User Manual - Yamaha Downloads
Contents
1. press to set this unit in standby mode and disconnect the power supply cable from the wall outlet Condensation will form when the surrounding temperature changes suddenly Disconnect the power supply cable from the outlet then leave the unit alone e Install this unit near the wall outlet and where the AC power plug can be reached easily The batteries shall not be exposed to excessive heat such as sunshine fire or like Secure placement or installation is the owner s responsibility Yamaha shall not be liable for any accident caused by improper placement or installation of speakers Notes on remote controls and batteries Do not spill water or other liquids on the remote control Do not drop the remote control Do not leave or store the remote control in the following places places of high humidity such as near a bath places of high temperatures such as near a heater or a stove places of extremely low temperatures dusty places Do not expose the remote control sensor of this unit to direct sunlight or lighting such as inverted fluorescent lamps If the batteries grow old the effective operation range of the remote control decreases considerably If this happens replace the batteries with two new ones as soon as possible Do not use old batteries together with new ones Do not use different types of batteries such as alkaline and manganese batteries together Read the packaging2. the sound bar can be automatically turned off when it is not being used p 14 En En Part names and functions sound bar Sound bar front panel VOLUME 0 Y Z Indicators Indicate the status of the sound bar The indicators will dim automatically if no operations are performed for 5 seconds Refer to Operations p 8 to 9 for the main functions of the indicators mo STATUS TIV BD DVD COAXIAL ANALOG BLUETOOTH SURROUND DTS INPUT q m o Oo o o o o L Remote control sensor Receives infrared signals from the remote control of the sound bar p 8 TV s remote control sensor Receives infrared signals from the TV s remote control when the TV Remote Repeater function is enabled p 14 INPUT key Selects an input source to be played back VOLUME keys Adjust the volume p 8 C power key Turns on or off standby the sound bar p 9 HINT e The sound bar may automatically turn off when the auto power standby function is enabled p 14 Speakers Sound bar rear panel ANALOG TV BD DVD COAXIAL TV input jack For connecting to a TV with an optical cable p 6 BD DVD input jack For connecting to a playback device such as a Blu ray Disc BD player with an optical cable COAXIAL input jack For connecting an external device with a coaxial dig
3. 4 Weight 4 0 kg 8 8 Ibs Specifications are subject to change without notice ee A AIR SURROUND XTREME This system employs new technologies and algorithms that make it possible to achieve 7 1 channel surround sound with only front speakers and without using wall reflections UniVolume UniVolume is a trademark of Yamaha Corporation Bluetooth YAS 103 only Bluetooth is a registered trademark of the Bluetooth SIG and is used by Yamaha in accordance with a license agreement DOLBY DIGITAL Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories S dts Digital Surround For DTS patents see http patents dts com Manufactured under license from DTS Licensing Limited DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS Digital Surround is a trademark of DTS Inc DTS Inc All Rights Reserved Blu ray Disc Blu ray and the logos are trademarks of the Blu ray Disc Association The following description applies to YAS 103 only Bluetooth e Bluetooth is a technology for wireless communication between devices within an area of about 10 meters 33 ft employing the 2 4 GHz frequency band a band which can be used without a license Handling Bluetooth communications e The 2 4 GHz band used by Bluetooth compatible devices is a radio band shared by many types
4. ICES 3 B NMB 3 B CAUTION READ THIS BEFORE OPERATING YOUR UNIT To assure the finest performance please read this manual carefully Keep it in a safe place for future reference e Install this unit in a well ventilated cool dry clean place away from direct sunlight heat sources vibration dust moisture and or cold For proper ventilation allow the following minimum clearances Top 10 cm 4 in Rear 10 cm 4 in Sides 10 cm 4 in Locate this unit away from other electrical appliances motors or transformers to avoid humming sounds Do not expose this unit to sudden temperature changes from cold to hot and do not locate this unit in an environment with high humidity i e a room with a humidifier to prevent condensation inside this unit which may cause an electrical shock fire damage to this unit and or personal injury e Avoid installing this unit where foreign objects may fall onto this unit and or this unit may be exposed to liquid dripping or splashing On the top of this unit do not place Other components as they may cause damage and or discoloration on the surface of this unit Burning objects i e candles as they may cause fire damage to this unit and or personal injury Containers with liquid in them as they may fall and liquid may cause electrical shock to the user and or damage to this unit Do not cover this unit with a newspaper tablecloth curtain etc in order
5. IN T Step 4 1 E 5 Teach the sound bar the Volume code of the TV s remote control 5 1 Press VOLUME on the front panel of the sound bar INPUT VOLUME 0 S5 J 5 2 While pointing your TV s remote control at the remote control sensor hold down the volume key for more than 1 second twice or three times Result Bleep buzzer Indicators Aly ly Successfully o o E o o o cat o o learned EE r al n Lights up Failed to learn a Aea a aaa sl ale 7 Repeat from Twice ET ON UNE IN IN T T Step 5 1 Flash 6 Teach the sound bar the Volume code of the TV s remote control 6 1 Press VOLUME on the front panel of the sound bar INPUT VOLUME 0 Clearing all programmed functions 1 With the sound bar turned off hold down the LEARN key on the NS 6 2 While pointing your TV s remote control at the remote control sensor hold down the volume key for more than 1 second twice or three times Result Bleep buzzer Indicators ly ly Successfully o Oo SES D a D o e o o learned ae A SE S Lights up Failed to learn a JMe Sie SI Ue A Se Repeat from Twice INSO ANSO ANSO EINN INS IN T Step 6 1 Flash 7 Teach the sound bar the Power code of the TV s remote control 7 1 Press Q power on the front panel of the s
6. The TV cannot The remote control sensor of the Use the TV Remote Repeater function be controlled using the TV s remote control TV is blocked by the sound bar p 14 or remove the stands of the sound bar so that the TV s remote control sensor is not blocked p 5 There may be any problem with the TV or TV s remote control Refer to the manuals of the TV The TV cannot be controlled by using the TV Remote Repeater function The TV Remote Repeater function is disabled Enable the TV Remote Repeater function p 14 The sound bar does not learn TV s remote control operations The TV s remote control key was not held down long enough Hold down the key for more than 1 second twice or three times p 12 The TV s remote control does not use infrared signals Some remote controls may not work even if it uses infrared signals The TV s remote control learning function cannot be used in this case Use the sound bar s remote control to operate the sound bar The position where you operated the TV s remote control is not appropriate Operate the TV s remote control at the appropriate position p 12 The batteries of the TV s remote control are weak Replace with new batteries The remote control sensor of the sound bar is exposed to direct sunlight or strong lighting Adjust the lighting angle or reposition the sound bar The transmission of the
7. Use only with the cart stand cause interference harmful to the operation of other products distributed by Yamaha Corporation of may be of sufficient magnitude to tripod bracket or table electronic devices America or its subsidiaries specified by the manufacturer or sold with the apparatus LA When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug this apparatus during lightning storms or 3 when unused for long periods of time important operating and 14 Refer all servicing to qualified service personnel maintenance servicing Servicing is required when the apparatus has been instructions in the literature damaged in any way such as power supply cord or accompanying the appliance plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped constitute a risk of electric shock to persons This device complies with Part 15 of the FCC Rules and RSSGen of IC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation See the Troubleshooting section at the end of this manual if interference to radio reception is suspected FCC WARNING The exclamation point wit
8. amp YAMAHA Front Surround System YAS 103 YAS 93 Owner s Manual PDF versions of this manual can be downloaded from the following website http download yamaha com Contents Supplied items sssissssisscssssossisssssosscosssesisss cssssosssos sss snsssesseosss 2 POAUUINGS seissesivesicessicsssbasccssvessudecbensunssceuauaseebnieassceseucdeeizdecsasesecs Frequently asked Questions cccccccsssscsssccccsscscsscsseeee 3 Part names and functions sound bar ssccssccssssssreesee 4 5 6 DAS CAN ACION sods i cccccceicasscccisacsccescicesscdsancssosc seasessoustceesceeseesceceacee CONMNECHIONS ccccccccccccccccccccccccccccccccccceccscccccscccccccccccceccsccecs Analog connection of an external device game console sseescccseeeeeeees 7 Digital connection of an external device essessccssssscessesecsnseecesseecessnneeesseeees 7 Operations SOSOHOHHOHSSHHSHSHHHHHHHOHHSHHHHHHHHHHHHHHHHOHHHHHHHHOHHHHHOHHOHOHHHOHHOOEOHOHEOEEE 8 Listening to the sound from a Bluetooth device YAS 103 ORY sicastecsicsceccsseasccssacascceiancvecssoseseceseustecsuesereusioasvecsseasecezese 1 O Settings wisessasscecdsvscsucsncasnnsentossesonteastioansncosnsstensiesotveasesseeoaseesss IZ Programming the sound bar with the TV s remote control TV s remote control learning FUNCTION eeccssecsseecssecccscccnscccnsecsescessscessecessnecssneceseeceseessees 12 Sending the TV s remote signal through the soun
9. are the USA R reorient the antenna If the antenna lead in is 300 provided for your safety If the provided plug does NOTE This product has been tested and found to ohm ribbon lead change the lead in to coaxial type not fit into your outlet consult an electrician for comply with the requirements listed in FCC cable replacement of the obsolete outlet Regulations Part 15 for Class B digital devices Raden r ae A SiehaL eas 10 rote the power cord fom being walked on or Compliance with these requirements providesa Sie ans conac ea retailer aii Paes pinched particularly at plugs convenience reasonable level of assurance that your use of this i E ac G x The eis ar m receptacles and the point where they exit from the product in a residential environment will not result autiona to ES this type o aa i you OE A R apparatus in harmful interference with other electronic can not locate the appropriate retailer please contact equilateral triangle is intended to 11 Only use attachments devices This eduinment eenerates uses Tadia Yamaha Corporation of America A V Division 6600 AF EET quence Orangethorpe Ave Buena Park CA 90620 alert you to the presence of accessories specified by the frequencies and if not installed and used according saci alate ke aed acacia uninsulated dangerous voltage manufacturer to the instructions found in the users manual may 9 The above statements apply ONLY to those within the product s enclosure that 12
10. carefully as these different types of batteries may have the same shape and color Exhausted batteries may leak If the batteries have leaked dispose of them immediately Avoid touching the leaked material or letting it come into contact with clothing etc Clean the battery compartment thoroughly before installing new batteries Do not throw away batteries with general house waste Dispose of them correctly in accordance with your local regulations Keep batteries away from children If a battery is accidentally swallowed contact your doctor immediately When not planning to use the remote control for long periods of time remove the batteries from the remote control Do not charge or disassemble the supplied batteries YAS 103 only Radio waves may affect electro medical devices Do not use this unit near medical devices or inside medical facilities We Yamaha Music Europe GmbH hereby declare that this unit is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE CE FOR U K CUSTOMERS If the socket outlets in the home are not suitable for the plug supplied with this appliance it should be cut off and an appropriate 3 pin plug fitted For details refer to the instructions described below NOTE The plug severed from the mains lead must be dest
11. clear voice function When this function is enabled you can enjoy clear voice sounds while watching movies TV dramas news programs or sports programs o o ZM Flash 3 times enabled flash once disabled UNIVOLUME key Enables disables the UniVolume function When this function is enabled consistent volume is maintained between channels programs commercials and sound sources Flash 3 times enabled flash once disabled HINT The UniVolume function is automatically disabled when BLUETOOTH is selected as the input source AUDIO DELAY key Adjusts the audio delay to synchronize the sound with the video when the video image on the TV may seem delayed with respect to the sound Follow the procedure below to adjust the audio delay 1 Hold down AUDIO DELAY for more than 3 seconds The left most indicator flashes QO oO m oO QO QO QO Smaller delay 3 To finish the adjustment press AUDIO DELAY Larger delay HINT e The adjustment will be finished automatically if no operations are performed for 20 seconds Decoder indication The sound bar supports the following audio signals You can check the type of the input audio signal by the color of the indicator Ho Green Dolby Digital Red DTS Digital Surround mo Off PCM En 10 En Listening to the sound from a Bluetooth device YAS 103 only You can listen to the wireless sound from a Bluetooth device such as a smartphone or dig
12. correctly e Select the COAXIAL key on the remote control for the input source e Select the ANALOG key on the remote control for the input source En En Operations Preparing the remote control Peel off the protection sheet before use IW 3 Operating range of the remote control Remain within the operating range shown below Within 6 m Remote control sensor ra S 30 30 Cot Indicators The indicators on the front panel flash or light up to indicate the operation and setting status ooo STATUS TV BD DVD COAXIAL ANALOG BLUETOOTH SURROUND DTS D o o o Input keys Select an input source to be played back Audio from a device connected to the BD DVD input jack Audio from a device connected to the COAXIAL input jack Audio from a device connected to the ANALOG input jack BLUETOOTH YAS 103 only Audio from a Bluetooth connected device The indicator for the selected input source lights up Example when TV is selected TW BD DVD COAXIAL ANALOG BLUETOOTH a HINT e To play audio of the playback device connected to the TV or to watch videos of the playback device set the TV s input source to the playback device e For details on Bluetooth connection refer to Listening to the sound from a Bluetooth device YAS 103 only p 10 SUBWOOFER keys Adjust the volume of the subwoofer ml jmi o o z o al E Volume down Volume up VOLUME
13. e If a Bluetooth device is already connected to the sound bar terminate that Bluetooth connection then connect with the new device Terminating Bluetooth connection Bluetooth connection is terminated in the following cases When the Bluetooth connection is terminated the BLUETOOTH indicator flashes once The Bluetooth compatible device is turned off e The BLUETOOTH key on the sound bar s remote control is pressed for more than 3 seconds e The sound bar is turned off Using the Bluetooth standby mode The Bluetooth standby mode allows you to turn on or off the sound bar automatically that interlocked by the operation of the Bluetooth device How to set With the sound bar turned on hold down the BLUETOOTH STANDBY key on the sound bar s remote control for more than 3 seconds Holding down the BLUETOOTH STANDBY key for 3 seconds each time toggles the mode between enabled and disabled T TF BLUETOOTH STANDBY 1 ly D B tA IN 7 gt Pd N a Bo IN o E E N l Al Al Flash 3 times enabled flash once disabled When the Bluetooth standby mode is enabled and the sound bar is turned off the STATUS indicator lights up in red STATUS a Lights up red Functions available on Bluetooth devices with Bluetooth standby mode enabled Power on interlock function when the sound bar is turned off When Bluetooth connection is made on the device the sound bar will turn o
14. keys Adjust the volume of the sound bar Aly NI B Volume down gt Volume up LEARN key Sets the sound bar to the TV s remote control learning mode p 12 Remote control signal transmitter Transmits infrared signals YAMAHA BD DVD COAXIAL OOO j BLUETOOTH STANDBY SURROUND STEREO AUDIO Voice VOLUME DELAY ee SUBWOOFER VOLUME LEARN REPEATER TV REMOTE CONTROL the BLUETOOTH STANDBY AUDIO DELAY LEARN and 3 REPEATER keys require 3 second press REPEATER key Enables disables the TV Remote Repeater function p 14 power key Turns on or off standby the sound bar status Green turned on a arig Red Bluetooth standby anis Off turned off BLUETOOTH STANDBY key YAS 103 only Enables disables the Bluetooth standby mode p 11 SURROUND and STEREO keys Switch between surround and stereo 2 channel playback When surround playback is selected you can enjoy a realistic sound effect using Yamaha s exclusive AIR SURROUND XTREME SURROUND surRoUND Lights up Surround playback a STEREO SURROUND Off stereo playback o HINT e When 2 channel stereo signals are played in surround the EXIPLII indicator lights up mp Lights up Dolby Pro Logic Il m MUTE key Mutes the audio output Press the key again to unmute IA 71 Flash on mute CLEAR VOICE key Enables disables the
15. the oldest pairing information will be deleted En 17 Specifications Item specifications Amplifier Maximum Rated Front L R 30 W x 2 ch Section Output Power Subwoofer 60 W Type Acoustic suspension type Front Non magnetic shielding type Speaker Driver 6 5 cm 2 1 2 cone x 2 Section Frequency 150 Hz to 22 kHz Response Bass reflex type Type Non magnetic shielding type Subwoofer Driver 7 5 cm 3 cone x 2 Section ee ey 50 Hz to 150 Hz Response Supported audio PCM 2ch Decoder signal TV BD Dolby Digital DVD DTS Digital Surround Digital Optical 2 TV BD DVD Input Jacks Digital Coaxial 1 COAXIAL Analog RCA 1 ANALOG Bluetooth Ver 2 1 EDR version Supported A2DP SPP protocols Bluetooth Supported ae 03 codecs SBC MPEG4 AAC Wireless output Bluetooth Class 2 Maximum communication distance 10 m 33 ft without obstructions 18 En Power Supply U S A and Canada models AC 120 V 60Hz Taiwan model AC 110 120 V 50 60Hz Other models AC 220 240 V 50 60Hz Power Consumption 22 W Standby Power Consumption Less than 0 5 W Bluetooth General standby power consumption YAS 103 only 0 6 W 890 x 91 x 115 mm not including stands and brackets Dimensions 35 x 3 5 8 x 4 1 2 W x Hx D f i 890 x 109 x 121 mm including stands and brackets 35 x 4 1 4 x 4 3
16. turned on Problem Cause Remedy The power turns off immediately The auto power standby function worked When the auto power standby function is enabled and one of the following conditions is met the sound bar will automatically turn off No operations for 8 hours No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source Disable the auto power standby The automatic volume adjustment function worked To prevent excessive loudness the sound bar automatically controls its volume within a certain level when the sound bar is turned on If necessary turn up the volume p 8 function p 14 No surround effect Stereo playback is selected Select surround playback p 9 The volume is too low Turn up the volume p 8 The TV or playback device is set to output 2 channel audio such as PCM only Change the digital audio output setting on the TV or playback device to Dolby Digital or BitStream The audio is output from the TV built in speakers Set the TV volume to minimum p 6 Noise is heard The power cannot be turned on The protection circuitry has been activated three times consecutively If you try to turn on the power in this condition the STATUS indicator flashes For product protection the power The sound bar is too close to another digital or high frequency device Move those devices
17. within 10 meters 33 ft of each other Up to eight Bluetooth devices can be pairing with the sound bar If a ninth device is paired the oldest pairing information is deleted If pairing information for a device is deleted to use that device again pairing of the device is required again If a Bluetooth device is already connected to the sound bar terminate that Bluetooth connection then perform pairing with the new device Refer to Troubleshooting p 15 for troubleshooting Bluetooth connection Playing back audio from a Bluetooth device on the sound bar 1 With the sound bar turned on press the BLUETOOTH key on the sound bar s remote control to select Bluetooth as the input source The BLUETOOTH indicator on the front panel lights up in green BLUETOOTH XY BLUETOOTH Lights up 2 Turn on the Bluetooth device When Bluetooth connection is made correctly the BLUETOOTH indicator of the sound bar flashes 3 times BLUETOOTH Xe aS Flashes 3 times 3 Play back a song on the device NOTE e Perform Bluetooth connection with the device and sound bar within 10 meters 33 ft of each other e It may be necessary to select YAS 103 Yamaha in the Bluetooth device list again in the event that a connection problem occurs You may have to change the output setting to output audio to the sound bar depending on the Bluetooth device you are using e Adjust the volume level of the Bluetooth device as required
18. AC wall outlet and when the TV Remote Repeater function is enabled the function is usable even when the sound bar is turned off e If you have made the sound bar learn the volume operation p 13 the volume of the TV may be turned up when you turn up the volume of the sound bar with the TV s remote control In this case follow Step 3 in Connections p 6 to change the TV setting e You can check the status of the TV Remote Repeater function by the center indicator when turning on the sound bar B B B a ii B B B B Off enabled lights up disabled Setting the auto power standby function By enabling the auto power standby function you can avoid forgetting to turn off the sound bar after use or if you fall asleep while watching TV NOTE e When the auto power standby function is enabled and one of the following conditions is met the sound bar will automatically turn off No operations for 8 hours No audio input and no operations for 20 minutes when BLUETOOTH is selected as the input source 1 With the sound bar turned off hold down the MUTE key on the sound bar s remote control for more than 3 seconds You can check the status of the auto power standby function when turning on the sound bar Off enabled lights up disabled HINT e Initial setting varies depending on the country or region U K and Europe models enabled Other models disabled Initializing the sound bar Follow th
19. HOCKDO 7 Donotbl ae 1y til ti ings Install i manual meets FCC requirements Modifications not of interference which can be determined by turning NOT EN is d i Atben A at e ta t ns i a expressly approved by Yamaha may void your the unit OFF and ON please try to eliminate the OT OP 8 Dorot tstall near any hent sources ichas e authority granted by the FCC to use the product problem by using one of the following measures radiators heat registers stoves or other apparatus IMPORTANT When connecting this product to 5 Relocate either this product or the device that is CAUTION TO REDUCE THE RISK OF including amplifiers that produce heat Pp accessories and or another product use only high being affected by the interference ELECTRIC SHOCK DO NOT REMOVE 9 Do not defeat the safety purpose of the polarized or quality shielded cables Cable s supplied with this 6 Utilize power outlets that are on different branch COVER OR BACK NO USER grounding type plug A polarized plug has two product MUST be used Follow all installation circuit breaker or fuse circuits or install AC line SERVICEABLE PARTS INSIDE REFER blades with one wider than the other A grounding instructions Failure to follow instructions could filter s SERVICING TO QUALIFIED SERVICE type plug has two blades and a third grounding void your FCG authorization to use this product tn 7 Inthe case of radio or TV interference relocate PERSONNEL prong The wide blade or the third prong
20. away from the sound bar cannot be turned on Unplug the power cable from the AC wall outlet and contact the nearest authorized Yamaha dealer or service center The sound bar is not reacting The internal microcomputer is frozen due to an external electric shock such as lightning or excessive static electricity or toa drop in the power supply voltage Hold down l power on the front panel of the sound bar for more than 10 seconds to reboot it If the problem persists disconnect the power cable from the AC wall outlet and plug it again The sound bar operates by Another Bluetooth device is being operated nearby Terminate Bluetooth connection of the sound bar p 11 itself TV s 3D glasses The sound bar is blocking the 3D Check the position of the 3D glasses do not work glasses transmitter of your TV transmitter of your TV and adjust the position of the sound bar If necessary remove the stands of the sound bar p 5 En 15 16 En Remote control Problem Cause Remedy The sound bar The sound bar is out of the Use the remote control within the cannot be operating range operating range p 8 controlled using The batteries are weak Replace with new batteries p 8 the remote control The remote control sensor of the Adjust the lighting angle or reposition sound bar is exposed to direct the sound bar sunlight or strong lighting
21. d bar TV Remote Repeater function ssecsssecsssecssccssscesssccsstscsuecsusccsseccesccssuecesuecesnccesnecessecesnseesees 14 Setting the auto power standby FUNCTION sssssssssssssssssssssssrssseessssssseoreessess 14 Initializing the sound bar au ssssessccseescessseccessscessssecssssseessscecsnssseesseceesnseesenee 14 Troubleshooting eessssssoessosessosssosessosssosessosessosssosessossssesss 15 SPECIFICATIONS sssssssssssssssssssssescsssssssssesssosssstssssssssssosssssssssossssse 18 About this manual e Illustrations used in this manual refer to the YAS 103 Instructions are common to both YAS 103 and YAS 93 except where otherwise specified such as YAS 103 only Marks used in this manual NOTE This indicates precautions for use of the product and its feature limitations HINT This indicates supplementary explanations for better use IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions 2 Keep these instructions FCC INFORMATION for US customers eee 2 ee IMPORTANT NOTICE DO NOT MODIFY 4 Compliance with FCC regulations does not 4 Follow all instructions cores f bee are ree ee ee RISK OF s Dowctussihis appatanig hese wales THIS UNIT This product when installed as guarantee that interference will not occur in all ELECTRIC 6 Clean oni sith p cloth i indicated in the instructions contained in this installations If this product is found to be the source S
22. e OPTICAL OUTPUT HINT osc In the following cases connect the optical output of the playback device to the BD DVD input of the sound bar with an optical cable commercially available then select the BD DVD key on the remote control for the input source The TV does not have an optical output The TV does not output audio or outputs low volume audio from the connected connected to the TV cannot be heard as I I I I I I I I I I I playback device HDMI cable etc The audio from the playback device 4 surround sound OPTICAL OUTPUT Playback device such as a BD player Set top box ital connection of an external device Analog connection of an external device game console You can connect an external device that has a coaxial digital audio output such as a DVD player to the COAXIAL input jack of the sound bar You can connect an external device such as a game console or TV that does not have an optical output to the ANALOG input jacks of the sound bar ANALOG OIO COAXIAL Coaxial digital cable commercially available RCA stereo cable commercially available 8 Coaxial digital R audio output red white orange Analog audio output Game console etc NOTE NOTE e Make sure the left L and right R channels are connected
23. e procedure below to initialize the sound bar 1 Turn off the sound bar 2 Hold down power on the front panel of the sound bar for more than 3 seconds INPUT VOLUME 0 TES SBS TES TAC 7 go EC Flash initialized Troubleshooting Refer to the table below when the sound bar does not function properly If the problem Audio Problem Cause Remedy No sound you are experiencing is not listed below or if the instructions below do not help turn off the sound bar disconnect the power cable and contact the nearest authorized Yamaha dealer or service center First check the following The power cables of the sound bar TV and playback devices such as BD players are connected to AC wall outlets securely Another input source is selected Select an appropriate input source p 8 The mute function is activated Cancel the mute function p 9 The volume is too low Turn up the volume p 8 No sound is coming from the subwoofer The sound bar TV and playback devices such as BD players are turned on The connectors of each cable are securely inserted in to jacks on each device Power and system The volume of the subwoofer is too low Turn up the volume of the subwoofer p 8 The playback source does not contain low frequency signals Play back a sound source containing low frequency signals The volume decreases when the sound bar is
24. e that is emitting radio frequency signals Another Bluetooth device is connected Terminate current Bluetooth The Bluetooth connection of the sound bar with the device is disconnected Perform Bluetooth connection operations again p 10 The sound bar and device are too far apart Move the device closer to the sound bar There is a device microwave oven wireless LAN etc outputs signals in the 2 4 GHz frequency band nearby Move the sound bar away from the device that is emitting radio frequency signals The device s Bluetooth function is off Activate the Bluetooth function of the device The device is not set to send Bluetooth audio signals to the sound bar Check that the Bluetooth function of the device is set properly Playback on the device has not been performed Perform playback on the device The device s volume is set to minimum Turn up the volume level connection and perform pairing with the new device Cannot make a Bluetooth connection Another Bluetooth device is connected The sound bar cannot make multiple Bluetooth connections Terminate current Bluetooth connection and make connection for the desired device More than nine devices are paired and the oldest pairing information is deleted Perform pairing again The sound bar can retain pairing information for up to eight devices When pairing a ninth device
25. e they will not become loose If your foot or hand accidentally gets caught on a loose cable the sound bar may fall e Check that the sound bar is fixed securely after the installation Yamaha will bear no responsibility for any accidents caused by improper installations En En Connections Connect to a TV or other peripheral device CAUTIONS Do not connect the power cable of the sound bar to the AC wall outlet before making connections e Do not use excessive force when inserting the cable plug Doing so may damage the cable plug or AC wall outlet 1 Connect the TV and sound bar with the optical cable supplied Remove the cap of the optical cable and check the direction of the plug sB DE Connect the power cable of the sound bar to an AC wall outlet Set the TV as follows e Set the TV volume to minimum e Disable the TV built in speaker output if available HINT e If a setting to disable the speaker output is not available on your TV you may disable it by connecting headphones to the headphone jack on the TV For details refer to the manuals of the TV e The TV BD DVD and COAXIAL input jacks support the following audio signals PCM 2 channel Dolby Digital up to 5 1 channel DTS Digital Surround up to 5 1 channel Sound bar rear Power cable gt 2 To AC wall outlet Optical cabl
26. hin an equilateral triangle is intended to alert you to the presence of Change or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in aresidential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help This equipment compiles with FCC IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency RF Exposure Guidelines in Su
27. ital cable p 7 a ANALOG input jacks For connecting an external device with an RCA stereo cable p 7 Q IR flasher for TV Remote Repeater Transmits TV s remote control signals received at the remote control sensor to the TV p 14 43 Dual built in subwoofers The built in subwoofers are located in the bottom part of the sound bar Installation Place the sound bar on a flat surface such as on top of a TV cabinet 5 p Cautions e Do not place the sound bar on under any other devices such as BD player in a pile Doing so may cause a malfunction due to vibrations Do not touch the grilles fabric parts on the front of the sound bar The sound bar contains acoustic suspension speakers Do not place magnetically sensitive items hard disk drive etc near the sound bar Depending on your installation environment it may be better to connect the sound bar and external devices such as a TV before installing the sound bar Do not place the sound bar within 50 mm 2 of the TV The wall mount brackets on the rear panel can be removed as necessary Removing the stands When the sound bar blocks the view of the lower part of the TV screen or the remote control sensor of the TV remove the stands 18 mm 3 4 of the sound bar to adjust its height HINT e Use the TV Remote Repeater function p 14 to transmit TV s remote control signals via the sound bar f a _ NOTE e Keep the s
28. ital music player See also the operating manual of the B uetooth device for more details Bluetooth devices e EA Perform the following steps on the Bluetooth device to be connected For the first Bluetooth connection For subsequent Bluetooth connection Pairing a Bluetooth device with the sound bar 4 Playing back audio from a Bluetooth device on the sound bar Pairing a Bluetooth device with the sound bar When connecting to a Bluetooth device for the first time pairing between the device and sound bar is required Pairing is necessary for each Bluetooth device you use Once pairing is completed subsequent connection will be made automatically 1 Press the BLUETOOTH key on the sound bar s remote control to select Bluetooth as the input source The BLUETOOTH indicator on the front panel lights up in green CS BLUETOOTH BLUETOOTH a Lights up 2 Turn on the Bluetooth compatible device to be paired and perform pairing The operation varies depending on the device Refer to the operation manual of the device 3 Select YAS 103 Yamaha in the Bluetooth device list on the device If a passkey PIN is required enter the number 0000 Bluetooth PIN 0000 YAS 103 Yamaha K K OK Kk Kk OK KK When pairing is completed 9 or a completion message appears NOTE e Perform pairing with the Bluetooth device and sound bar
29. l signal well since the signals from the TV s remote control and IR flasher for TV Remote Repeater of the sound bar are interfering Disable the TV Remote Repeater function p 14 The power of the sound bar and of the TV switch in the opposite direction For example the TV is turned off if the sound bar is turned on when TV s remote control learning function is used The power of the TV was on when you performed the learning operation Press the power key on the TV and 0 power on the front panel of the sound bar to turn on them and then press the power key on the TV s remote control to turn off them Bluetooth YAS 103 only No sound is produced or the Problem Cause Remedy sound is Cannot make the BLUETOOTH is not selected as Select BLUETOOTH as the input interrupted the input source source during playback sound bar paired with the Bluetooth device The device does not support A2DP Perform pairing operations with a device which supports A2DP A Bluetooth adaptor etc that you want to pair with the sound bar has a password other than 0000 Use a Bluetooth adaptor etc whose password is 0000 The sound bar and device are too far apart Move the device closer to the sound bar There is a device microwave oven wireless LAN etc outputs signals in the 2 4 GHz frequency band nearby Move the sound bar away from the devic
30. n and will be ready to play back sound from the device Power off interlock function when the sound bar is turned on The sound bar will be turned off when Bluetooth connection is terminated on a Bluetooth device Only when BLUETOOTH is selected as the input source Using the HOME THEATER CONTROLLER application By installing the dedicated free application HOME THEATER CONTROLLER to a Bluetooth device such as a smartphone you can perform various operations easily and conveniently with the Bluetooth device Setting items basic operation sound field sound adjustments For details on HOME THEATER CONTROLLER see the product information on our website En 11 12 En Settings Programming the sound bar with the TV s remote control TV s remote control learning function Once you program the sound bar you can control it with your TV s remote control for functions such as turning on off the TV and sound bar simultaneously or volume up down and muting unmuting of the sound bar NOTE This function is available only when your TV s remote control uses IR infrared signal An RF Radio Frequency remote contol will not work If you want to use a cable or satellite set top box s remote control to operate the sound bar use your original TV s IR infrared remote control to program the sound bar then use the set top box s remote control to operate If by changing the volume of the sou
31. nd bar the TV s volume also changes set the TV s volume to minimum or disable speaker output 1 Turn off the TV 2 Turn off the sound bar 3 Hold down the LEARN key on the sound bar s remote control for more than 3 seconds to set the sound bar to the learning mode When the sound bar is in the learning mode the indicators on the front panel flash as shown below LEARN REPEATER TV REMOTE CONTROL NOTE e Steps 4 to 7 require only the TV s remote control and the keys on the front panel of the sound bar The remote control of the sound bar is not necessary e If the sound bar has already learned functions the following indicator light up Mute BD DVD Volume COAXIAL Volume ANALOG Power BLUETOOTH 4 Teach the sound bar the Mute code of the TV s remote control 4 1 Press INPUT on the front panel of the sound bar INPUT VOLUME 0 S 4 2 While pointing your TV s remote control at the remote control sensor hold down the mute key for more than 1 second twice or three times Approx 30 cm 1 ft Hold down more than 1 second more than 1 second more than 1 second more than 1 second Release Hold down Release Result Bleep buzzer Indicators Aly ly Successfully Once 0 SEC m o o ao vas o o learned Lights up Failed to learn z ye ale ole Ale aAa al Repeat from Twice AON ANS INSO O UNS INEO
32. nd bar to a wall Spacer x 2 Using when attaching the sound bar to a wall Features Enjoy powerful and realistic sound from the sound bar with built in subwoofer and easy installation and connection to a TV and other devices AIR SURROUND XTREME 7su din0 Enjoy 7 1 channel surround sound which creates a wide and deep soundstage as if speakers are set not only on the left and right but also behind of the listener p 9 e Sophisticated sound technology Enjoy powerful bass sound for the surround playback with the Yamaha original bass boost technology Bluetooth connection Bluetooth YAS 103 only Content on a Bluetooth compatible smartphone tablet or computer can be played back easily p 10 You can enjoy deep and fresh sound as close to the original by the Compressed Music Enhancer Also you can operate the sound bar easily using the dedicated controlling application HOME THEATER CONTROLLER TV s remote control learning function Operate the sound bar with the TV s remote control p 12 TV Remote Repeater function Enables the TV s remote signal to path through the sound bar If the installed sound bar blocks the TV s remote sensor the TV s remote will not work This function provides a convenient solution p 14 e Clear voice Makes voice sound such as dialogues and narrations clear p 9 e UniVolume UJyiVolume Maintains consistent volume between channels programs comme
33. not to obstruct heat radiation If the temperature inside this unit rises it may cause fire damage to this unit and or personal injury Do not plug in this unit to a wall outlet until all connections are complete Do not operate this unit upside down It may overheat possibly causing damage e Do not use force on switches knobs and or cords When disconnecting the power cable from the wall outlet grasp the plug do not pull the cable Do not clean this unit with chemical solvents this might damage the finish Use a clean dry cloth Only voltage specified on this unit must be used Using this unit with a higher voltage than specified is dangerous and may cause fire damage to this unit and or personal injury Yamaha will not be held responsible for any damage resulting from use of this unit with a voltage other than specified To prevent damage by lightning keep the power cable and outdoor antennas disconnected from a wall outlet or the unit during a lightning storm Do not attempt to modify or fix this unit Contact qualified Yamaha service personnel when any service is needed The cabinet should never be opened for any reasons When not planning to use this unit for long periods of time i e vacation disconnect the AC power plug from the wall outlet Be sure to read the Troubleshooting section on common operating errors before concluding that this unit is faulty Before moving this unit
34. of equipment While Bluetooth compatible devices use a technology minimizing the influence of other components using the same radio band such influence may reduce the speed or distance of communications and in some cases interrupt communications e The speed of signal transfer and the distance at which communications is possible differs according to the distance between the communicating devices the presence of obstacles radio wave conditions and type of equipment e Yamaha does not guarantee all wireless connections between this unit and devices compatible with Bluetooth function Information for Users on Collection and Disposal of Old Equipment and Used Batteries apd Sa Da These symbols on the products packaging and or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste For proper treatment recovery and recycling of old products and used batteries please take them to applicable collection points in accordance with your national legislation and the Directives 2002 96 EC and 2006 66 EC By disposing of these products and batteries correctly you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling For more information about collection and recycling of old products and batteries please contact your local municipality your wa
35. ound bar INPUT VOLUME 0 VW 7 2 While pointing your TV s remote control at the remote control sensor hold down the power key for more than 1 second twice or three times Result Bleep buzzer Indicators Aly Aly Successfully o o gt m a o o E amp O o learned meS IN o a Lights up Failed to learn a SES Bie si Se sl Bie 4 Repeat from Twice INO INS IN INE INE N T Step 7 1 Flash 8 To finish the learning mode press the LEARN key on the sound bar s remote control This completes the necessary settings Now you can operate the sound bar with the TV s remote control s mute key volume keys or power key HINT e The learning mode will be finished automatically if no operations are performed for 5 minutes e Set the TV volume to minimum When you turn up the volume of the sound bar with the TV s remote control the volume of the TV may be turned up at the same time In this case follow Step 3 in Connections p 6 to change the TV setting e You can press the Q key on the sound bar s remote control to finish leaning mode sound bar s remote control for more than 3 seconds for entering the learning mode When the sound bar is in the learning mode the indicators on the front panel flash as shown below LEARN REPEATER 7 7 N r VW A TV REMOTE CONTROL 2 Hold down INPUT on the front panel of the
36. pplement C to OET65 and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation MPE But it is desirable that it should be installed and operated with at least 20 cm and more between the radiator and person s body excluding extremities hands wrists feet and ankles This transmitter must not be co located or operated in conjunction with any other antenna or transmitter IMPORTANT Please record the serial number of this unit in the space below MODEL Serial No The serial number is located on the rear of the unit Retain this Owner s Manual in a safe place for future reference We Want You Listening For A Lifetime Yamaha and the Electronic Industries Association s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level One that lets the sound come through loud and clear without annoying blaring or distortion and most importantly without affecting your sensitive hearing Since hearing damage from loud sounds is often undetectable until it is too late Yamaha and the Electronic Industries Association s Consumer Electronics Group recommend you to avoid prolonged exposure from excessive volume levels LISTENING For ALitetime FOR CANADIAN CUSTOMERS To prevent electric shock match wide blade of plug to wide slot and fully insert CAN
37. rcials and sound sources p 9 Frequently asked questions The following section covers popular functions and frequently asked questions about the sound bar Q1 Can I operate the sound bar using the remote control of the TV Switching between the remote controls of the TV and sound bar is inconvenient A1 Yes You can control the sound bar using your TV s remote control by the TV s remote control learning function p 12 This function is available only for the IR infrared remote control Check your TV s remote control type Q2 The TV s remote control does not work after the sound bar is installed in front of the TV A2 The sound bar will transmit TV s remote control signals by the TV Remote Repeater function p 14 This function is available only for the IR infrared remote control Check your TV s remote control type Q3 Can I make voice sound more clear A3 Yes Dialogue in movies TV news or sports programs etc can be made clearer using the clear voice function p 9 Q4 How do I connect the sound bar if the TV does not have an optical output A4 If the TV has analog audio outputs red and white terminals connect to ANALOG input of the sound bar with an RCA stereo cable p 7 In this case select ANALOG for the input source of the sound bar p 8 Q5 Can set the sound bar to turn off automatically when am not using it A5 Yes Using the auto power standby function
38. remote control signal was disturbed by the TV screen light Turn off the TV and perform the learning operation again p 12 The TV s remote control does not use infrared signals Some remote controls may not work even if it uses infrared signals The TV Remote Repeater function cannot be used in this case Adjust the position of the sound bar so that the remote control sensor of the TV is not blocked by the sound bar and use the TV s remote control to operate the TV The sound bar and TV are too close or too far from one another Move the sound bar away from the TV more than 50 mm 2 p 5 If necessary remove or attach the stands of the sound bar to adjust height for the IR flasher for TV Remote Repeater of the sound bar positioning in front of the remote control sensor of the TV p 5 Sound is coming from the TV when the sound bar volume is turned up with the TV s remote control when TV s remote control learning function is used Audio output is enabled on the TV Change the TV setting to disable the TV speaker output If a setting to disable the speaker output is not available on your TV try the following methods Connect headphones to the headphone jack on the TV Set the TV volume to minimum There is any obstacle such as cables between the sound bar and TV Remove the obstacle between the sound bar and TV TV is not receiving the remote contro
39. royed as a plug with bared flexible cord is hazardous if engaged in a live socket outlet SPECIAL INSTRUCTIONS FOR U K MODEL As long as this unit is connected to the AC wall outlet it is not disconnected from the AC power source even if you turn off this unit by In this state this unit is designed to consume a very small quantity of power Power key Turns on the power of this unit or sets it to the standby mode YAS 103 only Do not use this unit within 22 cm 9 inches of persons with a heart pacemaker implant or defibrillator implant IMPORTANT THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE Blue NEUTRAL Brown LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED Making sure that neither core is connected to the earth terminal of the three pin plug En En Supplied items Make sure you have received all of the following items Sound bar Remote control Battery x 2 Optical cable 1 5 m 4 9 ft AAA R03 UM4 Mounting template Using when attaching the sou
40. sound bar for more than 3 seconds INPUT VOLUME 0 i NS J A ZEC o o o o tec sec oO Flashes in red cleared If the clearing is completed you will hear the bleep sound three times 3 Press the LEARN key on the sound bar s remote control En 13 14 En Sending the TV s remote signal through the sound bar TV Remote Repeater function When the TV Remote Repeater function is enabled the sound bar relays the TV s remote signal received by the front sensor to the rear transmitter This function should be enabled when you place the sound bar in front of your TV and you cannot operate your TV with the TV s remote control NOTE e This function is available only when your TV s remote control uses infrared signals e TV s remote control sensor cc U TV s remote control IR flasher for TV Remote Repeater E 1 Turn on the sound bar 2 Hold down the REPEATER key on the sound bar s remote control for more than 3 seconds to enable disable the TV Remote Repeater function LEARN Q REPEATER TV REMOTE CONTROL Flash 3 times enabled flash once disabled This completes the necessary settings When the TV Remote Repeater function is enabled you can operate your TV from the TV s remote control via the sound bar HINT e The TV Remote Repeater function is disabled by default e If the power cable of the sound bar is connected to an
41. ste disposal service or the point of sale where you purchased the items Information on Disposal in other Countries outside the European Union These symbols are only valid in the European Union If you wish to discard these items please contact your local authorities or dealer and ask for the correct method of disposal Note for the battery symbol bottom two symbol examples This symbol might be used in combination with a chemical symbol In this case it complies with the requirement set by the Directive for the chemical involved En 19 AVEEA11102A Important Notice Guarantee Information for customers in EEA English and Switzerland For detailed guarantee information about this Yamaha product and Pan EEA and Switzerland warranty service please either visit the website address below Printable file is available at our website or contact the Yamaha representative office for your country EEA European Economic Area http europe yamaha com warranty YAMAHA YAMAHA CORPORATION 2013 Yamaha Corporation Printed in Malaysia ZK08300
42. tands and screws in a safe place for future use Attaching the sound bar to a wall 5 Cautions When installing the sound bar on a wall all installation work must be performed by a qualified contractor or dealer The customer must never attempt to perform this installation work Improper or inadequate installation could cause the sound bar to fall resulting in personal injury Do not attach the sound bar to a wall that is made of weak materials such as plaster or veneered woods Doing so may cause the sound bar to fall Make sure you use commercially available screws that can support the weight of the installation specified in Step 2 on the right Using clamps other than specified screws such as short screws nails and two sided tape may cause the sound bar to fall How to install on the wall 1 Attach the mounting template on a wall and mark for the screw holes fo or thumbtacks A Mounting template supplied 7 Screw holes 2 Remove the mounting template from the wall then install commercially available screws and supplied spacers as illustrated below at the points marked on the wall Spacer supplied ane 7to9mm 1 4 to 3 8 K N l Emmis L 20 mm 3 4 2 to 4 mm 1 16 to 3 16 or more 3 Hang the sound bar on the screws i 1 Mounting holes f j on rear of sound bar LO E Cautions e Fix the cables in place wher
Download Pdf Manuals
Related Search