Jabra HANDSET™ 450 for Cisco
Contents
1. hours If the handset is not docked it will turn off after 3 minutes Charging time Less than 3 hours Operating temperature 10 C to 55 C 14 F to 131 F Storage temperature 40 C to 70 40 F to 158 F Jabra YOU RE ON A BRAND BY 2013 GN Netcom US Inc All rights reserved Jabra is a registered trademark of GN Netcom A S All other trademarks included herein are the property of their respective owners 2013 GN Netcom A S All rights reserved Jabra is a registered trademark of GN Netcom A S All other trademarks included herein are the property of their respective owners Made in China MODEL WHBO04HS amp WHBO04BS C www jabra com2. 50 for Cisco will charge when docked in the handset cradle The handset cradle must be plugged into a USB port and the PC must be turned on The battery light will change to flashing yellow when there is less than one hour of battery remaining 1 hour of charging 40 charge 3 hours or charging 100 charge HOW TO USE THE JABRA HANDSET 450 FOR CISCO LED Indicator USB port Answer call Pick up the handset End call Dock the handset in the cradle Adjust speaker Tap the Volume up or volume Volume down button Tap the Mute microphone button Mute microphone _ WHAT THE LIGHTS MEAN What you see What it means Power on Power off The Jabra Handset 450 for Cisco is in pairing mode Incoming call Active call Voicemail The handset is out of range of the handset cradle Device firmware update mode The Jabra Handset 450 for Cisco microphone is muted BEES BEB VXI only Not for Jabber version 9 5 or earlier TECHNICAL SPECIFICATIONS Weight Cradle 175 g Handset 185 g Assembled unit 360 g Dimensions Cradle L211 mm x W 57 mmx H 36 mm Handset L 203 mm x W 44 mm x H 47 mm Assembled unit L211 mmx W 57 mm x H 60 mm Microphone Omni directional Speaker Dynamic 28 mm Operating range Up to 20 m 66 feet DECT version Dect 6 0 CAT iq Talk time Up to 14 hours Standby time 120
3. Jabra YOU RE Jabra HANDSET 450 for Cisco 5 JABRA HANDSET 450 FOR CISCO 2 CONNECTING HOW TO USE THE JABRA HANDSET 450 FOR CISCO 4 TECHNICAL SPECIFICATIONS ccssssssssssssssssssssssessssesssssssseeeesssssss 6 JABRA HANDSET 450 FOR CISCO OVERVIEW S Speaker down Speaker USB port LED Mute up Indicator microphone TURNING ON OFF The Jabra Handset 450 for Cisco will always be powered on when docked in the handset cradle and the cradle is plugged into a USB port To turn off the Jabra Handset 450 for Cisco press and hold 5 secs the mute microphone button Press the mute microphone button again to turn back on The Jabra Handset 450 for Cisco cannot be turned off if the cradle is plugged into a PC that is turned on AN The Jabra Handset 450 for Cisco will automatically power off when out of range 20 m or 66 ft of the handset cradle for 4 minutes or longer CONNECTING The Jabra Handset 450 for Cisco is plug and play 1 Connect the USB cable to the handset cradle and then plug the USB cable into any available USB port on your PC 2 Dock the Jabra Handset 450 for Cisco in the handset cradle The handset and the cradle are already paired To pair a new handset with the cradle simply dock the new handset in the cradle Only one handset can be paired with the cradle at a time CHARGING The Jabra Handset 4
Download Pdf Manuals
Related Search