User manual Height adjustable FELDER working table FAT 300
Contents
1. of maintenance and must not be taken apart by the user Height adjustable FELDER working table FAT 300 Annex 8 Annex Declaration of Conformity EG Declaration of Conformity According to Machine Guidelines 2006 42 EG We hereby declare that the machine indicated below which corresponds to the design and construction of the model we placed on the market conforms with the health and safety requirements as stated by the EC Manufacturer Felder KG KR FELDER STR 1 A 6060 Hall in Tirol Product designation Height adjustable FELDER working table Make FELDER Model designation FAT 300 The following EC guidelines were applied 2006 42 EG This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine Modifying or altering the machine without the express written agreement of the manufacturer shall render the warranty null and void The signatory of this statement is the appointed agent for the compilation of the technical information Jem ete NT Johann Felder Managing Director FELDER KG Hall in Tirol 1 6 2014 KR FELDER STR 1 e A 6060 Hall in Tirol FELDER Felder KG KR FELDER STR 1 A 6060 Hall in Tirol Tel 43 0 5223 58 500 Fax 43 0 5223 56 130 Email info felder group com Internet www felder group com2. with parts and original accessories from the manufacturer N Attention Any use outside of the machine s intended purpose shall be considered improper and is therefore not permitted All claims regarding damage resulting from improper use that are made against the manufac turer and its authorised representatives shall be rejected The operator shall be solely liable for any damage that results from improper use of the machine 2 2 Manual contents All those appointed to work on or with the machine must have fully read and understood the manual before commencing any work This requirement must be met even if the appointed person is familiar with the operation of such a machine or a similar one or has been trained by the manufacturer Knowledge about the contents of this manual is a prere quisite for protecting personnel from hazards and avoi ding mistakes so that the machine may be operated in a safe and trouble free manner It is recommended that the operator requests proof from the personnel that the contents of the manual have been read and understood 2 3 Making changes and modifications to the machine In order to minimise risks and to ensure optimal perfor mance it is strictly prohibited to alter retrofit or modify the machine in any way without the express consent of the manufacturer All the pictograms signs and labels affixed to the machine must be kept visible readable and may not be removed Pictograms sig
3. FELDER User manual Translation Height adjustable FELDER working table FAT 300 e Please Note You can download the manual in your local language here www felder group com e gt e Keep this manual handy and good condition for continual reference Dok ID 420240 903 02 Englisch 2014 07 15 FE LDER Height adjustable FELDER working table LLL FAT 300 A 6060 HALL in Tirol KR Felder StraBe 1 FELDER s Austria Tel 43 0 5223 58500 Fax 43 0 5223 56130 info felder at www felder at TYPE FAT 300 C I NR V PH KW S1 Baujahr year of construction ANNEE DE CONSTR 2014 ARBEITSTISCH working table EIGENGEWICHT net weight 75KG TRAGLAST load capacity MAX 300 KG Made in Austria Attention Risk of material damage The machine must be inspected immediately upon arrival If the machine has been damaged during transport or if any parts are missing a written record of the problems must be submitted to the forwarding agent and a damage report compiled Also be sure to notify your supplier imme diately For the safety of all personnel it is necessary to study this manual thoroughly before assembly and operation This manual must be kept in good condition and should be considered as part of the machine Furthermore the manual must be kept to ha
4. ce with local waste disposal regulations If applicable contract a recycling firm to dispose of the packaging mate rials e Note Help preserve the environment Packaging materials are valuable raw materials and in many cases they can be used again or expediently reprocessed or recycled Height adjustable FELDER working table FAT 300 FELDER Transport packaging and storage 4 4 Storage Keep items sealed in their packaging until they are assembled installed and be sure to observe the stacking and storage symbols on the outside of the packaging Store packed items only under the following conditions Do not store outdoors e When storing for longer than 3 months apply a coat e Store in a dry and dust free environment of oil to all bare machine parts corrosion protection Do not expose to aggressive substances Regularly check the general condition of all parts and e Protect from direct sunlight the packaging If necessary refresh or re apply the e Avoid subjecting the machine to shocks coat of e Storage temperature 10 to 50 anti corrosive agent Maximum humidity 60 e If the machine is to be stored in a damp environment e Avoid extreme temperature fluctuations condensation it must be sealed in air tight packaging and protected build up against corrosion desiccant e Apply a coat of oil to all bare machine parts corrosi on protection 4 5 Transport Attention Risk of material damag
5. e Transport the machine according to the enclosed transport and assembly instructions le 1 Note The transportation width is well under 1000 mm This makes it possible to transport the machine through doorways To facilitate assembly ensure the presence of a minimum of one additional people Individual installation instructions are found with the machine or the worktop surface Fig 4 1 Transport locking device The machine is partly assembled when delivered on the pallet The machine is shipped mounted on a pallet 4 x Secu ring bolt The machine can be transported unloaded with a fork carriage or a forklift truck or with a crane and hoisting loop Securing bolt FE LDER Height adjustable FELDER working table FAT 300 Setup and installation 5 Setup and installation 5 1 Safety instructions Warning Risk of injury Improper assembly and installation can lead to serious physical injury or equipment damage For this reason this work may only be carried out by authorised trained personnel who are familiar with how to operate the machine and in strict observance of all safety instructions e Before assembling and installing the machine check to make sure it is complete and in good condition e Keep the work area orderly and clean Components and tools that are not put in their correct place or put away may be the cause of accidents e Ensure that there is sufficient space to work around th
6. e machine Warning Risk of injury An incomplete faulty or damaged machine can lead to serious physical injury or equipment damage Only assemble and install the machine if the machine and its parts are complete and intact 5 2 Floor space requirement Note Individual installation instructions are found with the machine or the worktop surface mio Installation site requirements e Operation room temperature 10 to 40 C e Ensure that the work surface is sufficiently stable and has the proper load bearing capacity e Provide sufficient light at the workstation e Ensure there is sufficient clearance for or from neighbouring workstations To operate and maintain the machine leave a min of 500 mm space all around the machine Fig 5 1 Space requirements Measurements Height adjustable FELDER working table FAT 300 Operation 6 Operation p Attention Risk of material damage Danger of tipping Only process work pieces that can be securely positioned Load capacity max 300 kg 6 1 Authorised and prohibited work techniques Authorised working techniques Can be used as Machinery equipment vehicle storage assistance stacking cart or additional workspace The following working techniques are prohibited on this machine e Itis strictly forbidden to climb onto the machine danger of falling 6 2 Adjust the working height Attention Risk of material damage When setting the wo
7. ficient load carrying capacity to prevent damage The machine should never be lifted by its protruding e Avoid subjecting the machine to shocks parts e g working table When transporting the machine overseas ensure that Consider the machine s centre of gravity when trans the packaging is airtight and that a desiccant is porting it minimise the risk of it tipping over added to protect the metal parts against corrosion Take measures to prevent the machine from slipping sideways e Ropes belts or other hoisting devices must be equipped with safety hooks e Do not use torn or worn ropes 4 2 Transport inspection Upon arrival inspect the shipment to ensure that it is For all defects that are not discovered upon delivery be complete and has not suffered any damage sure to report them as soon as they are recognised as If any transport damage is visible do not accept the deli damage claims must be filed within a certain period as very or only accept it with reservation Record the scope granted by law of the damage on the transport documents delivery note Initiate the complaint process 4 3 Packaging If no agreement has been made with the supplier to take back the packaging materials help to protect the environ ment by reusing the materials or separating them according to type and size for recycling Attention Dispose of the packaging materials in an environmentally friendly way and always in accordan
8. ges contained in the manual Should any questions arise please contact the manufacturer We reserve the right to make technical modifications to the product in order to further improve user friendliness and develop its functionality Attention Risk of material damage down of the machine If unauthorised spare parts are fitted into the machine all warranty service compensation and liability claims against the manufacturer and their contractors dealers and representatives shall be rejected Non genuine counterfeit or faulty spare parts may result in damage cause malfunction or complete break Use only genuine spare parts supplied by the manufac turer Note The original spare parts that have been authorised for use are listed in a separate spare parts catalo gue enclosed in the documentation package supplied with the machine 1 7 Disposal N Attention Used electrical materials electronic components lubricants and other auxiliary substances must be treated as hazardous waste and may only be disposed of by specialised licensed firms If the machine is to be disposed of separate the compo nents into the various materials groups in order to allow them to be reused or selectively disposed of The whole structure is made of steel and can therefore be dis mantled without problem This material is also easy to dispose of and does not pol lute the environment or jeopardise public health Interna tio
9. l are obliged to immediately report any irregu larities with the machine that might compromise safety to the operator ral safety regulations applicable to the operative range of the machine shall release the manufacturer and their authorised representatives from any liability and from all compensation claims FE LDER Height adjustable FELDER working table Pe 2 FAT 300 Safety 2 7 Personal protective equipment When working on or with the machine the following must be strictly observed Persons with long hair who are not wearing a hairnet are not permitted to work on or with the machine When working on or with the machine the following must always be worn by personnel Protective clothes Sturdy tight fitting clothing tear resistant no wide sleeves no jewellery rings bracelets necklaces Protective footwear To protect the feet from heavy falling objects and prevent sliding on slippery floors 2 8 Machine hazards The machine has undergone a hazard analysis The The machine is considered operationally safe when used design and construction of the machine are based on the properly results of this analysis and correspond to state of the art Nevertheless there are some remaining risks that must be technology considered A Warning Other risks Risk of injury e Risk of injury through being crushed caught e Risk of injury due to insufficient preparation e Do not work if the f
10. loors are still wet or are slippery e tis strictly forbidden to climb onto the machine danger of falling e Consider the machine s centre of gravity when transporting it minimise the risk of it tipping over Height adjustable FELDER working table FAT 300 Technical specifications 3 Technical specifications 3 1 Dimensions and weight Fig 3 1 Dimensions FAT 300 Base dimensions A x max Net weight approx 75 kg Operating room temperature 10 to 40 C Storage temperature 10 to 50 C with worktop surface without worktop surface FE LDER Height adjustable FELDER working table FAT 300 Transport packaging and storage 4 Transport packaging and storage 4 1 Safety instructions p Attention Risk of material damage The machine can be damaged or destroyed if it is subjected to improper handling during transport Warning Risk of injury There is a risk of injury as a result of falling parts while transporting loading or unloading the machine For this reason the following safety instructions must be observed e Never lift loads over a person e Do not use knotted ropes or belts Always move the machine with the utmost care and Ensure that ropes and belts do not lie against sharp caution edges e Only use suitable lifting accessories and hoisting e Transport the machine as carefully as possible in order devices that have a suf
11. nal environmental regulations and local disposal laws must always be complied with FELDER Height adjustable FELDER working table FAT 300 Safety 2 Safety At the time of its development and production the machine was built in accordance with prevailing technological regulations and therefore conforms to industry safety standards However hazards may arise should the machine be operated by untrained personnel used improperly or em ployed for purposes other than those it was designed for The chapter entitled Safety offers an overview of all the important safety considerations necessary to optimise safety and ensure the safe and trouble free operation of 2 1 Intended use The machine described in this manual is intended solely for Machinery equipment vehicle storage assistance sta cking cart or additional workspace Operational safety is guaranteed only when the machine is used for the intended purposes the machine To further minimise risks the other chapters of this manual contain specific safety instructions all marked with symbols Besides the various instructions there are a number of pictograms signs and labels affixed to the machine that must also be heeded These must be kept visible and must not be removed The term proper use also refers to correctly observing the operating conditions as well as the specifications and instructions in this manual The machine may only be operated
12. nd and within the vicinity of the machine so that it is accessible to operators when using maintaining or repairing the machine FELDER A product of the FELDER GROUP Felder KG KR FELDER STR 1 A 6060 Hall in Tirol Tel 43 0 5223 58 500 Fax 43 0 5223 56 13 0 Email infoGfelder group com Internet www felder group com Height adjustable FELDER working table FAT 300 Content Content EET EE 4 T T Symbol legend e rete dee e senke 4 1 2 Information about the manual sss enne 4 23 dees TTD NT 4 1 4 Liability and warranty irit rrr peer tee tcd nere 5 IER HH 5 1 6 Spare parisis ae 5 aR 5 2 Safely Lundestad 6 2 1 Iritended use ee pee ae n ER ERE 6 2 2 Mdn db contents exo eas dnte apa en ML EMI ET 6 2 3 Making changes and modifications to the machine 6 2 4 Responsibilities of the operator eme eene 7 2 5 Personnel requitemehls ee ote Le p Ped E 7 2 6 Work 7 2 7 Personal protective 8 2 8 Machine icut estis paste dapes E ace dpi 8 3 Technical Specilicafi His 9 3 1 Dimension
13. ns and labels that have become damaged or unreadable must be replaced promptly Height adjustable FELDER working table FAT 300 Safety 2 4 Responsibilities of the operator This manual must be kept in the immediate vicinity of the machine and be accessible at all times to all persons working on or with the machine The machine may only be operated if it is in proper working order and in safe condition The general condition of the machine must be controlled and the machine must be inspected for visible defects every time before it is switched on All instruc tions in this manual must be strictly followed without reservation Besides the safety advice and instructions stated in this manual it is necessary to consider and observe local 2 5 Personnel requirements Only authorised and trained personnel may work on and with the machine Personnel must be briefed about all functions and potential dangers of the machine Spe cialist staff is a term that refers to those who due to their professional training know how experience and knowledge of relevant regulations are in a position to assess delegated tasks and recognise potential risks If the personnel lack the necessary knowledge for wor king on or with the machine they must first be trained Responsibility for working with the machine installation service maintenance overhaul must be clearly defined and strictly observed Only those persons who can be expec
14. rking height particularly when lowering be sure that no workpieces or other objects have been placed beneath the table wedging threat The working height can be adjusted continuously bet ween 400 and 1020 mm 1 Wheel lock press in and lock 3 Adjust the working height Operate the lever on the machine frame Push to the bottom Q place to the top Lower the work bench Operate the lever on the machine frame Push slowly to the top up to stop press and hold Q Lower the work bench Work bench 4 solid rubber rollers with locks Q Foot pedal e Note Avoid jerky movements Operate the lever on the machine frame gt up to stop FE LDER Height adjustable FELDER working table FAT 300 Service 7 Service Cleaning the machine e Note Generally there is no lubrication necessary because the ball bearings are free of maintenance The guiding systems are completely maintenance free and do not require the addition of lubricants We recommend that dust and chips are cleaned off the machine if required especially from the table surfaces Using the glue Solvent amp press cleaner it is easy to re move all glue residues from tools and machine parts Never use caustic or abrasive detergents Cleaning and care products are available as accessories Felder catalogue Fig 7 1 Remove dust and shavings p Attention Risk of material damage The lift cylinder is free
15. rning Risk of injury or death This symbol marks instructions that must be followed in order to avoid harm to one s health injuries perma nent impairment or death Attention Risk of material damage or machine breakdown This symbol marks instructions which if not observed may lead to material damage functional failures and Note mio on of the machine 1 2 Information about the manual This manual describes how to operate the machine properly and safely Be sure to follow the safety tips and instructions stated here as well as any local accident prevention regulations and general safety regulations Before beginning any work on the machine ensure that the manual in particular the chapter entitled Safety and the respective safety guidelines has been read in its entirety and fully understood This manual is an integral part of the machine and must therefore be kept in the 1 3 Copyright This manual should be handled confidentially It is designated solely for those persons who work on or with the machine All descriptions texts drawings photos and other depictions are protected by copyright and other commercial laws Illegal use of the materials is punishable by law This symbol marks tips and information which should be observed to ensure efficient and failure free operati direct vicinity of the machine and be accessible at all times If the machine is sold rented lent or otherwise tran
16. s and as kEa EEE ERT E 9 A Transport packaging and storage rato puer ri eve neee 10 AN Safety Instructions dre ade tess ee dinge 10 4 2 Transport inspection wus esce b ee a epp ct op Orte y IE CURE e ns 10 4 3 Packaging iet orti tetto dade bodes Dese s ARE QR a adm de dE 10 4 4 SIOFQB ice ee Eta IL tence SURE dE 11 4 5 Transpott eee ceti bee xa Geb ae OR ation me Doe HO edo etes 11 5 Setup and installation uassonasaasmnmmnanmgememmnnnenumnnnada 12 5 1 Safely instructions cierre ra rire d re LEE ERR ERN SHE Rte 12 5 2 Floor spa ce requirement ioc eco the bec he Feet OE e tes e ke Ue OE Re tete d ek E REN anta 12 pre IIR 13 6 1 Authorised and prohibited work techniques se e 13 6 2 Adjust the working height o Fete dert ter o eek e einn 13 7 Service Cleaning the eeeee ennenen eenn 14 8 Annex Declaration of Conformity eerte eere 15 FELDER Height adjustable FELDER working table FAT 300 General 1 General 1 1 Symbol legend Important technical safety instructions in this manual are marked with symbols These instructions for work safety must be followed In all these particular cases special attention must be paid in order to avoid accidents injury to persons or material damage N Wa
17. sferred to another party the manual must accompany the machine This manual in its entirety or parts thereof may not be transferred to third parties or copied in any way or form and its contents may not be used or otherwise communicated without the express written consent of the manufacturer Infringement of these rights may lead to a demand for compensation or other applicable claims We reserve all rights in exercising commercial protection laws Height adjustable FELDER working table FAT 300 General 1 4 Liability and warranty The contents and instructions in this manual have been compiled in consideration of current regulations and state of the art technology as well as based on our know how and experience acquired over many years This manual must be read carefully before commencing any work on or with this machine The manufacturer shall not be liable for damage and or faults resulting from the dis regard of instructions in the manual The text and images do not necessarily represent the delivery contents The images and graphics are not depicted on a 1 1 1 5 Warranty notice The guarantee period is in accordance with national guidelines Details may be found on our website www felder group com 1 6 Spare parts scale The actual delivery contents are dependent on custom build specifications add on options or recent technical modifications and may therefore deviate from the descriptions instructions and ima
18. ted to carry out their work reliably may be given permission to work on or with the machine Personnel must refrain from working in ways that could harm others the environment or the machine itself It is absolu 2 6 Work safety Following the safety advice and instructions given in this manual can prevent bodily injury and material damage while working on and with the machine Failure to observe these instructions can lead to bodily injury and damage to or destruction of the machine Disregard of the safety advice and instructions given in this manual as well as the accident prevention regulations and gene accident prevention regulations general safety regula tions as well as current environmental stipulations that apply to the operational range of the machine The operator and designated personnel are responsible for the trouble free operation of the machine as well as for clearly establishing who is in charge of installing servicing maintaining and cleaning the machine Machines tools and accessories must be kept out of the reach of children tely forbidden for anyone who is under the influence of drugs alcohol or reaction impairing medication to work on or with the machine When appointing personnel to work on the machine it is necessary to observe all local regulations regarding age and professional status The user is also responsible for ensuring that unauthorised persons remain at a safe distance from the machine Personne
Download Pdf Manuals
Related Search