EasyLED Gebrauchsanweisung englisch Mar 09
Contents
1. Transmitted Light Stage Holding arms for Spot illumination 4 including controller and power supply M6 thread 600120 Polarisation filter attachment for transmitted light stage Color filter for spot red 6 Color filter for spot green Color filte 6 Adapters for different microscope objectives and stands are available upon request r for spot blue OX 15 16 EasyLED Operating Instructions SCHOTT AG Business Unit Lighting and Imaging Otto Schott Strasse 2 55127 Mainz GERMANY Tel 49 0 6131 66 0 16 162. brightness adjustment do not differ from the basic version See the description in the above section entitled Ringlight Additional functions The EasyLED Ringlight Plus has an additional function for controlling segments which makes it possible to regulate the LED ring individual segments each with 12 LEDs using a jog dial switch 6 In this way full circle semi circle quarter circle and two quarter circles illumination as well as rotation in both directions can be achieved Adjustment of segment mode Pressing the jog dial switch 6 once changes the illumination to semi circle mode twice to quarter circle mode three times to two quarter circle mode and a final time back to full circle mode When first switched on the ringlight always starts in full circle mode F Full circle Semi circle Quarter circle Two mode mode mode quarter circle mode homogeneous oblique planar oblique incident oblique bilateral incident brightfield incident brightfield brightfield illumination incident brightfield illumination illumination e g gooseneck illumination ringlight light line e g dual gooseneck 8 16 EasyLED Operating Instructions Manual rotation Each seesawing of the jog dial switch 6 to the right rotates the illuminated LED circle segment in 1 8 steps to the right Each seesawing of the jog dial switch wheel 6 to the left rotates the illuminated LED cir
3. EasyLED Operating Instructions SCHOTT EasyLED Series LED illumination system for stereomicroscopy OPERATING INSTRUCTIONS SS LH LL Status Mar 2009 1 16 EasyLED Operating Instructions Contents 1 SV SICM TOS SCI OU OM a5 3 2 wusicadgeu adr m 4 3 IporFtertintoriallolias 5 4 Start up procedure and 7 5 Mantena NGO PE 13 6 TOC ANIC OANA A 13 a Replacement parts and 15 2 16 EasyLED Operating Instructions 1 System description The EasyLED Series is an illumination system using white LEDs specially developed for the field of stereomicroscopy in industrial and laboratory applications The series comprises e Ringlight Ringlight Plus e Transmitted Light Stage B e Spot Illumination Double Spot Illumination C Comment The systems Ringlight Ringlight Plus Transmitted Light Stage and Spot Illumination Double Spot Illumination can be operated separately The respective operating is described in the suitable part of this users manual With the help of cutting edge technology high brightness LEDs are integrated with control electronics in the head of the ringlight and transmitted light stage
4. cle segment in 1 8 steps to the left Automatic rotation When the job dial switch 6 is pressed for more than 2 seconds to the right the illuminated LED circle segment begins to automatically rotate in 1 8 circle steps to the right When the job dial switch 6 is pressed for more than 2 seconds to the left the illuminated LED circle segment begins to automatically rotate in 1 8 circle steps to the left Automatic rotation stops as soon as the jog dial switch is switched arbitrarily Jog Dial Switch ai SESE ag Rotation Rotation to the right Pressing to the left Adjustment of segment mode 9 16 EasyLED Operating Instructions Transmitted Light Stage Insert the hollow plug 1 of the power supply F into the DC socket provided on the Transmitted Light Stage B The plug connection of the power supply is interchangeable for the EU UK US or AU This is connected to the mains supply 100 240 V AC 50 60 Hz Position or attach the Transmitted Light Stage B in the notch provided on the microscope stand so that the green control light 9 is facing the user he basic version of the transmitted light stage B has an 84 mm diameter To connect stands with different notch diameters Transmitted Light Stages with correspondingly matched adapter feet are available see Point 7 of these operating instructions switch on the Transmitted Light Stage B by flicking the switch 8 and set the required b
5. e page 11 The double spot controller H has connector sockets for each jack 11 After turning on the double spot illumination at the switch 14 the brightness of both spots C can be adjusted by turning the knob 15 It is not possible to separately control the individual spots 12 16 EasyLED Operating Instructions 5 Maintenance The EasyLED Series is maintenance free To clean the outside of the components please use a soft dry cloth or commercially available plastic cleaning cloths The use of cleaning agents alcohol or any other chemicals is not permitted 6 Technical data Ringlight A Diodes Color temperature Lifetime Working distance Max illuminance Dimensions Controller Supply voltage Current Connection Am bient temperature Relative air hum idity Air pressure Conformity 45 High Brightness LEDs ca 5600 K 50 000 h 55 mm 135 mm 90 klx at 75 mm working distance outer 114 mm inner 66 mm height 29 mm integrated dimmable 095 10096 12 VDC 460 mA DC socket for pin 1 7 mm 5 40 C 31 ambient temperature 85 40 ambient temperature 75 700 hPa 1060 hPa Ringlight Plus Diodes Color temperature Lifetime Working distance Max illuminance Dimensions Controller Supply voltage Current Connection Am bient temperature Relative air hum idity Air pressure Conformity 48 High Brig
6. htness LEDs ca 5600 K 50 000 h 50 130 mm 140 klx at 65 mm working distance outerO 114 mm inner 66 mm height 29 mm integrated dim m able 0 100 12 VDC 460 mA DC socket for pinO 1 7 mm 5 40 C to 31 C ambient temperature 85 up to 40 C ambient temperature 75 700 hPa 1060 hPa CE 13 16 EasyLED Operating Instructions Transmitted Light Stage B Diodes 39 SMD LEDS Color temperature ca 5600 K Life time 50 000 h Illuminated surface 50mm Max luminance 12 000 cd m2 Dimensions 84 mm hight 16 mm Controller integrated dimm able 0 100 Supply voltage 12 VDC Current 400 mA Connection DC socket for pin 1 7 mm Ambient tem perature 5 C 40 C Relative air humidity up to 31 C ambient temperature 85 up to 40 C ambient temperature 75 Air pressure 700 hPa 1060 hPa Conform ity CE Diode 1 High Brightness Power LED Color temperature 5600 Life time 50 000 h light flux 40 Im Dim ensions 24 mm height 50 Connection 2 5 mm Stereo jack plug Fitting M6 threat Ambient tem perature 5 C 40 C Relative air humidity up to 31 C ambient temperature 85 up to 40 C ambient temperature 75 Air pressure 700 hPa 1060 hPa Conform ity CE Dimensions 54x35 x30 mm Connection DC socket for pin 2 1 mm 2 5 mm Stereo jack plug socket Supply voltage 5VDC Current 600 mA Amb
7. ient temperature 5 C 40 C Relative air humidity up to 31 C ambient temperature 85 up to 40 C ambient temperature 75 Air pressure 700 hPa 1060 hPa Conform ity CE Plug connection interchangeable for EU UK US AU Input voltage 100 240 V Input current 0 25 A Mains freguency 50 60 Hz Power input 12 18 VA Output voltage current 5VDC 1 0A Output 5 W Protection class II Conformity CE UL PSE Power supply unit for ringlight and transmitted light stage Plug connection interchangeable for EU UK US AU Input voltage 100 240V Input current 0 5 A Mains frequency 50 60 Hz Output voltage current 12 V DC 0 84 A Output 11 W Protection class lI Conform ity CE UL PSE 14 16 EasyLED Operating Instructions Controller for Double Spot Illumination H Dimensions 61x47 x38 mm Connection DC socket for pin 2 1 mm 2 x 2 5 mm Stereo jack plug socket Supply voltage 5 VDC Current 1000 mA Ambient tem perature 5 C 40 C Relative air humidity up to 31 C ambient temperature 85 up to 40 C ambient temperature 75 Air pressure 700 hPa 1060 hPa Conform ity CE The right is reserved to make changes in the design and supplied items within the scope of on going technical development T Replacement parts and accessories Product Description At N Spot illumination including controller and power supply M6 thread 600100 Double spot illumination
8. illumination units The spot illumination double spot illumination is controlled via a compact minicontroller D H The product range makes its mark with easy and ergonomic operation The EasyLED System operates with direct current and is therefore suitable for use with digital cameras Continuous dimming Is possible and the system has a separate mains switch meaning brightness settings can be stored Thanks to neutral white LEDS approx 5600 K images with excellent color fidelity can be produced The power supplies with wide range input E F which can be used in the 100 240 V voltage range can power the ringlight transmitted light range and spot illumination at any one time and are supplied with clip in connectors making operation worldwide possible The black anodized metal housing and effectively designed heat sinks keep the LEDs cool and provide for a lifetime of over 30 000 hours The EasyLED System can be integrated into the stereomicroscopes of all leading manufacturers by way of a practical ringlight adapter and holding arm G for the spot illumination see Point 7 of these operating instructions In addition suitable polarizing filters and color filters as well as protection glasses and diffusors are available for relevant applications See Point 7 of these operating instructions The SCHOTT EasyLED Series stands for excellent quality and remarkable design 3 16 EasyLED Operating Instructions 2 System o
9. ook directly into the LEDs also with optical devices when the illumination is switched on danger of ophthalmic injury To avoid unnecessary stressing of your specimen by illumination with visible light reduce the brightness and duration of illumination to the minimum required 5 16 EasyLED Operating Instructions Important information A Please ensure the appliances are only used with the power supplies and cables specified by SCHOTT only then are faultless operation and conformity with standards guaranteed Please take care that the power supplies with wide range input are only operated with the specified mains voltage The illumination units have been developed for operation in dry rooms only The system must not be used in explosive areas Safe disconnection from the power supply takes place only by pulling out the mains plug Before setting up dismantling or modifying the system always switch off the appliances and pull out the mains plug Neither the power supplies nor the illumination units should be opened or dismantled Technical modifications are forbidden Repairs must only be carried out by the manufacturer or by its authorized customer service agency Please ensure that every user of the system has quick access to these operating instructions The manufacturer is not liable for damage caused by failure to obey these instructions Information for operating the transmitted light basis The transmitted ligh
10. rightness by adjusting the thumb wheel 7 When the appliance is switched on the green control light 9 is lit 10 16 EasyLED Operating Instructions Spot illumination Screw one end of the holding arm G with M6 thread 10 as far as It will go into the M6 thread provided on the housing of the spot illumination C 10 Screw the other end of the holding arm G as far as it will go either into the M6 thread provided on the foot stand 16 or into a suitable thread on the stand or mount of the microscope 17 By turning the fixing nut 18 clockwise a removing of the holding arm G during application is avoided Holding arms G with different threads are available for different microscopes see Point 7 of these operating instructions Insert the jack plug 11 of the spot illumination C into the socket provided on the controller D Insert the hollow plug 12 of the power supply E into the DC socket provided on the controller D The plug connection of the power supply is interchangable for the EU UK US or AU This is connected the the mains supply 100 240 V AC 50 60 Hz owitch on the spot illumination by flicking the switch 14 and set the required brightness by turning the knob 15 When the appliance is switched on the green control light 13 is lit 11 16 EasyLED Operating Instructions Double Spot Illumination Use the same procedure as for the individual spot illumination se
11. t stage has been developed for operation in a microscope stand or in another metallic heat sink If the transmitted light stage is operated without the heat sink the metal housing can heat up to approx 50 C However the diffuser disc and the specimen field do not heat up to the same level If the housing is accidentally touched the temperature may seem unpleasantly warm but it is technically safe The operation of the illumination is in no way affected 6 16 EasyLED Operating Instructions 4 Start up procedure and operation Ringlight Insert the hollow plug 1 of the power supply F into the DC socket provided on the ringlight A The plug connection of the power supply Is interchangeable for the EU UK US or AU This is connected to the mains supply 100 240 V AC 50 60 Hz Attach the ringlight A to the microscope objective by tightening both thumb screws 2 so that the green control light 4 is facing the user The inner diameter of the ringlight A is 66 mm To connect objectives with other diameters corresponding adapters are available see Point 7 of these operating instructions Switch on the ringlight by flicking the switch 3 and set the required brightness by adjusting the thumb wheel 5 When the appliance is switched on the green control light 4 is lit 7 16 EasyLED Operating Instructions Ringlight Plus Attachment to the microscope objective the power connection on off switching and
12. verview U WD gt TI Ringlight Ringlight Plus Transmitted light stage Spot illumination Controller for spot illumination 5 V DC power supply for spot system 12 V DC power supply for ringlight and transmitted light stage Holding arm for spot illumination Controller for double spot illumination 4 16 EasyLED Operating Instructions 3 Important information In these operating instructions the symbol A warns of a danger spot CAUTION obey documentation Intended use The EasyLED Series is an innovative illumination system using white LEDs developed for the fields of stereomicroscopy and macroscopy The system is intended for use in industrial and laboratory applications Safety information A Please read and follow these instructions carefully The appliance s safety cannot be guaranteed if they are not obeyed In accordance with the EN 60825 1 standard the LED illuminations of the EasyLED Series are classed as products under Laser Class 1M The EasyLED Series illumination system conforms to the requirements of the following European directives 2006 95 EG Low Voltage Directive 2004 108 EG EMV Directive The technical documentation and full compliance to the standards listed below proves the conformity of the illumination system with the essential requirements of the above mentioned EN 61010 1 EN 60825 A1 A2 EN 61326 1 2006 LEDs feature a very high luminance For this reason do not l
Download Pdf Manuals
Related Search