WLE2-POE-S
Contents
1. and peripheral devices when installing and using this product Strongly recommended Q Do not attempt to disassemble or repair this product It may result in failure electric shock or fire We may refuse repair if the seal and cover of this product are removed Insert the AC adapter firmly into the AC socket recommended Using the equipment without the AC adapter firmly inserted may cause a short circuit or overheating or result in fire or electric shock Do not damage process overheat or attempt to repair the power supply cable as this may result in fire or electric shock Prohibit When installing the equipment do not crimp the power supply cable between walls racks tanks or similar e Do not place heavy objects on the power supply cable or pull the cable e Do not place the power supply cable close to heat sources or overheat the cable e When removing the power supply cable be sure to remove it by holding the plug e Do not bend the cable past its natural bending radius e Do not move equipment with the power supply cable still connected If the power supply cable is damaged consult your dealer Install the equipment in a location where children cannot reach the interior of the electrical equipment cables or connectors Strongly recommended one Failure to do so may result in injury Do not handle the product with wet hands Prohibit Doing so when the AC adapter is conne2. BUFAL WLE2 POE S User s Manual Thank you for purchasing the WLE2 POE S Read this manual carefully before using the product to be sure of correct usage After reading store the manual in a safe place for future reference Product Overview The WLE2 POE S Power Supply Adapter is an adapter for supplying power to the AirStation or the BroadStation Using this product enables compatible AirStations or BroadStations to be used in locations that are not provided with a nearby power supply Package Contents The product is packaged with the following items Contact your dealer if any item is not included in the package Supply Adapter This product sss sessssessseresnereernererrneren 1 AC Adapter Connect the attached power supply cable AUFFALD POE PoE Supply POE port Connect to the POE compat LAN port Connect to hub etc ible products or Receiver Adapter Power indicator Lit green when the product is connected to the AC outlet Power supply Cable c ecccccceeeeteeeeeeeeeseeeeeaeeseeaeeeneeeenaees 1 User s manual this data Sheet 0 eee eee eseereeeeeeeeeeees 1 User s registration card and warranty certificate 1 Note After detaching the user s registration card from the warranty certificate be sure to fill out the required information and return to us Store the warranty certificate in a safe place Note Always refer to any additional information
3. cted to the AC power outlet may result in electric shock Doing so even if the product is not connected to the power outlet may cause the product to malfunction Q Do not use the WLE2 POE S in bathrooms or other locations with high water content or humidity Using the device under these conditions may result in fire or electric shock If smoke an unusual odor or strange sound is emitted from the product remove the plug from the AC power supply socket Remove the a i Continuing to use the product under these conditions may result in a short circuit fire or electric shock Consult the your dealer immediately Do not drop the product or subject it to severe shock If the product is subjected to such conditions remove the plug from the AC power supply socket a Remove the a i Continuing to use the product under these conditions may result in a short circuit fire or electric shock Consult your dealer immediately Do not allow the product to come in contact with liquid or foreign matter If liquid or foreign matter enters the product remove the plug from the AC power supply socket Remove the power supply aes ae j 2 ae plug Continuing to use the product under these conditions may result in a short circuit fire or electric shock Consult the your dealer immediately es CAUTION Thoroughly read the user s manuals for each PC and peripheral device and handle each device according to the manufacturers
4. emark symbols are not indicated in this manual E Specifications designs and other descriptions in this manual are subject to change without notice E This manual has been carefully prepared however feel free to contact your nearest sales representative if you have any questions or problems In addition please note that MELCO INC shall not be liable for any expenses incurred due to damage or loss arising from use of this product even though MELCO INC has been advised of the possibility of such damage E This product is designed for home or office use as a general purpose OA device MELCO INC shall accept no liability for any damage incurred by using the product for any other purpose e Do not use the product for applications that must comply with high safety requirements such as medical instruments or any systems directly or indirectly related to saving or sustaining life e If using the product for applications with devices and computer systems requiring higher reliability than general purpose OA devices be sure to configure the system with an appropriate safety design and measures against failure Ne m WLE2 POE S User s Manual Melco Inc 14 February 2003 First revision PY00 28214 DM10 01
5. equiring the WLE POE R7 sold separately e WLA L11G WLAR L11G L WLAR L11 S WLAR L11 M_ e WLA AWCG Models Requiring the WLE POE R33 sold separately e WBR B11 WLA G54 e WLA2 S11 e WBR G54_ e BLR TX4S Specifications 100Mbps 100BASE TX 100BASE TX 10BASE T dual purpose port x 1 POE Port only for models which compatible with POE WLE POE R7 and WLE POE R33 LAN port 100BASE TX 10BASE T dual purpose port x 1 for connecting a hub or PC Input AC adapter 100 to 240 VAC 50 60 HzV Output POE port Power supply 48 VDC max max 0 295mA 14 15W Humidity 20 to 80 no condensation Maximum output current Maximum current consumption Operating environment Temperature 0 to 40 C Dimensions mm 109 x 45 x 235 mm W x D x H Weight 240g Using this device in a domestic environment may result in electromagnetic interference Therefore the user may need to take appropriate measures in such situations If any malfunction occurs apply the following measures Increase the distance between this product and any televisions or radios Change the directional angle between this product and any televisions or radios Port Specifications e LAN port 12545678 TT P 2 Rb _ Receive datat Connector form 8 Not Use position RJ 45 Not Use moduarjack 6 TD Senddatat _ Not Use 8 Not Use e POE port 1 RDF Receive data 2 RD Receive data 5 Power Power sup
6. hub or computer Connect the LAN port of the Receiver Adapter to the AirStation or BroadStation Connect the DC cable of the Receiver Adapter to the DC connector of the AirStation or BroadStation 4 Connect the POE port of the WLE2 POE S to the POE port of the Receiver Adapter using Cat 5 network cable or higher If network cable lower than Cat 5 is used the power may not be supplied to the AirStation or BroadStation 5 Connect the power cable to the AC Adapter of the WLE2 POE S and then insert the plug into the AC power outlet AC outlet LAN cable AC adapter 5 DC cable This product WLE2 POE S LAN port Receiver Adapter wiv Ce H a POE port Use a Cat 5 network cable or higher DC connector AirStation or BroadStation Specifications Refer to the product catalog or Melco homepage http www airstation com english for details on the most recent products and compatible models Compatible Products The WLE2 POE S can be used to supply power to the following Products as of February 2003 Always use this product to supply power to the following products Supplying power to other products may result in damage or burnout of the equipment Refer to the Melco homepage http www airstation com english for details on the most recent compat ible models E Models Compatible with POE e WLM WLMR WLN2 series E Models Not Compatible with POE Models R
7. instructions Strongly recommended Do not install the product in the following locations as doing so may result in electric S shock or fire or may adversely affect the equipment Prohibit e Locations with strong magnetic fields as this may result in damage e Locations with static electricity as this may result in damage e Locations prone to vibration as this may result in injury or damage e Locations that are not level as this may result in rolling falling or injury e Locations in direct sunlight as this may result in damage or deformation e Locations close to fire or subject to heating as this may result in damage or deformation e Locations where there is a danger of current leakage as this may result in damage or electric shock e Locations where there is a danger of water leakage as this may result in damage or electric shock To prevent damage due to static electricity before touching the equipment first touch a nearby metal object such as a door handle or metal window blinds to recone SYeq discharge any static electricity from your body Static electricity from your body may result in damage to the equipment Remove the dust from all connectors and do not touch the connecters Strong so ogs recommended Dust may result in failure in performance Do not obstruct or place other devices against the air vents or fans Prohibit This may result in failure in performance D
8. it products This product does not have a repeater function The total cable length from other device con nected to the product to the the POP compatible product is 100 m max total length of 1 and 2 in the following diagram Connect the POE compatible product to the POE port using Cat 5 network cable or higher Using a different cable may prevent the supply of power 2 Connect the hub or PC to the Power Supply Adapter s LAN port 3 Connect the AC adapter to the AC outlet AC outlet LAN cable 3 AC adapter l Is TFA o 2 S LEST A POE compatible AirStation POE port LAN port Hub etc Use a Cat 5 network cable or higher Supplying Power to non POE compatible AirStations A WLE POE R7 or WLE POE R33 Receiver Adapter sold separately is required when supplying power to an AirStation or BroadStation that does not support Power Over Ethernet POE Use the following procedure to supply power to non POE compatible AirStations or BroadStations S Do not connect a hub or PC to the POE port Doing so may result in damage or burnout of the hub or PC Connect this product to a Receiver Prohibit Adapter s POE port The WLE2 POE S and the Receiver Adapter do not have a repeater function The total cable length from other device connected to the product s LAN port to the AirStation or BroadStation total length of 1 2 and 4 in the following diagram is 100 m max 1 Connect the LAN port of the WLE2 POE S to the
9. o not wipe the product with organic solvents such as thinners or benzine Prohibit Use a dry cloth to wipe any dirt from the product For heavy dirt apply neutral cleaning agent to a clean cloth wring out tightly and wipe off the dirt Do not connect a hub or PC to the product s POE port Prohibit Doing so may result in damage or burnout of the hub or PC Connect a POE compatible products to the POE port FCC Statement This equipment has been tested and found to comply with the limits for a class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Op eration of this equipment in a residential area is likely to cause harmful interfer ence in which case the user will be required to correct the interference at his own expense CE approved statement CE approval only applies when this product is used in conjunction with the WLE POE R7 R33 E All rights for this manual are owned by MELCO INC No part of it may be transmitted reproduced or revised without expressed permission from MELCO INC E The names of other products used in this manual are trademarks or registered trademarks Trad
10. ply e m Send data _ GND se enn For your safety be sure to follow the instructions given below Follow the instructions below to avoid harming yourself other people and property and to ensure safe use of the product For your others and property safety be sure to read understand and follow the instructions given below thoroughly before using the product This manual contains instructions concerning general operation of the computer to which the product is connected in addition to those concerning the product itself Please take note that our warranty will not cover any failures and problems of the computer any losses and failures of data or failures and problems of the product caused by misuse E Signs and symbols used in this manual Warning signs The instructions with this sign indicate prohibited actions Failure to follow the instructions shown with this sign may result in death or serious injury to the user Failure to follow the instructions shown with this sign may result in injury to the user or property damage Symbols This indicates warnings and cautions Ex JXExercise care to avoid an electric shock This indicates prohibiting actions Ex Q Do not disassemble This indicates what must be done Ex amp Disconnect the plug from the outlet ee A WARNING E Always follow the warnings and precautions indicated by the manufacturers of the PC
11. provided in the package with the product Connection Precautions Connect the AC adapter last Always connect a POE compatible AirStation or Broadstation or Receiver Adapter WLE POE R7 or WLE POE R33 to the POE port Do not connect a hub or PC to the POE port e Doing so may result in damage or burnout of the hub or PC Always connect a POE compatible AirStation or BroadStation or Receiver Adapter Always use Cat 5 network cable or higher all Melco ETP series cables can be used to connect this product with a POE compatible AirStation or BroadStation or Receiver Adapter Using a different cable may prevent the supply of power The WLE2 POE S Power Supply Adapter does not have a repeater function The total cable length from other device connected to the LAN port to the AirStation or BroadStation is 100 m max Use LAN cable that is compatible with the products to which it will be connected Use commercially available cables Using cables prepared by the user may result in the network configuration not functioning properly Always use Cat 5 network cable or higher all Melco ETP series cables can be used when configur ing a network of 100 Mbps Supplying Power to a POE compatible Products Use the following procedure to supply power to a POE compatible products Do not connect a hub or PC to the POE port Doing so may result in damage or burnout of the hub or PC Connect a POE compatible Prohib
Download Pdf Manuals
Related Search
WLE2 POE S wle2-poe-s