user manual
Contents
1. OPTISource LED light source for wavelength 850 1300 1310 1550 user manual model no 257821 257822 257823 o INNOVATION e Introduction e Features e Key definition e LED definition e OPTISource specifications e Instructions for operation The OPTISouce is a high performance stabilized source that is widely used in fiber network installation and maintenance Hobbes offers 3 models for the Laser source series 850 1300 for multimode 1310 1550 for single mode optical fibers and an all in one model for all 4 wavelengths Hobbes OPTISource series represents advance technology with high performance in fiber loss measurement fiber attenuation measurement and fiber cable identification by using modulated light source Features e Four wavelength 3 model combinations 850 1300 multimode 1310 1550 single mode 850 1300 1310 1550 all in one e C W and 1KHz 2KHz 270Hz modulated signals e Auto identify wavelength indicator Full compatibility with Hobbes Optical Power Meter to be use as a complete set e LED indicators e Auto power off for power saving Key definition Marking Function Light wavelength selection 850nm 1300nm 1310nm 1550nm Modulated signals selection CW 1KHz 2KHz 270Hz Auto identify wavelength indicator Power On Off LED definition Marking Power Function Power Auto On Off Battery low indicator 850nm 1300nm 1310nm 1550nm Wavele2. ff the power switch the auto off function will be activated and turn the unit off within 30 mins Step 2 Selecting the wavelength for 850 1300 1310 1550nm Pressing the button selects a wavelength then the corresponding wavelength LED will light up Step 3 Selecting the modulated frequency signal Press the f button to add the modulated frequency for the fiber Then the corresponding modulated frequency LED will light up Before you start to select any frequencies the modulated condition is CW without any LED lit When you change the frequencies to 1KHz 2KHz or 270Hz signal the modulation frequency will be different note The default frequency is always set to CW Step 4 Auto identify wavelength Pressing the Auto identify button will auto identify the sourcing wavelength the Auto identify LED will light up This function requires a compatible SMARTFiber or SMARTFiber Pro Hobbes SMARTFiber Power Meter as a complete set to identify and automatically switch to a corresponding wavelength without having to select the wavelength manually note This function is not operational on other brand s power meters Optical Fiber Source is classified as a CLASS 1 LASER product But it is highly recommended avoiding exposure to eyes This device is used for its intended purposes only any use of this product other than its intended purpose may or can cause severe harm Use Cautiously War
3. ngth indicators 1KHz 2KHz 270Hz 3 LEDS Modulated signal indicators Auto identify Auto identify wavelength indicator OPTISource Specifications Wavelengths 850 1300nm 1310 1550nm 850 1300 1310 1550nm Spectral width lt 5nm Output power gt 13dBm 850 1300nm gt 5dBm 1310 1550nm 0 15dB 8hr 1310 1550nm 0 25dB 8hr 850 1 300nm Stability HH Connector type FC PC can be exchange SC ST Auto power off 5 min auto power off Frequency 1KHz 2KHz 270Hz Battery 4 AAA battery Instructions for operation Step 1 Select the power switch function to turn unit on off Note The power switch has three functions please follow instructions below for different demands Power On with Auto off Press the Power button for 1 second to turn the unit on note The top LED will be display a Red light indicating the power function is set to Auto off Power On with Auto on Press the Power button and hold for about 4 seconds to deactivate the auto off function note The LED will display a Green light indicating the unit will not turn off automatically Power off Press the Power button and hold for 4 seconds to turn the unit off Battery low indicator The Power LED will blink Red or Green Light to indicate the battery is low Note The signal of the color might be Red or Green base on the auto on off function Safety Feature If you forgot to turn o
4. ning Keep the device safely stored and keep the device away from children Uses Class 1 Laser Radiation DO NOT LOOK DIRECTLY INTO THE LASER BEAM INNOVATION
Download Pdf Manuals
Related Search