Receiver/Digital Decoder DVB
Contents
1. Default Sort channel factory default FIA CAS Sort channel by free and scrambled sequence Free channels will be listed first and scrambled channels behind in the channel list Menu Operations N me 7 A FTA All Satellites Lock 3950 H 27498 V A PCR 602 603 602 Lock Unlocked channels are listed first end locked channels at the end Name 2 Sorting in Alphabetical order ignoring symbol Name 2 Sorting in Alphabetical order ignoring symbol 3 1 4 Edit After pressing the Yellow button a window for entering the password will open The default password is 0000 You can delete skip lock and edit the channel Press MENU to leave the channel editing The system will ask you to confirm the saving of the changes you made 3 1 4 1 Delete 1 astra 3950 H 27498 V AJPCR 602 603 602 In channel edit menu press Red button will open another window where you can choose between delete one channel and delete all channel Del One Press Red button to mark a channel for deleting Marked channel will be deleted after you confirm to save the changes when you leave this menu Del All a Press Green button to show a deleting icon behind all channel name b Press MENU button you will be asked Are you sure to save Select to delete all channel Select Cancel to cancel the operation 15 Menu Operations 3 1 4 2 Skip In channel edit2. in the window and press OK on he RCU 0080000000 the e 3 Press Exit button to close the find window and brings you back to the 4 ius Record list TTD T 39 Menu Operations Lock In channel Record menu press Green button to place a lock icon behind the name of the highlighted Record Marked Records will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this eame menu Disk 2 515 Copy In channel Record menu press Yellow button copy the recorded programme to another disk Press 4 to switch select copy path Select OK to add all image Select Cancel to cancel the operation Lasagne Disk 81 e RL mum tnter Exit CXESSIOUD Delete In channel Record menu press Red button will open another window where you can choose between add one image and add all image Del One bases Press Red button to mark a image gessi for add Marked image will be add after you confirm to save the changes when you leave this menu Del All c Press Green button to show a add icon behind all image name d Press MENU button you will be asked Are you sure to save Select OK to add all image Select Cancel to cancel the operation 40 7 2 1 Menu Operations Media Control Reserved TMS Size Press Vol lt
3. 3 1 1 Favorite 1 Press FAV to open the favorite window 2 You can select between 32 favorite groups with CHA W Press OK to os assign the channel to a favorite group press EXIT to exit favorite group MEE ius 3 Press OK again to remove the n VIP jay channel from the marked favorite NET c mu group 4 Press MENU button you will be asked Are you sure to save Select Yes to save the marked favorite group Select No to cancel the operation 5 To return to the TV channel list The channels of favorite groups are indicated with a favorite icon behind the name 3 1 2 Move Pressing the Red button in the TV channel list will open another window where you can choose between move the actual channel and swap the actual channel to the desired position press OK to confirm it a 1 b Move int Press Red button to show a moving D icon behind the channel name Lr Move the channel to the desired position with CH A V Press OK to confirm the position Swap Press Green button to show a moving icon behind the channel name Move the channel to the desired position with CH A F Press OK then the selected channel will exchange the positions with the channel name on this position immediately 14 3 1 3 Sort Press Green to open the sort window Press CHA W to select and OK to confirm your choice The ways of sorting are
4. Basic Operations 6 2d OWENOM ST B itecto Denia ont Moe eae aucta eor 6 22 Stando Moo ET EE 6 2 9 rs easier 7 24 CNANPEENUMDbe rails 7 25 Op ee 7 2 5 PAUSE dido uet as done e m I Uu Usque ao 7 2 MENU licia i 7 DO Eizo arr oi 7 20 CHAT iene 7 ZIO earn 8 ANI ROIO IEEE IENE 8 2712 alii ia i i i ie ii 8 243 Iv Podio ahi ii i 8 2M Mac UC CEDE 9 2 19 ARR RAR Sas lek foot Auk Saat 9 2 0 lU m P 10 2 io e C ee 10 219 INEO sus tec iue ee arie 10 ZIO aaa ai peo ire idolo ii ii 11 EEA EA 11 221 Filiale o 11 222 bn M tre 12 2 29 7 bb ora itc adn EM 12 2 24 AGO TO EMITE ei 12 MEE Rec 13 dall IV Channel DISE tes om va siete cout obse dose tie dade duc a a dedu 13 A 14 tna 14 OV gt EDU 15 CAR cro e REC RE 15 OMNE ZI c M 9 17 2 2 Rado Channel bist cess 17 33 CHannel Seiips em 18 3 4 FAVORS group IStNaAME Aissis e link eet o Lina ani J
5. close the EPG menu press Exit Menu 4 Press the Red button in the EPG menu to program a timer with the actual events data 5 Press the Green Yellow to select date 2 15 Audio 1 In TV mode press the Audio button to open the Audio Mode window 2 Select the item you want to adjust with CHA W and change the value with VOL lt gt Basic Operations 15 30 19 30 Hits Home Theme Show Game Rating 0 16 30 23 03 2004 15 30 19 30 Hits Home The Music Factory delivers your favourite hits direct to your door Featuring the likes of Black Eyed Peas Britney Spears George Michael Jamelia Jennifer Lopez Outkast and many Current Date Time 23 03 2004 eet cune Got Basic Operations 2 16 SUB In Subtitle Display menu Subtitle Press 4 to select standard or Off Press 4 to select languages If the current channel has subtitle information it will be displayed if this function is On If this function is Off subtitles won t be displayed 2 17 ZOOM 1 The Zoom key allows you to magnify a certain area on the images and the current screen will show 2 Press Zoom key again the image will enlarge rotate as x1 x2 x4 x6 x8 x12 x16 In x2 x16 image using CHA Y VOL 4 keys to move the image center area you want to see 4 n zoom mode press Exit to close Zoom window 2 18 INFO
6. This mode allows saving current consumption when the receiver is stand by Low power consumption mode only can be enabled when the VCR Loopthrought option see point 5 2 is STB master selected By the other way if you choose VCR master then the Low Power Consumption option will not be active and the receiver will not be in LPC mode Press Exit button to leave this menu Press Exit button to leave this menu 29 6 Tools When you enter to Tools menu you will see a screen like beside In Tools menu 1 Press CHA V to select the wanted item among Information Quick Setup Factory Default Software Upgrade and CAS Press OK to enter the selected item Information When you select the Information menu you will see a screen like beside The screen displays data about the current channel Press Exit button to leave the information display 6 2 Quick Setup When the STB is used which need to repeat set menu Language First Audio Second Audio LNB Power LNB2 Power Single Search Multi Satellite Search and Main Menu 30 Menu Operations 6 3 Factory Default When you press OK on the Factory Default item 1 A dialogue box will occur where you need to enter the password 2 After you input the correct password a warning message will be displayed like the one beside 3 f you select Yes then all changes you made will be reset to default values Make sure you
7. Green button to sort the channels by free and scrambled channels Free channel are listed first and scrambled channels last Press Yellow button to open the SAT list After selecting a satellite the channel list will be reduced to the channels of this satellite Press FAV button to open FAV list n After selecting a Favorite Group the onec l channel list will be reduced to the channels of this group Press Blue button to open the Find window You can use this feature to find channel by their names Press OK to change and display the marked channel 2 12 RECALL Pressing the Recall button allows you to toggle between the actual and the last selected channel 2 13 TV Radio In TV mode press TV Radio to switch to Radio mode In Radio mode press TV Radio again to switch back to TV mode 2 14 EPG The STB supports Electronic Program Guides EPG to give you information about the actual programs of certain channels like event name subtitle description start and finish time This feature is depending on the service of the channel provider Press EPG to open the EPG window 1 You can move the highlighted channel with CH amp and preview the highlighted program in the preview window with 4 and display the event s detailed description 2 Press the INFO button in the EPG menu to display the detailed information of the actual event in the selected channel 3
8. Marked image will be add after you confirm to save the changes when you leave this menu Del All a Press Green button to show a add icon behind all image name b Press MENU button you will be asked Are you sure to save Select OK to add all image Select Cancel to cancel the operation Find Basically the operation of Music List gt Find is same as all gt Find 38 Menu Operations 7 1 6 Picture List Basically the operation of Picture List is same as Music List except that in the Yellow Setup buttons offer further functions to manage Press Yellow button to open the Setup window Select the item you want to adjust with CHA W and change the value with VOL lt gt Size Full and Real Time 0 Sec 1 Sec 2 Sec 3 Sec 4 Sec 5 Sec 6 Sec 7 Sec 8 Sec and 9 Sec Repeat On and Off Effect Normal Shutters Brush Slide Random and Fade Mp3 On and Off 7 1 7 Video list Basically the operation of Video List is same as Music List 7 1 8 Record list If you enter the Record list menu a window like the one below will open The color buttons offer further functions to manage the channel list p 1 Press Red button to open the Rename window like showed beside Press CHA V Vol 4 9 to select the leading character of the channel name and press OK to confirm it 2 After entering the character s highlight AI HN OK
9. for channel change and Wakeup channel date then you have further options you need to set gt Wakeup Channel Press OK to enter the channel list and select the channel you want to see with CHA Y press OK to confirm it gt Wakeup Date Use number buttons to input your wakeup date lime Use number buttons to input your wakeup time If date and time are reached then no matter if the system is in standby mode or in playing mode it will automatically switch to the channel you set and start to play Record TV 24 Menu Operations Duration Here you can set the time you want to see or play this channel When the time is reached whenever the system is in standby mode or playing a channel the system will automatically switch to the channel you select and play the channel within the duration time you set The minimum duration unit is one minute After the duration time the system will automatically switch to otandby mode When you select Message reminding message option in Timer Service then you can enter additional data gt gt gt Wakeup Message Press Vol 4 5 to select the category of the wakeup message from Birthday Anniversary and General Wakeup Date Use the Number buttons to input your wakeup date On Time Use the Number buttons to input your wakeup time date and time are reached no matter if the system is in standby mode or in playing mode it will a
10. marked TP Index item press OK to display TP list use CHA V to select for which you want to create a new channel Press OK to display the TP number where the channel can Menu Operations be found The next three items will show the related parameters Highlight the Name item and press OK to display the button pad and edit the new channel s name In Video PID Audio PID and PCR PID items you can enter the numbers directly to set these parameters of the new channel After modification select Save and press OK to save the new channel and leave the edit mode Select Exit and press OK to exit the edit mode without saving the new channel 3 1 5 Find 1 Press Blue button to open the Find window like showed beside Press CHA W Vol lt b to select the leading character of the channel name and press OK to confirm it After entering the character s highlight OK in the window and press OK on the RCU Press Exit button to close the find window and brings you back to the channel list 3 2 Radio Channel List Basically the operation of Radio Channel List is same as TV Channel List except that in the small channel window the radio Logo will be displayed 17 c o e r o 5 Iw wIx v z i 2 gogoo LL DEL ox Lnd Cal ramen n m A T Menu Operations 3 3 Channel Setup When you enter
11. sega docs ear odore alia ia laine anta ai ELE D tai 39 7 2 Nedia CGentolia sasa 41 iDIsKInformation a asce lalla 41 8 2 2 2 42 Remote Control amp Panel Description 1 Remote Control amp Panel Description 1 1 Front Panel Description 1 POWER Is used to switch between the working mode and the standby mode 2 Display 4 Digit 7 Segment Displays received channel number while operating and time in standby mode when LPC function disabled and no LED display when LPC function enabled Remote Control amp Panel Description 1 2 Rear Panel Description e HiFi a SAT analog HH S 1 1 1 WARNING TO REDU ct MAK oF AF A FIRE OR ELECTRIC TERRESTRIAL IN A fi SROCK DO THS APPLIANCE TO 5V D E 75mA Mix wa I Ta ib dii UA KZ HDMI VIDEO AUDIO R S PDIF a DC 2 LOOP OUT Terr output for cascading to others devices VIDEO CVBS video output for TV AV in AUDIO HiFi output for stereo set COAXIAL S PDIF Coaxialoutputfordigitalaudio AC3 USB To connect with USB disk HDMI HDMI output for the connection to a TV set E AC IN Mains input cable Remote Control amp Panel Description 1 3 Remote Control Description 2 2 1 Basic Operations Basic Operations Switch o
12. select the Ch No Therange is from 5 to 69 Sgal intensity TT 908 2 Tuner Power On Off A 21 Menu Operations 5 System Setup When you open the System Setup menu a window like the one beside will be opened In System Setup menu 1 5 1 After selecting the Language menu you Will see a window like beside 1 Press CHA V to select menu items among Language TV System Time amp Timer setting OSD Setting Parental Lock and Power setting Press OK to open the selected item Language Menu Language Press Vol lt gt to select languages The selection of language include English German French Spanish Italian Portuguese Turkish Polish Russian Danish Greek Hungarian Arabic Farsi and Dutch First Audio Some channels offer more than one audio language This function allows you to set the preferred audio language for those channels If a channel offers the same audio language as the First Audio you set the system will play this audio language as default If the channel does not offer this audio language then the system will compare the offered languages with the second audio language The selections of audio language include English German French Spanish Italian Portuguese Turkish Polish Russian Danish Greek Hungarian Arabic Farsi and Dutch Second Audio If the channel has no audio language that corresponds with First Audio but
13. showed Note Card must be inserted with chip in Ule Wl upper side 33 Menu Operations 7 Media Management When you enter to Media Management menu you will see a screen like beside In Media Management menu 1 Press CH A V to select the Media List Media Control and Disk Information 2 Press OK to enter the selected item 7 1 Media List Press CH A V to select the wanted item partition Press Red button to open the Rename window like showed beside Press CHA V Vol 4 to select the leading character of the channel name and press OK to confirm it If you enter the Media List menu a window like the one below will open 1 Press 4 select the all mp3 image video music list picture list video list Record list 2 You can move the highlighted Record with CHA W to preview the highlighted program in the preview latin Loup e LU window 3 Press PGUP PGDN on the RCU to jump between the channels by pages Press Menu or Exit buttons to enter TV playing mode 5 The color buttons offer further functions to manage 34 7 1 1 Menu Operations All Edit Press Red button to open the Edit window like showed beside The color buttons offer further functions to manage lor oe 2 In all edit menu press Green button will open another window where you can choose between delete one and delete a
14. the Channel Setup menu you will see a screen like beside 1 Startup Channel Press OK to enter Startup Channel menu to see the screen like showed beside f you set of Boot on Channel to On you can edit the following two items If the setting is Off the box always starts with the channel that was running when the box has been switched off the Mode item you can select either TV channel or Radio channel Startup Channel item you can open the channel list by pressing OK Then you can select the channel of you choice Press OK again to confirm Channel Play type Use CHA V to select press OK to enter Channel Play Type menu Here you can select the playing channels as AI Free or Scrambled with Vol lt gt If you select Free then all scrambled channels will be skipped when you change channels with Vol lt gt Press Exit to leave the Channel Setup menu 18 Menu Operations 3 4 Favorite group list name When you enter Favorite group list name menu with 32 favorite group will be displayed press OK on the RCU to rename favorite group Use CHA V Vol 4 gt to select character press OK to confirm it After modification select OK of button bar and press OK on the RCU to rename the favorite group name and leave the edit mode Press Exit on the RCU to exit the edit mode without saving the fav
15. window like showed beside Press CHA V 4 to select the leading character of the folder BEDBGUBOO 7 aogoagaonoo irm i DBOGGODGOE name and press OK to confirm it 7 2000000080 After entering the character s ML e highlight in the window and mmol ema press OK on the RCU Press Exit button to close the find window and brings you back to the all list Add In all menu press Green button will open another window where you can choose between add one and add all Press Red button to mark a mp3 image video for add Marked mp3 TTT image video will be add after you confirm to save the changes when you leave this menu 36 Menu Operations Add All a Press Green button to show a add icon behind all mp3 image video name b Press MENU button you will be a 0000000 asked Are you sure to save 0000800 MM a 0000208 Select OK to add all mp3 0000000 0000080 image video Select Cancel to cancel the operation Find Press Blue button to open the Find window like showed beside Press Vol lt gt to select the leading character of the channel name and press OK to confirm it After entering the character s highlight OK in the window and press OK on the RCU Press Exit button to close the find window and brings you back to the
16. with Second Audio the system will play the second audio language as default If no audio language corresponds with the Second Audio then the default language of the current channel will be played instead The selections of audio language include English German 22 Menu Operations French Spanish Italian Portuguese Turkish Polish Russian Danish Greek Hungarian Arabic Farsi and Dutch Subtitle Language In OSD Setting menu use 4 to select On or Off If the current channel has subtitle information it will be displayed if this function is On If this function is Off subtitles won t be displayed The selections of subtitle language include English German French Spanish Italian Portuguese Turkish Polish Russian Danish Greek Hungarian Arabic Farsi and Dutch Teletext Press Text button in TV mode to open the teletext page This service is depending on the support of the channel provider If the channel does not support teletext information it will show No Teletext Data on the screen The selections of teletext language include English German French Spanish Italian Portuguese Turkish Polish Russian Danish Greek Hungarian Arabic Farsi and Dutch Press Menu Exit to return back from Language menu 5 2 TV System When you enter the TV System menu you will see the screen like below 1 Display Mode is used to switch the display mode In SD Mode You can
17. In TV mode press INFO button can open information screen in the window shows the parameters of current channel 10 Basic Operations 2 19 m When you play a recorded program press m button will stop the recorded channel playing and back to the Record Management menu When you are recording a program press button you will be asked to Do you want to stop record menu 2 20 In TV mode press 9 button you will be asked to Do you want to record menu 2 21 1 N FAV In TV mode press the FAV button to display the Favorite Group window on the screen as the picture beside shows In the Favorite Group window you can select the desired favorite channel with CH A V and confirm it with OK to switch to it In bigger groups you can navigate with PGUP PGDN With VOL lt P You can select different Favorite Groups Press Exit to close the Favorite Group window Frequently Asked Question Why the screen displays No Favorite Channel after pressing the Favorite button No channels have been assigned to a Favorite Group yet You can do this in the channel menu Basic Operations 2 22 Pil When you play a current or recorded program press gt Il will stop the program press gt Il again will play the program continually And Timeshift is started by this key 2 23 44 When you play a recorded channel press lt lt button to back the program fast an
18. Receiver Digital Decoder DVB T2 Set Top Box Installation Manual amp User Manual SAFETY PRECAUTION CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The exclamation point arrowhead symbol within To reduce the risk of within an equilateral an equilateral triangle is electric shock don t open triangle is intended to intended to alert the user the cabinet Refer alert the user to important to dangerous voltage to qualified operating and and to prevent from a risk personnel only maintenance servicing of electric shock WARNING The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus WARNING Do not place naked flame sources such as lighted candles on the apparatus otherwise there is the danger of fire WARNING The unit should be connected to a power supply only of the type descry bed in the operating instructions or as marked on the unit If you are not sure of the type of power supply for example 120 or 230V to your home consult your local dealer or local power company WARNING Do not open the cabinet or touch any parts in the inner mechanism Consult your local dealer for technical service if the opening is required WARNING The mains plug is used as the disconnect device the disconnect device shall remain readily operable WARNING Take attention to the environmental
19. all list play The play offer further functions to manage If you enter the play menu a window like the one below will open Title The color buttons offer further functions to manage the channel list etis Red When you play music program press Red will stop the program press Red again will play the program continually n Green When you play music program press Green button to back the program fast Yellow When you play music program press Yellow button to fast forward the program Blue Change play mode by Blue Key and play mode include Sequential Random Single repeat all repeat Press Exit to return to the previous menu 37 Menu Operations 7 1 2 Music Basically the operation of mp3 is same as all 7 1 3 Picture Basically the operation of Picture is same as all except that in the Yellow buttons offer further functions to manage In image menu press Yellow button will open another window press Red to set the image as osoase background press Green to delete the image as edere s background 7 1 4 Video Basically the operation of video is same as all 7 1 5 Music List The color buttons offer further functions to manage Delete In media list menu press Green button will open another window where you can choose between add one image and add all image Del One Press Red button to mark a image for add
20. aspects of battery disposal The battery of remote control should not be exposed excessive heat such as sunshine fire or the like WARNING Maintenance man must use the appointed screw in the rear plate WARNING Ensure a minimum distance of 5 cm around the apparatus for sufficient ventilation WARNING Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc WARNING Use the apparatus only in moderate climates not in tropical climates Note Do not open the cabinet to avoid the unit direct exposure to radiation Unit Cleaning After the unit power is turned off you can clean the cabinet panel and remote control with a soft cloth lightly moistened with a mild detergent solution Attachments Never add any attachments and or equipment without the manufacturer consent as such additions may result in the risk of fire electric shock or other personal injury Locating Slots and openings in the cabinet are provided for ventilation to protect it from overheating Do not block these openings or allow them to be blocked by placing the STB on a bed sofa or other similar surface nor should it be placed over a radiator or heat register Power Cord Protection Place the power supply cord out of the way where it will not be walked on Please take special attentions to cords at plugs convenience receptacles and the point where they exit from the uni
21. d Press gt gt to fast forward the program Selection 2x 4x 8x speed 2 24 GOTO When you play the recorded channels press Goto button the Jump to message box will pop up input the Time and press OK then the receiver will back to the input time point and play the program from that point continually If the input time is more than the recorded time the picture will back to last picture please noted Menu Operations 3 Channel Press Menu in the TV radio mode to enter the main menu 1 1 Press to select channel item d 2 Press OK to enter the selected item RENT 9 Media Management Select i T mine 1 In the channel menu Press to select the wanted menu item among TV Channel List Radio Channel List Channel setup Favorite group list name and Delete All Press OK to enter the selected item 3 1 TV Channel List If you enter the channel list menu a window like the one below will open 1 You can move the highlighted channel with CH A V and press OK to preview the highlighted program in the preview window FT A satelites 2 Press PGUP PGDN on the RCU to a U jump between the channels by pages 4 Press 4 to switch satellite of the program group 4 Press Menu or Exit buttons to enter TV playing mode 5 The color buttons offer further functions to manage the channel list 13 Menu Operations
22. e Auto Scan menu press Exit key to draw back from the scanning 4 2 Channel Scan When you enter to Channel Scan menu there will display the screen like right 1 There is two mode You can scan channel by channel or by frequency When scan band is UHF the range of Ch No is from 21 to 69 When scan band is VHF the range of Ch No is from 5 to 13 20 Hequency 060 1094000 s Signal Quality RIZZI 90 input Menu Operations 3 When you complete your modification move highlight to Search item and press OK key then it will begin to scan 4 Inthe Channel Scan item press Exit key to exit the scanning and save the current parameters 4 3 Channel Setup When you enter to Channel Setup menu there will display the screen like right Channel Channel Information 1 You can see the channel information MENU Frequency 424 000 3 004 like the picture displaying 2 Move the W A key can move the highlight to select the channel 3 When press OK key again you can see the window like right 4 Input PID information then move highlight to Search item and press OK key then it will begin to scan 4 4 Aerial Adjustment When you enter to Aerial Adjustment menu there will display the screen like right In Aerial Adjustment mode 1 Ch No Press lt b gt to
23. ed or it would be a not appropriated for this model of receiver an alert message would appear Error reading the USB disk After pressing OK the receiver will write into the Flash memory and it will reboot to end the upgrading process NOTE The upgrade file is the binary file bin Only the files which extend name is bin would be displayed User need put the upgrade file under root of USB card 6 4 2 OTA Upgrade This function can upgrade the software of your receiver through data sent by a satellite At the moment we offer satellite updates only through ASTRA1 and Hotbird satellites 1 Select the satellite and TP or input the TP value and download PID Then mark Start and press Enter to begin the download of the upgrade This may need up to 60 minutes Therefore we suggest using of this function only if you don t intent to watch TV during this time Auto OTA Config The system could upgrade automatically in standby mode When we enter the OTA upgrade option there will have pop up message The STB will reboot for OTA upgrade in 5 seconds 32 Menu Operations 6 5 CAS When you enter to CAS menu you will see a screen like beside CA In this option you can find information about the conditional access system lf there is no card or it is placed incorrectly information about No amp Unknown will be showed on the screen With a FELEC CAS card information about the card will be
24. ens sali Leni cani 19 CER RE 19 As installations aaa 20 a AVO SCAN scroll 20 42 Channel SCana SUELE 20 4 3 hane b sell 21 4 4 21 Di ES 22 Sul angie 22 S2 ic RP EEUU 23 5 3 Time amp Timer Setting ucc io onis RR o onc Oo 24 Contents ST MES DES pepe 27 Be Parental tein aisi 27 5 60 IPOWSISSOLITIO oti tbe DEUS auci is 28 6 TOOS elabora 30 T Informatlonas 30 SD Socorro 30 6 3 ABUS 31 64 Solware Upgrade sganciata 31 6 4 1 5 5 31 Ro MEG TE dE MP PEN Tt 32 c MP 33 Ta Media Management eire ida rin entes conr rao sc coa cond pe epa a eoe eate codo o dco a eene eeu veas 34 re ME Teal MERERI 34 V NEE PETERS 35 FoU ates ideas asino 38 Tlo Rice Tre fer deiecti EU EE MAE IET pie 38 ren Eoo FCD HD 38 Ki WSIS EISE uoo nes orat aes aces coke toa ERE Ede MERE sede peda ME Ras A SU 38 fio PICS LIST ita ARE E IL aad 39 res rM ero 39 Abo RECON MST ins
25. gt to switch between MB 200 MB and 500 Select MENU EXIT press MENU EXIT to reset to make tms size valid now Select Cancel press OK to cancel the operation Jump Step Value Press Vol gt to switch between 1 mins 3 Mins 5 Mins 10 Mins 15 Mins The value control the step of lt lt gt gt operation Record Type Press Vol 4 9 to switch between TS and Disk Press 4 to switch between C D Format Disk If you want to delete the hard disk totally you can do it with the OK Button Format and the hard disk will be completely erased Caution This process will delete also saves you have made with Backup tools Disk Information When select the Disk Information menu you will see a screen like beside The screen displays data about the current HDD Press Exit button to leave the information display 41 8 Technical Specification VIDEO Decoding Bit rate Output Aspect ratio Active pixel Output connector AUDIO Decoding Sampling rate DEMODULATOR Demodulation Guard Input data rate INPUT SIGNAL Frequency Input level MISCELLANEOUS Supply voltage Power consumption Operation temperature Storage temperature Dimension W D H Weight Technical Specification MPEG 2 amp MEPG 1 compatible Max 20Mbps PAL NTSC Auto 4 3PS 4 3LB 16 9 Auto SD 720x480 9 30fps 720x576 25fps HD 480p 576
26. lect Off and On Set the image as background Load OSD Setting Default If you want to reset your OSD settings to the default settings then select this item and press OK Press Exit button to leave the OSD Setting menu 5 5 Parental Lock You can set a password for anyone who wishes to operate the Installation menu You can also set the password to lock channels Below you find how to set and change the password 1 On Parental Lock press OK to open a dialogue box and input the password After you entered the correct password you Will see a screen like beside 27 Menu Operations Menu Lock If Menu Lock is set to Yes then you need to enter the password every time you want to open the menu If set to No then you can open the menu without entering the password first Channel Lock If set to Yes then you need to enter the password before you can see those channels which have been marked as locked channels in the channel menu If set to No then even those channels can be selected without entering the password first New Menu Password Here you can change the existing password You should do this after you set up the receiver the first time and every time when you think that your password is known by unauthorized persons To change the password enter the new password in the New Menu Password item and repeat the same one in the Confirm Password item If the passwords are not identically then
27. ll 05002462 2592 1944 24 bop 1726 Press Red button to open the Rename window like showed beside Press CHA V 4 to select the leading character of the channel name and press OK to confirm it 0080800000 080008000880 After entering the character s highlight in the window and 9 9 LLL duel pau med ETC press OK on the RCU LABi croun sos ner al Press Exit button to close the find window and brings you back to the Record list Delete Del One Press Red button to mark a mp3 image video for deleting Marked ataa mp3 image video will be deleted after you confirm to save the changes when you leave this menu Del All a Press Green button to show a deleting icon behind all mp3 image video name 35 Menu Operations b Press MENU button you will be asked Are you sure to save Select to delete all mp3 image video Select Cancel to cancel the operation Move Press Yellow button to show a moving icon behind the mp3 image video folder name Move the mp3 image video folder 1 05002462 1726 to the desired folder list with CH A 2592X1944K24 bbp Press OK to confirm the position Folder Press Blue button to open the New Folder
28. me information you will see the current time after you entered Local Time Setting menu If the channel doesn t provide time information you have to input the date and time information manually The most channels support the time signal Press Exit to leave the Time menu Sleep Timer Select Sleep Timer item and press OK to set the sleep timer You will see Sleep timer OFF Sleep timer 10 Sleep timer 30 Sleep timer 60 Sleep timer 90 Sleep timer 120 If you set a sleep time the system will change to standby mode after the chosen time period 26 Menu Operations 5 4 OSD Setting When you select OSD Setting you will see a screen like beside 1 Subtitle Display Press Vol 4 to select Off Standard or Teletext Subtitle If the current channel has subtitle information it will be displayed if this function is Standard or Teletext Subtitle If this function is subtitles won t be displayed OSD Timeout This setting determines the duration the info window is displayed on the screen when you change channels Press 4 to set the time between 1 to 10 seconds Position Press Vol 4 9 select the position between top and bottom OSD Transparency With this parameter you can set the transparency of the menus Press 4 select the value between 10 20 30 40 and Off means no transparency function Logo From USB Press Vol 4 9 to se
29. menu press Green button to place a skip icon behind the name of the highlighted channel Marked channels will be skipped when you change channels in TV mode after you confirm to save the changes when you leave this menu 3 1 4 3 Lock In channel edit menu press Yellow button to place a lock icon behind the name of the highlighted channel Marked channels will be locked and displayed only after password has been entered if you confirm to save the changes when you leave this menu 3 1 4 4 Edit Pressing the Blue button in the TV channel list edit menu will open another window where you can choose between edit the actual channel and create a new channel Edit 3950 H 27498 Press Red button to edit the channel V NPCR 602 603 602 1 Selecting the name item with OK lie Mice will display a button pad to show you how to edit the channel name 2 On the Video PID Audio PID and PCR PID items you can input numbers to modify the item s value 3 After modification select Save 602 603 602 and press OK button to save the Lux modified values and exit Edit mode Or select Exit and press OK to leave edit mode without saving the modifications Create Press Green button to open the create channel window 16 Press OK the Satellite item to display the satellite list You can select the satellite for which you want to create a new channel With
30. n STB owitch the Device s Main Power switch on When the STB is first used it will display Quick Setup window you will set Language First Audio Second Audio LNB Power Antenna Setup and Multi Search Frequently Asked Question Q A The power of my STB is on and it is running in TV mode but the TV screen shows nothing Make sure the TV set has been set to the correct video input not the TV channels For example if you have connected the unit to the video1 input of the TV set then you need to select the corresponding input of the TV Mostly it is done with the AV button of the TVs remote control unit My STB is running in TV mode but the TV screen shows nothing except one ball and No Signal That means the channel you selected has no signal This can be caused by several reasons The channel you selected is not from the satellite to which your dish is pointing Select another channel The signal of current TV channel is too weak You can try to change to other channels with a stronger signal If the problems still exist please consult your local dealer or installer for technical service You selected the wrong LNB type in the installation menu or your DiSEqC switch configuration is not correct 2 2 Standby Mode 1 2 Press Power button to switch from TV radio mode to standby mode In standby mode press Power button again to switch back to TV radio mode The last active channel will be showed To swi
31. orite group name 3 5 Delete All To delete all channels 1 Enter the password The default password is 0000 2 After entering the password correct a safety question will show up where you have to confirm first 3 Select to delete all channels or Cancel to cancel the operation and confirm with OK 4 step 1 and step 2 pressing Menu will exit the function directly without saving Frequently Asked Question Q IFlincautiously delete all channels what should do A there are two ways to restore gt To research all channels in the Installation menu Use Factory Default function to restore all channels in the Tools menu 19 4 Installation Menu Operations When you enter to Installation menu there will display the screen like right In Installation menu 1 4 1 Press W A key to select menu pages among Auto Scan Channel Scan Channel Setup and Aerial Adjustment Press W A key to select menu items among each items Press OK key to enter the selected item Auto Scan Sjalvvirkandi leiting When you enter to Auto Scan menu there will display the screen like right Firstly please select the country in System Setup Menu Region and Time 1 Region In Scan Mode item press lt P gt key to select scans all channels or just scans free channels Moving the highlight to Search item and press OK key to start scanning In th
32. p 720i 720p 1080 RCA TV SACRT MPEG 2 MPEG 1 layer 8 Il 32 44 1 48 COFDM 2k 8k 1 4 1 8 1 16 1 32 5 31 VHF UHF 78dBm 20dBm 100 240 50 60Hz 10 watts max 45 to 40 20 to 470 160 140 40mm 1 2 Kg 42
33. really want to do this Menu Operations This operation will load the default st channe l t channel The 4 Press Exit in both steps will close the window without resetting the receiver 6 4 Software Upgrade When you enter to Software Upgrade menu you will see a screen like beside 1 Press CHA to select the wanted item among USB STB Upgrade STB STB Upgrade Backup To USB OTA Upgrade and Net Upgrade 2 Press OK to enter the selected item 6 4 4 USB STB Upgrade This option allows updating the software of the receiver with the received data from a USB memory device To do it connect a USB memory device to the receiver and accede to this menu option The last software version to be loaded must be placed at the root path of your USB device 1 Upgrade Mode the mode of the upgrade to be chosen Press 4 to select Software Whole User Interface Default DB CAS and Ch List amp Setting 31 Menu Operations In the Software item press 4 to select the file which you want to scan or press OK to open the USB list to select directly with CH A V and press OK to finish the selection otart Press OK to start upgrade Once the file has been loaded it requires the conformity to end the upgrading process writing into the receiver Are you sure to burn flash Press OK to upgrade the receiver In case during the reading of the file it is corrupt
34. select from PAL NTSC Auto In HD Mode You can select from Auto 5761 4801 576P 720P 50 10801 25 720 50 10801 30 Press Vol lt P gt to switch the desired mode Aspect Mode is used to switch the screen aspect ratio mode You can select the needed mode from Auto 4 3 PS 4 3 LB 16 9 with Vol lt gt Video output is use for switching the screen aspect ratio mode Now we provide below options HD SD You can press 4 key to select each mode circularly Digital Audio Out is used to switch the output audio mode You can select the needed mode from LPCM Out BS Out with Vol lt gt Press Menu Exit to return to the previous menu 23 Menu Operations 5 3 Time amp Timer Setting When you enter Time amp Timer Setting a menu with this 3 items will be opened 1 Timer Select Timer item and press OK to enter the Timer menu You can press CHA W to select item The current time will be displayed in the first column If the current time is incorrect please modify it with the Number buttons Timer Number You can press Vol 4 gt to switch the timer number There are totally 16 timers Timer Mode Select how often the timer is running Once Daily Weekly Monthly and Yearly or switch the timer to off Timer Service Select between TV Channel Radio Channel and Message V PR When you select TV Channel ille i gina Porn Radio Channel timer setting
35. t Object and Liquid Entry Never put objects of any kind into this STB through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill any liquid on the STB Note Moisture may be formed inside the unit in the following conditions When the unit is suddenly moved from a cold environment or an air condition room to a warm place Immediately after a heater has been turned on In a steamy or very humid room If the moisture forms inside the unit it may not operate properly To correct this problem turn on the power and wait about two hours for the moisture to evaporate Parts Replacement When the unit parts need to be replaced user should make sure the service technician use the replacement parts specified by the manufacturer or having the same characteristics as the original part Unauthorized replacement may put the unit in the risk of fire electric shock or other hazards Safety Check After all the maintenances and repairs are done user is required to request the service technician to conduct the overall safety check to ensure the machine is in the proper condition Contents Contents 1 Remote Control Panel Description eese 3 iI Front Panel DescHpllOD indo rua t ats Rd vare bx aS 3 1 2 Bear Panel Description i sisi 4 1 3 Remote Control Description nemen 5 2
36. tch off the STB complete press the main power button Basic Operations 2 3 Mute 1 Press the Mute button to mute the sound On the screen an icon will be displayed to indicate the muted sound 2 Press the Mute button again to restore the sound 2 4 Channel Number In TV mode you can enter the channel number directly with your remote control unit and confirm the number with the OK button to change to the desired channel 2 5 TXT 1 Press TXT button in TV mode to open the teletext page This service is depending on the support of the channel provider 2 f the channel does not support teletext information it will show No HT EN Tote bei Explosionen in zwei Hotels in Jakarta NEWST I CKER Teletext Data on the screen 2 6 PAUSE In playing mode press PAUSE the picture will be paused but the sound of the channel will still continues 2 Press PAUSE again the screen s picture will skip over to the current playing picture and the sound of the channel will corresponding playing 2 7 MENU Press Menu button to enter or exit the current menu 2 8 EXIT Press Exit button to exit the current menu 2 9 In TV Radio mode press to change channel 7 Basic Operations 2 10 4 In TV Radio mode press Vol gt to adjust volume 2 11 1 OK In TV mode press OK button to open the Channel List window Press the Red exchange screen Press
37. utomatically show a reminding message The message will be displayed on the screen until you press Exit to close it Duration Here you can set the time you want to see or play this channel When the time is reached whenever the system is in standby mode or playing a channel the system will automatically switch to the channel you select and play the channel within the duration time you set The minimum duration unit is one minute After the duration time the system will automatically switch to otandby mode Press Exit to leave the Timer menu 25 2 Local Time Setting When you select Local Time Setting and press OK then you will see a window like the one beside Menu Operations GMT Usage This item is used to set the time by using the time signal from the satellite Press Vol 4 gt to change the setting The GMT Offset item is only available when GMT Usage is set to On Press Vol lt gt to set the GMT Offset value With every time you press the button the time offset will be increased decreased by half an hour Summer Press Vol gt to switch this function On or Off Date and Time items are only available when the GMT Usage is set to Off Press Vol to select one item and use number buttons to input time and date directly Time Display Press Vol 4 5 to switch this function On or Off NOTE If the current channel provides the correct ti
38. you will see a warning message If you entered the same new password in both fields then you will see the message Saving Data Please Wait From now on you need to use the new password to open locked menus or locked channels NOTE The default password is 0000 Basically the operation of New Chan channel Password is same as New Menu Password Press Exit to leave the Parental Lock menu 5 6 Power setting When you select this option you will see a screen like beside 1 Automatic Standby press OK to open the Automatic Standby menu gt Automatic Standby Press Vol 4 gt to select Off and On gt Time Press 4 to select ihr 8hr 28 Menu Operations ANT Power If your receiver is connected to the ANT directly then you need to set the ANT Power to On If your receiver is connected to a multi switch SMATV signal distribution system then it may be that you don t need to provide the power to the LNB But since this is depending on the kind of installed distribution system we recommend you to contact your installer or to refer to the user manual of this system to get the correct information You also just can change this setting and check if you still can receive the channels If the ANT Power is off and you still can see all channels then we recommend this setting Low Power Consumption At this option you could Enable Disable the low power consumption mode
Download Pdf Manuals
Related Search