DBX-98 - Alecto
Contents
1. lel Pyle 0 Lights up when the parent unit is switched on Hold down for 3 seconds to switch the baby unit on or off To select a different lullaby Decrease volume button Increase volume button 6 Power adapter connection 7 Temperature sensor see back of the baby unit 8 Key dc 9 Key start stop button to play lullabies button to switch the night light on or off 10 Built in night light only visible in the dark 2 INSTALLATION 2 1 PARENT UNIT The parent unit is powered by the two supplied rechargeable batteries These batteries can be charged using the included power adapter Take Note Only use rechargeable batteries Normal batteries are not rechargeable and may explode if charging causing irreparable damage to the parent unit 1 Slide the battery cover located at the back of the parent unit down wards in order to take it off 2 Place the two supplied rechargeable batteries in the battery compart ment taking note of the polarity and Only use batteries with the following specifications Power Capacity 1 2V 400 mAh or more Type Format NiMH AAA HRO3 3 Slide the battery cover back on again 4 Place the power adapter into a 230Volt electrical wall outlet and place the parent unit onto the charger using the 6VDC connection 5 The Battery indicator light will light up and the batteries will be charged Beware the light will continue to shine when the power adapter is2. is 2 3 full _ Battery is 1 3 full advised to charge batteries L Battery empty the parent unit will now switch off connect a char ger to charge the batteries When the battery empty indicator lights up a alarm will sound every 30 seconds and the LOW BATT icon will flash in the display 4 5 POWER SUPPLY Adapters Only use the supplied adapter and not other adaptors Connecting a power adapter other than the supplied adapters may cause damage to the electronics of the baby monitor Batteries The parent unit can only be charged using RECHARGEABLE bat teries with the following specifications Type NiMH Nickel Metal Hy dride re chargeable format AAA pencil cell HRO3 1 2V power 400mAh or higher 12 4 6 MAINTENANCE Clean the baby monitor only with only a damp cloth Never use che mical cleaners Before cleaning any attached power adapters should be disconnec ted 4 7 EVIRONMENT The packaging of this baby monitor can be recycled as old paper Should this product reach the end of its life cycle do ms not dispose of it into the normal household waste Rather take it to a collection point for the recycling of electrical and electronic equipment Old or damaged batteries should be disposed of in an environmen tally friendly manner according to your local regulations Do no throw away used batteries together with your household waste 5 DECLARATION OF CONFORMITY This device complies with the essen
3. link between the parent unit and baby unit has been dropped for more than 30 seconds e Check whether the baby unit is turned on e Check the power supply of the baby unit e Check the distance between the parent unit and baby unit change if necessary The volume is off turn it on The volume is too loud and is giving a ringing tone feedback Turn down the volume on the parent unit Increase the distance between the parent unit and the baby unit There are no batteries placed in the parent unit Also if the batteries have been incor rectly installed defective or they don t make a good connection you will not be able to turn the parent unit on The batteries provide power for the parent unit the adapter only ensures that the batteries are being charged For extra information please consult www alecto info 14 TABLE OF CONTENTS OVERVIEW OVERVIEW PARENT UNIT OVERVIEW BABY UNIT sat INSTALLATION PARENT ONE aE gt 2 ne nent en HOW USE ONO FS VT CMe ES une HUNK OHEGK Ne de LISTENING nee ste DISPLAY LANGUAGE CULLA BIE 5 et he WARNING TONES es het aient NIGR RER ne ra ane VACK BAG en TEMPATURE DIP SIA Y fan RESET FACTORY SETTINGS nent GENERAL SAFETLY
4. INSTRUCTIONS AND TIPS GENERALES nat aie DECLARATION OF CONFORMITY TECHNICAL MULFUNCTIONS 5 GARRANT Y 9 GARRANTY The Alecto DBX 98 has a guarantee of 24 MONTHS after the date of purchase We guarantee during this period the free repair of defects caused from the material and workmanship Some things are kept for the assessment of the importer If you notice defect first consult the manual If the manual does not give a definite answer please contact your dealer or the service of Alecto at telephone number 31 0 73 6411355 TERMINATION OF GUARENTEE For improper use faulty connections leaking and or incorrect battery placement the use of non original parts or accessories negligence and damage caused by fire flood lightning and natural disasters If unauthori zed modifications and or repairs are done by third parties For incor rect transportation without a suitable container and if the device is not accompanied by the warranty card and purchase receipt Rechargeable batteries are not covered by the guarantee Any further liabilities especially for any consequential damage are exclu ded Service Alecto Azi laan 12 s Hertogenbosch e WWW HESDO SERVICE
5. NL INFO HESDO SERVICE NL Help 5 SERVICE ALECTO DE 9 NL 31 0 73 6411 355 A FR 32 0 3 238 5666 DE 49 0 180 503 0085 v1 1
6. USER MANUAL DBX 98 1 OVERVIEW 1 1 OVERVIEW PARENT UNIT ere Display Link check flashes when there is no link JA lights up when playing lullabies lights up when the sound war ning has been setup POWER light lights up when sound is set to 0 off lights up when night light has been activated HE Battery indicator Light Indicators Lights up when the level of volume is set Lights up when sound from the baby s room is heard This is the talk back button which allows you to talk into the baby unit Lights up when the parent unit is switched on Flashes when the parent unit is searching for a connection with the baby unit Press down for 3 seconds to switch the parent unit on or off Decrease volume button Press to switch the user function on or off See the back of the parent unit allows you to carry the parent unit with you 8 Battery light 9 Keys 10 Keys A Lights up when the power adapter is connected note DOES NOT turn off even when the batteries are full Flashes if the batteries are running low Back button while setting up Increase volume button 11 Battery compartment see back of parent unit 12 Power adapter connection 1 2 OVERVIEW BABY UNIT 1 POWER light 2 On off button 3 4 Key 5
7. abled the amp icon will be light up on the display 3 7 NIGHTLIGHT The night light can be switched on or off using the baby unit or remotely switched off from the parent unit From the baby unit Press the button on the baby unit to switch the night light on or off From the parent unit Pres the MENU key Select the option NIGHTLIGHT using the v and A keys Press 2x on the MENU key to switch the night light either on or off Light on indicator When the night light is switched on the icon will light up Press the TALK button located on the parent unit to talk back to the baby unit let this button go again in order to listen Use the and keys to adjust the volume of the talk back function When you use the talk back function while playing a lullaby the lullaby will start playing for another 15 minutes after you have finished using the talk back function 3 9 TEMPERATURE DISPLAY When the baby is at rest the temperature in the baby room will be shown in degree Celsius on 0 1 the display of the parent unit The range of the temperature display is between 12 C and 35 C When the temperature exceeds these limits a warning will be shown on the display LOW TEMP or HIGH TEMP changed furthermore should the temperature go beyond these limits a warning sign LOW TEMP or HIGH TEMP will be shown as a alarm Take note the temperature limits of 12 C and or 35 C cannot
8. be Please note that the temperature displayed is only a indication of the temperature and can have a deviation of 1 C at 25 C 3 10 RESET FACTORY SETTINGS If you have lost the overview of your device you can easily reset back to the factory settings Press the MENU button al Select the RESET option using the and keys 2 Press 2 on the MENU key to reset the factory settings Factory Settings Volume level 3 Night light off Display language Dutch Sound Alarm off 4 GENERAL SAFETY INSTRUCTIONS AND TIPS 4 1 GENERAL The baby monitor should only be used as an assisting device and not as a substitute for an adult or baby sitter Check the function ability of the baby monitor each time before use In addition to checking the range and connection control it is recom mended to regularly check the connection during usage The DBX 98 should not be used for anything else than for detecting sounds from within your own private premises anyone else within the listening perimeter of the baby monitor should be informed A license is not required in order to use the wireless baby monitor The system can be used as needed within the home There is no guarantee however that the signal will always have an interference free signal If the baby monitor and parent unit are not being used it is advisable to turn them off using the on off button 4 2 USING MUTIPLE BABY MONITORS The technology beh
9. connected the light will also stay on when the battery is full Additional remark Always place the battery in the parent unit even if you are only using it in the house The parent unit only works if the adaptor is connected to the power adaptor The parent unit can be used immediately The display shows the charging development of the batteries depending on the settings of the baby monitor the parent unit will be turned either on or off how high the volume level is the baby cries a lot the batteries will the fully charged after 12 to 24 hours 2 2 BABY UNIT The baby unit is powered through the sup plied power adapter Only connect the supplied AC adapter with the following specifications Input 100 240VAC 150mA Output 6VDC 450mA lt Connect the power adapter to the 6 VDC connection located on the parent unit then put the power adapter into a 230 Volt electri cal outlet 2 3 PLACEMENT TIPS e DO NOT place the baby unit in the bed with the baby and keep minimum distance of 2 meters between the baby and the baby unit e SURE THE BABY NOT TOUCH THE ADAPTER CORD e Do not place the baby unit or the parent unit in direct sunlight or in a damp place The baby monitor is not waterproof Too much moisture may cause damage to the electronics 3 HOW TO USE Please note that this baby monitor should only be used as an added as sistance The unit does not replace the physical presence and
10. e lights will light up on the parent unit 3 4 DISPLAY LANGUAGE The various instructions and messages on the display can be given in different languages The default language is set to Dutch The language can be set as follows Menu Press the MENU button Select the LANGUAGE option using the keys Vand A Menu Press the MENU button language Menu Press the MENU button to confirm your selection Press the 2 button to exit the settings al Use the V and keys to select the desired 3 5 LULLAIBIES The baby unit has 5 different programmed lullabies The selected lullaby will be played for 15 minutes Press the button once on the baby unit in order to start or stop the lullaby To change the lullaby pres the 2 button to select a new lullaby Adjust the playback volume using the and keys Indication shown on the display During the playback the J3 icon and the name of the lullaby will appear on the display 3 6 WARNING TONES If the sound of the parent unit has been turned off a warning beep tone can still be set to go off should the baby unit detect a noise Press the MENU key a Select the SOUND ALERT option by pressing on the W and A keys 2x Press 2x on the MENU button to switch this func Menu tion on in case it was switched off or switch off in case this function was switched on Press the 2 button to exit the settings Sound alarm indicator When the sound alarm is en
11. ind the DBX 98 makes it possible for more DBX 98 baby monitors baby unit and parent unit to be used next to each other in order to monitor multiple baby rooms simultaneously and still have an interference free signal each parent unit and baby unit is equipped with a unique code This code prevents the DBX 98 from picking up sounds from other baby monitors in the area or that other baby monitors pick up the sounds coming from your baby monitor It is not possible to expand your DBX 98 with additional single baby units or single parent units 4 3 RANGE The connection range of the baby monitor is up to 300 meters in an open field and 50 meters in a house the range can differ according to external conditions concrete walls other baby monitors cordless phones etc 4 4 BATTERY USAGE Fully charged NiMH batteries with a capacity of 400mAh can supply the parent unit with power for more than 12 hours without needing the power adapter The time depends on the amount of usage how often the baby cries switching the sound of the parent unit on talking into the monitor level of the volume etc You can check the battery status on the display of the parent unit Connect the charger when the battery icon gives the battery empty sign The charging time in order to fully charge an NiMH battery with the capacity of 400mAh is between 12 till 24 hours The display of the parent unit displays the battery status Battery is full a Battery
12. oversight of a parent or guardian 3 1 ON OFF SWITCH 3562 Press the on off button for approximately 3 seconds to turn the device 3 sec D Press the on off button for approximately 3 seconds to turn the device off 3 2 LINK CHECK When the parent unit has been switched on it will search for the baby unit 1 When the parent unit has been switched on it will search for the baby unit in the display the word NOT LINKED will flash and the antenna icon will light up 2 The power light will light up continuously when the parent unit has an established connection with the baby unit and the temperature of the baby room will be shown If the parent unit has not found the baby unit after 30 seconds because the distance is too big between the baby unit and parent unit an alarm sound will go off every 30 seconds 3 3 LISTENING Receiving Volume Press the W and keys on the parent unit in or al der to set the volume level 5 levels sound off e The set volume level will be shown with the indication lights e When the maximum or minimum volume has been reached an additional double beep sound will be heard when pressing the or Ke e The symbol will appear in the display when the volume is set to 0 no sound 2 Optical sound indication _ R The lights on the parent unit will light up when the baby unit detects sound The louder the sound that is picked up by the baby unit the mor
13. tial requirements and provisions as defined in the European Directive 1999 5 EC The declaration of conformity is available on the website at WWW ALECTO INFO 6 TECHNICAL SPCIFICATIONS Number of channels 120 selected automatically Frequancy 1881 792 1897 344 MHz Power supply baby unit power adaptor 6V 450mA lt incl Ten Pao SOO4LV0600045 Power supply parent unit power adaptor 6V 450mA lt incl Batteries 2x 1 2V 400hAh NiMH rechargeable size AAA HRO1 incl Transmitting power 250mW max Advised room temperature between 10 C and 39 C Storing temperature between 0 C and 60 C 7 MALFUNCTION TABLE MALFUNCTION POWER Light flashes with words NOT REGIS TER POWER Light flashes with words REGISTER alarm tone coming from the parent unit No sound coming from the parent unit Beep tones coming from the parent unit When the two lights loca ted on the right side of the parent unit light up weakly but the parent unit cannot be switched on POSSIBLE CAUSE AND REMEDY The connection link between the parent unit and baby unit has been dropped The dropped connection link can be caused by an outside interference wait a few seconds and see if the connection is automatically restored If this happens regularly it could be that the parent unit and the baby unit are at maximum range of each other decrease the distance to see if this helps The connection
Download Pdf Manuals
Related Search