ITA 03 Stand-alone grating laser User manual - Bax
Contents
1. ITA 03 Stand alone grating laser User manual Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Safety instructions A WARNING A Always keep this device away from moisture and rain Hazardous electrical shocks may occur A WARNING A Only connect this device to a matching power outlet This device is intended to work on a specified AC currency Connecting this device to power outlets with other voltages may result in permanent damage and possible hazardous situations such as fire or electrical shocks A WARNING A Be careful with every operation of this device Touching live wires inside and outside the unit may cause hazardous electrical shocks This unit must be operated by or under the supervision of an adult This device is not suitable for children Every person involved with the installation operation and maintenance of this device has to Be qualified Follow the instructions of this manual Make sure there is no damage caused by transport If the device seems damaged from the outside do not use it and contact your dealer for more information and consultation To make sure the device maintains in perfect condition and for safe operation it is necessary for the user to follow the instructions and warning notes of this user manual2. Damage caused by improper use or modifications to the device are not covered by warranty This device does not have any user serviceable parts inside Servicing of this device needs to be done by qualified technicians Important notes regarding safety and health Never let the power cord come in contact with other cables Handle the power cord and all connectors with the mains with caution Never remove any warning or informative labels from the unit The ground contact always needs to be connected Do not cover or remove the ground contact Never leave cables lying around Do not open the device and do not modify any hard or software of this unit Do not insert this object into air vents Do not connect this device to a dimmerpack Do not switch the system on and off frequently as this will reduce the lifespan of the device Do not drive the inputs of the fixture with a signal larger than required to work at full performance Only use this device indoor avoid contact with water moist or other liquids Do not place items filled with liquids on top of the unit Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Avoid nearby flames or heat sources do not place this device near flammable liquids gas or flammable items Always disconnect the
3. device when it is not in use for a longer period or time when servicing is needed or when the device needs cleaning Only handle the power cord by its connectors Never pull the cable to remove a connector from its socket as this could lead to damage and electrical shocks Always operate this device with a stable AC current Always operate this device with the AC ground wire connected to the electrical system s ground Never use other types of cables than specified in the manual do not use defective or bad functioning cables Contact your dealer when the included or required cables do not work properly with this device When the device has been exposed to large temperature differences for example transport from outdoor to indoor do not connect the device immediately Do not activate the unit until it has reached room temperature as moist might build up inside the unit which may cause shortcuts and or electrical shocks Guidelines and types of use This device is intended to be used by professionals on stage in theaters clubs and other equal venues This device is not suitable for children and always needs to be operated by an adult Only use the device when the environment is suitable and will not cause any damage Do not use the product in moist or dusty environments or where long term damage may occur such as indoor swimming pools where chlorine is used Beaches where sand and salt are present Outdoor withou
4. CE Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV
5. avelength spectrum between 400 and 700 nm This laser device has a different type of light source than other lighting products This device is equipped with powerful concentrated laser beams which could cause serious injuries when used incorrectly Laser beams are approximately 1000x more powerful than regular light bulbs This is caused by the very tight projection angle of the laser diode which is far more concentrated than a regular light source The combined power of the laser diode is powerful enough to cause permanent visual loss and other injuries when used incorrectly Harmful laser beams which may cause injury do not feel hot It is possible that laser beams which do not generate noticeable heat cause serious injury In most cases this is visual loss caused by a laser diode because it is focussing on the retina a sensitive part of the eye which is very sensitive to lighting Concentrated laser beams might burn the retina causing permanent visual loss Do not aim this laser device directly into your audience The minimum distance in height between the floor and the laser device should be more than 3 meters A laser operator is required for the operation of this laser device Never leave the laser device running unattended The requirements for laser shows may vary from country to country and even from region to region Contact your local authorities for more information regarding professional laser shows for indoor and outd
6. ection into your audience and it is therefore not recommended especially not on short distance e g a bedroom or living room If you do so Ayra can not be held responsible for any injuries Placement and using the stand or bracket This laser device is not intended for children and must only be used with the supervision of an adult Keep this device out of reach of small children When positioning the laser always use the included tripod stand to aim the laser on a ceiling or wall or use the included bracket to mount this laser device to a ceiling wall lighting stand or truss system Functions explained Auto Music This feature changes between the automatic working mode movement on a predefined speed and the music controlled mode movement based on music sensed by the internal microphone Motor speed This rotatable knob changes the rotation speed from slow to fast in the automatic mode Mic sensitivity This rotatable Knob changes the microphone sensitivity from low to high in the music controlled mode Depending on the placement of your music source you may want to change the sensitivity of the microphone for a more accurate response to the beat of the music ON OFF Strobe ON Activation of the laser with both colours projecting at the same time OFF Turns off the laser device Strobe Activation of the laser with colour change strobe function Any information and illustrations shown in this user manual are subject to c
7. ge do not use it If the unit is not going to be used for a longer period of time disconnect it from the power supply and store it in a dust free environment Always check the unit for possible damage before use If you suspect that something is wrong with the unit do not connect it to a power source When you suspect that your unit is broken or damaged contact your local dealer or a certified technician to inspect the unit Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Device overview Q Di o gt Q ete MIC MIN Tightening knob Cooling fan Adjustable hanging bracket 5V DC input intended for included power adapter Rotation speed min max Auto mode music mode switch Microphone used for music controlled mode Microphone sensitivity min max ON OFF Strobe switch See ae SS Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Setting up the device This laser device can be used in several ways Please pay attention to positioning the laser for your own safety and the safety of your audience Projection of the laser This laser is not intended for proj
8. hange without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Troubleshooting If you have any problems with this laser device consult this troubleshooting section to solve any difficulties with your product If this troubleshooting section does not solve your problem contact your dealer for more information and help This troubleshooting section contains the most frequent problems and is not a complete collection of possible faults defects and solutions The troubleshooting section applies for stand alone laser devices It is possible that not all described problems causes and solutions apply to your situation as product details may vary from product to product Problem Possible Cause Solution Laser device does not activate Power adapter not plugged in to a Check if the laser device is itself or does not produce any light socket or the laser device connected to a wall outlet properly Main fuse blown Check if other appliances connected to the same power source are activated If not check the fuse box of your mains power supply and see if any circuit breakers were activated Broken laser diodes Disconnect the device and contact your local dealer for help and support Laser only projects a static pattern Laser turned to music mode but Increase the music volume or there is no music source place the laser device closer to the music source La
9. oor applications Never point the laser directly to reflective surfaces nearby as this might scatter the laser beams throughout the room Optics guidelines Never cover the beam output of the laser Do not remove or replace the lens Do not touch the lens with your fingers Only clean the lens with a non aggressive solution or a damp cloth Exterior guidelines When used in a hanging position the device always needs to be secured by using a safety cable Attach the safety cable to the provided safety eye with the carabiner hook A safety cable is not included in delivery and can be purchased separately The device must be installed on a flat surface or hanging from a solid construction by using the included bracket Never hold the machine in your hands during use When using the device in a hanging position always mount a G clamp or half coupler to the bracket or use bolts to install the bracket directly to a ceiling or beam Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Box contents Box contents 1x laser device 1x user manual 1x power adapter DC 5V 230V AC 1x foldable stand Unit and accessory inspection Always use the supplied power cable to connect the unit to a power supply If the cable appears broken or has visible dama
10. perature differences Housing Inspect the housing of the device frequently Severe dents cracks and missing screws should be avoided at all costs Do not use the device when the housing is not in optimal condition Contact your dealer or a skilled technician when in doubt about the state of the device Check the fixture and screws for corrosion Corrosion should not be present on the fixture Contact your dealer or a skilled technician when corrosion is found on the fixture Every power or signal chassis connector should be mounted tightly Do not use the device when connectors are loose Do not use the power cord when the cores are visible Contact your dealer for a replacement if needed Avoid the buildup of dust and dirt Clean the exterior of the fixture every month with a dry or damp cloth When using the device intensively the cleaning frequency needs to be increased Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Guidelines for laser devices Laser diode guidelines WARNING This device emits powerful laser beams Do not look directly in the laser beam to avoid possible permanent injury to eyes and skin This is a class 3B laser product This device is a professional show and entertainment laser product The device emits laser beams with a w
11. ser grating lens motor broken Disconnect the device and contact your local dealer for help and support Laser turned to music mode but Increase the sensitivity of the built the sensitivity is too low in microphone by twisting the mic knob on the rear of the device Laser pattern changes too Speed setting set too high low Increase decrease the Speed knob slow fast in auto mode on the rear of the device Any information and illustrations shown in this user manual are subject to change without further notice User manual version 2 0 Creation date author initials 17 12 2013 RV Revision date author initials 18 02 2014 RV Technical specifications 160 mW grating laser Grating technology distributes solid beams into hundreds of small laser beams Fluently moving star sky effect Calm lounge effect Laser power 100mW red 60mW green Laser wavelength 532nm green 650nm red Main switch ON OFF Strobe Working mode auto music Variable rotation speed Built in microphone for music controlled mode Variable microphone sensitivity Fan cooled Pre mounted hanging bracket Included miniature tripod stand can be mounted directly to the bottom of the housing Maximum power consumption 7W Dimensions 125 x 125 x 60 mm without bracket with screw knobs attached Maximum height tripod stand 170 mm Included accessories power adapter tripod stand CLASS III B LASER DEVI
12. t roof protection Indoor areas where intense heat sources are present or where the temperature exceeds levels which are comfortable for humans Only use the included power adapter and only connect the device to a suitable power outlet with the correct output voltage Connecting the device to a power outlet with the wrong type of voltage or using the product with a wrong type of power supply may cause permanent damage to the device Avoid shocks and collision during use and transport Do not transport the device while in use Avoid brute force during the installation and operation of this device Familiarize yourself with the functions of the device before use Do not allow operation of the device by unskilled or unqualified people Use of the device in other ways than described in this user manual may cause damage and injury Ayra does not take responsibility for any damage or injury caused by improper use Storage and transport This device is intended for mobile use When transported use the original packaging of the product ora fitting flightcase preferably filled with foam This device is not intended for permanent use Operation breaks will ensure that the lifespan of the device remains unchanged If the device is not used for a longer period of time disconnect it from its power source and store it in its original packaging or in a fitting flightcase Store the device indoor dry and do not expose the device to extreme tem
Download Pdf Manuals
Related Search