Home

User`s Manual - CNET Content Solutions

Contents

1. Figure 4 6 Removing the AccuPoint cap 2 Position a new cap on the peg and press it into place T The peg is square so be careful to align the cap s square hole with the peg Stylus Pen and Reserve Pen You can use the pen to execute actions and enter data Hold the pen in a natural position and tap press or trace on the screen lightly User s Manual 4 6 A User s Manual Figure 4 7 Stylus Pen aE a o Figure 4 8 Reserve Pen NI 1 Pen point 3 Eraser button 2 Pen button Pen point Provides the same function as left clicking the mouse once Pen button Provides the following function H_ Right clicking Press and hold this button and touch the tip of the pen to an object Immediately lift it to display a pop up menu or other actions It functions as right clicking the mouse once Eraser button You can use this button as an eraser in some applications that support eraser function These applications enable you to select and delete notes or sketches with a one touch action You can choose to enable disable the Pen button or the Eraser button function in Pen Options To access it click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Pen and Touch gt Pen Options Observe the following precautions on the handling of the Stylus Pen and the Reserve Pen Do not apply excess force when cleaning the touch screen T User s Manual In order to avoid damages to the
2. The SDXC memory card logo is 2 E The maximum capacity of SD memory cards is 2GB The maximum capacity of SDHC memory cards is 32GB The maximum capacity of SDXC memory cards is 64GB Memory media format New media cards are formatted according to specific standards If you wish to reformat a media card be sure to do so with a device that uses media cards Formatting a memory media card Memory media cards are sold already formatted in conformity to specific standards If you reformat a memory card be sure to reformat it with a device such as digital camera or digital audio player that uses the memory cards not with the format command provided within Windows i Should you need to format all areas of the memory card including the J protected area you will need to obtain an appropriate application that applies the copy protection system Media care Observe the following precautions when handling the card User s Manual 4 23 H Do not twist or bend cards Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid H Do not touch the metal part of a card or expose it to liquids or let it get dirty m After using card return it to its case The card is designed so that it can be inserted only one way Do not try to force the card into the slot H Do not leave a card partially inserted in the slot Press the card until you hear it click into place H Set the write prot
3. 1 If you have entered data either save it to the Solid State Drive or to other storage media 2 Make sure all disk disc activity has stopped before removing the disk disc m fyou turn off the power while a disk disc is being accessed you may lose data or damage the disk m Never turn off the power while an application is running Doing so could cause loss of data m Never turn off the power disconnect an external storage device or remove storage media during data read write Doing so can cause data loss 3 Click the Settings charm 4 Click Power and then select Shut down 5 Turn off any peripheral devices connected to your computer Do not turn the computer or peripheral devices back on immediately wait a short period to avoid any potential damage Restarting the computer Certain conditions require that you reset the computer for example if m You change certain computer settings If you need to restart the computer there are two ways this can be achieved m Inthe Settings charm click Power and then select Restart m Press CTRL ALT and DEL simultaneously once on the keyboard to display the menu window and then select Restart by clicking the power icon O in the lower right corner Sleep Mode User s Manual If you have to interrupt your work you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode In this mode data is maintained in the computer
4. The password is necessary only if the computer was shut down in Hibernation mode or boot mode It is not needed in Sleep mode and Restart To enter a password manually follow the steps as detailed below 1 Turn on the power as described in the Getting Started section The following message will appear in the screen Enter Password At this point the function keys do not work They will function after you enter the password 2 Enter the Password A 3 Press ENTER If you enter the password incorrectly three times in a row or if you don t enter the password within 1 minute the computer shuts off In this case some features that can power on the computer automatically Wake up on LAN Task Scheduler etc may not work You must turn the computer back on to retry password entry TOSHIBA System Settings User s Manual TOSHIBA System Settings is the TOSHIBA configuration management tool available through the Windows operating system To run TOSHIBA System Settings click Desktop gt Desktop Assist gt Tools amp Utilities gt System Settings The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured In addition there are also three buttons OK Cancel and Apply OK Accepts your changes and closes the TOSHIBA System Settings window Cancel Closes the window without accepting your changes Apply Accepts all your changes without closing the
5. before the equipment certification number only signifies that the Industry Canada technical specifications were met USA Federal Communications Commission FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation Refer to the FCC information section for the detailed information This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter The radiated output power of the Wireless device is far below the FCCradio frequency exposure limits Nevertheless the Wireless device shall beused in such a manner that the potential for human contact during normal operation is minimized The radiated output power of the Wireless device is far below the FCCradio frequency exposure limits Nevertheless the Wireless device shall beused in such a manner that the potential for human contact during normal operation is minimized In the usual operating configuration the distance between the antenna and the user should not be less than 20cm Please refer to the computer user s manual for the details regarding antenna location The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the genera
6. Wireless communication 7 4 User s Manual Index 3
7. Graphics processing unit GPU performance may vary depending on product model design configuration applications power management settings and features utilized GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode Total Available Graphics Memory is the total of as applicable Dedicated Video Memory System Video Memory and Shared System Memory Shared System Memory will vary depending on system memory size and other factors Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment obstacles access point design and configuration and client design and software hardware configurations The actual transmission speed will be lower than the theoretical maximum speed Copy Protection Applicable copy protection standards included in certain media may prevent or limit recording or viewing of the media Glossary User s Manual The terms in this glossary cover topics related to this manual Alternate naming is included for reference Abbreviations AC Alternating Current AMT Intel Active Management Technology ASCII American Standard Code for Information Interchange BIOS Basic Input output System BD ROM Blu ray Disc Read only Memory bps bits per second CD Compact Disc CD ROM Compact Disc Read only Memory CD RW Compact
8. Intel Rapid Start Technology is enabled at factory default The computer will switch to Hibernation Mode after two hours of Sleep Mode You can launch the BIOS setup utility to enable disable the function and change the specified time setting from Sleep Mode to Hibernation Mode 1 Launch the BIOS setup utility Please refer to TOSHIBA Setup Utility section for further information 2 Select Power Management Enable Disable Intel R Rapid Start Technology function 4 You can select the period of time from Sleep Mode to Hibernation Mode using Rapid Start Entry after If the Immediately option is selected the computer will switch to Hibernation Mode immediately after your computer goes into the Sleep Mode G 1 E When Intel Rapid Start Technology is enabled switching from Sleep Dl Mode to Hibernation Mode consumes power When you carry your computer aboard on an aircraft or in places where electronic devices are regulated or controlled always power off your computer E When Intel Rapid Start Technology is enabled Wake up on LAN Wake up on USB or Wake up from Sleep Mode automatically functions are not available when the computer has been switched from Sleep Mode to Hibernation Mode m The Windows cannot be restored normally if the battery is exhausted when the computer is moving from Sleep Mode to Hibernation Mode E The partition allocation on the Solid State Drive for the Intel Rapid Start Technology cannot be dele
9. Markings appear on These marks may have come from contact with the the computer s keyboard and Touch Pad while the display panel display panel has been closed You should try to remove the marks by gently wiping the display panel with a clean dry cloth or if this fails with a good quality LCD screen cleaner In this latter instance you should always follow the instructions with the screen cleaner and always ensure you let the display panel dry properly before closing it Solid State Drive Problem Procedure Computer does not Check to see whether there is a disc in the optical boot from Solid State disc drive if so remove it and try to start the Drive computer again User s Manual 6 7 Problem Slow performance Memory Media Card Procedure The files on the Solid State Drive may be fragmented in this instance you should run the disk Defragmentation utility to check the condition of your files and the Solid State Drive Please refer to the operating system s documentation or online Help File for further information on operating and using the Defragmentation utility As a last resort you should reformat the Solid State Drive and then reload the operating system and all other files and data If you are still unable to resolve the problem contact TOSHIBA Support For further information please refer to Operating Basics Problem Memory media card error occurs You cannot write to a memory media card You canno
10. TOSHIBA System Settings window Some options shown in grey are possible to confirm their status TOSHIBA System Settings screen may have the following tabs H General Allows you to view the current BIOS version or change certain settings back to their default values m CPU Allows you to set conditions for the CPU H Display Allows you to select the internal LCD and or external monitor when the computer boots up Boot Options Allows you to change the sequence in which your computer searches the drives for the operating system USB Allows you to set conditions for USB SATA Allows you to set conditions for SATA LAN Allows you to set conditions for LAN Undock and Sleep Allows you to set sleep conditions while undocking Advanced Options Allows you to set conditions for a specific device or function The settings or options explained here may vary depending on the model you purchased After you changed the settings a dialog box may appear to prompt you that the changes will take effect after the computer is restarted Make sure to restart your computer immediately to apply these changes TOSHIBA Media Player by sMedio TrueLink Please be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink Notes on use User s Manual This software is a multimedia player which can be used to play back video music and photo However some files may not be able to play back normall
11. The crossed out wheeled dust bin symbol indicates that batteries and or accumulators must be collected and disposed of separately from household waste If the battery or accumulator contains more than the specified values of lead Pb mercury Hg and or cadmium Cd defined in the Battery Directive 2006 66 EC then the chemical symbols for lead Pb mercury Hg and or cadmium Cd will appear below the crossed out wheeled dust bin symbol By participating in separate collection of batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website http eu computers toshiba europe com or contact your local city office or the shop where you purchased the product These symbols may not stick depending on the country and region where you purchased REACH Compliance Statement The new European Union EU chemical regulation REACH Registration Evaluation Authorization and Restriction of Chemicals entered into force on 1 June 2007 TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation Please consult the following website www toshiba europe com computers info reach fo
12. and to authorize others to exercise some or all of the rights granted herein subject to the following conditions H Redistribution of source code must retain this license file FTL TXT unaltered any additions deletions or changes to the original files must be clearly indicated in accompanying documentation The copyright notices of the unaltered original files must be preserved in all copies of source files H Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team in the distribution documentation We also encourage you to put an URL to the FreeType web page in your documentation though this isn t mandatory These conditions apply to any software derived from or based on the FreeType Project not just the unmodified files If you use our work you must acknowledge us However no fee need be paid to us 3 Advertising Neither the FreeType authors and contributors nor you shall use the name of the other for commercial advertising or promotional purposes without specific prior written permission We suggest but do not require that you use one or more of the following phrases to refer to this software in your documentation or advertising materials FreeType Project FreeType Engine FreeType library or FreeType Distribution As you have not signed this license you are not required to accept it However as the FreeType Proje
13. and your email while you are away from the office Installing a SIM Card To install a SIM card follow the steps as detailed below 1 Click Power in the Settings charm and then click Shut down and ensure that the Power indicator is off 2 Remove the AC adaptor and all cables and peripherals connected to the computer 3 Locate the SIM card slot 4 To pop the SIM card tray partially open insert a slender object about 10mm such as a straightened paper clip into the eject hole Gently pull to open the SIM card tray A Never pull the SIM card tray completely out of the slot Figure 4 14 Open the SIM card tray P o 1 Slender object Diameter 0 8mm 2 SIM card tray Product appearance depends on the model you purchased 5 Place the SIM card into the SIM card tray with the metal connectors facing up User s Manual 4 19 6 Insert the SIM card tray into the SIM card slot and push the center of the tray to close it Press gently until it locks into place Figure 4 15 Inserting the SIM card es ce A w 5 1 SIM card slot 3 SIM card tray 2 SIM card Product appearance depends on the model you purchased A m Never allow metal objects such as screws staples and paper clips to enter the computer Foreign metal objects can create a short circuit which can cause computer damage and fire possibly resulting in serious injury E Do not touch the connectors on the SIM card or on the computer Debris on the co
14. purchased Battery pack This computer includes a battery pack inside However please do not attempt to dismount or replace it by yourself Please contact an authorized TOSHIBA service provider if necessary The rechargeable lithium ion battery pack provides power to the computer when the AC adaptor is not connected For more detailed information on the use and operation of the battery pack please refer to the Battery section Legal Footnote Battery Life For more information regarding Battery Life please refer to the Legal Footnotes section CPU Legal Footnote CPU The processor type varies depending on model To check which type of processor is included in your model open the TOSHIBA PC Health Monitor by clicking Desktop gt Desktop Assist gt Support amp Recovery gt PC Health Monitor and then click PC Information For more information regarding CPU please refer to the Legal Footnotes section Solid State Drive The capacity of the Solid State Drive varies depending on the model To check which type of SSD is included in your model open the TOSHIBA PC Health Monitor by clicking Desktop gt Desktop Assist gt Support amp Recovery gt PC Health Monitor and then click PC Information Please note that part of the Solid State Drive s overall capacity is reserved as administration space 3 E n this manual the word HDD or Hard disk drive also refers to the SSD unless oth
15. 2048 x 2048 pixels This app doesn t support DMS Operating TOSHIBA Media Player by sMedio TrueLink The steps for playing a video file on a local library 1 Click My Local Library on the Start Page of TOSHIBA Media Player 2 Click a video file to playback The steps for playing a music file on a local library 1 Click My Local Library on the Start Page of TOSHIBA Media Player 2 Click Music in the upper left corner of the screen 3 Select an artist icon or album icon for playback 4 Click a music file to playback The steps for playing a photo file on a local library 1 Click My Local Library on the Start Page of TOSHIBA Media Player 2 Click Photos in the upper left corner of the screen 3 Select a folder icon or date icon for playback 4 Click a photo file to playback Opening TOSHIBA Media Player by sMedio TrueLink Manual The features and operations about TOSHIBA Media Player are explained in the TOSHIBA Media Player Manual Use the following procedure to open TOSHIBA Media Player Manual Click the Tutorials icon on the Start Page of TOSHIBA Media Player Use the following procedure to open TOSHIBA Media Player Online help When TOSHIBA Media Player is running click Help of the Settings charm TOSHIBA PC Health Monitor User s Manual The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption battery health and the system cooling informing you of
16. CAPS LOCK indicator 1 CAPS LOCK indicator CAPS LOCK Function Key User s Manual This indicator glows green when letter keys are locked into their uppercase format The function keys F1 F12 are the twelve keys at the top of your keyboard P gt fF E T y P IE E F lf JE F FIO F Fr 4 U z T J X T The following specific functions are executed when the function keys are pressed in combination with the FN key Key Combination FN F1 FN F2 FN F3 FN F4 FN F5 FN F6 FN F7 FN F8 FN F9 FN F10 FN F11 FN F12 FN ESC FN 1 FN 2 Function Enters Lock computer mode To restore your desktop you need to log on again Changes the power settings Switches the system to Sleep Mode Switches the system to Hibernation Mode Changes the active display device To use a simultaneous mode you must set the resolution of the internal display panel to match the resolution of the external display device Decreases the computer s display panel brightness in individual steps Increases the computer s display panel brightness in individual steps Turns the Airplane mode on or off Enables or disables the Touch Pad Turns on Arrow Mode Turns on Numeric Mode Locks the cursor on a specific line Turns the sound on or off Reduces the icon size on the desktop or the font sizes within
17. CAT3 or CAT5 cable If you are using Fast Ethernet LAN 100 megabits per second 100BASE TX be sure to connect with a CAT5 cable or higher You cannot use a CATS3 cable If you are using Ethernet LAN 10 megabits per second 10BASE T you can connect with a CAT3 or higher cable Connecting the LAN cable To connect the LAN cable follow the steps as detailed below AN Connect the AC adaptor before connecting the LAN cable The AC adaptor must remain connected during LAN use If you disconnect the AC Adaptor while the computer is accessing a LAN the system may hang up Do not connect any power supplying device to the LAN cable that is connected to the LAN jack Otherwise malfunctions or damage may occur 1 Turn off the power to all external devices connected to the computer User s Manual 4 21 2 Plug one end of the cable into the LAN jack Press gently until you hear the latch click into place Figure 4 16 Connecting the LAN cable 1 LAN jack 2 LAN cable 3 Plug the other end of the cable into a LAN hub connector or router Check with your LAN administrator and hardware or software vendor before using or configuring a network connection Memory media The computer is equipped with a memory media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices such as digital cameras and Personal Digital Assistants AN Keep foreign objects ou
18. Keyboard Dock and support dual operating mode your computer can be easily converted from a tablet PC to a laptop PC Throughout this manual operating your computer as a tablet PC and a laptop PC is called tablet mode and laptop mode respectively User s Manual Series Model Name Operating Mode Supported PORT G Z10t A E Laptop mode when TOSHIBA Keyboard Dock is docked E Tablet mode when TOSHIBA Keyboard Dock is undocked WT310 Tablet mode only Conventions This manual uses the following formats to describe identify and highlight terms and operating procedures SSD or Solid State This computer is equipped with a Solid State Drive Drive SSD Click E Tap the Touch Pad or click the left Touch Pad control button once laptop mode Left click the mouse once m Tap the touch screen once Right click H Click the right Touch Pad control button once laptop mode H Right click the mouse once E Press and hold on the touch screen Double click E Tap the Touch Pad or click the left Touch Pad control button twice laptop mode m Left click the mouse twice m Tap the touch screen twice Charm By swiping in from the right edge of the touch screen or pointing the mouse pointer to the lower right or upper right corner of your screen you will find a list of charms Search Share Start Devices and Settings Desktop Click the Desktop tile from the Start screen to access the desktop Start screen You can go to th
19. Shut Down Mode Battery pack about 4 days about 70 days RTC battery about 30 days about 30 days Extending battery life User s Manual To maximize the life of your battery packs At least once a month disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges Before doing so follow the steps as detailed below 1 Turn off the computer s power 2 Disconnect the AC adaptor and turn on the computer s power if it does not turn on then go to Step 4 3 Operate the computer on battery power for five minutes If you find that the battery pack has at least five minutes of operating time continue operating until the battery pack is fully discharged however if the Battery indicator flashes or there is some other warning to indicate a low battery condition go to Step 4 4 Connect the AC adaptor to the DC IN 19V jack of the computer and to a wall outlet that is supplying power The Battery indicator should glow amber to indicate that the battery pack is being charged however in the event that Battery indicator does not glow this indicates that power is not being supplied check the connections for the AC adaptor and the power cord 5 Charge the battery pack until the Battery indicator glows white Wireless WAN Device Some computers are equipped with the Wireless WAN device This device gives you the ability for a high speed connection to the Internet corporate intranet
20. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor m Never plug the AC adaptor into a power source that does not correspond to both the voltage and the frequency specified on the regulatory label of the unit Failure to do so could result in a fire or electric shock possibly resulting in serious injury Always use or purchase power cables that comply with the legal voltage and frequency specifications and requirements in the country of use Failure to do so could result in a fire or electric shock possibly resulting in serious injury The supplied power cord conforms to safety rules and regulations in the region the computer is bought and should not be used outside this region For use in other regions please buy power cords that conform to safety rules and regulations in the particular region Do not use a 3 pin to 2 pin conversion plug When you connect the AC adaptor to the computer always follow the steps in the exact order as described in the User s Manual Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched As a general safety precaution avoid touching any metal parts Never place your computer or AC adaptor on a woode
21. User s Manual Display screen Legal Footnote LCD 29 5cm 11 6 LCD screen configured with the following resolutions E FHD 1920 horizontal x 1080 vertical pixels Please be aware that when the computer is operating on the AC adaptor the image displayed on the internal screen will be somewhat brighter than when it operates on battery power This difference in brightness levels is intended to save power when operating on batteries For more information regarding LCD please refer to the Legal Footnotes section Web Camera front Web Camera is a device that allows you to record video or take photographs with your computer You can use it for video chatting or video conferences using a communication tool Do not point the web camera directly at the sun Do not touch or press strongly on the web camera lens Doing so may reduce image quality Use an eyeglass cleaner cleaner cloth or other soft cloth to clean the lens if it becomes dirty Web Camera LED front Ambient light sensor The Web Camera LED glows when the Web Camera is operating Ambient light sensor can detect the light quality and intensity outside and can use this information to automatically adjust the display screen brightness Do not cover the ambient light sensor otherwise it may not work properly Microphone Windows button Power button The built in microphone allows you to import and record sounds for your application please
22. a broken pen tip as this may result in scratching of the display panel When the pen tip breaks replace it with one of the refills User s Manual 4 10 delivered with the Stylus Pen When these refills have run out you can purchase a new pen set from a TOSHIBA authorized dealer E A short and worn pen point is difficult to pull out Replace the pen point with a refill before it becomes too short to remove E tis recommended that you keep another pen set as a spare You can buy replacement pen sets from your TOSHIBA authorized dealer The Keyboard A The keyboard layouts on the keyboard dock are compatible with a 104 105 key enhanced keyboard by pressing some keys in combination all of the 104 105 key enhanced keyboard functions can be performed on the computer The number of keys available on your keyboard will depend on which country region your computer is configured for with keyboards being available for numerous languages In use there are different types of keys specifically typewriter keys function keys soft keys Windows special keys and the keypad overlay Never remove the key caps on your keyboard Doing so could cause damage to the parts under the key caps Keyboard indicator User s Manual The following figure shows the position of the CAPS LOCK indicator which shows the following conditions When the CAPS LOCK indicator glows the keyboard will produce capitals when any letter is typed Figure 4 12
23. a multimedia player which can be used to play back video music and photo TOSHIBA Media Player can play back contents on a local library nome network SkyDrive To access it click the Media Player icon on the Start screen For details please refer to the Tutorial This utility allows you to perform some features by pressing a specified key or combined with the FN key To setup this utility click Desktop gt Desktop Assist gt Tools amp Utilities gt Function Key For details please refer to the Function Key section This application allows your computer to automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs When enabled this application periodically transmits to our servers a limited amount of system information which will be treated in strict accordance with the rules and regulations as well as applicable data protection law To access this utility click Desktop gt Desktop Assist gt Support amp Recovery gt Service Station i TOSHIBA PC Health The TOSHIBA PC Health Monitor application Monitor proactively monitors a number of system functions such as power consumption battery health and system cooling informing you of significant system conditions This application recognizes the system and individual component serial numbers and will track specific activities related to their usage To access this utilit
24. by using the following steps 1 Select either blank disc or USB Flash Memory The application will allow you to choose from a variety of different media onto which the recovery image can be copied including disc media and USB Flash Memory Please note that some of the disc media may not be compatible with the optical disc drive connected to your computer You should therefore verify the optical disc drive supports the blank media you have chosen before proceeding USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding Turn on your computer and allow it to load the Windows operating system from the Solid State Drive as normal Insert the first blank disc into the optical disc drive tray or insert the USB Flash Memory into one available USB port Click Desktop gt Desktop Assist gt Support amp Recovery gt Recovery Media Creator After Recovery Media Creator starts select the type of media and the title you wish to copy and then click the Create button Restoring the pre installed software from your created Recovery Media A User s Manual If the pre installed files are damaged you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it To perform this restoration follow the steps below m When you reinstall the Windows operating system the SSD will be reformatted and all data will be l
25. clicks into place Figure 4 10 Inserting the Reserve Pen ak 1 Reserve Pen slot 2 Reserve Pen Pen actions You can use the Stylus Pen or the Reserve Pen to enter data start programs move objects and execute other actions User s Manual 4 9 Single tap Lightly tap the tip of the pen on an object and lift it immediately to execute an action A single tap is similar to left clicking the mouse once Double tap Lightly tap the tip of the pen twice on an object and lift it immediately to execute an action A double tap is similar to left clicking the mouse twice Press and hold Touch the tip of the pen to the display screen and hold it there to display a pop up menu or other action Press and hold is similar to right clicking the mouse Drag Touch the pen on the screen Without lifting the pen drag it across the screen to select text or objects Drag and drop Touch the pen on the screen to select an object Without lifting the pen drag it across the screen Lift the pen to drop the object to a new location Replacing the pen tip The pen tip of the Stylus Pen can be replaced with a new one which is provided when it is worn To replace the pen tip follow the steps as described below 1 Pinch the tip with a draw out tool and pull it out 2 Insert a new pen tip into the Stylus Pen carefully and press it securely Figure 4 11 Replacing the pen tip AL Y 1 Pen tip 2 Draw out tool Do not continue to use
26. death or serious injury if you do not follow instructions A caution informs you that improper use of equipment or failure to follow instructions may cause data loss equipment damage or may result in minor or moderate injury Please read A note is a hint or advice that helps you make best use of your equipment Chapter 2 Getting Started A This chapter provides an equipment checklist and basic information to start using your computer Some of the features described in this manual may not function properly if you use an operating system that was not pre installed by TOSHIBA Equipment checklist Carefully unpack your computer taking care to save the box and packaging materials for future use Hardware 7 Check to make sure you have all the following items TOSHIBA Portable Personal Computer TOSHIBA Keyboard Dock provided with some models Stylus Pen provided with some models Reserve Pen included in the pen slot with some models AC adaptor and power cord 2 pin plug or 3 pin plug H Cleaning cloth provided with some models Stylus Pen is included together with spare pen tips and a tip removal tool in the small case coming with the product Documentation m 2Z10 A Quickstart or WT310 Quickstart H Instruction Manual for Safety and Comfort Warranty information If any of the items are missing or damaged contact your dealer immediately Dual operating mode Some models are provided with a TOSHIBA
27. display screen please refrain from doing anything other than the specified operation methods Failure to do so could cause a malfunction or characteristic deterioration Do not tap or press the pen forcefully against the display as this could damage the pen and the screen itself Avoid using or keeping the pen in areas where the temperature can change rapidly or in places such as a car where the pen is exposed to direct sunlight Store the pen without any pressure being applied to the buttons Failure to do so could cause a malfunction or characteristic deterioration The pen is composed of precision parts Do not drop the pen Strong impact causes a malfunction or characteristic deterioration Do not apply excessive force to the pen point and the side buttons Excessive force applied to these parts causes short life or characteristic deterioration Avoid water entering the pen or condensation forming within it as either condition will cause a malfunction Do not disassemble the pen It causes maladjustment or short life Do not stain the pen with cosmetics or chemicals as this will cause a deterioration in appearance Use a glass wiping cloth or dry cloth to clean the pen Do not use volatile liquids such as alcohol thinner or petroleum benzine to clean the pen Do not apply excessive force to the pen point as a bent or deformed pen point will cause a malfunction Keep the small parts of the pen such as the pen point or the knob
28. gt Tools amp Utilities gt Display Utility For details on Desktop Text Size utility and Split Screen utility see the help file This utility allows you to set a password in order to restrict access to the computer To access this utility click Desktop gt Desktop Assist gt Tools amp Utilities gt Password Utility This utility allows you to customize your hardware settings according to the way you work with the computer and the peripherals you use To access this utility click Desktop gt Desktop Assist gt Tools amp Utilities gt System Settings TOSHIBA eco Utility TOSHIBA Media Player by sMedio TrueLink TOSHIBA Function Key TOSHIBA Service Station User s Manual This computer is equipped with eco mode This mode slightly lowers performance of some devices to reduce electric power consumption You can realize measurable power savings by using it continuously TOSHIBA eco Utility helps control the power consumption of your computer Various information can help you understand your degree of contribution to the environment Furthermore this utility contains Peak shift function that can help reduce power usage during periods of peak demand by shifting some power consumption to periods when demand is lower To access this utility click Desktop gt Desktop Assist gt Tools amp Utilities gt eco Utility For details on TOSHIBA eco utility see the help file This software is
29. held in your forearm m Do not use the computer while walking or driving a car Do not expose the computer to rapid temperature changes such as would be the case if you brought the computer from a cold environment into a warm room When rapid temperature changes are unavoidable leave the computer for around two hours before turning it on to prevent the formation of condensation E Remove all external peripheral devices and their connection cables from the computer before carrying H Do not drop the computer or apply excessive impact to it Do not leave the tablet in a car or similar environment where it is exposed to direct sunlight User s Manual 4 1 The display panel with some models works as a touch sensitive digitizer screen However the outer edges of the screen may be less sensitive Please keep the Stylus Pen or the Reserve Pen inside the display area when you use it near the edges of the display panel The position of the pen may not be recognized if you move the pen too fast towards the outer edge Please be sure to slide the pen slowly in areas near the edges of the screen Use the pen in the areas enclosed by the dotted line as shown in the following figure Figure 4 2 Use area of the pen Changing the screen orientation User s Manual When operating the computer in tablet mode you can change the screen orientation to Portrait mode by rotating the computer sideways The screen orientation automatically changes acco
30. it to malfunction Cleaning the computer To help ensure long trouble free operation keep the computer free of dust and dirt and use care with all liquids around it H Be careful not to spill liquids into the computer If the computer does get wet turn the power off immediately and let the computer dry completely in these circumstance you should get the computer inspected by an authorized service provider in order to assess the scope of any damage H Clean the plastics of the computer using a slightly water dampened cloth User s Manual 1 14 You can clean the display screen by spraying a small amount of glass cleaner onto a soft clean cloth and then wiping the screen gently with the cloth Never spray cleaner directly onto the computer or let liquid run into any part of it Never use harsh or caustic chemical products to clean the computer Moving the computer While the computer is designed for flexible day to day usage you should exercise a few simple precautions when moving it in order to help ensure trouble free operation m Make sure all disk disc activity has ended before moving the computer E Turn off shut down the computer H Disconnect the AC adaptor and all peripherals before moving the computer The Keyboard dock can be moved when connected H Close the display panel not applicable in tablet mode Do not pick up the computer by its display panel m Before carrying your computer shut it down
31. may occur in the following areas User s Manual 6 4 E Power m USB device E Keyboard m Sound system H Internal display panel E External monitor E Solid State Drive E Wireless LAN m Memory Media Card H Bluetooth E Pointing Device Power User s Manual When the computer is not plugged into an AC power outlet the battery pack is the primary power source However your computer also has a number of other power resources including an intelligent power supply and a Real Time Clock RTC battery all of which are interrelated with any one having the ability to produce apparent power problems Overheating power down If the processor s temperature reaches an unacceptably high level with either setting the computer will automatically shuts down to prevent any damage in this instance all unsaved data in memory will be lost Problem Procedure Computer shuts Leave the computer off until the it reaches room down automatically temperature If the computer has reached room temperature and it still does not start or if it starts but shuts down quickly contact TOSHIBA Support AC power If you have trouble turning on the computer with the AC adaptor connected you should check the status of the DC IN Battery indicator Please refer to the Monitoring of power condition section for further information Problem Procedure AC adaptor doesn t Check the connections to make sure that the power the computer power cord adaptor is firmly conn
32. monitor Then it will be displayed with suitable size with correct aspect ratio HDMI port HDMI High Definition Multimedia Interface port digitally transfers both video and audio data without reducing the quality HDMI compatible external display devices including televisions can be connected via the HDMI port To connect an HDMI compatible display device follow the steps as detailed below As the port operation of all HDMI display devices have not been confirmed some HDMI display devices may not function properly To connect a device to the HDMI port you must purchase an HDMI cable 1 Plug one end of the HDMI cable into the HDMI port of your HDMI display device 2 Plug the other end of the HDMI cable into the HDMI port on your computer or on the keyboard dock 4 27 User s Manual Figure 4 21 Connecting the HDMI port on the computer 1 HDMI micro port 2 HDMI cable Type D connector Figure 4 22 Connecting the HDMI port on the keyboard dock 1 HDMI port 2 HDMI cable Type A connector Please do not plug unplug an HDMI display device under the following conditions m The system is starting up E The system is shutting down When you connect a television or external monitor to the HDMI port the display output device is set to HDMI When you unplug the HDMI cable and re plug it please wait at least 5 seconds before you re plug the HDMI cable again When you change the display output device the
33. mouse pointer to the upper or lower right corner of your screen you will find a list of charms Search Share Start Devices and Settings Search This Charm allows you to search for most anything you need to locate on your computer It can help you find apps documents photos and your favorite music Share This Charm allows you to share music and photos with your favorite social Web sites Start This Charm allows you to view all of the available apps downloaded to your system Devices This Charm allows you to manage your hardware devices Settings This Charm allows you to manage your system settings Tiles Tiles can be accessed and launched from the Start screen Typical Start screen tiles are the Desktop tile and Mail tile as well as tiles representing all other applications downloaded to your system Windows Store Although many applications will be pre installed or built in to your computer you will also have the ability to download many other applications at the click of your mouse In the Windows Store you can search for and browse thousands of apps all grouped into easy to find categories Turning off the power The power can be turned off in one of the following modes either Shut Down Mode Sleep Mode or Hibernation Mode Shut Down Mode A When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system s main screen the next time it is turned on
34. normal keyboard overlay on 4 14 temporarily using overlay overlay off 4 14 turning on the overlays 4 13 Index 1 User s Manual LAN cable types 4 21 connecting 4 21 Media care Card care 4 24 Memory card care 4 24 Memory installing 4 19 removing 4 20 memory media card inserting 4 24 removing 4 25 Memory media slot 4 22 Moving the computer 1 15 MultiMediaCard removing 4 25 Password power on 5 5 Starting the computer by password 5 8 Supervisor 5 8 user 5 7 Pointing Device AccuPoint 3 8 4 5 AccuPoint control buttons 4 5 Touch Pad 3 8 Power conditions 3 14 Hibernation Mode 2 12 panel on off 5 5 Shut Down mode 2 10 Sleep Mode 2 10 turning off 2 10 turning on 2 7 Problems AC power 6 5 Analyzing the problem 6 2 Battery 6 6 Dual Pointing device 6 8 External monitor 6 11 Hardware and system checklist 6 4 HDD 6 7 6 8 Internal display panel 6 7 Keyboard 6 6 Memory Media Card 6 8 Overheating power down 6 5 Power 6 5 Real Time Clock 6 6 Sound system 6 11 TOSHIBA support 6 13 Touch Pad 6 9 USB device 6 10 USB mouse 6 10 Recovery hard disk drive 5 16 Recovery Media 5 15 5 16 Restarting the computer 2 10 SD SDHC SDXC Card formatting 4 23 Index 2 note 4 23 Sleep Mode setting 2 10 System automatic 5 5 Sound system problems 6 11 TOSHIBA Desktop Assist 5 1 TOSHIBA Display Utility 5 2 USB device problems 6 10 Video mode 4 33 Video RAM 3 12 W Web Camera 3 3
35. not respond to the keyboard commands If an error occurs and the computer does not respond to your keyboard commands follow the steps below Press the power button and hold it down for five seconds Once the computer has turned itself off wait between ten and fifteen seconds before turning the power on again by pressing the power button Your program stops responding If you are working with a program that suddenly freezes all operations chances are the program has stopped responding You can exit the failed program without shutting down the operating system or closing other programs To close a program that has stopped responding 1 Press CTRL ALT and DEL simultaneously once then click Task Manager The Windows Task Manager window appears 2 Select the program you want to close then click End Task Closing the failed program should allow you to continue working If it does not continue with the next step 3 Close the remaining programs one by one by selecting the program name then End Task Closing all programs should allow you to continue working If it does not power off your computer and then restart it The computer will not start Make sure you attached the AC adaptor and power cord cable properly If you are using the AC adaptor check that the wall outlet is working by plugging in another device such as a lamp Verify that the computer is on by looking at the Power indicator If the indicator is glowing t
36. of the side buttons away from infants and small children to prevent the accidental ingestion by them Do not use a ball point pen instead of the pen included with the product The pen tip of the Reserve Pen cannot be replaced if it is worn You can purchase a new one from a TOSHIBA authorized dealer You can change the pen settings in Pen and Touch To access it click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Pen and Touch Please wipe the touch screen with the provided cloth before you use the stylus pen Please clean the fingerprints or smudges with the provided cloth if the sensitivity to pen writing decreases Do not use a protecting sheet for the touch screen as it may impact the pen writing optimized for the touch screen E tis recommended that you keep another pen set as a spare You can buy replacement pen sets from your TOSHIBA authorized dealer amp TOSHIBA is not liable for any problems arising on the products due to the use of the pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users Removing the Reserve Pen To remove the Reserve Pen slowly pull the Reserve Pen to remove it from the Reserve Pen slot Figure 4 9 Removing the Reserve Pen ae 1 Reserve Pen slot 2 Reserve Pen Inserting the Reserve Pen To insert the Reserve Pen slowly push the Reserve Pen into the Reserve Pen slot until it
37. on the right side of the computer The USB 3 0 port is compliant with USB 3 0 standard and backward compatible with USB 2 0 devices Homi SDP oce DC IN 19V User s Manual Please note that it is not possible to confirm the operation of all functions of all USB devices that are available In view of this it may be noted that some functions associated with a specific device might not operate properly USB 3 0 port s may work as USB 2 0 port s when operating in USB Legacy Emulation mode Keep foreign metal objects such as screws staples and paper clips out of the USB port Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury HDMI micro port HDMI micro port can connect to HDMI cable with Type D connector An HDMI cable sends video and audio signals In addition to this it can send and receive control signals Please refer to the HDMI port section for details Memory media slot This slot lets you insert an SD SDHC SDXC memory card minisD microSD Card and MultiMediaCard Refer to the Memory media section for more information Keep foreign metal objects such as screws staples and paper clips out of the Memory media slot Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury SIM Card slot This slot lets you insert a SIM card which enables a high speed access to th
38. one of the supported application windows Enlarges the icon size on the desktop or the font sizes within one of the supported application windows Key Combination Function FN 3 Decreases the computer s volume FN 4 Increases the computer s volume FN Space Changes the display resolution FN ge Turns the keyboard backlight on or off Some functions will show the toast notification at the edges of the screen Those toast notifications are disabled at factory default You can enable them in the TOSHIBA Function Key application To access it click Desktop gt Desktop Assist gt Tools amp Utilities gt Function Key Windows special keys The keyboard provides two keys that have special functions in Windows the Windows Start Button key activates the Start screen while the application key has the same function as the secondary right mouse button This key activates the Windows Start screen This key has the same function as the secondary right mouse button Keypad overlay User s Manual The keyboard dock may not have a separate numeric keypad but includes a numeric keypad overlay which functions like one this is located in the center of the keyboard with the relevant keys having grey letters at their front edge The overlay provides the same functions as the numeric keypad on a standard 104 105 key enhanced keyboard Turning on the overlays The numeric keypad overlay can be used fo
39. this instance you should leave the AC adaptor connected for a few minutes and the battery should begin charging The Battery indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions E The battery has not been used for a long time m The battery has completely discharged and been left in the computer for a long time In such cases you should follow the steps as detailed below 1 Fully discharge the battery by leaving it in the computer with the power on until the system automatically turns itself off 2 Connect the AC adaptor to the DC IN 19V jack of the computer and to a wall outlet that is supplying power 3 Charge the battery until the Battery indicator glows white Repeat these steps two or three times until the battery recovers normal capacity Monitoring battery capacity Remaining battery power can be monitored using the following methods m Clicking the battery icon on the Taskbar H Via the Battery Status in the Windows Mobility Center window E You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time This is because the computer needs this time to check the battery s remaining capacity and then calculate the remaining operating time based on this together with the current power consumption E Please be aware that the actual remaining operating time may differ Slightly from the calculat
40. using Bluetooth Version 1 0B specifications The wireless devices have not completed verification of connection and operation with all devices which are using the Wireless LAN or Bluetooth radio technology Bluetooth and Wireless LAN devices operate within the same radio frequency range and may interfere with one another If you use Bluetooth and Wireless LAN devices simultaneously you may occasionally experience a less than optimal network performance or even lose your network connection If you should experience any such problem immediately turn off either one of your Bluetooth or Wireless LAN Please visit http Avww pc support global toshiba com if you have any questions about using Wireless LAN or Bluetooth Card from TOSHIBA In Europe visit http Awww toshiba europe com computers tnt bluetooth htm Wireless Devices and your health Wireless products like other radio devices emit radio frequency electromagnetic energy The level of energy emitted by Wireless products however is far much less than the electromagnetic energy emitted by wireless devices like for example mobile phones Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations TOSHIBA believes Wireless products is safe for use by consumers These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who contin
41. AC adaptor is connected and the battery is charging White Indicates the AC adaptor is connected and the battery is fully charged No light Under any other conditions the indicator does not light X i If the battery pack becomes too hot while it is being charged the charge J will stop and the Battery indicator will go out When the battery pack s temperature falls to a normal range charging will resume this process will occur regardless of whether the computer s power is on or off Power indicator Check the Power indicator to determine the power status of the computer the following indicator conditions should be noted White Indicates power is being supplied either from the AC adaptor or battery to the computer and the computer is turned on User s Manual 3 15 User s Manual Flashing white No light Indicates that the computer is in Sleep Mode and that there is sufficient power available AC adaptor or battery to maintain this condition Under any other conditions the indicator does not light Chapter 4 Operating Basics This chapter describes the basic operations of your computer highlights the precautions that should be taken when using it Operating in Tablet Mode When operating the computer in tablet mode follow the instructions below Figure 4 1 Operating the computer E Hold the computer firmly on your forearm Do not block the vent E Remove the AC adaptor from the computer when using it
42. Clock Sony philips Digital Interface Format User s Manual SD SDHC SDRAM SSD TFT URL USB UXGA VGA WAN WSXGA WSXGA WUXGA WXGA WXGA www XGA Secure Digital Secure Digital High Capacity Synchronous Dynamic Random Access Memory Solid State Drive Thin film Transistor Uniform Resource Locator Universal Serial Bus Ultra Extended Graphics Array Video Graphics Array Wide Area Network Wide Super Extended Graphics Array Wide Super Extended Graphics Array Plus Wide Ultra Extended Graphics Array Wide Extended Graphics Array Wide Extended Graphics Array Plus World Wide Web Extended Graphics Array Index User s Manual AC adaptor additional 4 30 connecting 2 5 DC IN 19V jack 3 5 3 9 ASCII characters 4 14 Battery extending life 4 18 monitoring capacity 4 17 real time clock 3 12 4 15 save mode 5 5 types 4 15 Battery indicator Bluetooth 7 6 Cleaning the computer 1 14 Cooling vents 3 6 3 11 DC IN indicator 3 4 Display automatic power off 5 4 screen 3 3 Display controller 3 12 Documentation list 2 1 Dual Pointing Device Touch Pad 6 9 Equipment checklist 2 1 External monitor problems 6 12 Hard disk drive automatic power off 5 5 HDMI out port 3 5 3 9 HW Setup accessing window Keyboard function keys 4 12 Function keys F1 F12 4 12 problems 6 6 Windows special keys 4 13 Keypad overlay Arrow mode 4 13 Numeric mode 4 14 temporarily using
43. DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE This product includes cryptographic software written by Eric Young eay cryptsoft com This product includes software written by Tim Hudson tjh cryptsoft com Original SSLeay License User s Manual Copyright C 1995 1998 Eric Young eay cryptsoft com All rights reserved This package is an SSL implementation written by Eric Young eay cryptsoft com The implementation was written so as to conform with Netscapes SSL This library is free for commercial and non commercial use as long as the following conditions are aheared to The following conditions apply to all code found in this distribution be it the RC4 RSA Ihash DES etc code not just the SSL code The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson tjh cryptsoft com Copyright remains Eric Young s and as such any Copyright notices in the code are not to be removed If this package is used in a product Eric Young should be given attribution as the author of the parts of the library used This can be in the
44. Disc rewritable CMOS Complementary Metal oxide Semiconductor CPU Central Processing Unit DC Direct Current DDR Double Data Rate DIMM Dual Inline Memory Module DVD Digital Versatile Disc DVD R Digital Versatile Disc recordable DVD RAM Digital Versatile Disc random Access Memory 7 15 User s Manual DVD R DL DVD ROM DVD RW DVD R DL FAT FCC GB GBps HDD HDMI HDMI CEC HTML IEEE 1 0 IRQ ISP KB LAN LCD LED MB MBps MMC OCR PC PCI PCMCIA RAM RGB RFI ROM RTC S P DIF Digital Versatile Disc Recordable Dual Layer Digital Versatile Disc read Only Memory Digital Versatile Disc rewritable Digital Versatile Disc Recordable Double Layer File Allocation Table Federal Communications Commission gigabyte gigabytes per second Hard Disk Drive High definition Multimedia Interface High definition Multimedia Interface Consumer Electronics Control Hypertext Markup Language Institute of Electrical and Electronics Engineers Input Output interrupt request Internet Service Provider kilobyte Local Area Network Liquid Crystal Display Light Emitting Diode megabyte megabytes per second Multi Media Card Optical Character Recognition Reader Personal Computer Peripheral Component Interconnect Personal Computer Memory Card International Association Random Access Memory Red Green and Blue Radio Frequency Interference Read Only Memory Real Time
45. For example if a mouse or USB keyboard is connected to a USB port clicking the mouse button or pressing the keyboard will wakeup the computer Heat dispersal 1 To protect against overheating the processor is equipped with an internal temperature sensor which activates a cooling fan or lowers the processing speed if the computer s internal temperature rises to a certain level You are able to select whether to control this temperature by either turning on the fan first then if necessary lowering the processor speed or by lowering the processor speed first then if necessary turning on the fan Both of these functions are controlled through the Power Options When the processor s temperature falls within normal range the fan and the processor operation will return to its standard speed If the processor s temperature reaches an unacceptably high level with either setting the computer automatically shuts down to prevent any damage In this instance all unsaved data in memory will be lost TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security User and Supervisor User s Manual 5 6 i Passwords set by the TOSHIBA Password Utility function are different from the Windows password User Password T User s Manual To start the utility click the following items Desktop gt Desktop Assist gt Tools amp Utilities gt Password Utility gt User Password User authenti
46. OR CONSEQUENTIAL DAMAGES INCLUDING BUT NOT LIMITED TO PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES LOSS OF USE DATA OR PROFITS OR BUSINESS INTERRUPTION HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY WHETHER IN CONTRACT STRICT LIABILITY OR TORT INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE The licence and distribution terms for any publically available version or derivative of this code cannot be changed i e this code cannot simply be copied and put under another distribution licence including the GNU Public Licence FreeType License Issues User s Manual The FreeType Project LICENSE 2006 Jan 27 Copyright 1996 2002 2006 by David Turner Robert Wilhelm and Werner Lemberg Introduction The FreeType Project is distributed in several archive packages some of them may contain in addition to the FreeType font engine various tools and contributions which rely on or relate to the FreeType Project This license applies to all files found in such packages and which do not fall under their own explicit license The license affects thus the FreeType font engine the test programs documentation and makefiles at the very least This license was inspired by the BSD Artistic and IJG Independent JPEG Group licenses which all encourage inclusion and use of free software in commercial and freeware products alike As a consequ
47. Support If you require any additional help using your computer or if you are having problems operating the computer you may need to contact TOSHIBA for additional technical assistance Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first Before contacting TOSHIBA try the following H Review troubleshooting sections in the documentation supplied with your software and or peripheral devices H fa problem occurs when you are running software applications consult the software documentation for troubleshooting suggestions and consider calling the software company s technical support department for assistance H Consult the reseller or dealer from where you purchased your computer and or software they are your best resource for current information and support TOSHIBA technical support If you are still unable to solve the problem and suspect that it is hardware related visit TOSHIBA technical support website http www toshiba europe com or http www toshiba co jp worldwide User s Manual Chapter 7 Appendix Specifications This section summarizes the computer s technical specifications Physical Dimensions Physical Dimensions shown below do not include parts that extend beyond the main body The physical dimensions may vary depending on the model you purchased Size 299 w x 189 d x 12 4
48. TOSHIBA Leading Innovation gt gt gt User s Manual PORTEGE Z10t A WT310 Table of Contents Chapter 1 Chapter 2 Chapter 3 Chapter 4 User s Manual TOSHIBA Legal Regulatory and Safety Copyright Disclaimer and Trademarks 2 ccesseeeeeeeeeeeeeeeeeeeees 1 1 Regulatory Information 2 eccceeeeseeeeeeeeeeeeeeeeeeeeseeeeeeeeeeeeneeeeeeeeaes 1 2 Video Standard Notice eecccsseceeeenc eee eesseneeeseeeeseeeseesoneesseenensseeees 1 7 OpenSSL Toolkit License Issues 21 ceeceeeeeeeeeeeeeeeeeeeeeeeneeeeeeeeee 1 7 FreeType License ISSUES ccceeeeeeeeeeeeeseeeeeeeeesesenaeeeeeeseeeseeeeeees 1 10 Disposing of the computer and the computer s batteries 1 13 General Precautions ccccessneseeeeenseneeeeeeeseeeeeesnseeeeseseeeeeeeeeenneneeenss 1 13 Safety ICONS oiciscsccccsecceeessceseseecvaaeeacecceedvesuewecteduetiae ci vdneeedsay dadenedeuduaneress 1 16 Getting Started Equipment hecklist lis se ioc os pecs satcs ck siete ce cctae dace hece sagt ep aidaa cuties 2 1 Dual Operating mode ics cicic ccececcnsscanencaneseestecscuancncencensusnencnssensececnsseuanes 2 1 CONVENTIONS isossa eedan iaaa aaa a aana a ndai aaae a 2 2 Using your computer for the first time 2 cse sececeeeeeeeeeeeeeeeeees 2 3 Tuming off the Power 32 c02 cei0ceer cette eee te ea eiadad teeta 2 10 The Grand Tour The COMPU has cay sce eee ae aea aanas daa ada eta Naa
49. aARWN gt Wireless display User s Manual Some models support Intel Wireless Display Intel WiDi a wireless technology which utilizes Wi Fi to allow the computer to be wirelessly connected to external displays including TVs as extended screens With Intel WiDi documents streamed local media contents or other online contents can be shared wirelessly with others To use Intel WiDi either one of the following devices is required A compatible external display with built in support for Intel WiDi E An external display with HDMI port and a digital adaptor featuring Intel WiDi The adaptor is a device that connects to the external display via HDMI port and can receive Wi Fi signals from your computer 4 29 Type Intel WiDi from the Start screen and click Intel R WiDi Intel WiDi application will launch and you are ready to start the connection To learn more details on how to complete the connection please refer to the application help 7 Some copy protected media contents may not play on the external displays J via Intel WiDi Changing the display settings After one or more external displays are connected the operating system can automatically detect identify and setup the display settings You can also manually manage how the external displays will work and change the display settings by pressing P while holding down the Windows key If you disconnect the external display before you turn the computer s power of
50. adecees 7 15 Index Chapter 1 TOSHIBA Legal Regulatory and Safety This chapter states the Legal regulatory and safety information applicable to TOSHIBA computers Copyright Disclaimer and Trademarks Copyright 2013 by TOSHIBA Corporation All rights reserved Under the copyright laws this manual cannot be reproduced in any form without the prior written permission of TOSHIBA No patent liability is assumed with respect to the use of the information contained herein First edition February 2013 Copyright authority for music movies computer programs databases and other intellectual property covered by copyright laws belongs to the author or to the copyright owner Copyrighted material can be reproduced only for personal use or use within the home Any other use beyond that stipulated above including conversion to digital format alteration transfer of copied material and distribution on a network without the permission of the copyright owner is a violation of copyright or author s rights and is subject to civil damages or criminal action Please comply with copyright laws in making any reproduction from this manual Disclaimer This manual has been validated and reviewed for accuracy The instructions and descriptions it contains are accurate for your computer at the time of this manual s production However succeeding computers and manuals are subject to change without notice TOSHIBA assumes no liability for damages
51. age media Failure to do so may result in the loss of data Connecting TOSHIBA Keyboard Dock TOSHIBA Keyboard Dock provided with some models can turn your computer into a laptop for extensibility including a physical keyboard and more ports To use the computer in laptop mode you need to connect TOSHIBA Keyboard Dock to the computer by following the steps below 1 Hold the computer with two hands on both the left and right sides 2 Align the docking interface located on the computer with the docking connector on the keyboard dock User s Manual 2 3 3 Press down the computer until it clicks into place The docking connector on the keyboard dock engages the docking interface on the computer Figure 2 1 Connecting the keyboard dock o m Please close the display screen when you move or are carrying the T computer E Do not lift the computer by the palm rest on the keyboard dock Fail to follow this instruction may cause damage to the computer or result in minor injury Do not press or push with excess force on the display screen Donot lift the computer by the display screen m Do not close the computer with pens or any other objects left in between the computer and the keyboard dock m Please be careful not to hurt your fingers when you are docking the computer to the keyboard dock m Never remove the computer without unlocking by the release latch otherwise it may cause damage to the computer m Never tur
52. akers or headphones move the Speakers slider m To adjust the volume level of an application that you are using move the slider for the corresponding application Microphone Level Follow the steps below to change the microphone recording level 1 Right click on the speaker icon on the Taskbar and select Recording devices from the sub menu 2 Select Microphone and click Properties 3 On the Levels tab move the Microphone slider to increase or decrease the microphone volume level If you feel the microphone volume level is inadequate move the Microphone Boost slider to a higher level Audio Enhancements In order to apply the sound effects for your current speaker follow the steps below 1 Click Desktop and right click on the Speakers icon on the Taskbar and then select Playback devices from the sub menu 2 Select Speakers and click Properties 3 On the Enhancements tab select the sound effects you would like and click Apply Realtek HD Audio Manager User s Manual You can confirm and change the audio configuration using the Realtek HD Audio Manager To launch the Realtek HD Audio Manager H Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Realtek HD Audio Manager When you first launch the Realtek HD Audio Manager you will see two device tabs Speakers is the default output device Microphone is the default input device To change the default device click the Set Defaul
53. ames and service names in this manual may be trademarks or registered trademarks of their respective companies Regulatory Information i FCC User s Manual The regulatory information herein may vary Pease check the ID information on the back of the device for specific information applicable to the model you purchased information FCC notice Declaration of Conformity Information This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna m sIncrease the separation between the equipment and receiver i E Connect the equipment into an outlet on a circuit different from that to which the receiver is connected m Consult the dealer or an experienced radio TV technician
54. and Advanced Usage Utilities and Applications c ccceeceeceee cece seen ee eeeeeeeeeeeeeeeeeeeeeeeeeeeaes 5 1 Special features ccc ccssice cpcssseeseeteceeandedecavcansecs cepesscanceeetevaancnceceveancaneaenees 5 4 TOSHIBA Password Utility 0 00 0 cccccssseeeesseeeeseeeesseeeeeseensneeeenenseeeenes 5 6 TOSHIBA System SettingS cceecessseeeeeseeeeeeeeeeseeeeesseeeeneseenenssneeenes 5 9 TOSHIBA Media Player by sMedio TrueLink ccssessseeeseeens 5 10 TOSHIBA PC Health Monitor c ccscceceseeeeseeeeeeeeseneeseeeeeeenseneeeeeeeeees 5 11 TOSHIBA Setup Utility isca ccc ccscestescnctesectcadetccssaccetecnexscesnneesenesesnncecies 5 12 System Recovery ou cceccecsseeeeceseeeeseeeeeeseeeeeneeeseseeeeseseeeesaseeseeeseeennsoneeees 5 13 Troubleshooting Problem solving process ce ccceceeeeseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeenees 6 1 Hardware and system checklist c cccesesesseeeeeseeeeeeeeseeseeeeeseeeneseeens 6 4 TOSHIBA support 0 0 ceeeceeseeeeee seen eeeeeeesneeeeeesseneeeseeesueneeesnseneesneeneesseaees 6 13 Appendix Specifications sermi asi nadadaan ai daea daraa iiiar 7 1 AC Power Cord and Connectors ccccecesseeeceeeeeeeeseeeeseeeeeneeeeeeeeees 7 2 Information for Wireless Devices cceseseseeeeeeeeeeeeeeeeeeneseeeeneeneneneees 7 3 Legal FOOtm Otte ssania sake cea cance dteeseatencceesscbenecedeeebectenieess 7 13 GI OSS a E ausesceaddbenwce cdvdeented ceccuneae
55. and more advanced touch screen gestures to interact with Windows 8 please refer to Help and Support E Do not press or push with excess force on the touch screen H Do not apply excess force when cleaning the touch screen m Never touch the screen with a sharp object such as a ball point pen which may scratch or damage the surface E Do not use a protecting sheet for the touch screen as it may decrease its sensitivity to gestures The Touch Pad located on the TOSHIBA Keyboard Dock may support the following gestures Tap Two Finger Tap Pinch or stretch Tap once on the touch pad to active an item such as an app Tap once on the touch pad with two fingers together to display a menu or other function depending on the software you are using Similar to right click Place two or more fingers down on the touchpad and move them toward each other pinch or away from each other stretch This will show different levels of information or visually zooms in or out t Two Finger Scroll Place two fingers down and slide them vertically or horizontally from anywhere on the touch pad This allows you to operate the scroll bars of a window lt Swipe Quickly move your finger in from the edge of the touch pad without pausing when you first touch it Swipe from the left edge shows your recently opened apps Swipe from the right edge opens or closes the charms Search Share Start Devices Settings Swipe from th
56. ation regarding Graphics Processing Unit GPU please refer to the Legal Footnotes section User s Manual 3 12 Intel Display Power Saving Technology Intel GPU includes the Display Power Saving Technology feature that can save the computer s power consumption by optimizing picture contrast on the internal LCD This feature can be used if the computer is HM running under battery mode H using the internal LCD display only The Display Power Saving Technology feature is enabled at factory default If you want to disable this feature you can disable it The Display Power Saving Technology feature can be disabled in the Intel Graphics and Media Control Panel You can access this control panel in the following way H Right click on the desktop and click Graphics Properties In this control panel 1 Click Power 2 Select On battery from the drop down menu in Power Source 3 Clear the Display Power Saving Technology check box 4 Click OK If you want to enable this feature under the conditions mentioned above select the Display Power Saving Technology check box Intel Rapid Start Technology User s Manual Your computer supports Intel Rapid Start Technology which enables the computer to change to Hibernation Mode from Sleep Mode after a specified period of time With the Intel Rapid Start Technology the Windows can rapidly resume from Hibernation Mode and battery life will be longer than when in Sleep Mode
57. board 12 Eject button Product appearance depends on the model you purchased Figure 3 3 Back view of the keyboard dock 13 DC IN 19V jack 15 HDMI port 14 LAN jack 16 External RGB monitor port Product appearance depends on the model you purchased User s Manual a7 A User s Manual Figure 3 4 Left view of the keyboard dock 17 Universal Serial Bus USB 2 0 port Product appearance depends on the model you purchased Touch Pad Touch Pad ON OFF indicator TOSHIBA eco indicator Touch Pad control buttons Keyboard AccuPoint Computer holder Hooks The Touch Pad located in the palm rest is used to control the movement of the on screen pointer To use the Touch Pad simply touch and move your fingertip across it in the direction you want the on screen pointer to go Double tap this indicator to enable disable the Touch Pad Double tap to enable disable TOSHIBA eco Utility The two buttons above the Touch Pad are used like the buttons on a standard mouse press the left button to select a menu item or to manipulate text or graphics designated by the pointer and press the right button to display a menu or other function depending on the software you are using Keyboard contains character keys control keys function keys and special Windows keys providing all the functionality of a full size keyboard Refer to the The Keyboard section for details A pointer control device located in t
58. cal networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight 2 Permitted to use for public wireless access local networks on board aircraft during a flight at the altitude not less than 3000m To remain in conformance with European spectrum usage laws for Wireless LAN operation the above 2 4GHz and 5GHz channel limitations apply for outdoor usage The user should use the wireless LAN utility to User s Manual User s Manual check the current channel of operation If operation is occurring outside of the allowable frequencies for outdoor use as listed above the user must contact the applicable national spectrum regulator to request a license for outdoor operation Canada Industry Canada IC This device complies with RSS 210 of the Industry Canada Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Ce dispositif est conforme a la norme CNR 210 d Industrie Canada applicable aux appareils radio exempts de licence Son fonctionnement est sujet aux deux conditions suivantes 1 le dispositif ne doit pas produire de brouillage pr judiciable et 2 ce dispositif doit accepter tout brouillage regu y compris un brouillage susceptible de provoquer un fonctionnement ind sirable The term IC
59. cation may be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords etc Set button Click this button to register a password After a password is set you will be prompted to enter it when you start the computer After you set the password a dialog box will be displayed asking whether you want to save it to other media If you forget the password you can open the password file on another computer Be sure to keep the media in a safe place When entering the character string to register the password enter from the keyboard character by character and do not enter as ASCII code or copy and paste the character string In addition ensure that the registered password is correct by outputting the character string to the password file When entering a password do not enter any characters for example or produced by pressing the SHIFT or ALT keys Delete button Click this button to delete a registered password Before you can delete a password you must first enter the current password correctly Change button Click this button to change a registered password Before you can change a password you must first enter the current password correctly Owner String text box You can use this box to associate text with the password After you enter text click Apply or OK When the computer is started this text will be displayed together with the prompt asking you to enter a pas
60. cator will flash amber to indicate that only a few minutes of battery power remain If you continue to use the computer while the Battery indicator flashes the computer will enable Hibernation Mode so that you do not lose any data and automatically turn itself off You must recharge a battery pack when it becomes discharged Procedures To recharge a battery pack connect the AC adaptor to the DC IN 19V jack and plug the other end into a working outlet the Battery indicator will glow amber while the battery is being charged Charging Time The following table shows the approximate time required to fully charge a discharged battery in tablet mode Battery type Power off Power on Battery pack about 3 hours about 3 5 8 5 hours RTC battery Doesn t charge about 12 hours Please be aware that the charging time when the computer is on is affected by ambient temperature the temperature of the computer and how you are using the computer if you make heavy use of external devices for example the battery might scarcely charge at all during operation Battery charging notice The battery may not begin charging immediately under the following conditions m The battery is extremely hot or cold if the battery is extremely hot it might not charge at all To ensure the battery charges to its full capacity you should charge it at room temperature of between 5 C to 35 C 41 F to 95 F m The battery is nearly completely discharged In
61. ct is copyrighted material only this license or another one contracted with the authors grants you the right to use distribute and modify it Therefore by using distributing or modifying the FreeType Project you indicate that you understand and accept all the terms of this license 4 Contacts There are two mailing lists related to FreeType E freetype nongnu org Discusses general use and applications of FreeType as well as future and wanted additions to the library and distribution If you are looking for support start in this list if you haven t found anything to help you in the documentation E freetype devel nongnu org Discusses bugs as well as engine internals design issues specific licenses porting etc Our home page can be found at http www freetype org Disposing of the computer and the computer s batteries Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the batteries General Precautions TOSHIBA computers are designed to optimize safety minimize strain and withstand the rigors of portability However certain precautions should be observed to further reduce the risk of personal injury or damage to the computer Be certain to read the general precautions below and to note the cautions included in the text of the manual Provide adequate ventilation Always make sure your computer and AC adaptor have adequate ventilation and are protected fro
62. d then select HDD Recovery 3 Select Troubleshoot 4 Select Reset your PC 5 Follow the on screen instructions to finish the recovery You can also perform the restoration through PC settings in the operating system 1 Click the Settings charm and click Change PC settings 2 Click General under PC settings 3 Scroll down to Remove everything and reinstall Windows and click Get started 4 Follow the on screen instructions to finish the recovery Ordering Recovery Discs from TOSHIBA You can order Product Recovery discs for your notebook from the TOSHIBA Europe Backup Media Online Shop User s Manual 5 16 T User s Manual Please note that this service is not free of charge 1 2 Visit https backupmedia toshiba eu on the Internet Follow the on screen instructions You will receive your Recovery Discs within two weeks after placing your order Chapter 6 Troubleshooting TOSHIBA have designed this computer for durability however should problems occur you are able to use the procedures detailed in this chapter to help determine the cause All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place Problem solving process Resolving problems will be much easier if you observe the following guidelines H Stop immediately when you recognize a problem exists as taking further action may result in data loss or damage or
63. dical device when using any wireless functionality E Always turn off wireless functionality if the computer is near automatic control equipment or appliances such as automatic doors or fire detectors Radio waves can cause malfunction of such equipment possibly resulting in serious injury m t may not be possible to make a network connection to a specified network name using the ad hoc network function If this occurs the new network will have to be configured for all computers connected to the same network in order to re enable network connections Please be sure to use new network name Security TOSHIBA strongly recommend that you enable encryption functionality otherwise your computer will be open to illegal access by an outsider using a wireless connection If this occurs the outsider may illegally access your system eavesdrop or cause the loss or destruction of stored data H TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof Card Specifications Form Factor PCI Express Mini Card Compatibility E IEEE 802 11 Standard for Wireless LANs Network Operating m Microsoft Windows Networking System Media Access mH CSMA CA Collision Avoidance with Protocol Acknowledgment ACK Radio Characteristics Radio Characteristics of Wireless LAN module may vary according to H Country region where the product was purchased E Type of product W
64. disconnect the AC adaptor and allow it to cool down a failure to follow this instruction may result in minor heat injury Be careful not to subject the computer to impact or shock a failure to follow this instruction could result in damage to computer computer failure or loss of data Never transport your computer with any cards installed this may cause damage to either the computer and or the card resulting in computer failure H Always use a suitable carry case when transporting the computer m When carrying your computer be sure to hold it securely so that it does not fall or hit anything Do not carry your computer by holding any of its protruding elements Mobile phones Please be aware that the use of mobile phones can interfere with the audio system The operation of the computer will not be impaired in any way but it is recommended that a minimum distance of 30cm is maintained between the computer and a mobile phone that is in use Instruction Manual for Safety and Comfort All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort Be sure to read it before using the computer User s Manual 1 15 Safety Icons User s Manual Safety icons are used in this manual to bring important information to your attention Each type of message is identified as shown below Indicates a potentially hazardous situation which could result in
65. e Internet corporate Intranet and your email while you are away from office DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase using the wrong AC adaptor can cause damage to the computer Docking interface This interface enables the connection of the keyboard dock and the optional cradle described in Optional TOSHIBA Accessories section Hook holes Designed for engaging the hooks on the keyboard dock and ensuring a firm connection qT User s Manual Stereo speakers The speakers emit sound generated by your software as well as audio alarms such as low battery condition generated by the system The stereo speakers will be disabled after your computer is connected to the optional cradle described in Optional TOSHIBA Accessories section and the audio output is routed through the 3 5mm audio out jack on the cradle To manually set the stereo speakers as the default playback device please follow the steps below 1 Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Sound 2 Inthe Playback tab select Speakers Realtek High Definition Audio and click Set Default button 3 Click OK Cooling vents Web Camera back The cooling vents help the processor to avoid overheating Your computer is also equip
66. e Start screen by clicking the Start charm You can also use the Windows logo key H on the keyboard dock or press the Windows button on the computer to go to the Start screen For detailed information please refer to the Windows Help and Support User s Manual 2 2 Using your computer for the first time f i Be sure to read the enclosed Instruction Manual for Safety and Comfort for J information on the safe and proper use of this computer It is intended to help you be more comfortable and productive while using a notebook computer By following the recommendations in it you may reduce your chance of developing a painful or disabling injury to your hand arms shoulders or neck This section provides basic information to start using your computer It covers the following topics Connecting TOSHIBA Keyboard Dock Connecting the AC adaptor Turning on the power Initial setup Getting to know the Start screen Use a virus check program and make sure it is updated regularly 3 1 Never format storage media without checking its content formatting destroys all stored data It is a good idea to periodically back up the internal Solid State Drive or other main storage device to external media General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss Before you install a device or application save any data in memory to the Solid State Drive or other stor
67. e method of calibrating this computer Figure 4 4 Calibrating digital compass 7 Using the Touch Screen You can use your finger to manipulate icons buttons menu items the onscreen keyboard and other items on the touch screen Tap Simply tap your finger once on the touch screen to active an item such as an app Q Press and hold Press your finger down and leave it there for a w few seconds This will show information to help you learn more about an item or will open a menu specific to what you are doing f Pinch or stretch Touch the screen or an item with two or more 4 fingers and then move the fingers toward each other pinch or away from each other stretch This will show different levels of information or visually zooms in or out your hand to rotate things in the direction you D Rotate Put two or more fingers on an item and then turn i turn your hand Only some items can be rotated User s Manual 4 3 Y Slide A Using the Touch Pad Q User s Manual Swipe Drag your finger on the touch screen to move through what s on the screen Quickly move your finger in from the edge of the screen without pausing when you first touch it Swipe from the left edge shows your recently opened apps and so on Swipe from the right edge opens or closes the Charms Search Share Start Devices Settings Swipe from the top edge opens or closes the app command bar For details
68. e they are correctly and firmly attached to the computer loose cables can cause signal errors Inspect all connecting cables for loose wires and all connectors for loose pins Check that your disc media is correctly loaded Always try to make detailed notes of your observations and keep them ina permanent error log this will help you to describe your problems to TOSHIBA Support In addition if a problem recurs the log you have made will help to identify the problem faster Analyzing the problem User s Manual Sometimes the computer will give you clues that can help you identify why it is malfunctioning In view of this you should keep the following questions in mind Which part of the computer is not operating properly keyboard Solid State Drive display panel Touch Pad Touch Pad control buttons as each device will produce different symptoms Check the options within the operating system to ensure that its configuration is set properly What appears on the display Does it display any messages or random characters Make a screenshot of the current display and if possible look up the messages in the documentation included with the computer software or operating system Check that all connecting cables are correctly and firmly attached as loose cables can cause erroneous or intermittent signals Do any indicators light if so which ones what color are they and do they stay on or blink Write down what you see Do you h
69. e top edge opens or closes the app command bar y Some of the touch pad operations described in this section are only supported in certain applications TOSHIBA Pointing Device AccuPoint To use the AccuPoint simply push it with your finger tip in the direction you want to move the on screen pointer The Touch Pad control buttons below the AccuPoint are used like the buttons on a standard mouse press the left button to select a menu item or to manipulate text or graphics designated by the pointer and press the right button to display a menu or other function depending on the software you are using Figure 4 5 AccuPoint 1 AccuPoint 3 Touch Pad left control button 2 Touch Pad right control button User s Manual 4 5 AccuPoint precautions Certain conditions can affect the on screen pointer when using AccuPoint For example the pointer may travel contrary to AccuPoint operation or an error message may appear if H You touch the AccuPoint during power up m You apply constant soft pressure during power up m There is a sudden temperature change E Strong stress is applied to the AccuPoint If an error message appears reboot the tablet If an error message does not appear wait a moment for the pointer to stop then continue operation Replacing the cap The AccuPoint cap is an expendable item that should be replaced after prolonged use 1 To remove the AccuPoint cap gently dig the cap out with finger
70. e up on Keyboard option is enabled within the TOSHIBA System Settings m Ifthe computer enters Sleep Mode while a network application is active the application might not be restored when the computer is next turned on and the system returns from Sleep Mode E Touse the Hybrid Sleep function configure it in the Power Options Benefits of Sleep Mode The Sleep Mode feature provides the following benefits H Restores the previous working environment more rapidly than does the Hibernation Mode feature m Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature E Allows the use of the panel power off feature Executing Sleep Mode You can enter Sleep Mode in one of three ways m Inthe Settings charm click Power and then select Sleep T Close the display panel Please note that this feature must be enabled within the Power Option m Press the power button Please note that this feature must be enabled within the Power Options When you turn the power back on you can continue where you left when you shut down the computer E When the computer is in Sleep Mode the Power indicator will blink white m f you are operating the computer on battery power you can lengthen the overall operating time by turning it off into Hibernation Mode Sleep Mode will consume more power while the computer is off Sleep Mode limitations Sle
71. e utilities described here can be accessed from Desktop gt Desktop J Assist The Desktop Assist icon is located in the taskbar of the Desktop Furthermore some utilities can also be launched from Start screen and desktop shortcut TOSHIBA Desktop TOSHIBA Desktop Assist is a graphical user Assist interface that provides access to specific tools and TOSHIBA utilities and applications that make the use and configuration of the computer easier To access this utility click Desktop gt Desktop Assist User s Manual 5 1 User s Manual TOSHIBA Display Utility TOSHIBA Password Utility TOSHIBA System Settings TOSHIBA Display Utility includes Desktop Text Size utility Split Screen utility and Other Settings Desktop Text Size allows you to make the text size bigger or smaller on the desktop according to your usage and favorite You can change the text size on the display and on the title bar of windows by changing the scaling of the text size When the scaling is smaller more information will appear on the display simultaneously but the text size becomes smaller When the scaling is larger less information will appear on the display simultaneously but the text size becomes larger You can install Split Screen utility by yourself Split Screen utility enables you to create multiple display zones on a screen and to fit the active windows to within those zones To access this utility click Desktop gt Desktop Assist
72. ear any beeps if so how many are they long or short and are they high pitched or low pitched In addition is the computer making any unusual noises Write down what you hear Record your observations so you can describe them in detail to TOSHIBA Support Software The problems may be caused by your software or disk If you cannot load a software package the media may be damaged or the program might be corrupted in these instances try loading another copy of the software if possible If an error message appears while you are using a software package you should refer to the documentation supplied with it as this will usually include a problem solving section or a summary of error messages Next you should check any error messages against the operating system documentation A Hardware If you cannot find a software problem you should then check the setup and configuration of your hardware First run through the items in the preliminary checklist as described previously then if you still cannot correct the problem try to identify the source the next section provides checklists for individual components and peripherals Before using a peripheral device or application software that is not an authorized TOSHIBA part or product make sure the device or software can be used with your computer Use of incompatible devices may cause injury or may damage your computer If something goes wrong User s Manual Your computer does
73. ect switch to the lock position if you do not want to record data m Memory cards have a limited lifespan so it is important to backup important data H Do not write to a card if the battery power is low Low power could affect writing accuracy m Do not remove a card while read write is in progress 2 For more details on using memory cards see manuals accompanying the T cards About the write protect The memory media cards have a function for protect E SD Card SD memory card SDHC memory card and SDXC memory card AN Set the write protect switch to the lock position if you do not want to record data Inserting a memory media The following instructions apply to all types of supported media devices To insert a memory media follow the steps as detailed below 1 Remove the dummy card y The dummy card shapes like an actual SD memory card and can keep dirt J and dust out of the memory media slot User s Manual 4 24 Figure 4 18 Removing the dummy card a 1 Memory media slot 2 Dummy card 2 Turn the memory media so that the contacts metal areas face up 3 Insert the memory media into the memory media slot on the side of the computer Figure 4 19 Inserting a memory media 1 Memory media slot 2 Memory media m Make sure the memory media is oriented properly before you insert it If you insert the media in wrong direction you may not be able to remove it E When inserting the memory media d
74. ected to the computer and a working power outlet Check the condition of the cord and terminals If the cord is frayed or damaged it should be replaced while if the terminals are soiled they should be cleaned with a clean cotton cloth If the AC adaptor still does not power the computer you should contact TOSHIBA Support Battery If you suspect a problem with the battery you should check the status of the Battery indicator Problem Battery doesn t power the computer Battery doesn t charge when the AC adaptor is attached Battery doesn t power the computer as long as expected Real Time Clock Problem The BIOS setting and system date time are lost Keyboard Procedure The battery may be discharged connect the AC adaptor to recharge the battery If the battery is completely discharged it will not begin charging immediately in these instances you should wait a few minutes before trying again If the battery still does not charge you should check that the power outlet the AC adaptor is connected to is supplying power this can be tested by plugging another appliance into it If you frequently recharge a partially charged battery the battery might not charge to its full potential in these instances you should fully discharge the battery and then attempt to charge it again Check the Power saver option under Select a power plan in the Power Options Procedure The charge in the Real Ti
75. ed time E With repeated discharges and recharges the battery s capacity will gradually decrease In view of this it will be noted that an often used older battery will not operate for as long as a new battery even when both are fully charged Maximizing battery operating time User s Manual A battery s usefulness depends on how long it can supply power on a single charge while how long the charge lasts in a battery depends on Processor speed Screen brightness System Sleep Mode System Hibernation Mode Display power off period Solid State Drive power off period How often and for how long you use the Solid State Drive and external disk drives for example optical disc How much charge the battery contained to begin with m How you use optional devices such as a USB device to which the battery supplies power m Whether you enable Sleep Mode which can conserve battery power if you are frequently turning the computer off and on m Where you store your programs and data Whether you close the display panel when you are not using the keyboard closing the display saves power m The environmental temperature operating time decreases at low temperatures H Whether you enable Sleep and Charge function Batteries exhausted time When you turn off the power of your computer with batteries fully charged the batteries will be exhausted within the following approximate period in tablet mode Battery type Sleep Mode
76. eing restored the next time a key is pressed This can be specified in the Power Options User s Manual SSD automatic power off 1 Intel AT System automatic Sleep Hibernation Mode 1 Power on password Intelligent power supply Battery save mode 1 Panel power on off Low battery automatic Hibernation Mode 1 This feature automatically cuts off power to the Solid State Drive when it is not accessed for a specified time with power being restored when the Solid State Drive is next accessed This can be specified in the Power Options Intel Anti Theft Technology Intel AT is an embeded hardware based security feature that can help secure sensitive data and protect your computer from theft When you enter the password for Intel AT please use the keyboard dock or the external USB keyboard you once used for registering the password When you are registering the password for Intel AT please use the keyboard dock or the external USB keyboard This feature automatically shuts down the system into either Sleep Mode or Hibernation Mode when there is no input or hardware access for a specified time This can be specified in the Power Options Two levels of password security supervisor and user are available to prevent unauthorized access to your computer A microprocessor in the computer s intelligent power supply detects the battery s charge automatically calculates the remaining battery capac
77. em configuration while the computer is turned off If the RTC battery becomes completely discharged the system will lose this information and the real time clock and calendar will stop working Your computer will automatically power off after 1 minute and the same message will appear again the next time when it is turned on You can change the Real Time Clock settings in the BIOS setup utility Please refer to TOSHIBA Setup Utility section for further information The RTC battery does not charge while the computer is turned off even if the AC adaptor is attached Care and use of the battery pack A User s Manual This section provides the important safety precautions in order to handle your battery pack properly Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions E The computer s RTC battery is a Ni MH battery and should be replaced only by your dealer or by a TOSHIBA service representative The battery can explode if not properly replaced used handled or disposed Dispose of the battery as required by local ordinances or regulations Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius Otherwise the electrolyte solution might leak battery pack performance might deteriorate and the battery life might be shortened Charging the batteries i User s Manual When the power in the battery pack becomes low the Battery indi
78. ence its main points are that E We don t promise that this software works However we will be interested in any kind of bug reports as is distribution m You can use this software for whatever you want in parts or full form without having to pay us royalty free usage m You may not pretend that you wrote this software If you use it or only parts of it in a program you must acknowledge somewhere in your documentation that you have used the FreeType code credits We specifically permit and encourage the inclusion of this software with or without modifications in commercial products We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project User s Manual Finally many people asked us for a preferred form for a credit disclaimer to use in compliance with this license We thus encourage you to use the following text Portions of this software are copyright C lt year gt The FreeType Project www freetype org All rights reserved Please replace lt year gt with the value from the FreeType version you actually use Legal Terms Throughout this license the terms package FreeType Project and FreeType archive refer to the set of files originally distributed by the authors David Turner Robert Wilhelm and Werner Lemberg as the FreeType Project be they named as alpha beta or final release You refers to the licensee o
79. ep Mode will not function under the following conditions Power is turned back on immediately after shutting down E Memory circuits are exposed to static electricity or electrical noise Hibernation Mode A User s Manual The Hibernation Mode feature saves the contents of memory to the Solid State Drive when the computer is turned off so that the next time it is turned on the previous state is restored Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer m Save your data While entering Hibernation Mode the computer saves the contents of memory to the Solid State Drive However for safety sake it is best to save your data manually g Data will be lost if you disconnect the AC adaptor before the save is completed H Do not switch to Hibernation Mode while transferring data to external media such as USB devices memory media or other external memory devices Data will be lost Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits E Saves data to the Solid State Drive when the computer automatically shuts down because of a low battery condition m You can return to your previous working environment immediately when you turn on the computer m Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature m Allows the use
80. erwise stated E SSD is a large capacity storage media which uses Solid State Memory in place of a magnetic disk of the hard disk Under certain unusual conditions of prolonged non use and or exposure to high temperatures the SSD may be vulnerable to data retention errors Legal Footnote Solid State Drive SSD Capacity For more information regarding Solid State Drive SSD Capacity please refer to the Legal Footnotes section RTC battery The internal RTC battery backs up the Real Time Clock RTC and calendar Video RAM The memory in a computer s graphics adaptor used to store the image displayed on a bitmap display The amount of Video RAM available is dependent on the computer s system memory Desktop gt Desktop Assist gt Control Panel gt Appearance and Personalization gt Display gt Adjust resolution The amount of Video RAM can be verified by clicking the Advanced settings button in the Screen Resolution window Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off The display controller also controls the video mode and uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed at a time Therefore software written for a given video mode will run on any computer that supports that mode Legal Footnote Graphics Processing Unit GPU For more inform
81. f be sure to switch to the internal display Optional TOSHIBA Accessories You are able to add a number of options and accessories in order to make your computer even more powerful and convenient to use For reference the following list details some of the items that are available from your reseller or TOSHIBA dealer Universal AC Adaptor If you frequently use your computer at more than one site it may be convenient to purchase an additional AC adaptor to be kept at each site in order to remove the need to always carry the adaptor with you TOSHIBA Mobile TOSHIBA Mobile Tablet Cradle provides the Tablet Cradle following extensibility H Power supply and battery charge m Headphone jack mg USB amp HDMI ports m LAN jack Stylus Pen Stylus Pen can be purchased from your TOSHIBA dealer for use as spare items spare pen tips and a tip draw out tool are included Reserve Pen Reserve Pen can be purchased from your TOSHIBA dealer Use the Reserve Pen in place of the Stylus Pen if it is lost or broken Sound System and Video mode This section describes some of the audio control functions User s Manual 4 30 Volume Mixer The Volume Mixer utility lets you control the audio volume for playback of devices and applications under Windows H To launch the Volume Mixer utility click Desktop and right click on the speaker icon on the Taskbar and then select Open Volume Mixer from the sub menu m To adjust the volume level of spe
82. f Mute is turned to Off Check to make sure the headphone connection is secure Check within the Windows Device Manager application to ensure the sound device is enabled and that the device is properly working Annoying sound is In this instance you may be experiencing feedback heard from either the internal microphone or an external microphone connected to the computer please refer to Sound System and Video mode for further information Volume cannot be adjusted during Windows start up or shut down If you are still unable to resolve the problem contact TOSHIBA Support External monitor Please also refer to Operating Basics and to the documentation supplied with your monitor for further information User s Manual 6 11 Problem Monitor does not turn on No display Display error occurs Wireless LAN User s Manual Problem Cannot access Wireless LAN Procedure After confirming that the monitor s power switch is on you should check the connections to make sure that the power cord adaptor is firmly connected to the monitor and to a working power outlet Try adjusting the contrast and brightness controls on the external monitor Press the function key in order to change the display priority and ensure that it is not set for the internal display only Check to see if the external monitor is connected When the external monitor is set as the primary display device in extended desktop mode it will
83. figuration must be a 2 15P 250V or 1 15P 125V and three pin plug configuration must be 6 15P 250V or 5 15P 125V as designated in the U S National Electrical code handbook and the Canadian Electrical Code Part Il The following illustrations show the plug shapes for the U S A and Canada the United Kingdom Australia Europe and China USA United Kingdom UL approved BS approved Australia Europe AS approved Approved by the appropriate agency Canada China CSA approved CCC approved Information for Wireless Devices Wireless Technology Interoperability T User s Manual The Wireless LAN is compatible with other LAN systems Direct Sequence Spread Spectrum DSSS Orthogonal Frequency Division Multiplexing OFDM radio technology and is compliant to E The IEEE 802 11 Standard on Wireless LANs Revision a b g n or b g n as defined and approved by the Institute of Electrical and Electronics Engineers Bluetooth Cards are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum FHSS radio technology and is compliant to H Bluetooth Specification depending on the model you purchased as defined and approved by the Bluetooth Special Interest Group Logo certification with Bluetooth wireless technology as defined by the Bluetooth Special interest Group This Bluetooth product is not compatible with devices
84. for help Only peripherals complying with the FCC class B limits may be attached to this equipment Operation with non compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception Shielded cables must be used between the external devices and the computer s HDMI micro port Universal Serial Bus USB 3 0 port as well as the HDMI port and External RGB monitor port on the TOSHIBA Keyboard Dock Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user s authority to operate the equipment FCC conditions This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Contact Address TOSHIBA America Information Systems Inc 9740 Irvine Boulevard Irvine California 92618 1697 Telephone 949 583 3000 This information is only applicable for the countries regions where it is required EU Declaration of Conformity User s Manual This product is carrying the CE Mark in accordance with the related European Directives Responsible for CE Marking is TOSHIBA EUROPE GMBH Hammfelddamm 8 41460 Neuss Germany The complete and official EU Declaration of Conformity can be found on TOSHIBA
85. form of a textual message at program startup or in documentation online or textual provided with the package Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the copyright notice this list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgement This product includes cryptographic software written by Eric Young eay cryptsoft com The word cryptographic can be left out if the rouines from the library being used are not cryptographic related 4 Ifyou include any Windows specific code or a derivative thereof from the apps directory application code you must include an acknowledgement This product includes software written by Tim Hudson tih cryptsoft com THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY
86. g on the country and region where you purchased Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC THE VC 1 AND MPEG 4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON COMMERCIAL USE OF A CONSUMER FOR I ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS VIDEO AND OR II DECODING AVC VC 1 AND MPEG 4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA L L C SEE HTTP WWW MPEGLA COM OpenSSL Toolkit License Issues User s Manual LICENSE ISSUES The OpenSSL toolkit stays under a dual license i e both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit See below for the actual license texts Actually both licenses are BSD style Open Source licenses In case of any license issues related to OpenSSL please contact openssl core openssl org OpenSSL License User s Manual Copyright c 1998 2011 The OpenSSL Project All rights reserved Redistribution and use in source and binary forms with or without modification are permitted provided that the following conditions are met 1 Redistributions of source code must retain the above copyright notice thi
87. h millimeters Computer only not including parts that extend beyond the main body Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5 C 41 F to 35 C 20 to 80 95 F noncondensing Non operating 20 C 4 F to 60 C 10 to 90 140 F noncondensing Wet bulb temperature 29 C maximum Conditions Altitude from sea level Operating 60 to 3 000 meters Non operating 60 to 10 000 meters maximum Power Requirements AC adaptor 100 240V AC 50 or 60 Hz cycles per second Computer 19V DC User s Manual 7 1 AC Power Cord and Connectors The power cord s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country region in which it is used All cords must meet the following specifications Wire size Minimum 0 75 mm Current rating Minimum 2 5 amperes Certification agencies User s Manual China CQC U S and Canada UL listed and CSA certified No 18 AWG Type SVT or SPT 2 Australia AS Japan DENANHO Europe Austria OVE Italy IMQ Belgium CEBEC The Netherlands KEMA Denmark DEMKO Norway NEMKO Finland FIMKO Sweden SEMKO France LCIE Switzerland SEV Germany VDE United Kingdom BSI In Europe two conductors power cord must be VDE type HOSVVH2 F or HO3VVH2 F and for three conductors power cord must be VDE type HOSVV F For the United States and Canada two pin plug con
88. he center of the keyboard is used to control the on screen pointer Please refer to the AccuPoint section for details The holder provides firm support to the computer Hooks secure the physical connection between the computer and the keyboard dock I gt eee DC IN 19V A HDMI T User s Manual Docking connector Eject button DC IN 19V jack LAN jack Connects to the computer Begins the computer s disconnect sequence Once the eject button is pressed and the computer cannot communicate with external devices connected to the keyboard dock Undock and re dock the computer to re establish communication The AC adaptor connects to this jack in order to power the computer and charge its internal batteries Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase using the wrong AC adaptor can cause damage to the computer This jack lets you connect to a LAN The adaptor has built in support for Ethernet LAN 10 megabits per second 10BASE T Fast Ethernet LAN 100 megabits per second 100BASE TX and Gigabit Ethernet LAN 1000 megabits per second 1000BASE T Refer to Operating Basics for details m Do not connect any cable other than a LAN cable to the LAN jack It could cause damage or malfunction E Do not connect the LAN cable to a power supply It could cause damage or malfunction HDMI port Universal Serial Bus USB 2 0 port HDMI
89. he computer is on Also try turning the computer off and then on If you are using an AC adaptor verify that the computer is receiving power from the external power source by looking at the Battery indicator If the indicator is glowing the computer is connected to a live external power source The computer will not load advanced options during startup The advanced option will be loaded when you hold down one of the following keys on the keyboard dock during startup The equivalent button operation in tablet mode are also described Advanced option Key amp button operations BIOS utility E F2 while holding down Volume down button press Power button Boot menu m F12 while holding down Volume up button press Power button Recovery options H 0 zero E y Recovery options can also be accessed from Boot menu by selecting HDD J Recovery If your computer starts to load the Operating System instead of desired advanced options follow the steps below 1 In the Settings charm click Power and then select Restart 2 Hold down the corresponding key and then release this key one second after the computer is power on In tablet mode hold down the corresponding button no need to press Power button until the advanced option is loaded 3 Follow the on screen instructions to proceed Hardware and system checklist This section discusses problems caused by your computer s hardware or attached peripherals Basic problems
90. incurred directly or indirectly from errors omissions or discrepancies between the computer and the manual Trademarks Intel Intel SpeedStep the Intel Anti Theft technology logo Intel Core and Centrino are trademarks or registered trademarks of Intel Corporation Windows Microsoft and Windows logo are registered trademarks of Microsoft Corporation User s Manual 1 1 The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG Inc and any use of such marks by Toshiba Corporation and its affiliates is under license The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries sMedio and sMedio TrueLink are trademarks or registered trademarks of sMedio Inc TouchPad is a trademark of Synaptics Inc Secure Digital and SD are trademarks of SD Card Association MultiMediaCard and MMC are trademarks of MultiMediaCard Association QUALCOMM is a trademark of Qualcomm Incorporated registered in the United States and other countries ATHEROS is a trademark of Qualcomm Atheros Inc registered in the United States and other countries Realtek is a registered trademark of Realtek Semiconductor Corporation DTS the Symbol amp DTS and the Symbol together are registered trademarks and DTS Studio Sound is a trademark of DTS Inc DTS Inc All Rights Reserved All other product n
91. ireless communication is often subject to local radio regulations Although Wireless LAN wireless networking products have been designed for operation in the license free 2 4GHz and 5GHz band local radio regulations may impose a number of limitations to the use of wireless communication equipment Radio Frequency E Band 5GHz 5150 5850 MHz Revision a and n E Band 2 4GHz 2400 2483 5 MHz Revision b g and n The range of the wireless signal is related to the transmit rate of the wireless communication Communications at lower transmit range may travel larger distances m The range of your wireless devices can be affected when the antennas are placed near metal surfaces and solid high density materials H Range is also impacted due to obstacles in the signal path of the radio that may either absorb or reflect the radio signal Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5 15 to 5 25GHz frequency range Bluetooth wireless technology User s Manual Some computers in this series have Bluetooth wireless communication function which eliminates the need for cables between electronic devices such as computers printers and mobile phones When it is enabled Bluetooth provides the wireless personal area network environment which is safe and trustworthy that is quick and easy You cannot use the computer s built in Bluetooth functions and an external Bluetooth adapto
92. ity and protects electronic components from abnormal conditions such as a voltage overload from the AC adaptor This can be specified in the Power Options This feature lets you configure the computer in order to save battery power This can be specified in the Power Options This feature automatically turns power to the computer off when the display panel is closed and turns it back on when the display panel is opened This can be specified in the Power Options When battery power is exhausted to the point that computer operation cannot be continued the system automatically enters Hibernation Mode and shuts itself down This can be specified in the Power Options Sleep Mode If you have to interrupt your work you can use this feature to allow you to turn off power to the computer without exiting from your software Data is maintained in the computer s main memory so that when you next turn on the power you can continue working right where you left off Hibernation Mode This feature lets you turn off the power to the computer without exiting from your software The contents of main memory are automatically saved to the Solid State Drive so that when you next turn the power on again you can continue working right where you left off Refer to the Turning off the power section for more details USB Wakeup function This function restores the computer from Sleep Mode depending on the external devices connected to the USB ports
93. l population consult Safety Code 6 obtainablefrom Health Canada s website www hc sc gc ca User s Manual Taiwan Article 12 Without permission granted by the NCC any company enterprise or user is not allowed to change frequency enhance transmitting power or alter original characteristic as well as performance to an approved low power radio frequency devices Article 14 The low power radio frequency devices shall not influence aircraft security and interfere legal communications If found the user shall cease operating immediately until no interference is achieved The said legal communications means radio communications is operated in compliance with the Telecommunications Act The low power radio frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices Using this equipment in Japan In Japan the frequency bandwidth of 2 400MHz to 2 483 5MHz for second generation low power data communication systems such as this equipment overlaps that of mobile object identification systems premises radio station and specified low power radio station 1 Important notice The frequency bandwidth of this equipment may operate within the same range as industrial devices scientific devices medical devices microwave ovens licensed radio stations and non licensed specified low power radio stations for mobile object identification systems RFID used in factory produc
94. led you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel Doing so will automatically delete all collected information from the SSD The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA s obligations under its standard limited warranty in any way TOSHIBA s standard limited warranty terms and limitations apply Starting the TOSHIBA PC Health Monitor i The TOSHIBA PC Health Monitor can be started by clicking Desktop gt Desktop Assist gt Support amp Recovery gt PC Health Monitor The TOSHIBA PC Health Monitor main screen will be displayed and on clicking Please click here to enable TOSHIBA PC Health Monitor the PC Health Monitor Software Notice amp Acceptance screen will be displayed Please carefully read the information displayed Selecting ACCEPT and clicking OK will enable the program By enabling the TOSHIBA PC Health Monitor software you agree with these terms and conditions and to the use and sharing of the collected information Once the program is enabled the TOSHIBA PC Health Monitor screen is displayed and the program will begin monitoring system functions and collecting information A message will be displayed if any changes which may interfere with the operation of the program are detected Follow the instructions displayed on screen in the message TOSHIBA Setup Utility User s Manual TOSHIBA Setup Utilit
95. lem You can also create recovery media and restore the system The following items will be described in this section H Creating Recovery Media Hm Restoring the pre installed software from your created Recovery Media m Restoring the pre installed software from the Recovery Solid State Drive Creating Recovery Media This section describes how to create Recovery Media User s Manual 5 13 User s Manual Be sure to connect the AC adaptor when you create Recovery Media Be sure to close all other software programs except the Recovery Media Creator Do not run software such as screen savers which can put a heavy load on the CPU Operate the computer at full power Do not use power saving features Do not write to the media when the virus check software is running Wait for it to finish then disable virus detection programs including any software that checks files automatically in the background Do not use utilities including those intended to enhance Solid State Drive access speed They may cause unstable operation and damage data Do not shut down log off or Sleep Hibernate while writing or rewriting the media Set the computer on a level surface and avoid places subjected to vibrations such as airplanes trains or cars Do not use on an unstable surface such as a stand A recovery image of the software on your computer is stored on the Solid State Drive and can be copied to either disc media or USB Flash Memory
96. life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication Recharge time varies depending on usage Battery may not charge while computer is consuming full power After going through many charge and discharge cycles the battery will lose its ability to perform at maximum capacity and will need to be replaced This is a normal phenomenon for all batteries To purchase a new battery pack see the accessories information that is shipped with your computer Hard Disk Drive HDD Capacity LCD 1 Gigabyte GB means 10 1 000 000 000 bytes using powers of 10 The computer operating system however reports storage capacity using powers of 2 for the definition of 1 GB 230 1 073 741 824 bytes and therefore shows less storage capacity Available storage capacity will also be less if the product includes one or more pre installed operating systems such as Microsoft Operating System and or pre installed software applications or media content Actual formatted capacity may vary Over a period of time and depending on the usage of the computer the brightness of the LCD screen will deteriorate This is an intrinsic characteristic of LCD technology Maximum brightness is only available when operating in AC power mode Screen will dim when the computer is operated on battery power and you may not be able to increase the brightness of the screen Graphics Processing Unit GPU User s Manual
97. m overheating when the power is turned on or when an AC adaptor is connected to a power outlet even if your computer is in Sleep Mode In this condition observe the following m Never cover your computer or AC adaptor with any object m Never place your computer or AC adaptor near a heat source such as an electric blanket or heater Never cover or block the air vents including those located at the base of the computer m Always operate your computer on a hard flat surface Using your computer on a carpet or other soft material can block the vents mg Always provide sufficient space around the computer Overheating your computer or AC adaptor could cause system failure computer or AC adaptor damage or a fire possibly resulting in serious injury Creating a computer friendly environment User s Manual Place the computer on a flat surface that is large enough for the computer and any other items you are using such as a printer Leave enough space around the computer and other equipment to provide adequate ventilation Otherwise they may overheat To keep your computer in prime operating condition protect your work area from m Dust moisture and direct sunlight E Equipment that generates a strong electromagnetic field such as stereo speakers other than speakers that are connected to the computer or speakerphones H Rapid changes in temperature or humidity and sources of temperature change such as air conditioner
98. may also vary from specifications due to design configuration Under some conditions your computer product may automatically shut down This is a normal protective feature designed to reduce the risk of lost data or damage to the product when used outside recommended conditions To avoid risk of lost data always make back up copies of data by periodically storing it on an external storage medium For optimum performance use your computer product only under recommended conditions Read additional restrictions in your product documentation Contact TOSHIBA technical service and support refer to TOSHIBA support section for more information 64 Bit Computing Certain 32 bit device drivers and or applications may not be compatible with a 64 bit CPU operating system and therefore may not function properly Memory Main System Part of the main system memory may be used by the graphics system for graphics performance and therefore reduce the amount of main system memory available for other computing activities The amount of main system memory allocated to support graphics may vary depending on the graphics system applications utilized system memory size and other factors Battery Life Battery life may vary considerably depending on product model configuration applications power management settings and features utilized as well as the natural performance variations produced by the design of individual components Published battery
99. me Clock RTC battery has run out you will need to set the date and time in the BIOS setup utility by using the following steps 1 Launch the BIOS setup utility Please refer to TOSHIBA Setup Utility section for further information 2 Set the date in the System Date field Set the time in the System Time field 4 Select Exit gt Exit Saving Changes a confirmation message will be displayed 5 Select Yes the BIOS setup utility will end and the computer will restart pa Keyboard problems can be caused by the setup and configuration of the computer please refer to the The Keyboard section for further information User s Manual Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers activated press the FN F11 and try typing again Output to screen is Please refer to your software s documentation to garbled ensure that it is not remapping the keyboard in any way remapping involves changing or reassigning the function of each key If you are still unable to use the keyboard you should contact TOSHIBA Support Internal display panel Apparent computer s display panel problems may be related to the computer s setup and configuration please refer to the TOSHIBA System Settings section for further information Problem Procedure No display Press the function keys to adjust the display priority and to make sure it is not set for output to an external monitor
100. n W56 Device Authorization User s Manual This device obtains the Technical Regulation Conformity Certification and it belongs to the device class of radio equipment of low power data communication system radio station stipulated in the Telecommunications Business Law of Japan E Intel Centrino Advanced N 6235 a g n Wireless LAN and Bluetooth The Name of the radio equipment 6235ANHMW DSP Research Inc Approval Number D111083003 E Intel Centrino Wireless N 2230 Wireless LAN and Bluetooth The Name of the radio equipment 2230BNHMW DSP Research Inc Approval Number D111287003 m Atheros 802 11b g n Wireless LAN Bluetooth The Name of the radio equipment AR5B225 DSP Research Inc Approval Number D110317003 The following restrictions apply H Do not disassemble or modify the device Do not install the embedded wireless module into other device Radio approvals for wireless devices A This equipment is approved to the radio standard by the countries regions in the following table If you use this equipment in the countries regions which are not listed in the table blow please contact TOSHIBA Support Austria Cyprus Finland Hong Kong Indonesia Korea Luxemburg Norway Romania Sweden Belgium Czech Rep France Hungary Ireland Latvia Malta Philippines Slovak Republic Switzerland Bulgaria Denmark Germany Iceland Italy Liechtenstein Monaco Poland Slovenia UK Canada Esto
101. n surface furniture or any other surface that could be marred by exposure to heat since the computer base and AC adaptor s surface increase in temperature during normal use Always place your computer or AC adaptor on a flat and hard surface that is resistant to heat damage Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions 1 Connect the power cord to the AC adaptor Figure 2 3 Connecting the power cord to the AC adaptor 2 pin plug PRS Figure 2 4 Connecting the power cord to the AC adaptor 3 pin plug 7 Either a 2 pin or 3 pin adaptor cord will be included with the computer I depending on the model User s Manual 2 Connect the AC adaptor s DC output plug to the DC IN 19V jack Figure 2 5 Connecting the DC output plug to the computer laptop mode 1 DC IN 19V jack 2 DC output plug Computer appearance depends on the model you purchased Figure 2 6 Connecting the DC output plug to the computer tablet mode 1 DC IN 19V jack 2 DC output plug Computer appearance depends on the model you purchased 3 Plug the power cord into a live wall outlet the Battery indicator should glow Turning on the power This section describes how to turn on the power the Power indicator will then indicate the status Please refer to the Monitoring of power condition section for more information a E After you turn on the power for the first time d
102. n the computer holder without the computer docked otherwise it may cause damage or possibly result in mechanical malfunction To disconnect and remove the computer from the keyboard dock follow the steps below 1 Disconnect and remove all peripheral devices and cables connected to the computer 2 Press the Eject button on the keyboard dock User s Manual 2 4 3 Slide and hold the Release latch to the left unlock position and then slowly lift the computer to release it from the computer holder and completely off the keyboard dock Figure 2 2 Removing the computer from the keyboard dock TOSHI 1 Release latch 2 Computer holder Computer appearance depends on the model you purchased Connecting the AC adaptor A User s Manual Connect the AC adaptor when you need to charge the battery or you want to operate from AC power It is also the fastest way to get started because the battery pack will need to be charged before you can operate from battery power The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volts and to a frequency of either 50 or 60 hertz enabling you to use this computer in almost any country region The adaptor converts AC power to DC power and reduces the voltage supplied to this computer m Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer
103. nia Greece India Japan Lithuania Netherlands Portugal Spain USA User s Manual Legal Footnotes Non applicable Icons CPU User s Manual Certain computer chassis are designed to accommodate all possible configurations for an entire product series Therefore please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis Central Processing Unit CPU Performance Legal Footnotes CPU performance in your computer product may vary from specifications under the following conditions Huse of certain external peripheral products muse of battery power instead of AC power Huse of certain multimedia computer generated graphics or video applications Huse of standard telephone lines or low speed network connections use of complex modeling software such as high end computer aided design applications Huse of several applications or functionalities simultaneously Huse of computer in areas with low air pressure high altitude gt 1 000 meters or gt 3 280 feet above sea level muse of computer at temperatures outside the range of 5 C to 30 C 41 F to 86 F or gt 25 C 77 F at high altitude all temperature references are approximate and may vary depending on the specific computer model please refer to your computer documentation or visit the TOSHIBA website at www pcsupport toshiba com for details CPU performance
104. nnectors may cause access problems Removing a SIM Card To remove the SIM card follow the steps as detailed below 1 Shut down the computer make sure the Power indicator is off 2 To pop the SIM card tray partially open insert a slender object about 10mm such as a straightened paper clip into the eject hole Gently pull to open the SIM card tray 3 Remove the SIM card from the SIM card tray 4 Insert the SIM card tray back into the SIM card slot LAN The keyboard dock has built in support for Ethernet LAN 10 megabits per second 10BASE T Fast Ethernet LAN 100 megabits per second 100BASE TX or Gigabit Ethernet LAN 1000 megabits per second 1000BASE T This section describes how to connect disconnect to a LAN a E 7he Wake up on LAN function consumes power even when the system is off Leave the AC adaptor connected while using this feature User s Manual 4 20 m The Link speed 10 100 1000 megabits per second changes automatically depending on the network conditions connected device cable or noise and so on LAN cable types AN The computer must be configured properly before connecting to a LAN Logging onto a LAN using the computer s default settings could cause a malfunction in LAN operation Check with your LAN administrator regarding set up procedures If you are using Gigabit Ethernet LAN 1000 megabits per second 1000BASE T be sure to connect with a CAT5e cable or higher You cannot use a
105. not display when the computer wakes up from Sleep Mode if the external monitor has been disconnected while in Sleep Mode To keep this from happening do not disconnect the external monitor while the computer is in Sleep or Hibernation Mode Remember to turn off the computer before disconnecting the external monitor When the display panel and an external monitor are set to clone mode and they are turned off by the timer the display panel or the external monitor may not display when turned on again If this occurs press the function key to re set the display panel and external monitor to clone mode Check that the cable connecting the external monitor to the computer is firmly attached If you are still unable to resolve the problem contact TOSHIBA Support Procedure Make sure the computer s Wireless communication function is on If problems persist contact your LAN administrator Bluetooth Problem Cannot access Bluetooth device TOSHIBA support Procedure Check to ensure the computer s Wireless Communication function is on Check to ensure the Bluetooth Manager application is running on the computer and that power to the external Bluetooth device is turned on Check to ensure that no optional Bluetooth Adaptor is installed in the computer the built in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller If you are still unable to resolve the problem contact TOSHIBA
106. nvironments e g environments where a mains voltage of 380 V three phase is used E Medical Environments E Automotive Environments E Aircraft Environments Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA The consequences of the use of this product in non approved working environments may be Interference with other devices or machines in the near surrounding area H Malfunction of or data loss from this product caused by disturbances generated by other devices or machines in the near surrounding area Therefore TOSHIBA strongly recommend that the electromagnetic compatibility of this product should be suitably tested in all non approved working environments before use In the case of automobiles or aircraft the manufacturer or airline respectively should be asked for permission before use of this product Furthermore for general safety reasons the use of this product in environments with explosive atmospheres is not permitted VCCI Class B Information CORBIS PIABRARMRE CT COREL KERK TCE FASS Cee BW CLCWETA CORBMISAPTLE VAL SB ICIEL CRA SNSE SMBS SRT CEMHVET Friar BABE gt TELL RY RWSL TEAL VCCI B Canadian regulatory information Canada only This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian De
107. o not touch the metal contacts You could expose the storage area to static electricity which can destroy data amp Do not turn the computer off or switch to Sleep Mode or Hibernation Mode while files are being copied doing so may cause data to be lost 4 Push the memory media gently until you hear a click Removing a memory media The following instructions apply to all types of supported media devices To remove a memory media follow the steps as detailed below 1 Click the Desktop tile and open the Safely Remove Hardware and Eject Media icon on the Windows Taskbar User s Manual 4 25 Baron Point to memory media and click the left Touch Pad control button Push the memory media until you hear a click to partially release it Grasp the memory media and remove it Insert the dummy card back into the slot If you remove the memory media or turn off the power while the computer is accessing the memory media you may lose data or damage the media Do not remove the memory media while the computer is in Sleep or Hibernation Mode The computer could become unstable or data in the memory media could be lost Do not remove only the miniSD microSD Card while leaving the adaptor in the memory media slot External display Your computer video capabilities can be enhanced with additional displays External displays allows you to share your desktop or extend the desktop area Connecting an external display i User s Man
108. o not turn it off until you have set up the operating system E Volume cannot be adjusted during Windows Setup 1 Press the computer s power button User s Manual 2 7 Figure 2 7 Turning on the power laptop mode 1 Power button Computer appearance depends on the model you purchased Figure 2 8 Turning on the power tablet mode 1 Power button Computer appearance depends on the model you purchased Initial setup The Windows 8 Startup Screen will be the first screen displayed when you turn on the power Follow the on screen instructions on each screen in order to properly install the operating system T When it is displayed be sure to read the License Terms carefully Getting to know Windows For detailed information on what is new and how to operate Windows 8 please refer to the Windows Help and Support Start screen The Start screen is the launching pad for everything you can do in the Windows operating system providing new and easy ways to access User s Manual 2 8 Oo Q w User s Manual everything from your favorite apps and Web sites to your contacts and other important information From the Start screen you can just start typing to search for what you want From there you can easily switch between results for apps files and more Charms Use the Windows Charms to start apps find documents set up system components and perform most other computing tasks By pointing the
109. of the panel power off feature Starting Hibernation Mode To enter Hibernation Mode follow the steps below 1 Click the Settings charm 2 Click Power and then select Hibernate y In order to show Hibernate in Power menu you need to setup according to J the following steps 1 Click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options 2 Click Choose what the power button does or Choose what closing the lid does 3 Click Change settings that are currently unavailable 4 Select the Hibernate check box from Shutdown settings 5 Click the Save changes button Automatic Hibernation Mode The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid In order to define these settings you can follow the steps as described below 1 Click Power Options and then click Choose what the power button does or Choose what closing the lid does 2 Enable the desired Hibernation Mode settings for When I press the power button and When I close the lid 3 Click the Save changes button Data save in Hibernation Mode When you turn off the power in Hibernation Mode the computer will take a moment to save the current data in memory to the Solid State Drive After you turn off the computer and the content of memory has been saved to the Solid State Drive turn off the power to any peripheral devices Do not turn the computer or device
110. ost m Please make sure to use the default Boot Mode option in the BIOS setup utility before restoring 1 Launch the BIOS setup utility Please refer to TOSHIBA Setup Utility section for further information In the BIOS setup screen select Advanced gt System Configuration gt Boot Mode gt UEFI Boot Default If you set the Boot Mode as CSM Boot the recovery media created by Recovery Media Creator will NOT be able to restore If you create a recovery image using advanced recovery tools from Control Panel please also make sure to use the default Boot Mode option UEFI Boot in the BIOS setup utility before restoring 1 Load the Recovery Media into the external Optical Disc Drive or insert the recovery USB Flash Memory into one available USB port 2 Inthe Settings charm click Power and then select Restart 3 Hold down the F12 key and then release this key one second after the computer is power on In tablet mode hold down the Volume up button until the Boot menu is loaded 4 Use the Volume up and the Volume down button to select the appropriate option from the menu according to your actual recovery media and press the Windows button to confirm the selection 5 A menu will be displayed from which you should follow the on screen instructions If you have previously chosen to remove the recovery partition and are trying to create Recovery Media you will see the following message The Recovery Media Creator can no
111. partment of Communications Note that Canadian Department of Communications DOC regulations provide that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la class B respecte toutes les exgences du R glement sur le mat riel brouileur du Canada Following information is only valid for EU member States Disposal of products User s Manual s The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste Integrated batteries and accumulators can be disposed of with the product They will be separated at the recycling centres The black bar indicates that the product was placed on the market after August 13 2005 By participating in separate collection of products and batteries you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health For more detailed information about the collection and recycling programmes available in your country please visit our website http eu computers toshiba europe com or contact your local city office or the shop where you purchased the product A Disposal of batteries and or accumulators Pb Hg Cd
112. ped with a back Web Camera used for recording video or taking photographs Do not point the web camera directly at the sun Do not touch or press strongly on the web camera lens Doing so may reduce image quality Use an eyeglass cleaner cleaner cloth or other soft cloth to clean the lens if it becomes dirty Camera LED back Reserve Pen Reserve Pen slot Wireless communication antennas ID information The Camera LED glows when the Camera is operating A Reserve Pen is stored in the computer and enables direct data entry through the display screen Some models are equipped with a Reserve Pen Please refer to the Tablet Pen section in Chapter 4 Operating Basics The Reserve Pen slot provides storage for the Reserve Pen The computer is equipped with the Wireless LAN Bluetooth antennas Some computers in this series are also equipped with the Wireless WAN antennas The regulatory information applicable to your computer can be identified here Legal Footnote Wireless LAN For more information regarding Wireless LAN please refer to the Legal Footnotes section TOSHIBA Keyboard Dock The following figure shows each important component of the keyboard dock Figure 3 2 Front view of the keyboard dock 1 Touch Pad 7 AccuPoint 2 Touch Pad ON OFF indicator 8 Computer holder 3 TOSHIBA eco indicator 9 Hook 4 Touch Pad control button 10 Docking connector 5 Touch Pad control button 11 Hook 6 Key
113. playback device may not switch automatically In this case in order to set the playback device to the same device as the display output device please adjust the playback device manually by the following steps 1 Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Sound 4 28 T 2 In the Playback tab select the playback device which you want to switch to 3 To use the internal speakers on your computer select Speakers To use the television or the external monitor that you have connected to the computer select a different playback device 4 Click the Set Default button 5 Click OK to close the Sound dialog Settings for display video on HDMI To view video on the HDMI display device be sure to configure the following settings otherwise you may find that nothing is displayed Be sure to use the function key to select the display device before starting to play video Do not change the display device while playing video Do not change the display device under the following conditions E While data is being read or written E While communication is being carried out Select HD Format To select the display mode follow the steps as detailed below Click Desktop gt Desktop Assist gt Control Panel Click Appearance and Personalization Click Display Click Change display settings Click Advanced settings Click List All Modes Select one of the mode at List All Modes NO
114. port can connect with Type A connector HDMI cable Please refer to the HDMI port section for details One Universal Serial Bus port which complies to the USB 2 0 standard is provided on the left side of the keyboard dock Please note that it is not possible to confirm the operation of all functions of all USB devices that are available In view of this it may be noted that some functions associated with a specific device might not operate properly Keep foreign metal objects such as screws staples and paper clips out of the USB port Foreign metal objects can create a short circuit which can cause damage and fire possibly resulting in serious injury The Computer laptop mode The following figure shows the front of the computer when TOSHIBA Keyboard Dock is connected Figure 3 5 Front view of the computer display panel closed Product appearance depends on the model you purchased Figure 3 6 Front view of the computer display panel open 1 Release latch Product appearance depends on the model you purchased Release latch Slide and hold the release latch to the left to disengage the computer from the keyboard dock Please refer to the Connecting TOSHIBA Keyboard Dock section to learn more details User s Manual 3 10 Internal Hardware Components This section describes the internal hardware components of your computer User s Manual The actual specifications may vary depending on the model you
115. r distortion H Dialog enhancement for clear and intelligible vocals E Bass enhancement for rich low frequency production High frequency definition for crisp details Consistent volume level across content To access the utility Click Desktop gt Desktop Assist gt Media amp Entertainment gt DTS Studio Sound U S patents apply to this product See http patents dts com Manufactured under license from DTS Licensing Limited 4 32 Video mode i User s Manual Video mode settings are configured via the Screen Resolution dialog To open the Screen Resolution dialog click Desktop gt Desktop Assist gt Control Panel gt Appearance and Personalization gt Display gt Change display settings If you are running some applications for example a 3D application or video playback you may see some disturbance flickering or frame dropping on your screen If that occurs adjust the resolution of display lowering it until the screen is displayed properly 4 33 Chapter 5 Utilities and Advanced Usage This chapter describes the utilities and special features of this computer and the advanced usage of some utilities Utilities and Applications This section describes the pre installed utilities that come with the computer and details how to start them For further information on their operation you may refer to each utility s online manual help files or README TXT file if applicable 7 All th
116. r information about the presence in our articles of substances included on the candidate list according to article 59 1 of Regulation EC No 1907 2006 REACH in a concentration above 0 1 weight by weight Following information is only for Turkey User s Manual Compliant with EEE Regulations TOSHIBA meets all requirements of Turkish regulation 26891 Restriction of the use of certain hazardous substances in electrical and electronic equipment The number of possible pixel failures of your display is defined according to ISO 9241 307 standards If the number of pixel failures is less than this standard they will not be counted as defect or failure H Battery is a consumption product since the battery time depends on the usage of your computer If the battery can not be charged at all then it is a defect or failure The changes in battery time is not a defect or failure Following information is only for India A The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please visit our website http www toshiba india com or contact call center 1800 200 8674 These symbols may not stick dependin
117. r numeric data input or cursor and page control Arrow Mode To turn on Arrow Mode press FN F10 you are able to access cursor and page control functions by using the keys You are able to press FN F10 again to turn off this overlay function Numeric Mode To turn on Numeric Mode press FN F11 you are able to access numeric characters by using the keys You are able to press FN F11 again to turn off this overlay function Temporarily using normal keyboard overlay on While using the overlay you can temporarily access the normal keyboard functions without having to turn the overlay off 1 Hold down FN key and press any other key this key will operate as if the overlay were off 2 Type upper case characters by holding down FN SHIFT and pressing a character key 3 Release FN key to continue using the selected overlay function Temporarily using overlay overlay off While using the normal keyboard function you can temporarily use the keypad overlay without having to turn it on 1 Hold down FN key and the keyboard will turn on the most recently used overlay function 2 Release FN key to return to normal keyboard operation Temporarily changing modes If the computer is in Numeric Mode you can switch temporarily to Arrow Mode by pressing a SHIFT key while if it is in Arrow Mode you can switch temporarily to Numeric Mode by also pressing a SHIFT key Generating ASCII characters Not all ASCII characte
118. r person using the project where using is a generic term including compiling the project s source code as well as linking it to form a program or executable This program is referred to as a program using the FreeType engine This license applies to all files distributed in the original FreeType Project including all source code binaries and documentation unless otherwise stated in the file in its original unmodified form as distributed in the original archive If you are unsure whether or not a particular file is covered by this license you must contact us to verify this The FreeType Project is copyright C 1996 2000 by David Turner Robert Wilhelm and Werner Lemberg All rights reserved except as specified below 1 No Warranty THE FREETYPE PROJECT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE OF THE FREETYPE PROJECT 2 Redistribution This license grants a worldwide royalty free perpetual and irrevocable right and license to use execute perform compile display copy create derivative works of distribute and sublicense the FreeType Project in both 1 11 User s Manual source and object code forms and derivative works thereof for any purpose
119. r simultaneously For reference Bluetooth wireless technology has the following features Security Two advanced security mechanisms ensure a high level of security H Authentication prevents access to critical data and makes it impossible to falsify the origin of a message m Encryption prevents eavesdropping and maintains link privacy Worldwide operation The Bluetooth radio transmitter and receiver operate in the 2 4GHz band which is license free and compatible with radio systems in most countries in the world Radio links You can easily establish links between two or more devices with these links being maintained even if the devices are not within a line of sight of each other Radio Regulatory Information The Wireless device is must be installed and used in strict accordance with the manufacturer s instructions as described in the user documentation that comes with the product This product complies with the following radio frequency and safety standards Europe Restrictions for Use of 2400 0 2483 5MHz Frequencies in Europe France Outdoor use Military Radiolocation use limited to 10mW Refarming of the 2 4GHz band has e i r p within the been ongoing in recent years to band allow current relaxed regulation Full 2454 2483 5MHz implementation planned 2012 Italy For private use a general authorization is required if WAS RLAN s are used outside own premises For public use a general authorization is requi
120. ra 3 1 TOSHIBA Keyboard Dock ccccceeeeneeeeeeeeceeeeseeenseeeeeseeneneeeensnsneneees 3 7 The Computer laptop mode 2 ccceeceseeeeeeeeeeeeee eee neeeeeeeeeeeeeeeeees 3 10 Internal Hardware Components s sesscseecseeceeeeeeeeeeseneneneneeenees 3 11 Monitoring of power conditions 0 0 0 ceseeeseeeeeeeeeeeeeeeeeeeeeeeseneeneeeeees 3 14 Operating Basics Operating in Tablet Mode ccccececeeeeceeeeeeeeeeeeeeeseaeeeeeesenseeeeeees 4 1 Using the Touch Screen u eeeccseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeenaseeeeeseenensseenes 4 3 Using the Touch Pad iioii sccsd setacseucdcehs scetient danada aiana saa adiasa 4 4 TOSHIBA Pointing Device o oo eee seeeeessseeeeseeeeeeseeeeeseeeeeseeneneseensnseneneees 4 5 The Keyboard siasactecacs cei seicceesseccicccestenzececanasedeceecntut snackiveneiseracstes sean 4 11 Battery ononon aaa aaa aaa 4 15 Wireless WAN Device ssssssssessssenrnnnunrunnrnnnrnnnnnnnnnnnnnnnnnnnnnnnnnennn nunne nnan ne 4 19 LAN e aa aaa aaa eaa os ERE Taa IE ELTS 4 20 Memory MONA ic cccccinssercsccnnsacuecectudtanecndeccnatecnscedsenauiecedevenesneedsscnetacheesets 4 22 External display iraia airas anaana an addaa Anaad daa adanada naai 4 26 Optional TOSHIBA Accessories sssssssessssnunennnrennrrnnnrnnnnnnnnnnnnnn nenne 4 30 Sound System and Video mode ssssssssensssnnssennnrennnrnnnrnnnnrnnnnnnnnn nenne 4 30 Chapter 5 Chapter 6 Chapter 7 User s Manual Utilities
121. rding to the rotation angle detected Figure 4 3 Rotating the computer sideways You can also lock the orientation and always use the computer in Portrait or Landscape mode by pressing the Orientation lock button However under the following conditions the Orientation lock button is disabled and the screen orientation will always be in Landscape mode The computer is in laptop mode The computer is connected to the optional cradle described in Optional TOSHIBA Accessories section Avoid having direct contact with the other edges of the hand held device while the wireless device is turned on and transmitting Only factories installed wireless transmitter can be used with this hand held device to satisfy RF exposure compliance In the Portrait mode some drivers utilities may not perform install and uninstall operation If it occurs switch to the Landscape mode to proceed Calibrating digital compass If you have downloaded a compass application to use this feature please note that the performance of any compass feature will vary depending on environmental conditions For example any source using electromagnetic or radio waves Before using any compass feature the compass needs to be calibrated for accuracy To calibrate please disconnect the AC adaptor and remove all peripherals cables and then horizontally rotate the computer with the power on several times as shown in the illustration below Please note this is the most effectiv
122. red Luxembourg Implemented General authorization required for network and service supply Norway Implemented This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny Alesund Russian Only for indoor applications Federation Restrictions for Use of 5150 5350MHz Frequencies in Europe Italy For private use a general authorization is required if WAS RLAN s are used outside own premises Luxembourg Implemented General authorization required for network and service supply User s Manual 7 7 Russian Limited Federation e i r p 100mW Permitted to use only for indoor applications closed industrial and warehouse areas and on board aircraft 1 Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight 2 Permitted to use for public wireless access local networks on board aircraft during a flight at the altitude not less than 3000m Restrictions for Use of 5470 5725MHz Frequencies in Europe Italy Luxembourg Implemented Russian Limited Federation For private use a general authorization is required if WAS RLAN s are used outside own premises General authorization required for network and service supply e i r p 100mW Permitted to use only for indoor applications closed industrial and warehouse areas and on board aircraft 1 Permitted to use for lo
123. refer to the Sound System and Video mode section for more information Press this button to show the Start screen Press this button to turn the computer s power on or off gt D User s Manual Force Shut down hole Insert a slender object such as a needle into this Orientation lock button Volume up down buttons Power indicator Battery indicator Headphone Microphone combo jack hole to force shut down the computer when the system is hang up Press to lock unlock automatic rotation of the screen orientation Press these buttons to increase or decrease the volume The Power indicator normally glows white when the computer is turned on However if you turn the computer off into Sleep Mode this indicator will flash white The Battery indicator shows the condition of the DC IN and the battery s charge white indicates the battery is fully charged while the power is being correctly supplied from the AC power adaptor Please refer to the Monitoring of power conditions section for more information on this feature A 3 5 mm mini headphone microphone combo jack enables connection of a monaural microphone or a stereo headphone Both the internal and external microphones will be disabled if you use a headset other than the type as shown below Universal Serial Bus USB 3 0 port Mic i Ground _ Right p Lett One Universal Serial Bus port which complies to the USB 3 0 standard is provided
124. rol Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Properties window click the Buttons tab 3 Set the double click speed as required and click OK In this instance you should initially try changing the speed setting within the Mouse Control utility 1 To access this utility click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Properties window click the Pointer Options tab 3 Set the pointer speed as required and click OK Adjust the touch Sensitivity To access it click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse If you are still unable to resolve the problem contact TOSHIBA Support USB mouse Problem On screen pointer does not respond to mouse operation Double clicking does not work The on screen pointer moves too fast or too slow The on screen pointer moves erratically USB device Procedure In this instance the system might be busy Try moving the mouse again after waiting a short while Remove the mouse from the computer and then reconnect it to a free USB port in order to ensure it is firmly attached In this instance you should initially try changing the double click speed setting within the Mouse Control utility 1 To access this utility click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Prope
125. rs can be generated using normal keyboard operation but you are able to generate these characters using their specific ASCII codes 1 Hold down ALT with the overlay on or ALT FN with overlay off 2 Using the overlay keys type the ASCII code of the character you require 3 Release ALT or ALT FN the ASCII character will appear on the display screen Touch keyboard User s Manual Touch keyboard is an on screen virtual keyboard allowing you to type on the touch screen Touch keyboard provides a full size keyboard a thumb keyboard with keys split on either side of the screen and it can also switch to a handwriting panel To use the touch keyboard tap in an area where you can type The keyboard will open automatically Battery To manually open the touch keyboard please follow either of the below E Inthe Settings charm click Keyboard gt Touch keyboard and handwriting panel H Click the keyboard icon in the taskbar of your Windows desktop This section explains battery types use recharging methods and handling Battery types The computer has different types of batteries Battery pack When the AC adaptor is not connected the computer s main power source is this lithium ion battery pack also referred to in this manual as the main battery Real Time Clock RTC battery The Real Time Clock RTC battery provides power for the internal real time clock and calendar function and also maintains the syst
126. rties window click the Buttons tab 3 Set the double click speed as required and click OK In this instance you should initially try changing the speed setting within the Mouse Control utility 1 To access this utility click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse 2 Within the Mouse Properties window click the Pointer Options tab 3 Set the pointer speed as required and click OK The elements of the mouse responsible for detecting movement might be dirty please refer to the documentation supplied with the mouse for instructions on how to clean it If you are still unable to resolve the problem contact TOSHIBA Support In addition to the information in this section please also refer to the documentation supplied with your USB device User s Manual Problem Procedure USB device does not Remove the USB device from the computer and work then reconnect it to a free port in order to ensure it is firmly attached Ensure that any required USB device drivers are properly installed to achieve this you should refer to both the device documentation and the operating system documentation Sound system In addition to the information in this section please also refer to the documentation supplied with your audio device Problem Procedure No sound is heard Press the function keys to increase or decrease volume Check the software volume settings Please check to see i
127. s back on immediately Wait a moment to let all capacitors fully discharge User s Manual 2 13 Chapter 3 The Grand Tour This chapter identifies the various components of the computer it is recommended that you become familiar with each before you operate the computer Legal Footnote Non applicable Icons For more information regarding Non applicable Icons please refer to the Legal Footnotes section Si Please handle your computer carefully to avoid scratching or damaging the surface The Computer The following figure shows each important component of the computer User s Manual 3 1 Figure 3 1 The computer in tablet mode o 6500 6 68 a eo ea ea 1 Display screen 15 HDMI micro port 2 Web Camera front 16 Memory media slot 3 Web Camera LED 17 SIM card slot 4 Ambient light sensor not shown 18 DC IN 19V jack 5 Microphone 19 Docking interface 6 Windows button 20 Hook holes 7 Power button 21 Stereo speakers 8 Force shutdown hole 22 Cooling vents 9 Orientation lock button 23 Web Camera back 10 Volume up down button 24 Web Camera LED 11 Power indicator 25 Reserve Pen 12 Battery indicator 26 Reserve Pen slot 13 Headphone Microphone combo jack 27 Wireless communication antennas not shown 14 Universal Serial Bus USB 3 0 port 28 ID information Provided with some models Product appearance depends on the model you purchased User s Manual 3 2 T i
128. s list of conditions and the following disclaimer 2 Redistributions in binary form must reproduce the above copyright notice this list of conditions and the following disclaimer in the documentation and or other materials provided with the distribution 3 All advertising materials mentioning features or use of this software must display the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 4 The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission For written permission please contact openssl core openssl org 5 Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project 6 Redistributions of any form whatsoever must retain the following acknowledgment This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT INDIRECT INCIDENTAL SPECIAL EXEMPLARY OR CONSEQUENTIAL
129. s main memory so that when you turn on the power again you can continue working right where you left off 2 10 T User s Manual When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled always completely shut down the computer This includes turning off any wireless communication functionalities and cancelling settings that reactivate the computer automatically such as a timer recording function Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre programmed tasks or preserve unsaved data which could interfere with aviation or other systems possibly causing serious injury Before entering Sleep Mode be sure to save your data H Do not switch to Sleep Mode while transferring data to external media such as USB devices memory media or other external memory devices Data will be lost E The computer will automatically go into Sleep Mode according to the settings in the Power Options to access it click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options To prevent the computer from automatically entering Sleep Mode disable Sleep Mode within the Power Options E 7o restore the operation of the computer from Sleep Mode press the power button or any key on the keyboard dock for a short amount of time Please note that keyboard keys can only be used if the Wak
130. s web site http epps toshiba teg com on the Internet User s Manual CE compliance This product is labeled with the CE Mark in accordance with the applicable European Directives notably RoHS Directive 2011 65 EU Radio Equipment and Telecommunications Terminal Directive 1999 5 EC Ecodesign Directive 2009 125 EC ErP and the related implementing measures This product and the original options are designed to observe the related EMC Electromagnetic Compatibility and safety standards However TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented In this case the persons who have connected implemented those options cables have to provide assurance that the system PC plus options cables still fulfils the required standards To avoid general EMC problems the following guidance should be noted B Only CE marked options should be connected implemented m Only best shielded cables should be connected Working environment This product was designed to fulfil the EMC Electromagnetic Compatibility requirements to be observed for so called Residential commercial and light industry environments TOSHIBA do not approve the use of this product in working environments other than the above mentioned Residential commercial and light industry environments For example the following environments are not approved E Industrial E
131. significant system conditions This application recognizes the system and individual component serial numbers and will track specific activities related to the computer and their usage The collected information includes device operation time and number of actuations or status changes i e number of power button and FN key combination uses AC adaptor battery LCD fan SSD sound volume wireless communication functionalities and USB information date of initial system use and also computer and device usage i e power settings battery temperature and recharging CPU memory backlight illumination time and temperatures for various devices The stored data uses a very small portion of the total Solid State Drive capacity approximately 10MB or less per year This information is used to identify and provide a notification of system conditions which may effect the performance of your TOSHIBA computer It 5 11 may also be used to help diagnose problems should the computer require service by TOSHIBA or TOSHIBA s authorized service providers Additionally TOSHIBA may also use this information for quality assurance analysis Subject to the use restrictions above the SSD data logged may be transferred to entities located outside of your country or region of residence e g European Union Those countries may or may not have the same data protection laws or data protection levels as required by your home country or region Once enab
132. sword You can launch the BIOS setup utility to set change or delete the HDD Password or HDD Master Password Please refer to TOSHIBA Setup Utility section for further information fyou forget your HDD User Password TOSHIBA will NOT be able to assist you and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE TOSHIBA will NOT be held responsible for any loss of any data any loss of use or access to your HDD or for any other losses to you or any other person or organization that result from the loss of access to your HDD If you can t accept this risk don t register the HDD User Password E When saving the HDD User Password shut down or restart the computer If the computer is not shut down or restarted the saved data may not be correctly reflected For more information on shutting down or restarting the computer refer to Turning on the power Supervisor Password If you set a Supervisor Password some functions might be restricted when a user logs on with the User Password To set a Supervisor Password Desktop gt Desktop Assist gt Tools amp Utilities gt Password Utility gt Supervisor Password This utility lets you do the following H Register or delete the Supervisor Password m Specify restrictions for general users Starting the computer by password User s Manual If you have already registered a user password there is one way to start the computer m Enter the password manually
133. t Device button under the chosen device tab 4 31 Information Click the Information button to view hardware information software information and language setting Power Management The audio controller in your computer can be turned off when the audio function is not used To adjust the configuration of audio power management click the Power Management button m When audio power management is enabled the circle button at the upper left of the Power Management is blue and convex m When audio power management is disabled the button is black and concave Speaker Configuration Click the Auto Test button gt to confirm the internal speakers or the headphone sound is coming from the right direction Default Format You can change the sample rate and bit depth of sound DTS Studio Sound User s Manual DTS Studio Sound is a premium audio enhancement suite that utilizes revolutionary audio technology to provide the most immersive and realistic listening experience ever offered for a two speaker playback environment DTS Studio Sound provides the following features m Advanced audio rendering to match 2D and 3D video content for enveloping surround sound m Accurate placement of audio cues for immersive surround sound from any PC speaker configuration laptop desktop speakers or headphones E Broad sweet spot with elevated sound image E Maximum volume output delivering maximum volume without creating clipping o
134. t be launched because there is no recovery partition When there is no recovery partition the Recovery Media Creator cannot make Recovery Media However if you have already created a Recovery Media you can use it to restore the recovery partition If you have not created Recovery Media please contact TOSHIBA support for assistance Restoring the pre installed software from the Recovery Solid State Drive A portion of the total Solid State Drive space is configured as a hidden recovery partition This partition stores files which can be used to restore pre installed software in the event of a problem If you subsequently set up your Solid State Drive again do not change delete or add partitions in a manner other than specified in the manual otherwise you may find that space for the required software is not available In addition if you use a third party partitioning program to reconfigure the partitions on your Solid State Drive you may find that it becomes impossible to setup your computer e Make sure that the AC adaptor is connected during the restoring process AN When you reinstall the Windows operating system the Solid State Drive may be reformatted and all data may be lost In the Settings charm click Power and then select Restart 2 Hold down 0 zero key and then release this key one second after the computer is power on In tablet mode hold down the Volume up button until the Boot menu is loaded an
135. t of the memory media slot Never allow metal objects such as screws staples and paper clips to enter the computer or Keyboard Foreign metal objects can create a short circuit which can cause computer damage and fire possibly resulting in serious injury se H Please note that an adaptor is required to use miniSD microSD Card T E Please note that not all memory media have been tested and verified to work correctly Therefore it is not possible to guarantee that all memory media will operate properly E The slot does not support Magic Gate functions Figure 4 17 Examples of memory media Secure Digital SD Card microSD card adaptor and microSD card User s Manual 4 22 MultiMediaCard MMC Points to note about the memory media card SD SDHC SDXC memory cards comply with SDMI Secure Digital Music Initiative which is a technology adopted to prevent unlawful copy or playback of digital music For this reason you cannot copy or playback protected material on another computer or other device and you may not reproduce any copyrighted material except for your personal enjoyment Below is a simple explanation for distinguishing SD memory cards from SDHC memory cards and SDXC memory cards m SD SDHC and SDXC memory cards appear the same externally However the logo on memory cards is different so pay careful attention to the logo when purchasing y The SD memory card logo is S5 E The SDHC memory card logo is 92
136. t read a file Pointing device Procedure Remove the memory media card from the computer and then reinsert it in order to ensure it is firmly connected If the problem persists then you should refer to the documentation supplied with your memory media card for further information Remove the memory media card from the computer and check to ensure that it is not write protected Check to ensure the required file is actually on the memory media card that is inserted into the computer If you are still unable to resolve the problem contact TOSHIBA Support If you are using a USB mouse you should also refer to both the USB mouse section and the documentation supplied with your mouse User s Manual Touch Pad Problem The Touch Pad does not work On screen pointer does not respond to pointing device operation Double tapping Touch Pad does not work The on screen pointer moves too fast or too slow The reaction of Touch pad is either too sensitive or not sensitive enough Procedure Check the Device Select settings Click Desktop gt Desktop Assist gt Control Panel gt Hardware and Sound gt Mouse In this instance the system might be busy Try moving the mouse again after waiting a short while In this instance you should initially try changing the double click speed setting within the Mouse Control utility 1 To access this utility click Desktop gt Desktop Assist gt Cont
137. ted even if Intel Rapid Start Technology is disabled E Intel Rapid Start Technology can be used only for Windows 8 E The Windows restore time from Hibernation Mode depends on the amount of system memory used in the computer Monitoring of power conditions Power conditions The computer s operating capability and battery charge status are affected by different power conditions including whether an AC adaptor is connected and what the charge level is for that battery The LED in the table below refers to the Battery indicator i Power on Power off no operation AC adaptor Battery fully e Operates e No charge connected charged No charge e LED white e LED white Battery partially Operates Quick charge charged or no e Charge LED amber charge e LED amber User s Manual 3 14 Power on Power off no operation AC adaptor Remaining e Operates not battery capacity LED off connected is above low battery trigger point Remaining e Operates battery capacity LED flashes is below low amber battery trigger point Remaining Computer shuts battery capacity down is exhausted Battery indicator Check the Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected The following indicator conditions should be noted Flashing amber The battery charge is low The AC adaptor must be connected in order to recharge the battery Amber Indicates the
138. tion lines Other Radio Stations 1 Before using this equipment ensure that it does not interfere with any of the equipment listed above 2 If this equipment causes RF interference to other radio stations promptly change the frequency being used change the location of use or turn off the source of emissions 3 Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations 2 Indication for Wireless LAN The indication shown below appears on this equipment 1 2 34 I l 2 4 This equipment uses a frequency of 2 4GHz DS This equipment uses DS SS modulation OF This equipment uses OFDM modulation 4 The interference range of this equipment is less than 40m This equipment uses a frequency bandwidth from 2 400MHz to 2 483 5MHz It is possible to avoid the band of mobile object identification systems arons 3 Indication for Bluetooth The indication shown below appears on this equipment 1 2 3 4 2 4 This equipment uses a frequency of 2 4 GHz FH This equipment uses FH SS modulation 1 The interference range of this equipment is less than 10m This equipment uses a frequency bandwidth from 2 400 MHz to 2 483 5 MHz It is impossible to avoid the band of mobile object identification systems BONS 4 About the JEITA 5GHz Wireless LAN supports W52 W53 W56 Channel IEEE802 11b g n IEEE802 11a
139. ual Your computer comes with a built in display but you can also connect other external displays via available ports on the computer HDMI port and External RGB monitor port on the keyboard dock can not be connected for use at the same time If both ports are connected only HDMI port is activated Some models may include the Triple Monitor function that can display image on Triple Monitor independently External RGB monitor port An external analog monitor can be connected to the External RGB monitor port on the keyboard dock To connect an external analog monitor follow the steps as detailed below 1 Connect the RGB cable to the External RGB monitor port 4 26 User s Manual Figure 4 20 Connecting the RGB cable to the External RGB monitor port 1 External RGB monitor port 2 RGB cable There are no fastening screws for an external monitor cable on the External RGB monitor port However external monitor cables which have connectors with fastening screws can still be used 2 Turn the external monitor s power on When you turn on the power the computer will automatically recognize the monitor and determine whether it is a color or monochrome device When displaying desktop on an external analog monitor desktop is sometimes displayed on the center of the monitor with black bars around desktop with small size At that time please read the manual of the monitor and set the display mode which is supporting at the
140. ually review and interpret the extensive research literature In some situations or environments the use of Wireless products may be restricted by the proprietor of the building or responsible representatives of the organization These situations may for example include m Using the Wireless products equipment on board of airplanes or E In any other environment where the risk of interference to other devices or services is perceived or identified as harmful If you are uncertain of the policy that applies on the use of wireless devices in a specific organization or environment e g airports you are encouraged to ask for authorization to use the Wireless device prior to turning on the equipment Wireless LAN Technology A User s Manual The computer s wireless communication function supports some wireless communication devices Only some models are equipped with both Wireless LAN and Bluetooth functions B Do not use the Wireless LAN Wi Fi or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields Interference from a microwave oven or other source can disrupt Wi Fi or Bluetooth operation User s Manual E Turn all wireless functionalities off when near a person who may have a cardiac pacemaker implant or other medical electric device Radio waves may affect pacemaker or medical device operation possibly resulting in serious injury Follow the instruction for your me
141. vents or heaters E Extreme heat cold or humidity H Liquids and corrosive chemicals Stress injury Carefully read the nstruction Manual for Safety and Comfort It contains information on the prevention of stress injuries to your hands and wrists that can be caused by extensive keyboard use It also includes information on work space design posture and lighting that can help reduce physical stress Heat injury B Avoid prolonged physical contact with the computer If the computer is used for long periods its surface can become very warm While the temperature will not feel hot to the touch if you maintain physical contact with the computer for a long time for example if you rest the computer on your lap or if you keep your hands on the palm rest your skin might suffer a low heat injury ifthe computer has been used for a long time avoid direct contact with the metal plate supporting the various interface ports as this can become hot mH The surface of the AC adaptor can become hot when in use but this condition does not indicate a malfunction If you need to transport the AC adaptor you should disconnect it and let it cool before moving it H Do not lay the AC adaptor on a material that is sensitive to heat as the material could become damaged Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer s components or otherwise cause
142. y It is recommended that the AC adaptor be connected while TOSHIBA Media Player is running Power saving features may interfere with smooth playback When TOSHIBA Media Player is used with a battery power set the Power Options to Balance The screen saver is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos The computer will not enter Sleep Hibernation and shut down mode automatically while TOSHIBA Media Player is running The display automatic power off function is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos The Resolution function was specially adjusted for the internal monitor Hence please turn OFF Resolution when viewing on external monitor Playback of high bit rate content may cause frame dropping audio skipping or decrease in computer performance Tap click the Refresh button on app commands to refresh the content displayed on Library Screen It won t be refreshed automatically If sleep hibernation shutdown or reboot operation is in process during uploading the files to SkyDrive the operation will not be properly completed This app doesn t support to playback content protected by DRM If you try to play DRM protected content with Resolution On state this app may be closed Photos uploaded to SkyDrive are limited to a maximum resolution of 2048 x 2048 pixels Any photo over that resolution will be scaled proportionally to a maximum size of
143. y click Desktop gt Desktop Assist gt Support amp Recovery gt PC Health Monitor For details on TOSHIBA PC Health Monitor see the help file TOSHIBA Resolution The plug in lets you upconverts wmv and mp4 Plug in for Windows videos on Windows Media Player Media Player For more information please refer to the TOSHIBA Resolution Plug in for Windows Media Player Help To access it click Desktop gt Desktop Assist gt Media amp Entertainment gt TOSHIBA Resolution Plug in for Windows Media Player Help You may not have all the software listed above depending on the model you purchased To access the setup files of the drivers utilities type Applications from the Start screen and then click Applications and Drivers from the list that appears TOSHIBA Media Player by sMedio TrueLink application is not included in the setup files above but can be downloaded from Windows Store Special features User s Manual The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use Access each function using the following procedures 1 To access the Power Options click Desktop gt Desktop Assist gt Control Panel gt System and Security gt Power Options Display automatic This feature automatically cuts off power to the power off 1 computer s display panel when there is no keyboard input for a specified time with power b
144. y is a BIOS setup utility that provides you a menu based user interface so that you can easily view and change BIOS settings To enter the BIOS setup utility follow the steps below 1 Save your work 2 Inthe Settings charm click Power and then select Restart 3 Hold down the Volume down button until TOSHIBA Setup Utility is loaded If TOSHIBA Keyboard Dock is connected the BIOS setup utility can also be launched through the keyboard operation 1 Save your work 2 Inthe Settings charm click Power and then select Restart 3 Hold down the F2 key and then release this key one second after the computer is power on To save the changes and exit the utility press the F10 key and proceed by selecting Yes with the keyboard dock or select Exit gt Exit Saving Changes gt Yes The computer will restart immediately Navigating the utility TOSHIBA Setup Utility can be navigated through the touch screen or using the provided Stylus Pen Some buttons on the computer are also designated to execute the corresponding key function on the keyboard dock Details are described as follows Button Key Function Windows Enter key Proceed or confirm operation Volume up Up arrow key Select an item Volume down Down arrow key Select an item Orientation lock Turn on off the virtual on screen keyboard System Recovery There is a hidden partition allocated on the Solid State Drive for the System Recovery Options in the event of a prob
145. you may destroy valuable problem related information that can help solve the problem m Observe what is happening write down what the system is doing and what actions you performed immediately before the problem occurred Make a screenshot of the current display Please also be aware that the questions and procedures described in this chapter are meant only as a guide they are not definitive problem solving techniques In reality many problems can be solved simply but a few may require help from TOSHIBA Support if you find you need to consult others be prepared to describe the problem in as much detail as possible Preliminary checklist User s Manual You should always consider the simplest solution first the items detailed in this checklist are easy to fix and yet can cause what appears to be a serious problem m Make sure you turn on all peripheral devices before you turn on the computer this includes your printer and any other external device you are using H Before you attach an external device you should first turn the computer off then when you turn the computer back on again it will recognize the new device m Make sure all optional accessories are configured properly in the computer s setup program and that all required driver software has been loaded please refer to the documentation included with the optional accessories for further information on its installation and configuration Check all cables to ensur

Download Pdf Manuals

Related Search

Related Contents

Projeto de Inovação de Stacker Elétrico 1500 kg / 3,5 m  Série AMJ - SMC ETech  Fusion 2010 - Sûreté du Québec  SoftBank 201M 取扱説明書  Bingo Owner`s Manual  Data Sheet - Mouser Electronics  取扱説明書 - M  

Copyright © All rights reserved. Failed to retrieve file