3M Mobile Projector MP300 User Manual
Contents
1. 3M Mobile Projector MP300 User Manual 3M Mobile Projector MP300 2012 3M All Rights Reserved 3M Mobile Projector MP300 Important Notice All statements technical information and recommendations related to 3M s products are based on information believed to be reliable but the accuracy or completeness is not guaranteed Before using this product you must evaluate it and determine if it is suitable for your intended application You assume all risks and liability associated with such use Any statements related to the product which are not contained in 3M s current publications or any contrary statements contained on your purchase order shall have no force or effect unless expressly set forth in a written agreement signed by an authorized officer of 3M Technical Support For technical support call 1 866 631 1656 or email meetings mmm com 2012 3M All Rights Reserved 3 3M Mobile Projector MP300 Copyright Trademarks and Properties Notices 3M and the 3M logo are trademarks of 3M Company Used under license in Canada MHL and the MHL logo are a trademark registered trademark or service mark of MHL LLC in the United States and or other countries High Definition Multimedia Interface HDMI is a registered trademark of HDMI Licensing LLC in the United States and or other countries iPad is a trademark of Apple Inc registered in the U S and other countries DLP and the DLP logo are trademarks o2. All Rights Reserved 3M Mobile Projector MP300 Orientation amp Normal Default eV Upside down V1 Upside down and mirrored AA Mirrored Picture Mode Changes the image based on the input type video or computer Navigation since the buttons on the projector have multiple Help purposes the navigation help provides a key for the buttons on the projector Using the menu You can navigate the menu using the buttons on the projector or the remote control Open the Projector Menu Press the Menu button select a Menu Item e Projector Control Panel Press the Volume Up and Down to move the selector e Remote Control Press the up or down arrows Adjust Menu Item e Projector Control Panel Press the Info button and press Volume Up and Down to adjust the setting 2012 3M All Rights Reserved 33 3M Mobile Projector MP300 e Remote Control Press the Ok or right arrow and then press right or left button to adjust the setting Return to Menu Item Selection Press the Menu button or press OK on the remote control On Screen Icons One of the these icons will appear when the projector does not detect an input detects an MHL device but no input or the video resolution is not supported acl No input detected IST O A MHL device is detected but the video signal is not detected video resolution is not supported Information Screen Press the Info button on the remote or projecto
3. Video Compatibility Video Resolutions Dimensions Weight Tripod Socket Operating Conditions Temperature Range Humidity Range Altitude Range Power Consumption 2012 3M All Rights Reserved 41 TI DLP 0 3 WVGA 854 x 480 Pixels 16 9 16 5 8 in 199 1 4 in 42 2 506 cm 10 in 80 in Diagonal 25 4 203 2 cm 1 1 66 100 DC in HDMI MHL 1x2 Watt Speaker Headphone Jack NTSC PAL 480p 576p 720p 1080i 4 33 x 4 21 x 2 in 110 x 107 x 51 6mm lt 15 9 oz lt 450 g Ya 20 32 95 F 0 35 C 10 80 RH without condensation Sea Level to 1 829 m 6000 11 5 Watts Standard Lamp Mode 7 0 Watts Eco Lamp Mode 3M Mobile Projector MP300 Battery Specification Type Rechargeable Lithium lon Battery Rated Capacity 7 4 V 2600mAh Video and Audio Support The following list is the resolutions are supported by the projector The projector displays a WVGA 854x480 image The best input resolution for the projector is 480p Other higher resolution will be reduced to 480p resolution Video Support Description Resolution width x height Refresh Rate Aspect Ratio A80p 640x480p 99 94 60 Hz 4 3 720x480p 59 94 60 Hz 4 3 720x480p 59 94 60 Hz 16 9 3 0 6p 720x576p 00 Hz 4 720x576 50 Hz 16 9 720p 1280x720p 59 94 60 Hz 16 9 1080 1920x1 0801 59 94 60 Hz 16 9 1440x1080i 50 Hz 16 9 Audio Support Audio Format Linear PCM Number of Channels 2 sampling Frequency 32 44 1
4. and 48 kHz Number of Bits Per Sample 16 20 or 24 bits 42 2012 3M All Rights Reserved 3M Mobile Projector MP300 Accessory List Call 1 866 831 1656 to order 3M accessories 3M Power Adapter Kit 78 6972 0123 0 Replacement power supply and battery Charger 3M Remote Replacement Remote Contra 3M Portable Screen 78 697 2 0059 6 Double the bightness of your image for a professions OOK Fits up to a 26 image 3M Tripod A snap to set up collapse and carry Lege extend 12 2012 3M All Rights Reserved 43 3M Mobile Projector MP300 Limited Warranty The 3M Mobile Projector MP300 the 3M Product is warranted to be free from defects in material or manufacture for a period of 90 days from the date or purchase If the product does not conform to the warranty within the warranty period 3M s exclusive obligation is to repair replace or refund the purchase price of the non conforming product To the extent permitted by law 3M will not be liable for indirect incidental special or consequential damages irrespective of the legal theory asserted lf the product needs service please call 1 866 631 1656 For the detailed terms and conditions of the warranty go to http www 3MPocketProjector com support or contact us at 1 866 631 1656 or meetings mmm com 44 2012 3M All Rights Reserved 3M Mobile Projector MP300 Regulatory Notices FCC STATEMENT CLASS B This e
5. turn off DC Input Powers the projector or charges the battery using the 3M power supply Audio Output Allows you use earphones or external speakers instead of the built in speaker Service Port Projector Reset Button HDMI MHL Port Receives HDMI and MHL signal from compatible video devices Cover 2012 3M All Rights Reserved 11 3M Mobile Projector MP300 Projector Button Panel elelo lL o 6660606000 1 Volume Down Button Turns down speaker or audio out output Down and Left Arrow for projector menu system 2 Volume Up Button Turns up speaker or audio out output Up and Right Arrow for projector menu system 3 Information Button Opens the projector information window 4 Remote Control Receiver Accepts commands from 3M remote control 5 Menu Button Opens the projector menu 6 Power Button Powers the projector on and off 7 Status Light Provides the projector s power and charging status 12 2012 3M All Rights Reserved 3M Mobile Projector MP300 Parts of Remote Control 2012 3M All Rights Reserved 1 Infrared LED Transmit remote control commands to projector 2 Arrow Buttons Moves the selector or cursor in projector menu or the MHL enabled device s screen 3 Standby Turns the projector s lamp off or on 4 OK Button Press to select or click an item 5 Back Button Press to open previous screen on the MHL enabled device 6 Rewind Rewinds
6. material Restricted Values a 0 1 by weight for each of lead mercury 46 2012 3M All Rights Reserved 3M Mobile Projector MP300 hexavalent chromium polybrominated biphenyls or polybrominated diphenyl ethers or b 0 01 by weight for cadmium 2012 3M All Rights Reserved 47 For additional support 866 631 1656 3MMobileProductivity com Mobile Interactive Solutions Mi
7. of the image or move away from the image The image is too dim e Reduce the image size and or decrease darken the room lighting 38 2012 3M All Rights Reserved 3M Mobile Projector MP300 The image seems bright enough but there are no details in the dark shadows e Open the projector menu and increase brightness setting and then decrease the contrast slightly The image seems bright enough but there are no details in the highlights e Open the projector menu and decrease contrast Adjusting the Volume There is no audio coming out of the speaker e Turn up the volume or turn off mute e Turn up the volume on the external speakers e There may be a moment of silence in the show you are watching Using the Remote Control The remote control does not work e Remove the plastic film that is in between the battery and the remote control e Replace the battery ae battery size is a CR 2025 e The remote control is out of range of the projector The remote control s range is up to 20 feet 2012 3M All Rights Reserved 39 3M Mobile Projector MP300 e Sunlight or lighting in the room can interfere with the projector s reception of the remote control s signal 40 2012 3M All Rights Reserved 3M Mobile Projector MP300 Product Specification Imager Technology size Resolution Aspect Ratio Projection Distance Image Size Throw Ratio Diagonal Distance Lens Offset Inputs Audio Outputs
8. the audio output Additionally MHL enabled devices plugged into the projector can adjust the projector volume level using the device s remote Display Volume Level Press the volume up or down button to display the volume Slider Increase or Decrease Volume Press the volume up button to increase the audio volume or press the volume down to decrease the audio volume Quickly Increase or Decrease Volume Press and hold the volume up button to quickly increase the audio volume or press and hold the volume down to quickly decrease or mute the audio volume Mute the Sound Press the volume up and down on the projector at the same time or press the mute button on the remote control 2012 3M All Rights Reserved 23 3M Mobile Projector MP300 Remote Control The 3M remote control controls the projector or any MHL enabled device plugged into the projector Remove Protective Film Before you can begin using the remote control you must remove the protective film from the battery compartment Remove the film as shown below Using the Remote When using the remote control point the remote control s infrared transmitter at the receiver on the projector Sometimes you can control the projector by pointing the remote at the surface in front beside or above the projector The remote control s range is up to 20 feet Note Sun light and some indoor lighting may reduce the range of the remote control 24 2012 3M All Rights Rese
9. the dark levels of the image appear If you are unable to see the detail try reducing the image size or the lighting in the room Using the Remote Press the menu button at the top right of the remote control press Ok button press the right arrow to increase the brightness or the left arrow button to decrease the brightness You can exit the menu by pressing the menu button twice Using the Projector Keypad Press the menu button press the Info button press the volume down to decrease the brightness and volume up to increase the brightness You can exit the menu by pressing the menu button twice 2012 3M All Rights Reserved 21 3M Mobile Projector MP300 Adjusting Contrast Adjust the contrast setting until details in the bright level of the image appear Using the Remote Press the menu button at the top right of the remote control press the down arrow press Ok button press the right arrow to increase the contrast brightness or the left arrow button to decrease the contrast You can exit the menu by pressing the menu button twice Using the Projector Keypad Press the menu button press the Info button press the volume down to decrease the brightness and volume up to increase the brightness You can exit the menu by pressing the menu button twice 22 2012 3M All Rights Reserved 3M Mobile Projector MP300 Volume Up Down The volume buttons on the projector and the remote control adjust the sound from the speakers or
10. while the status indicator is green contact 3M for additional support e The Lamp is off Press the Lamp ON Off button on the remote control The remote contro will not turn on the projector e When the projector is new and never been turned on you must use the power button on the projector Now you can turn on the projector by pressing the power button on the projector or the remote control 2012 3M All Rights Reserved 37 3M Mobile Projector MP300 The status indicator on the projector flashes red e The projector s battery needs to be charged Setting Up the Projector The projector falls over when place it on its rear cover e The cover may not be seated properly There is a tongue on the bottom corner of the cover Insert the tongue into the groove on the projector and the rest of the cover will snap into place The image is tinted or discolored e The wall or surface you re projecting onto is colored Try projecting onto a white wall or surface e The lens may be dirty Use a dry cotton swab to clean it off Focusing the Image The image is blurry e Use the focus wheel on the side of the projector next to the lens to sharpen the image e Reduce the input resolution The native resolution of projector is 480p Therefore resolutions greater that 720p may appear blurry e f you are closer to the projected image than the projector you might be seeing the individual pixels that make up the image Reduce the size
11. M All Rights Reserved 5 3M Mobile Projector MP300 Warning To reduce the risk associated with hazardous voltage fire explosion battery leakage or overheating which may cause serious injury or death e Do not leave the product in a car or in direct sunlight for extended periods of time 20 C to 70 C e Do not disassemble modify the product or attempt to remove the battery e Do not attempt to service this product Contact manufacturer e Do not use the product in water or a damp environment e Do not use a damaged product cables or power adapter e Charge with 3M power adapter only e Do not dispose of the remote control battery by incineration or fire To reduce the risks associated with driver distraction e Do not shine light into the driver s eyes e Driver should not operate product while driving To reduce the risks associated with choking e Keep the remote control all cables and small parts away from young children To reduce the risks associated with hearing loss e Be sure to read earphone manufacturer s instructions with respect to volume level e User is responsible to set a safe volume level To reduce the risk of injury to small children e Supervise the use of this product by small children e Keep small children away from the projector lens when the product is powered on 6 2012 3M All Rights Reserved 3M Mobile Projector MP300 Caution To reduce the risk associated with environmental
12. cator light provides information about the projector s power battery and error status Status Indicator Light Meaning Solid amber The projector is charging Solid green The projector is on Flashing green The projector is finished charging Flashing amber The projector has overheated Flashing red The battery power is low 2012 3M All Rights Reserved 17 3M Mobile Projector MP300 Setting up the Projector The projector is quick and easy to setup You can project the image onto most flat surfaces This section covers positioning the projector focusing the image and adjusting the brightness and contrast settings Choosing a surface The best surface for the image is a flat white surface In most cases lightly textured walls do not affect the image quality Alternatively a color wall will change the hue of the image You can either point the projector at a wall or projector screen or a ceiling Placing the projector Place the projector on a stable surface You can place the projector on its foot or on the rear cover You can even attach the projector to a tripod 18 2012 3M All Rights Reserved 3M Mobile Projector MP300 Attaching the Projector to Tripod Optional Accessory On the bottom of the projector you will find a tripod socket 1 4 20 that fits most standard camera tripods including the optional 3M tripod 78 6972 0073 7 2012 3M All Rights Reserved 19 Distance ver
13. dio and video outputs Notes 1 HDMI not included 2 Please reference the device s user manual and specification for compatibility with HDMI 30 2012 3M All Rights Reserved 3M Mobile Projector MP300 Connecting to a Display Port Video Device The 3M Mobile Projector can play video and audio from your Display Port compatible device You will need a Display Port to HDMI Adapter or cable 1 Connect DisplayPort to HDMI adapter into device 2 Connect the HDMI end of the cable to the projector s HDMI MHL input 3 Connect the other end of the cable into the HDMI port on the adapter ESS SZ ESS Soe WOES Le Notes 1 The DisplayPort adapter and HDMI Cable are not included 2 Please reference the device s user manual and specification for compatibility with Display Port 2012 3M All Rights Reserved 31 3M Mobile Projector MP300 Menu The projector s menu allows you to adjust the brightness contrast lamp power and picture mode The following section description each setting and how the navigate the menu system v OK ES Item Menu Item Description 1 Brightness Adjusts the dark levels of the image 2 Contrast Adjusts the bright levels of the image Lamp Power Switches between standard and eco mode Eco mode extends the battery life by reducing the power and brightness of the lamp Eco Normal Default Image Changes the image orientation 32 2012 3M
14. disposal hazards which may cause minor or moderate injury e Dispose of the product and accessories in accordance with the federal state local or regional laws which cover the disposal of electrical and electronic waste To reduce the risks associated with projector LED bright light e Do not look directly into the projector lens or shine it into anyone s eyes To reduce the risks associated with tripping and falling e Position the cables so that they are not a tripping hazard To reduce the risk of muscle strain which if not avoided may cause minor or moderate injury e Do not mount or position the projector in awkward viewing positions SAVE THESE INSTRUCTIONS 2012 3M All Rights Reserved 7 3M Mobile Projector MP300 Introduction Thank You This product has been produced in accordance with 3M quality and safety standards to provide smooth and trouble free use in the years to come For optimum performance please follow the operating instructions carefully Product Features Quick seamless visual presentations are critical in today s business world however projectors often act as a roadblock to accomplishing this fundamental task Many professionals are opting for lugging around a huge projector renting a projector at a substantial cost or opting for no projector at all and eating the cost of printing color presentations Say goodbye to these frustrations Say hello to simple plug n play projection Introducing t
15. erved 3M Mobile Projector MP300 Note Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment CE Statement ElectroMagnectic Compatibility Statement Meets 2004 108 EC Directive Low Voltage Directive Meets 2006 95 EC Directive WEEE Statement The following information is only for EU members States The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002 96 EC WEEE The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste but use the return and collection systems according to local law RoHS Statement Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment known as RoHS 2011 65 EU of the European Parliament and of the Council and the Regulation 1907 2006 known as REACH relating to Substances of Very High Concern SVHC s the European Union s Directive 94 62 EC relating to packaging the U S Lacey Act and other similar laws Substance Laws Product will not contain substances in excess of permitted concentration values established by substance Laws unless the applicable specifications specifically permit that substance in a higher concentration value Without limiting the forgoing substances in the product will not exceed the following maximum concentration values in any homogeneous
16. essory adapters or cable from the manufacture Connecting to the Projector The HDMI MHL port on the projector can accept a standard HDMI connector Once you plug the cable into the port you can close the cover 1 Open Cover 2 Plug in HDMI cable 2012 3M All Rights Reserved 27 3M Mobile Projector MP300 3 Route the cable and close the cover 28 2012 3M All Rights Reserved 3M Mobile Projector MP300 Connecting to a MHL Device The 3M Mobile Projector supports MHL through the HDMI port While playing video and audio from your MHL compatible device the 3M Mobile Projector charges your device Additionally you can control your device using the projector s remote control The standard MHL cable has a microUSB connector on one end and a HDMI connector on the other 1 Connect the HDMI end of cable to the projector s HDMI MHL input 2 Connect the other end of the cable to the device s microUSB port MHL Notes 1 MHL cable not included This cable is also known as a passive MHL cable 2 Please reference the device s user manual and specification for compatibility with MHL 2012 3M All Rights Reserved 29 3M Mobile Projector MP300 Connecting to a HDMI Video Device The 3M Mobile Projector can playback video and audio from a device with HDMI output 1 Connect the HDMI end of the cable to the projector s HDMI MHL input 2 Connect the other end of the cable to the video device s au
17. f Texas Instruments DisplayPort Certified DisplayPort Dual mode DisplayPort and VESA are registered Trademarks of the Video Electronics Standards Association microsD and the microSD logo are Trademarks of the SD Card Association All other product names are trademarks registered trademarks or servicemarks of their respective owners 4 2012 3M All Rights Reserved 3M Mobile Projector MP300 Intended Use Statement The 3M Mobile Projector MP300 is designed to operate with the 3M Power Adapter and an HDMI or MHL enabled device in environments that meet these conditions e 0 to 35 C 32 to 95 F e 10 80 RH without condensation e 0 1829 m 0 6000 feet above sea level Continued exposure to smoke grease oil and other airborne contaminants can affect the operation or performance of the projector Use of this product in adverse conditions will void the product warranty Safety Information Please read understand and follow all safety information contained in these instructions prior to the use of this projector Retain these instructions for future reference Explanation of Signal Word Consequences Warning Indicates a potentially hazardous situation which if not avoided could result in death or serious injury and or property damage Caution Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury and or property damage 2012 3
18. he 3M Mobile Projector MP300 e Ultra portable small enough to put into a coat pocket with up to 3 5 hour battery life e Quick set up turn on and present in seconds e Built in speaker e Bright enough for a variety of settings 60 lumens not designed for brightly lit environments e Beautiful design intuitive plug n play interface e HDMI MHL mirror your iPad tablet laptop and smartphone device 8 2012 3M All Rights Reserved 3M Mobile Projector MP300 Package Contents The 3M Mobile Projector MP300 comes with the following items If you are missing any of these items please contact 3M 1 3M Mobile Projector MP300 2 HDMI Cable 3 Power Adapter 4 Qutlet Adapters 4 5 Remote Control 6 Product Warranty and Safety Guide and Quick Start Guide 2012 3M All Rights Reserved 9 3M Mobile Projector MP300 Parts of Projector Front Top View 1 Button Panel Turn on and control projector 2 Speaker 3 Air Vent Do not block the air vents while projector is operating or cooling down This will cause projector to overheat and automatically turn off 4 Projection Lens 5 Focus Wheel Adjusts the image sharpness 10 2012 3M All Rights Reserved 3M Mobile Projector MP300 Bottom Rear View 9 10 11 12 13 Tripod Mount Air Vents Do not block fans or vents while projector is operating or cooling down This will cause projector to overheat and automatically
19. he power adapter into the projector e Make sure the power outlet is working e Make sure the connector from the power adapter is plugged into the DC In on the projector and not the headphone jack e When fully charged the LED indicator will flash green Installing the HDMI or MHL cable into the Projector The HDMI or MHL cable will not insert into the projector e There may be a dust cap on the end of the connector Remove it before inserting connector into the projector e When you insert the connector make sure the connector orientated correctly The cover hits the cable when close the cover 36 2012 3M All Rights Reserved 3M Mobile Projector MP300 e There is a cutout on the bottom corner of the cover for the cable to exit Route the cable down and to the right then close the cover e There is tab on the bottom corner of the cover Make sure the tab inserts into the groove on the projector and the rest of the cover snaps into place Turning the Projector On or Off The projector will not turn on e The battery is not charged Plug the power adapter into the projector and try again The projector button panel is on but the projector is not projecting an image e The video source such as the DVD Player is outputting a black image First try disconnecting the HDMI video cable Do you see the 3M logo screen If not try turning off the projector and turning it on again If you still do not see a 3M Logo screen
20. of battery life while in ECO lamp mode When the battery needs to be charged the status indicator LED starts flashing red The battery should be fully charged before using the projector for the first time Charge the battery 1 Turn the projector power off 2 Connect the power adapter to the projector s DC input 3 Connect the other end of the power adapter to the electrical outlet 4 The status indicator will change to amber while the battery is charging 5 Allow three hours to fully charge the battery When charging is complete the status indicator will flash green Battery Charging Notes e If the projector power is off allow three hours for the battery to fully recharge If the projector power is on the battery will take longer to charge e The battery has a lifespan and ages every time it is fully charged and discharged The battery will gradually lose charge capacity as it ages Battery Maintenance Tips e Charge and discharge the battery by turning on the projector at least once a month e When storing the projector for more than a month store it at 50 charge e The battery is at 50 charge when half of the battery icon is white 2012 3M All Rights Reserved 15 3M Mobile Projector MP300 e Do not store the projector when it is fully discharged It will lose the ability to charge Turning on and off the Projector Press the power button on the projector to turn on the projector After the projector is powe
21. quipment has been tested and found to comply with the limits for aClass B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help NOTICE This Class B digital apparatus complies with Canadian ICES 003 INSTRUCTIONS TO USERS This equipment complies with the requirements of FCC equipment provided that the following conditions are met If the cables include a EMI ferrite core attach the ferrite core end of the cable to the projector Use the cables which are included with the FRERE or Specified 2012 3M All Rights Res
22. r to open the information screen The information shows you the if the sound is muted or not the lamp power level and battery power level CEI 34 2012 3M All Rights Reserved 3M Mobile Projector MP300 Reset Button The reset button restarts the projector in the event the projector stops responding Reset the projector by disconnecting the video input and power and then press the reset button using an uncoiled paper clip This will turn off the projector and allow you to turn the projector on again Reset button Cleaning the Projector 1 Turn off the projector and disconnect power and other cables 2 Use a soft cloth such as the 3M High Performance Cleaning Cloth to wipe off dust If the dust is difficult to remove dampen the cloth with clean water and then wipe the projector clean Then use a clean cloth to dry the projector Important Note Do not use cleaning chemicals or solvents to clean the projector Cleaning chemicals and solvents may cause the plastic parts to discolor 2012 3M All Rights Reserved 35 3M Mobile Projector MP300 Troubleshooting The Power Adapter and Charging the Battery do not see where to insert the outlet clip into the power adapter e There is a blank clip inserted into the power adapter when it is shipped Remove the blank clip which covers the power adapter contacts Now install an outlet clip tt 4 GI E eR s E ke is do not see an amber light when I plug t
23. red on for the first time you use the power button the projector or remote control to turn the projector on and off MHL enabled device such as a smartphone receives power from the projector You can turn off the projector s lamp without turning off the MHL enabled device The Lamp On and Off button is on the remote control Turning the Projector On Press the power button on the projector or remote control Note Some devices that receive their power from the projector and might take 30 seconds or more to become ready to use Turning the Projector Off Press and hold the power button until the projector turns off Turning the Lamp On and Off You can turn the projector s lamp off without turning the projector off by pressing the lamp button on the remote control The projector lamp will turn off immediately while the cooling fans continue to run 16 2012 3M All Rights Reserved 3M Mobile Projector MP300 While the projector s lamp is off the status indicator remains green This tells you that the lamp is off but the projector is still on Press Lamp On Off button on the remote again and the lamp will turn on Important Note Even though the lamp is off the projector continues to use a power and generate heat The projector will turn off if it overheats or looses battery power You prevent the projector from turn off by keeping the air vents clear and plugging it into the power adapter Status Indicator lights The status indi
24. rved 3M Mobile Projector MP300 Replacing the Battery in the Remote Control Replace the battery in the remote control with a CR2025 battery 1 Remove the battery and battery tray by holding latch toward the center of the tray and then pull the tray out of the remote control 2 Place the new battery into the tray and orientating the battery positive size as indicated on the tray 3 Finally slide the tray into the remote control ne 2012 3M All Rights Reserved 25 Connecting to other devices The 3M Mobile Projector connects to other digital video devices such as tablets computers smartphones and dvd players Compatible device will most likely have one of the following video output connector Description Mini HDMI Micro HDMI Micro USB MHL Display Port Connector on Device Cable Connector 26 3M Mobile Projector MP300 Example Devices DVD Players BluRay DVD Players Game Consoles Set Top Boxes Computers Portable Digital Media Player Computers Tablet and Smartphones Tablets and Smartphones Computers 2012 3M All Rights Reserved 3M Mobile Projector MP300 Notes 1 Not all devices with a microUSB port are MHL enabled devices Check the device s specification before purchasing a MHL cable 2 some products have proprietary connectors not shown above such as the dock connector on the Apple iPad or iPhone Check for a digital video acc
25. sus Image Size The 3M Mobile Projector can project an image from 10 inches 22 1 cm to 80 inches 265 7 cm diagonal As you increase the size of the projected image you will need to decrease darken the ambient room lighting Refer to the chart for associated dimensions Diagonal 10 in 25 4 cm 20 in 50 8 cm 35 in 88 9 cm 45 in 114 3 cm 55 in 139 7 cm 65 in 165 1 cm 76 in 193 0 cm 80 in 203 2 cm Image Size Width 8 3 4 in 22 1 cm 17 3 8 in 44 3 cm 30 1 2 in 77 5 cm 39 1 4 in 99 6 cm 47 in 121 8 cm 56 5 8 in 143 9 cm 66 1 4 in 168 3 cm 69 3 4 in 177 1 cm 20 Height 4 7 8 in 12 4 cm 9 3 4 in 24 9 cm 17 1 8 in 43 6 cm 22 in 56 0 cm 26 in 68 4 cm 31 7 8 in 80 9 cm 37 1 4 in 94 6 cm 39 1 4 in 99 6 cm 3M Mobile Projector MP300 DIREN 16 5 8 in 42 2 cm 33 1 4 in 84 3 cm 58 1 8 in 147 6 cm 74 3 4 in 189 7 cm 91 1 4 in 231 9 cm 107 7 8 in 274 1 cm 126 1 8 in 320 4 cm 132 3 4 in 337 3 cm 2012 3M All Rights Reserved 3M Mobile Projector MP300 Adjusting the Focus After you find a place for the projector rotate the focus wheel to sharpen the image TEXAS INSTRUMENTS Adjusting the Brightness and Contrast settings You can use the projector brightness and contrast settings to adjust the image based on the lighting conditions Adjusting the Brightness Adjust the brightness setting until details in
26. video and music during playback 7 Volume Down Decreases the audio volume 8 Lamp ON OFF Turn off the projector lamp while keeping projector power on 9 Menu Button Press to open the projector menu 10 Home Button Press to open the Home screen on the MHL enabled device 11 Fast Forward Advances video music playback 12 Play Pause Start or Pause video or music playback 13 Volume Up Increases the audio volume 14 Info Button Opens the projector information window and is the select button when the projector menu is open 15 Options View more options on the MHL enabled device 3M Mobile Projector MP300 Getting Started In the following section charge the projector s battery and turn on the projector Power Adapter The power adapter is used to charge the battery or power the projector There are four outlet adapters When the power adapter is first shipped it is fitted with a blank outlet adapter This must be removed before installing an outlet adapter Installing an Outlet Adapter 1 Press the PUSH button on the underside of the power adapter 2 Remove the blank outlet adapter by sliding up tx C 2 3 Select the outlet adapter that will plug into your wall outlet and align to the power adapter 14 2012 3M All Rights Reserved 3M Mobile Projector MP300 Charging the Battery The rechargeable battery in 3M Mobile Projector MP300 gives you up to three hours
Download Pdf Manuals
Related Search