User`s Manual
Contents
1. Rate 2400 4800 9600 or 19200 Transmission mode Sync or Async Channel Clock mode Internal oscillating clock 2 External clock Code package size 8 9 10 or 11 Loopback None or loopback Rate 2400 4800 9600 or 19200 Transmission mode Sync or Async Channel Clock mode Internal oscillating clock 3 External clock Code package size 8 9 10 or 11 Loopback None or loopback Rate 2400 4800 9600 or 19200 Transmission mode Sync or Async Channel Clock mode Internal oscillating clock 4 External clock Code package size 8 9 10 or 11 Loopback None or loopback Rate 2400 4800 9600 or 19200 Transmission mode Sync or Async Channel Clock mode Internal oscillating clock 5 External clock Code package size 8 9 10 or 11 Loopback None or loopback Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 7 The configuration setting and display message for Voice card FXSO When you enter the screen of ERM MUX and double click the voice card FXSO The voice card status screen will appear Picture2 15 Information displayed on voice card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Connecting type FXS or FXO Configuration2. External clock DCE DTE option DCE or DTE Timeslot 1 Four colors represent different status Yellow gt the card is occupied Channel Pink this timeslot is exclusively for unit 3 Red other card is occupied Green available Timeslot 2 Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 5 The configuration setting and display message for ASYNC card When you enter the screen of ERM MUX and double click the ASYNC card The ASYNC card status screen will appear Picture2 13 Information displayed on ASYNC card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Configuration setting for ASYNC card Parameters Value E1 card type ElAor EIB Clock mode Internal oscillating clock External clock Timeslot Four colors represent different status Channel aj Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available E1 card type ElAor EIB Clock mode
3. Connect Connect A Group Times and Clear All Timeslots Connection for options Press Timeslot Connect then the window will appear here Picture 2 xx Just choose the E1 port and timeslot and the system will automatically connect each other Times Connect X Times Connect 6 8 Connect to Connect To E1 fe Connect To Times 9 X Picture 2 xx Press Connect A Group Timeslots then the window will appear here Picture 2 xx Just choose the E1 port and timeslots range and the system will automatically connect each other The previous group connection will be replaced Group Times Connect Group of Times Connect Source E1 Eli Connect Times From ofp E Fa p T m Target E1 E1 Bbo H Connect Times From b H To T Connected Times will cleared OK O Cancel c Only for the ETU DXC setting you will find there are Save for save the setting and Clear for clear the setting and back to the default setting Section 10 Urgent alarm message If the alarm happens to any units under the system the alarm message box will appear here to tell the user Every happened alarm will be reported and recorded into the diary So the user may browser the diary and understand what happened Press the OK button then it will go back to the main screen Section 11 Connection Management For the better and more smooth to connec
4. Internal oscillating clock External clock Channel Timeslot 2 Four colors represent different status Yellow the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 6 The configuration setting and display message for X 50 card When you enter the screen of ERM MUX and double click the X 50 card The X 50 card status screen will appear Picture2 14 Information displayed on X 50 card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Configuration setting for X 50 card Parameters Value E1 card type ElAor EIB Stop bit 0 or 1 Loopback None or loopback Timeslot Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Rate 2400 4800 9600 or 19200 Transmission mode Sync or Async Channel Clock mode 1 Internal oscillating clock External clock Code package size 8 9 10 or 11 Loopback None or loopback
5. configuration setting and display message for Voice card E amp M When you enter the screen of ERM MUX and double click the voice card E amp M The voice card status screen will appear Picture2 16 Information displayed on voice card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Connecting type FXS or FXO Configuration setting for voice card Parameters Value E1 card type E1A or E1B Work mode Normal or hot line Channel Timeslot Four colors TEn er status ii Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available E1 card type E1A or E1B Loopback None or loopback Chanai Timeslot Four colors repren eens status D Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available E1 card type E1A or E1B Loopback None or loopback Channel Timeslot Four colors TEPSA oee status 5 Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red gt other card is occupied Green available Channel El card type E1A or E1B 4 Loopback None or loopback Timeslot Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Press Save the sett
6. this management system all require to connect with its own MODEM ETU NMC MODEM ETU DXC MODEM ETUO3 MUX Management Function The networking management offers Trapping management security management and configuration setting management gt Trapping Management It includes to locate all the problems and mistakes which occurred in whole network It consist of three steps Y Discover the problem v Separate the possible factors and find out the main cause v Fix the problem Within this function the administrator of the network can locate and fix the problem more quickly Diary offers the inquiry request and the calculation request and print out the report So the user can understand clearly all the dealing process including the time place and what unit went wrong gt Configuration Management The right position of unit is the major factor of running the system well or not The Configuration management include the whole process of the configuration setting Within this function it power the user to distribute the whole system The administrator can change the position of any units easily to match the system setting Configuration Management offers v To gain the message about any unit s correct position v To edit the system setting from the remote side v To store the data of setting also can maintain the latest list of whole system v To run the system more smoothly this manage
7. users to set the configurations by simply clicking the mouse instead of remembering the varied commands This NMP contains a lot of functions high security system easy to learn and operate This NMP also specialize in the trapping management Configuration management security management The NMP is available for the following models gt NMC gt ETU DXC gt ERM MUX gt ETU03 MUX Structuring drawing ETU NMC ETU DXC ETU03 MUX i 15 ER ETDE W eei Ea Cy aa H lalan PLETE k ETU03 MUX ERM MUX ETU03 MUX gt Level setting Management This NMP can set the different level for administration management In the other words the whole network can only has one top level first level user This way you may control the whole network The whole networking structure consists of three levels equipments of DXC or use the NMC as the first level use the DEX as the other two levels Just connects the PC terminal with the equipment through the LOG connections Then you may practice the management One thing needs to noticed is that if you want to use the multi levels management ensure that all the PC terminals have the same IP address This way you can make sure that all the data is synchronized For the multi levels networking management except the top leve
8. Bit Error gt 10 4 Bit Error gt 10 3 Bit Error 0 No loopback Local loopback Remote loopback Loopback from remote to local Remote recovery Remote alarm Pattern normal Pattern loss Bit Error gt 10 4 Bit Error gt 10 3 Bit Error 0 No loopback Local loopback Remote loopback Loopback from remote to local Remote recovery Remote alarm Alarm duration period XX Year XX Month XX Day XX Hour XX Min XX Sec XX Year XX Month XX Day XX Hour XX Min XX Sec The system will display all the message and store all the events into the diary So the user can read the diary to understand all the happened events On the pull down menu for Diary advanced find window will help you to find the event you need Picture2 7 Section 7 Enter managing system for ERM MUX On the main screen of the system choose and double click the unit icon of ERM MUx You will enter the managing status screen Picture2 8 After the system check the status of the ERM MUX the screen will display the detail of each slot If you double click the slot it will tell you the slot status You can also edit the configuration setting for the card Here the message box will ask you if you want to go back to the default values 1 The configuration setting and display message for E1 card When you enter the screen of ERM MUX and double click the E1 card The E1 card status screen will appear Picture2 9 Information dis
9. C admin Configures 20014F06 028 18 49 40 ETU DXC nm2 Configures 20014067F 028 18 38 30 ETU DXC Resum Normal 200146065 028 18 36 09 ETU DXC A Link disconnect 200146065 028 18 35 08 ETU DXC A Link disconnect 20014F065 028 18 32 27 ETU DXC A Link disconnect 20014F065 028 18 31 27 Resum Normal 20014F06 028 18 14 01 ETU DXC Normal 200146065020 18 14 01 ETU DXC B Loss Carrier 20014F065 028 18 13 66 ETU DXC To admin Configures 200106H 028 18 07 40 ETU DXC 4 Sync 20014F064 026 18 07 40 ETU DXC 4 Normal 20014F06 028 18 07 24 ETU DXC Sync 20014606 028 18 07 24 ETU DXC Normal 20014F065 028 18 07 24 ETU DXC B Loss Carrier 200146065 028 18 07 24 ETU DXC A 1 ErRate gt 10E 3 20014F065028 18 07 24 ETU DXC j a iSync o 20014F06 028 18 07 24 ETU DXC 1 Normal 200147065 028 18 05 30 ETU DXC admin Configures 200106A 02H 18 05 24 ETU DXC Turn On 200146065 028 18 05 24 ETU DXC Tum Off 20014F06 5 028 17 56 02 ETU DXC A Link disconnect 200146065 028 17 55 51 ETU DXC admin Configures gt 20014F06 5 02817 5453 ETU DXC admin Configures Alarm message display content format Parameters Display Message Details Unit status On line On line Off line Off line Module number 1 95144 Controlling module 2 LCD module 3 EIA module 4 EIB module S X 50 A module 6 Sync A module 7 X 50 B module 8 Sync B module 9 SRAM module Alarm message Recovery Recovery Alarm Alarm Sync Sync Async Async Pattern normal Pattern loss
10. Input the user name password and choose the type of the networking management in band or out band The default value for the user name is Admin for the password is none and for the networking management type is in band Suggest once you login the system change the password as your own password You can input up to 8 digits for the password Section 3 Change the password If you click change password at the login window you will go to the window of change password Input the old password and the new password for twice to confirm with the system Section 4 Configuration On the main menu of the networking management program choose the Serial Port Configuration Input the values as the picture shown below picture 2 1 Setting COM port xX Port Setting com o a BaudRate 600 v Check None tts i DataBit tts StopBit ff si OK Q Cancel C Picture 2 1 If the serial port doesn t response then the dialogue window will display picture2 2 Polling time is the system monitor every unit s status duration period including the alarm and the application If the polling duration is shorter that mean each unit will be polled more often But if the duration period is too short then system may get short So the suggest duration period is one to three seconds The default value for this is one second Setting Poll Time X Choice Setting Setting poll tim
11. Networking Management system Protocol User s Manual CIC CTC UNION TECHNOLOGIES CO LTD Content Introduce Chapter 1 Installation Section 1 Hardware Section 2 Software Section 3 How to install Chapter 2 How to start the system Section 1 Starting the system Section 2 Login the system Section 3 Change the password Section 4 Configuration 1 COM port configuration 2 Edit the polling time Section 5 Enter the system Section 6 Diary Section 7 Enter managing system for ERM MUX 1 The configuration setting and display message for E1 card The configuration setting and display message for Sub E1 card The configuration setting and display message for N 64K card The configuration setting and display message for 64K 128K card The configuration setting and display message for ASYNC card The configuration setting and display message for X 50 card The configuration setting and display message for Voice FXSO card The configuration setting and display message for Voice E amp M card eae ON Oo aa Section 8 Enter managing system for ETU03 Section 9 Enter managing system for ETU DXC Section 10 Urgent alarm message Section 11 Connection Management Section 12 Operator Management Section 13 Logout the system Introduce Environment The NMP Networking Management system Protocol is available for Windows95 98 2000 NT4 0 operating platform Features This NMP uses the graph icon display enables the network
12. Sub E1 card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Configuration setting for Sub E1 card Parameters Value E1 card type ElAor EIB Clock mode Internal oscillating clock External clock Loopback None or Remote Timeslot Four colors represent different status Channel A Yellow gt the card is occupied 1 a 2 Pink this timeslot is exclusively for unit Red other card is occupied Green available Pattern Normal or loss Sync Sync or Async E1 card type E1A or E1B Clock mode Internal oscillating clock External clock Loopback None or Remote Timeslot Four colors represent different status Channel Yellow the card is occupied 2 ii l Pink gt this timeslot is exclusively for unit Red other card is occupied Green available Pattern Normal or loss Sync Sync or Async E1 card type E1A or E1B Clock mode Internal oscillating clock External clock Loopback None or Remote Timeslot Four colors represent different status Channel ie Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Pattern Normal or loss Sync Sync or Async Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt
13. When you enter the screen of ERM MUX and double click the 64K 128K card The 64K 128K card status screen will appear Picture2 12 Information displayed on 64K 128K card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Configuration setting for 64K 128K card Parameters Value Channel 1 E1 card type ElAor EIB Clock mode Internal oscillating clock External clock DCE DTE option DCE or DTE Timeslot 1 Four colors represent different status Yellow gt the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Timeslot 2 Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Channel 2 E1 card type ElAor EIB Clock mode Internal oscillating clock External clock DCE DTE option DCE or DTE Timeslot 1 Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Timeslot 2 Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available E1 card type ElAor EIB Clock mode Internal oscillating clock
14. and X key to exit and abort the editing then you will return to the main screen 3 The configuration setting and display message for N 64K card When you enter the screen of ERM MUX and double click the N 64K card The N 64K card status screen will appear Picture2 11 Information displayed on N 64K card status window Parameters Value Slot Slot 2 Slot 11 Status Normal or Alarm Configuration setting for N 64K card Parameters Value E1 card type E1A Master E1 or E1B SlaveE1 DCE DTE option DCE or DTE Clock mode Internal oscillating clock end External clock 1 Timeslot Four colors represent different status Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available E1 card type E1A or E1B DCE DTE option DCE or DTE Clock mode Internal oscillating clock P RRE External clock 49 Timeslot Four colors represent different status Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 4 The configuration setting and display message for 64K 128K card
15. e C Default poll time Poll Time Poll Time ms 1000 OKO _ CanceiiGy Picture 2 2 Section 5 Enter the system When you first time enter the system the whole network structure is empty At the main menu of system choose the Edit the Network Picture 2 3 You can see the screen is divided into two parts On the left part of the screen they are the different model icon for modification When the user want to add the new unit just have to click on the unit icon and put it into the structure map on the right part The image size of the unit icon can be also modified Once the unit is added in here the window of Add new unit will appear Input the reference information for the new unit Picture 2 4 On the right part you may connect the units with the lines to form the network structure Under the Edit the Network command you may use the right mouse click the unit icon A message box will appear and you can set the status of each unit in the system Include the Rebuild and Delete functions You can also click the unit icon and drag it to the position you want in the structure map Click the Save the Network Structure then the window Picture2 4 will appear Set ETU DXC as the first level on the networking management system Picture2 5 The networking management type is local control With the Networking Management Center NMC PC terminal can manage ETU DXC ETU03 and ERM MU
16. ing or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen Section 8 Enter managing system for ETU03 On the main screen of the system choose and double click the unit icon of ETU03 You will enter the managing status screen Picture2 17 1 Click the E1 timeslots configuration and the detail window will appear Picture2 18 Sub E1 N 64A and N 64B may occupy as many timeslots as they need X 50A and X 50B may only occupy one timeslot The timeslot once is occupied by the module then it can t be occupied by the other one 2 Configuration setting for the N 64 and 64 128K card Section 9 Enter managing system for ETU DXC On the main screen of the system choose and double click the unit icon of ETU DXC You will enter the managing status screen Picture2 17 Including the front and rear panel ETU DXC Manager System DXC Port Number B Net Manager Mode Local Net Manager Net Manager Times bi Clock Resume Clock CH 13 16 1 Configurations setting for DXC LINE You may click any of the four connectors in the rear panel on the managing status screen of ETU DXC Another window will appear here Picture 2 18 ETU DXC Port information ETU DXC Port information LIN Local Step Out without L
17. l first level can manage the whole network The other two level users can only management the certain area gt IP Address In order to solve the routing problem all the equipments are managed under this network all have the same IP address The difference is this IP address here It is different from the common IP address You may check the table below to understand it The format A B c Type Address Range Meanings Sections A 00 00 Networking Management B 01 DXC Equipment C 02 33 CH1 LINE1 CH16 LINE32 33 Type 01 02 03 04 05 06 07 01 ERM MUX 02 ETUO3 03 ETU DXC 04 MANAGER 05 NMC 06 SUB E1 07 ERM DXC Administration Networking management system covers the in band and out band In band Networking Management The management signal is covered in one of the E1 timeslot It totally depend on the DDN itself Doesn t need the other channel for transmitting The bottom level the third level equipment drop one E1 timeslot message to the upper level equipment The upper level equipment will channelize the router and put all the collected data together in one E1 timeslot Then the message will keep going up to another level ERM MUX El El Out band Networking Management The management signal will go through the dial up line to the PSTN Under this every equipments under
18. ment also offers the switch between the auto and manual connection add in or delete gt Security Management The security management is to monitor the process of sending message This function offers the administrator to set different security level on management To avoid unnecessary damage on the network There are three levels for this function They are system administrator configuration administrator and the visitor On the system administrator level You can add in and delete the new network administrator edit the message Also can set the configurations check the status of any equipments This level is the top level in the security management Configuration administrator can only set the configurations and check the content of message Its level is lower than system administrator The visitor can only check the content of message Level of the visitor is the lowest Human design Platform The whole networking management uses the window amp pop out menu for display the status amp functions and mouse for operating This way the administrator can easy to operate and learn how to run the management system Chapter 1 Installation Section 1 Hardware 1 586PC PC586 Above Monitor Display pixel suggestion is 1024 X 768 Section 2 Software 1 Management software 2 Database software Section 3 How to install Networking management software is based on window operating such as Window NT amp Window 95 98 2000 Before
19. oop z Remote Step Out Step Out fH DB3 X Carrier Status Loss Carrier IDLE Code DISABLE ErCode Normal BNC RJ45 BNC Sensitivity 20aB v ENAB LE X CRC Check Step Out DISAB LE Z Disuse Times Free Times Used Times Current Times Clear The Line Tiems C Exit X Picture 2 xx Each port has four line there are totally 16 E1 ports in ETU DXC You can check the details for each E1 port on it E1 Timeslots list is consisted by the 2 lines amp 16 columns the colorful blocks Each block represents one timeslot So the first column on the first line will be the timeslot 00 The second column on the first line will be the timeslot 01 and so on The timeslot 00 can t be occupied here You can see in the timeslot 01 has xx xx The first xx means this timeslot connects to which E1 the other xx means this timeslot connects to which timeslot Four colors represent different status Yellow You may modify the connected timeslot Pink gt This timeslot is not available Red gt This E1 is occupied this timeslot Green This timeslot is available You may delete all the connections or modify the connections Simply click the clear all the connections button on the window of ETC DXC Port information Or you may modify the connections here just move to cursor to the block you want to modify and click the mouse The menu will appear you may have Timeslot
20. played on E1 card status window Message Value Card status Normal or Alarm Sync Sync or Async Pattern Normal or loss Bit Error Under the allowance lt 1 or gt 1 BNC RJ45 BNC or RJ45 Configuration setting for E1 card Parameters Value Remark Working mode Single E1 Double E1 Sub E1 or Two El in redundant way Clock mode Recovery clock Only when slot 6 inserts Internal oscillating clock with the Nx64 card or Sub clock 64K 128K card External clock Relay mode CCS or CAS CCS use timeslot 31 CAS use timeslot 30 can t use timeslot 16 CRC4 With CRC4 or without Loopback None Local Remote or loopback from remote to local Code HDB3 or AMI Idle Enable or disable Input impedance 20DB or 43DB RXZ Jitter Allow Enable or disable Tx amp Rx Tx or Rx Tx amp Rx and Length setting only under when allow in enable Length 128 or 32 Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 2 The configuration setting and display message for Sub E1 card When you enter the screen of ERM MUX and double click the Sub E1 card The Sub E1 card status screen will appear Picture2 10 Information displayed on
21. rce is only visible to you and can only be used on the current machine Cancet_ Help Picturel 1 Choose the user DSN on the database source administrator menu And click the add add and then you will go to the window of Create New Data Source Select Microsoft Access Driver mdb and click finish Picture 1 2 The window of ODBC Microsoft Access Setup will display here Input the file name as NetManager Click the select at the database and go the file called snmp mdb which its position is at D Snmp NewSnmp MDB snmp mdb Picture1 3 Click OK and the management software installation is successful New Data Source x Driver da Microsoft para arquivos texto txt cs v 4 Driver do Microsoft Access mdb 4 Driver do Microsoft dBase dbf 4 Driver do Microsoft Excell xls 4 Driver do Microsoft Paradox db 4 Driver para o Microsoft Visual FoxPro 6 Microsoft Acc 4 Microsoft Access T reiber mdb 4 Microsoft dBase Driver dbf 4 Mipracaft dR sso UEP Nrivar i dhl Fa Picturel 2 ODBC Microsoft Access Setup SUstenn Watevese Picture1 3 Chapter 2 How to Use Section 1 How to run the program If the installation is complete then click the start button on the bottom of the Window 95 98 2000 or Window NT screen Go to the Programs and click the Networking Management system Protocol Section 2 Login the system
22. setting for voice card Parameters Value E1 card type E1A or E1B Work mode Normal or hot line Loopback None or loopback Channel Timeslot Four colors represent different status 1 Yellow the card is occupied Pink this timeslot is exclusively for unit Red other card is occupied Green available E1 card type E1A or E1B Work mode Normal or hot line Loopback None or loopback Channel Timeslot Four colors represent different status 2 Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available E1 card type E1A or E1B Work mode Normal or hot line Loopback None or loopback Channel Timeslot Four colors represent different status 3 Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red gt other card is occupied Green available E1 card type E1A or E1B Work mode Normal or hot line Loopback None or loopback Channel Timeslot Four colors represent different status 4 Yellow gt the card is occupied Pink gt this timeslot is exclusively for unit Red other card is occupied Green available Press Save the setting or Alt and S key to save the setting and the message box will appear to tell you to wait the system to save Press Exit or Alt and X key to exit and abort the editing then you will return to the main screen 8 The
23. t every different modules between the different units The system offers the auto connect manual connect and auto delete 1 Auto connect On the main screen of the system choose the Connection Management at the menu bar Click the Auto connect then another window will appear Picture 2 xx Click the Auto connect on this window screen and system will start to connect automatically Section 12 Operator Management On the main screen of system choose the Operator at the menu bar The window of update user information will appear Picture 2 xx Update User information administrator administrator System Manager Configuration Manager Configuration Manager Net Manager Browse Browse Manager admin At window of update user information there are pull down menu for the command User and View You may add a new user delete or rename the current user on the list and check out the property of them under the pull down menu of User With the pull down menu of View you may sort of the current users Double click any user on the list display on this screen the window of user information will appear for modify User information admin pdministrator System Manager NetManager a System Manager E Section 12 Logout the system At the main screen choose the File at the menu bar You may either login with another iden
24. tification or you exit the system If you click the Exit the message box will appear Picture 2 xx Net Device Nanager System Press the OK will exit the system Press Cancel will go back to the system
25. xX Use the DB9 cable to connect PC terminal COM port with the RS 232 serial port Set the timeslot channels of the unit connect with NMC has to be the same as the NMC s Managing level is 2 and the type of networking management is remote The connected units on next layer will be on the managing level 3 The type of networking management is also remote Without the NMC PC terminal still can manage ETU DXC ETU03 and ERM MUxX Use the cross DB9 cable to connect PC terminal COM port with the local control port RS 232 DCE port on the ETU DXC The connected units on next layer will be on the managing level 2 The type of networking management is also remote The timeslot channels of the units connect with ETU DXC has to be the same as the ETU DXC When all the configuration settings are complete restart the system then you should be able to use all the functions from the system Section 6 Diary On the main menu bar click the Diary The Diary window will appear here Picture2 6 It can manage all happened events under the system Picture 2 6 Log L View Option Help Time DeviceName ModalType SlotNo _ AlarmLevel Operator Detaillnfo 20014F06 5048 11 15 01 ETU DXC admin Configures 200106H 04H 09 04 38 ETU DXC A Link disconnect 20014F06 5 04H 09 02 42 ETU DXC A Link disconnect 20014F06 5 028 19 11 49 ETU DX
26. you install the software please set the monitor displaying pixel to 1024 X 768 How to install the management software Insert the CD ROM go to the menu and execute the SETUP EXE It will start to install itself During the process it may indicate some failing message about the registration If the document in your disk is original please ignore it 1 ODBC The Configuration for Database When you start the networking management software at first time it will go to the window as the picture 3 3 and automatically configured itself If the configuration setting is failed then the system won t be able to run normally You need to do the setting manually Manually configure the database source Go to the control menu Double click the icon of the ODBC database to start the database source administrator Picture 1 1 ODBC Data Source Administrator 2 xi User DSN System DSN File DSN Drivers Tracing Connection Pooling About Name Driver dBASE Files Microsoft dBase Driver dbf dBase Files Word Microsoft dBase YFP Driver dbf Remove Excel Files Microsoft Excel Driver xls Fox Microsoft FoxPro YFP Driver dbf Configure Microsoft Access Driver mdb Visual FoxPro Database Microsoft Visual FoxPro Driver Visual FoxPro T ables Microsoft Visual FoxPro Driver User Data Sources a 4n ODBC User data source stores information about how to connect to the indicated data provider A User data sou
Download Pdf Manuals
Related Search