Home
User Manual - D-Link
Contents
1. Enable Select this option if the SMTP server requires authentication Authentication to successfully send emails C Username After authentication was enabled enter the SMTP user nn Us account s username here Tunae Password After authentication was enabled enter the SMTP user account s password here Mail Settings From Address In the Mail Settings section the following parameters can be configured meee sala From Address Enter the sender s email address here so that the recipient can recognize who is sending the email er From Name Enter the sender s name here Mail Test Reply Address Enter the recipient s email address here Mallox Address pama Reply Name Enter the recipient s name here Word Wrap Enter the word wrap value here By default this value is 80 In the Mail Test section the following parameters can be configured Parameter Description Mailbox Address To test if the recipients email address is active enter the Copyright 2014 D Link Corporation recipient s email address here and click Test Click the OK button to accept the changes made Page 61 D Link Central WifiManager Software User Manual Central WifiManager Configuration User Manager After clicking on System in the top panel and User Manager in the left panel the following page will be displayed On this page we can view create and co
2. date 2014 07 03 2014 07 03 eventlevet at W node IP keyword q all Security Channel O if i RogueAP ai SysLog E NO Event Name Event Type Monitor The sending protocol entity has reiniti 5 i alized indicating that the agent s confi ia 14 ColdStart standardTrap notice 2014 07 01 15 04 57 192 168 70 50 l a m Monitor List guration nor entity implementation ma The sending protocol entity has reiniti E Type Se pare alized indicating that the agent s confi Standard E ee ColdStat standard Trap notice 2014 07 01 15 43 23 192 168 70 51 i iste n guration nor entity implementation ma Private y be altered E Watch The sending protocol entity has reiniti Watch Manager l alized indicating that the agent s confi z E ColdStat standard Trap notice 2014 07 01 16 52 02 192 168 70 52 ee j o E Watch List guration nor entity implementation ma y be altered The sending protocol entity has reiniti alized indicating that the agent s confi ColdStart standard Trap notice 2014 07 03 09 12 38 192 168 70 51 j oe o guration nor entity implementation ma y be altered The sending protocol entity has reiniti alized indicating that the agent s confi Ss ColdStat standard Trap notice 2014 07 03 09 12 38 192 168 70 52 HOA o guration nor entity implementation ma y be altered The sending protocol entity has reiniti alized indicating that the agent s confi E 6 ColdStart standard
3. DA ink Version 1 00 09 18 2014 User Manual D Link Central WifiManager D Link Central WifiManager Software User Manual Table Of Contents Prod ct OvervieW rrismonsnireisnnrin E E sus ates eoeneceeenceetes 3 iS S18 EIEII EIE E EA A E N A E N N E AE E 64 System Requirements aaseseieraxnaediesernorendiasxiecintnauitceind inadaevvniaasdud duiasiod dine vawasendmenaaencadaciuadanneeees 3 PRSSOC lA TOM viscncicntetstcaiortinatsnnndadacneabieadansamonenetualehiadadevguhinmeniedasataiubearenhadimentangaesde 64 Software Installation somicoussianccorinnmsnceieseunrguneadamaniauneianecnaiuaontvedabammiicninninanis 4 By ACCESS Point 0 sees ee terete teeeititeieeiteneeneeneeneenceeenntintenteneensenttate 64 Central WifiManager Server Installation 00 00ccccccccccceeecceseesceseeseeseerseseeseeseeseeeeenees 5 By Wireless Station essences nseeneneeesneensentensenstnntensens 65 Access Point Module Installation sssssssssssssssseeceesssssssnnnnsnnnnmssssseseseeeeeeessee 11 AON HIN Tsetse einen te testes e Central WifiManager Server Application E AECE REEERE Lise 13 Security EE E E E E E E A A E E E E A E A 67 Access Point Installation TOoI ccccccccscccesecceeeceeeseeeeceeeseseceeeageeseeesenesaeeeneeens 15 o A i a Central WifiManager Configuration nnnmmmnnmnnnnnnnninnrnninnnninne 19 Channel gg HOME cccccccccccccececececececececeaeaeaeaeaeneeuecueueuaeaeaeaeaeaeaeeuensueneeaeaeaeaeaeaeataeaeueuenneneataes 20 R
4. Page 37 D Link Central WifiManager Software User Manual After selecting Remote RADIUS as the Authentication Type we can configure access points in this network to act as authenticator devices that will communicate and relay authentication messages to an additional RADIUS server installed in the network The following parameters can be configured Parameter Description Remote RADIUS This field will display the remote RADIUS server type that Type can be used The remote RADIUS server type is SPAP RADIUS Server Enter the RADIUS server s IP address here RADIUS Port Enter the RADIUS server s port number used here By default this value is 1812 RADIUS Secret Enter the RADIUS server secret here Accounting Mode Select to Enable or Disable the RADIUS server accounting feature here Accounting Server _ _ Enter the RADIUS accounting server s IP address here Accounting Port Enter the RADIUS accounting server s port number here By default this value is 1813 Accounting Secret Enter the RADIUS accounting server s secret here Central WifiManager Configuration Create SSID User Authentication Authentication Type Remote Radius y Each Configuration Only Allow One SSID to Use Passcode For Authentication r Remote Radius Settings Radius Server Settings Radius Server Radius Secret Remote Radius Type Radius Port 4812 r Accounting Server Settings Accounting Mode
5. Page 70 D Link Central WifiManager Software User Manual Central WifiManager Configuration 5 2014 07 01 17 51 amp Sign Outadmin After clicking the Em button the following page will be available On this page we oe a Central A can initiate a scan for unclassified access points within the wireless range of access D Ere n a 5 ap points connected to our network Configuration System Monitor About Report Report gt RogueAP Click the Detect button to initiate the scan ste D oea Channel RogueAP Seyra Assort AP SysLog Monitor Manager Monitor List E Type Standard Private E Watch Watch Manager E Watch List Copyright 2014 D Link Corporation Page 71 D Link Central WifiManager Software User Manual After clicking the Detect button the following page will be available On this page we can select an access point in our network that will be used for the scan After selecting an access point click the OK button to start the scan Click the Cancel button to cancel the scan and return to the main page SysLog Montor x Model Name NetMask igen bah HW ver Central WifiManager Configuration 5 2014 07 01 17 52 Q Sign Outadmin ah Configuration System Monitor D Central WifiManager Report Report RogueAP Association Step1 Detect AP Detect Security Channel pico sO RogueAP Step2 Select Device 192 168 70 50 DAP 2330 255 255 255 0 C4A81
6. Untag members tagged Tag or non members Not Mii 2 a oe Member r 2 4GHz Select All Which this button is clicked all the ports in the table will be changed to either be Untag Tag or Not Member Untag Mgmt This is the management port on access points me a LAN1 LAN2 This is the LAN ports on access points If the access point has only one LAN port it will be LAN Primary This is the primary WLAN SSID on access points in this network e SSID1 SSID7 This is the secondary WLAN SSIDs on access points in this Not Member network ES Click the Save button to accept the changes made Page 45 D Link Central WifiManager Software User Manual Central WifiManager Configuration VLAN In the PVID Setting tab we can view and configure the Port VLAN Identifier PVID settings for access points and wireless client in this network The following parameters can be configured T Pete erent Pv setin PVID Auto Assign Select to Enable or Disable the PVID automatic assign k i Status status feature here SENSOUUEENNGTNS COENEN GIENEN PVID Enter the PVID number in the spaces provided for the corresponding ports ae mm Mgmt This is the management port on access points LAN1 LAN2 This is the LAN ports on access points If the access point has only one LAN port it will be LAN1 Primary This is the primary WLAN SSID on access points in this nme network MSSID Port o ssiD6 ssiD7 SSID1 SSID
7. Authentication Type Disable Each Configuration Only Allow One SSID to Use Passcode For Authentication _ Enable White List MAC Address x Copyright 2014 D Link Corporation Page 31 D Link Central WifiManager Software User Manual After selecting the WEP Open System option as the wireless security method the following parameters are available for configuration Parameter Description Encryption Select this option to Enable or Disable the WEP Open system encryption method for this network Key Size Select the WEP key size here Options to choose from are 64 Bits 128 Bits and 256 Bits Key Type Select the WEP key type here Options to choose from are HEX and ASCII Key Index Select which key in the index of four will be used for this network Options to choose from are First Second Third and Fourth Key Value Enter the open system WEP encryption key here based on the selections made After selecting the WEP Shared Key option as the wireless security method the following parameters are available for configuration Parameter Description Encryption Select this option to Enable or Disable the WEP Shared Key encryption method for this network Key Size Select the WEP key size here Options to choose from are 64 Bits 128 Bits and 256 Bits Key Type Select the WEP key type here Options to choose from are HEX and ASCII Key Index Select which key in the index of four will be used for this networ
8. Click the Cancel button to stop and exit the installation The Apache HTTP Server application might be blocked by the computer s firewall If Windows default firewall is used a security alert message will be displayed Click the Allow Access button to allow this application to communicate with the network In this window the user is reminded that apart from the Central WifiManager installation each access point that will be used in this application requires a separate module to be installed This will be discussed in the next section Click the Finish button to complete and exit the installation wizard Page 10 Setup Status Central Wifi anager is configuring Your new software installation Installing CA D Link Central With anagerapachez4binslibpg dll InstallShield o Cancel Web Param Setting Please install the module which you want to manage before running Central Wifi Manager Server lt Back Finish Cancel D Link Central WifiManager Software User Manual Software Installation Access Point Module Installation For each access point that will be used in the D Link Central WifiManager we need to install an additional manager module In this section we ll discuss the installation of the DAP 2330AP access point s manager module that will be used in the D Link Central WifiManager NOTE If the Central WifiManager Server is already running it must be stopped and closed before that Access
9. Gateway 192 168 70 1 OK Cancel Advanced Only you press the correct password you can success to set ip User Name admin Password Authentication C MDS HMDS Page 16 D Link Central WifiManager Software User Manual Software Installation Access Point Installation Tool After clicking the OK button to set the IP address the access point will be configured and some time will be given for the access point to restart after the new IP address was applied A oa o r IP Address Model Name HV Version MAC Address NetMask SNMP FW version Action i l _ 192 168 70 51 DAP 2660 A COAOBB48D450 255 255 255 0 Enable 1 05 The Status parameter will display the progress of the IP address configuration and V 192 168 70 52 DAP 2660 A C0A0BB48D400 255 255 2550 Enabe 1 05 a 192 168 70 50 DAP 2330 C4481D90CDBS 255 255 255 0 Enable 1 01 access point reboot This utility also allows us to upload the network data file directly to the access point B installation tool to configure the group information that this access point will use to identify in which a A network it belongs Fie ca stp set crouninto IP Address Model Name HV Yersiqg Server connection test Action Status _ 192 1 68 70 51 DAP 2660 A Each port can detect whether the server is connected properly Click the Set GroupInfo button to upload the network data file After click the Set Y
10. 192 168 70 52 DAP 2660 A r e a Reset OK i d i _ 192 168 70 50 DAP 2330 A Grouplnfo button we can click on the button to navigate to the saved network data file on the computer and then upload it ws Click the Test button to test if the data file is in fact a valid network data file Click the Advanced button to use advanced login options for the access point as discussed earlier Page 17 D Link Central WifiManager Software User Manual Access Point Installation Tool After clicking the Test button to successfully test if the network data file is valid the following message will be displayed Click the OK button to initiate the upload Click the Cancel button to cancel the upload After clicking the OK button the network data file will be uploaded the access point will be configured based on the settings within the data file and will then reboot The Status parameter will display the progress of the configuration For more information about configuring networks and generating network data files used in this upload refer to Network on page 27 Installation tool IP Address Model Name Hy Versio _ 192 168 70 51 DAP 2660 192 168 70 52 DAP 2660 _ 192 168 70 50 DAP 2330 A A A Model Name Hy Version File D Writer Folder 01 Active Projects OA ManagerR1 0C Server connection test Each port can detect whether the server is connected properly please cl
11. Event Name Enter the event s name here This name will be used to iain ray Tap Gonene Caister x identify the event in the table mentioned before AuthenticationFailure Sans Cam R Trap Generic Select the generic trap that will be used for this new E Type EgpNeighborLoss OID trap here Options to choose from are Coldstart 0 aii comer re Description 5 WarmStart 1 LinkDown 2 LinkUp 3 E Watch LinkDown SNMPv2 AuthenticationFailure 4 EgoNeighborLoss 5 and Walch Manager ENRON EnterpriseSpecific 6 When modifying an existing trap this ae rare see field cannot be changed Enterprisespecific Status Select to Enable or Disable this specific trap here Private OID Enter the Object Identifier OID number for this trap here When modifying an existing trap this field cannot be ais Critical changed a Description Enter the trap s description here Level Select the level for this trap here Options to choose from are Critical Error Warning and Notice a i Click the New button create a new trap event Click the Delete button to delete the selected trap Click the OK button to accept the changes made Click the Cancel button to discard the changes made and return to the main page Page 83 D Link Central WifiManager Software User Manual Central WifiManager Configuration In the Notice tab we can enable the notification feature when a standard trap event was generated for a specifi
12. mara Click the Reset button to clear out the information entered in the fields above Click the Cancel button to discard the changes made and return to the main page Page 79 D Link Central WifiManager Software User Manual Central WifiManager Configuration Monitor List After clicking on Monitor in the top panel and Monitor List in the left panel the following page will be displayed On this page we can view a graphical chart of the monitor manager watchdog events create on the previous page The list of created events will be displayed under the monitor list option in the left panel 5 2014 07 03 09 23 E Out admin Central pews re 3 Click the gt button to run the monitor event D fe nd System Monitor Click the Oo button to stop the monitor event Report Association Security oo if Click the button to export the contents displayed in this table to the computer en n o Selected Profile gt Access Point 1Status Ready accessing this interface This export supports the following file format PNG ie IP Address Monitor Manager o Monitor List Access Point 1 In this example we created a monitor manager event called Access Point 1 Monitor gt Monitor gt Monitor List gt Access Point 1 E Type Standard Private E Watch Watch Manager Watch List Unit string Copyright 2014 D Link Corporation Page 80 D Link Central WifiManager Software User Manual Central Wi
13. thus it is not needed to install the software on the remote computer NOTE Connection to the Central WifiManager Server uses a secure HTTPS connection After the Web browser was open and connection to the server was made successfully a login window will appear Enter the login user name and password in this spaces provided and click Login to enter the Central WifiManager Configuration NOTE By default the user name and password is admin Page 19 hitps Mocalhost P gt f G Certificate Error Navigation X There is a problem with this website s security certificate The security certificate presented by this website was not issued by a trusted certificate authority The security certificate presented by this website was issued for a different website s address Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server We recommend that you close this webpage and do not continue to this website Click here to close this webpage x Continue to this website not recommended More information D Link Building Networks for People Central WiFiManager User Name Password D Link Central WifiManager Software User Manual Central WifiManager Configuration Dashboard After successfully logging into the server the Dashboard page will be available On this page summarized information of the connected access points and wireless clients will be
14. which the upload will be initiated Status Time After selecting the Specify Time or the Specify Date option Result select the time at which the upload will be initiated iii Day After selecting the Specify Time option select the day s on which the upload will be initiated Click the Complete button to accept the changes made or to manually initiate the upload In the Run Status section the following parameters can be configured Parameter Description Off On Toggle this option to On to enable the scheduled configuration upload configured Toggle this option to Off to disable the scheduled upload To reconfigure the schedule settings this option must be turned off After the first upload the Next Run Time field will display when the next upload will take place After every upload the Result hyperlink will be made available for review D Central WifiManager Site Page 52 Configuration gt Site gt Headquarters gt Server Room gt Uploading Configuration Home Configuration System About Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration Firmware Upgrade After clicking on Firmware Upgrade in the left panel the following page will be available On this page we can view and configure the firmware file upload schedule or initiate the upload of the firmware file to all access points in this network manu
15. 03 10 47 amp Sign Out admin Central G D WifiManager E wz 5 ap Configuration System Monitor About version 1 00 r0025 Copyright 2014 D Link Corporation Copyright 2014 D Link Corporation Page 94 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access Appendix A Front Desk Staff amp User Access Front desk user accounts can be created to allow guests to use the wireless network for a limited amount of time Normally restricted wireless access is given to front desk wireless users In this section we ll discuss how to create and use a front desk staff account and how generate guest pass codes To setup a front desk staff account we need to enter the Central WifiManager 2014 07 14 09 58 Sion Outadmin Server application with an administrative account Navigate to System in the top Central A menu and User Manager in the left menu D WiFiManager t e maa 5 t Configuration System Monitor About System gt User Manager Click the o button to create a new user account User Manager All Users 1 Root Admin 1 Root User 0 Local Admin 0 Local User 0 Front Desk Staff 0 User List T UserName Privilege CreateDate Resume Action admin Root Admin 2012 08 03 03 34 46 default user Ey 1 total 1 1 Page 5 2014 07 14 10 00 amp Sign Outadmin After clicking the K3 button the following page will be available The
16. A list of configured entries will be displayed in the table Click the icon to remove a specific entry In the User Authentication section we can configure the authentication method that will be applied to all the wireless clients that connect to access point in this network The following parameters can be configured Parameter Description Authentication Type Select the authentication type that will be applied to the wireless clients in this network Options to choose from are Disable Username Password Remote RADIUS LDAP POP3 and Passcode After selecting Disable as the authentication type this feature will be disabled Central WifiManager Configuration Create SSID Enable MAC Filter MAC Address No MAc adaress otto 1 00 11 22 33 44 55 im User Authentication Authentication Type Disable v Each Configuration Only Allow One SSID to Use Passcode For Authentication Page 36 D Link Central WifiManager Software User Manual After selecting Username Password as the Authentication Type we can apply local authentication to each wireless client in this network Local authentication means that no external server is needed to help with the authentication process Authentication is applied based on restricted subnets username and password authentication based on the accounts created here and the group that they belong to The following parameters can be configured Parameter Description Restricted S
17. Accounting Server Accounting Secret Disable v Page 38 D Link Central WifiManager Software User Manual After selecting LDAP as the Authentication Type we can configure access points to use an additional LDAP server to handle user authentication in this network The following parameters can be configured Parameter Description Server Enter the LDAP server s IP address here Port Enter the LDAP server s port number used here Authenticate Mode Select the authentication mode that will be used here Options to choose from are Simple and TLS Username Enter the administrator s username here that will be able to access and search the LDAP database Password Enter the administrator s password here that will be able to access and search the LDAP database Base DN Enter the base domain name of the LDAP database here For example cn users dc test dc com means that the wireless client is a member of the group users in the domain test com Central WifiManager Configuration Create SSID a User Authentication Authentication Type LDAP vy Each Configuration Only Allow One SSID to Use Passcode For Authentication LDAP Settings Server Port e Authenticate Mode Simple v Username Password Base DN fou de Account Attribute exen Identity oO Auto Copy Account Attribute Enter the attribute for the account h
18. Central WifiManager Server application These modules allow seamless communication between the server and the access points using the Simple Network Management Protocol SNMP For more information refer to Access Point Module Installation on page 11 e The Access Point Installation Tool This utility can be used to find new access points on the network change the IP address of each access point and upload the network data file for each access point For more information refer to Access Point Installation Tool on page 15 Included at the end of this document we have the following appendices with additional information that can be helpful to the reader e Appendix A Front Desk Staff amp User Access on page 95 e Appendix B Standard amp Private Trap List on page 105 Page 4 D Link Central WifiManager Software User Manual Central WifiManager Server Installation Software Installation In this section we ll discuss the installation procedure for the D Link Central WifiManager software After running the installation file a welcome window will be displayed Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation In this window the destination location is displayed where the software will be installed If this application needs to be installed at a different location or on a different drive click the Browse button and navigate to the new dest
19. Cipher Type Group Key Update Interval PassPhrase Radius Server Port fez After selecting the WPA Enterprise option as the wireless security method the following parameters are available for configuration Parameter Description Cipher Type Select the WPA cipher type here Options to choose from are 095 920o Auto AES and TKIP an Group Key Update Enter the WPA group key update interval value here By une ro Interval default this value is 3600 RADIUS Server Enter the RADIUS server s IP address here ees Port Enter the RADIUS server s port number used here By die La default this port number is 1812 WAP Settings RADIUS Secret Enter the RADIUS secret pass phrase used here aes cae A ees PassPhrase Radius Server Port 1812 Radius Secret Page 33 D Link Central WifiManager Software User Manual After selecting the WPA2 Personal option as the wireless security method the following parameters are available for configuration Central WifiManager Configuration Create SSID Basic Settings Wireless Settings Cipher Type Select the WPA2 cipher type here Options to choose from zee are Auto AES and TKIP a Group Key Update Enter the WPA2 group key update interval value here By Siir i Interval default this value is 3600 SSID Visibilly Pass Phrase _ Enter the secret pass phrase used here iww Wi Fi Multimedia After selecting the WPA2 E
20. Manager E Watch List 5SGHz Channel Usage Channel _ _ 4 Channel Counts 2 lt i yel Cp a p 100 108 Copyright 2014 D Link Corporation Page 69 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on Monitor in the top panel and Rogue AP in the left panel the following page will be displayed On this page we can view information about new rogue valid and neighboring access points The purpose of this page is to scan for access points in the network and then to classify them into categories In the New AP tab we can view a list of new access points in the environment 2014 07 10 10 11 amp Sign Outvadmin Access points displayed here have been detected by access points in our network Dio A A o rt and were classified as new access points anager a Configuration System Monitor About Report Monitor gt Report gt RogueAP Click the Er button to scan for unclassified access points within the range of the ai Security Be dh access points connected to our network nee RogueAP Click the button to export the contents displayed in this table to the computer et a BSSID Model ssiD accessing this interface This export supports the following file formats TXT PDF TTE k cant i Hot and Excel Monitor List Event Type Standard Private E Watch Watch Manager Watch List Copyright 2014 D Link Corporation
21. Point Installation Tool is an additional utility that compliments the D Link Central WifiManager This utility can be used to scan for new D Link access points in the network regardless of what IP range they are configured in and then pre configure them to be used in the Central WifiManager After opening the Access Point Installation Tool the following window will be available Click the Discovery button to scan for D Link access points that are connected to the network with an Ethernet cable After clicking the Discovery button this utility will scan the network for D Link access points that are connected to the network with an Ethernet cable This utility will find D Link access points regardless of what IP address they re configured in Time Out 3 Retry i Discovery Set IP Set Grouninto IP Address Model Name HWY Version MAC Address NetMask SNMP FY version Action E installation tool IP Address Model Name HVY Version MAC Address NetMask SNMP FW Version Action 255 255 255 0 255 255 255 0 255 255 255 0 COAOBB48D450 COA0BB48D400 C4481 DS0CDBS C 192 168 70 51 DAP 2660 A 192 168 0 50 DAP 2660 A 192 168 70 50 DAP 2330 A Enable 1 05 Enable 1 05 Enable 1 01 Elapsed Time Page 15 00 00 03 D Link Central WifiManager Software User Manual Software Installation Access Point Installation Tool To change the IP address of an access point disco
22. Type Dio ok re ae Site in the first drop down menu and then selecting the network in the second HikiManager ak Configuration System Monitor About drop down menu Report Monitor gt Report Association Association Click the button to regenerate this report 7 noe From 2014 07 01 17 30 34 To 2014 07 01 17 35 34 GroupType Site N All Groups Q it RogueAP P 4 In the table a list of access points will be displayed by station number if they have Syslog DateTime fP Address Station s Number sd active wireless client connections connected to the access points managed by ia 2014 07 01 17 30 43 192 168 70 50 2 7 this application Information like Date Time IP Address and Station s Number is secre 2014 07 01 17 30 58 192 168 70 50 2 i displayed for each station CET 2014 07 01 17 31 08 192 168 70 50 2 E Type 2014 07 01 17 31 23 192 168 70 50 2 s a n 1 a Standard F In the line graph a graphical representation of the Station Number over time will be ken na i bins cali E displayed per IP address E Watch 2014 07 01 17 31 43 192 168 70 50 2 Watch Manager 2014 07 01 17 31 58 192 168 70 50 1 E Watch List Click the button to export the contents displayed in this table and chart to the POSSO computer accessing this interface This export supports the following file formats p e a A _ TXT PDF and Excel os a 192 168 70 50 Station Nunber amp zs v gt 1 175345
23. WifiManager Server application After the installation was completed the following applications will be available Ji D Link ny Central WitiManager gt E Settings T Automatically open configuration window when Windows start up F Central WifiManager T Automatically start server when configuration window is open Click the Central WifiManager Server option to open the server application After running the Central WifiManager Server application the window on the right pea f ao j 2014 7 01 10 06 47 Syslog Server Start success will appear This is the management console window for the server application SAAT ROE AT ERP Sones cane 2014 7 01 10 06 47 SnmpT rap receiver initialize successtully In the Menu bar there are two option available Server and Help Under the Server menu we can Start Stop or Exit the application Alternatively right under the Server menu option there are also start and stop icons that do exactly the same thing Under the Help menu option there is an About option that will after being clicked display the name version and copyright details of this application CommLog APLiveLog DataRefreshLog AutoContiglog Central WifiManager Server is offline Page 13 Software Installation D Link Central WifiManager Software User Manual Central WifiManager Server Application In the Settings section we can select to Automatically open configuration window when Windows start up a
24. admin DAP 2330 and the DAP 2660 This means that we can have multiple DAP 2330 and per A re Q DAP 2660 access points installed on the network but only required to install two WifiManager W aks aa ae modules One for each type of access point T Settings System gt Settings i i ere Modul Database Advanced SMTP NOTE The module executable files for all the access points supported in the application can be downloaded from the D Link website ibaa Nata acetal Checking for the latest module and Firmware version More information about the installed access point modules can be found in the Module Information section Module Name Module Information To keep the installed modules and firmware versions for access points up to date DAP 2330 gi ems click on the Check Now button DAP 2660 Module Name DAP 2330 Click the OK button to accept the changes made Description AP Manager Module v1 01r08 2014 06 24 Product Version 1 01 Online Check Version x Support Band 2 4GHz oo v gt lt DAP 2330 A 1 01 J DAP 2660 a 1 05 Copyright 2014 D Link Corporation After clicking on Check Now the following page will be available On this page the application will check if the installed access point modules are up to date Page 57 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking o
25. configure advanced time settings for some features hosted by this application The following parameters can be configured Parameter Description Set Timeout Enter the maximum time allowed for settings to be made in this application This is the time from the click of a button until the request was received by the server By default this value is 5 seconds Enter the time the Web application will wait after a reboot request was send by the server to access points By default this value is 50 seconds Configuration Enter the time the Web application will wait after a Update Time configuration file update was initiated to access points by the server By default this value is 60 seconds Factory Reset Time Enter the time the Web application will wait after a factory reset was initiated to access points by the server By default this value is 60 seconds Enter the time the Web application will allow for firmware downloads initiated by the firmware update check feature By default this value is 80 seconds Enter the time the Web application will wait after a firmware flash update was initiated by the server to access points By default this value is 300 seconds Enter the timing tolerance time value here By default this value is 5 seconds Reboot Time FW Download Time FW Flash Update Time Timing Tolerance Time Click the OK button to accept the changes made 5 2014 07 01 17 02 E Out admin Mo
26. displayed After configuring sites a list of sites will be available for selection in the site drop down menu Underneath the site drop down menu the following four blocks with pie charts can be seen Block Descri tion 5 2014 07 01 16 55 amp Sign Out admin Station In this block the number of wireless clients connected to the Die A db access points in this network will be displayed per wireless E Configuration System ome About frequency supported The pie chart illustrate this information Dashboard Home gt Dashboard visually All Sites Band In this block the number of wireless frequency bands hosted eect Band Sum Band Sum Model Sum z Status Sum ine by the access points in this network will be displayed per 2 4GHz 1 E 2 4GHz 3 E DAP 2660 2 sd OFF line AP T fine f frequency band supported The pie chart illustrates this schz o sorz 2 DAP 2330 4 On line AP 3 information visually Model In this block the number of access points in this network will o gt oe Cc gt be displayed per product code The pie chart illustrates this information visually Access Point In this block the number of online and offline access points a Ae Spiayeo eerie Heine cian iUatealeo ale A information visuall z 1 002191809574 192 168 70 50 Click to set alias G WPA Personal 100 Primary SSID In the Station Detail table a list of connected wireless clients will be
27. front Front Desk Staff 2014 07 14 10 09 11 2 Aw ere 2 total 1 1 Page In the next step we need configure our guest wireless network to use pass codes ee for user authentication Navigate to Configuration in the top menu and select your D orem an r tt a ae imi itelalelel ig network in the left menu In our example the guest network is located within the B P F IEEE eaea oe Server Room network at the Headquarters site Site Configuration gt Site gt Headquarters gt Server Room gt SSID E Headquarters Lo j i E Server e In this example the guest network s SSID is called SR Guest To enable pass code Room i PE EE SSID F r 3 user authentication for this SSID click the E button in the SR Guest entry to modify ce eee Sasi stisci Gl th e S SID oe SSID1 SR Guest 2 4GHz Open System Disable Ey i n Optimization Captive portal RF Optimization Device setting Uploading Configuration Firmware Upgrade Undefined AP Page 96 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access 5 2014 07 14 10 19 Q Sign Outadmin After clicking the E button the following page will be available Here we can modify the parameters of the SSID called SR Guest D an 45 o z i WifiManager Home Configuration System Monitor About In the User Authentication section select Passcode as the Authentication Type Configuration gt Site gt He
28. list of access points in the environment that have been detected by access points in our network and were classified as neighbor access points D Central an WifiManager Report Monitor gt Report gt RogueAP Click the E button to scan for unclassified access points within the range of the access points connected to our network Channel Ned Maer eel AAF Neighbor AP RogueAP Click the 2 button to export the contents displayed in this table to the computer site seni iaei at se a i s Aree accessing this interface This export supports the following file formats TXT PDF EER i og era A and Excel Monitor List 1 C4A81D90CE2D N A_2310B_SSID5 Evet 1 005080112254 G DSL 2890 IOT E Type 1 1CAFF78B3D72 G dlink elin test Standard 3 DO0AA1234563C G jamesg Private 6 9094E4FBFBBS G dlink FBBS8 E Watch 6 8CBEBE76C79F N CYH_MI_AP 6 COAOBBF6387C G 880 gg9 Watch Manager 4 9094E4FF46B8 G dlink 46B8 an 6 O0090A9A56745 N 24GGGGG 6 COA0BB492480 G A_Free_P1 6 001BFBO0A4B4 N MyNetN600 07 2 4G 5 28107BD60AD0 G WLAN168 6 00C001CAFE80 G tom_dir880 6 009049456715 N Nora_Pro_2 4G 6 AOF3C15C77D3 N manpwernw 6 207C8FAD2749 N Vivo Internet 2749 6 OOS0A9A5A640 N WD_24 LO 6 78542EAD6200 N 2690b_249 6 0090A9A5A62B N WestemDigital_Kevin Vv 2 1CRNROGA1929N M inhnnv TQ A Page 76 Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration After clickin
29. peee mm 2 4GHz Allocate average BW for each station Primary SSID 26 Mbits sec 26 Mbits sec Ey Copyright 2014 D Link Corporation Click the Clear button to clear out all the information entered in the fields Click the Save button to accept the changes made Click the icon to modify an existing rule Click the icon to delete an existing rule Page 47 D Link Central WifiManager Software User Manual Central WifiManager Configuration Captive Portal After clicking on Captive Portal in the left panel the following page will be available On this page we can view and configure the captive portal settings for access points and wireless clients in this network The following parameters can be configured Parameter Description 5 2014 07 01 13 58 Q amp Sign Out admin Web Redirection Select this option to enable the web redirection feature Die an 4S ro A it Web Site Enter the redirection web site s URL address here Configuration system Monitor Upload picture from To upload and use a picture file click on Browse and Site Daaa Ss Headquasten sSarves Rouse Capra pote file navigate to the image file located on the computer E Headquarters Ve reared ag s Web Site SSID Upload picture from file Browse picture file type jpg size lt 300k Click the Save button to accept the changes made VLAN E Bandwidth Optimization Captive portal RF Optimization Devic
30. untagged member Untag VID of the VLAN In the last column the PVID number of that specific port will be displayed Central WifiManager Configuration VLAN List Bedi Be Ser eee ile VID VLAN Name Untag VLAN Ports Mgmt LAN1 LAN2 Primary 2 4G SSID1 2 4G SSI D2 2 4G SSID3 2 4G SSID4 2 4G SSID5 2 4G SSID6 2 4G SSID7 2 4G Primary 5G SSID1 5 Ey G SSID2 5G SSID3 5G SSID4 5G SSID5 5G S S ID6 5G SSID7 5G Tag VLAN Ports Edit Delete Ei 1 default y S Port Name Tag VID Untag VID Mgmt Primary 2 4G Primary 5G SID1 2 4G SSID2 2 4G S SID3 2 4G SSID4 2 4G SSID5 2 4G SSID6 2 4G SSID7 2 4G SSID1 5G SSID2 5G SSID3 5G SSID4 5G SSID5 5G SSID6 5G SSID7 5G lc ll rl M rl M M M lO ll lO llc rl CC ll lO ll MA ee ee ee Page 44 D Link Central WifiManager Software User Manual Central WifiManager Configuration VLAN In the Add Edit VLAN tab we can create a new VLAN and assign the port membership to each port in that VLAN After clicking the Modify icon in the VLAN List tab we will be re directed to this tab to modify an existing VLAN The following parameters can be configured m fetta coca vian Fane VLAN ID VID Enter the VLAN s ID here VLAN Name Enter the VLAN s name here wee oe ee S Port Select the port membership option for each port in this column Port in VLAN in this network can either be untagged i E
31. 07 01 17 31 43 2014 07 01 17 31 34 2014 07 01 17 31 23 2014 07 01 17 31 08 2014 07 01 17 30 58 2014 07 01 17 30 43 2014 07 01 17 30 33 MAC Address 002191809574 002191809574 002191809574 002191809574 002191809574 002191809574 002191809574 002191809574 002191809574 002191809574 Alias IP Address 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID Primary SSID 10 total 1 1 Page Band 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz 2 4GHz Authentication WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal WPA Personal RSSI 100 100 100 100 100 100 100 100 100 100 From 2014 07 01 17 30 30 To 2014 07 01 17 32 29 Type KeyWords Q it Power Save Mode OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration By Station Number On this page a report was generated By Station Number This report can be refined 2014 07 01 17 35 amp Sign Out admin by selecting the date and time From and To and then selecting the Group
32. 25 D Link Central WifiManager Software User Manual Central WifiManager Configuration After creating a new site it will be displayed in the Site List table In this example we 2014 07 01 12 22 amp Sign Ouvadmin created a site called Headquarters D Central a WiFiManager Configuration System Click the button to add another site Site Configuration Site i i a a z Headquarters Click the E icon to modify an existing site r i ite List TCR EA EE r Ein ete Headquarters admin admin 2014 07 01 12 21 26 Ey it Copyright 2014 D Link Corporation Page 26 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on the site link called Headquarters in the left panel we can see the 5 2014 07 01 12 23 Sign Out admin list of networks that have been created for the site in the Network List table on the per _ i WifiManager aM page Configuration System Monitor Site Configuration Site gt Headquarters Click the button to add a new network for this site El eateeteas Co Network List Network Name Admin Member Creator Creat Date Modify Delete Export Copyright 2014 D Link Corporation Page 27 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create Network After clicking the button to add a new network the following page will be available On this page users can creat
33. 44 1 1 14 07 01 17 31 34 ti 1 4 1 07 0 7 34 09 De 4 24 07 01 17 34 34 Copyright 2014 D Link Corporation Page 66 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on Monitor in the top panel and Security in the left panel the following page will be displayed On this page we can view a report of the wireless security configurations of all the access points managed by this application Security reports are displayed by Chart or by List On this page a Chart report was generated displaying all the available security levels Fee a ae on the access points managed by this application This report can be refined by Dio ok re rt selecting the Site in the first drop down menu and then selecting the network in the aeeanoser id ae ae ee second drop down menu aad sicher Regi Secu Association Click the button to regenerate this report Site All Groups PE if RogueAP L J This report counts the available amount of SSIDs hosted by the access points in the Syslog network and then evaluating which security level they are configured at and then a Reve seal presenting them graphically in this chart per security level Monitor List Dan Click the button to export the contents displayed in this chart to the computer i teas accessing this interface This export supports the following file formats TXT PDF Private and Excel ee Watc
34. 5 10 2014 07 01 15 06 48 2014 07 01 15 27 01 2014 07 01 15 43 30 2014 07 01 15 43 38 2014 07 01 15 43 44 2014 07 01 15 43 44 2014 07 01 16 52 09 2014 07 01 16 52 17 CF Es Description Delete gt 192 168 70 50 Bj 192 168 70 50 Ei 192 168 70 50 192 168 70 50 Ei 192 168 70 50 Ei 192 168 70 51 Ei 192 168 70 51 z 192 168 70 51 E 192 168 70 51 zi 192 168 70 52 E 192 168 70 52 V Copyright 2014 D Link Corporation 42 records current page 1 1 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking the i button the following page will be available On this page we can configure the private SNMP event and notice settings that will be used to display messages on the Private page when that type of event has occurred on the network In the Event tab the following parameters can be configured Parameter Description fr Report gt Event gt Event amp Notice Settings 5 2014 07 03 09 55 amp Sign Out admin About tt Monitor Configuration System Event To modify an existing private trap select it in this section Do After selecting an existing trap its parameters will Banago automatically be entered in the Event Settings section for Report modification To create a new trap do not select any event in Association this section inomi SNMP Version Select t
35. 7 This is the secondary WLAN SSIDs on access points in this network Click the Save button to accept the changes made Page 46 D Link Central WifiManager Software User Manual Central WifiManager Configuration Bandwidth Optimization After clicking on Bandwidth Optimization in the left panel the following page will be available On this page we can view and configure the bandwidth settings for access points in this network The following parameters can be configured Enable Bandwidth Select to Enable or Disable the bandwidth optimization Optimization feature here Downlink Bandwidth Enter the total downlink bandwidth speed for access points in this network here This value is in Mbits sec Enter the total uplink bandwidth speed for access points in this network here This value is in Mbits sec Select the type of rule that will be create or modified here Options to choose from are the following e Allocate average BW for each station The AP will distribute average bandwidth for each client e Allocate maximum BW for each station Specify the maximum bandwidth for each connected client Reserve certain bandwidth for future clients e Allocate different BW for 11a b g n station The weight of 802 11b g n and 802 11a n clients are 10 20 70 and 20 80 The AP will distribute different bandwidth for 802 11a b g n clients e Allocate specific BW for SSID All clients share the total bandwidth Band Select the wire
36. 92 168 70 50 192 168 70 51 192 168 70 51 Authentication Encryption Security Level Band HAW Version WPA Personal enabled Open System disabled WPA Personal enabled WPA Personal enabled Open System disabled Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on Monitor in the top panel and Channel in the left panel the following page will be displayed On this page we can view a graphical chart report of the wireless channel usage per frequency band This report can be refined by selecting the Group Type Site in the first drop down 2014 07 01 17 38 Sign Out admin menu and then selecting the network in the second drop down menu D Central A A o rt WiFiManager Configuration System Monitor About Click the button to regenerate this report Report Monitor Report Channel a GroupType Site VAI Groups aA if In the first chart report we can view the channel number count for the 2 4GHz Sa eae annel Usage wireless frequency band RogueAP Oae SysLog iaj In the second chart report we can view the channel number count for the SGHz PTEE wireless frequency band eaaa l O Click the button to export the contents displayed in these charts to the computer teas FEE accessing this interface This export supports the following file formats TXT PDF Private and Excel ion Watch
37. D90CDB8 A Monitor Manager Monitor List 192 168 70 51 DAP 2660 255 255 255 0 C0A0BB48D450 A 192 168 70 52 DAP 2660 255 255 255 0 C0A0BB48D400 A E Type Standard Private E Watch Watch Manager E Watch List Copyright 2014 D Link Corporation Page 72 D Link Central WifiManager Software User Manual After clicking the OK button and after the scan was completed this page will be available On this page a list of unclassified access points within the wireless range of the previously select access point in our network will be displayed To classify access points in this list select the check box next to the entry click the E button and select the classification category from the list Options to choose from are New Rogue Neighborhood and Valid To filter the display entries in the table to only display a certain category select the Type option from the drop down menu Filter display options are All New Rogue Neighborhood and Valid Click the OK button to classify the selected access points into the category selected Click the Cancel button to cancel the process and return to the main page D Central WifiManager i Central WifiManager Configuration oi Configuration System RD Detect AP Report Report gt RogueAP Association Security Channel RogueAP Creve Assort AP 5 2014 07 01 17 54 Q amp Sign Outadmin Monitor About C Be Typ V Mo
38. K button to accept the changes made Copyright 2014 D Link Corporation Page 58 D Link Central WifiManager Software User Manual Central WifiManager Configuration In the General sub tab the following parameters can be configured Backup In this section we can manually backup the system data to the computer accessing the Web interface Click Backup Now to initiate the manual backup The backup file is a PostgreSQL file with the file extension of SQL Restore In this section we can manually navigate to a backed up file and restore those settings to this application Click Browse and navigate to the previously backed up SQL file and then click Restore Now to initiate the restore Click the OK button to accept the changes made 5 2014 07 01 17 02 Q Sign Out admin About T t System D Central WifiManager Settings Monitor System gt Settings ere TES Database Ba0rclins ei EL a You can backup the system data as well as restore from a previoulsy saved one here Backup Backup to local hard driver Restore Browse Limit to 500M Choose backup file Copyright 2014 D Link Corporation Page 59 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on the Advanced tab the following page will be available On this page we can view and
39. On Firmware Upgrade Next Run Time N A Undefined AP Status Running Result Update multi config 3 3 Progress id Page 98 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access After the configuration file was uploaded to the access points the Status option in 2014 07 14 11 40 amp Sign Outvadmin the Run Status section should show Complete Central _ ok D WiFiManager D 0 ab Home Configuration System Monitor About Site Configuration gt Site gt Headquarters gt Server Room Uploading Configuration Headquarters r Schedule Settings 5 mia Run SSID Specify Time VLAN O Specify Day poke Date P0i4 07 14 Time 11 38 26 a EEEN Day Mon _ Tue Wed Thu Fri _ Sat C Sun RF Optimization Device setting Uploading Configuration Off On Off Firmware Upgrade Next Run Time N A Undefined AP Status Complete Run Status Result Success Click to View Result Progress Next we need to add the new front desk staff user account to the site s network 2014 07 14 11 41 Q Sign Outvadmin member list Navigate to the Configuration in the top menu and select the relevant pere t i site in the left menu In this example our site s name is Headquarters meee anager Configuration System Monitor Site Configuration gt Site gt Headquarters All networks wi
40. P 2330disassociateAttack DAP 2330deauthenticateAttack DAP 2330wlanlfLinkUp DAP 2330memoryPoor DAP 2330cpuLoadingFull DAP 2330telnetLoginFail DAP 2330webNotify DAP 2330sshLoginFail DAP 2660deAuthentication DAP 2660dfsFindinChannel DAP 2660stationDisassocNotify DAP 2660stationAssocNotify DAP 2660wlanlfLinkDown Event Settings A SNMP Version Event Name Trap Generic Coldstart 0 N Status Disable O Enable OID Description A v Level Critical Y K E v Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration In the Notice tab we can enable the notification feature when a private trap event was generated for a specific warning level The following parameters can be configured Parameter Description 2014 07 03 10 37 Sign Out admin Warning Level Select the warning level here Options to choose from are Ren an QA A i nas IFMaNnNager Critical Error Warning and Notice Configuration System Monitor About Send E Mail After the warning level was selected select this option to Report gt Event gt Event amp Notice Settings enable the email notification feature for the selected warning Association ey i Noti level a pi S tie T O E T O O S 4 Channel Waming Level r Notice Mail Settings Recipient Enter the recipient s emai
41. PA Auto Personal_ Y WAP Settings Cipher Type Group Key Update Interval PassPhrase Radius Server Port fez After selecting the WPA Auto Enterprise option as the wireless security method the following parameters are available for configuration EEE peecon Cipher Type Select the WPA WPA2 cipher type here Options to choose saa from are Auto AES and TKIP ae Group Key Update Enter the WPA WPA2 group key update interval value here iiv Interval By default this value is 3600 oe Enable V RADIUS Server Enter the RADIUS server s IP address here asiain ae Port Enter the RADIUS server s port number used here By Sih WPA Auto Enterprise 57 default this port number is 1812 WAP Settings RADIUS Secret Enter the RADIUS secret pass phrase used here ee Group Key Update Interval 3600 PassPhrase Radius Server Port Radius Secret Page 35 D Link Central WifiManager Software User Manual In the Access Control section we can configure which network devices can have access to the network or not by specifying the MAC of the accepted or rejected devices The following parameters can be configured Parameter Description Enable MAC Filter Select this option to enable the MAC filtering feature MAC Address Enter the MAC address of the networking device that will be used for this configuration here Action Select the action that will be applied to the networking device Option to choose from are Disable Accept and Reject
42. Point manager module can be installed After running the access point s manager module a welcome message will be displayed to inform the user that the manager module will now be installed on the computer Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation After clicking next in the previous step the access point s manager module will be installed Click the Cancel button to stop and exit the installation Page 11 Welcome to the InstallShield Wizard for DAP 2330 AP Manager Module The Install hield wizard wall install DAP 2330 AP Manager Module on your computer To continue click Next C ia Setup Status DAP 2330 AFP Manager Module ts configuring your new software installation Installing C D Link Central Wit anager Plugins 0 4AP2330apH elo all Ee s InstallShield Cancel D Link Central WifiManager Software User Manual Software Installation Access Point Module Installation After the access points manager module was installed successfully this window will appear Click the Finish button to complete and exit the installation wizard TERA A EEEREN EER The InstallShield Wizard has successtully installed DAP 2330 AP Manager Module Click Finish to exit the wizard Coa Ss ee Page 12 D Link Central WifiManager Software User Manual Central WifiManager Server Application In this section we ll discuss the Central
43. Schedule Settings RF Optimization Run Device setting Specify Time emai et De Firmware Upgrade Date 2014 0701 Time 18 00 o0 Undefined AP Day Mon Tue Wed v Thu Fri v Sat v Sun r Run Status Off On On Next Run Time 2014 7 01 18 00 00 Status Ready Result Progress Copyright 2014 D Link Corporation Page 54 D Link Central WifiManager Software User Manual Central WifiManager Configuration Undefined AP After clicking on Undefined AP in the left panel the following page will be available On this page we can view a list of access points that do not belong to a network configured in any site To add an access point in this list to a network select the check box next to the entry 2014 07 01 17 41 Sign Out admin and click the icon on the top right of this page A list of available networks will Do A REA re A U be displayed that can be selected for the move nt ae ae Configuration gt Undefined AP Headquarters se r Undefined AP List E NO Status Client Channel Last Checkin IP Address MAC Address Module Name Version m uo 0 0 11 108 2014 07 01 17 39 39 192 168 70 52 C0A0BB48D400 DAP 2660 1 05 Copyright 2014 D Link Corporation Page 55 D Link Central WifiManager Software User Manual Central WifiManager Configuration On this page we can view and configure settings that are related
44. Steering Refuse Number 0 10 Page 51 Central WifiManager Configuration D Link Central WifiManager Software User Manual Central WifiManager Configuration Upload Configuration After clicking on Uploading Configuration in the left panel the following page will be available On this page we can view and configure the configuration file upload schedule or initiate the upload of the configuration file to all access points in this network manually In the Schedule Settings section the following parameters can be configured Parameter Description 5 2014 07 01 14 02 E OTEC Run Select this option to manually upload the configuration A Gs re a file to all the access points in this network manually Click Complete to initiate the upload Specify Time Select this option to configure the scheduled time for the E Headquarters Schedule Settings configuration upload to take place Selecting this option will lam a initiate the configuration upload every weekday specified at SSID ill the time specified continuously ae cote BO nme BALE Specify Date Select this option to configure the scheduled date for the Optimization E Seelam configuration upload to take place Selecting this option will aaan only initiate the configuration upload once on the date and Device seting i time specified fee ll saN n Date After selecting the Specify Date option select the date at Firmware Upgrade Neyt Run Time
45. Trap notice 2014 07 03 09 12 38 192 168 70 50 ss m V guration nor entity implementation ma 6 records current page 1 1 Copyright 2014 D Link Corporation Page 82 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking the ya button the following page will be available On this page we can configure the standard SNMP event and notice settings that will be used to display messages on the Standard page when that type of event has occurred on the network For a complete list of standard traps that are supported by this application refer to Appendix B Standard amp Private Trap List on page 105 In the Event tab the following parameters can be configured Parameter Description 2014 07 03 09 47 amp Sign Out admin Event To modify an existing standard trap select it in this Central a section After selecting an existing trap its parameters will D oo f C hed Monitor automatically be entered in the Event Settings section for Report gt Event Event amp Notice Settings ification new tr n ny event in Association aerial To create a new trap do not select any event cn E SNMP Version Select the SNMP version that will be used for this trap here RogueAP eee Options to choose from are SNMPv1 and SNMPv2c When syslog ColdStat modifying an existing trap this field cannot be changed Cs ars a
46. W I have read and accept the license terms Page 8 D Link Central WifiManager Software User Manual Software Installation Central WifiManager Server Installation The redistributable package will now be installed Click the Cancel button to stop and exit the installation Publishing product information Feature FT_VC_Redist_OpenMP_ 86 Microsoft Visual C 2008 Redistributable has been successfully installed It is highly recommended that you download and install the latest service packs and After the redistributable package was installed this window will appear In this sos or la inal window the user is reminded that there might be updates available for this For more information visit the following Web site redistributable package and that it is highly recommended to update it n p l Saar af eee Proudiect support Lenter Lt hae ALEPES EFE M BILLE ce O ma Me m mie ee Se Steed aie aia me ainat a a Click the link to find out if there are updates available for the redistributable package Click the Finish button to complete the redistributable package installation and continue to the next step of the Central WifiManager software installation Page 9 D Link Central WifiManager Software User Manual Software Installation Central WifiManager Server Installation After the Microsoft Visual C 2008 Redistributable was installed the Central WifiManager software installation will continue
47. able we can choose to display events based on the filtering criteria selected or we can choose to display all events generated To filter the events displayed in the table the following parameters can be configured Parameter Description Date Select the starting date by clicking in the first text box available and select the starting date from the option available Do the same for the ending date selection in the second text box Select the event level from the drop down list provided Options to choose from are all critic error warning and notice Node IP Enter the node s IP address here Keyword To display only entries that contain a certain keyword enter that keyword in this text box Event Level Click the a button to display only the entries based on the criteria entered Click the button to display all standard events that have taken place Click the button to create a new standard event and notice Click the 4 button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel Click the big a button to remove all entries from the event table Click the small button next to a specific entry to remove only that entry from the event table 5 2014 07 03 09 30 amp Sign Out admin 0 i System Monitor OS Configuration i D Central WifiManager Association
48. adquarters gt Server Room gt SSID and click the Save button to accept the changes made E Headquarters EETA E Server Room Access Control SSID User Authentication VLAN Authentication Type Each Configuration Only Allow One SSID to Use Passcode For Authentication Bandwidth r Pass Code List Optimization epics Pass Code Duration Device Limit Last Active Day Duration Remaining RF Optimization Device setting Uploading Configuration Firmware Upgrade Undefined AP White List After successfully modifying the SSID to use pass codes for user authentication the User Authentication entry column should display Passcode for the SR Guest entry Do re 2 a WiFiManager Home Configuration System Monitor Configuration Site gt Headquarters gt Server Room SSID Headquarters 5 E Server e Room SSID Band Security Access Control User Authentication Modify Delete SSID SR WiFi 2 4GHz WPA Personal Remote Radius o VLAN Sa SSID1 SR Guest 2 4GHz Open System Passcode A m Bandwidth Optimization Captive portal RF Optimization Device setting Uploading Configuration Firmware Upgrade Undefined AP Page 97 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access Access points in the network will not know about these new changes until the 2014 07 14 11 35 a
49. ally In the Choose Firmware section the following parameters can be configured Parameter Description 2014 07 01 14 04 EE Firmware File For every access point in this network we can specify the Central Way a firmware file that will be uploaded either manually or based D eee ange fe ved hed Tl on the schedule configured Click Browse to navigate to the Site Configuration gt Site gt Headquarters gt Server Room gt Fimware Upgrade firmware file located on the computer sii iid el tac E Server Module Name Version H W Version Current FW File Firmware File In the Schedule Settings section the following parameters can be configured n DAP 2330 1 01 A Browse Run Select this option to manually upload the firmware file to all Optimization the specified access points in this network manually Click nonin ae Complete to initiate the upload ene Pe ea Specify Time Select this option to configure the scheduled time for the Uploading Peace firmware upload to take place Selecting this option will Fimware Upgrade Date time 01 00 oo Y initiate the firmware upload every weekday specified at the Day Mon Tue wed C Thu JFri C Sat C Sun time specified continuously Specify Date Select this option to configure the scheduled date for the Run Status firmware upload to take place Selecting this option will onion Ort only initiate the firmware upload o
50. ameter Descri 0 tion CPL Ameer S E KOTE Band Select the wireless frequency band that will be used for this D Gem a ha re A WifiManager network here Options to choose from are 2 4G and 5G es a PE ate cee Index Select the SSID index that will be used fore this network Site Configuration gt Site gt Headquarters gt Server Room SSID here Options to choose from are Primary and SSID1 to E Headquarters EEREN S SID7 la r Wireless Settings P a a a a a n 2 4G Y SSID Enter the wireless network name for this network here This SSID e a is name is also called the SSID of the wireless network a SSID Visibility Select to Enable or Disable the wireless SSID visibility here Optimization SSID Visibility Enable v WMM Wi Fi Select to Enable or Disable the Wi Fi multimedia features sii WMM Wi Fi Multimedia Enable V Multimedia here oo li ce Security Select the wireless security that will be used by this wireless ee sana Demma Key Size TER network here Options to choose from are Open System aA Koy Type Key Index Shared Key WPA Personal WPA Enterprise WPA2 Kay Valua Personal WPA2 Enterprise WPA Auto Personal and WPA Auto Enterprise See ae ee MAC Address Action Disable No MAC Address Delete o In the following sections we ll discuss the wireless security options that are available to networks managed by this application User Authentication
51. anager ee Configuration System Monitor Site Configuration Site gt Headquarters gt Server Room VLAN Click the Save button to accept the changes made E Hesdquaters VANSE Gonan Ocnane IEEE E Server e a SSID VLAN VID VLAN Name Untag VLAN Ports Tag VLAN Ports Edit Delete Bandwidth Mgmt LAN1 LAN2 Primary 2 4G SSID1 2 4G SSI Optimization D2 2 4G SSID3 2 4G SSID4 2 4G SSID5 2 4G Captive portal 1 default SID6 2 4G SSID7 2 4G Primary 5G SSID1 5 EY o RF Optimization G SS1D2 5G SSID3 5G SSID4 5G SSID5 5G S Device setting ID6 5G SSID7 5G Uploading Configuration Firmware Upgrade Undefined AP Copyright 2014 D Link Corporation Page 43 D Link Central WifiManager Software User Manual After clicking on VLAN in the left panel the following page will be available On this page we can view create and configure Virtual LANs VLANs that will be managed by the access point in this network In the VLAN List tab a list of created VLANs will be displayed Click the Edit icon to modify an existing VLAN Click the Delete icon to remove an existing VLAN In the Port List tab a list of ports will be displayed These ports are all the ports that are available on the access points in the network In the columns next to the Port Name entries the VLAN ID number of the VLAN that the port belongs to will be displayed The column location of the number will indicate if the port is a tagged member Tag VID or an
52. atch manager profile Security Channel NO Watch Name Create Date Creator Modify Delete RogueAP SysLog E 1 WiFi Link Down 2014 07 03 10 39 32 admin E Monitor Manager Monitor List E Type Standard Private E Watch Watch Manager Watch List WiFiLink Down Copyright 2014 D Link Corporation Page 88 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create Watch After clicking the button the following page will be available On this page we can create a new watch manager profile The following parameters can be configured Parameter Description 2014 07 03 10 41 Sign Out admin Name Enter the watch manager profile s name here Dor an ay re a d Event List To add an event to the event list click on the Add button To ar a eee ae remove an event from the event list select it and click on the SNE Monitor Event Watch Manager gt Create Watch yyy Delete button soa A ane LAAT l Device List To add a device to the device list click on the Add button To rated remove a device from the device list select it and click on the bona Event List Ze Delete button SysLog Monitor Manager V Click the OK button to accept the changes made A ven SEENEN Click the Cancel button to discard the changes made and return to the main page zoo meine Standard Private E Watch Vv Watch Manager e ES Ca
53. c warning level The following parameters can be configured Parameter Description 2014 07 03 09 53 Sign Ouvadmin Warning Level Select the warning level here Options to choose from are Deis Cini tA re wz i Critical E W d Noti WiFiManager Mam ritical Error Warning and Notice ETE ie EN Send E Mail After the warning level was selected select this option to aa SS SS enable the email notification feature for the selected warning Association level _ ind a ing Level Notice Mail Setti n 5 ann aming Leve m NOUce Mall settings Recipient Enter the recipient s email address here eae as a mees Sender Enter the sender s email address here Syslog Error Recipient Subject Enter the subject for the message here O waning m Message Type Select the message type here Options to choose from are aii rene Subject n onitor Lis Event Level Event Date Time Device Target and Event Message Type Event Level Event DateTime Notice Type Device Targert Event Notice Remark Enter the remark for this message here iii ae i Private E Watch i Watch Manager Click the Apply button to accept the changes made Parm Click the OK button to accept the changes made i Click the Cancel button to discard the changes made and return to the main page Copyright 2014 D Link Corporation Page 84 D Link Central Wi
54. console port protocol that will be used on all ae onsale Sohings i 7 i Bandwidth access points in this network Options to choose from are Optimization Status 7 Enable Telnet and SSH cite Console Protocol Telnet SSH Time Out Select the active console session time out value here DODAN annat Options to choose from are 1 Min 3 Mins 5 Mins 10 Mins Uploading i Configuration 2 4GHz 15 Mins and Never Firmware Upgrade L Data Rate Auto CIRTS Length 256 2346 2346 Click the Save button to accept the changes made aS aaae ue C Fragment Length 256 2346 2346 il CI DTIM 1 15 1 C wireless On Cl 11N Channel Width Auto 20 40 MHz Copyright 2014 D Link Corporation Page 50 D Link Central WifiManager Software User Manual In the 2 4GHz and 5GHz sections the following parameters can be configured Parameter Description Data Rate Select the wireless data rate that will be given the highest priority here This rate is between 1 and 54 Mbps Select Auto to allow the access point to determine the best rate RTS Length Enter the RTS length value here This value must be between 256 and 2346 By default this value is 2346 Beacon Interval Enter the beacon interval value here This value must be between 40 and 500 By default this value is 100 Fragment Length Enter the fragment length value here This value must be between 256 and 2346 By default this value is 2346 DTIM Enter the DTIM valu
55. displayed with the basic information about them Copyright 2014 D Link Corporation Page 20 D Link Central WifiManager Software User Manual Central WifiManager Configuration Device View On this page a list of configured sites will be displayed For more information on how to create or configure sites refer to Create Site on page 25 For this example we created a site called Headquarters and within the site we created a network called Server Room For more information on how to create or configure networks refer to Create Network on page 28 In the Device View tab a list of access points will be displayed that was associated 2014 07 01 16 55 amp Sign Outiadmin with the Headquarters site More information about the access points will be Dio A it ri displayed in the table columns To view more detailed information about a specific EeeManager eee Nn aa access point click on the IP address of that access point T Home gt Site Device View En on A ay E Headquarters Server e eoe naa hi paoa eae Se a Click the icon to remove an access point from this network Room Headquarters 07 01 16 54 53 192 168 70 50 C4A81D90CDB amp 8 DAP 2330 1 01 2 Headquarters 0 0 11 100 07 01 16 54 53 192 168 70 51 C0A0BB48D450 DAP 2660 1 05 3 Headquarters 0 0 11 108 07 01 16 54 52 192 168 70 52 COA0BB48D400 DAP 2660 1 05 o Copyright 2014 D Link Corp
56. e changes made and return to the main page Page 41 D Link Central WifiManager Software User Manual Central WifiManager Configuration After creating a new SSID it will be displayed in the table In this example we 2014 07 01 13 49 Sign Out admin created an SSID called SR WiFi D Central ok A ey e WifiManager Home Configuration System Click the button to add another new SSID Site Configuration gt Site gt Headquarters gt Server Room SSID Click the E icon to modify an existing SSID p Click the icon to delete an existing SSID Room SSID VLAN Bandwidth Optimization Primary SR WiFi 2 4GHz WPA Personal Disable D Captive portal RF Optimization Device setting Uploading Configuration Firmware Upgrade Undefined AP Copyright 2014 D Link Corporation Page 42 D Link Central WifiManager Software User Manual Central WifiManager Configuration VLAN After creating a network additional options will be available in the left panel These options include VLAN Bandwidth Optimization Captive Portal RF Optimization Device settings Uploading Configuration and Firmware Upgrade In the following sections we ll discuss these additional settings in more detail Before the tabs we can configure the following parameter m n 2014 07 01 13 51 Sign Out ad Parameter Description ina n Paan VLAN Status Select to Enable or Disable the VLAN feature here Doi an tA re WifiM
57. e here This value must be between 1 and 15 By default this value is 1 Wireless Select whether the wireless connectivity of access points in this network should be On or Off 11N Channel Width Select the 802 11n wireless channel width here Options to choose from are 20 MHz and Auto 20 40 MHz In the 5GHz section an additional Auto 20 40 80 MHz option is available for selection In the 5GHz section the following additional parameters can be configured Parameter Description Band Steering Age Enter the band steering age value here This value must be between 0 and 600 By default this value is 180 Band Steering Enter the band steering difference value here This value Difference must be between 0 and 32 By default this value is 2 Band Steering Enter the band steering refuse number here This value must Refuse Number be between 0 and 10 By default this value is 3 Device Settings 2 4GHz SGHz LJ Data Rate iv LI RTS Length 256 2346 L Beacon Interval 40 500 L Fragment Length 256 2346 C DTIM 1 15 L Wireless y C 11N Channel Width iv 2 4GHz 5GHz L Data Rate iv LI RTS Length 256 2346 L Beacon Interval 40 500 C Fragment Length 256 2346 C DTIM 1 15 _ Wireless iv C 11N Channel Width v r LI Band Steering Band Steering Age 0 600 Band Steering Difference 0 32 Band
58. e networks and also assign member accounts to each network The following parameters can be configured Parameter Description 2014 07 01 12 23 amp Sign Outvadmin Network Name Enter the new network s name here This name can be up to Dior A QA re a ii 50 characters lon anager o EE eE eee a Home Configuration System Monitor About Network Member Select the member accounts that will be added to this Site eT network in the left box and click gt gt to add them to the E Headquarters ret Te Selected list in the right box To remove a member account from the selected list select it and click lt lt to remove the ae gre account A A Click the OK button to create the new network on Vv Vv COK Copyright 2014 D Link Corporation Page 28 D Link Central WifiManager Software User Manual Central WifiManager Configuration 5 2014 07 01 12 24 Q Sign Out admin After creating a new network it will be displayed in the Network List table In this example we created a network called Server Room D Central it ri WifiManager Configuration System Monitor Click the button to add another network Site Configuration Site Headquarters f i E Headquarters Click the E icon to modify an existing network Seve i m i i oom r Network List Click the icon to delete an existing network Seer ee SR BPC TE REPAS erat ene pea Click the E icon to download the da
59. e setting Uploading Configuration Firmware Upgrade Undefined AP Copyright 2014 D Link Corporation Page 48 D Link Central WifiManager Software User Manual Central WifiManager Configuration Bandwidth optimization After clicking on Bandwidth optimization in the left panel the following page will be available On this page we can view and optimize the Radio Frequency RF used on the access points in this network The following parameters can be configured Enable Auto RF Select this option to enable the RF optimization feature Central A A Init Auto RF Click the Auto RF Optimize button to manually initiate the D iiianoe fe Z hed Task automatic RF optimization feature The AP will automatically Site Goigain Ste Headquarters Sara Roos RF Opik select the best channel E Headquarters Enable Auto RF Z Auto Init Select this option to run the RF optimization feature oe a Init Auto RF Auto RF Optimize periodically based on the period entered After the initiation SSID Auto Init o period has expired the AP will automatically select the best iai magie a aa channel ohana RSSI Thresold 40 Vv Auto Init Period After enabling the Auto Init option enter the automatic aiaia a N O a initiation period value in hours here aa ol RSSI Threshold Select the RSSI threshold value for this network here This Uploading value is between 10 and 100 in increments of 10 a aia The AP will adjust its channel
60. el and Event gt Watch gt Watch List gt WiFi Link Down in the left panel the following page will be displayed On this page we can view watch list messages that were generated based on the watch manager profile s settings 5 2014 07 03 10 44 amp Sign Out admin 0 i System Monitor About fr ao Configuration D Central WifiManager Association date 2014 07 03 2014 07 03 eventlevet a M node IP keyword q a Security Channel O if RogueAP on SysLog NO Event Name Event Type S DAP 2330wlan a a m Private critic 2014 07 01 15 05 10 192 168 70 50 i Monitor Manager fLinkDown D a DAP 2660wlani Monitor List E Private critic 2014 07 01 15 43 44 192 168 70 51 i fLinkDown DAP 2660wlan E Type m l Private critic 2014 07 01 16 52 23 192 168 70 52 i fLinkDown Standard E DAP 2330wlani Private z i Private critic 2014 07 03 09 12 51 192 168 70 50 o fLinkDown E Watch DAP 2660wlanI 7 po a Watch Manager Js u Private critic 2014 07 03 09 12 59 192 168 70 51 E Watch List os DAP 2660wlan 5 Private critic 2014 07 03 09 12 59 192 168 70 52 o WiFi Link Down fLinkDown 6 records current page 1 1 Copyright 2014 D Link Corporation Page 92 D Link Central WifiManager Software User Manual To create or configure standard SNMP event and notice settings refer to Standard on page 82 To create or configure p
61. entral WifiManager Software User Manual After clicking the Add button next to the Device List parameter the following window will appear In the All Device section all available access points in the network managed by this application will be displayed To use one or more of these devices select them and click on the gt gt button add them to the Selected Devices section To remove one or more of the selected devices from the Selected Devices section select them and click on the lt lt button Click the OK button to accept the selections made Click the Cancel button to discard the selections made and return to the previous page D Central WifiManager Report Association Security Channel RogueAP SysLog Monitor Manager Monitor List Type Standard Private E Watch Watch Manager E Watch List WiFi Link Down Page 91 i Central WifiManager Configuration Create Watch wa i Configuration System Monitor gt Event gt Watch Manager gt Create Watch 5 2014 07 03 10 43 amp Sign Out admin Go o Monitor About Name Device Maximum Length 50 characters Event lig o 192 168 70 50 192 168 70 51 192 168 70 52 4 y i p Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual To filter the messages displayed in this table the following parameters can be configured Parameter Descript
62. er the email address that will be associated with this user account here Resume Enter a more detailed description for this user account here Click the OK button to create the user account Click the Reset button to clear the information entered in the fields of this form Click the Cancel button to discard the changes made and return to the main page Central WifiManager Configuration Create User Account 5 2014 07 01 17 28 E Out admin About o ran Monitor Central an re D WifiManager Configuration Settings System gt User Manager UserName System Maximum Length 64 characters Password Root Admin Privilege E mail Resume Maximum Length 50 characters OK Reset Cancel Copyright 2014 D Link Corporation Page 63 D Link Central WifiManager Software User Manual Central WifiManager Configuration By Access Point After clicking on Monitor in the top panel and Association in the left panel the following page will be displayed On this page we can view a report of all the access points and wireless clients managed by this application Three association reports can be generated By Access Point By Wireless Station and By Station Number On this page a report was generated By Access Point This report can be refined by 2014 07 01 17 32 Sign Out admin selecting the Group S
63. ere For example cn is used for Windows Server Identity Enter the name of the administrator here For example cn Administrator cn users dc test dc com means for Windows Server if the administrator is a member of wireless client it is also a member of the group users in the domain test com Alternatively select the Auto Copy option to automatically generate and insert the name of the administrator here based on the Base DN and Account Attribute strings entered Page 39 D Link Central WifiManager Software User Manual After selecting POP3 as the Authentication Type we can configure access points to use an additional POP3 server to handle user authentication in this network The following parameters can be configured Server Enter the POPS server s IP address here Port Enter the POP3 server s port number used here By default this port number is 110 For the SSL TLS connection type this value is 995 by default Connection Type Select the POP3 connection type here Options to choose from are None and SSL TLS After selecting Passcode as the Authentication Type we can view the following section In this table configured front desk user accounts that have been assigned to this network and have already generated a pass code from the Web login page will be displayed For more information about creating or configuring user accounts refer to Create User Account on page 63 For more information about front desk user accounts
64. etype pazzword InstallShield i os oes ee ee iamar Central Y an PTY Gil rh Check whether the C runtime installed YE runtime was not detected immediately installed Installshield D Link Central WifiManager Software User Manual Software Installation Central WifiManager Server Installation In this window a welcome message will be displayed to inform the user that the Microsoft Visual C 2008 Redistributable will be installed Click the Next gt button to continue to the next step D a E aaa a Click the Cancel button to stop and exit the installation This wizard will guide you through the installation process Be sure to carefully read and understand all the rights and restrictions described in the license terms You must accept the license terms before you can install the software MICROSOFT SOFTWARE LICENSE TERMS sa a ane en r IAG4 AND X64 SERVICE 7 E In this window the license terms of the redistributable package will be displayed These license terms are an agreement between Microsoft Corporation or based on Read through the terms print if needed and select the I have read and accept the ee ee license terms check box to continue with the installation eme to any Microsoft Click the lt Back button to return to the previous step Click the Install gt button to continue to the next step Press the Page Down key to see more text Click the Cancel button to stop and exit the installation
65. fiManager Configuration Monitor List CELA E Out admin After clicking the gt button the monitor manager event will run and real time updates will be displayed in the chart Di tt Oo System Monitor In this chart we monitor the transmitted data of the 2 4GHz frequency band of the SoSo setae lane access point with the IP address of 192 168 70 50 at 30 second intervals using ig gt a E3 SNMPv2c and the public string Channel RogueAP Selected Profile gt Access Point 1status Running Click the button to export this chart This chart will be exported as an image file UM with the file format of PNG Monitor Manager cic Monitor List Access Point 1 Click the button to export the contents displayed in this table to the computer Event accessing this interface This export supports the following file format PNG T Standard Private E Watch Watch Manager Watch List Copyright 2014 D Link Corporation Page 81 D Link Central WifiManager Software User Manual Central WifiManager Configuration Standard After clicking on Monitor in the top panel and Event gt Type gt Standard in the left panel the following page will be displayed On this page we can view standard event type messages generated based on the Event amp Notice Settings configuration A standard event is an event that can occur on all devices managed by the Central WifiManager Server application In the t
66. fiManager Software User Manual Private Central WifiManager Configuration After clicking on Monitor in the top panel and Event gt Type gt Private in the left panel the following page will be displayed On this page we can view private event type messages generated based on the Event amp Notice Settings configuration A private event is an event that can only occur on specific devices that are managed by the Central WifiManager Server application These events are product specific For a complete list of private traps that are supported by this application refer to Appendix B Standard amp Private Trap List on page 105 In the table we can choose to display events based on the filtering criteria selected or we can choose to display all events generated To filter the events displayed in the table the following parameters can be configured Parameter Description Date Select the starting date by clicking in the first text box available and select the starting date from the option available Do the same for the ending date selection in the second text box Select the event level from the drop down list provided Options to choose from are all critic error warning and notice Node IP Enter the node s IP address here Keyword To display only entries that contain a certain keyword enter that keyword in this text box Event Level Click the a button to display only the entries based on the criteria entered Clic
67. following i Central parameters can be configured D a an a ri Parameter Description Soh med System Monitor Username Enter the front desk staff account s username here Password Enter the front desk staff account s password here u UserN oe Maxi Length 64 charact Privilege Select the Front Desk Staff option here Maximum Length 64 characters E mail Enter the front desk staff person s email address here Password Resume Enter additional information about this account here Privilege Front Desk Staff E mail Click the OK button to create the new account Resume Click the Reset button to clear out the information entered in the fields Maximum Length 50 characters OK Reset J Cancel Page 95 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access After successfully adding the front desk staff account it will be displayed in the user 2014 07 14 10 11 Sign Ouvadmin manager table Gane A D WifiManager A ws 0 ab Configuration System Monitor About Settings System gt User Manager User Manager All Users 2 Root Admin 1 Root User 0 Local Admin 0 Local User 0 Front Desk Staff 1 User List i UserName Privilege CreateDate Resume Action admin Root Admin 2012 08 03 03 34 46 default user Additional resume information placed O
68. g on Monitor in the top panel and SysLog in the left panel the following page will be displayed On this page we can view system log entries generated by events that occurred on the network and events that occurred on the Central WifiManager Server application Click the E3 button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel Report D Central WifiManager ee Configuration a System 5 2014 07 01 17 50 Q amp Sign Outadmin Go Monitor Channel RogueAP SysLog at ol Monitor Manager Monitor List Ee a Type Standard Private E Watch Watch Manager Watch List 2014 07 01 15 05 02 2014 07 01 15 05 10 2014 07 01 15 06 48 2014 07 01 15 06 48 2014 07 01 15 06 48 2014 07 01 15 06 48 2014 07 01 15 06 48 2014 07 01 15 27 01 2014 07 01 15 43 30 2014 07 01 15 43 38 2014 07 01 15 43 44 2014 07 01 16 49 44 2014 07 01 16 52 09 2014 07 01 16 52 17 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 50 192 168 70 51 192 168 70 51 192 168 70 51 192 168 70 51 192 168 70 52 192 168 70 52 AirPremier SW Controller C4 A8 1D 90 CD B8 Wireless Initiate Wireless athO succes s C4 A8 1D 90 CD B8 Wireless Initiate Wireless ath0 succes s C4 A8 1D 90 CD B8 Wireless A
69. h Manager E Watch List SSID Count L Copyright 2014 D Link Corporation Page 67 D Link Central WifiManager Software User Manual On this page a List report was generated displaying all the SSIDs hosted by the access points managed by this application This report can be refined by selecting the Group Type Site in the first drop down menu and then selecting the network in the second drop down menu Click the button to regenerate this report Information like SSID Module Name MAC Address IP Address Authentication Encryption Security Level Band and HW Version is displayed for each SSID Click the 4 button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel D Central WiFfiManager Report Channel RogueAP SysLog Monitor Manager Monitor List a Type Standard Private E Watch Watch Manager E Watch List Page 68 en ea N eRe ee w Configuration SSID Module Name MAC Address SR WiFi dlink SR WiFi SR WIFi dlink DAP 2660 DAP 2660 DAP 2330 DAP 2660 DAP 2660 COAOBB48D400 COA0BB48D400 C4A81D90CDB8 COA0BB48D450 COA0BB48D450 Central WifiManager Configuration 5 2014 07 01 17 38 Q Sign Outadmin TN System Monitor About GroupType Site JAll Groups PA ar IP Address 192 168 70 52 192 168 70 52 1
70. he SNMP version that will be used for this trap here ie Options to choose from are SNMPv1 and SNMPv2c When SysLog E modifying an existing trap this field cannot be changed eee Event Name Enter the event s name here This name will be used to acs identify the event in the table mentioned before Trap Generic Select the generic trap that will be used for this new EI Type trap here Options to choose from are Coldstart 0 a WarmStart 1 LinkDown 2 LinkUp 3 E Watch AuthenticationFailure 4 EgpNeighborLoss 5 and ee EnterpriseSpecific 6 When modifying an existing trap this field cannot be changed Status Select to Enable or Disable this specific trap here OID Enter the Object Identifier OID number for this trap here When modifying an existing trap this field cannot be changed Description Enter the trap s description here Level Select the level for this trap here Options to choose from are Critical Error Warning and Notice Click the New button create a new trap event Click the Save button to accept the changes made Click the Delete button to delete the selected trap Click the OK button to accept the changes made Click the Cancel button to discard the changes made and return to the main page Page 86 Event StandardTrap Private DAP 2330deAuthentication DAP 2330stationDisassocNotify DAP 2330stationAssocNotify DAP 2330wlanifLinkDown DAP 2330webLogoutSuccessful DAP 2330bcFlood DA
71. ick test start checking Software Installation overy Set IP Set Groupinto Action Status Advanced OK Cancel E o o r IP Address MAC Address NetMask SNMP Reset OK Set Groupinto FY Version Action _ 192 168 70 51 DAP 2660 192 168 70 52 DAP 2660 _ 192 168 70 50 DAP 2330 Page 18 A 4 A COA0BB48D450 COAS0BB48D400 C4481 D90CDBS 255 255 255 0 255 255 255 0 255 255 255 0 1 05 1 05 1 01 Enable Enable Enable Config Group Info D Link Central WifiManager Software User Manual Central WifiManager Configuration Central WifiManager Configuration In this section we ll discuss the Central WifiManager client application After the installation was completed the following applications will be available J D Link J Central WifiManager 2 Central WifiManager Server Central WifiManager Click the Central WifiManager option to open the client application The Central WifiManager uses a secure HTTPS connection to the Central WifiManager Server By default this application will open the default Web browser and connect the to localhost which is the local means of connecting to the same PC s own IP address lt Certificate information needed gt Alternatively from a remote computer we can connect to the Central WifiManager Server by entering the IP address of the computer that has the server application installed into the web browser
72. ig WPA Personal 100 OFF Copyright 2014 D Link Corporation Page 64 D Link Central WifiManager Software User Manual On this page a report was generated By Wireless Station This report can be refined by selecting the date and time From and To and then selecting the Type either By MAC Address or By Alias and also additionally entering Key Words in the text box provided Click the amp button to regenerate this report In the table a list of wireless client connections connected to the access points managed by this application will be displayed Information like Date Time MAC Address Alias IP Address SSID Band Authentication RSSI and Power Save Mode is displayed for each wireless client Click the 4 button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel D Central WifiManager Monitor gt Report gt Association Pract Report Channel RogueAP SysLog Monitor Manager Monitor List pe E Type Standard Private E Watch Watch Manager E Watch List Page 65 Central WifiManager Configuration By Wireless Station l sah Configuration By Wireless Station a System By Station Number 5 2014 07 01 17 34 Q Sign Outadmin _ Monitor About DateTime 2014 07 01 17 32 24 2014 07 01 17 32 09 2014 07 01 17 31 58 2014
73. ination location Click the lt Back button to return to the previous step Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation Page 5 Welcome to the InstallShield Wizard for Central Wwihkl anager The InstallShield Wizard will install Central Wii anager on your computer To continue click Next Gea Goes i percha OF Ler tral Pee im Choose Destination Location Select folder where setup will install files Setup will install Central WitiManager in the following folder To install to this folder click Next To install to a different folder click Browse and select another folder Destination Folder E Pragrane Files eSB WD Linek ential Winarna InstallShield Software Installation D Link Central WifiManager Software User Manual Central WifiManager Server Installation In this window we need to enter the IP address for the Central WifiManager in the Central WifiManager Server space provided This is normally the IP address of the 7 PC being used for the installation Central Wifitanager Server IP antral Withdan ees Central Witivianager Click the lt Back button to return to the previous step Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation Central With anager Server IP Central With anager Server InstallShield In this window we can view or modif
74. ion Date Select the starting date by clicking in the first text box available and select the starting date from the option available Do the same for the ending date selection in the second text box Select the event level from the drop down list provided Options to choose from are all critic error warning and notice Node IP Enter the node s IP address here Keyword To display only entries that contain a certain keyword enter that keyword in this text box Event Level Click the Q button to display only the entries based on the criteria entered Click the an button to display all private events that have taken place Click the button to create a new event and notice Click the 4 button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel Click the big a button to remove all entries from the event table Click the small button next to a specific entry to remove only that entry from the event table Central WifiManager Configuration Watch List After creating watch manager profiles in the previous section those profiles will be available for selection under the Watch List option in the left panel In this example we created a watch manager profile called WiFi Link Down that will generate events when an access point in this network s wireless link goes down After clicking on Monitor in the top pan
75. ite from the first drop down menu and also then selecting the Dc ok re 0O network in the second drop down menu anager gt a Configuration System Monitor About Report Monitor gt Report gt Association Click the button t te thi rt Associaton IC e p u on O regenera e IS repo 5 si By Access Point By Wireless Station By Station Number cu 7 i Channel Group Site All Groups on In the Access Point table the list of access points managed by this application RogueAP i will be displayed Information like the Module Name MAC Address Channel IP is are Address and HW Version is displayed for each access point oo Matita List C DAP 2330 C4A81D90CDB8 6l 192 168 70 50 A In the Station Detail table the list of wireless clients connected to the access points C o o l a TaS O DAP 2660 C0A0BB48D400 11 108 192 168 70 52 A managed by this application will be displayed Information like Date Time MAC ceap Address Alias IP Address SSID Band Authentication RSSI and Power Save aa Mode is displayed for each wireless client E Watch Watch Manager E Watch List i 3 total 1 1 P Click the button to export the contents displayed in these tables to the computer PE i z r Station Detail accessing this interface This export supports the following file formats TXT PDF EET TC AERE Sa ERG EI as cane oe TE SET eae eure esa lA epee ace and Excel 2014 07 01 17 3 Primary S 73 002191809574 192 168 70 50 aS dott
76. k Options to choose from are First Second Third and Fourth Key Value Enter the open system WEP encryption key here based on the selections made Central WifiManager Configuration Create SSID Basic Settings Wireless Settings Band Index SSID SSID Visibility WMM Wi Fi Multimedia Security AG Primary V i Open System v Key Settings Encryption Key Type Key Value Disable Key Size Key Index Basic Settings Wireless Settings Band Index SSID SSID Visibility WMM Wi Fi Multimedia Security AG Primary V r Enable v Enable v Shared Key v Key Settings Encryption Key Type Key Value Key Size Key Index Page 32 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create SSID After selecting the WPA Personal option as the wireless security method the following parameters are available for configuration inti Parameter Descri e tion Wireless Setting N Cipher Type Select the WPA cipher type here Options to choose from are a Auto AES and TKIP anah Pimary V Group Key Update Enter the WPA group key update interval value here By ene J Interval default this value is 3600 SSID Visibility Enable v Pass Phrase Enter the secret pass phrase used here a i a Sl Security WPA Personal v WAP Settings
77. k the button to display all private events that have taken place Click the 7 button to create a new private event and notice Click the _ button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel Click the big a button to remove all entries from the event table Click the small button next to a specific entry to remove only that entry from the event table D Central WifiManager Report i Monitor gt Event ope Configuration 4 t System 5 2014 07 03 09 54 amp Sign Out admin Monitor About Association Security Channel RogueAP SysLog Monitor Manager Monitor List E Type Standard Private E Watch Watch Manager E Watch List Page 85 date 2014 07 03 2014 07 03 event level all wv inode IP keyword aa oO DAP 2330wianl fLinkUp DAP 2330wlanl fLinkDown DAP 2330wianl fLinkUp DAP 2330statio nAssocNotify DAP 2330statio nDisassocNotif y DAP 2660wlanl fLinkUp DAP 2660wlanI fLinkUp DAP 2660wianl fLinkDown DAP 2660wlanl fLinkUp DAP 2660wianl fLinkUp DAP 2660wlan fLinkUp Event Name Event Type Private Private Private Private Private Private Private Private Private Private Private critic critic 2014 07 01 15 05 02 2014 07 01 15 05 10 2014 07 01 15 0
78. l address here B E a 7 nem Sender Enter the sender s email address here Syslog Error Recipient Subject Enter the subject for the message here warns Sender Message Type Select the message type here Options to choose from are img lt Subject Event Level Event Date Time Device Target and Event Message Type ee Event DateTime Noti ce Type Device Targert Event Notice Remark Enter the remark for this message here any A rivate E Watch Watch Manager Click the Apply button to accept the changes made E Watch List Click the OK button to accept the changes made E Click the Cancel button to discard the changes made and return to the main page Copyright 2014 D Link Corporation Page 87 D Link Central WifiManager Software User Manual Central WifiManager Configuration Watch Manager After clicking on Monitor in the top panel and Event gt Watch gt Watch Manager in the left panel the following page will be displayed On this page we can view create and configure watch manager profiles Existing watch manager profiles are displayed in the table on this page 2014 07 03 10 40 amp Sign Ouvvadmin Central T D WifiManager A a ab Configuration System Monitor Click the button to create a new watch manager profile Click the F icon to modify an existing watch manager profile LE Mortor Event Watcn Manager Association Click the icon to delete an existing w
79. less frequency band that will be used in this rule here Options to choose from are 2 4Ghz and 5GHz SSID Select which SSID will be used in this rule here Options to choose from are Primary SSID and SSID1 to SSID7 Uplink Bandwidth Rule Type Downlink Speed Enter the downlink speed value that will be assigned to either each station or to the specified SSID here This value can either be in Mbits sec or Kbits sec Uplink Speed Enter the uplink speed value that will be assigned to either each station or to the specified SSID here This value can either be in Mbits sec or Kbits sec Click the Add button to add the new rule to the list of Bandwidth Optimization Rules CARER amp Sign Outadmin Diss 2 Q amp 0 WiFfiManager P amex Home Configuration Monitor About Site Configuration gt Site gt Headquarters gt Server Room Bandwidth Optimization E Headquarters Enable Bandwidth Optimization Enable v E Server Room Downlink Bandwidth 54 Mbits sec SSID er Uplink Bandwidth 54 Mbits sec Bandwidth Add Bandwidth Optimization Rule Oparizakon Rule Type Allocate average BW for each station v Captive portal v RF Optimization RONE Device setting SSID Primary SSID v Uploading Downlink Speed 26 Mbits sec Vv Configuration Firmware Upgrade Uplink Speed 26 Mbits sec base cca r Bandwidth Optimization Rules a a Downin Speed _ upink Speed Jmoaty _
80. ll be displayed in the Network List table In this example our network E Headquarters is called Server Room Click the E button next to the entry to modify this network i Network List Network Name Admin Member Creator Creat Date Modify Delete Export Server Room admin admin 2014 07 01 12 23 01 YF tf F Page 99 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access 5 2014 07 14 11 42 Q amp Sign Outadmin After clicking the E button the following page will be available The front desk staff user account will now be available and can be add to this network by selecting it and Dit i clicking on the gt gt button to move the account over to the Selected column Configuration System Monitor About Site Configuration Site gt Create Site Click the OK button to accept the changes made site Name eee Max cnar numeris 50 front w A v v 5 2014 07 14 11 42 Q Sign Out admin Click the OK button to accept the changes made Central TA D WifiManager a okey 5 i After this upload the configuration files to the access points in the network again i i i onfiguration System Monitor Refer to the steps discussed earlier on how to do this me Sean area a Headquarters Site Name Headquarters Max char number is 50 front N front v v OK Page 100 D Link Central WifiManager Software User Manual Now we can log
81. m a central point System Requirements For the best results the following minimum requirements are recommended on the computer used to run the Central WifiManager Server application e Hardware o gt CPU Intel Core i5 3 2GHz o RAM 4Gb DDR3 o HDD Space 2 Terrabytes o Display Card Windows Graphics Card Installed Gigabit Network Adapter e Operating System o Microsoft Windows XP SP2 o Microsoft Windows Vista o Microsoft Windows 7 Ultimate Enterprise x86 x64 o Microsoft Windows Server 2008 R2 with SP2 x64 o Microsoft Windows Server 2012 R2 x64 o Mac OS X 10 5 6 Page 3 D Link Central WifiManager Software User Manual Software Installation Software Installation In the following section we ll discuss the software that needs to be installed and used to successfully run the Central WifiManager application The following software applications must be installed in order e The Central WifiManager Server application This is the main application that will be responsible for day to day wireless network management and maintenance For more information refer to Central WifiManager Server Installation on page 5 and Central WifiManager Configuration on page 19 e The Access Point Module software for all access points that will be used in the Central WifiManager Server application Every access point has its own access point module software that can be installed on the computer that hosts the
82. mp Sign Outvadmin configuration of the relevant access points have been updated To manually update Dio A rok re a the configuration of the relevant access points navigate to Configuration in the top WifiManager y iz im a rt fe 1 a a ome onnguration menu and your network link in the left menu The network in this example is Server SN ET Room E amp E Headquarters r Schedule Settings 5 mia Run Select the Upload Configuration option in the left menu In the Schedule Settings SSID Claas section select the Run option and click the Complete button npn Bandwidth Date 20740709 Time 10 59 4 00 Optimization a EEEN Day Mon Tue Wed V Thu Fri _ Sat C Sun RF Optimization Device setting Run Status Uploading Configuration Off On Off Firmware Upgrade Neyt Run Time N A Status Complete Result Progress The configuration will now be uploaded to the relevant access points as displayed in 2014 07 14 11 36 amp Sign Outvadmin the Run Status section Central le D WifiManager ab Home Configuration Monitor Site Configuration Site gt Headquarters gt Server Room gt Uploading Configuration E Headquarters r Schedule Settings E a e Run SSID Specify Time VLAN O Specify Day ae Date Poyalura1a Time 14 35 10 Captive portal Day Mon Tue Wed _ Thu Fri Sat _ Sun RF Optimization Device setting r Run Status Uploading Configuration Off On
83. n the Database tab the following page will be available On this page we can view and configure how this application backs up or restores the database information and at what time intervals this should take place In the Database tab there are two sub tab pages called General and Backup In the General sub tab the following parameters can be configured 5 2014 07 01 17 01 amp Sign Out admin Central T D WifiManager 1 w5 0 an Configuration System Monitor About Parameter Description Enable Auto Backup Select this option to enable the automatic backup feature of the application s database Auto backup interval Enter the automatic backup interval time in days here By ad C Settings System gt Settings time default this value is 7 days To remove the old database backed up information after the new database was successfully backed up select the The old data will be Genera PO removed once the auto backup process begins option Backgournd data will increate when run here you set auto backup and clear to prevent data too big to effect system stablilty and enter the pending days value in the text box By default r Y Enable Auto Backup this value is 7 days p i i i Auto backup interval time 7 Days Data backup In this field the path to the backup directory will be displayed nl ee d l rector for refe rence Data backup directory Server APP_DATA D Link Click the O
84. nce on the date and time Next Run Time specified s Date After selecting the Specify Date option select the date at paa which the upload will be initiated Time After selecting the Specify Time or the Specify Date option select the time at which the upload will be initiated Day After selecting the Specify Time option select the day s on which the upload will be initiated Click the Complete button to accept the changes made or to manually initiate the Page 53 D Link Central WifiManager Software User Manual Central WifiManager Configuration Firmware Upgrade In the Run Status section the following parameters can be configured Parameter Description CE 14 05 amp Sign Out admin Off On Toggle this option to On to enable the scheduled firmware Dion A re A T fi ff WiFiManager e upload configured Toggle this option to Off to disable the ae Configuration System Monitor scheduled upload To reconfigure the schedule settings this Site Configuration Site gt Headquarters gt Server Room gt Firmware Upgrade option must be turned off Headquarters Choose Firmware hag e Module Name Version H W Version Current FW File Firmware File u a oom After the first upload the Next Run Time field will display when the next upload will e DAP 2330 1 01 A J Browse take place After every upload the Result hyperlink will be made available for review VLAN Optimization Captive portal r
85. ncel WiFi Link Down Copyright 2014 D Link Corporation Page 89 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create Watch After clicking the Add button next to the Event List parameter the following window 2014 07 03 10 42 amp Sign Out admin will appear Central A D WifiManager az 0 ib Configuration System Monitor About In the All Event section all available trap events will be displayed sal adie ca aera EEEE Association r Name Maxi Length 50 characters To use one or more of these events select them and click on the gt gt button add them Security nai Channel y to the Selected Event section initio Event eer To remove one or more of the selected events from the Selected Events section SysLog select them and click on the lt lt button Monitor O ColdStar Monitor Manager sere A Monitor List LinkUp Click the OK button to accept the selections made a ANE Click the Cancel button to discard the selections made and return to the previous E Type Warmstari SNMPv2 Standard LinkDown SNMPv2 page LinkUp SNMPv2 Private AuthenticationF ailure SNMPv2 Watch anne T Watch Manager _ DAP 2330stationDisassocNotiy Watch List DAP 2330stationAssocNotify wevinkoom SA 2SWanmkDow E DAP 2330bcFlood DAP 2330disassociateAttack se Ec Copyright 2014 D Link Corporation Page 90 D Link C
86. nd Automatically start server when O configuration window is open Select these options if needed penmi b E i E a e A Central WifiMan After this there server can be started by click either the start icon or being selecting Settings Start in the Server menu option M Automatically open configuration window when Windows start up i i i i 7 i Iv A icall h fi i indow i NOTE When clicking the close icon on the far upper right corner this application Aoa will close and exit The server will not be running in the background Click the minimize icon to close this window and allow the server application to run in the backg round f 2014 7 01 10 06 47 Syslog Server Start success 2014 7 01 10 06 47 FTF Server online 2014 7 01 10 06 47 SrmpTrap receiver initialize successtully When the server is up and running the left circle icon at the far bottom right corner will display green When the server is not running the right circle icon at the far bottom right corner will display red To view log entries about the System FTP Connectivity Live Access Points Data Transmissions and Automatic Configurations tabs at the bottom of the Message section can be selected CommLog FtpLog APLiveLog DataRetreshLog AutoConfigLog Central WifiManager Server is online Page 14 Software Installation D Link Central WifiManager Software User Manual Access Point Installation Tool Software Installation The Access
87. nfigure user accounts There are five kinds of user accounts that can be created to access the Central WifiManager Server application In the User List section a list of user accounts will be displayed 2014 07 09 17 04 Q Sign Outiadmin Central TT D WifiManager E z i Click the button to add a new user account aE Seen Monitor Click the F icon to modify an existing user account ci sia fam i a User Manager Click the icon to delete an existing user account All Users 2 Root Admin 1 Root User 0 Local Admin 0 Local User 0 Front Desk Staff User List EE UserName Privilege CreateDate Resume Action admin Root Admin 2012 08 03 03 34 46 default user E E front Front Desk Staff 2014 07 08 10 55 50 Ey m 2 total 1 1 Page Copyright 2014 D Link Corporation Page 62 D Link Central WifiManager Software User Manual After clicking the icon the following page will be available On this page we can configure the following parameters Parameter Description Username Enter the username for the new user account here This name must be between 4 and 64 characters long Password Enter the password for the new user account here This assword must be between 4 and 64 characters long Privilege Select the privilege level that this user account will have Options to choose from are Root Admin Root User Local Admin Local User and Front Desk Staff E mail Ent
88. nitor About T E Configuration D Central WiFiManager System Settings eara o TEE EEEa Advanced Riis Time Settings System Settings Set Timeout 5 Second Reboot Time 50 Second Configuration Update Time 60 Second Factory Reset Time 60 Second FW Download Time 80 Second FW Flash update Time 300 Second Timing Tolerance Time Second Copyright 2014 D Link Corporation Page 60 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on the SMTP tab the following page will be available On this page we can view and configure the Simple Mail Transfer Protocol SMTP settings In the Configure Server Settings section the following parameters can be configured Parameter Description 2014 07 01 17 03 amp Sign Outadmin Mail Server __Enter the SMTP servers IP address or domain name here p Jia A okay re a ri Port Enter the SMTP server s port number here By default this ee abi ica net o valueis 25 Settings System gt Settings i i ion i User M Encryption If applicable select the SMTP connection s encryption User Manager AAEE gt method here Options available are SSL and TSL Click Connect to test if the mail server settings are correct Configure Server Settings Mail Server
89. nitor Manager ae _ _ _ event C4A81D8CF1F4 G ss880_24 qqaqq E Type O new 1 000326603540 G Josh 2660 Standard O new 1 1CAFF78B3D72 G dlink elin test Private C new 1 00055E807001 G Maurus El Watch wish mi O new 1 00055E807002 G RaMa E Watch List C new 1 00055E807000 G Rabanus O new 2 78542E2EDF51 G Guest168 O new 4 DOAEECC5BE88 G TEW 752 2 4G 2 C new 4 1C7EE58EF8D2 G test1 Siena O new 3 DOAA1234563C G jamesg O new 6 0090A9A56745 N 24GGGGG new 6 C0A0BB492520 G A _Free_P1 O new 6 COA0BB492480 G A_Free_P1 O new 6 0090A9A5A62B N WesternDigital_Kevin x ok S cancer Page 73 Copyright 2014 D Link Corporation D Link Central WifiManager Software User Manual Central WifiManager Configuration Rogue AP 5 2014 07 10 10 11 Q amp Sign Outadmin In the Rogue AP tab we can view a list of access points in the environment that have been detected by access points in our network and were classified as rogue access D Central ok ae points WiFfiManager a Configuration System Monitor Report Monitor gt Report gt RogueAP Click the E button to scan for unclassified access points within the range of the access points connected to our network T RogueAP Click the 2 button to export the contents displayed in this table to the computer site alo ener ase accessing this interface This export supports the following file formats TXT PDF Monitor Manager and Excel Monitor Li
90. nterprise option as the wireless security method the following parameters are available for configuration Security WPA2 Personal v WAP Settings Cipher Type Group Key Update Interval PassPhrase Radius Server Port fez Cipher Type Select the WPA2 cipher type here Options to choose from ii are Auto AES and TKIP Rete Group Key Update Enter the WPA2 group key update interval value here By ne Interval default this value is 3600 RADIUS Server Enter the RADIUS server s IP address here apie ee Port Enter the RADIUS server s port number used here By Sit UP Eepee 17 default this port number is 1812 WAP Settings RADIUS Secret Enter the RADIUS secret pass phrase used here menor fe i eae PassPhrase O O Radius Server Doo O O Port Radius Secret Page 34 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create SSID After selecting the WPA Auto Personal option as the wireless security method the following parameters are available for configuration Parameter Description eee eee Cipher Type Select the WPA WPA2 cipher type here Options to choose as from are Auto AES and TKIP ae Group Key Update Enter the WPA WPA2 group key update interval value here in J Interval By default this value is 3600 SOn Pass Phrase Enter the secret pass phrase used here EE ETT PEE Security W
91. o after clicking on the Site option in the left panel Dic rok re the list of configured sites will be displayed in the Site List table on the main page WikiManager sl 5 2014 07 01 12 07 amp Sign Out admin T Configuration System Monitor Site Configuration Site Click the button to add a new site Site List Admin Member Creator Creat Date Modify Delete Copyright 2014 D Link Corporation Page 24 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create Site After clicking the button to add a new site the following page will be available On this page users can create sites and also assign member accounts to each site The following parameters can be configured Parameter Description 5 2014 07 01 12 08 Sign Outadmin Site Name Enter the new site s name here This name can be up to 50 D chem a a characters long system Monitor About Site Member Select the member accounts that will be added to this site in Site Configuration Siis Create Site the left box and click gt gt to add them to the Selected list in i tar raters 0 the right box To remove a member account from the selected list select it and click lt lt to remove the account Serres A A l Click the OK button to create the new site Vv Vv OK Copyright 2014 D Link Corporation Page
92. ogue AP 70 DA ADO ae E eee ae eee enn ener eee 20 NO e 70 Site ence ree eer el jie acd ame a ea Senso amine eee Ria 21 Rogue ViN m re epcnc pateowatheacrastatcnctaceas dbstusiserinseccteorastraaat grace Sestawigy i asatapssiseat tates tusser 74 Device VIEW osoin se rete te cee spans aa FA Ai TE nicieni 21 Ad AA 75 Topology VIOQW occ cccccccccccceccececacecucucucucuaeaeaeaeaeaeaeusueucueueeaeaeaeaeaeaeaeaeaeeeueuaeaeaeneaes 22 Neighbor A arose ove pss a psecchusapesisceaidnsaccacideigac daedlacsysciaasestdcisiceiossdtineaisicutisasirsessteete 76 OT NOUN aces E a E 24 SYSLOG ccsccccccsecsecsessecsscssessessecsesscssessessessessessusssssestessessessesstesteasessessessesseesven Ti SHE cae ou peu amanman evans E E evens aban pecan a 24 Vo a 0 aonn 78 B 272 Be i ne eae eee ere E ee ae ene eer anne ene Ree 25 Monitor Manager ccsccsccsessecssessessecsecsecsessscssessessessessessesstsssessessessesseeseestesten 78 CEA 0 g OP 27 Create Profile 0 ooo 79 pS A ve RUE CI sane etan td tau cece sheets seeped erauanaeeetetmnoeesint oateenceatane ae Monilor Ec eater eee ere 80 ae ohare even pareve ab iresiomsa trae ose Ra GOLU san T a TE acento seg tected seater ceemecny saeco 82 BASSI tee a A a eee A gt TG oc A reeset ede eee eee tee 82 VLAN ace E E a ease eae 43 AI p e E E E E E EE E 82 PANAGAN IIIA nse ceca en ai Eia a aeaa p EVE Ol E eae ee eee eee 83 BING A A iereneneereeiar iis IG E cer cceertg terior cteeeeema aeece 84 RF Optimization 2
93. on ColdStart SNMPv1 ColdStart 0 The sending protocol entity has reinitialized indicating that the agent s configuration Notice nor entity implementation may be altered WarmStart SNMPv1 WarmStart 1 The sending protocol has reinitializing but neither the agent s configuration or the Notice protocol entity implementation has been altered In the following table a list of Private trap entries are displayed that can be used in this application Event Name SNMP Version OID Description Level DAP 2330deAuthentication SNMP v1 1 3 6 1 4 1 171 10 37 5 Description needed Critical 1 5 7 2 20 DAP 2330stationDisassocNotify SNMPv1 1 3 6 1 4 1 171 10 37 5 Description needed Critical 1 5 7 2 15 Page 105 D Link Central WifiManager Software User Manual Appendix B Standard amp Private Trap List Page 106
94. or power when after a scan it detected APs in the network with a lower RSSI than the threshold specified RF Report Frequency Enter the frequency value in seconds at which an RF report will be generated The AP might adjust its channel or power at the frequency specified Click the Save button to accept the changes made Copyright 2014 D Link Corporation Page 49 D Link Central WifiManager Software User Manual Central WifiManager Configuration Device Settings After clicking on Device Settings in the left panel the following page will be available On this page we can view and configure the login and accessibility settings for access points in this network Additionally some advanced wireless settings can be configured on this page for both the 2 4Ghz and 5Ghz frequency bands The following parameters can be configured Parameter Description 2014 07 01 14 00 amp Sign Out admin Username This field displays the username that is applied to all access Do A 45 re ib oints in this network Bo Home Configuration System Monitor About Password Enter the password that will be applied to all access points in z SEEE EEE EE E E EEEE this network here E Headquarters Anii Status Select this option to enable console port connectivity on all M a aaia a ena access points in the network SSID Console Protocol Select the
95. oration Page 21 D Link Central WifiManager Software User Manual Central WifiManager Configuration Topology View On this page all the devices connected to the specified site will be displayed visually The following items can be found on this page Tone Description 5 2014 07 01 16 55 amp Sign Out admin Add Topology On the top right of the viewing area there is a icon Click Central 0 A this icon to add a custom topology D WiFiManager fa eSEE kod Soe Edit Topology On the top right of the viewing area there is an i icon Click Dashboard Home gt Site this icon to modify the newly added topology s name Site Delete Topology On the right of the topology tabs there is an x icon Click B ij this icon to remove the custom topologies created The Room a ae all topology which is automatically generated cannot be deleted Map Size The map size of the topology view can be modified Enter the width and height of this view in the text boxes and click Submit to accept the changes made These values must be between 800 and 8000 Cursor select this option to select an item individually Guide Select this option to make the guides visible in the topology 2 Add Device Select this option to add access points that have been a associated with this site into the topology y Add Background Select this option to add a custom background image to the bz topology Image formats supported a
96. out of the administrative account and log back in with our front desk staff account Enter the front desk staff account s username and password in the spaces provided and click the Login button to enter the front desk staff account Page 101 Appendix A Front Desk Staff amp User Access D Link Building Networks for People Central WiFiManager User Name Password D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access After successfully logged in using the front desk staff account the following page will be available On this page we can generate a pass code for front desk users The following parameters can be configured SSID The network SSID will be displayed that front desk user can BD coats use to temporarily access the wireless network using the anager pass code that will be generated here Headquarters Frontdesk gt Headquarters gt Server Room gt Generate Pass Code Security Key A pass code can be manually entered here Leave this field E Server Room Ticket Settings blank to allow the system to generate a random pass code earning SSID Select the Display Security Key option to display the letter Security Key Display Security Key typed into this field Pass Code Quantity Pass Code Quantity Enter the amount of pass codes that will be generated here Duration Hours Normally we ll only generate one pass code La
97. re JPG JPEG GIF and PNG Pen Select this option to manually draw a connection line from one device to another After drawing the connection line it can be specified as either wired or wireless and the color and line thickness can be customized Copyright 2014 D Link Corporation Page 22 D Link Central WifiManager Software User Manual Central WifiManager Configuration Topology View Parameter Description Dra Select this option to enable the function to simply select and move the objects and the background of the topology into place Save Select this option to save the topology PC Null This icons illustrates the management PC where the Central WifiManager Server application is installed Access Points These icons illustrate the access points located at the site and there connection relation with each other Double click on any access point icon to view more detailed information about the selected access point Page 23 D Link Central WifiManager Software User Manual Central WifiManager Configuration On this page we can view create and configure logical sites and networks that are related to the physical locations of the wireless devices in the network Wireless devices at these sites can unanimously and effortless be managed and maintained through the use of this application Sites and networks that have already been configured will be displayed under the Site option on the left panel Als
98. reate a new monitor manager entry Conequaicn een Monitor Click the icon to modify an existing monitor manager entry LE Monior Monitor Monitor Manager Association Security Channel No Name Modify Delete RogueAP Ey Situ 1 Access Point 1 Click the icon to delete an existing monitor manager entry Ei Monitor Manager Monitor List Access Point 1 E Watch Watch Manager Watch List Copyright 2014 D Link Corporation Page 78 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create Profile After clicking on the add icon the following page will be available On this page we can create or configure a monitor manager watchdog entry In the Profile Settings section the following parameters can be configured Profile Name Enter the profile name here This name will be used to identify the entry in the list Click in the text box to view a list of access points associated with our network Select an entry and click OK to add it to this field SNMP Version This field will display the SNMP version that will be used for this entry By default the version is SNMPv2c Device IPv4 Address Public String Enter the public SNMP string name here By default this string is public Port Enter the port number that the SNMP agent will use to receive request messages By default this value is UDP port number 161 Timeout Enter the message timeout val
99. refer to Appendix A Front Desk Staff amp User Access on page 95 Central WifiManager Configuration Create SSID User Authentication Authentication Type POP3 y Each Configuration Only Allow One SSID to Use Passcode For Authentication User Authentication Authentication Type Each Configuration Only Allow One SSID to Use Passcode For Authentication r Pass Code List Pass Code Duration Device Limit Last Active Day Duration Remaining 7703 SR Guest 1 2 14 07 08 not active front ta Page 40 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create SSID In the White List section we can configure what network devices are allowed to connect to this network by specifying the MAC address of those network devices The following parameters can be configured Parameter Description eS a Enable White List Select this option to enable the white list feature Enable White List MAC Address Enter the MAC address of the networking device that will be MAC Address allowed to connect to this network here Click Add to then Unload White iste Browse add this MAC address to the white list table Upload White List To upload a white list file click Browse and navigate to the dee a File white list file saved on the computer and then click Upload Click the Save button to accept the changes made Click the Back button to discard th
100. rivate SNMP event and notice settings refer to Private on page 85 Watch List Association Security Channel RogueAP SysLog Monitor Manager Monitor List E Type Standard Private E Watch Watch Manager E Watch List WiF Link Down D Central an WifiManager Report Event gt Event amp Notice Settings Central WifiManager Configuration 5 2014 07 03 10 45 amp Sign Out admin a o a ae Configuration System Monitor Event o amp StandardTrap ColdStart WarmsStart LinkDown LinkUp AuthenticationFailure EgpNeighborLoss ColdStart SNMPv2 WarmStart SNMPv2 LinkDown SNMPv2 LinkUp SNMPv2 AuthenticationF ailure SNMPv2 EgpNeighborLoss SNMPv2 Enterprisespecific Private DAP 2330deAuthentication DAP 2330stationDisassocNotify DAP 2330stationAssocNotify DAP 2330wianlfLinkDown DAP 2330webLogoutSuccessful DAP 2330bcFlood Event Settings A SNMP Version SNMP V1 Event Name o o ooo Trap Generic Coldstart 0 Status O Disable Enable OID Description A v Level Critical v Copyright 2014 D Link Corporation Page 93 D Link Central WifiManager Software User Manual After clicking on About in the top panel the following page will be displayed On this page we can view the version number and copyright notice of the Central WifiManager Server application Central WifiManager Configuration 5 2014 07
101. ssociation Success STA 00 21 91 80 95 74 C4 A8 1D 90 CD B8 Wireless 4 way handshake start STA 0 0 21 91 80 95 74 C4 A8 1D 90 CD B8 Wireless 4 way handshake success S TA 00 21 91 80 95 74 C4 A8 1D 90 CD B8 Wireless Group key update start STA 00 21 91 80 95 74 C4 A8 1D 90 CD B8 Wireless Group key update success S TA 00 21 91 80 95 74 C4 A8 1D 90 CD B8 Wireless Received disassociate STA 0 0 21 91 80 95 74 reason 8 C0 A0 BB 48 D4 50 Wireless 2 4G Initiate Wireless succes s C0 A0 BB 48 D4 50 Wireless 5G Initiate Wireless success C0 A0 BB 48 D4 50 Wireless 2 4G Initiate Wireless succes s C0 A0 BB 48 D4 50 SYSACT Web login success from 192 168 70 4 C0 A0 BB 48 D4 00 Wireless 2 4G Initiate Wireless succes s C0 A0 BB 48 D4 00 Wireless 5G Initiate Wireless success Y EEDD A C O ee O E ee Copyright 2014 D Link Corporation Page 77 D Link Central WifiManager Software User Manual Central WifiManager Configuration Monitor Manager After clicking on Monitor in the top panel and Monitor Manager in the left panel the following page will be displayed On this page we can view create and configure monitoring watchdog entries to specifically monitor certain events that take place on certain devices On this page a list of monitor manager watchdog entries are displayed 5 2014 07 01 17 59 E Outadmin Central T i D WifiManager A a lt 0 db Click the button to c
102. st eet E Type Standard Private E Watch Watch Manager E Watch List Copyright 2014 D Link Corporation Page 74 D Link Central WifiManager Software User Manual In the Valid AP tab we can view a list of access points in the environment that have been detected by access points in our network and were classified as valid access points Click the E button to scan for unclassified access points within the range of the access points connected to our network Click the T button to export the contents displayed in this table to the computer accessing this interface This export supports the following file formats TXT PDF and Excel Central WifiManager Configuration Valid AP 5 2014 07 10 10 12 Q amp Sign Outadmin Central D WifiManager A z i Configuration System Monitor Report Monitor gt Report gt RogueAP ee Me it Channel 3 Seems Maceo Valid AP BEET malas RogueAP SysLog Channel BSSID Model SSID 6 C4A81D90CDB8 G SR WiFi Monitor Manager 11 COA0BB48D450 G SR WiFi Monitor List 6 C4A81D90CDB9 N SR Guest Evet 11 C0A0BB48D451 B SR Guest E Type Standard Private El Watch Watch Manager amp Watch List Copyright 2014 D Link Corporation Page 75 D Link Central WifiManager Software User Manual Central WifiManager Configuration Neighbor AP 5 2014 07 10 10 12 Q Sign Outadmin ah tb Configuration System Monitor About In the Neighbor AP tab we can view a
103. st Active Day 2014 07 14 Duration Enter the duration for this wireless connection here This Device Limit value must be in hours Last Active Day Select the last active date that this code can be used here Device Limit Enter the device limit value here This is the maximum amount of active users that can use this pass code Click the Generate button to generate the new pass code Page 102 D Link Central WifiManager Software User Manual After clicking on the View Edit Delete option in the left menu we can view the list of pass codes that was generated Also the Duration Remaining and Status fields are displayed here that are useful for front desk staff to monitor active and passive connections Click the E icon to modify an existing entry Click the icon to delete an existing entry Pass codes can now be given to front desk users by front desk staff To generate new codes front desk staff simply login to the Central WifiManager Server application using the front desk staff user account details enter the relevant ticket pass code information and click on the Generate button to get a code and give the code to the front desk user Based on the Duration time specified the ticket will expire and the entry can be removed Appendix A Front Desk Staff amp User Access 5 2014 07 14 11 46 Q Sign Out front D Central WifiManager Headquarters Frontdesk gt Headquarters gt Server Room View E Server Room Genera
104. st be between 1 aaa 3MT 08 00 Beijing Chongqing Hong Kong Urumg x and 10 By default this value is 5 Connection Settings Live packet interval In the AP List Packet Settings section select the live packet Access Address 192 168 70 3 ONS amp IP Need to restart server when you change time interval time here Options to choose from are Auto 2 5 10 Listen Port eoo 20 and 30 Service Port 64768 Time Zone In the Time Zone Settings section select the correct time zone option here Access Address In the Connection Settings section enter the Central WifiManager Server application s IP address here Listen Port In the Connection Settings section enter the Central WifiManager Server application s listen port number here By default this value is 8090 Service Port In the Connection Settings section enter the Central WifiManager Server application s service port number here By default this value is 64768 Page 56 D Link Central WifiManager Software User Manual Central WifiManager Configuration In the Module tab a list of access point modules will be displayed in the Module Name section Every different model of access point that will be managed by the Central WifiManager Server application requires the administrator to install the executable module file for that specific access point s model name For example on this page we have two kinds of access point modules installed the 2014 07 01 16 59 Sign Out
105. ta file of this network that can be uploaded to Server Room admin admin 2014 07 01 12 23 01 YP 6 PF an access point to quickly configure an access point to identify with this network For more information about how to upload the network data file to an access point for seamless network association refer to Access Point Installation Tool on page 15 Copyright 2014 D Link Corporation Page 29 D Link Central WifiManager Software User Manual Central WifiManager Configuration After clicking on the network link called Server Room in the left panel a feature rich 2014 07 01 13 32 Sign Outadmin configuration page is available where users can manually configure settings that will Do nA re be applied to all access points available in the network selected On this page we can WiFiManager om n ls now create a wireless network profile called SSID Site Configuration Site gt Headquarters gt Server Room SSID Headquarters cy Server Click the button to add a new SSID oe SSID VLAN Bandwidth Optimization Captive portal RF Optimization Device setting Uploading Configuration Firmware Upgrade Undefined AP Copyright 2014 D Link Corporation Page 30 D Link Central WifiManager Software User Manual Central WifiManager Configuration Create SSID After adding a new SSID the following page will be available In the Basic Settings section we can configure the following Par
106. te Pass Code View Edit Delete Pass Code List Duration Device Limit Last Active Day Duration Remaining 5437 SR Guest 1 1 14 07 14 not active front be E m Page 103 D Link Central WifiManager Software User Manual Appendix A Front Desk Staff amp User Access Front desk users simply connect to the wireless network available and when trying to connect to the network or Internet using their Web browser users will be asked to enter the pass code After entering the correct code supplied by front desk staff front desk users can connect to the network or Internet for the duration of the ticket Company Logo passcode Sat Page 104 D Link Central WifiManager Software User Manual Appendix B Standard amp Private Trap List Appendix B Standard amp Private Trap List The Central WifiManager Server application uses a specific list of SNMP standard and private traps Standard trap entries can be used in this application globally however every access point that was added into this application supports a very specific list of private trap entries that can only be configured and used for the specific access point s model name In this appendix we ll list out all the standard and private trap list entries that can be viewed and configured in this application In the following table a list of Standard trap entries are displayed that can be used in this application SNMP Version Generic Trap Descripti
107. teense nee neteeecenenneenteneensentenstnntentensensensenstenn 49 PIV Ee ates EA E E A E E E 85 PEVCE R UI capiani a oe Ee gsc E cheerareeteeae 86 Upload Configuration ssssssssssssssrsrrrsnnsssennrnnnnnnnnnntttnnnnnnnn tennen nennen enne 52 NOICE ee E E ee E 87 Te aai a a OA cece cect teste pacers E sts tescdeentenysege thieeseectt 88 Undeined AP oorsien akea n aE ARNa aaka daraa aait 55 Watch Manager NOEN E E EES 88 System E EEE E A E A E E EN N E E E A EA T 56 Create WAtCH oooccooooooocooooooooooooo ooo 89 Settings EE sce veatenaaaetnecwoceae eae E teu eereneneuaiaee neaes E A EET A E 56 VV os aia SOOO 92 EU iinet A A A meee OEE o E E EN 94 WIOGUUIG EEN SA A EE NR N E E TE TE 5 l PD AVA AS e A E E EA EEEE 53 Appendix A Front Desk Staff amp User ACCESS rrsreesrrrrrrrreenrrnntrerennnnnteenenns 95 POVO 1 ap SR ec Oe RO E ee OD 60 Appendix B Standard amp Private Trap List cc ceeceseeeeseeeeeeeeeeeeeeeeeeeseeeeeaees 105 OMTE ace space cst ies so cence cere sige sep sae bee AE RE 61 doer WIA ACO iresantcivpiia cts E E E ON 62 Create User Account sriccccncencnncecedacewcedendae eines denncriesiasesaeneeasseeesdateneieatadeneenneeeces 63 KONTOT eea e OEE EE E ER E E 64 D Link Central WifiManager Software User Manual Product Overview Product Overview The D Link Central WifiManager is a versatile convenient software solution for administrators to manage wireless devices throughout the network fro
108. to the system functionality of the Central WifiManager application In the following sections we will discuss these settings in more detail After clicking on System in the top panel and Settings in the left panel the following page will be displayed On this page there are five tabs with various settings that can be configured They are General Module Database Advance and SMTP In the General tab the following parameters can be configured Parameter Description 2014 07 01 16 58 Sign Out admin Save Your Login In the Login Settings section select this option to choose Central QA a Settings whether the login session should be remembered or not D WiFiMonager i ed bod be After selecting the None option the user will be prompt to Settings Sysien gt Settings login every time a connection to the Web User Interface Web Ul is made After selecting the 1 week option the user session will be kept open for one week During this time the ina user will not be asked to login again after the initial login was Save Your Login Settings None _Y max Online User Max Number is 10 made except if the user manually logged out ine Max Online User In the Login Settings section enter the maximum amount Live packet interval time Auto V Second of users that will be allowed to access the management Time Zone Setting interface at the same time This value mu
109. ubnets If any restricted subnets exist on the network that wireless should not be able to access enter those network addresses in the spaces provided Up to four different subnets can be restricted For example 192 168 0 0 16 Note that the CDIR notation is used to indicate the subnet mask of the subnet Users in the guest group will not be able to access these restricted subnets In the example the CDIR notation of 16 is used which is equivalent to the subnet mask of 255 255 0 0 This means that IP addresses from 192 168 0 0 to 192 168 255 255 will be restricted Username Enter the username that the wireless clients should use here Password Enter the password that the wireless clients should use here Group Select the group that the user account belongs to here Different groups will be have different access privileges given to the user account created here A list of configured user accounts will be displayed in the table Click the F icon to modify an existing account Click the icon to delete an existing account Central WifiManager Configuration Create SSID User Authentication Authentication Type Username Password v Each Configuration Only Allow One SSID to Use Passcode For Authentication r Local Settings IP Filter Settings Restricted Subnets example 192 168 0 0 16 2 Je al User Password Rule Settings Usermame Password E Group Manager y EE
110. ue here By default this value is 30 Interval Time s Enter the interval time value here By default this value is 30 seconds In the Monitor Items section the following parameters can be configured Monitor Item Click in this text box to view a list of monitor items available for selection Select a monitor item from the list Options available for selection are TransmittedByte 2 4G ReceivedByte 2 4G TransmittedByte 5G ReceivedByte 5G and CPUUtilization Select the data type here Options to choose from are Absolute and Relative Channel Name Enter the channel name here Unit String Enter the unit string here Scale Enter the scale value here Multiply Enter the multiply value here Data Type 5 2014 07 03 09 18 amp Sign Out admin D Central an WiFiManager About Report Monitor Monitor gt Monitor Add Association Security Profile Settings Channel Profile Name RogueAP SysLog Device IPv4 Address SNMP Version y Monitor Manager Monitor List Public string public Port 161 E Type Standard TimeOut 30 Private i Interval Time s 30 seconds iv E Watch Watch Manager Watch List Monitor Items Monitor Item Data Type Absolute wM Click the Submit button to accept the changes made Channel Name Unit string Scale Multiply Copyright 2014 D Link Corporation
111. vered select the check box next to it and click the Set IP button After clicking the Set IP button the following parameters can be configured IP Mode Select the IP mode for the access point here Options to IP Setting choose from are Static IP Address to manually configure J Pode Static IP Address z a __ sete set croupint the IP settings and Dynamic IP Address to allow a DHCP eenma DAPI a MAE server to automatically assign the IP settings to the access ieee ee ae oint _ 192 168 70 50 DAP 2330 A IP Address Enter the new IP address for the access point here at Sub Mask Enter the new subnet mask for the access point here DNS 192 168 70 1 Gateway Enter the gateway s IP address for the access point here ox Cancel DNS Enter the DNS address for the access point here 7 E User Name After clicking the Advanced button we can enter the login username of the access point here Password After clicking the Advanced button we can enter the login password of the access point here Authentication After clicking the Advanced button we can select the login authentication encryption method used Options to choose from are MD5 and HMD5 E Installation tool oge Static IP Address x Click the OK button to accept the changes made Paares WodeiNene Aw versdl Click the Cancel button to discard the changes made SEERNE iii v 192 168 0 50 DAP 2660 A _ 192 168 70 50 DAP 2330 A Sub Mask
112. y the Manager Listen and Service Port numbers Central WifiManager Central wifi Manager Port Setting Click the lt Back button to return to the previous step Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation Manager Port Listen Port Service Part InstallShield Page 6 D Link Central WifiManager Software User Manual Software Installation Central WifiManager Server Installation In this window we must enter the PostgreSQL password that will be associated with this application in the spaces provided Enter the same password in the Password and Retype password spaces provided Click the lt Back button to return to the previous step Click the Next gt button to continue to the next step Click the Cancel button to stop and exit the installation The installation of this application requires Microsoft Visual C 2008 Redistributable to be installed on this computer In this step the installation wizard will check if the redistributable is installed on this computer If found this step will be skipped If not found the option will be given to install the required redistributable Click the lt Back button to return to the previous step Click the Install button to continue to the next step Click the Cancel button to stop and exit the installation Page Password Please provide a password for service account postgres Password R
Download Pdf Manuals
Related Search
Related Contents
Distel User Manual - The GNU Conceptronic 3.5" Female Jack to 2x Male RCA eleve ingenieur maître iup geii de rouen ecole polytechnique de OM, DS160C, Husqvarna, DE, 2006-09 02-03 Honda Civic Si Service Manual Bedienungsanleitung User manual FL 240HV FLG - geo FUJI DL1000 ZOOM... bourré d`innovations PDFカタログ - オンウェーブ AmpliVox S1230 loudspeaker Copyright © All rights reserved.
Failed to retrieve file