Humax F2 FoxT (box manual)
Contents
1. Digital Terrestrial Receiver 2 User s Manual HUM A Notice Copvright Copvright 2001 HUMAX Corporation Not to be copied used or translated in part or whole without HUMAX s prior consent in writing except approval of ownership of copyright and copyright law Warranty The information in this document is subject to change without notice HUMAX does not have any responsibility for direct indirect accidental necessary and other corruptions due to your offer or use of the information contained in this manual Trademarks VIACCESS is a trademark of France Telecom CryptoWorks TM is a trademark of Philips Electronics N V Irdeto is a trademark of Mindport BV Nagravision is a registered trademark of KUDELSKI S A Conax is a trademark of Telenor Conax AS Dolbv and the double D symbol are trademarks of Dolby Laboratories Manufactured under license from Dolby Laboratories Thank you for purchasing a HUMAX digital terrestrial receiver Please read this user manual carefully to be able to safely install use and maintain the receiver at maximum performance Keep this user manual next to your receiver for future reference GB 1 Notice Read this manual carefullv and make sure vou understand the provided instructions For vour safetv know what the reaction upon each action will be Warnings Cautions and Notes Throughout the whole manual pav special attention to the following marks that in2. Also you can add a channel to multiple Favourite groups 1 Press the OPT Gr button 2 Select Favourite using the a w button and press the or OK 69 button Select favourite group using the a w button and press the OK lt button to register for Favourite Group urite 4 Press the OK button again on the selected Favourite Group to release the registered channel 5 Move to the parent menu using the 4 button to save the changes automatically Note For detailed information about how to change Favourite Group s name and how to register Favourite Channel for the whole channels refer to Chapter 5 GB 20 2 Lock Unlock a Channel Vou can lock or unlock the current channel while watching a programme 1 Press the Gr button 2 Select Lock using the w button and press the y or OK button 3 Select Lock option using the a w button and press the OK button 4 Select Unlock option using the w button and press the OK 09 button 5 You will be prompted to enter your Password Enter your password to unlock the channel 6 Move to the parent menu using the 4 button to save the changes automatically Note When switching to the Locked Channel you must enter the password to watch a programme 3 Delete a Channel You can delete the current channel while watching a programme 1 Press the Gm button 2 Select Delete using the A w button a
3. Moves the TV Radio channel up down 4 STANDBY LED Red light is displayed when the product is in the Standby mode Green light is displayed when the product is in operation 5 TV LED Green light is displayed when the receiver is in TV mode 6 RADIO LED Amber light is displayed when the receiver is in Radio mode GB 8 1 3 Rear Panel AUDIO VIDEO Max power consumption 11W El Power supply 90 250 50 60Hz 1 ANTENNA IN Connects a aerial to a ANTENNA input jack on the your receiver 2 TV VCR Connects a RF signal from your receiver to RF ANT input jack on your TV or VCR 3 TV SCART Connects a TV SCART cable 4 VCR SCART Connects a VCR SCART cable 5 AUDIO L R Connects to your TV or VCR and output Audio signals 6 VIDEO Connects to your TV or VCR and output Video signals 7 RS 232C Connects to your PC to upgrade product s software programme 8 S PDIF Outputs the digital audio signals S PDIF GB 9 1 4 Remote Control 1 DTV 2 TV 3 NUMERICAL BUTTONS 4 LIST 5 BACK 6 ARROW BUTTONS GB10 7 COLOR BUTTONS R G V B 8 CH CH PAGE PAGE 9 MENU 10 TEXT 11 SOUNDTRACK 12 OPTION 13 14 15 16 17 TV RADIO STANDBV GUIDE EXIT OK 18 V V 19 MUTE 20 INFORMATION 21 SUBTITLE 22 AUX 1 DTV Controls the Receiver 2 TV Controls the TV 3 NUMERICAL BUTTONS Enters a TV Radio channel number or menu option
4. 127 098 007 020 021 070 130 051 002 021 025 006 009 019 023 025 026 029 036 051 052 057 135 025 098 004 017 057 063 099 098 064 093 098 118 135 062 064 110 124 068 GB 61 12 Manipulating vour TV using Remote Control Brand THORN TMK TOKAI TOMASHI TOSHIBA TOSONIC TOTEVISION TOWADA TRIUMPH UHER UHER ULTRA ULTRAVOX UNIVERSAL UNIVERSAL UNIVERSUM VECTRO RESEARCH VESTEL VICTRO VIDEOTECHNIC Code 018 028 040 087 107 108 110 112 128 129 025 049 050 124 075 017 026 038 040 069 106 108 056 019 099 127 049 069 089 098 127 081 124 127 011 013 018 071 015 018 012 013 Brand VIDEOTON VIDIKRON VIDTECH VISA VISION VOXSON VTQ WALTHAM WARDS WATSON WATT RADIO WEGA WHITE WESTINGHOUSE WORLD TECH YAMAHA YOKO YORK ZANUSSI ZENITH ZONDA Code 094 023 009 017 050 004 005 017 018 042 068 098 042 099 126 063 094 099 006 009 010 011 013 014 015 023 025 034 040 043 050 051 058 018 098 097 127 017 018 062 098 106 133 009 015 018 063 071 133 108 076 099 006 007 029 002 GB 62 13 Preferences Edit Channels Installation n O Oc N B N Parental Control Language Setting Time Setting Schedule AN Control UHF Tuning Miscellaneous Settings Edit Channel Lists Edit Favourite Channels Channel Change Mod
5. BECRESE BELCOR BELL 8 HOWELL BEON BINATONE BLACKSTRIPE Code 062 063 002 064 071 098 081 018 071 002 029 052 084 026 068 076 097 086 004 064 018 087 097 099 102 108 052 050 099 110 124 040 099 108 109 110 009 006 038 106 018 063 040 GB 54 BLACKSTRIPE BLACKSTRIPE BLAUPUNKT BLUE SKV BLUE STAR BOOTS BOSCH BAUER BPL BRADFORD BRINKMANN BRITANNIA BROCKWOOD BROKSONIC BROTHER BRUNS BSR BTC BUSH CANDLE CAPEHART CAPSONIC CARNIVALE CARREFOUR CARVER CASCADE CATHAY CCE CCI CENTURION CGE Code 106 108 059 060 061 064 075 063 098 075 052 123 062 009 002 067 085 071 126 093 118 064 004 017 018 064 075 093 099 117 015 025 057 124 071 015 017 023 046 004 018 063 018 078 115 018 101 123 Brand CIE CIMLINE CINERAL CITIZEN CLAIRTONE CLARIVOX CLARIVOX CLATRONIC CLATRONIC CME CONCERTO CONDOR CONIC CONTEC CONTINETAL EDISON CRAIG CRIPTOVISION CROSLEY CROSLEY CROWN CTC CURTIS MATHES CXC CYBERTON DAEWOO Code 133 004 117 029 084 015 019 025 026 029 040 057 074 056 018 125 098 127 004 005 017 018 028 042 049 063 065 066 068 076 079 087 025 098 110 004 017 052 056 062 141 052 105 023 110 004 018 019 052 127 098 006 015 019 020 021 023 026 030 035 038 25 040 044 084 106 052 064 004 009 018 019 029 084 133 55 12 Manipul
6. Channels You can lock or unlock one or more channels 1 Move the cursor to the channel list using the 4 button 4 Edit Channel List 2 Select your desired channel and then press the OK button to lock unlock the channel s You can select multiple channels 3 Select Lock in the right using the jp button and press the OK 9 button Note Onlyif locked channel s is selected or all channels are locked Lock is switched into Unlock When you press Unlock locked channel is switched into unlocked channel am Enter password using the NUMERICAL 0 9 button to TEC watch locked channel 4 Select Unselect All Channels Vou can select unselect all channels at a time 1 Select Select All in the right and press the button to select all channels 2 Select Unselect All in the right and press the OK button to unselect all the selected channels OFF GB 25 5 Channel List 5 4 Edit Favourite Channels Vou can edit Favourite channel or Favourite channel list 1 Press the MENU button 2 Select Edit Channels using the a w button and press the OK button 3 Select Edit Favourite Channels using the a w button and press the OK or jp button Edit Favourite Channels ow Note Press the BACK 6 amp 3 or 4 button to save the changes and return to the previous menu Press the MENU 4 or EXIT button to exit the Menu screen You can easily nav
7. button Select Edit Channel lists using the a w button and press the OK or jp button 4 You will be prompted to enter your password Enter your password using NUMERICAL 0 9 button 4 Edit Chann Note Press the BACK or 4 button to save the changes and return to the previous menu press the MENU 2 or EXIT button to exit the menu screen Youcan easily navigate all menus using the assigned IC NEN numeric for each menu Press the MENU 2 order at remote control to select Edit Channel Lists menu 4 Edit Channels 1 Select a Channel Group You can select the channel list group to edit TV and Radio sub groups be selected 1 Press the OK or jp button in group to display Channel List Group 4 Edit Channel List 2 Select your desired Channel List Group using the A w button and press the OK button Note Press the TV RADIO c button to move to TV or RADIO channel list directly Forediting Favourite channel list move to MENU Edit Channels Edit Favourite Channels menu GB 24 2 Delete Channels Vou can delete one or more channels 1 Move the cursor to the channel list using the 4 jp button 4 Edit Channel List 2 Select your desired channel and then press the OK button to delete the channel s can select multiple channels LD 3 Select Delete in the right using the jp button and press eae the OK button 3 Lock Unlock
8. number 4 LIST Displavs the channel list 5 BACK Returns to the previous menu and screen 6 ARROW BUTTONS Changes the channel or move the cursor to the up down left or right menu option 7 COLOR BUTTONS R G V B Select color kevs for interactive applications 8 CH CH PAGE PAGE Changes the Channel or Page 9 MENU Displays the main menu 10 TEXT Displays digital text 11 SOUNDTRACK Displays the Soundtrack 12 0PT OPTION Displays the channel attributes during watching a programme 13 TV RADIO Switches between TV and Radio modes 14 STANDBY Switches between Operation and Standby modes 15 GUIDE Displays the Programme Guide 16 EXIT Exits the main menu or Guide screen 17 0K Selects a menu or confirm the selected operation And display the channel list during watching a programme 18 V V Adjusts the audio volume 19 MUTE Pauses the audio temporarily That is volume on off temporarily 20 1 INFORMATION Displays the information about the channel and programme 21 SUBTITLE Changes the subtitle language 22 AUX Controls input mode of TV Note This remote control can also control your TV To set the remote control for your TV please refer to Chapter 12 GB 11 This chapter describes how to set up the receiver Select the most appropriate procedure depending case Note encounter problem when setting up the rece
9. 02 124 007 020 023 038 040 050 106 004 018 042 063 097 127 127 106 010 012 014 015 017 023 051 057 058 110 006 071 063 071 098 117 015 018 023 089 018 004 005 018 049 063 092 097 117 021 070 110 GB 58 Brand MEDIATOR MEGATRON MEI MEMOREX MEMPHIS MGA MIDLAND MINERVA MINUTZ MITSUBISHI MIVAR MOTOROLA MTC MULTISTANDARD MULTITECH MUTIMEDIA NAD NAONIS NATIONAL NEC NECKERMANN NESCO NETSAT NIKKAI NIKKO NISATO NOBLEX Code 018 002 035 050 109 056 004 006 025 026 033 036 038 050 070 071 106 124 009 015 036 039 050 007 016 019 020 021 034 068 011 009 017 030 036 039 050 068 062 024 030 009 015 025 026 056 062 127 004 052 062 063 099 127 132 040 044 050 099 068 009 015 017 025 046 018 059 087 089 099 102 018 051 018 016 018 028 040 062 064 071124 007 015 020 029 038 040 050 081 083 NOKIA NOSHI ONWA OPTIMUS OPTIONICA ORION OSAKI OSAKI OSAKI OSAKI OSAKI OSAKI OSO OSUME OTTO VERSAND PALLADIUM PANAMA PANASONIC PATHE CINEMA PAUSA Code 071 094 095 096 099 106 108 143 008 029 042 099 106 118 052 038 044 070 030 043 018 049 051 067 085 097 098 118 016 028 063 064 071 124 064 016 028 124 017 018 059 063 087 089 093 097 098 099 102 108 117 118 099 063 071 000 020 021 022 023 024 026 030 035 036 038 040 042 043 050
10. 065 068 070 079 099 062 098 004 PHASE PHILCO PHILIPS PHONOLA PILOT PIONEER POLICOM POLVRON PORTLAND PRANONI PRINCE PRIMA PRINZ PRISM PROFEX PROLINE PROSCAN PULSAR QUASAR Code 040 106 108 001 102 008 009 011 013 015 016 019 020 021 025 026 034 040 050 016 009 010 012 014 015 023 035 057 058 085 123 007 008 009 010 011 012 013 014 018 019 023 089 110 124 138 018 098 009 015 019 042 044 068 071 009 019 029 099 040 106 124 021 004 119 015 020 099 127 004 018 063 071 002 050 007 009 110 124 021 024 043 070 GB 59 12 Manipulating vour using Remote Control Brand QUELLE QUESTA RADIO SHACK RADIOLA RADIOTONE RADIX RANK ARENA RCA REALISTIC REKORD REVOX REX RFT RHAPSODV R LINE ROADSTAR ROVAL LUX RTF RUNCO SABA SAGEM SAISHO SAKIO SALORA SAMBERS SAMPO Code 005 018 087 093 097 099 108 117 118 017 009 015 016 019 020 025 038 043 050 052 106 018 071 108 017 008 009 020 021 030 034 009 015 016 019 025 038 043 050 052 106 149 018 042 071 076 099 088 126 055 056 062 018 004 064 071 131 018 007 015 042 095 099 139 004 005 049 071 117 071 042 094 099 102 106 124 127 015 016 019 Brand SAMSUNG SAMSUX SANDRA SANSEI SANSUI SANVO SBR SCHAUB LORENZ SCHNEIDER SCIMITSU 5 SC
11. 9 using the w button and press the OK lt button Note If 2 options are provided you can switch the option at a time using the OK button Namely Whenever you press the OK button Screen Ratio is switched between 4 3 and 16 9 4 Display Format You can select the Display Format according to TV Screen Ratio 1 Select Display Format w button and press the OK or y button 2 If the Screen Ratio is set to 4 3 you can select one from 16 9 Letterbox 14 9 Letterbox Centre Cutout using the w button and press the OK button 3 If the screen ratio is set to 16 9 this item will display Disable or Auto GB 41 7 Setting Preferences 7 6 UHF Tuning Vou can set the UHF channel 1 Press the MENU button 4 UHF Tunin 2 Select Preferences using the w button and press EJ aa the OK or jp button Select UHF Tuning using the a w button and press the OK 9 or jp button 1 UHF Channel You can select UHF Channels for the TV The Channel range and Frequency change according to PAL Standard 1 Select Channel using the w button and press the OK button 2 Select channel range based on the following channel criteria using the a w button and press the OK button CH21 CH69 PAL I G for Europe CH28 CH69 PAL B for Europe Australia 2 PAL You can select the channel range and frequency table 1 Select PAL using
12. B 6 7 Setting Preferences 7 1 Parental Control 7 2 Language Setting 7 3 Time Setting 7 4 Schedule 7 5 A V Control 7 6 UHF Tuning 7 7 Miscellaneous Settings 8 Installation 8 1 Automatic Search 8 2 Manual Search 8 3 Default Setting 9 Software Update 10 11 12 13 14 15 16 17 9 1 Over the Air 9 2 S W Update from PC System Information 10 1 Status 10 2 Signal Detection GAMES Manipulating your TV using Remote Control Menu Map Trouble Shooting 14 1 Trouble Shooting 14 2 Error Message Specification Glossary Service and Support GB35 GB35 GB37 GB38 GB40 GB40 GB42 GB43 GB44 GB44 GB45 GB47 GB48 GB48 GB51 GB52 GB52 GB52 GB53 GB54 GB63 GB64 GB64 GB65 GB66 GB68 GB69 1 Before Using the Receiver This chapter describes detail instructions on the product and its accessories 1 1 Package Contents Please check all package contents before using vour receiver 090000 0000 User s Manual 1 Batteries 2 Scart Cable 1 Note Since faults may occur if the remote control is being left without a battery for a long time always keep the battery inserted in the remote control GB 7 1 Before Using the Receiver 1 2 Front Panel 1 STANDBY Button Switches between Operation and Standbv modes 2 TV RADIO Button Switches between TV and Radio 3 CH CH
13. CH List 1 Select the Option in CH List using the w button and press the or y button 2 Select one option from On Off using the a w button and press the OK button On Scramble icon display in the channel list Off Scramble icon disappear in the channel list GB 43 8 Installation This chapter describes how to search for channels and a series of procedures 8 1 Automatic Search If your receiver is connected to the aerial and television you can automatically search channels without entering anv other information 1 Select MENU button 4 Installation Dum 2 Select Installation using the w button and press the emer m OK or button e l 3 Select Automatic Search from Installation menu using the A w button and press the OK or y button 4 Receiver starts to search channels automaticallv Search Wait while the receiver searches for the channels this mav take a few minutes 1 During operating search the cursor is located at Stop Therefore if you press the OK button during ETE searching the operation is stopped and the channels found until then will be displayed 2 If search operation is successfully completed and the channel does not exist press the OK button and try to reset the search operation again if necessary 3 You can delete unnecessary channels from the searched channels Select your desired channels to delete and Lemken press the OK butt
14. DBY 5 button to make this product operating HHH e TV SCART RU power consumpfon TIW BI VCR SCART Power supply 90 250V 50 60Hz GB 51 10 Svstem Information Vou can view all svstem information signal strength and qualitv 1 Press the MENU button 2 Select System using the w button and press the OK button 10 1 Status Vou can view Svstem information 1 Select Status using the w button and press the OK button 2 Confirm the information about Hardware version Software version Loader version Update Date and Svstem ID 10 2 Signal Detection 4 Status You can view the signal strength and signal quality receiving for the channel that is currently on AV 1 Select Signal Detection using the w button and press the OK or jp button 2 Displays the channel name frequency mode and guard interval of terrestrial frequency and currently tuned channel number and its name which current channel belongs to and the graphs and percentage of Signal Strength and Quality of the channel GB 52 4 Signal Detection H21 474000kHz Auto Auto 1YLETVI This product provides various games for user s entertainment 1 Press the MENU button 2 Select Games using the a w button and press the or jp button According to the instruction displayed on screen you ca
15. ON HYPSON HYPSON ICE ICES IMPERIAL INDESIT INDIANA Code 018 028 063 109 124 075 018 059 060 068 137 051 052 071 050 018 089 097 098 099 118 119 051 023 052 004 071 075 097 004 017 018 051 064 094 095 096 099 102 108 109 110 111 112 113 114 124 148 016 017 025 031 032 035 037 042 048 063 066 090 091 062 123 134 018 071 075 071 075 063 071 064 092 099 101 123 068 018 Brand INFINITY INGEKEN INGELEN INNOHIT INNOVA INTEQ INTERBUY INTERFUNK INTERVISION ISUKAI ITT JACSON JBL JCB JEC JVC KAISUI KAMP KAPSCH KATHREIN KAWASHO KEC KENDO KENWOOD KINGSLEY KLH KLOSS KMC KONIG Code 023 139 042 028 124 018 007 071 018 042 095 099 018 063 071 127 144 064 042 099 108 129 023 137 040 017 022 045 054 004 062 063 064 075 062 042 095 099 089 062 077 052 018 099 117 119 127 009 015 062 124 012 033 004 005 017 018 042 061 068 GB 57 12 Manipulating vour using Remote Control Brand KORPEL KORTING KOVODA KTV KUBA ELECTRONIC LENCO LG LIESENK 8 TTER LIFETEC LLOVTRON LOGIK LUMA LUXMAN LUXOR LXI M ELECTRONIC MAGNAFON MAGNASONIC MAGNAVOX MAJESTIC MANDOR MANESTH MARANTZ MARK MATSUI MATSUSHITA MC MICHAEL Code 018 098 004 015 019 052 055 056 063 074 097 071 133 146 018 028 071 118 124 025 018 071 016 000 006 099 025 068 094 099 1
16. OTT SEARS SEG SEI SEI SINUDYNE SELECO SEMIVOX SEMP SENTRA SHARP SHOGUN SHORAI Code 004 009 015 016 018 019 025 026 050 063 071 078 089 124 137 019 062 084 085 005 017 028 038 041 106 107 108 124 129 018 099 018 064 071 097 136 143 147 009 050 009 050 051 052 067 020 023 025 038 040 041 047 050 051 106 017 063 071 126 127 049 097 099 117 118 127 042 076 099 100 119 120 122 052 040 040 017 019 030 043 009 118 GB 60 SIAREM SICATEL SIEMENS SIGNATURE SILVER SIMPSON SINGER SINUDVNE SKANTIC 5 SOGERA SOLAVOX SOLAVOX SONITRON SONOKO SONOLOR SONTEC SONY SOUND amp VISION SOUNDESIGN SOUNDWAVE SPECTRA SPECTRICON SQUAREVIEW SR2000 555 STANDARD STARLITE STERN SUNKAI SUPERTECH Code 127 121 018 059 060 061 006 040 017 057 058 127 049 099 018 098 016 042 108 004 018 071 042 018 005 017 073 087 127 050 051 052 057 018 133 002 047 106 009 052 004 063 064 098 052 042 076 099 117 118 097 Brand SUPRA SUSUMU SYMPHONIC SYSLINE TADNDY TANDY TASHIKO TASHKO TATUNG TEC TECHLINE TECHNEMA TECHNICS TECHNISAT TECHNOL ACE TECHWOOD TEKNIKA TELECO TELEFUNKEN TELEMEISTER TELETECH TELETON TELEVIDEON TENSA TESLA TEXET THOMAS THOMAS THOMSON Code 025 064 010 012 014 015 023 057 058 080 047 018 124 028 030 042 063 064 110 017 063 002 018 024 028 063 124 063 133
17. Press the GUIDE Ge button 2 Press the Green button to display Time Bar PO Select the Time Bar button using the button and EE ee press the OK button to move as your desired amount ku of time If you press the button repeatedly the same gt operation is repeated Sme 17 Dream Build Ej TVS Americ 4 Each button functions as follows Now Moves to the current programme where the cursor is located lt Moves to the previous programme or 30 minutes before gt Moves to the next programme or 30 minutes after Moves to 2 hours before Moves to 2 hours after qDay Moves to one day before Moves to one dav after 5 Select button and press the OK button to exit the Time Bar Note Guide provides programme information from the previous dav to the next 7 davs 3 Reserving Reserving a Watching Vou can automaticallv reserve vour desired programme bv selecting the scheduled programme and pressing the OK button 1 Select the desired programme and press the OK button The following message will be displayed ze 59 Premiere Movie 2 Select Yes and press the button to reserve the programme When a reservation has been completed the icon is displayed on the reserved programme Goron 5 RAL Select No and press the OK button not to reserve a the programme 4 If the channel is locked parental controlled or restr
18. are Among the Software Update Sites of HUMAX the software search operation is the satellites that have been set to Enable in Installation Antenna Setting menu and that have all other Antenna Setting correct 1 Select Manual Update from Software Update screen using the a w button and press the OK button Select the channel number which provides update software Vou can also enter the frequencv instead of channel number in which updated software is provided 2 Select Mode If the information is not known then Auto can be selected 3 Select Guard Interval lf the information is not known then Auto can be selected Note How to setting parameters in Manual Update is the same as how to set parameters in Manual Search Refer to Manual Search 4 Select Search and Press the OK button to search software 5 It is displayed whether or not New Software exist If new software does not exist press the OK Gr button to return to the Manual Update Menu 6 Select Yes and press the OK button to start updating Select and press the OK button to return to the previous menu Select Later and press the OK button to update later That means the update menu display as soon as you turn on the receiver next time 7 Performs Software Update Please wait until it is completed 8 When completing the software update the product is automatically powered off and on again GB 50 4 Automatic Upd
19. ate Software Update Current Version NVA 1 03 01 New Version NVA 1 08 02 New system software ie available Do you want to update it Later No update correctly performed only for Satellite Alternative 0000 4 Manual Update 2 Frequency Mode Guard interval Strength 100 Quality 100 Update NVA 1 0301 NVA 1 03 02 6 Software Auto Detecting and Time Vou can specifv the software detecting time If the receiver powers on during software auto detecting Detecting will stop 1 2 3 Select Software Auto Detecting from Software Update screen using the w button Select Enable or Disable using OK or jp button whether or not setting the software detecting time automatically When you select Enable you can set the detecting time in the Auto Detecting Time 9 2 S W Update from PC You can connect your receiver to the PC directly and update your software by transferring the new software from the PC Follow these steps to download new software from PC to this product 1 a Pon Download new software file HDF files equivalent for this product model from our website into your computer http www humaxdigital com Download and install download tool file from our website into your computer Connect your PC to this product with RS 232C serial cable Execute installed download tool and then follow the instructions contained the download tool Press the STAN
20. ating vour using Remote Control Brand DAINICHI DANSA DAYTON DE GRAAF DECCA DENON DESMET DIXI DUAL DUAL TEC DUMINT DUMONT DYNATECH EB TELECOM ECTEC ELBE ELECTROBAND ELECTROHOME ELEKTA ELIN ELITE ELMAN ELTA EMERSON ENVISION ERRES EURO FEEL EUROMANN Code 064 018 004 009 019 108 066 018 028 129 035 098 003 004 018 126 097 063 127 007 009 063 105 081 116 056 080 106 110 071 018 040 064 098 106 127 004 009 019 038 049 050 051 051 053 054 055 056 067 072 074 075 085 015 018 071 071 GB 56 Brand EUROPHON FERGUSON FIDELITY FINLADIA FINLUX FIRST LINE FISHER FORMENTI FRONTECH FUJITSU FUNAI FUTURETECH GALAXIS GBC GE EC GELOSO GENEXXA GIBRALTER GO VIDEO GOLDSTAR GOODMANS GPM GRADIENTE GRADIN GRAETZ Code 127 018 062 097 104 106 018 028 051 093 129 118 004 062 063 038 041 063 097 106 108 126 018 098 103 042 071 099 028 051 124 047 051 052 071 118 052 123 142 099 011 013 020 021 024 030 034 050 075 084 018 028 063 095 110 129 004 099 042 064 007 009 015 026 000 001 009 015 016 018 019 025 033 050 063 071 093 110 124 140 017 018 028 051 063 133 064 022 025 046 082 098 042 099 GRANADA GRANDIN GRUNDIG GRUNPV GRUNPV HALIEAX HALLMARK HANSEATIC HARLV DAVIDSON HARMAN KARDON HARVARD HCM HEMMERMANN HINARI HITACHI HUANVU HUSPI ELEKTRONIK HVPERVISI
21. button 3 If new version of software is detected during watching a programme 1 A message will be displaved to notifv that new software is found 2 Select Yes and press the OK button to start upgrading Select No and press the OK button to return to the previous menu Select Later and press the OK button to update later That means the update menu displav as soon as vou turn on the receiver next time 4 If using Automatic Update Vou can set the product to find HUMAX software update site and update software automaticallv 1 Select Automatic from Software Update Menu screen using the a w button and press the OK or ju button Enable 04 00 2 Automatically search for new software Select Stop and press the OK button to finish Search Automatic Update 3 When detecting update software the following result is displayed If new software is not found by Automatic use Manual Update 9 Software Update 4 Select Yes and press the OK button to start updating Select No and press the OK button to return to the previous menu without updating Select Later and press the OK button to update later That means the update menu displav as soon as turn on the receiver next time A 5 When completing the software update the product is a automaticallv powered off and on again 5 Manual Update Vou can perform Manual Update if vou know MUX information of softw
22. cted Enable set the Start and End Time using the NUMERICAL 0 9 buttons and press the OK button 4 If you wish to cancel the entered time select the Cancel button and press the OK button Note Once the setting has been completed you can watch programme only while the time specified by Allow Time Or you should enter the Password to watch any programme during unspecified time GB 36 3 Change Password You can change the existing Password into new 1 Select Change Password using the A w button and press the jp or OK button 2 Enter New Password using the NUMERICAL 0 9 button and press OK button 3 Enter the New Password again to confirm the Verifv Password and press the OK button View All Disable Note The Default Password is 0000 If you have forgotten your Password please contact your local product distributor 7 2 Language Setting You can set Language for Menu Audio and Subtitle 1 Press the MENU button 2 Selec Preferences using the A w button and press the OK 9 or jp button Select Language Setting using the w button and press the or jp button etting 1 Audio Subtitle Language Vou can set the language for Audio and Subtitle Default language is English 1 Select Audio Subtitle Language using the a w button 2 Press the y or button to display the available Language List 3 Select your desir
23. dicate hazardous situations Warning Indicates a hazardous situation which if not avoided could result in serious injury Caution Indicates a situation which if not avoided could damage the equipment or other apparatus Note Indicates additional information to the user to make the user aware of possible problems and information of any importance to help the user to understand to use and to maintain the installation A A To reduce the risk of electric shock do not remove cover or back No user serviceable parts inside Refer servicing to qualified service RISK rson nel 7 This svmbol indicates dangerous voltage inside the product that A presents a risk of electric shock or personal injury This symbol indicates important instructions accompanying the product GB 2 Safetv and Warning This digital terrestrial receiver has been manufactured to satisfv international safetv standards Please read the following safety precautions carefully Safety Instructions and Precautions 1 MAINS SUPPLY 90 250V AC 50 60Hz Operate your product only from the type of power source indicated on the marking label If you are not sure of the type of power supplied to your home consult local power company Disconnect the receiver from the mains before you start any maintenance or installation procedure OVERLOADING Do not overload a wall outlet extension cord or adapter as this may result in electric fi
24. displaved to request vour password enter the password using the NUMERICAL 0 9 button 2 Time Setting Schedule 1 Setting Censorship Censorship Classification allows you to block programmes according to the age level you have set 1 Select the Censorship Classification using the a w button and press the OK lt or jp button a 72272 2 Select your desired age level using the a w button and press the OK button GB 35 7 Setting Preferences View All programmes can be watched because there is no age limitation 7 Programmes are blocked for children under the age of 7 12 Programmes are blocked for children under the age of 12 15 Programmes are blocked for children under the age of 15 18 Programmes are blocked for children under the age of 18 Lock Programmes are blocked without considering the age level Note You have to enter Password to watch the programme which is blocked by the age level 2 Setting Allow Watch Time You can block programmes according to the watching time for all the channels 1 Select the Allow Time Control using the a w button and press the y or OK button m 2 Select Enable or Disable the Allow Time Control using the A w button and press the y or OK button Disable You can watch whenever you want regardless of Allow Time Enable You can watch only while the time specified by Allow Time 4 Parental Control 3 When you have sele
25. e Automatic Search Manual Search Software Update Default Setting Status Signal Detection GB 63 14 Trouble Shooting 14 1 Trouble Shooting Before contacting your local service please make sure following instructions If the product does not work normally after completing the following trouble shooting please contact your local product distributor or service center 1 No message is displayed on the front panel or product has no power Check the main power cable and check that it is plugged into a suitable power outlet Check whether Power Switch is On No picture Make sure that the product is in Operation Mode Make sure that the AV Cable is firmly connected to the TV Make sure that aerial line is correctly connected to the equipment Check the brightness level of TV Check the channel is on air Poor picture amp sound quality Install aerial where there is not obstacle ahead Make sure to avoid putting mobile phone or mircrowave oven near around the equipment Use 75 coaxial cable to connecting TV and aerial No or poor sound Check the volume level of the TV Check the Mute status of the TV and product Press the Audio button to change the Sound Track type Remote control does not operate To manipulate the equipment with remote control the remote control s emitting part should directly point towards the receiving part of receiver s remote control Check the batt
26. earch If you want to stop the Channel Search select the OK 9 button installation Wizard If the Channel Search is stopped or finished the result of Channel Search is automatically saved When completing Channel Search you can enjoy programmes Warning Press the EXIT button to save the previous input information and exit the installation wizard when running the installation wizard If you exit the install wizard without fully completing the setting procedures you may not watch any broadcasting normally In this case you can use the Installation Menu to configure your receiver as you like GB 15 4 Basic Operation This chapter describes functions such as switching channel volume control and basic features for watching programmes 4 1 Switching Channel You can switch the current channel using one of the following methods 1 Press the CH CH4 69 69 button 2 Enter vour desired channel numeric using the NUMERICAL 0 9 buttons to move to the channel directiv 3 Press the TV RADIO Gc button to switch between TV channel and Radio channel Note You can switch channel using Programme Guide or Channel List Please refer to Chapter 5 and 6 for more information 4 2 Volume Control 1 Press the V V buttons to adjust the audio volume of your TV 2 Press the MUTE button to stop the sound of your TV temporarily 4 3 Text and interactive services If your chosen channel has teletext MHEG feat
27. ed language using the a w button and press the OK button GB 37 7 Setting Preferences 2 Subtitle Displav You can select whether or not to display the Subtitle if provided 1 Select Subtitle Display using the a w button 2 Presse the y or OK button to display the Auto or Manual option 3 Select your desired option and press the OK button Auto Subtitles are displayed automatically in the predefined subtitle language Manual Subtitles are displayed in the language when you select the subtitle language by pressing the Subtitle E button at remote control 3 Subtitle Font You can select the Subtitle font 1 Select Subtitle Font using the w button 2 Press the y or OK button to display the Variable or Fixed option 3 Select your desired option and press the OK button Variable Uses the horizontally variable Subtitle Font Fixed Uses the fixed Subtitle Font 7 3 Time Setting You can specify the current time and Power On Off time 1 Press the MENU c button 4 Time Setting 2 Select Preferences using the w button and press Power ON the OK or jp button 4 Power OFF 3 Select Time Setting using the a w button and press the OK or jp button GB 38 1 Setting Current Time You can set the GMT Offset for current time 1 Select GMT Offset using the A w button 2 Press the y or OK button to display GMT list GMT is changed by from 30 mi
28. ending on the provided programme information GB 32 6 3 Viewing Reserved Programme You add or edit reserved programmes by viewing the reserved programme list 1 Press the GUIDE button 2 Press the Vellow button to displav the Schedule screen 13 Ri The Select the scheduled programme and press the OK button to edit the reservation information 18 FOX KIDS Show Show Show 74 GOLDSTAR TV 4 Select vacant list and press the OK 6 button to add a new reservation schedule gu Scheu MIETET 18 FOX KIDS 14 00 Show Show Show 2 76 GOLDSTAR TV 1 Editing a Reserved Programme 1 Change the reserved Start Time using the 4 jp button and the NUMERICAL 0 9 buttons 2 Change the reserved End Time using the 4 jp button and the NUMERICAL 0 9 buttons 3 Change the Repeat mode using the 4 button The options Dailv Weekiv 4 Select the Delete button and press the button to delete the reserved programme 5 Select the Cancel button and press the OK button to cancel the editing 6 Select the Save button and press the OK button to complete the editing 25 10 14 30 GB 33 6 Programme Guide 2 Adding a Reservation 1 Enter vour desired channel number using the NUMERICAL 0 9 button The channel name is gu Schede 1 2 automaticallv displaved channel number 2 Enter your desired Start Time u
29. er cord in order to prevent the cover vinyl from melting Follow these directions Failure to follow one of them may cause electrical shock Do not open the main body Do not insert metals or inflammable objects inside the product Do not touch the power plug with a wet hand Disconnect the power cord in case of lightening Do not use the product when it is out of order If you continue to use the product when defective serious damage can be caused toit Make sure to contact your local product distributor if the product is out of order GB 4 Contents 1 Before Using the Receiver GB7 1 1 Package Contents GB7 1 2 Front Panel GB8 1 3 Rear Panel GB9 1 4 Remote Control GB10 2 Setup GB12 2 1 Connecting Aerial GB12 2 2 Powering On GB14 3 Installation Wizard GB15 4 Basic Operation GB16 4 1 Switching Channel GB16 4 2 Volume Control GB16 4 3 Text and interactive services GB16 4 4 Change the Subtitle Language GB17 4 5 Change a Audio Language GB17 4 6 Programme Information l plate GB18 4 7 Option List GB20 5 Channel List GB22 5 1 Displaying and Switching Channel List GB22 2 Changi h 5 2 Changing Channel List Group GB23 3 Edit Ch 5 3 Edit C GB24 4 Edit ite Ch 5 4 Edit Favourite Channels GB26 5 Ch Ch M 5 5 Channel Change Mode GB29 6 Programme Guide GB30 6 1 Viewing Programme Guide Information GB30 6 2 Finding a Programme GB32 3 Viewing R P 6 3 Viewing Reserved Programme GB33 GB 5 Contents G
30. ery of Remote control Reservation is unavailable Check whether it it not overlapped with other reservation Check whether the power switch is off GB 64 14 2 Message Error message No or bad signal Possible causes The aerial is not pointing What to do Adjust aerial Check the cable from the aerial lf you cannot resolve the problem you may need to have your aerial and installation tested by a professional The channel is scrambled or not available The channel has signal but no audio or video The channel is not deleted by broadcasting company The channel is for data broadcasting Confirm if the channel is currently on alr Cannot watch the channel in usual way The channel is scrambled This digital terrestrial receiver does not support the service that enables to descramble the scrambled channels The audio is not available The channel has signal but no Audio Press the Audio button to confirm if the channel has Audio GB 65 15 Specification Tuner 8 Channel Input Connector IEC Tvpe IEC 169 24 Female RF Loop through Output connector IEC Tvpe IEC 169 24 male Frequency Range 48 5MHz to 226 5MHz VHF 470MHZ to 862MHz UHF Signal Level 10 to 70dBm Demodulation OFDM Mode 2K 8K FEC mode 1 2 2 3 3 4 5 6 amp 7 8 Guard Intervals MPEG Transport Stream A V Decodi
31. icted by watching time you will be prompted to enter your Password Enter your Password to complete the reservation sE GB 31 6 Programme Guide 6 2 Finding a Programme Vou can find vour desired programme bv programme name or genre easilv 1 Press the GUIDE button 2 Press the Blue button to displav Find screen 3 Enter the programme name directiv using the kevboard displaved on the screen Find Programme by Name E Keyword AR 4 When completing entering programme name select the Find button and press the button 5 If you select your desired programme from the results of finding programme screen and press the OK button aos you can watch the programme if it is on air or you can VR My reserve your programme if it is scheduled the following 6 Select By Genre and press the OK button to search programme by genre dE aa 7 Select your desired genre and press the OK button _ 8 As the result screen of Find programme by Name select A desired programme from the Results of Finding Programme screen and press the OK button to rasi E watch the programme immediately or reserve the programme Note f you press Previous or Next button on the Keyboard displayed on the screen the keyboard layout is switched 75 E Keyword Note The results of the finding programme may differ dep
32. igate all menu items using the assigned numerical button for each menu Press the MENU 2 2in order on the remote controller to select the Edit Favourite Channels menu The buttons for editing the Favourite channel list are described in the following table Adds Favourite channel Remove Removes from the Favourite channel TV RADIO Switches between TV and Radio channel list Fav Group Changes Favourite channel list group Move Moves the order of channel list within the Favourite channel list Sort Sorts channels by number or name in all TV Radio channel list g Rename Renames the name of Favourite channel list Unselect All Unselect all the selected channel GB 26 1 Add Remove favourite channels Vou can add favourite channel s to a specific Favourite channel list or remove the added favourite channel s from the list 1 Select Favourite Group using 2 Select vour desired channel s in all TV Radio channel list and press to add Favourite channel s 4 Edit Favourite Channels 3 Select your desired channel s in Favourite channel list and press to remove Favourite channel s Note You can switch between TV and Radio channel list using TV RADIO Gc button or remote control 2 Move favourite channels You can move favourite channel s to your desired location within the Favourite channel list 1 Select Favourite Group using 2 Select your desired channel to move w
33. ithin the Favourite pene channel list and press the OK button im n d Select and press the OK button 4 Move the cursor to your desired location using the a w button and press the OK button 5 The selected channel s is moved to the desired location you selected 3 Rename a favourite channel list You can rename Favourite channel list Edit Favourite Channels 1 Select Favourite group to rename using B 2 Select and press the OK button 3 Enter the Favourite channel list name using the keyboard displayed on the screen 5 Channel List 4 When finishing entering the Favourite channel list name select OK and press the button Edit Favourite Channels 4 Additional Features Additional Features provides many useful functions which are necessary to add Favourite Channel Change between TV and Radio channel list You can add not only TV channel s but also Radio channel s to Favourite channel list Press gy to switch all channel list into TV or Radio channels Note You can also change into TV or Radio channel by pressing TV RADIO c button at remote controller Select a favourite channel list You can select your desired Favourite channel list to edit Press BSI to display the Favourite channel list Then select your lt Edit Favourite Channels desired channel list using the A w button and press the OK but
34. iver please contact vour local product distributor Where possible use an outdoor roof aerial intended for receiving UHF channels between 21 and 69 It is not advisable to use indoor or window mounted aerials as digital channels will be difficult or even impossible to receive 2 1 Connecting Aerial 1 Connecting TV and VCR power corsumelin NW Power svi 90 250v 5O 6GHx Connect the cable of your TV aerial to the ANTENNA IN connector on the rear of the receiver Scart and co axial cable are connected as in the figure above GB 12 2 Connecting Hi Fi 1 Connect the outputs on this receiver to corresponding inputs your Hi Fi system left audio out to left audio in right audio out to right audio in 3 Connecting Hi Fi system 2 If you wish to connect the optical S PDIF terminal and Dolby digital decoder to listen digital audio connect as following GB 13 2 2 Powering On 1 Connect the power cord of the receiver to a wall outlet 2 Power on by pressing the STANDBY 5 button at Remote Controller The Standby LED indicator is turned on Green GB 14 3 Installation Wizard When powering on vour receiver for the first time after purchasing the Installation Wizard is automaticallv started It immediatelv performs Channel Search Vou can run the Installation Wizard in Default Setting Please wait for finishing the Channel S
35. list 2 Select your desired audio language using the a w button to change Audio immediately 3 Select Audio Direction left right stereo using the 4 button Note you can select your desired default audio language by selecting MENU Preferences Language Setting Audio Language GB 17 4 Basic Operation 4 6 Programme Information l plate Programme information is alwavs displaved for a specific period of time whenever vou switch channels You can view the programme information by pressing the i 1 button while watching a programme Press the EXIT button to hide the l plate 1 General Information General Information is displaved as follows on the screen 25 Financial News E 1 Channel number and channel name 2 Programme name 3 Icons t m 7 DO Digital TA ri GB 18 Displayed only if this programme is reserved Represents parental level It indicates the minimum level of ages that the programme is targeted at Displayed only when the channel is a locked channel Displayed only when the channel is a scrambled channel Displayed only when subtitle information is available Displayed only when there is any teletext information Displayed only when the programme is a dolby digital one Displayed when the channel supports MHEG Displayed when the channel supports data channel A Current time 5 Detail programme information displaved if detailed programme i
36. n 6 1 Viewing Programme Guide Information Vou can view programme information for all channels 1 Press the GUIDE button 2 Move to previous or next programme within the same channel using the 4 j button 3 Move to another desired channel using the A w button If there are multiple channels use PAGE PAGE 63 69 button to move to channels by page Also you can enter your desired channel number using the NUMERICAL 0 9 button on the remote controller to move to the channel directly 4 Select your desired programme and press the OK button Then you can watch the programme if it is on air or you can reserve it if it is the following programme 5 Press the i G button in the selected programme to view Extended Information for the selected channel 1 Viewing Guide Information Groups Vou can view programme information for desired channel list bv groups 1 Press the GUIDE button 2 Press the Red button to displav the channel list group 3 Select your desired channel list group using the A w button to display the appropriate sub group 4 Move the cursor to the sub group using the jp button select your desired sub group using the A w button and then press the OK button 5 The Programme Guide for selected channel list is displayed MEL GB 30 2 Viewing Programme Information Using Time Bar Vou can quickiv search for vour desired time zone using the Time bar 1
37. n enjoy the game using 4 and OK button Note Press the EXIT or BACK 63 button to exit the game GB 53 12 Manipulating vour TV using Remote Control You can manipulate TV using the remote control provided by Humax Note This function may not be supported depending on TV model TV code setting Note While you are setting TV code please keep pressing TV button 1 Point remote control towards the remote control receiving parts of TV 2 Press the TV O button and the TV button LED blinks once Keep pressing TV button for 3 seconds then TV button LED turn on Press three numbers of TV code using the NUMERICAL 0 9 button orderly Refer to the following Code for TV manufacturer 3 TV button LED blink twice when you detach your finger from the TV button 4 TV power turns on or off when the setting is completed Code for TV manufacturer Table Brand A MARK ABEX ACTION ACURA ADMIRAL ADYSON AIKO AKAI AKURA ALARON ALBA ALLORGAN AMBASSADOR AMPLIVISION AMSTRAD ANAM ANAM NATIONAL ANITECH ANITECH 5 Code 002 016 110 124 004 030 042 076 099 123 016 063 029 015 099 109 124 064 071 051 055 062 004 017 018 064 123 118 049 063 004 018 047 049 145 003 004 052 024 004 071 071 127 002 009 015 056 Brand ARCAM ARCHER ASUKA ATLANTIC AUDINAC AUDIOSONIC AUDIOVOX AUMARK AUTOVOX BARCO BASIC LINE BAUR BAVSONIC BEAUMARK BEC
38. nd press the OK button 3 Select Ves in the confirmation message and press the Gr button 4 Enter password using the NUMERICAL 0 9 button to delete the current channel and move to the next channel GB21 5 Channel List 3 tvpes of channel lists are provided for easv and quick channel searching TV The list of all TV channels with 2 sub groups one is sorted bv channel number the other is sorted bv channel name Radio The list of all Radio channels with 2 sub groups one is sorted bv channel number the other is sorted bv channel name Favourite The list of the favourite channels with 5 sub groups that You can organise channels by your private taste 5 1 Displaying and Switching Channel List You can display channel list using LIST Gsm button and switch into other channel on the channel list 1 Press the LIST Gist button while watching a programme to display the selected channel list 2 Select your desired channel using the w button and press the button to change the channel 3 Enter the channel numeric directly using NUMERICAL 0 9 button to move cursor into your desired channel And then press the OK button to change into the selected channel 4 Select On by going to MENU Preferences Miscellaneous Settings Option in CH Listto display scramble icon in the channel list Select OFF by going to MENU Preferences Miscellaneous Settings Optoin in CH Li
39. nformation is provided 6 Channel looping mode and Channel List Name if vou select Within the current channel list selecting MENU Edit channels Channel Change Mode the of Channel looping mode is displaved And channel list which vou selected is displaved 7 Programme broadcasting time and progress bar displavs programme plaving time and progress bar 8 Next programme Information displaved if next programme information is provided Press the jp button to display the next programme information Note If there is no available programme information programme information is not displayed 2 Detail Programme Information You can see detailed information about the current programme Press the i button where I plate is displayed to view detailed information Note Press the i button again to hide the information box e If the Detail information is more than one page use a w button to move to the previous or next page GB 19 4 Basic Operation 4 7 Option List Vou can view and confirm detailed information about the current channel and change the information necessary Note Press the button when the channel list is displayed to view Option List Then the following functions in the option list are performed to the current channel where cursor is located 1 Add channel to favourite group You can add current channels to the favourite group immediately
40. ng Transport Stream 1 4 1 8 1 16 amp 1 32 MPEG 2 ISO IEC 13818 Profile Level MPEG2 MPOML Input Rate 15 Mbit s Max Aspect Ratio 4 3 16 9 Letter box Video Resolution 720 576 Audio Decoding MPEG MusiCam Layer amp II Audio Mode Single Dual mono Stereo Joint stereo GB 66 Flash Memorv 4 Mbvtes Graphics MPEG amp System Memory 16 Mbytes EEPROM 8 Kbytes RF Modulator A V amp Data In Out RF Loop through Output Connector 750 IEC 169 2 Frequency 470 862 MHz Output Channel CH 21 69 TV standard PAL I G B Preset Channel CH 36 Power Supply Input Voltage Video 1 Output RCA Audio R L 2 Output RCA RS 232C Transfer Rate 115 200 bps 3 pin Socket type AC 90 250V 50 60Hz Type Switching Mode Power Supply SMPS Power Consumption Operation mode Max 11 W Stand by mode Max 7 5 W Protection Physical Specification Size Separate internal fuse amp Lightning protection 260 mm X 50 mm X 182 mm Weight Net 1 2 kg Operating Temperature 45 C Storage Temperature 10 C to 70 C GB 67 16 Glossarv device that collects and amplifies electromagnetic waves Also called Antenna Coaxial cable A specially designed and shields cable that can transport signals with high frequency Frequency The n
41. nutes to 1 hour 3 Select your GMT offset using the 4 jp buttons and press the OK button Note e The current time is set automatically whenever GMT Offset changes The default item is Auto If GMT Offset is Auto it is automatically set depending on your country 2 Power On You can set the time when the product is automatically powered on 1 Select Power On using the a w button and press the y or OK button 2 Select either Enable or Disable the Power On Control Enable Uses the Power On Control and sets the Power on time Disable uses the Power On Control 3 If Enable has been selected enter the Channel No and Time using the NUMERICAL 0 9 buttons 4 and press the OK button Channel No 001 Time 08 00 11 26 GB 39 7 Setting Preferences 3 Power Off You can set the time when the product is automatically powered off 1 Select Power Off using the w button and press the jp or OK button 2 Select either Enable or Disable the Power Off using the w button and press the OK button Enable Uses the Power Off and sets the Power Off time Disable Not uses the Power Off 3 If Enable has been selected enter the using the NUMERICAL 0 9 buttons and press the OK button Note Once Power On Off is specified it is repeated everyday 7 4 Schedule You can reserve a programme to watch programme at yo
42. on Then select Delete and press Total the OK button To delete all channels select Select n kem All to select all channels select Delete and press the fs OK button 4 When completing Channel Search and deleting unnecessary channels select Save to save the changes GB 44 8 2 Manual Search You can search channels manually by searching parameters if you know the MUX information 1 Channel Number Enter your desired frequency channel to search When entering frequency channel value the appropriate frequency value is entered 1 Select Channel using the w button and press the OK or jp button 2 Select of channel using the w button and press the OK button 2 Frequency Enter the your desired frequency to search directly When entering frequency the appropriate channel for the entered frequency is automatically displayed on Channel 1 Select Frequency using the w button and press the OK or jp button 2 Enter frequency using the NUMERICAL 0 9 button and press OK 9 button Required for Channel Search If you don t know the value please select Auto 1 Select Mode using the w button and press the OK button 2 Select among Auto 2k and 8k using the w button and press the button GB 45 8 Installation 4 Guard Interval Required for Channel Search If vou don t know the value please select A
43. owing web sites and call center Hotline Please trv to contact to vour local dealers first when vou have anv problem Web site and e mail Homepage http www humaxdigital com http www humaxdigital com Deutsch http www humaxarabia com HCSA Humax Customer Service Area Software Download Information and Technical Q amp A http www humaxdigital com hesa http Awww humaxdigital com Deutsch hcsa E mail Technical Q amp A tech info humax digital co uk techinfo humax digital de callcenterME humaxdigital com Webmaster humaxdigital com English Deutsch Arabic English Deutsch Europe amp North Africa Germany Middle East Asia amp Other area GB 69 17 Service and Support Call Center Humax Middle East Call Center Dubai UAE Tel E mail Open Support Language 4971 0 4 359 2323 Open 9 00 20 00 close on Fridav callcenterME humaxdigital com Local Time in Dubai GMT 4 9 00 20 00 Saturday Thursday close on Friday English Arabic Humax Hotline Germany Germany Other Countries Open Support Language 01805 778 870 0 12 Min 49 1805 778 870 0 12 Min International Call Charge Local Time in Germany GMT 1 8 00 20 00 Monday Friday 8 00 18 00 Saturday Deutsch English Humax BTCI Hotline Premiere Model Germany Austria 01805 778900 0 12 Min 0900 900633 0 33 Min For hardware repair please refer to s
44. re or shock LIQUIDS The receiver should not be exposed to any liquids such as dripping or splashing In addition no objects filled with liquids such as vase shall be placed on the apparatus CLEANING Disconnect the receiver from the wall outlet before cleaning Use a light damp cloth no solvents to dust the receiver VENTILATION The slots on top of the receiver must be left uncovered to allow proper airflow to the unit Do not stand the receiver on soft furnishings or carpets Do not stack electronic equipments on top of the receiver ATTACHMENTS Do not use any unsupported attachments as these may be hazardous or cause damage the receiver CONNECTION TO THE AERIAL Disconnect the receiver from the mains before connecting or disconnecting the cable from the aerial Failure to do so can damage the aerial CONNECTION TO THE TV Disconnect the receiver from the mains before connecting or disconnecting the cable from the aerial Failure to do so can damage the TV EARTHING The aerial cable must be buried in the ground The buried cable of the system must comply with SABS 061 GB 3 Safetv and Warning 10 LOCATION 1 Place the receiver indoors to avoid exposing it to lightening rain or sun Do not place it near a radiator or heat register Make sure it has more than 10 cm clearance from anv appliances susceptible to electromagnetic influences such as TV and VCR Do not block these opening
45. release software downloading via a designated aerial 3 The equipment must be tuned properly to the same aerial that the manufacturer uses 4 Update software when the quality of receiving signal strength is high If the weather is not so good that the quality of receiving signal strength is not recommendable perform the software upgrade later Caution Please be careful to keep the power and the power cord plugged in during software update If the power is off during software update it may cause fatal damage to the product Please be careful not to pull out the Signal line co axial Cable during software update Update may be interrupted and the product may not work The product cannot work at all during software update It may take 5 10 minutes to update software Scheduling operation cannot work during software update A message will be displayed to notify that new software is found Select Yes and press the OK button to update the software Starts downloading new software Please wait until the updated is completed When completing the software update the equipment is automatically powered off and on again PONS GB 48 2 If updating software from Menu 1 Press the MENU button 2 Select Installation using the a w button and press the OK or jp button 3 Enter Password using the NUMERICAL 0 9 buttons 4 Select Software Update using the a w button and press the or jp
46. s with anv object and do not place the product on a bed sofa rug or other similar surface If you place the product a rack or bookcase ensure that there is adequate ventilation and that you have followed the manufacturer s instructions for mounting Do not place the product on an unstable cart stand tripod bracket or table where it can fall A falling product can cause serious injury to a child or adult and serious damage to the appliance LIGHTNING STORM or NOT IN USE Unplug the product from the wall outlet and disconnect the aerial during a lightning storm or when left unattended and unused for long periods of time This will prevent damage to the unit due to lightning and power line surges 12 EXTRANEOUS OBJECTS Do not insert anything through the openings in the unit where they can touch dangerous voltage point or damage parts 13 REPLACEMENT of PARTS When the replacement parts are required be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part Unauthorised substitutions may result in additional damage to the unit Warning 1 Follow these directions in order not to damage the power cord or plug Do not modify or process the power cord or plug arbitrarily Do not bend or twist the power cord too much Make sure to disconnect the power cord with the plug held Keep heating appliances as far as possible from the pow
47. sing the 4 button and PES T UN the NUMERICAL 0 9 button seme 3 Enter your desired End Time using the button and j e m the NUMERICAL 0 9 button 4 Select of repeat mode options among Once Daily and Weekly using the 4 j button 5 Select the Save button and press the OK button to complete entering 6 Select the Cancel button and press the OK button to cancel the reservation You can reserve up to 20 programmes f your desired programmed is already reserved adjust the reservation appropriately If the channel is locked restricted by watching time you will be prompted to enter your Password to complete the reservation GB 34 7 Setting Preferences Vou can set censorship watching time and all other items suitable for vour environment Note Press the BACK 4 button to save the changes and return to the previous menu Press the MENU or EXIT button to exit the Menu screen You can easily select any item from the menu using the NUMERICAL 0 9 buttons 7 1 Parental Control You can set parental control for each programme and watching time You can also change your Password 1 Press the MENU button 2 Select the Preferences using the w button and press the OK or jp button 3 Select the Parental Control using the a w button and qd press the OK or p button 2 Miscellaneous settings 4 When a prompting message is
48. stto display only channel list without scramble icon Note If there are multiple channels press the PAGE PAGE 69 67 button to move by channel Whenever you press the TV RADIO Gw button while the channel list is displayed the channel list will be switched between TV and Radio channel list GB 22 62 Premiere Start 43 13th Street 64 K Toon 65 Planet 5 2 Changing Channel List Group Vou can select channel list bv group 1 Press the jp button while the channel list is displaved to view the group list GER 2 Select your desired channel group using the a w button to display its sub groups 3 Press the OK or jp button select your desired sub group using the A w button and then press the OK button 4 The channel list for the selected sub group is displayed Father 92 19th Street Sky World News Today 9 00 10 30 5 The sub group of Favourite channel list exist or not depending on vour configuration If Within the Current Channel List option is selected from MENU Edit channels Channel Change Mode menu you can only change programme within the selected channel list using the CH CH 62 6 while your watching a programme GB 23 5 Channel List 5 3 Edit Channels Vou can edit all channels or each channel bv channel list group 1 Press the MENU button 2 Select Edit Channels using the a w button and press the OK or jp
49. the w button and press the OK or button 2 Select one option among PAL I PAL G PAL B using the w button and press the OK button You can adjust fine tuning setting 1 Select UHF Offset using the a w button and press the or y button 2 Select a range between 4 4 using the a w button and press the OK button GB 42 7 7 Miscellaneous Settings 1 Press the MENU button 2 Select Preferences using the w button and press the OK or p button 3 Select Miscellaneous Settings using the A w button and press the OK or jp button 1 i Plate Display Time Vou can set the duration during which the Information box is to be displaved when vou switch the channel 1 Select i Plate Display Time using the a w button and press the OK or jp button 2 Select a value between 1 20 seconds using the a w button and press the OK button Note When it is set to Disable the i Plate will not be displayed when you switch the channel 2 OSD Transparencv Vou can set the transparencv of On Screen Displav 1 Select OSD Transparency using the a w button and press the or jp button 2 Select one option among Disable 25 50 75 using the a w button and press the OK 68 button Disable Fully opaque screen 25 50 75 As the number is bigger the screen is more transparent 3 Option in CH List You can set the option of scrambled icon in the Option in
50. to perform restoring 4 Default Setting 7 When completing the default setting press the OK button to automatically run the Installation Wizard Installation Wizard When default setting is completed Installation Wizard is automatically displayed which helps Channel Search For detailed information about Installation Wizard refer to 3 Installation Wizard GB 47 9 Software Update In order to maintain proper performance of this product it is essential to have the most up to date software The latest news and release of software versions mav be found at Humax website http www humaxdigital com It is recommended that vou periodicallv check for the availabilitv of software upgrade 9 1 OTA Over the Air OTA an abbreviation of over the air means that downloads the software where the manufacturer reserves the right to decide when and where to release through aerial Over the Air OTA is simply another alternative for downloading software versions However the manufacturer reserves the right to decide when and where this software update can take place by beaming latest software versions over the air via aerial The software update via aerial will only occur under the following circumstances 1 The equipment should have appropriate loader software Caution Please note that if you don t have normal loader software the equipment may not be updated or work after software update 2 The manufacturer decides to
51. ton voter Father Tom 1 Favourite 4 4 ite Sort a channel list You can sort all TV or Radio channel lists by channel number or name for easy Favourite channel searching If channel lists are sorted by channel number 88 is displayed When you press this button all the channel lists are sorted by name Or if channel lists are sorted by channel name is switched into 08 Press this button to order channels by number Unselect all the selected channels Press button to unselect all the selected channel GB 28 5 5 Channel Change Mode You can change the channel either in the group or in the entire groups while watching a programme 1 Press the MENU amp button 4 Channel Change Mode 2 Select Channel Change Mode using the a w button sek your Ganna mode and press the 6 or jp button 3 Select All Channels or within the current channel list using the w button and press the OK button Note When Within the current channel list in Favourite Group option is selected you can only change the channel within the current channel list To change the channel in another channel list in which the current channel list is not located change the channel list or select All channels option GB 29 6 Programme Guide The Programme Guide displavs programme information about each channel based on the date and time Vou can also schedule vour watching using the information give
52. umber of cycles or events per one second which is expressed in the unit of hertz FTA Free To Air An unscrambled broadcast which you can view without additional payments to a service provider MUX The transmitter frequency channel where the programme provider operator transmit a package of digital channels services Usually there are several MUX frequencies with different or same content Network The collection of channels services that a programme provider operator offer These services may be transmitted from one or several MUXes In the transmitted data stream the operator may transmit a service information table network information that is informing the digital terrestrial receiver about all available services in the network OSD On Screen Display The function that displays the information about the monitor that the user needs or has to know on the screen directly OSD information includes brightness contrast tuning RGB adjustment and screen size and positions top left width and height and so on OTA Over The Air Means that software downloads where the manufacturer reserves the right to decide when and where to release them through aerial SCART A 21 pin connector used for connection of this product VCR and TV Also called Euroconnector or Peritel connector GB 68 17 Service and Support Vou can get information such as a troubleshooting guide software upgrades and product support guide from the foll
53. upport website Homepage or HCSA GB 70 www humaxdigital com HNF2FOXT 100GB
54. ur desired time 1 Press the MENU button 4 Schedule 2 Select Preferences using the a w button and on press the OK or jp button 2 3 Select Schedule using the w button and press the OK or jp button 4 Reserved Pregoramme List is displayed on the screen To edit the existing reservation select vour desired reservation and press the OK button To add a new reservation select a blank list and press the button Note For detailed information about Schedule refer to Chapter 6 3 Viewing Reserved Programme 7 5 A V Control You can set Audio or Video Output Control 1 Press the MENU amp button 2 Select Preferences using the a w button and press the OK or y button 3 Select AV Control using the A w button and press the OK or jp button amp Display Format Full Frame GB 40 1 TV SCART VCR SCART You set TV VCR SCART Output 1 Select TV SCART or VCR SCART w button and press the OK 69 or jp button 2 Select one option using the 4 button and press the OK 69 or jp button 2 Audio Output Set the Audio Output 1 Select Audio Output a w button and press the or jp button 2 Select one option form Stereo or Mono using the a w button 3 Screen Ratio Vou can set the aspect ratio of vour TV 1 Select Screen Ratio w button and press the or jp button 2 Select one option from 4 3 or 16
55. ures you can access them Teletext services often load automatically shortly after the Digital Teletext window is displayed In which case simply follow the given instructions press color buttons 1 Press TEXT Gea button to access teletext MHEG features 2 Press TEXT Gea button again to return to normal viewing 3 Press the CH CH 62 69 button to exit this service Note You should select OFF from the subtitle language to display MHEG OSD GB 16 4 Basic Operation 4 4 Change the Subtitle Language If the current programme provides Subtitle information you can select the language for the Subtitle 1 Press the SUBTITLE button to display the subtitle Subtitle language list s las German 2 Select your desired subtitle language using the a w French button and press the button Then the subtitle will be displayed in the selected language at the bottom of the screen 3 Select OFF from the subtitle language list not to display subtitle from the screen Note You can select a default subtitle language by selecting MENU Preferences Language Setting Subtitle Language The subtitle set up as the value of MENU when you change channel and turn on or off power 4 5 Change a Audio Language If the current programme is available in multiple audio languages you can select the language that you wish to listen in 1 Press the SOUNDTRACK qq button to display soundtrack
56. uto 1 Select Guard Interval using the w button and press the OK or jp button 2 Select one option among Auto 1 4 1 8 1 16 and 1 32 using the a w button and press the OK button 5 Network Search If specified frequency channel information and other channel information are provided together the channel which belongs to other frequency channel is also searched 1 Select Network Search using the w button and press the OK or jp button 2 Select one option between Enable and Disable using the AJ w button GB 46 8 3 Default Setting Default Setting restores the receiver to the default settings Warning Please note that once vou perform Default Setting all data such as Channel List and User Configured data are deleted To perform Factorv Default 1 Press the MENU button Select installation using thea w button and press the All setting values will be returned to the OK or jp button 4 ue coyuvnt tore 3 Enter Password using the NUMERICAL 0 9 button 4 Select Default Setting using the A w button press the OK or button 4 Default Setting 5 Select Yes and press the OK button to restore all setting to Factory Default Select No and press the or BACK button to IN you want to reset all return to the previous menu 6 Confirm again to start loading default setting Enter Password using the NUMERICAL 0 9 button
Download Pdf Manuals
Related Search