Minutes DDO MM mmm_ Decimal Degrees DD dddddo User note When entering the Longitude you must ignore the minus symbol The degree symbol must be used for this function to work After pressing OK the location of the coordinates will be shown on the map If they are correct press the tick button and then follow the on screen instructions to calculate a route Recalculate route You have the option to recalculate your route if you want to avoid certain roads However this facility is only available once you have calculated a route If the Recalculate route icon is greyed out this means a route has not been entered and the option will not be available To recalculate a route press the middle of the screen to access the Navigate menu and press the Recalculate route icon You can then choose how you want to recalculate your route from the options displayed Avoid road If you know the road number or name you want to avoid then select this option Press Avoid road and the unit will show you details of your route and a list of the road names and numbers to be used Use the up and down arrows at the right hand side of the screen to see more details Next select the road you want to avoid by pressing it once and the route will be recalculated and displayed on the screen The original route is shown in blue and the new route in yellow Select your preferred route by pres
51. sing the appropriate coloured button at the bottom of the screen Once you select a route the unit will automatically switch to the Navigation Map View screen and start to navigate Note that the summary screen and route options will not be displayed at this time Avoid by distance This function allows you to avoid several roads from the calculated route so that you can re calculate the route over a defined distance ranging from 1 mile to a maximum of 100 miles To use this function press the Avoid by distance button and the screen will show a distance slider Use your finger to adjust the slider to the required distance and press the Calculate button The route will be recalculated and displayed on the screen The original route is shown in blue and the new route in yellow Select your preferred route by pressing the appropriate coloured button at the bottom of the screen Once you select a route the unit will automatically switch to the Navigation Map View screen and start to navigate Note that the summary screen and route options will not be displayed at this time Clear Avoid Road Alternative name Clear recalculated route If you do not want to use the alternative route and you want to return to the original calculated route then press the Clear recalculated route button and the original route plotted by the unit will be restored Device settings The Device settings menu allows you to customise the
52. small drop down menu icon found at the top right hand corner of the display e Press Simulation to show a simulation of the route that has been calculated e Press Guide to see a description of the calculated route turn by turn road by road e Press Avoid road if you would like to re calculate the route avoiding a specific road e Once you are ready to proceed press the Aguri icon to start navigating Deleting a Recent route If you would like to delete a Recent route press and hold the address you would like to remove from the list until a pop up window appears The window will display the address you are about to delete with the options Cancel and OK Press OK to delete the destination or Cancel to return to the list of Recent routes If you would like to delete all of the routes in the Recent routes folder press the small drop down menu displayed at the top right hand corner and select Delete all Route by POI Points of interest You can calculate a route to destinations such as a hotel or restaurant using the database of points of interest which come pre loaded on the unit To navigate using this function press the middle of the screen to access the Navigate menu Next swipe the screen with your finger until you see the Route by POI icon and press it once Press Country to select the required country then press City and enter the name of the city usi
53. wn both the original route and the recalculated route including the distance and estimated travel time for each so you can determine which route to take Using the Mobile speed trap sharing feature Once paired with a suitable Smart Phone your device will enable you to report and share the locations of mobile speed traps with other users To report a mobile speed trap tap the top section of the screen to launch the mini drop down menu and press the Report mobile speed trap icon Your device will automatically share the location reported with other users Your device will also automatically receive any locations reported in the area you are driving by other users If you drive past one of these locations the device will automatically display the audible and visual Mobile speed trap alert as normal Report mobile speed trap button 48 Disposal of Old Electrical amp Electronic Equipment applicable in the European Union If you see this symbol on a product or its packaging it indicates that the product should not be treated as normal household waste If you see this symbol on any product or packaging it should be handed over to an applicable collection point for the recycling of electrical equipment By ensuring that this product is disposed of correctly you will help prevent a potentially negative impact on the environment In addition the recycling of materials will help to conserve natural resources For further information ab
Download Pdf Manuals
Related Search