NEOS152AXS - Amerco Brasil
Contents
1. aR gt PRONET PRONET software has been designed by Proel s Research amp Development Department to easily control a single unit or a network of devices like active loudspeakers or speaker processors equipped with the C AUDIO CORE digital processing platform PRONET has been developed in collaboration with sound engineers and sound designers in order to offer an easy to use tool to setup and manage your audio system With PRONET you can visualize signal levels monitor internal status and edit all the parameters of each connected device Download the PRONET app from the PROEL website at http www proel com clicking on support section The NEOS AXS loudspeaker devices can be connected using the network connection in this case the PROEL USB2CAN converter optional accessory is needed The first time you connect a device with the USB2CAN converter Windows O S will ask you to install the driver files which you can find in the Driver folder within the Pronet application folder by default is C Program Files Proel Pronet Driver or if you changed it lt your path gt Driver Please refer also to Installation and Drivers paragraphs in the Pronet documentation The PRONET NETWORK is based on a robust reliable and fast communication protocol called CANBUS The devices in a PRONET NETWORK are connected together with a linear bus topology The USB2CAN converter must be connected to the network input of the first device2. gt USER MANUAL NEOS152AX digital self powered loudspeaker KEY FEATURES e Premium transducers e C AUDIO CLASS D power amplifiers with SWITCH MODE power supply e 96KHz 40bit floating point C AUDIO CORE DSP e Network functionality thru PRONET control software e Access to EQ DYNAMICS and DELAY and real time parameter control e Plywood cabinets with die cast handles dual angle pole holder and multiple flying points INTRODUCTION NEOS AXS series represents the highest expression of PROEL GROUP Research amp Development applied in loudspeaker systems A natural evolution of the NEOS Series it incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium sound maximum performance and up to date features NEOS AXS is a complete range of self powered loudspeaker systems combining cutting edge transducers with C AUDIO CLASS D amplifiers and digital processors thus ensuring the best integration between acoustics and electronics for an optimal performance The NEOS AXS are designed for the use both as high performance mobile systems for live applications and as versatile and remotely controllable systems for advanced fixed installations All the models are powered by C AUDIO DA power modules a new generation of CLASS D power amplifiers with SWITCH MODE power supply able to provide an exceptional sound definition together with very high dynamics and low distortion in an ultra compact p
3. purchase and defect detailed description This warranty does not extend to damage resulting from improper installation misuse neglect or abuse Proel S p A will verify damage on returned units and when the unit has been properly used and warranty is still valid then the unit will be replaced or repaired Proel S p A is not responsible for any direct damage or indirect damage caused by product defectiveness e This unit package has been submitted to ISTA 1A integrity tests We suggest you control the unit conditions immediately after unpacking it e If any damage is found immediately advise the dealer Keep all unit packaging parts to allow inspection e Proel is not responsible for any damage that occurs during shipment e Products are sold delivered ex warehouse and shipment is at charge and risk of the buyer e Possible damages to unit should be immediately notified to forwarder Each complaint for package tampered with should be done within eight days from product receipt SAFETY INSTRUCTIONS To reduce the risk close supervision is necessary when the product is used near children Protect the apparatus from atmospheric agents and keep it away from water rain and high humidity places This product should be site away from heat sources such as radiators lamps and any other device that generate heat This product should be located so that its location or position does not interfere with its proper ventilatio
4. the network output of the first device is connected to the input of the second and so on For the network connections simple RJ45 cat 5 or cat 6 ethernet cables can be used please don t confuse a ethernet network with a PRONET network these are completely different and must be fully separated also both use the same kind of cable The beginning and the end of a PRONET NETWORK must be terminated One side is terminated by the USB2CAN converter the other side must be terminated pressing the TERMINATE switch on the last device All devices between these two points must have the TERMINATE switch lifted Assign the ID number To work properly in a PRONET network each connected device must have a unique identifier number called ID By default the USB2CAN PC controller has ID 0 and there can be only one PC controller Every other device connected must have its own unique ID equal or greater than 1 in the network cannot exist two devices with the same ID An ID number is assigned automatically to each devices when they are turned on for the first time connected to a network In order to correctly assign a new available ID to each device for working properly in a Pronet network follow these instructions 1 Switch off all the devices 2 Connect them correctly to the network cables 3 TERMINATE the latest device in the network connection 4 Switch on the first device keep pressed PRESET button on the control panel 5 Leaving the previous d
5. 0 kohm unbalanced 4 dBu 1 25 V CORE processing 24 bit 96 kHz C AUDIO Class D with SMPS 1000 1000 W IN LINK XLR M XLR F NETWORK IN OUT ETHERCON NE8FAV MAIN LINK PowerCon NAC3MPB MAIN PowerCon NAC3MPA LEVEL PRESET FLAT HPF MONITOR USER TERMINATE GND LIFT Variable speed DC fan 230 VAC or 120 VAC 50 60 Hz 1650 VA 550 VA Trapezoidal taper Monitor taper Pole holder Dimensions W x H x D Weight Frequency Response Diagram 120 0 10 42 1 bottom dual angle 0 7 5 450 x 770 x 490 mm 36 kg 79 4 Ib dBSPL 110 0 100 0 o 40 50 100 200 500 black FLAT gray MONITOR PROEL rTreCHNOLOG as aRI 1k 2k Hz 5k 10k 20k MECHANICAL DRAWING M10 Flying Point 78 0 cm M10 Flying Point OPTIONAL ACCESSORIES M10 Flying point Dual Angle Pole Holder M10 Flying point USB2CAN USB PC PRONET converter for speaker suspending COVERNE152 Loudspeaker soft bag PLH295 M10 50 mm Truss mount coupler FRE300BK Loudspeaker ground stand AC169A M10 black shoulder eyebolt KP210BK Sub Speaker pole AC171 L 75 cm 30 inch Aircraft cable sling PLX20 Professional ground stand with winch AC172 L 1 5 m 4 9 ft Aircraft cable sling KPTNEOS152 Professional Flybar AC173 Screw pin anchor shackle NAC3FCA Neutrik Powercon BLUE POWER IN PLU
6. G AC178 Double point flying stud NAC3FCB Neutrik Powercon WHITE POWER OUT PLUG AC172E 36 cm 14 2 inch Aircraft Cable with Stud see www proel com for detailed description and other available accessories SPARE PARTS 95FTK100 Fly track 100mm NAC3MPA Neutrik Powercon BLUE POWER IN panel socket NAC3MPB Neutrik Powercon WHITE POWER OUT panel socket 91AMD152 Amplifier Module 98ICN152WZ8 15 neodymium woofer 4 VC 98DRI850 2 compression driver titanium diaphragm 3 VC PROEL S gt POWER PANEL CAUTION POWER OUT MAX 10A MAINS IN Anus O CODE NEOS AXS MAINS 230V 50 60 Hz SUPPLY VA SIN 00001 DESIGNED amp ENG D IN ITALY MADE IN g MAINS IN Powercon NAC3FCA power input connector blue To switch the amplifier on insert the Powercon connector and turn it in a clockwise direction into the ON position To switch the amplifier off pull back the switch on the connector and turn the connector in an anti clockwise direction into the POWER OFF position NOTE In the case of product failure or fuse replacement disconnect the unit completely from the mains power The power cable must only be connected to a socket adequate to the specifications indicated on the amplifier unit The power supply must be protected by a suitably rated thermo magnetic breaker Preferably use a suitable switch to power on the whole audio system leaving the Powercon always connected to each speaker this simple
7. ackage The on board control electronics are based on the 96KHz 40bit floating point C AUDIO CORE DSP platform able to optimize further the system performances through the use of sophisticated EQ crossover and dynamics algorithms The CORE processing provides also network functionality through the PRONET control software based on CANBUS communication protocol USB2CAN converter needed The PRONET control software provides access to the major processing features including full PARAMETRIC and DYNAMIC EQ advanced COMPRESSOR LIMITERS and DELAY together with the real time control of parameters such as temperature supply voltage and protections Setting created by the user can be saved in user presets that can be recalled through the control software or from the unit s interface TECHNICAL SPECIFICATION Acoustical Mechanical System type Full range 2 way vented Construction 15 and 18 mm birch plywood Low frequency driver 15 neodymium woofer 4 VC Finish Anti scratch black paint High frequency driver 2 compression driver titanium diaphragm 3 VC Flying hardware 6 x fly tracks side and rear Frequency response Horn type Coverage Max SPL Electrical Input Impedance Input Sensitivity Signal Processing Amplifier type Output power Connectors Controls Cooling Power Supply Max consumption 1 8 power out consumption 40 Hz 20 kHz Asymmetrical rotatable horn 90 gt 60 H x 50 V 132 dB 20 kohm balanced 1
8. evice switched on repeat the previous operation on the next device until the latest device is turned on The Assign ID procedure for a device makes the internal network controller to perform two operations reset the current ID search the first free ID in the network starting from ID 1 If no other devices are connected and powered on the controller assume ID 1 that is the first free ID otherwise it searches the next one left free These operations ensure that every device has it s own unique ID if you need to add a new device to the network you simply repeat the operation of step 4 Every device maintains its ID also when it is turned off because the identifier is stored in the internal memory and it is cleared only by another Assign ID step as explained above This means that if your network is made always of the same devices the assigning ID procedure must be executed only the first time the system is turned on See the more detailed instruction about PRONET on the documentation downloadable from the web site www proel com LIMITED WARRANTY Proel warrants all materials workmanship and proper operation of this product for a period of two years from the original date of purchase If any defects are found in the materials or workmanship or if the product fails to function properly during the applicable warranty period the owner should inform about these defects the dealer or the distributor providing receipt or invoice of date of
9. it can be used for all music genre HPF This LED lights when the HPF preset is selected which is the FLAT preset with an high pass filter added Use this preset when the loudspeaker is combined with subwoofers MON This LED lights when the MONITOR preset is selected Use this preset if the loudspeaker is used as a stage monitor USER This LED lights when the USER preset is loaded This preset corresponds to USER MEMORY no 1 of the DSP and as a factory setting it s the same to FLAT If you want to modify it you have to connect the unit to a PC edit the parameters with PRONET software and save them into USER MEMORY no 1 NETWORK IN OUT These are a standard RJ45 CAT5 connectors with optional NEUTRIK NE8MC RJ45 cable connector carrier used for PRONET network transmission of remote control data over long distance or multiple unit applications TERMINATE In a PRONET network the last connected device must be terminated with an inner load resistance especially in a long run cabling press this switch if you want to terminate the unit INPUT Audio signal input with locking XLR connector It has a fully electronically balanced circuitry including AD conversion for the best S N ratio and input headroom LINK A direct connection from the input connector to link other speakers with same audio signal GND LIFT This switch lift the ground of the balanced audio inputs from the earth ground of the amplifier module PROEL TrTecHNOLOGY as
10. n and heating dissipation Care should be taken so that objects and liquids do not go inside the product The product should be connected to a power supply mains line only of the type described on the operating instructions or as marked on the product Connect the apparatus to a power supply using only power cord included making always sure it is in good conditions WARNING The mains plug is used as disconnect device the disconnect device shall remain readily operable Do not cancel the safety feature assured by means of a polarized line plug one blade wider than the other or with a earth connection Make sure that power supply mains line has a proper earth connection Power supply cord should be unplugged from the outlet during strong thunderstorm or when left unused for a long period of time CE CONFORMITY Proel products comply with directive 2004 108 EC EMC as stated in EN 55103 1 and EN 55103 2 standards and with directive 2006 95 CE LVD as stated in EN 60065 standard PROEL S p A World Headquarter Via alla Ruenia 37 43 64027 Sant Omero Te ITALY Tel 39 0861 81241 Fax 39 0861 887862 www proel com PROEL GY TECHNOLOGY as aR
11. trick extend the life of the Powercon connectors POWER OUT Powercon NAC3FCB power output connector grey This is connected in parallel with the MAINS IN the maximum load applicable is 10A 230V NOTE the number of speaker units that can be connected in sequence depends by the sum of the speaker consumption current PRODUCT LABEL In this label are written the most important information about the active loudspeaker model line voltage consumption serial number CONTROL PANEL PROEL A 6dB FLAT HPF MON USER a on PROT SIGN imit oe SG LEVEL TERMINATE NETWORK IN OUT LINK INPUT ON This LED indicates power on status PROT This red LED lights when the amplifier module is in protect mode for an internal fault and consequently the amplifier is muted SIGN LIMIT This LED lights green to indicate the presence of the signal and lights red when an internal limiter reduces the input level LEVEL This potentiometer attenuates the input level in the most useful range starting from OdB to 20dB with a 6dB attenuation at the centre MODE This button select one of the four preset available if it is pressed when the unit is switched on it forces the internal DSP to re assign an ID to the unit for the PRONET remote control operation FLAT This LED lights when the FLAT preset is selected This is the basic factory preset of the loudspeaker and
Download Pdf Manuals
Related Search